ZH
RU
ES

volume fraction volume concentration

volume fraction volume concentration, Total:331 items.

In the international standard classification, volume fraction volume concentration involves: Paint ingredients, Measurement of fluid flow, Agricultural machines, implements and equipment, Air quality, Conducting materials, Soil quality. Pedology, Paper and board, Buildings, Products of the chemical industry, Fuels, Cases. Boxes. Crates, Beverages, Water quality, Wastes, Food products in general, Prepackaged and prepared foods, Testing of metals, Products of non-ferrous metals, Cutting tools, Paper products, Nuclear energy engineering, Particle size analysis. Sieving, Ferrous metals, Construction materials, Vocabularies, Fluid storage devices, Paints and varnishes, Ceramics, Fruits. Vegetables, Reinforced plastics, Electrical accessories, Refractories, Electrical equipment for working in special conditions, Equipment for petroleum and natural gas industries, Powder metallurgy, Earthworks. Excavations. Foundation construction. Underground works, Plastics, Cellular materials, Metrology and measurement in general, Microbiology, Coals, Linear and angular measurements, Integrated circuits. Microelectronics, Road engineering, Alarm and warning systems, Geology. Meteorology. Hydrology, Welding, brazing and soldering, Fluid power systems, Mining and quarrying.

ZA-SANS, volume fraction volume concentration

SANS 5560:2005 Pigment volume concentration of paints with a non-aqueous solvent base

AENOR, volume fraction volume concentration

UNE 28012-3:1954 WOODS USED IN AIRCRAFT. VOLUMETRIC CONCENTRATION TEST.
UNE-EN 14789:2017 Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism
UNE-EN 14702-1:2007 Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
UNE-EN ISO 12625-3:2015 Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk (ISO 12625-3:2014)
UNE-EN ISO 15970:2014 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008)
UNE-EN 1094-4:1996 Insulating refractory products - Part 4: Determination of bulk density and true porosity
UNE-EN 23923-2:1998 METALLIC POWDERS. DETERMINATION OF APPARENT DENSITY. PART 2: SCOTT VOLUMETER METHOD. (ISO 3923-2:1981).
UNE-EN 1015-10:2000 METHODS OF TEST FOR MORTAR FOR MASONRY - PART 10: DETERMINATION OF DRY BULK DENSITY OF HARDENED MORTAR.
UNE-ISO 16586:2006 Soil quality -- Determination of soil water content as a volume fraction on the basis of known dry bulk density -- Gravimetric method (ISO 16586:2003)

CZ-CSN, volume fraction volume concentration

CSN ISO 8840:1992 Rfractory materials. Determination of bulk density of granular materials (grain density)

International Organization for Standardization (ISO), volume fraction volume concentration

ISO/CD 6640 Determination of concentration or density of Suspended and deposited sediment in water bodies by Radiometric Methods
ISO 16586:2003 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
ISO 16236:2013 Crop protection equipment - Test method for the determination of drainable volume and its concentration
ISO 9042:1988 Steels; manual point counting method for statistically estimating the volume fraction of a constituent with a point grid
ISO/DIS 9042:2023 Steels — Point counting method for statistically estimating the volume fraction of a constituent with a point grid
ISO 12625-3:2014 Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk
ISO 20290-1:2021 Aggregates for concrete - Test methods for mechanical and physical properties - Part 1: Determination of bulk density, particle density, particle mass-per-volume and water absorption
ISO 13317-4:2014 Determination of particle size distribution by gravitational liquid sedimentation methods - Part 4: Balance method
ISO 1088:1973 Liquid flow measurement in open channels — Velocity-area methods — Collection of data for determination of errors in measurement
ISO 3065:2011 Oil of eucalyptus Australian type, containing a volume fraction of 80 % to 85 % of 1,8-cineole
ISO 13317-2:2001 Determination of particle size distribution by gravitational liquid sedimentation methods - Part 2: Fixed pipette method
ISO/CD 9042 Steels — Manual point counting method for statistically estimating the volume fraction of a constituent with a point grid
ISO 13317-3:2001 Determination of particle size distribution by gravitational liquid sedimentation methods - Part 3: X-ray gravitational technique
ISO 13318-3:2004 Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 3: Centrifugal X-ray method
ISO 13318-1:2001 Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 1: General principles and guidelines
ISO 13317-1:2001 Determination of particle size distribution by gravitational liquid sedimentation methods - Part 1: General principles and guidelines
ISO 21687:2007 Carbonaceous materials used in the production of aluminium - Determination of density by gas pyknometry (volumetric) using helium as the analysis gas - Solid materials
ISO 10705-3:2003 Water quality - Detection and enumeration of bacteriophages - Part 3: Validation of methods for concentration of bacteriophages from water
ISO/IEC 23090-10:2022 Information technology — Coded representation of immersive media — Part 10: Carriage of visual volumetric video-based coding data
ISO 16586:2003/Cor 1:2009 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method; Technical Corrigendum 1
ISO/IEC 23090-10:2022/Amd 1:2022 Information technology — Coded representation of immersive media — Part 10: Carriage of visual volumetric video-based coding data — Amendment 1: Support of packed video data
ISO 9278:2008 Nuclear energy - Uranium dioxide pellets - Determination of density and volume fraction of open and closed porosity
ISO 1088:2007 Hydrometry - Velocity-area methods using current-meters - Collection and processing of data for determination of uncertainties in flow measurement

Canadian General Standards Board （CGSB), volume fraction volume concentration

CGSB 1-GP-71 METH 21.2-1981 Methods of Testing Paints and Pigments Pigment Content Pigment Volume Concentration (PVC)

国家市场监督管理总局、中国国家标准化管理委员会, volume fraction volume concentration

GB/T 40345-2021 Crop protection equipment—Test method for the determination of drainable volume and its concentration

German Institute for Standardization, volume fraction volume concentration

DIN EN 14789:2006 Stationary source emissions - Determination of volume concentration of oxygen (O<(Index)2>) - Reference method - Paramagnetism; English version of DIN EN 14789:2006-04
DIN ISO 16586:2012 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method (ISO 16586:2003 + Cor. 1:2009)
DIN EN 16966:2019-01 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration; German version EN 16966:2018
DIN EN 16966:2019 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration
DIN 277-3:2005 Areas and volumes of building - Part 3: Quantities and reference units
DIN 1871:1999 Gaseous fuels and other gases - Density and other volumetric quantities
DIN EN 14789:2017-05 Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism; German version EN 14789:2017
DIN CEN/TS 17405:2020-11 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry; German version CEN/TS 17405:2020
DIN EN ISO 8655-8:2020 Piston-operated volumetric apparatus - Part 8: Photometric reference measurement procedure for the determination of volume (ISO/DIS 8655-8:2020); German and English version prEN ISO 8655-8:2020
DIN 12803-2:2019-12 Laboratory glassware - Alcoholometry - Part 2: Alcoholometers for the alcoholic strength by volume
DIN EN ISO 15970:2014-09 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008); German version EN ISO 15970:2014
DIN EN 14789:2017 Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism; German version EN 14789:2017
DIN 19683-13:2007-07 Soil quality - Physical laboratory tests - Part 13: Determination of soil volume percentage, total pore volume and pore number of mineral soils
DIN EN 14702-1:2006 Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index) English version of DIN EN 14702-1:2006-06
DIN EN 14702-1:2006-06 Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index); German version EN 14702-1:2006
DIN EN ISO 12625-3:2014 Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness, apparent bulk density and bulk (ISO 12625-3:2014); German version EN ISO 12625-3:2014
DIN 58933-1:1995-01 Haematology - Procedure for determining the volume fraction of erythrocytes (packed cell volume) in blood - Part 1: Reference method based on centrifugation
DIN CEN/TS 17405:2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry; German version CEN/TS 17405:2020
DIN 52170-1:1980 Determination of composition of hardened concrete; general, terms, sampling, dry-bulk density
DIN 53165:2019-01 Testing of pigments and extenders - Determination of the relative scattering power of white pigments for different pigment volume concentrations (PVC) - Grey paste method
DIN EN ISO 8655-8:2022-11 Piston-operated volumetric apparatus - Part 8: Photometric reference measurement procedure for the determination of volume (ISO 8655-8:2022); German version EN ISO 8655-8:2022
DIN EN ISO 11461:2014-07 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method (ISO 11461:2001); German version EN ISO 11461:2014
DIN 66136-2:2007 Determination of the degree of dispersion of metals using chemisorption - Part 2: Volumetric method
DIN 53171:2009-08 Solvents for paints and varnishes - Determination of distillation characteristics (boiling range and boiling temperature as a function of distilled volume)
DIN EN 772-4:1998 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units; German version EN 772-4:1998
DIN EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids; German version EN 1097-3:1998
DIN 54408:2007-10 Testing of ion exchangers - Determination of bulk weight density, equilibrium moisture content and solids
DIN ISO 16586:2012-05 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method (ISO 16586:2003 + Cor. 1:2009)
DIN 53171:2009 Solvents for paints and varnishes - Determination of distillation characteristics (boiling range and boiling temperature as a function of distilled volume)
DIN ISO 91:2019-12 Petroleum and related products - Temperature and pressure volume correction factors (petroleum measurement tables) and standard reference conditions (ISO 91:2017)
DIN EN ISO 10545-3:2018 Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density (ISO 10545-3:2018)
DIN EN 12697-6:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens; German version EN 12697-6:2003+A1:2007
DIN EN 772-4:1998-10 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units; German version EN 772-4:1998
DIN EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum; German version EN 993-18:2002
DIN EN ISO 1133-2:2012-03 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011); German version EN ISO 1133-2:2011
DIN EN ISO 16834:2007 Welding consumables - Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels - Classification (ISO 16834:2006)English version of DIN EN ISO 16834:2007-05
DIN 54385:2016 Solid recovered fuels - Collection of representative analytical samples from heterogeneous materials of low bulk density using the pressing-drill method
DIN EN 1015-6:2007 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar (includes Amendment A1:2006) English version of DIN EN 1015-6:2007-05
DIN 54385:2016-08 Solid recovered fuels - Collection of representative analytical samples from heterogeneous materials of low bulk density using the pressing-drill method

International Electrotechnical Commission (IEC), volume fraction volume concentration

IEC 61788-5:2000 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement; Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors

Korean Agency for Technology and Standards (KATS), volume fraction volume concentration

KS I ISO 16586:2009 Soil quality-Determination of soil water content as a volume fraction on the basis of known dry bulk density-Gravimetric method
KS M ISO 12625-3:2022 Tissue paper and tissue products — Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk
KS B ISO 4365:2022 Liquid flow in open channels — Sediment in streams and canals — Determination of concentration, particle size distribution and relative density
KS I ISO 15970-2010(2021) Natural gas－Measurement of properties－Volumetric properties: density, pressure, temperature and compression factor
KS A ISO 9278-2014(2019) Nuclear energy — Uranium dioxide pellets — Determination of density and volume fraction of open and closed porosity
KS D ISO 9042-2002(2012) Steels－Manual point counting method for statistically estimating the volume fraction of a constituent with a point grid
KS A 0082-2008(2018) Low volume air samplers and methods for measuring mass concentration of airborne dust by the low volume air samplers
KS D ISO 9042:2002 Steels-Manual point counting method for statistically estimating the volume fraction of a constituent with a point grid
KS H ISO 3065-2013(2018) Oil of eucalyptus Australian type, containing a volume fraction of 80 % to 85 % of 1,8-cineole
KS D ISO 9042:2013 Steels－Manual point counting method for statistically estimating the volume fraction of a constituent with a point grid
KS M ISO 787-11:2007 General methods of test for pigments and extenders－Part 11：Determination of tamped volume and apparent density after tamping
KS M ISO 21687:2011 Carbonaceous materials used in the production of aluminium-Determination of density by gas pyknometry (volumetric) using helium as the analysis gas-Solid materials
KS M ISO 21687:2016 Carbonaceous materials used in the production of aluminium－Determination of density by gas pyknometry (volumetric) using helium as the analysis gas－Solid materials
KS I ISO 10705-3:2015 Water quality — Detection and enumeration of bacteriophages — Part 3: Validation of methods for concentration of bacteriophages from water
KS I ISO 10705-3:2010 Water quality-Detection and enumeration of bacteriophages-Part 3:Validation of methods for concentration of bacteriophages from water
KS I ISO 10705-3:2021 Water quality — Detection and enumeration of bacteriophages —Part 3: Validation of methods for concentration of bacteriophages from water
KS C IEC 61779-5-2003(2018)
KS I ISO 11461:2021 Soil quality — Determination of soil water content as a volume fraction using coring sleeves — Gravimetric method
KS B ISO 1088:2021 Hydrometry — Velocity-area methods using current-meters —Collection and processing of data for determination of uncertainties in flow measurement
KS B ISO 1088:2015 Liquid flow measurement in open channels－Velocity-area methods－Collection and processing of data for determination of errors in measurement
KS M ISO 3233-2002(2012) Paints and varnishes－Determination of percentage volume of non-volatile matter by measuring the density of a dried coating
KS M ISO 21687-2016(2021) Carbonaceous materials used in the production of aluminium－Determination of density by gas pyknometry (volumetric) using helium as the analysis gas－Solid materials
KS B ISO 16834:2021 Welding consumables — Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels —Classification
KS B ISO 16834:2015 Welding consumables-Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels-Classification
KS M 1133-2-2016 Plastics － Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics － Part 2: Method for materials sensitive to time-temperature history and/or moisture
KS M ISO 1133-2:2016 Plastics － Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics － Part 2: Method for materials sensitive to time-temperature history and/or moisture
KS B ISO 1088:2005 Liquid flow measurement in open channels-Velocity-area methods-Collection and processing of data for determination of errors in measurement
KS A ISO 9278:2012 Nuclear energy-Uranium dioxide pellets-Determination of density and volume fraction of open and closed porosity
KS A ISO 9278:2014 Nuclear energy — Uranium dioxide pellets — Determination of density and volume fraction of open and closed porosity
KS M ISO 787-11-2007(2017) General methods of test for pigments and extenders－Part 11：Determination of tamped volume and apparent density after tamping
KS B ISO 16834:2006 Welding consumables-Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels-Classification
KS L 1618-2-2008 Fine ceramics(advanced ceramics, advanced technical ceramics)-Test methods of properties of ceramic granules-Part 2:Bulk density
KS M ISO 787-11:2022 General methods of test for pigments and extenders — Part 11: Determination of tamped volume and apparent density after tamping
KS C IEC 61779-2-2003(2018)
KS C IEC 61779-3-2003(2018)
KS C IEC 61779-4-2003(2018)

Association Francaise de Normalisation, volume fraction volume concentration

NF X43-370:2006 Stationary source emissions - Determination of volume concentration of oxygen (O2) - Reference method - Paramagnetism.
NF X43-602*NF EN 16966:2018 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration
NF EN ISO 1183-2:2019 Plastiques - Méthodes de détermination de la masse volumique des plastiques non alvéolaires - Partie 2 : méthode de la colonne à gradient de masse volumique
NF U26-033*NF ISO 16236:2013 Crop protection equipment - Test method for the determination of drainable volume and its concentration
NF X43-370*NF EN 14789:2017 Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method : Paramagnetism
NF EN 14789:2017 Émissions de sources fixes - Détermination de la concentration volumique en oxygène - Méthode de référence normalisée : paramagnétisme
XP CEN/TS 17405:2020 Emissions de sources fixes - Détermination de la concentration volumique en dioxyde de carbone - Méthode de référence : spectrométrie infrarouge
NF EN ISO 15970:2014 Gaz naturel - Mesurage des caractéristiques - Caractéristiques volumétriques : masse volumique, pression, température et facteur de compression
NF ISO 9278:2009 Énergie nucléaire - Pastilles de dioxyde d'uranium - Détermination de la masse volumique et de la fraction volumique de pores ouverts et fermés
NF X33-027-1*NF EN 14702-1:2006 Characterization of sludges - Settling properties - Part 1 : determination of settleability (Determination of the proportion of sludge volume and sludge volume index).
NF ISO 13168:2015 Qualité de l'eau - Détermination simultanée des activités volumiques du tritium et du carbone 14 - Méthode par comptage des scintillations en milieu liquide
NF Q34-030-3*NF EN ISO 12625-3:2014 Tissue paper and tissue products - Part 3 : determination of thickness, bulking thickness and apparent bulk density and bulk
NF A05-165:1987 Steel products - Manual point counting method for statistically estimating the volume fraction of a constituent with a point grid
NF T75-367:2012 Oil of eucalyptus, Australian type, containing a volume fraction of 80% to 85% of 1,8-cineole.
NF X11-601:1979 Sieving and granulometry. Determination of the area per unit of mass or volume of powders by permeametry. Lea and nurse method.
NF X11-684:1985 Size analysis - Particle size analysis by cumulative sedimentation in a static liquid - Sedimentation balance method
NF X10-309:1986 Liquid flow measurement in open channels. Velocity area methods. Collecting and processing of data for determination of errors measurement.
NF EN ISO 11461:2014 Qualité du sol - Détermination de la teneur en eau du sol en fraction volumique, à l'aide de carottiers - Méthode gravimétrique
NF X31-433*NF ISO 16586:2003 Sol quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
NF X11-683:1981
NF P94-061-2:1996 Sols : reconnaissance et essais - Détermination de la masse volumique d'un matériau en place - Partie 2 : méthode au densitomètre à membrane.
NF P61-531-3*NF EN ISO 10545-3:2018 Ceramic tiles - Part 3 : determination of water absorption, apparent porosity, apparent relative density and bulk density
NF EN ISO 8655-8:2022 Appareils volumétriques à piston - Partie 8 : mode opératoire de mesure photométrique de référence pour la détermination de volumes
NF EN ISO 1133-1:2022 Plastiques - Détermination de l'indice de fluidité à chaud des thermoplastiques, en masse (MFR) et en volume (MVR) - Partie 1 : méthode normale
NF EN ISO 1133-2:2012 Plastiques - Détermination de l'indice de fluidité à chaud des thermoplastiques, en masse (MFR) et en volume (MVR) - Partie 2 : méthode pour les matériaux sensibles à l'historique temps-température et/ou à l'humidité
NF M08-011*NF ISO 91:2017 Petroleum and related products - Temperature and pressure volume correction factors (petroleum measurement tables) and standard reference conditions
NF ISO 91:2017 Pétrole et produits connexes - Facteurs de correction de volume par rapport à la température et à la pression (tables de mesure du pétrole) et conditions de référence standard
NF T30-093:2009 Paints and varmishes - Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate.
NF P94-512-2*NF EN ISO 17892-2:2014 Geotechnical investigation and testing - Laboratory testing of soil - Part 2 : determination of bulk density
NF EN ISO 13383-2:2016 Céramiques techniques - Caractérisation microstructurale - Partie 2 : détermination de la fraction volumique des phases par évaluation des micrographies
NF M60-823-3:2022 Nuclear energy - Radioactivity measurement in gaseous effluents - Determination of noble gas activity in gaseous effluents and gas discharge - Part 3 : real time monitoring used for the volumetric activity of noble gas
NF P98-818-7*NF EN 12697-7:2022 Bituminous mixtures - Test methods - Part 7 : determination of the bulk density of bituminous specimens by gamma rays
NF S95-157-1*NF EN ISO 9360-1:2009 Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1 : HMEs for use with minimum tidal volumes of 250 ml
NF EN 14702-1:2006 Caractérisation des boues - Propriétés de sédimentation - Partie 1 : détermination de l'aptitude à la sédimentation (Détermination du volume de boues et de l'indice de boues)
NF EN ISO 787-11:1995 Méthodes générales d'essai des pigments et matières de charge - Partie 11 : détermination du volume massique apparent et de la masse volumique apparente après tassement.

KR-KS, volume fraction volume concentration

KS M ISO 12625-3-2022 Tissue paper and tissue products — Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk
KS B ISO 4365-2022 Liquid flow in open channels — Sediment in streams and canals — Determination of concentration, particle size distribution and relative density
KS B ISO 1088-2015 Liquid flow measurement in open channels－Velocity-area methods－Collection and processing of data for determination of errors in measurement
KS C IEC 61779-5-2003(2023)
KS M ISO 21687-2016 Carbonaceous materials used in the production of aluminium－Determination of density by gas pyknometry (volumetric) using helium as the analysis gas－Solid materials
KS I ISO 10705-3-2015 Water quality — Detection and enumeration of bacteriophages — Part 3: Validation of methods for concentration of bacteriophages from water
KS I ISO 10705-3-2021 Water quality — Detection and enumeration of bacteriophages —Part 3: Validation of methods for concentration of bacteriophages from water
KS C IEC 61779-3-2003(2023)
KS I ISO 11461-2021 Soil quality — Determination of soil water content as a volume fraction using coring sleeves — Gravimetric method
KS C IEC 61779-4-2003(2023)
KS B ISO 1088-2021 Hydrometry — Velocity-area methods using current-meters —Collection and processing of data for determination of uncertainties in flow measurement
KS C IEC 61779-2-2003(2023)
KS B ISO 16834-2021 Welding consumables — Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels —Classification
KS M ISO 787-11-2022 General methods of test for pigments and extenders — Part 11: Determination of tamped volume and apparent density after tamping

Danish Standards Foundation, volume fraction volume concentration

DS/ISO 16586/Corr. 1:2009 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
DS/ISO 16586:2003 Soil quality - Determination of soil water content as a volume fraction on the basis of known dry bulk density - Gravimetric method
DS/EN 14789:2005 Stationary source emissions - Determination of volume concentration of oxygen (O2) - Reference method - Paramagnetism
DS/ISO 16236:2013 Crop protection equipment - Test method for the determination of drainable volume and its concentration
DS/EN 14702-1:2006 Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
DS/EN 764-1:2004 Pressure equipment - Terminology - Part 1: Pressure, temperature, volume, nominal size
DS/EN 1094-4:1996 Insulating refractory products - Part 4: Determination of bulk density and true porosity
DS/EN ISO 10545-3:1998 Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density
DS/ISO 11461:2003 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method
DS/EN 623-5:2009 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 5: Determination of phase volume fraction by evaluation of micrographs
DS/EN ISO 1133-2:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture
DS/EN 772-4:1999 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units
DS/EN ISO 787-11:1995 General methods of test for pigments and extenders - Part 11: Determination of tamped volume and apparent density after tamping

ES-UNE, volume fraction volume concentration

UNE-EN 16966:2022 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration
UNE-EN ISO 8655-8:2022 Piston-operated volumetric apparatus - Part 8: Photometric reference measurement procedure for the determination of volume (ISO 8655-8:2022) (Endorsed by Asociación Española de Normalización in July of 2022.)
UNE-EN ISO 11461:2014 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method (ISO 11461:2001) (Endorsed by AENOR in May of 2014.)
UNE-EN 772-4:1999 METHODS OF TEST FOR MASONRY UNITS - PART 4: DETERMINATION OF REAL AND BULK DENSITY AND OF TOTAL AND OPEN POROSITY FOR NATURAL STONE MASONRY UNITS
UNE-EN ISO 1133-2:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011)

American Society for Testing and Materials (ASTM), volume fraction volume concentration

ASTM UOP563-90 Packed Apparent Bulk Density of Molecular Sieves
ASTM D6881/D6881M-03(2008)e1 Standard Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density
ASTM E1109-18 Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
ASTM E1109-19 Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
ASTM D6881/D6881M-03(2013) Standard Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density
ASTM E562-11 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
ASTM D3101-78 Practice for Determination of Bulk Density and Packing Factor of Hollow Glass Microspheres
ASTM E562-01 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
ASTM E562-05e1 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
ASTM E562-19 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
ASTM E562-99 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
ASTM E562-19e1 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count
ASTM D7708-14 Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite Dispersed in Sedimentary Rocks
ASTM D6683-14 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
ASTM D6683-19 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress

CEN - European Committee for Standardization, volume fraction volume concentration

EN 16966:2018 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration@ surface area concentration and mass concentration
EN 12697-6:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens (Incorporates Amendment A1: 2007)

Lithuanian Standards Office , volume fraction volume concentration

LST EN 14789-2006 Stationary source emissions - Determination of volume concentration of oxygen (O2) - Reference method - Paramagnetism
LST CEN/TS 17405-2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry
LST EN 14702-1-2006 Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
LST EN 764-1-2004 Pressure equipment - Part 1: Terminology - Pressure, temperature, volume, nominal size
LST EN 1094-4-2001 Insulating refractory products - Part 4: Determination of bulk density and true porosity
LST EN 23923-2-2000 Metallic powders - Determination of apparent density - Part 2: Scott volumeter method (ISO 3923-2:1981)
LST EN 623-5-2009 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 5: Determination of phase volume fraction by evaluation of micrographs
LST EN 772-4-2000 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units
LST EN ISO 1133-2:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011)

British Standards Institution (BSI), volume fraction volume concentration

BS EN 16966:2018 Workplace exposure. Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates. Metrics to be used such as number concentration, surface area concentration and mass concentration
BS ISO 16236:2013 Crop protection equipment. Test method for the determination of drainable volume and its concentration
BS EN ISO 15970:2014 Natural gas. Measurement of properties. Volumetric properties: density, pressure, temperature and compression factor
BS EN 14702-1:2006 Characterization of Sludges. Settling Properties. Part 1: Determination of Settleability (Determination of the Proportion of Sludge Volume and Sludge Volume Index)
BS EN 14702-1:2007 Characterization of sludges - Settling properties - Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
BS EN 14789:2017 Tracked Changes. Stationary source emissions. Determination of volume concentration of oxygen. Standard reference method: Paramagnetism
BS ISO 13317-4:2014 Determination of particle size distribution by gravitational liquid sedimentation methods. Balance method
BS ISO 3065:2012 Oil of eucalyptus Australian type, containing a volume fraction of 80 % to 85 % of 1,8-cineole
BS EN 12625-3:1999 Tissue Paper and Tissue Products - Part 3: Determination of Thickness, Bulking Thickness and Apparent Bulk Density
BS 7590:1992 Method for statistically estimating the volume fraction of phases and constituents by systematic manual point counting with a grid
BS 3406-6:1985 Methods for determination of particle size distribution - Recommendations for centrifugal liquid sedimentation methods for powders and suspensions
BS ISO 21687:2007 Carbonaceous materials used in the production of aluminium - Determination of density by gas pyknometry (volumetric) using helium as the analysis gas - Solid materials
BS 6169-2:1984 Methods for volumetric measurement of liquid hydrocarbons - Turbine meter systems
BS 2782-6 Method 621C:1983 Methods of testing plastics - Dimensional properties - Determination of the bulk factor of moulding materials
BS DD ENV 623-5:2002 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Determination of phase volume fraction by evaluation of micrographs
19/30373025 DC BS ISO 20290-1. Aggregates for concrete. Test methods for mechanical and physical properties. Part 1. Determination of bulk density, particle density, particle mass-per-volume and water absorption
BS EN ISO 11461:2014 Soil quality. Determination of soil water content as a volume fraction using coring sleeves. Gravimetric method
DD ENV 623-5-2002 Advanced technical ceramics. Monolithic ceramics. General and textural properties. Determination of phase volume fraction by evaluation of micrographs
BS EN 1094-4:1995 Insulating refractory products - Determination of bulk density and true porosity
BS ISO 1088:2007 Hydrometry. Velocity-area methods using current-meters. Collection and processing of data for determination of uncertainties in flow measurement
BS 4618 Sec.2.3:1975 Recommendations for the presentation of plastics design data. Electrical properties. Volume resistivity
20/30400030 DC BS ISO/IEC 23090-10. Information technology. Coded representation of immersive media. Part 10. Carriage of visual volumetric video-based coding data
20/30375703 DC BS EN ISO 8655-8. Piston-operated volumetric apparatus. Part 8. Photometric reference measurement procedure for the determination of volume
21/30435777 DC BS ISO/IEC 23090-10 AMD1. Information technology. Coded representation of immersive media. Part 10. Carriage of visual volumetric video-based coding data
BS EN ISO 16834:2007 Welding consumables. Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels. Classification

European Committee for Standardization (CEN), volume fraction volume concentration

EN 14789:2005 Stationary source emissions - Determination of volume concentration of oxygen (O2) - Reference method - Paramagnetism
EN 14789:2017 Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism
CEN/TS 17405:2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry
EN 14702-1:2006 Characterization of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
EN ISO 4590:1995 Cellular Plastics - Determination of Volume Percentage of Open and Close Cells of Rigid Materials (ISO 4590:1981)
EN 12625-3:1999 Tissue Paper and Tissue Products - Part 3: Determination of Thickness, Bulking Thickness and Apparent Bulk Density
EN ISO 4590:2003 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells ISO 4590: 2002
prEN 725-8-1993 Advanced technical ceramics; methods of test for ceramic powders; part 8: determination of tapped bulk density
EN 12697-6:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens
EN 12697-6:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens
prEN 725-9-1993 Advanced technical ceramics; methods of test for ceramic powders; part 9: determination of untapped bulk density
EN 725-8:2006 Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 8: Determination of Tapped Bulk Density
EN 725-8:1997 Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 8: Determination of Tapped Bulk Density
EN 725-9:2006 Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of un-tapped bulk density
EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
EN 725-9:1997 Advanced Technical Ceramics - Methods of Test for Ceramic Powders - Part 9: Determination of Untamped Bulk Density

RU-GOST R, volume fraction volume concentration

GOST R 51822-2001 Wines and wine materials. Gas-chromatographic method for determination of volume fraction of ethanol and mass concentration of acetic and propionic acids
GOST 15113.1-1977 Food concentrates. Methods for determination of packing quality, net and volume weight, separate components mass fraction, particle size of certain types of product and milling grade
GOST 33833-2016 Spirits. Gas-chromatographic method for determination of volume fraction of methanol
GOST R ISO 9042-2011 Steels. Manual point counting method for statistically estimating the volume fraction of a constituent with point grid
GOST 8756.10-2015 Fruit and vegetable products. Methods for determination of volume and mass fraction of the pulp
GOST R 57858-2017 Polymer composites. Method for determination of fiber volume fraction and fiber distribution in polymer matrix
GOST R ISO 21687-2014 Carbonaceous materials for the production of aluminium. Determination of density by gas pyknometry (volumetric) using helium as the analysis gas. Solid materials
GOST R 53764-2009 Soil quality. Determination of soil water content as a volume fraction using coring sleeves. Gravimetric method
GOST R 8.599-2003 State system for ensuring the uniformity of measurements. Density and volume of oil. The tables of factots for recalculation of density and mass
GOST R 52140-2003 Electrical apparatus for the detection and measurement of flammable gases. Part 5. Performance requirements for group II apparatus indicating a volume fraction up to 100 % gas
GOST R 8.845-2013 State system for ensuring the uniformity of measurements. Air ion composition measurements. Method of measuring volume density of electric charge of air and air ion concentration using aspiration capacitor
GOST R 52137-2003 Electrical apparatus for the detection and measurement of flammable gases. Part 2. Performance requirements for group I apparatus indicating a volume fraction up to 5 % methane in air
GOST R 52139-2003 Electrical apparatus for the detection and measurement of flammable gases. Part 4. Performance requirements for group I1 apparatus indicating a volume fraction up to 100 % lower explosive limit
GOST R 52138-2003 Electrical apparatus for the detection and measurement of flammable gases. Part 3. Performance requirements for group I apparatus indicating a volume fraction up to 100 % methane in air
GOST 8756.1-2017 Fruit, vegetable and mushroom products. Methods for determination of organoleptic characteristics, components fraction of total mass and net mass or volume

AT-ON, volume fraction volume concentration

ONORM M 6273-2000 Water analysis-Analysis of activated sludge-Determination of the settled share of sludge volume,the dry residue and the sludge volume index
ONR CEN/TS 17405-2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry (CEN/TS 17405:2020)

API - American Petroleum Institute, volume fraction volume concentration

API MPMS 11.1 VOL VI-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume VI Table 24C - Volume Correction Factors for Individual and Special Applications Volume Correction to 60 Degrees F Against Thermal Expansion Coefficients at 60 Degre
API MPMS 11.1 VOL III-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume III Table 6C - Volume Correction Factors for Individual and Special Applications Volume Correction to 60 Degrees F Against Thermal Expansion Coefficients at 60 Degre
API MPMS 11.1 VOL IX-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume IX Table 54C - Volume Correction Factors for Individual and Special Applications Volume Correction to 15 Degrees C Against Thermal Expansion Coefficients at 15 Degre
API MPMS 11.4.1-2003 Measurement StandardsChapter 11Physical PropertiesData Section 4Properties of Reference Materials Part 1Density of Water and Water Volumetric Correction Factors for Water Calibration of Volumetric Provers (First Edition)
API PUBL 931 C20-1969 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON LIQUID WATES - CHAPTER 20 - SOLUBILITY AND TOXICITY DATA
API MPMS 11.4.1 ERTA-2011 Manual of Petroleum Measurement Standards Chapter 11—Physical Properties Data Section 4—Properties of Reference Materials Part 1—Density of Water and Water Volumetric Correction Factors for Water Calibration of Volumetric Provers (First Edition)
API MPMS 11.4.1-2018 Manual of Petroleum Measurement Standards Chapter 11-Physical Properties Data Section 4-Properties of Reference Materials Part 1-Density of Water and Water Volumetric Correction Factors for Water Calibration of Volumetric Provers (SECOND EDITION)
API MPMS 12.2.5 ERTA-2009 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 5 - Calculation of Base Prover Volume by Ma
API MPMS 12.2.5-2001 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 5 - Calculation of Base Prover Volume by Ma
API MPMS 12.2.4 ERTA-2009 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 4 - Calculation of Base Prover Volumes by t
API MPMS 12.2.4-1997 Manual of Petroleum Measurement Standards Chapter 12 - Calculation of Petroleum Quantities Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors Part 4 - Calculation of Base Prover Volumes by t
API MPMS 11.3.3-2011 Manual of Petroleum Measurement Standards Chapter 11.3.3 Miscellaneous Hydrocarbon Product Properties - Ethanol Density and Volume Correction Factors (First Edition)
API MPMS 11.3.4-2019 Manual of Petroleum Measurement Standards Chapter 11.3.4 Miscellaneous Hydrocarbon Product Properties— Denatured Ethanol and Gasoline Component Blend Densities and Volume Correction Factors (FIRST EDITION)

IT-UNI, volume fraction volume concentration

UNI CEN/TS 17405-2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry

VN-TCVN, volume fraction volume concentration

TCVN 6355-5-2009 Bricks.Test methods.Part 5: Determination of bulk density.
TCVN 3121-6-2003 Mortar for masonry.Test methods.Part 6: Determination of bulk density of fresh mortar
TCVN 4996-1-2011 Cereals.Determination of bulk density, called mass per hectolitre.Part 1: Reference method
TCVN 4996-3-2011 Cereals.Determination of bulk density, called mass per hectolitre.Part 3: Routine method
TCVN 7572-6-2006 Aggregates for concrete and mortar.Test methods.Pprt 6: Determination of bulk density and voids
TCVN 6530-3-1999 Refractories.Methods of test.Part 3: Determination of bulk density, water absorption, apparent porosity and true porosity

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, volume fraction volume concentration

GB/T 41736-2022 High volume fraction SiC particulate aluminum matrix composites
GB/T 41737-2022 Aluminum matrix composites-Test method for volume fraction of SiC-Dissolution method
GB/T 9272-2007 Paints and varnishes.Determination of percentage volume of non-volatile matter by measuring the density of a dried coating
GB/T 9966.3-2020 Test methods for natural stone—Part 3:Determination of water absorption,bulk density,true density and true porosity
GB/T 9966.3-2001 Test methods for natural facing stones Part 3: Test methods for bulk density,true density,true porosity and water absorption

ESDU - Engineering Sciences Data Unit, volume fraction volume concentration

ESDU 87017-1987 Orthobaric densities and molar volumes of liquids. Part 2A: C2 to C16 alkenes.
ESDU 87010 A-1987 Orthobaric densities and molar volumes of liquids. Part 1A: C1 to C18 alkanes.
ESDU 87022-1987 Orthobaric densities and molar volumes of liquids. Part 2B: alkadienes and alkynes.
ESDU 89018-1989 Orthobaric densities and molar volumes of liquids. Introduction to Data Items issued after July 1989.

PH-BPS, volume fraction volume concentration

PNS ISO 9136-1:2021 Abrasive grains - Determination of bulk density - Part 1: Macrogrits
PNS ISO 17892-2:2021 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., volume fraction volume concentration

ASHRAE 4406-2000 Computer Analysis and Comparison of Experimental Data for Moisture Accumulation in Concrete Masonry Walls
ASHRAE MN-00-1-3-2000 Computer Analysis and Comparison of Experimental Data for Moisture Accumulation in Concrete Masonry Walls (See Technical Paper 4406@ p.347)

Natural Gas Processor's Association (NGPA), volume fraction volume concentration

GPA RR-61-1982 Evaluation of the GPA Engineering Data Book Volume Correction Factor Table for Light Ends

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, volume fraction volume concentration

GJB 5443-2005 Specification for high volume fraction SiCp/Al composites

Society of Motion Picture and Television Engineers (SMPTE), volume fraction volume concentration

SMPTE ST 2086-2014 Mastering Display Color Volume Metadata Supporting High Luminance and Wide Color Gamut Images
SMPTE ST 2086-2018 Mastering Display Color Volume Metadata Supporting High Luminance and Wide Color Gamut Images

Standard Association of Australia （SAA）, volume fraction volume concentration

AS 5009.2:2003 Determination of particle size distribution by centrifugal liquid sedimentation methods - Photocentrifuge method
AS 1038.21.1.2:2002(R2013)
AS 1038.21.1.2:2002 Coal and coke - Analysis and testing - Higher rank coal and coke - Relative density - Analysis sample/volumetric method
ISO/IEC 23090-10:2022/Cor 1:2023 Information technology — Coded representation of immersive media — Part 10: Carriage of visual volumetric video-based coding data — Technical Corrigendum 1

Professional Standard - Agriculture, volume fraction volume concentration

NY/T 1881.6-2010 Densified biofuel-Test methods Part 6:Bulk density

Japanese Industrial Standards Committee (JISC), volume fraction volume concentration

JIS R 1639-2:1999 Test methods of properties of fine ceramic granules Part 2: Bulk density
JIS R 1619:1995 Testing method for size distribution of fine ceramic particles by liquid photosedimentation method
JIS B 8397:2002 Hydraulic fluid power -- Gas-loaded accumulators with separator -- Ranges of pressures and volumes and characteristic quantities

YU-JUS, volume fraction volume concentration

JUS B.F8.003-1979 Asbestos. Testing of quality by met elassification, determination of specific sur face, volume, density and dust content

Professional Standard - Machinery, volume fraction volume concentration

JB/T 8133.14-2013 Test method for physical-chemical properties of electrical carbon product.Part 14:Volume density

IN-BIS, volume fraction volume concentration

Guangdong Provincial Standard of the People's Republic of China, volume fraction volume concentration

DB44/T 1100.1-2012 Test methods for artificial stone: Part 1 Determination of bulk density and water absorption

Indonesia Standards, volume fraction volume concentration

SNI ISO 12625-3:2014 Tissue paper and tissue products — Part 3: Determination of thickness, bulking thickness, apparent bulk density and bulk

Professional Standard - Non-ferrous Metal, volume fraction volume concentration

YS/T 587.10-2006 Calcined coke for prebaked blocks. Testing methods. Part 10: Determination of bulk density (tapped)

Institute of Electrical and Electronics Engineers (IEEE), volume fraction volume concentration

SMPTE ST 2086:2018 ST 2086:2018 - SMPTE Standard - Mastering Display Color Volume Metadata Supporting High Luminance and Wide Color Gamut Images
SMPTE ST 2086:2014 ST 2086:2014 - SMPTE Standard - Mastering Display Color Volume Metadata Supporting High Luminance and Wide Color Gamut Images
ST 2086:2018 ST 2086:2018 - SMPTE Standard - Mastering Display Color Volume Metadata Supporting High Luminance and Wide Color Gamut Images
ST 2086:2014 ST 2086:2014 - SMPTE Standard - Mastering Display Color Volume Metadata Supporting High Luminance and Wide Color Gamut Images

Professional Standard - Commodity Inspection, volume fraction volume concentration

SN/T 1797.12-2008 Technical regulation on safety and sanitation for inspection of iron ore.Part 12:Bulk density for quality evaluation

未注明发布机构, volume fraction volume concentration

BS EN ISO 787-11:1995(2000) General methods of test for pigments and extenders — Part 11 : Determination of tamped volume and apparent density after tamping
BS 1902-3.17:1990(2011) Methods of testing Refractory materials — Part 3 : General and textural properties — Section 3.17 Determination of volume and bulk density of dense shaped products (methods 1902 - 317)
DIN EN 764:2004 Pressure equipment – Part 1: Terminology – pressure, temperature, volume, nominal size; German version EN 764-1:2004

CENELEC - European Committee for Electrotechnical Standardization, volume fraction volume concentration

EN 61779-5:2000 Electrical Apparatus for the Detection and Measurement of Flammable Gases - Part 5: Performance Requirements for Group II Apparatus Indicating a Volume Fraction Up to 100% Gas
EN 61779-4:2000 Electrical Apparatus for the Detection and Measurement of Flammable Gases - Part 4: Performance Requirements for Group II Apparatus Indicating a Volume Fraction Up to 100% Lower Explosive Limit
EN 61779-3:2000 Electrical Apparatus for the Detection and Measurement of Flammable Gases - Part 3: Performance Requirements for Group I Apparatus Indicating a Volume Fraction Up to 100% Methane in Air

Professional Standard - Petroleum, volume fraction volume concentration

SY/T 6477-2000 Evaluation Method for Residual Strength of Oil and Gas Transmission Pipelines Containing Defects Part 1: Volume Type Defects

Defense Logistics Agency, volume fraction volume concentration

DLA SMD-5962-94573 REV B-1996 MICROCIRCUIT, DIGITAL, CMOS, HISTOGRAMMER/ACCUMULATING BUFFER, MONOLITHIC SILICON

Professional Standard - Ocean, volume fraction volume concentration

HY/T 206-2016 Determination of iron, manganese,nickel,potassium,sodium,calcium and magnesium in the marine sediments and organisms.Atomic absorption spectrophotometry

National Aeronautics and Space Administration (NASA), volume fraction volume concentration

NASA-CR-213199 VOL 5-2004 Numerical, Analytical, Experimental Study of Fluid Dynamic Forces in Seals Volume 5-Description of Seal Dynamics Code DYSEAL and Labyrinth Seals Code KTK

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, volume fraction volume concentration

GB/T 3682.2-2018 Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 2: Method for materials sensitive to time-temperature history and/or moisture