ZH
RU
ES

real-time quantitative flow cytometry

real-time quantitative flow cytometry, Total:291 items.

In the international standard classification, real-time quantitative flow cytometry involves: Equipment for petroleum and natural gas industries, Paints and varnishes, Metalliferous minerals, Measurement of fluid flow, Hydraulic energy engineering, Powder metallurgy, Laboratory medicine, Farming and forestry, Installations in buildings, Meat, meat products and other animal produce, Medical equipment, Microbiology, Astronomy. Geodesy. Geography, Ferrous metals, Valves, Analytical chemistry, Construction materials, External sewage systems, Telecontrol. Telemetering, Linear and angular measurements, Water quality, Electrical accessories, Environmental protection, Biology. Botany. Zoology, Medical sciences and health care facilities in general, Transformers. Reactors, Milk and milk products, Lifting equipment, Non-destructive testing, Testing of metals, Thermodynamics and temperature measurements, Tea. Coffee. Cocoa, Measurement of volume, mass, density, viscosity, Petroleum, petroleum products and natural gas handling equipment, Refractories, Veterinary medicine, Cellular materials, General methods of tests and analysis for food products, Non-metalliferous minerals, Leather technology, Rectifiers. Convertors. Stabilized power supply, Protection of and in buildings, Fuels, Glass, Electrical wires and cables, Road engineering, Measurement of time, velocity, acceleration, angular velocity, Rubber, Road vehicles in general, Rubber and plastics products, Test conditions and procedures in general, Electronic display devices, Plastics, Rotating machinery, Pipeline components and pipelines, Radiation measurements, Capacitors, Fishing and fish breeding, Semiconductor devices, Lubricants, industrial oils and related products, Protection against fire, Electricity. Magnetism. Electrical and magnetic measurements, Electric traction equipment, Vibrations, shock and vibration measurements, Internal combustion engines, Electrical and electronic testing, Products of the textile industry, Non-textile floor coverings, Chocolate, Galvanic cells and batteries, Solar energy engineering, Petroleum products in general.

Professional Standard - Petroleum, real-time quantitative flow cytometry

SY/T 6797-2010 Real-time measuring and adjusting instrument of flooding well's layered flux
SY/T 6977-2014 The calibration method of real-time measuring and adjusting instrument of flooding well's layered flux
SY 6977-2014 Calibration method of real-time measuring and adjusting instrument for stratified flow in water injection well
SY/T 10019-1998 Maritime real-time differential global positioning system (DGPS) positioning measurement technical regulations
SY/T 6999-2014 General requirements for flow meters on-line verification with a traveling gas flow standard facility
SY 6999-2014 General requirements for on-line verification of flowmeters with mobile gas flow standard devices

国家能源局, real-time quantitative flow cytometry

SY/T 6797-2020 Water injection well stratified flow real-time measurement and adjustment instrument
NB/T 10385-2020 Technical specifications for real-time monitoring system of ecological flow in hydropower projects

British Standards Institution (BSI), real-time quantitative flow cytometry

BS EN ISO 2431:1996 Paints and varnishes - Determination of flow time by use of flow cups
BS EN ISO 2431:2011 Paints and varnishes. Determination of flow time by use of flow cups
BS ISO/TR 12765:1999 Measurement of fluid flow in closed conduits. Methods using transit-time ultrasonic flowmeters
BS EN ISO 4490:2002 Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter)
23/30456713 DC BS ISO 24062. Measurement of fluid flow in closed conduits. Clamp-on ultrasonic transit-time meters for liquids and gases
BS EN ISO 4490:2014 Metallic powders. Determination of flow rate by means of a calibrated funnel (Hall flowmeter)
BS EN ISO 4490:2008 Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter)
BS EN 62054-21:2004 Electricity metering equipment (a.c.) - Tariff and load control - Particular requirements for time switches
BS 6986-3:1990+A1:2012 Instant tea in solid form. Determination of moisture content (loss in mass at 103°)
BS EN 62054-21:2004+A1:2017 Electricity metering (AC). Tariff and load control. Particular requirements for time switches
BS EN 15590:2011 Solid recovered fuels. Determination of the current rate of aerobic microbial activity using the real dynamic respiration index
BS ISO 22007-7:2023 Plastics. Determination of thermal conductivity and thermal diffusivity - Transient measurement of thermal effusivity using a plane heat source
BS EN 150014:1997 Harmonized system of quality assessment for electronic components - Blank detail specification: Thyristor diodes, transient overvoltage suppressors
BS EN 150014:1995 Harmonized system of quality assessment for electronic components. Blank detail specification: Thyristor diodes, transient overvoltage suppressors
BS EN ISO 15216-1:2017+A1:2021 Microbiology of the food chain. Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR - Method for quantification
12/30251712 DC BS ISO/ASTM 52116. Practice for dosimetry for a self-contained dry-storage gamma-ray irradiator
BS EN 137000:1996 Harmonized system of quality assessment for electronic components - Generic specification: Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for use with motors
BS 1902-10.2:1994 Methods of testing refractory materials - Investment casting shell mould systems - Determination of permeability and standard air flow capacity at elevated temperatures - Section 10.2: Determination of permeability and standard air flow capacity at elevat
BS PD CEN/TS 15634-3:2016 Foodstuffs. Detection of food allergens by molecular biological methods. Hazelnut (Corylus avellana). Qualitative detection of a specific DNA sequence in chocolate by real-time PCR
BS PD CEN/TS 15634-4:2016 Foodstuffs. Detection of food allergens by molecular biological methods. Peanut (Arachis hypogaea). Qualitative detection of a specific DNA sequence in chocolate by real-time PCR

CEN - European Committee for Standardization, real-time quantitative flow cytometry

EN ISO 2431:1996 Paints and Varnishes - Determination of Flow Time by Use of Flow Cups

European Committee for Standardization (CEN), real-time quantitative flow cytometry

EN ISO 2431:2019 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2019, Corrected version 2019-09)
EN ISO 2431:2011 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011)
EN 535:1991 Paints and varnishes; determination of flow time by use of low cups (ISO 2431:1984 modified)
prEN 22431-1990 Paints and varnishes; determination of flow time by use of flow cups (ISO 2431, edition 1984 modified)
EN ISO 11691:2020 Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:2020)
EN ISO 11691:2009 Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995)
EN ISO 15216-1:2017 Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR - Part 1: Method for quantification
EN ISO 15216-1:2017/A1:2021 Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR - Part 1: Method for quantification - Amendment 1 (ISO 15216-1:2017/Amd 1:2021)

Standard Association of Australia （SAA）, real-time quantitative flow cytometry

AS 2879.9:2002 Alumina - Determination of flow time
AS 61010.2.032:2004 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement

VN-TCVN, real-time quantitative flow cytometry

TCVN 6816-2001 Measurement of fluid flow in closed conduits.Methods using transit-time ultrasonic flowmeters

Association Francaise de Normalisation, real-time quantitative flow cytometry

NF T30-070:2011 Paints and varnishes - Determination of flow time by use of flow cups.
NF T30-070:1996 Paints and varnishes. Determination of flow time by use of flow cups.
NF P18-452:1988 Concretes. Measuring the flow time of concretes and mortars using a workabilitymeter.
NF X10-104:1970 MEASUREMENT OF FLUID FLOW BY MEANS OF ORIFICE PLATES,NOZZLES AND VENTURI TUBES. GUIDE FOR PRACTICAL USE.
NF M60-823-3:2022 Nuclear energy - Radioactivity measurement in gaseous effluents - Determination of noble gas activity in gaseous effluents and gas discharge - Part 3 : real time monitoring used for the volumetric activity of noble gas
NF E29-312:1984 PRESSURE LOSS AND FLOW COEFFICIENTS OF VALVES. DEFINITIONS,CALCULATIONS AND PRACTICAL DETERMINATIONS FOR INCOMPRESSIBLE FLUIDS.
NF X10-107:1990 Assessment of uncertainty in the calibration and use of flow measurement devices. Part 1 : linear calibration relationships.
NF T66-020-2*NF EN 12846-2:2011 Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 2 : cut-back and fluxed bituminous binders.
NF S62-225*NF EN 12259-5:2003 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 5 : water flow detectors.
NF F41-020-7-2*NF EN 50123-7-2:2004 Railway applications - Fixed installations - D.C. switchgear - Part 7-2 : measurement, control and protection devices for specific use in d.c. traction systems - Isolating current transducers and other current measuring devices
NF E48-380:1990 Hydraulic fluid power. Positive displacement pumps, motors and integral transmissions. Determination of steady-state performance.
NF C42-020-2-032*NF EN IEC 61010-2-032:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032 : particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement
NF C42-020-2-032/A11*NF EN IEC 61010-2-032/A11:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-032 : particular requirements for hand-held and hand manipulated current sensors for electrical test and measurement
NF V08-670-1*NF EN ISO 15216-1:2017 Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR - Part 1 : method for quantification

International Organization for Standardization (ISO), real-time quantitative flow cytometry

ISO 2431:1993 Paints and varnishes; determination of flow time by use of flow cups
ISO 12242:2012 Measurement of fluid flow in closed conduits - Ultrasonic transit-time meters for liquid
ISO 7066-1:1989 Assessment of uncertainty in the calibration and use of flow measurement devices; part 1: linear calibration relationships
ISO/DIS 24062 Measurement of fluid flow in closed conduits — Clamp-on ultrasonic transit-time meters for liquids and gases
ISO/FDIS 24062:2023 Measurement of fluid flow in closed conduits — Clamp-on ultrasonic transit-time meters for liquids and gases
ISO 2431:1993/Cor 2:1999 Paints and varnishes - Determination of flow time by use of flow cups; Technical Corrigendum 2
ISO 2431:1993/Cor 1:1994 Paints and varnishes - Determination of flow time by use of flow cups; Technical Corrigendum 1
ISO 835-2:1981 Laboratory glassware; Graduated pipettes; Part 2 : Pipettes for which no waiting time is specified
ISO 3455:1976 Liquid flow measurement in open channels; Calibration of rotating-element current-meters in straight open tanks
ISO 835-3:1981 Laboratory glassware; Graduated pipettes; Part 3 : Pipettes for which a waiting time of 15 s is specified
ISO/ASTM 52116:2002 Practice for dosimetry for a self-contained dry-storage gamma-ray irradiator
ISO/ASTM 52116:2013 Practice for dosimetry for a self-contained dry-storage gamma irradiator
ISO/CD TR 20659-2:2023 Rheological test methods — Fundamentals and interlaboratory comparisons — Part 2: Determination of the time-dependent structural change (thixotropy).
ISO/DTR 20659-2:2023 Rheological test methods — Fundamentals and interlaboratory comparisons — Part 2: Determination of the time-dependent structural change (thixotropy).
ISO 8528-9:1995 Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibration
ISO 3148:1975 Radiators, convectors and similar appliances; Determination of thermal output; Test method using air-cooled closed booth
ISO 3149:1975 Radiators, convectors and similar appliances; Determination of thermal output; Test method using liquid-cooled closed booth
ISO 8528-9:2017 Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations
ISO 15216-1:2017 Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR - Part 1: Method for quantification
ISO 9239-2:2002 Reaction to fire tests for floorings - Part 2: Determination of flame spread at a heat flux level of 25 kW/m<(hoch)2>
ISO 19344:2015 | IDF 232:2015 Milk and milk products — Starter cultures, probiotics and fermented products — Quantification of lactic acid bacteria by flow cytometry
ISO 1133-2:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture

Danish Standards Foundation, real-time quantitative flow cytometry

DS/ISO 2431:1982 Paints and varnishes. Determination of flow time by use of flow cups
DS/EN ISO 1133-2:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture
DS/EN ISO 15216-1:2021 Microbiology of the food chain – Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR – Part 1: Method for quantification – Amendment 1 (ISO 15216-1:2017/Amd 1:2021)
DS/EN 61010-2-032:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement
DS/EN 61010-2-032:2013 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement

Korean Agency for Technology and Standards (KATS), real-time quantitative flow cytometry

KS M ISO 2431:2012 Paints and varnishes－Determination of flow time by use of flow cups
KS B ISO TR 12765:2005 Measurement of fluid flow in closed conduits－Methods using transit-time ultrasonic flowmeters
KS D ISO 4490:2010 Metallic powders-Determination of flow rate by means of a calibrated funnel(Hall flowmeter)
KS D ISO 4490:2013 Metallic powders－Determination of flow rate by means of a calibrated funnel(Hall flowmeter)
KS D 0035-2006 Metallic powders－Determination of flow time by means of a calibrated funnel(hall flowmeter)
KS D 0035-1985 Metallic powders－Determination of flow time by means of a calibrated funnel(hall flowmeter)
KS A 0611-1997 Method of measurement by variable area flowmeters
KS D 0035-2011 Metallic powders－Determination of flow time by means of a calibrated funnel(hall flowmeter)
KS D 0410-2012 Method for determination of flow rate at elevated temperatures for powder mixed intended for warm compacting
KS M ISO 2714:2003 Liquid hydrocarbons-Volumetric measurement by displacement meter systems other than dispensing pumps
KS M ISO 2714:2013 Liquid hydrocarbons－Volumetric measurement by displacement meter systems other than dispensing pumps
KS L ISO 835-2:2006 Laboratory glassware－Graduated pipettes－Part 2：Pipettes for which no waiting time is specified
KS L ISO 835-3:2006 Laboratory glassware-Graduated pipettes-Part 3:Pipettes for which a waiting time is 15 s is specified
KS M 1133-2-2016 Plastics － Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics － Part 2: Method for materials sensitive to time-temperature history and/or moisture
KS M ISO 1133-2:2016 Plastics － Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics － Part 2: Method for materials sensitive to time-temperature history and/or moisture
KS C 1010-2-32-2000(2020) Safety requirements for electrical equipment for measurement, control and laboratory use－Part 2－32：Particular requirements for hand－held current clamps for electrical measurement and test

German Institute for Standardization, real-time quantitative flow cytometry

DIN EN ISO 2431:2012 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011); German version EN ISO 2431:2011
DIN VDE 0661:1988 Portable protective devices intended for an increase in the protection level for 230 V a.c. rated voltage, 16 A rated current, rated residual current In 30 mA
DIN 51562-3:1985 Viscometry; determination of kinematic viscosity using the Ubbelohde viscometer; viscosity relative increment at short flow times
DIN 43751-4:1990 Measurement and control; digital measuring instruments; instruments for measuring time reference quantities; definitions, tests and data sheet details
DIN SPEC 91143-2:2012-09 Modern rheological test methods - Part 2: Thixotropy - Determination of the time-dependent structural change - Fundamentals and interlaboratory test; Text in German and English
DIN 51562-3:1985-05 Viscometry; determination of kinematic viscosity using the Ubbelohde viscometer; viscosity relative increment at short flow times / Note: To be replaced by DIN 53000-4 (2019-04).
DIN 49440-4:1989 Two-pole socket-outlets with earthing rated for 10 A 250 V d.c., 16 A 250 V a.c.; gauges for portable socket-outlets
DIN 49440-4:1989-12 Two-pole socket-outlets with earthing rated for 10 A 250 V d.c., 16 A 250 V a.c.; gauges for portable socket-outlets
DIN 51810-2:2011 Testing of lubricants - Testing rheological properties of lubricating greases - Part 2: Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system
DIN EN 50123-7-2:2003 Railway applications - Fixed installations; D.C. switchgear - Part 7-2: Measurement, control and protection devices for specific use in d.c. traction systems; Isolating current transducers and other current measuring devices; German version EN 50123-7-2:2
DIN 51810-2:2017 Testing of lubricants - Testing rheological properties of lubricating greases - Part 2: Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system
DIN EN ISO 7235:2010-01 Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003); German version EN ISO 7235:2009
DIN EN ISO 11691:2021 Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:2020); German version EN ISO 11691:2020
DIN V VDE V 0126-18-4-2:2007 Solar wafers - Part 4-2: Process for measuring the electrical characteristics of silicon - Minority carrier lifetime, Laboratory measuring method
DIN EN ISO 11691:2010 Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995); German version EN ISO 11691:2009

RO-ASRO, real-time quantitative flow cytometry

STAS R 12091-1982 MEASUREMENT OF FLUID FLOW Estimation of uncertainty af a flow-rate measurement
STAS 11232/5-1981 Stabilized power supplies, d.c. outputTEMPERATURE EFFECT, TRANSIENT PERFORMANCE MEASUREMENT, SETTLING EFFECTS Prescription

HU-MSZT, real-time quantitative flow cytometry

Japanese Industrial Standards Committee (JISC), real-time quantitative flow cytometry

JIS Z 8765:1980 Method of flow measurement by turbine meters

Professional Standard - Agriculture, real-time quantitative flow cytometry

GB/T 42753-2023 General rules for performance evaluation of real-time fluorescent quantitative PCR instrument
NY/T 2743-2015 Technical regulations for inspection and quarantine of Xanthomonas albilineans (Ashby)Dowson.Real time PCR method

BE-NBN, real-time quantitative flow cytometry

NBN T 03-383-1981 Sulphur for industrial use - Determination of loss in mass at 80 °C
NBN-EN 535-1992 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431, edition 1984 modified)
NBN T 03-542-1983 Acid-grade fluorspar - Determination of loss in mass at105 °C
NBN T 03-530-1983 Sodium hexafluorosilicate for industrial use - Determination of loss in mass at 105 °C
NBN-EN 27842-1992
NBN T 03-405-1983 Aluminium oxide primarily used for the production of aluminium - Determination of loss of mass at 1000 °C and 1200 °C
NBN T 03-402-1983 Aluminium oxide primarily used for the production of aluminium - Determination of loss of mass at 300 °C (conventional moisture)
NBN 819 ADD 7-1991 AUTOMATISCHE AARDSTROOMSCHAKELAARS MET DIFFERENTIEELINRICHTING Bijkomende voorschriften voor automatische aardstroomschakelaars met een nominale spanning niet groter dan 415 V

IETF - Internet Engineering Task Force, real-time quantitative flow cytometry

RFC 4383-2006 The Use of Timed Efficient Stream Loss-Tolerant Authentication (TESLA) in the Secure Real-time Transport Protocol (SRTP)

National Metrological Verification Regulations of the People's Republic of China, real-time quantitative flow cytometry

JJG 461-2010 Verification Regulation of Target Flowmeter
JJG 198-1994 Verification Regulation of Velocity Flowmeter
JJG 640-1994 Verification Regulation of Differential Pressure Type Flowmeter
JJG 461-1986 Verification Regulation of Target(Bluff Body)Type Flow Transducer
JJG(化工) 17-1989 Target Flow Transmitter Verification Regulations
JJG(化工) 30-1989 Target Flow Transmitter Verification Regulations
JJG 667-1997 Verification Regulation of Liquid Positive Displacement Flow Meter
JJG 667-2010 Verification Regulation of Liquid Positive Displacement Flowmeter
JJG 237-1995 Verification Regulation of Time Interval Measuring Instrument with Needle Indication
JJG 238-1995 Verification Regulation of Digital Time Interval Measuring Instrument
JJG 165-2005 Verification rules for bell type gas flow standard device
JJG 818-2018 Verification regulations for magnetic and eddy current coating thickness measuring instruments

Group Standards of the People's Republic of China, real-time quantitative flow cytometry

T/SBX 057-2022 Real-time Fluorescent Quantitative PCR Method for Determination of Murine Oncolytic Vaccinia Virus
T/ZAQ 10117-2023 Determination of Microcystis Gene in Water Real-time Quantitative PCR methods
T/SSMT 5-2021 Differential data format for Precise Point Positioning (PPP) and PPP-RTK
T/SDSNCH 001-2022 Qualitative detection of bovine and sheep-derived components in donkey milk by real-time fluorescent quantitative PCR
T/SHZSAQS 015-2020 Technical regulations for efficient detection of SNP sites of Fecb gene in sheep with multiple fetuses by real-time fluorescent quantitative PCR

Society of Motion Picture and Television Engineers (SMPTE), real-time quantitative flow cytometry

SMPTE 396M-2003 For Television - Packet Format and Transmission Timing of DV-Based Data Streams over IEEE 1394

国家市场监督管理总局、中国国家标准化管理委员会, real-time quantitative flow cytometry

GB/T 19495.5-2018 Detection of genetically modified organisms and derived products—Quantitative real-time polymerase chain reaction（PCR） methods
GB/T 39616-2020 Specification for network real-time kinematic（RTK） surveys based on the reference stations using global navigation satellite system
GB/T 19495.4-2018 Detection of genetically modified organisms and derived products—Qualitative real-time polymerase chain reaction（PCR） methods
GB/T 38421-2019 Fur—Detection of animal derived material—Qualitative real-time polymerase chain reaction (PCR) methods

American National Standards Institute （ANSI), real-time quantitative flow cytometry

ANSI B109.1-2000 Diaphragm-Type Gas Displacement Meters (Under 500 Cubic Feet Per Hour Capacity)
ISO/DIS 24062:2023 Measurement of fluid flow in closed conduits - Clamp-on ultrasonic transit-time meters for liquids and gases
ANSI B109.2-2000 Diaphragm-Type Gas Displacement Meters (500 Cubic Feet Per Hour Capacity and Over)
ANSI Z21.10.3-2004 Gas Water Heaters, Vol. III, Storage Water Heaters with Input Ratings Above 75,000 Btu Per Hour, Circulating and Instantaneous
ANSI/IEEE C57.110:2008 Recommended Practice for Establishing Liquid-Filled and Dry-Type Power and Distribution Transformer Capability When Supplying Nonsinusoidal Load Currents

IT-UNI, real-time quantitative flow cytometry

UNI 2326-1943
UNI 2330-1943
UNI 2325-1943
UNI 2328-1943
UNI 1570-1575-1941
UNI 1581-1589-1941
UNI EN ISO 15216-1:2021 Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR - Part 1: Method for quantification

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, real-time quantitative flow cytometry

GB/T 38164-2019(英文版) Identification of animal ingredient from common livestock and poultry—Realtime PCR
GB/T 21458-2008 Mobile cranes.Presentation of rated capacity charts
GB/T 9109.2-1988 Dynamic measurement of crude oil--The technical requirement of displacement meter installation
GB/T 18945-2003 Polymeric materials,cellular flexibl--Method of assessment of air flow value at constant pressure-drop
GB/T 32551-2016 Fluorspar powder in bulk.Determination of transportable moisture limits.Flow-table method
GB/T 9109.4-1988 Dynamic measurement of crude oil--The operating stipulations of verificating positive displacement meters by pipe prover

未注明发布机构, real-time quantitative flow cytometry

BS 4161-1:1967(1999) Specification for Gas meters — Part 1 : Meters of plate construction up to 1000 cubic feet per hour rating
BS 4161-4:1970(1999) Specification for Gas meters — Part 4 : Plate constructed positive displacement diaphragm meters for a pressure of 350 mbar (5 lbf / in2) and up to 170 cubic metres (6000 cubic feet) per hour rating

American Gas Association, real-time quantitative flow cytometry

AGA B109.1-2000 Diaphragm Type Gas Displacement Meters (under 500 Cubic Feet Per Hour Capacity) Fourth Edition; XQ0008
AGA B109.2-2000 Diaphragm Type Gas Displacement Meters (500 Cubic Feet per Hour Capacity and over) Fourth Edition; XQ0009

Liaoning Provincial Standard of the People's Republic of China, real-time quantitative flow cytometry

DB21/T 2627-2016 Real-time quantitative PCR detection method for fish lymphocyst virus
DB21/T 3273-2020 Identification method of porcine pseudorabies virus field strain and gE gene deletion vaccine strain by TaqMan real-time fluorescent quantitative PCR

Shaanxi Provincial Standard of the People's Republic of China, real-time quantitative flow cytometry

DB61/T 1520-2021 Specification for performance evaluation of real-time fluorescence quantitative PCR analyzer

Professional Standard - Surveying and Mapping, real-time quantitative flow cytometry

CH/T 2009-2010 Specifications for global positioning system real-time kinematic (RTK) surveys

IN-BIS, real-time quantitative flow cytometry

IS 5477 Pt.3-1969

Guizhou Provincial Standard of the People's Republic of China, real-time quantitative flow cytometry

DB52/T 841-2013 Integral gas timing automatic shut-off and over-current cut-off control device

Taiwan Provincial Standard of the People's Republic of China, real-time quantitative flow cytometry

CNS 5477-1980 Method of Test for Constancy of Mass on Ignition for Porcelain Laboratory Apparatus
CNS 15084-2-2007 Measurement of water flow in closed conduits - Combination meters for cold potable water - Part 2 : Installation requirements

American Society for Testing and Materials (ASTM), real-time quantitative flow cytometry

ASTM F2550-06 Standard Practice for Locating Leaks in Sewer Pipes Using Electro-Scan--the Variation of Electric Current Flow Through the Pipe Wall
ASTM D5540-13 Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis
ASTM D8107-18 Standard Practice for Determining Sediment Pond Skimmer Flow Rate
ASTM D8107-17 Standard Practice for Determining Sediment Pond Skimmer Flow Rate
ASTM E1629-12 Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes
ASTM F2550-13 Standard Practice for Locating Leaks in Sewer Pipes By Measuring the Variation of Electric Current Flow Through the Pipe Wall
ASTM C1446-99 Standard Test Method for Measuring Consistency and Working Time of Self-Flowing Castable Refractories
ASTM D5541-94(2008) Standard Practice for Developing a Stage-Discharge Relation for Open Channel Flow
ASTM C1662-17 Standard Practice for Measurement of the Glass Dissolution Rate Using the Single-Pass Flow-Through Test Method
ASTM D3566-03(2014) Standard Practice for Rubber—Determination of Bromine in the Presence of Chlorine by Oxygen Combustion
ASTM D3566-03(2009) Standard Practice for Rubber8212;Determination of Bromine in the Presence of Chlorine by Oxygen Combustion
ASTM E1448/E1448M-09(2015) Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness
ASTM C1815-17(2021) Standard Practice for Periodically Measuring and Monitoring Sealant Dimensions to Stability Following a Period of Compression or Tension
ASTM D6624-19 Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data
ASTM D6624-20 Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data
ASTM F1844-97(2016) Standard Practice for Measuring Sheet Resistance of Thin Film Conductors For Flat Panel Display Manufacturing Using a Noncontact Eddy Current Gage
ASTM E2426-10(2019) Standard Practice for Pulse Counting System Dead Time Determination by Measuring Isotopic Ratios with SIMS
ASTM D3566-03 Standard Practice for Rubber8212;Determination of Bromine in the Presence of Chlorine by Oxygen Combustion
ASTM E2426-05 Standard Practice for Pulse Counting System Dead Time Determination by Measuring Isotopic Ratios with SIMS
ASTM E2603-08 Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
ASTM F948-94(2001)e1 Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
ASTM F948-94 Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
ASTM ISO/ASTM 52116-13 Standard Practice for Dosimetry for a Self-Contained Dry-Storage Gamma Irradiator
ASTM ISO/ASTM 52116-13(2020) Standard Practice for Dosimetry for a Self-Contained Dry-Storage Gamma Irradiator
ASTM ISO/ASTM52116-13(2020) Standard Practice for Dosimetry for a Self-Contained Dry-Storage Gamma Irradiator
ASTM ISO/ASTM52116-13 Standard Practice for Dosimetry for a Self-Contained Dry-Storage Gamma Irradiator
ASTM D7394-18(2023) Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers
ASTM E722-09e1 Standard Practice for Characterizing Neutron Fluence Spectra in Terms of an Equivalent Monoenergetic Neutron Fluence for Radiation-Hardness Testing of Electronics
ASTM D6624-06 Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data
ASTM D6624-01 Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data
ASTM D6624-12 Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data
ASTM D6624-14 Standard Practice for Determining a Flow-Proportioned Average Property Value &40;FPAPV&41; for a Collected Batch of Process Stream Material Using Stream Analyzer Data
ASTM D7394-13 Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers
ASTM F1844-97(2008) Standard Practice for Measuring Sheet Resistance of Thin Film Conductors For Flat Panel Display Manufacturing Using a Noncontact Eddy Current Gage
ASTM D6604-00(2009)e1 Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry
ASTM ISO/ASTM 52116-02 Standard Practice for Dosimetry for a Self-Contained Dry-Storage Gamma-Ray Irradiator
ASTM ISO/ASTM52116-02 Standard Practice for Dosimetry for a Self-Contained Dry-Storage Gamma-Ray Irradiator

ESDU - Engineering Sciences Data Unit, real-time quantitative flow cytometry

CFD-BPG 07008-2007 CFD Best Practice Guidelines for modelling pressure loss and flow characteristics. Incompressible flow in sudden contractions.
ESDU 69007 B-1981 The determination of gross thrust and mass flow in flight. (Air breathing ducted-flow engines with convergent nozzles.)

BR-ABNT, real-time quantitative flow cytometry

ABNT NBR 14005 Versão Corrigida-1997 Velocity water-meter for cold water with nominal flow rate 15 m³/h until 1 500 m³/h

农业农村部, real-time quantitative flow cytometry

NY/T 3166-2017 Real-time fluorescence quantitative PCR method for detection of silkworm polyhedrovirus

Jilin Provincial Standard of the People's Republic of China, real-time quantitative flow cytometry

DB22/T 3375-2022 Hypertension medication guidance gene detection real-time fluorescence quantitative PCR method

National Aeronautics and Space Administration (NASA), real-time quantitative flow cytometry

NASA-TM-X-71903-1976 A theoretical study of the acoustic impedance of orifices in the presence of a steady grazing flow
NASA-TN-D-2280-1964 EXPERIMENTAL LOCAL HEAT-TRANSFER AND AVERAGE FRICTION DATA FOR HYDROGEN AND HELIUM FLOWING IN A TUBE AT SURFACE TEMPERATURES UP TO 5600° R

Institute of Electrical and Electronics Engineers (IEEE), real-time quantitative flow cytometry

IEEE Std C57.110/COR-2002 Recommended practice for establishing transformer capability when supplying nonsinusoidal load currents
IEEE Std C57.110™-2018 IEEE Recommended Practice for Establishing Liquid-Immersed and Dry-Type Power and Distribution Transformer Capability When Supplying Nonsinusoidal Load Currents
IEEE Std C57.110(TM)-2018 IEEE Recommended Practice for Establishing Liquid-Immersed and Dry-Type Power and Distribution Transformer Capability When Supplying Nonsinusoidal Load Currents
IEEE PC37.06.1/D7, October 2017 IEEE Draft Recommended Practice for Preferred Ratings for High-Voltage (>1000 volts) AC Circuit Breakers Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times
IEEE Std 2831-2023 IEEE Recommended Practice for Distributed Traveling Wave Fault Location Devices for High-Voltage Direct-Current (HVDC) Transmission Lines
IEEE 1580/COR-2008 Errata to IEEE Recommended Practice for Marine Cable for Use on Shipboard and Fixed or Floating Platforms
SMPTE ST 2110-21:2022 ST 2110-21:2022 - SMPTE Standard - Professional Media Over Managed IP Networks: Traffic Shaping and Delivery Timing for Video
ST 2110-21:2022 ST 2110-21:2022 - SMPTE Standard - Professional Media Over Managed IP Networks: Traffic Shaping and Delivery Timing for Video
ST 2110-21:2017 ST 2110-21:2017 - SMPTE Standard - Professional Media Over Managed IP Networks: Traffic Shaping and Delivery Timing for Video

国家质量监督检验检疫总局, real-time quantitative flow cytometry

SN/T 4737-2016 Real-time quantitative PCR detection method for specific genetically modified components in pigs and their products

YU-JUS, real-time quantitative flow cytometry

JUS M.C5.091-1985 Control valves. Flow capacity. Sizing equiations for compressible fluid flow under installed conditions
JUS M.C5.090-1985 Control valves. Flow capacity. Sizing equationsfor incompressible fluid flow under installed conditions

Association of German Mechanical Engineers, real-time quantitative flow cytometry

VDI/VDE 3522 Blatt 2-2014 Dynamic behaviour of contact thermometers - Experimental determination of time percentage values

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., real-time quantitative flow cytometry

ASHRAE 4155-1998 Advanced Feedback Control of Indoor Air Quality Using Real-Time Computational Fluid Dynamics
ASHRAE LO-09-022-2009 Experimental Investigation of the Effect of Various Parameters on the Infiltration Rates of Single Band Open Vertical Refrigerated Display Cases with Zero Back Panel Flow
ASHRAE 4071-1997 Derivations of Equations Necessary for Primary Airflow Redistribution in VAV Systems to Reduce Outdoor Air Intake While Meeting Ventilation Requirements

CN-STDBOOK, real-time quantitative flow cytometry

图书 A-4225 Thermal gas mass flowmeter, precession vortex flowmeter, hot water meter, water meter verification device

Zhejiang Provincial Standard of the People's Republic of China, real-time quantitative flow cytometry

DB33/T 2247-2020 RT-PCR and Real-time Fluorescent Quantitative RT-PCR Detection Method of Duck Tembusu Virus

Canadian Standards Association (CSA), real-time quantitative flow cytometry

CSA/AM CSA/ANSI Z21.10.3-2004 Gas Water Heaters; Volume III - Storage Water Heaters with Input Ratings Above 75,000 Btu per Hour, Circulating and Instantaneous Third Edition; CSA 4.3-2004
CSA 4.3B-2004-2008 Gas Water Heaters, Volume III, Storage Water Heaters with Input Ratings Above 75,000 Btu Per Hour, Circulating and Instantaneous Third Edition

NEMA - National Electrical Manufacturers Association, real-time quantitative flow cytometry

NEMA IB 4-1987 DETERMINATION OF AMPEREHOUR AND WATTHOUR CAPACITY OF LEAD-ACID INDUSTRIAL STORAGE BATTERIES FOR STATIONARY SERVICE

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, real-time quantitative flow cytometry

GB/T 34745-2017 Porcine circovirus type 2—Method of detecting virus by SYBR GreenⅠreal-time PCR

Agricultural Standard of the People's Republic of China, real-time quantitative flow cytometry

农业部2259号公告-5-2015 Detection of genetically modified organisms and derived products.Technical guidelines for development of real-time quantitative PCR methods

Tianjin Provincial Standard of the People's Republic of China, real-time quantitative flow cytometry

DB12/T 653-2016 Quantitative Detection of Animal-derived Components in Fresh and Frozen Livestock and Poultry Meat by Real-time Fluorescent PCR
DB12/T 651-2016 Real-time fluorescent PCR method for quantitative detection of transgenic herbicide-tolerant soybean GTS40-3-2 and its derivatives

Ningxia Provincial Standard of the People's Republic of China, real-time quantitative flow cytometry

DB64/T 1599-2019 Real-time fluorescence quantitative PCR method for detection of Chlamydia psittaci with TaqMan MGB probe

U.S. Military Regulations and Norms, real-time quantitative flow cytometry

ARMY MIL-PRF-32222-2006 HEATER, VEHICULAR COMPARTMENT MULTIFUEL BURNING 24 VOLT, DC 15,000 - 30,000 BTU/HR

Professional Standard - Commodity Inspection, real-time quantitative flow cytometry

SN/T 3932-2014 Rapid detection of Bacillus Cereus for export foods.Real-time PCR method
SN/T 1843.2-2013 Rules for the inspection of electrical equipment for measurement, control, and laboratory use for import and export.Part 2:Alternating current static watt-hour meters

Shanghai Provincial Standard of the People's Republic of China, real-time quantitative flow cytometry

DB31/T 955-2015 Method of the real-time PCR for the detection and genotype of porcine circovirus subtype 2a/2b

International Electrotechnical Commission (IEC), real-time quantitative flow cytometry

IEC 61811-1:1999 Electromechanical non-specified time all-or-nothing relays of assessed quality - Part 1: Generic specification
IEC 62054-21:2017 Electricity metering (AC) - Tariff and load control - Part 21: Particular requirements for time switches

Professional Standard - Machinery, real-time quantitative flow cytometry

JB/T 10181.11-2014 Electric cables.Calculation of the current rating.Part 11: Current rating equations (100% load factor) and calculation of losses.General
JB/T 10181.1-2000 Calculation of the current rating of electric cables.Part 1:Current rating equations(100% load factor) and calculation of losses.Section 1:General

RU-GOST R, real-time quantitative flow cytometry

GOST R 55421-2013 General use highways. Emulsion bitumen road cationic. Method for determination of apparent viscosity

Fujian Provincial Standard of the People's Republic of China, real-time quantitative flow cytometry

DB35/T 1992-2021 Dual real-time fluorescent quantitative PCR differential diagnosis technique for Muscovy duck parvovirus and goose parvovirus

Indonesia Standards, real-time quantitative flow cytometry

SNI 04-0918.15-2001 Rotating electrical machines - Part 15: Impulse voltage with stand level of rotating a.c. machines with from-wound stator coils
SNI 7915-2013
SNI 7959-2014
SNI 8231.1-2016 Deteksi Megalocytivirus Bagian 1: Metode quantitative (real-time) polymerase chain reaction (qPCR) menggunakan hydrolysis probe
SNI 7914-2013
SNI 7913-2013
SNI 7916-2013

ES-UNE, real-time quantitative flow cytometry

IEEE 2831-2023 IEEE Recommended Practice for Distributed Traveling Wave Fault Location Devices for High-Voltage Direct-Current (HVDC) Transmission Lines

International Telecommunication Union (ITU), real-time quantitative flow cytometry

ITU-R BS.1349 SPANISH-1998 IMPLEMENTATION OF DIGITAL SOUND BROADCASTING TO VEHICULAR, PORTABLE AND FIXED RECEIVERS USING TERRESTRIAL TRANSMITTERS IN THE LF, MF AND HF BANDS

SE-SIS, real-time quantitative flow cytometry

SIS SS-ISO 1607-1:1991 Positive-displacement vacuum pumps — Measurement of performance characteris- tics — Part 1: Measurement of volume r?te of flow (pumping speed)

Xinjiang Provincial Standard of the People's Republic of China, real-time quantitative flow cytometry

DB65/T 4669-2023 Dual real-time fluorescence quantitative PCR detection method for peste des petits ruminants virus and infectious pustulitis virus

Professional Standard - Electron, real-time quantitative flow cytometry

SJ/T 9503.5-1991 Fixed polymer film dielectric metal foil d.c. capacitors--Quality grading standard
SJ/T 9503.7-1991 Fixed polyacrylate film dielectric metal foil d.c. capacitors--Quality grading standard
SJ/T 9503.6-1991 Fixed polytene film dielectric metal foil d.c. capacitors--Quality grading standard

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, real-time quantitative flow cytometry

ITU-T E.527-1995 Dimensioning at a Circuit Group with Multi-Slot Bearer Services and Overflow Traffic - Telephone Network and ISDN - Quality of Service@ Network Management and Traffic Engineering (Study Group 2) 7 pp

European Telecommunications Standards Institute (ETSI), real-time quantitative flow cytometry

ETSI EN 300 462-6-2-2000 Transmission and Multiplexing (TM); Generic Requirements for Synchronization Networks; Part 6-2: Timing Characteristics of Primary Reference Clocks; Implementation Conformance Statement (ICS) Proforma Specification (V1.1.1)
ETSI TR 126 937-2004 Universal Mobile Telecommunications System (UMTS); Transparent end-to-end Packet-switched Streaming Service (PSS); Real-time Transport Protocol (RTP) usage model 3GPP TR 26.937 Version 6.0.0 Release 6
ETSI TR 126 937-2003 Universal Mobile Telecommunications System (UMTS); Transparent end-to-end Packet switched Streaming Service (PSS); Real-time Transport Protocol (RTP) usage model 3GPP TR 26.937 version 5.0.0 Release 5
ETSI TR 126 937-2007 Universal Mobile Telecommunications System (UMTS); Transparent end-to-end packet switched streaming service (PSS); Real-time Transport Protocol (RTP) usage model V7.0.0; 3GPP TR 26.937 version 7.0.0 Release 7

Lithuanian Standards Office , real-time quantitative flow cytometry

LST EN ISO 1133-2:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011)
LST EN 61010-2-032-2013 Safety requirements for electrical equipment for measurement, control, and laboratory use -- Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement

Professional Standard - Medicine, real-time quantitative flow cytometry

YY 0286.6-2009 Special infusion sets.Part 6:Flow rate.setting and adjustable infusion sets for single use

TH-TISI, real-time quantitative flow cytometry

TIS 2005-2000 Safety requirement for electrical equipment for measurement, control and laboratory use.part 2: particular requirements for hand.held current clamp for electrical measurement and test

AT-OVE/ON, real-time quantitative flow cytometry

OVE EN IEC 62932-2-2:2021 Flow battery energy systems for stationary applications - Part 2-2: Safety requirements (german version)

European Committee for Electrotechnical Standardization（CENELEC）, real-time quantitative flow cytometry

EN 61010-2-032:2012 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement
EN IEC 61010-2-032:2021 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement

AENOR, real-time quantitative flow cytometry

UNE-EN 61010-2-032:2013 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement

Professional Standard - Energy, real-time quantitative flow cytometry

NB/SH/T 0874-2013 Crude peroleum and liquid petroleum products.Laboratory determination of density.Weighing digital liquid density meter method

ETSI - European Telecommunications Standards Institute, real-time quantitative flow cytometry

TS 126 245-2007 Universal Mobile Telecommunications System (UMTS); Transparent end-to-end Packet switched Streaming Service (PSS); Timed text format (V7.0.0; 3GPP TS 26.245 version 7.0.0 Release 7)