ZH
RU
ES
drop weight test car
drop weight test car, Total:500 items.
In the international standard classification, drop weight test car involves: Paints and varnishes, Testing of metals, Mechanical testing, Equipment for petroleum and natural gas industries, Standardization. General rules, Plastics, Petroleum, petroleum products and natural gas handling equipment, Waxes, bituminous materials and other petroleum products, Equipment for the chemical industry, Rubber and plastics products, Measurement of time, velocity, acceleration, angular velocity, Road vehicle systems, Protection against dangerous goods, Commercial vehicles, Vibrations, shock and vibration measurements, Protection of and in buildings, Reinforced plastics, Printed circuits and boards, Road vehicles in general, Internal combustion engines for road vehicles, Diagnostic, maintenance and test equipment, Pipeline components and pipelines, Road engineering, Products of the textile industry, Agricultural machines, implements and equipment, Motor cycles and mopeds, Tyres, Fuels, Passenger cars. Caravans and light trailers, Raw materials for rubber and plastics, Semiconductor devices, Electric road vehicles, Electrical and electronic testing, Lubricants, industrial oils and related products, Galvanic cells and batteries, Flexible drives and transmissions, Glass, Environmental testing, Shafts and couplings, Products of the chemical industry, Internal combustion engines, Air quality, Industrial trucks, Adhesives, Electrical accessories, Shop fittings, Special purpose vehicles, Mining equipment, Rotating machinery, Electronic component assemblies, Leather technology, Audio, video and audiovisual engineering, Elements of buildings.
Professional Standard - Railway, drop weight test car
International Organization for Standardization (ISO), drop weight test car
- ISO 6272:1993 Paints and varnishes; falling-weight test
- ISO/TR 6272:1979 Paints and varnishes — Falling weight test
- ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
- ISO 6272-2:2002 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
- ISO 6272-1:2002 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
- ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
- ISO 10454:1993 Truck and bus tyres; verifying tyre capabilities; laboratory test methods
- ISO 3894:1977 Road vehicles; Trucks; Wheels/rims; Test methods
- ISO 5287:1985 Narrow V-belt drives for the automotive industry; Fatigue test
Association Francaise de Normalisation, drop weight test car
German Institute for Standardization, drop weight test car
- DIN 52307:1990-03 Dart drop test on safety glass for vehicle glazing
- DIN EN 10274:1999-07 Metallic materials - Drop weight tear test; German version EN 10274:1999
- DIN 52306:1990 Ball drop test on safety glass for vehicle glazing
- DIN 52310:1986 Headform impact test on safety glass for vehicle glazing
- DIN EN 60749-37:2008 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer (IEC 60749-37:2008); German version EN 60749-37:2008
CZ-CSN, drop weight test car
- CSN 42 0346-1979 Metal testing. Determination of transition temperature of structural steels using the bending-impact test of large pieces of original thickness
- CSN 65 6505 Z1-1998
- CSN 65 6505-1996 Automotive fuels. Leaded petroL Requirements and methods of test
Professional Standard - Light Industry, drop weight test car
- QB/T 2918-2007 Case and bag.Test method for impact resistance by means of falling weight
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, drop weight test car
IN-BIS, drop weight test car
Danish Standards Foundation, drop weight test car
- DS/EN 10274:2000 Metallic materials - Drop weight tear test
- DS/EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
- DS/EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
- DS/EN 228:2013 Automotive fuels - Unleaded petrol - Requirements and test methods
- DS/EN 14906:2012 Leather - Leather for automotive - Test methods and testing parameters
Lithuanian Standards Office , drop weight test car
- LST EN 10274-2000 Metallic materials - Drop weight tear test
- LST EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
- LST EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011)
- LST EN 228-2013 Automotive fuels - Unleaded petrol - Requirements and test methods
- LST EN 14906-2012 Leather - Leather for automotive - Test methods and testing parameters
AENOR, drop weight test car
- UNE-EN 10274:1999 METALLIC MATERIALS. DROP WEIGHT TEAR TEST
- UNE-EN ISO 6272-2:2012 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
- UNE-EN ISO 6272-1:2012 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011)
- UNE-EN 228:2013+A1:2017 Automotive fuels - Unleaded petrol - Requirements and test methods
- UNE-EN 14906:2012 Leather - Leather for automotive - Test methods and testing parameters
Professional Standard - Machinery, drop weight test car
- JB/T 12275-2015 Drop-weight impact testing machines used for metallic materials
- JB/T 9389-2008 Specification for falling weight impact testing machines used for non-metallic materials
- JB/T 6914-1993 Performance test method of automobile air conditioner
Professional Standard - Petroleum, drop weight test car
- SY/T 6476-2013 Practice for drop-weight tear tests on steel line pipe
- SY/T 6476-2000 Drop-weight tear tests of steel pipe
- SY/T 6476-2007 Practice for drop-weight tear tests on steel line pipe
- SY 0040-2013 Test method for impact resistance of pipeline anti-corrosion coating (drop weight test method)
- SY/T 0040-2013 Test method for impact resistance of pipeline coatings.(Falling weight test)
- SY/T 0040-1997 Test method for impact resistance of pipeline caotings(Falling weight test)
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, drop weight test car
- GB/T 8363-1987 Metallic materials--Drop-weight tear tests of ferritic steels
- GB/T 8363-2007 Test method for drop-weight tear tests of steel products
- GB/T 14153-1993 General test method for impact resistance of rigid plastics by means of falling weight
- GB/T 6803-1986 Standard method for conducting drop weight test to determine nil ductility transition temperature of ferritic steels
- GB 11548-1989 Test method for impact resistance of rigid plastic sheets (dropping weight method)
- GB/T 11548-1989 Standard test method for impact resistance of rigid plastic sheeting by means of a tup(falling weight)
- GB/T 6803-2008 Test method for drop-weight test to determine nil-ductility transition temperature of ferritic steels
- GB/T 12544-2012 Measurement of maximum speed of motor vehicles
- GB/T 12544-1990 Motor vehicles--M!ximum speed--Test method
- GB/T 20624.1-2006 Paints and varnishes. Rapid-deformation(impact resistance) tests. Part 1: Falling-weight test, large-area indenter
- GB/T 20624.2-2006 Paints and varnishes. Rapid-deformation(impact resistance) tests. Part 2: Falling-weight test, small-area indenter
- GB/T 12536-1990 Motor vehicles--Coastdown--Test method
- GB/T 23931-2009 Tri-wheel vehicles.Test method
- GB/T 30195-2023 Pendulum test method for impact resistance performance of passenger car tires
- GB/T 12547-2009 Minimum stable speed test method for motor vehicles
- GB/T 12547-1990 Motor vehicles--Minimum stable speed--Test method
- GB/T 12539-2018 Motor vehicles steep hill climbing test method
- GB/T 12539-1990 Motor vehicles--Steep hill climbing--Test method
- GB/T 12541-2023 Automobile Passability Test Method
- GB/T 4970-2009 Method of running test.Automotive ride comfort
- GB/T 26778-2023 Performance requirements and test methods for automobiles and trains
- GB/T 26778-2011 Combination of vehicle performance requirements and test method
- GB/T 18388-2001 Electric vehicles--Engineering approval evaluation program
- GB/T 11545-1996 V-belt drives for the automotive industry--Fatigue test
- GB/T 12534-1990 Motor vehicles--General rules of road test method
- GB/T 12535-1990 Motor vehicles--Starting performance--Test methods
- GB/T 12537-1990 Motor vehicles--Towing performance--Test method
- GB/T 1332-1991 Trucks--Engineering approval evaluation program
- GB/T 12543-2009 Acceleration performance test method for motor vehicles
- GB/T 18388-2005 Electric vehicles-Engineering approval evaluation program
- GB/T 12535-2007 Motor vehicle Starting performance Test method
- GB/T 12546-2007 Motor vehicle.Ventilation and heat insulation.Test method
- GB/T 12546-1990 Motor vehicles--Ventilation and heat insulation--Test method
- GB/T 12543-1990 Motor vehicles--Acceleration performance--Test method
- GB/T 12782-1991 Motor vehicle--Heating performance--Test method
- GB/T 6323.1-1994 Controllability and stability test procedure for automobiles- Pylon course slalom test
- GB/T 18183-2000 Automotive synchronous belt industry-Fatigue test
- GB/T 18297-2001 Performance test code for road vehicle engines
- GB/T 18505-2001 Dynamic balance test method for motor vehicle tyres
- GB/T 18506-2001 Uniformity test method for motor vehicle tyres
- GB/T 12781-1991 Motor vehicles--Vapor lock for fuel system--Test method
- GB/T 12678-1990 Reliability running test method for automobiles
- GB/T 12679-1990 Motor vehicles--Durability running--Test method
- GB/T 23335-2009 Natural gas vehicles.Engineering approval evaluation program
- GB/T 18505-2013 Dynamic balance test method for motor vehicle tyres
- GB/T 18506-2013 Uniformity test method for motor vehicle tyres
- GB/T 30198-2013 Test method for run-out of motor vehicle tyres
- GB/T 6323-2014 Automobile handling stability test method
- GB/T 12541-1990 Motor vehicles--Passing topography capacity--Test method
- GB/T 5909-1995 Performance requirements and test methods of truck wheels
- GB/T 15088-1994 Motor vehicles-Fifth wheel coupling pins-Strength test
- GB/T 18861-2012 Test methods of rolling resistance for motor vehicle tyres and motorcycle tyres.Multi-point test
- GB/T 18385-2001 Electric vehicles--Power performance--Test method
- GB/T 18861-2002 Test methods of rolling resistance for motor vehicle tyres
- GB/T 19055-2003 Reliability test methods for motor vehicle engines
- GB/T 29041-2012 Road wear testing methods for motor vehicle tyres
National Metrological Technical Specifications of the People's Republic of China, drop weight test car
- JJF 1445-2014 Calibration Specification for Falling Weight Impact Testing Machines
API - American Petroleum Institute, drop weight test car
- API RP 5L3-2014 Drop-Weight Tear Tests on Line Pipe (FOURTH EDITION)
- API RP 5L3 RUSSIAN-2014 Recommended Practice for Conducting Drop-Weight Tear Tests on Line Pipe (ЧЕТВЕРТАЯ РЕДАКЦИЯ)
- API RP 5L3-1996 Recommended Practice for Conducting Drop-Weight Tear Tests on Line Pipe (Third Edition)
- API RP 5L3 RUSSIAN-1996 Recommended Practice for Conducting Drop-Weight Tear Tests on Line Pipe (Third Edition)
- API RP 5L3-1969 Recommended Practice for Conducting Drop-Weight Tear Tests on Line Pipe (First Edition)
- API RP 5L3 KAZAKH-1996 RECOMMENDED PRACTICE FOR CONDUCTING DROP-WEIGHT TEAR TESTS ON LINE PIPE (Third Edition)
- API RP 5L3-1978 RECOMMENDED PRACTICE FOR CONDUCTING DROP-WEIGHT TEAR TESTS ON LINE PIPE SECOND EDITION
American Petroleum Institute (API), drop weight test car
Standard Association of Australia （SAA）, drop weight test car
- AS 1330:2019 Metallic materials — Drop weight tear test for steels
- AS 1580.406.1:2004 Paints and related materials - Methods of test - Resistance to impact - Falling weight test (Gardner-type tester)
- AS/NZS 4347.6:1995 Damp-proof courses and flashings - Methods of test - Determining impact resistance (falling dart impact test)
- AS/NZS 4613:1999 Automotive brake testing equipment - Roller brake tester
国家能源局, drop weight test car
Taiwan Provincial Standard of the People's Republic of China, drop weight test car
- CNS 13784-1996 General Rules for Testing Impact Strength of Rigid Plastic by the Falling Weigth Method
- CNS 2734-1989 Method of Brake Test for Automobiles
- CNS 10713-1983 Method of Service Brake Test for Automobiles-on Brake Tester
- CNS 10703-1993 Method of Pendulum Impact Test for Bumpers of Passenger Cars
- CNS 8566-1986 Method of Test for Air Brakes of Automobiles
- CNS 2736-1994 Method of Coastdown Test for Automobiles
- CNS 2742-1989 Method of Starting Test for Automobiles
- CNS 2740-1989 Method of Traction Test for Automobiles
- CNS 2743-1989 Method of Driving Test for Automobiles
- CNS 2741-1989 Method of Sand Ground Test for Automobiles
- CNS 8950-1986 Method of Test for Fuse of Automobiles
- CNS 2738-1989 Method of Steep Hill Climbing Test for Automobiles
- CNS 2739-1989 Method of Long Hill Climbing Test for Automobiles
- CNS 13307-1993 Method of test for door hinges of automobiles (→CNS 7681)
- CNS 8563-1982 Simulated Mountain Brake Fade Test Procedure
- CNS 13060-1992 Road Vehicle-Techniques of Measurement in Impact test-Instrumentation
- CNS 2731-1997 General rules of running test methods for automobiles
- CNS 2735-1997 Method of acceleration test for automobiles
- CNS 7896-1986 Method of Test for Distributors of Automobiles
- CNS 2737-1989 Method of Maximum Speed Test for Automobiles
- CNS 8564-1982 Simulated Mountain Fade Test Procedure - Dynamometer
- CNS 9990-1983 Method of Performance Test for Oil Seals for Automobiles
- CNS 9382-1988 Method of Test for Multi - Connectors for Automotives
- CNS 9480-1982 Method of Test for Tire Noise for Automobiles
- CNS 12567-1989 Method of Test for Exhausts Concentration for Gasoline Engine Automobiles
- CNS 6168-1987 Method of Test for Spark Plugs for Automobiles
- CNS 13441-1994 Method of Test of Tilt Stability for Automobiles
- CNS 7665-1981 Test Code of Air Cooled Gasoline Engines for Automobiles
- CNS 7666-1981 Test Code of Water Cooled Gasoline Engine for Automobiles
- CNS 10495-1983 Hammering Test Device of Carbon Steel Tyres for Railway Rolling Stock
- CNS 8677-1982 Method of Bench Performance Test for Clutch for Automobiles
- CNS 12173-2005 Test method for brake linings compressibility strain of automobiles
- CNS 12656-1990 Method of Test for Fuel Pump Diaphragms for Automobiles
- CNS 7895-2001 Method of exhaust emission test for gasoline automobiles
- CNS 8808-1997 Method of test for minimum turning radius for automobiles
- CNS 9598-1982 Method of Rigidity Test for Front Axles for Automobiles
- CNS 9248-1998 Method of performance test for steering column of automobiles
- CNS 9244-1982 Pylon Course Slalom Test Procedure for Automobiles
- CNS 9481-1996 Method of Test for Automobile Tire Uniformity
- CNS 6171-1987 Method of Test for Starting Motors of Automobiles
- CNS 6169-1987 Method of Test for Alternators for Automobiles
- CNS 6170-1987 Method of Test for DC Generators of Automobiles
- CNS 10800-1984 Method of Test of Fuel Filters of Automotive Gasoline Engines
- CNS 8242-1988 Method of Warm-up Test of Carburetors for Automobiles
- CNS 10707-1983 Method of Test for Hood Latch System of Automobiles
- CNS 10708-1983 Method of test for side door lock systems of automobiles (→CNS 7681)
- CNS 8951-1982 Heat Dissipation Test Code of Radiators for Automobiles
- CNS 7671-1981 General Rules of Weatherability for Automobile Parts
British Standards Institution (BSI), drop weight test car
- BS 3900-E3:1973 Methods of test for paints - Impact (falling weight) resistance
- BS EN ISO 6272-1:2004 Paints and varnishes - Rapid-deformation (impact resistance) tests - Falling-weight test, large-area indenter
- BS EN 60749-37:2008 Semiconductor
devices — Mechanical
and climatic test
methods —
Part 37: Board level drop test method
using an accelerometer
- BS DD CEN/TS 15293:2011 Automotive fuels. Ethanol (E85) automotive fuel. Requirements and test methods
- BS EN 60749-40:2011 Semiconductor devices. Mechanical and climatic test methods. Board level drop test method using a strain gauge
- BS EN ISO 6272-2:2011 Paints and varnishes. Rapid-deformation (impact resistance) tests. Falling-weight test, small-area indenter
- BS EN ISO 6272-1:2011 Paints and varnishes. Rapid-deformation (impact resistance) tests. Falling-weight test, large-area indenter
American Society for Testing and Materials (ASTM), drop weight test car
- ASTM E436-91(1997) Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels
- ASTM E436-03(2021) Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels
- ASTM G14-04 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
- ASTM G14-88(1996)e1 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
- ASTM G14-04(2018) Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
- ASTM E436-03 Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels
- ASTM G14-04(2010) Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
- ASTM G14-04(2010)e1 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
- ASTM E208-06(2012) Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
- ASTM E680-79(1999) Standard Test Method for Drop Weight Impact Sensitivity Of Solid-Phase Hazardous Materials
- ASTM E680-79(2018) Standard Test Method for Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials
- ASTM E680-79(2011)e1 Standard Test Method for Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials
- ASTM D5628-10 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
- ASTM D4495-00 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
- ASTM D4495-00(2005) Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
- ASTM E208-06 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
- ASTM E2583-07(2015) Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)
- ASTM D4272-08 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
- ASTM D4272-08a Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
- ASTM D4272-14 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
- ASTM D4272/D4272M-15 Standard Test Method for Total Energy Impact of Plastic Films by Dart Drop
- ASTM E208-20e1 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
- ASTM D4495-12 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
- ASTM D5628-07 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
- ASTM D5628-06 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
- ASTM D1424-96 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
- ASTM D1424-96(2004) Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
- ASTM D1424-09 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
- ASTM D1424-09(2013) Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus
- ASTM D5628-96(2001)e1 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
- ASTM D2444-99(2005) Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
- ASTM F736-17(2023) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
- ASTM D2463-15 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
- ASTM D2263-68e1 Methods of Testing Automotive Fabrics
- ASTM D1424-07a Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus
- ASTM F736-95(2001) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
- ASTM F736-95(2006) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
- ASTM D2444-99(2010) Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
- ASTM D4495-21 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
- ASTM D1424-09(2013)e1 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus
- ASTM F736-95(2011) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
- ASTM D5420-98a Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
- ASTM D5734-95(2001) Standard Test Method for Tearing Strength of Nonwoven Fabrics by Falling-Pendulum (Elmendorf) Apparatus
- ASTM D5420-04 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
- ASTM D5420-10 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
Korean Agency for Technology and Standards (KATS), drop weight test car
工业和信息化部, drop weight test car
- HG/T 3213-2018 Test method for drop weight impact strength of plastic tower packing
- QC/T 1142-2021 Test method for natural frequency of automobile wheels
- QC/T 1143-2021 Test method for static bending stiffness of automobile wheels
- QC/T 237-2022 Automobile parking brake performance bench test method
Professional Standard - Chemical Industry, drop weight test car
Professional Standard - Aerospace, drop weight test car
- QJ 3039-1998 Test method for drop weight impact sensitivity of composite solid propellants
SAE - SAE International, drop weight test car
- SAE J996-1980 INVERTED VEHICLE DROP TEST PROCEDURE
- SAE J1153-1976 Hydraulic Master Cylinders for Motor Vehicle Brakes - Test Procedure
- SAE J360-1995 Truck and Bus Grade Parking Performance Test Procedure
- SAE J360-1988 Truck and Bus Grade Parking Performance Test Procedure
- SAE J360-1968 VEHICLE GRADE PARKING PERFORMANCE TEST CODE
- SAE J938-1992 DROP TEST FOR EVALUATING LAMINATED SAFETY GLASS FO...
- SAE J938-1984 DROP TEST FOR EVALUATING LAMINATED SAFETY GLASS FOR USE IN AUTOMOTIVE WINDSHIELDS
- SAE J938-1965 DROP TEST FOR EVALUATING LAMINATED SAFETY GLASS FOR USE IN AUTOMOTIVE WINDSHIELDS
- SAE J45-2018 Brake System Test Procedure - Snowmobiles
- SAE J45-2003 Brake System Test Procedure-Snowmobiles
- SAE J45-1973 Brake System Test Procedure - Snowmobiles
- SAE J45-2016 Brake System Test Procedure - Snowmobiles
- SAE J45-1984 BRAKE SYSTEM TEST PROCEDURE-SNOWMOBILES
Society of Automotive Engineers (SAE), drop weight test car
Japanese Industrial Standards Committee (JISC), drop weight test car
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, drop weight test car
- GJB 5403.2-2005 Test method of launch safety of explosive charge Part 2: Drop hammer impact test
- GJB 5383.2-2005 Test methods of sensitivity and stability for pyrotechnic Part 2: Test for impact sensitivity falling weight method
- GJB 5383.3-2005 Test methods of sensitivity and stability for pyrotechnic. Part 3: Test for friction sensitivity. Single falling angle swing hammer method
- GJB 5383.4-2005 Test methods of sensitivity and stability for pyrotechnic. Part 4: Test for friction sensitivity. Combine falling angle swing hammer method
American National Standards Institute （ANSI), drop weight test car
- ANSI/ASTM E208:1995 Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
- ANSI/ASTM D2444:1999 Test Method For Determination Of The Impact Resistance Of Thermoplastic Pipe And Fittings By Means Of A Tup Falling Weight
- ANSI/ASTM D4495:2012 Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
- ANSI/SAE J240-1993 Automotive Storage Batteries, Life Test for
ES-UNE, drop weight test car
- UNE 41250-3:2016 Test methods for measurement of pavement deflection. Part 3: Falling weight deflectometer
RU-GOST R, drop weight test car
- GOST 33496-2015 Polymer composites. Method for testing the resistance to damage during a falling weight impact
- GOST 18507-1973 Buses and cars. Control test methods after capital repair
- GOST 10373-1975 Motor gasolines for car engines. Methods of knock jests
- GOST R 56337-2015 Automobile roads of general use. Geosynthetics. Test procedure for determination of durability at the dynamic forcing through (cone drop test)
- GOST R 58009-2017 Leather. Leather for automotive. Test methods and testing parameters
International Electrotechnical Commission (IEC), drop weight test car
- IEC PAS 62050:2004 Board level drop test method of components for handheld electronic products
- IEC 60749-37:2008 Semiconductor devices - Mechanical and climatic test methods - Part 37: Board level drop test method using an accelerometer
SE-SIS, drop weight test car
The American Road & Transportation Builders Association, drop weight test car
- AASHTO T 99-2001 Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
- AASHTO T 180-2001 Standard Method of Test for Moisture-Density Relations of Soils Using a 4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
KR-KS, drop weight test car
WRC - Welding Research Council, drop weight test car
- BULLETIN 469-2002 CRACK-STARTER WELD BEAD DEPOSITION FOR ASTM E-208 DROP-WEIGHT TESTING: PART I) QUALIFICATION OF ELECTRODES FOR THE CRACK-STARTER BASED ON P-2 TYPE DROP-WIGHT SPECIMEN -ASTM E-208-95A; PART II) DETER
VN-TCVN, drop weight test car
- TCVN 2100-1-2007 Paints and varnishes.Rapid-deformation(impact resistance)tests.Part1:Falling-weight test,large-area indenter
- TCVN 2100-2-2007 Paints and varnishes.Rapid-deformation(impact resistance)tests.Part2:Falling-weight test,small-area indenter
Professional Standard - Automobile, drop weight test car
国家市场监督管理总局、中国国家标准化管理委员会, drop weight test car
(U.S.) Ford Automotive Standards, drop weight test car
CEN - European Committee for Standardization, drop weight test car
- EN ISO 6272-1:2004 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test@ large-area indenter
- EN ISO 6272-2:2006 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test@ small-area indenter
European Committee for Standardization (CEN), drop weight test car
- EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
- EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
- EN 16734:2016 Automotive fuels - Automotive B10 fuel - Requirements and test methods
- EN 228:2012 Automotive fuels - Unleaded petrol - Requirements and test methods
- prEN 228-1992 Automotive fuels; unleaded petrol; requirements and methods of test
- EN 14906:2012 Leather - Leather for automotive - Test methods and testing parameters
Professional Standard - Aviation, drop weight test car
- HBm 65.3-1987 Rules for factory test of miniature automobile gasoline engine
- HB 8619-2021 Test method for drop weight impact damage resistance of aerospace polymer matrix composite laminates
Malaysia Standards, drop weight test car
- MS 133 Pt.E3-2000 Methods of test for paints and varnishes:Part E3:Resistance to impact(Falling-weight test)(First revision)(ISO 6272:1993,MOD)
ZA-SANS, drop weight test car
- SANS 3894:2007 Road vehicles - Wheels/rims for commercial vehicles - Test methods
AT-ON, drop weight test car
JSAE - Society of Automotive Engineers of Japan@ Inc., drop weight test car
Professional Standard - Traffic, drop weight test car
- JT/T 426-2000 Combination of vehicle performance requirements and test method
Professional Standard - Forestry, drop weight test car
Military Standard of the People's Republic of China-General Armament Department, drop weight test car
工业和信息化部/国家能源局, drop weight test car
BE-NBN, drop weight test car
- NBN-EN 228-1995 Automotive fuels - Unleaded petrol - Requirements and methods of test
National Metrological Verification Regulations of the People's Republic of China, drop weight test car
- JJG(轻工) 25-1989 Verification rules for bicycle frame front fork assembly drop weight testing machine
Group Standards of the People's Republic of China, drop weight test car
Xinjiang Provincial Standard of the People's Republic of China, drop weight test car
TH-TISI, drop weight test car
GM Daewoo, drop weight test car
Professional Standard - Geology, drop weight test car
- DZ/T 0019-1991 Test method for automobile-mounted geological drilling rig
Professional Standard - Aviation Industry, drop weight test car
Professional Standard - Speciality, drop weight test car
Professional Standard - Electron, drop weight test car
- SJ/T 10325-1992 Environmental testing requirements and methods for car radio and playback
Professional Standard - Energy, drop weight test car
Underwriters Laboratories (UL), drop weight test car
- UL 1296-1992 Shear resistance tests for ceiling boards for manufactured homes
DE-VDA, drop weight test car