ZH
RU
ES

quantitative real-time quantitative

quantitative real-time quantitative, Total:499 items.

In the international standard classification, quantitative real-time quantitative involves: Laboratory medicine, Microbiology, Meat, meat products and other animal produce, Medical equipment, Astronomy. Geodesy. Geography, Milk and milk products, Farming and forestry, Analytical chemistry, Medical sciences and health care facilities in general, Biology. Botany. Zoology, Air quality, Measurement of volume, mass, density, viscosity, Metalliferous minerals, Paints and varnishes, Tea. Coffee. Cocoa, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Veterinary medicine, Measurement of time, velocity, acceleration, angular velocity, Electrical accessories, Power transmission and distribution networks, General methods of tests and analysis for food products, Materials for aerospace construction, Metrology and measurement in general, Cereals, pulses and derived products, Aircraft and space vehicles in general, Soil quality. Pedology, Equipment for petroleum and natural gas industries, Finances. Banking. Monetary systems. Insurance, Horology, Inorganic chemicals, Occupational safety. Industrial hygiene, Ergonomics, Rubber and plastics products, Test conditions and procedures in general, Photography, Vocabularies, Electricity. Magnetism. Electrical and magnetic measurements, Non-ferrous metals, Networking, Beverages, Rubber, Road vehicles in general, Quality, Nuclear energy engineering, Languages used in information technology, Applications of information technology, Radiation measurements, Raw materials for rubber and plastics, Installations in buildings, Energy and heat transfer engineering in general, Iron and steel products, Powder metallurgy, Construction materials, Earthworks. Excavations. Foundation construction. Underground works, Testing of metals, Transport, Leather technology, Ferrous metals, Electrical engineering in general, Electrical wires and cables, Protection against fire, Non-metalliferous minerals, Sports equipment and facilities, Fishing and fish breeding, Fuels, Surface treatment and coating, Protection of and in buildings, Wood-based panels, Refractories, Ceramics, Sugar. Sugar products. Starch, Measurement of fluid flow, Products of the textile industry, Acoustics and acoustic measurements, Edible oils and fats. Oilseeds, Information technology (IT) in general, Environmental protection, Inks. Printing inks, Hydraulic energy engineering, Thermodynamics and temperature measurements, Company organization and management, Linear and angular measurements, Protection against dangerous goods, Semiconductor devices, Fertilizers, Special measuring equipment for use in telecommunications, Earth-moving machinery, Pharmaceutics, Mining and quarrying, Character sets and information coding.

Group Standards of the People's Republic of China, quantitative real-time quantitative

T/SBX 057-2022 Real-time Fluorescent Quantitative PCR Method for Determination of Murine Oncolytic Vaccinia Virus
T/ZAQ 10117-2023 Determination of Microcystis Gene in Water Real-time Quantitative PCR methods
T/SDSNCH 001-2022 Qualitative detection of bovine and sheep-derived components in donkey milk by real-time fluorescent quantitative PCR
T/TDSTIA 035-2023 Real-time fluorescence PCR method for milk authenticity identification
T/SCAS 05-2021 High-precision real-time pose video measuring instrument
T/SCAS 06-2021 High-precision real-time pose video measurement method
T/SHZSAQS 015-2020 Technical regulations for efficient detection of SNP sites of Fecb gene in sheep with multiple fetuses by real-time fluorescent quantitative PCR
T/CSMT NY001-2021 standard of energy (water) consumption quota for metrology laboratory
T/CSMT NY 001-2021 Rated Standards for Energy (Water) Consumption in Metrology Laboratories
T/CITS 0002-2021 Detection of heavy mental cadmium in grain—Time-resolved fluorescent immunochromatographic method
T/CITS 0001-2021 Detection of heavy mental plumbum in grain—Time-resolved fluorescent immunochromatographic method
T/SDAS 413-2022 Identification of Dendrobium officinale-derived components by real-time fluorescent PCR
T/CGA 022-2021 Technical specifications for real-time monitoring of gold mine tailings dam stability

Professional Standard - Agriculture, quantitative real-time quantitative

GB/T 42753-2023 General rules for performance evaluation of real-time fluorescent quantitative PCR instrument
NY/T 2743-2015 Technical regulations for inspection and quarantine of Xanthomonas albilineans (Ashby)Dowson.Real time PCR method
SC/T 3060-2023 Identification of cod species by real-time fluorescent PCR method
247药典三部-2020 Assay method 3126 IgG assay method
SN/T 5604-2023

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, quantitative real-time quantitative

GB/T 38164-2019(英文版) Identification of animal ingredient from common livestock and poultry—Realtime PCR
GB/T 20468-2006 Guideline for internal quality control for quantitative measurements in clinical laboratory
GB/T 14598.7-1995 Electrical relays. Part 3: Single input energizing quantity measuring relays with dependent or independent time
GB/T 23249-2009 Coalbed gas content measurement methods in geological exploration period
GB/T 16592-1996 Powder coating--Determination of loss of mass on stoving
GB/T 15633-1995 Single input energizing quantify measuring relays and protective equipment with nonspecified-time
GB/T 24191-2009 Steel wire ropes.Determination of the actual modulus of elasticity
GB/T 41784-2022 Information technology—Real-time positioning—Visual positioning system data interface
GB/T 5158-1999 Metallic powders--Determination of loss of mass on hydrogen reduction (hydrogen loss)
GB/T 21782.7-2008 Coating powders.Part 7:Determination of loss of mass on stoving
GB/T 5158.2-2011 Metallic powders.Determination of oxygen content by reduction methods.Part 2: Loss of mass on hydrogen reduction(Hydrogen loss)
GB/T 31101-2023 Information technology real-time positioning system performance testing method

Liaoning Provincial Standard of the People's Republic of China, quantitative real-time quantitative

DB21/T 2627-2016 Real-time quantitative PCR detection method for fish lymphocyst virus
DB21/T 3273-2020 Identification method of porcine pseudorabies virus field strain and gE gene deletion vaccine strain by TaqMan real-time fluorescent quantitative PCR
DB21/T 2779-2017 Implementation Rules for Quality Appraisal of Highway Electromechanical Engineering

Shaanxi Provincial Standard of the People's Republic of China, quantitative real-time quantitative

DB61/T 1520-2021 Specification for performance evaluation of real-time fluorescence quantitative PCR analyzer

Professional Standard - Surveying and Mapping, quantitative real-time quantitative

CH/T 2009-2010 Specifications for global positioning system real-time kinematic (RTK) surveys

IN-BIS, quantitative real-time quantitative

Professional Standard - Petroleum, quantitative real-time quantitative

SY/T 10019-1998 Maritime real-time differential global positioning system (DGPS) positioning measurement technical regulations
SY/T 6797-2010 Real-time measuring and adjusting instrument of flooding well's layered flux
SY/T 6977-2014 The calibration method of real-time measuring and adjusting instrument of flooding well's layered flux
SY 6977-2014 Calibration method of real-time measuring and adjusting instrument for stratified flow in water injection well

国家质量监督检验检疫总局, quantitative real-time quantitative

SN/T 4737-2016 Real-time quantitative PCR detection method for specific genetically modified components in pigs and their products

Taiwan Provincial Standard of the People's Republic of China, quantitative real-time quantitative

CNS 5477-1980 Method of Test for Constancy of Mass on Ignition for Porcelain Laboratory Apparatus
CNS 5091-1986 Method of Laboratory Determination of Moisture Content of Soil

Jilin Provincial Standard of the People's Republic of China, quantitative real-time quantitative

DB22/T 3375-2022 Hypertension medication guidance gene detection real-time fluorescence quantitative PCR method
DB22/T 2052-2014 Real-time fluorescent PCR method for determination of Salmonella in feed
DB22/T 2053-2014 A real-time fluorescent PCR method for the determination of Aspergillus nidulans in feed

农业农村部, quantitative real-time quantitative

NY/T 3166-2017 Real-time fluorescence quantitative PCR method for detection of silkworm polyhedrovirus
NY/T 3309-2018 Real-time fluorescence qualitative PCR method for identification of meat-derived components
NY/T 3875-2021 Real-time fluorescence qualitative PCR method for identification of components derived from donkeys, mules and horses
NY/T 3308-2018 Real-time fluorescence qualitative PCR method for identification of animal skin-derived components
NY/T 3307-2018 Real-time fluorescence qualitative PCR method for identification of animal hair fiber-derived components

German Institute for Standardization, quantitative real-time quantitative

DIN ISO 11222:2002 Air quality - Determination of the uncertainty of the time average of air quality measurements (ISO 11222:2002)
DIN ISO 11222:2002-12 Air quality - Determination of the uncertainty of the time average of air quality measurements (ISO 11222:2002)
DIN V ENV 13005:1999 Guide to the expression of uncertainty in measurement; German version ENV 13005:1999
DIN 19745:2006 Soil quality - Principles of the determination of the water content by Time Domain Reflectometry (TDR) and Time Domain Transmissometry (TDT)
DIN 19745:2006-10 Soil quality - Principles of the determination of the water content by Time Domain Reflectometry (TDR) and Time Domain Transmissometry (TDT)
DIN EN ISO 2431:2012 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011); German version EN ISO 2431:2011
DIN 58902:2000 Haemostaseology - Reference measurement procedure for the determination of batroxobin time
DIN 10781:2000 Roasted ground coffee - Determination of loss in mass at 103 °C (Routine method for the determination of moisture content)
DIN 53552:1977 Testing of Carbon Black; Determination of the Amount of Components of Carbon Black that are Volatile on Heating
DIN 43751-4:1990 Measurement and control; digital measuring instruments; instruments for measuring time reference quantities; definitions, tests and data sheet details
DIN EN ISO 11771:2011-04 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010); German version EN ISO 11771:2010
DIN EN ISO 10565:1998 Oilseeds - Simultaneous determination of oil and water contents - Method using pulsed nuclear magnetic resonance spectrometry (ISO 10565:1998); German version EN ISO 10565:1998
DIN 43751-4:1990-06 Measurement and control; digital measuring instruments; instruments for measuring time reference quantities; definitions, tests and data sheet details / Note: Applies in conjunction with DIN 43751-1 (1987-05).
DIN 19015:1983 Timing in between-the-lens-shutters; technical terms, exposure times, synchro contacts, measuring devices
DIN 53552:2023-07 Testing of carbon black - Determination of the amount of components of carbon black that are volatile on heating
DIN EN ISO 26782:2009 Anaesthetic and respiratory equipment - Spirometers intended for the measurement of time forced expired volumes in humans (ISO 26782:2009); German version EN ISO 26782:2009
DIN 12691:1975 Laboratory glassware; one-mark pipettes, short delivery time, waiting time 15 s, class AS
DIN 12697:1975 Laboratory glassware; graduated pipettes, short delivery time, waiting time 15 s, class AS

International Organization for Standardization (ISO), quantitative real-time quantitative

ISO 835-2:1981 Laboratory glassware; Graduated pipettes; Part 2 : Pipettes for which no waiting time is specified
ISO 11222:2002 Air quality - Determination of the uncertainty of the time average of air quality measurements
ISO 835-3:1981 Laboratory glassware; Graduated pipettes; Part 3 : Pipettes for which a waiting time of 15 s is specified
ISO 1573:1975 Title missing - Legacy paper document
ISO 1573:1980 Tea; Determination of loss in mass at 103 degrees C
ISO 11294:1994 Roasted ground coffee - Determination of moisture content - Method by determination of loss in mass at 103 °C (Routine method)
ISO 3157:1991 Radioluminescence for time measurement instruments; specifications
ISO 516:2019 Camera shutters — Timing — General definition and mechanical shutter measurements
ISO 26782:2009 Anaesthetic and respiratory equipment - Spirometers intended for the measurement of time forced expired volumes in humans
ISO 6673:2003 Green coffee - Determination of loss in mass at 105 °C
ISO 6673:1983 Green coffee; Determination of loss in mass at 105 degrees C
ISO 7513:1990 Instant tea in solid form; determination of moisture content (loss in mass at 103 °C)
ISO 2850:1973 Potassium sulphate for industrial use; Determination of loss of mass at 105 degrees C
ISO 3426:1975 Sulphur for industrial use; Determination of loss in mass at 80 degrees C
ISO 2431:1993 Paints and varnishes; determination of flow time by use of flow cups
ISO 3084:1986 Iron ores; Experimental methods for evaluation of quality variation
ISO/TS 21749:2005 Measurement and uncertainty for metrological applications - Repeated measurements and nested experiments
ISO/ASTM 51400:2002 Practice for characterization and performance of a high-dose radiation dosimetry calibration laboratory
ISO 2483:1973 Sodium chloride for industrial use; Determination of the loss of mass at 110 degrees C
ISO 5444:1978 Sodium fluorosilicate for industrial use; Determination of loss in mass at 105 degrees C
ISO 11771:2010 Air quality - Determination of time-averaged mass emissions and emission factors - General approach
ISO 12076:2002 Steel wire ropes - Determination of the actual modulus of elasticity
ISO/ASTM 51939:2002 Practice for blood irradiation dosimetry
ISO/ASTM 51939:2005 Practice for blood irradiation dosimetry
ISO 3726:1983 Instant coffee; Determination of loss in mass at 70 degrees C under reduced pressure
ISO 7066-1:1989 Assessment of uncertainty in the calibration and use of flow measurement devices; part 1: linear calibration relationships
ISO/ASTM 51607:2002 Practice for use of the alanine-EPR dosimetry system
ISO 4282:1992 Acid-grade and ceramic-grade fluorspar; determination of loss in mass at 105 °C
ISO 12242:2012 Measurement of fluid flow in closed conduits - Ultrasonic transit-time meters for liquid
ISO 8130-7:2019 Coating powders — Part 7: Determination of loss of mass on stoving
ISO 15560:1998 Practice for characterization and performance of a high-dose radiation dosimetry calibration laboratory
ISO 11957:1996 Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements
ISO 15216-1:2017 Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR - Part 1: Method for quantification
ISO 124:1997/Amd 2:2008 Latex, rubber - Determination of total solids content - Amendment 2: Determination at temperatures higher than 105 °C
ISO 14033:2019 Environmental management — Quantitative environmental information — Guidelines and examples
ISO/ASTM 51538:2017 Practice for use of the ethanol-chlorobenzene dosimetry system
ISO 385-3:1984 Laboratory glassware; Burettes; Part 3 : Burettes for which a waiting time of 30 s is specified
ISO 8130-7:1992 Coating powders; part 7: determination of loss of mass on stoving
ISO/ASTM 51400:2003 Practice for characterization and performance of a high-dose radiation dosimetry calibration laboratory
ISO 10565:1993 Oilseeds; simultaneous determination of oil and moisture contents; method using pulsed nuclear magnetic resonance spectrometry
ISO 12141:2002 Stationary source emissions - Determination of mass concentration of particulate matter (dust) at low concentrations - Manual gravimetric method
ISO/CD 11781:2004 Foodstuffs — General guidelines for single-laboratory validation of qualitative real-time PCR methods
ISO 385-2:1984 Laboratory glassware; Burettes; Part 2 : Burettes for which no waiting time is specified
ISO/ASTM 51026:2015 Practice for using the Fricke dosimetry system
ISO 11274:2019 Soil quality — Determination of the water-retention characteristic — Laboratory methods

Korean Agency for Technology and Standards (KATS), quantitative real-time quantitative

KS L ISO 835-2:2006 Laboratory glassware－Graduated pipettes－Part 2：Pipettes for which no waiting time is specified
KS I ISO 11222:2021 Air quality — Determiniation of the uncertainty of the time average of air quality measurements
KS I ISO 11222-2006(2016) Air quality－Determination of the uncertainty of the time average of air quality measurements
KS I ISO 11222:2006 Air quality-Determination of the uncertainty of the time average of air quality measurements
KS L ISO 835-3:2006 Laboratory glassware-Graduated pipettes-Part 3:Pipettes for which a waiting time is 15 s is specified
KS H ISO 1573:2007 Tea-Determination of loss in mass at 103 ℃
KS H ISO 11294:2007 Roasted ground coffee-Determination of moisture content-Method by determination of loss in mass at 103 ℃(Routine method)
KS H ISO 7513-2007(2012) Instant tea in solid form－Determination of moisture content (loss in mass at 103 ℃)
KS B ISO 3157:2005 Radioluminescence for time measurement instruments－Specifications
KS H ISO 6673:2007 Green coffee－Determination of loss in mass at 105 ℃
KS M ISO 3426-2017(2022) Sulphur for industrial use — Determination of loss in mass at 80℃
KS H ISO 7513-2007(2021) Instant tea in solid form－Determination of moisture content (loss in mass at 103 ℃)
KS A ISO 516:2020 Camera shutters — Timing — General definition and mechanical shutter measurements
KS M 5978-1-1999
KS H ISO 7513:2007 Instant tea in solid form－Determination of moisture content (loss in mass at 103 ℃)
KS Q ISO 21749-2015(2020) Measurement uncertainty for metrological applications－Repeated measurements and nested experiments
KS M ISO 3426:2002 Sulphur for industrial use ? Determination of loss in mass at 80°C
KS M ISO 2483:2002 Sodium chloride for industrial use ? Determination of the loss of mass at 110°C
KS M ISO 2431:2012 Paints and varnishes－Determination of flow time by use of flow cups
KS M ISO 2483:2017 Sodium chloride for industrial use — Determination of the loss of mass at 110 degrees C
KS M ISO 3426:2017 Sulphur for industrial use — Determination of loss in mass at 80℃
KS I ISO 11771-2013(2018) Air quality ― Determination of time-averaged mass emissions and emission factors ― General approach
KS D ISO 12076-2006(2011) Steel wire ropes－Determination of the actual modulus of elasticity
KS Q ISO 21749:2012 Measurement uncertainty for metrological applications-Repeated measurements and nested experiments
KS Q ISO 21749:2015 Measurement uncertainty for metrological applications－Repeated measurements and nested experiments
KS M ISO 5444-2017(2022) Sodium fluorosilicate for industrial use — Determination of loss in mass at 105 degrees C
KS I ISO 11771:2013 Air quality ― Determination of time-averaged mass emissions and emission factors ― General approach
KS D ISO 12076:2006 Steel wire ropes-Determination of the actual modulus of elasticity
KS D ISO 12076:2013 Steel wire ropes－Determination of the actual modulus of elasticity
KS D 0410-2012 Method for determination of flow rate at elevated temperatures for powder mixed intended for warm compacting
KS E ISO 4282:2004 Acid-grade and ceramic-grade fluorspar-Determination of loss in mass at 105℃
KS H ISO 3726:2007 Instant coffee－Determination of loss in mass at 70 ℃ under reduced pressure
KS M ISO 5444:2007 Sodium fluorosilicate for industrial use－Determination of loss in mass at 105 degrees C
KS E ISO 4282:2013 Acid-grade and ceramic-grade fluorspar－Determination of loss in mass at 105℃
KS M ISO 5444:2017 Sodium fluorosilicate for industrial use — Determination of loss in mass at 105 degrees C
KS F 2865-2012 Laboratory measurements of the reduction of transmitted impact sound by floor coverings on a heavyweight standard floor
KS I ISO 11274-2005(2015) Soil quality－Determination of the water retention characteristic(Laboratory method)
KS I ISO TS 14033:2018 Environmental management — Quantitative environmental information — Guidelines and examples
KS L ISO 385-3:2010 Laboratory glassware－Burettes－Part 3：Burettes for which a waiting time of 30 s is specified
KS D ISO 4490:2010 Metallic powders-Determination of flow rate by means of a calibrated funnel(Hall flowmeter)
KS D ISO 4490:2013 Metallic powders－Determination of flow rate by means of a calibrated funnel(Hall flowmeter)
KS A ISO/ASTM 51400:2005 Practice for characterization and performance of a high-dose radiation dosimetry calibration laboratory
KS G ISO 6003:2019 Alpine skis－Determination of mass and polar moment of inertia－Laboratory measurement method
KS I ISO 12141:2007 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
KS L ISO 385-2:2010 Laboratory glassware－Burettes－Part 2：Burettes for which no waiting time is specified
KS L ISO 385-2-2010(2020) Laboratory glassware－Burettes－Part 2：Burettes for which no waiting time is specified

Association Francaise de Normalisation, quantitative real-time quantitative

NF ISO 11222:2002 Qualité de l'air - Détermination de l'incertitude de mesure de la moyenne temporelle de mesurages de la qualité de l'air
NF X43-504*NF ISO 11222:2002 Air quality - Determination of the uncertainty of the time average of air quality measurements.
NF V03-342:1981 Tea. Determination of loss in mass at 103 degrees C.
XP X43-331:1996 Qualité de l'air - Émissions de sources fixes - Détermination de l'intervalle de confiance d'une méthode de mesure en l'absence d'échantillon de référence par mesures parallèles simultanées.
NF T20-451:1976 Sodium sulphate for industrial use . Determination of loss in mass at 110 degrees C.
NF V05-105*NF EN 12145:1996 Fruit and vegetable juices. Determination of total dry matter. Gravimetric method with loss of mass on drying.
XP ISO/TS 21749:2005 Incertitude de mesure pour les applications en métrologie - Mesures répétées et expériences emboîtées
NF T30-070:2011 Paints and varnishes - Determination of flow time by use of flow cups.
NF T30-070:1996 Paints and varnishes. Determination of flow time by use of flow cups.
XP X06-066*XP ISO/TS 21749:2005 Measurement and uncertainty for metrological applications - Repeated measurements and nested experiments
NF A47-207*NF ISO 12076:2008 Steel wire ropes - Determination of the actual modulus of elasticity
NF C45-210:1974 Electrical relays. Single input energizing quantity measuring relays with non-specified time or with independent specified time.
NF C45-211:1985 Electrical relays. Single input energizing quantity measuring relays with dependent specified time.
NF ISO 7513:1991 Thé soluble sous forme solide - Détermination de la teneur en eau (perte de masse à 103 degrés Celsius)
NF V05-221:1983 Instant coffee. Determination of loss in mass at 70 degrees under reduced pressure.
NF X43-312*NF EN ISO 11771:2011 Air quality - Determination of time-averaged mass emissions and emission factors - General approach
NF C46-202:1988 Provisional prescriptions Industrial Process Measurement and Control Temperature sensors using platinum resistors Quality Assessment Prescriptions
NF V05-321*NF ISO 7513:1991 Instant tea in solid form. Determination of moisture content (loss in mass at 103 degrees celsius).
NF C32-073-2:1993 MEASUREMENT OF SMOKE DENSITY OF ELECTRIC CABLES BURNING UNDER DEFINED CONDITIONS. PART 2 : TEST PROCEDURE AND REQUIREMENTS.
NF P18-452:1988 Concretes. Measuring the flow time of concretes and mortars using a workabilitymeter.
NF B51-124*NF EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength.
NF X43-329:2003 Émissions de sources fixes - Prélèvement et mesurage d'hydrocarbures aromatiques polycycliques à l'émission
AFNOR SPEC Z77-103-0:2022 L'inclusion numérique : guide de bonnes pratiques pour une adaptation sur mesure
NF S52-706*NF ISO 6003:2018 Alpine skis - Determination of mass and polar moment of inertia - Laboratory measurement method
NF ISO 6003:2018 Skis alpins - Détermination de la masse et du moment d'inertie polaire - Méthode de mesurage en laboratoire
NF V03-916*NF EN ISO 10565:1998 Oilseeds. Simultaneous determination of oil and water contents. Method using pulsed nuclear magnetic resonance spectrometry.
XP ISO/TS 20914:2020 Laboratoires de biologie médicale - Recommandations pratiques pour l'estimation de l'incertitude de mesure
NF V08-670-1*NF EN ISO 15216-1:2017 Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR - Part 1 : method for quantification
NF X31-551:2014 Soil quality - Determination of the water-retention characteristic - Laboratory methods
NF X31-551*NF EN ISO 11274:2019 Soil quality - Determination of the water-retention characteristic - Laboratory methods

Danish Standards Foundation, quantitative real-time quantitative

DS/ISO 11222:2003 Air quality - Determination of the uncertainty of the time average of air quality measurements
DS/ISO 2431:1982 Paints and varnishes. Determination of flow time by use of flow cups
DS/ISO/TS 21749:2005 Measurement and uncertainty for metrological applications - Repeated measurements and nested experiments
DS/EN ISO 11771:2011 Air quality – Determination of time-averaged mass emissions and emission factors – General approach
DS/EN ISO 15216-1:2021 Microbiology of the food chain – Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR – Part 1: Method for quantification – Amendment 1 (ISO 15216-1:2017/Amd 1:2021)
DS/EN ISO 1741:1995 Dextrose - Determination of loss in mass on drying - Vacuum oven method
DS/ISO 11274/Corr. 1:2009 Soil quality - Determination of the water-retention characteristic - Laboratory methods
DS/ISO 11274:1999 Soil quality - Determination of the water-retention characteristics - Laboratory methods

AENOR, quantitative real-time quantitative

UNE-ISO 11222:2005 Air quality -- Determination of the uncertainty of the time average of air quality measurements
UNE 22145:1990 IRON ORES. DETERMINATION OF ACID SOLUBLE IRON (II) CONTENT. TRITIMETRIC METHOD.
UNE-EN ISO 11771:2011 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010)

KR-KS, quantitative real-time quantitative

KS I ISO 11222-2021 Air quality — Determiniation of the uncertainty of the time average of air quality measurements
KS M ISO 3426-2017 Sulphur for industrial use — Determination of loss in mass at 80℃
KS H ISO 7513-2022 Instant tea in solid form — Determination of moisture content (loss in mass at 103 ℃℃)
KS A ISO 516-2020 Camera shutters — Timing — General definition and mechanical shutter measurements
KS P ISO TS 20914-2022 Medical laboratories — Practical guidance for the estimation of measurement uncertainty
KS I ISO TS 14033-2018 Environmental management — Quantitative environmental information — Guidelines and examples
KS G ISO 6003-2019 Alpine skis－Determination of mass and polar moment of inertia－Laboratory measurement method

British Standards Institution (BSI), quantitative real-time quantitative

BS ISO 11222:2002 Air quality. Determination of the uncertainty of the time average of air quality measurements
BS ISO 11222:2007 Air quality - Determination of the uncertainty of the time average of air quality measurements
BS EN ISO 2431:1996 Paints and varnishes - Determination of flow time by use of flow cups
BS EN ISO 2431:2011 Paints and varnishes. Determination of flow time by use of flow cups
DD 204-1991 Guide to determination of exposure limits, recovery times and relaxation times in work measurement
PD 6461-4:2004 General metrology. Practical guide to measurement uncertainty
BS EN ISO 8130-7:1993 Coating powders. Determination of loss of mass on stoving
BS ISO 6673:2003 Green coffee - Determination of loss in mass at 105 °C
BS EN ISO 8130-7:2010 Coating powders. Determination of loss of mass on stoving
DD ISO/TS 21749:2005 Measurement and uncertainty for metrological applications. Repeated measurements and nested experiments
BS 6986-3:1990 Analysis of instant tea - Method for determination of moisture content (loss in mass at 103 °C)
BS 6986-3:1990+A1:2012 Instant tea in solid form. Determination of moisture content (loss in mass at 103°)
BS DD ISO/TS 21749:2005 Measurement and uncertainty for metrological applications - Repeated measurements and nested experiments
BS ISO 516:2019 Tracked Changes. Camera shutters. Timing. General definition and mechanical shutter measurements
BS EN ISO 11771:2011 Air quality. Determination of time-averaged mass emissions and emission factors. General approach
BS EN ISO 11771:2010 Air quality. Determination of time-averaged mass emissions and emission factors. General approach
BS EN ISO 15216-1:2017+A1:2021 Microbiology of the food chain. Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR - Method for quantification
PD 6461-4-2004 General metrology - Part 4: Practical guide to measurement uncertainty
BS EN 61811-1:1999 Electromechanical non-specified time all-or-nothing relays of assessed quality - Generic specification
BS EN 61811-1:2015 Electromechanical telecom elementary relays of assessed quality. Generic specification and blank detail specificatio
PD ISO/TS 20914:2019 Medical laboratories. Practical guidance for the estimation of measurement uncertainty
BS EN 62054-21:2004 Electricity metering equipment (a.c.) - Tariff and load control - Particular requirements for time switches
BS ISO 6003:2017 Alpine skis. Determination of mass and polar moment of inertia. Laboratory measurement method
BS ISO 11274:1999 Soil quality. Determination of the water-retention characteristic. Laboratory methods
BS ISO 11274:1998 Soil quality. Determination of the water retention characteristic. Laboratory methods
16/30344112 DC BS ISO/ASTM 51939. Practice for blood irradiation dosimetry
BS EN ISO 4491-2:1999 Metallic powders - Determination of oxygen content by reduction methods - Loss of mass on hydrogen reduction (hydrogen loss)
12/30251709 DC BS ISO/ASTM 51631. Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations
HB 10147-1999 The Millennium Time Bomb. A practical guide to the technical and legal issues.
BS ISO 15555:1998 Practice for use of a ceric-cerous sulfate dosimetry system
BS ISO 15570:1998 Practice for use of cellulose acetate dosimetry system
BS ISO/ASTM 52628:2020 Standard practice for dosimetry in radiation processing
BS 3375-5:1997 Management services. Guide to determination of exposure limits, recovery times and relaxation times in work measurement
BS ISO 12141:2002 Stationary source emissions. Determination of mass concentration of particulate matter (dust) at low concentrations. Manual gravimetric method
BS ISO 15571:1998 Practice for dosimetry in a gamma irradiation facility for radiation processing
BS EN ISO 11274:2019 Soil quality. Determination of the water-retention characteristic. Laboratory methods

未注明发布机构, quantitative real-time quantitative

BS ISO 11222:2002(2007) Air quality — Determination of the uncertainty of the time average of air quality measurements
BS ISO 6673:2003(2009) Green coffee — Determination of loss in mass at 105 °C
BS ISO 15568:1998(2000) Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations
BS ISO 15570:1998(2000) Practice for use of cellulose acetate dosimetry system

国家市场监督管理总局、中国国家标准化管理委员会, quantitative real-time quantitative

GB/T 39616-2020 Specification for network real-time kinematic（RTK） surveys based on the reference stations using global navigation satellite system
GB/T 19495.5-2018 Detection of genetically modified organisms and derived products—Quantitative real-time polymerase chain reaction（PCR） methods
GB/T 38627-2020 Information technology—Real-time positioning—Magnetic positioning data interface
GB/T 38630-2020 Information technology—Real-time positioning—Multi-source fusion positioning data interface
GB/T 40254-2021 Detection and identification of Verticillium Nees using real-time PCR
GB/T 40192-2021 Detection and identification of Colletotrichum Corda using real-time PCR
GB/T 40472-2021 Detection and identification of Cronartiaceae using real-time PCR

Standard Association of Australia （SAA）, quantitative real-time quantitative

AS 2879.9:2002 Alumina - Determination of flow time
AS 62054.21:2006 Electricity metering (ac) - Tariff and load control - Particular requirements for time switches

RU-GOST R, quantitative real-time quantitative

GOST R ISO 11222-2006 Air quality. Determination of the uncertainty of the time average of air quality measurements
GOST ISO 6673-2014 Green coffee. Determination of loss in mass at 105 °C
GOST 10840-1964 Grain. Methods of determination of the hectolitre weight
GOST R ISO 7513-2012 Instant tea. Determination of moisture content (loss in mass at 103 °S)
GOST 8.567-1999 State system for ensuring the uniformity of measurements. Time and frequency maesurements. Terms and definitions
GOST 30355.3-1996 Sulphur for industrial use. Determination of loss in mass at 80 °C
GOST 19338-1990 The suntetic rubber. The method for the determination of the mass loss on dryinq
GOST 18897-1998 Metallic powders. Determination of oxygen content by reduction methods. Loss of mass on hydrogen reduction (hydrogen loss)
GOST 18897-1973 Metal powder. Method for determination of metal powders losses while heating it in hydrogen
GOST IEC 61038-2011 Electricity metering. Tariff and load control. Particular requirements for time switches
GOST R ISO 11771-2016 Air quality. Determination of time-averaged mass emissions and emission factors. General approach
GOST 8.129-1999 State system for ensuring the uniformity of measurements. State verification schedule for means measuring time and frequency
GOST R 53068-2008 Green coffee. Determination of moisture mass fraction at 105 °C
GOST 8.129-1983 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for means measuring time and frequency
GOST R 51437-1999 Fruit and vegetable juices. Gravimetric method for determination of total dry matter by determining loss of mass on drying
GOST 8.567-2014 State system for ensuring the uniformity of measurements. Time and frequency measurements. Terms and definitions
GOST R 55955-2014 Standard practice for determination of gas content of coal
GOST 19728.17-2001 Talc and talcomagnesite. Method for determination of mass loss on ignition
GOST 8.377-1980 State system for ensuring the uniformity of measurements. Soft-magnetic materials. Methods of determination of static magnetic characteristics
GOST 24523.6-1980 Electrotechnical periclase. Method for the determination of mass change on ignition
GOST 28959-1991 Nitric acid for industrial use. Evaluation of the nitric acid concentration by measurement of density
GOST 19728.17-1974 Talc and talcmagnesite. Method for determination of mass loss on ignition
GOST 23740-1979 Soils. Methods of laboratory determination of organic composition
GOST R ISO 26782-2016 Anaesthetic and respiratory equipment. Spirometers intended for the measurement of time forced expired volumes in humans. Technical requirements and test methods
GOST 19656.9-1979 Semiconductor microwave varactors and multiplier diodes. Methods of measuring time constant and limiting frequency
GOST 8.129-2013 State system for ensuring the uniformity of measurements. State verification schedule for means measuring time and frequency
GOST EN 12048-2013 Solid fertilizers and liming materials. Determination of moisture content. Gravimetric method by drying at (105 ± 2) °C
GOST 19656.9-1974 Ultra-high frequency multiplication and parametric semiconductor diodes fixed time and limit frequency measurement methods
GOST R 55689-2013 Realtime audiovisual information system (RAVIS). Norms and methods of measurement assurance
GOST R ISO 17070-2009 Leather. Chemical tests. Determination of pentachlorophenol content

Zhejiang Provincial Standard of the People's Republic of China, quantitative real-time quantitative

DB33/T 2247-2020 RT-PCR and Real-time Fluorescent Quantitative RT-PCR Detection Method of Duck Tembusu Virus

CEN - European Committee for Standardization, quantitative real-time quantitative

EN ISO 2431:1996 Paints and Varnishes - Determination of Flow Time by Use of Flow Cups
EN ISO 8130-7:2019 Coating powders - Part 7: Determination of loss of mass on stoving

European Committee for Standardization (CEN), quantitative real-time quantitative

EN ISO 2431:2019 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2019, Corrected version 2019-09)
EN ISO 2431:2011 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011)
EN ISO 11771:2010 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010)
EN ISO 15216-1:2017 Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR - Part 1: Method for quantification
EN 535:1991 Paints and varnishes; determination of flow time by use of low cups (ISO 2431:1984 modified)
EN ISO 15216-1:2017/A1:2021 Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR - Part 1: Method for quantification - Amendment 1 (ISO 15216-1:2017/Amd 1:2021)
prEN 310-1992 Wood-based panels; determination of modulus elasticity, in bending and bending strength
EN ISO 8130-7:2010 Coating powders - Part 7: Determination of loss of mass on stoving
EN ISO 10565:1997 Oilseeds - Simultaneous Determination of Oil and Moisture Contents - Method Using Pulsed Nuclear Magnetic Resonance Spectrometry ISO 10565: 1993

Agricultural Standard of the People's Republic of China, quantitative real-time quantitative

农业部2259号公告-5-2015 Detection of genetically modified organisms and derived products.Technical guidelines for development of real-time quantitative PCR methods

VN-TCVN, quantitative real-time quantitative

TCVN 5613-2007 Tea.Determination of loss in mass at 103 degrees C
TCVN 5137-2009 Time and frequency measurements.Terms and definitions
TCVN 7035-2002 Roasted ground coffee.Determination of moisture content.Method by determination of loss in mass at 103oC (Routine method)
TCVN 5567-1991 Instant coffee.Determination of loss in mass at 70oC under reduced pressure

RO-ASRO, quantitative real-time quantitative

STAS 11256/1-1979 SINGLE INPUT ENERGIZING QUANTITY MEASURING RELAYS WITH NON-SPECIFIED TIME OR WITH INDEPENDENT SPECIFIED TIME General technical requirements for quality
STAS ISO 6673:1992 Green coffee. Determination of loss in mass at 105 degrees C
STAS R 12091-1982 MEASUREMENT OF FLUID FLOW Estimation of uncertainty af a flow-rate measurement
STAS 9682/10-1989 STIMULANTS TEA Determination of loss in mass at 103 degrees C
STAS 12027/8-1985 SINGLE INPUT ENERGIZING QUANTITY MEASURING ELECTRIC RELAYS WITH NON - SPECIFIED TIME, WITH INDEPENDENT AND DEPENDENT SPECIFIED TIME Quality technical requirements
STAS 8623/8-1974 PHOSPHORITES AND APATITES Determination of moisture content at delivery
STAS 4813/2-1973 BAUXITE Detenninalion of moisture content of laboratory sample
STAS 11256/2-1979 SINGLE INPUT ENERGIZING QUANTITY MEASURING RELAYS WITH DEPENDENT SPECIFIED TIME j General technical requirements for quality|
STAS 10803-1976 FILTER PAPER FOR SEMIQUANTATIVE AND QUANTATIVE ANALYSIS

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, quantitative real-time quantitative

GB/T 34745-2017 Porcine circovirus type 2—Method of detecting virus by SYBR GreenⅠreal-time PCR

Institute of Electrical and Electronics Engineers (IEEE), quantitative real-time quantitative

IEEE 1139-1988 Definitions of physical quantities for fundamental frequency and time metrology
IEEE 1139-1999 Definitions of physical quantities for fundamental frequency and time metrology - Random instabilities
IEEE Std 1139-1988 IEEE Standard Definitions of Physical Quantities for Fundamental Frequency and Time Metrology
IEEE Std 1139-1999 IEEE Standard Definitions of Physical Quantities for Fundamental Frequency and Time Metrology-Random Instabilities
IEEE 1139-2022 IEEE Standard Definitions of Physical Quantities for Fundamental Frequency and Time Metrology--Random Instabilities
IEEE Std 1139-2008 IEEE Standard Definitions of Physical Quantities for Fundamental Frequency and Time Metrology--Random Instabilities
IEEE Std 1139-2022 IEEE Standard Definitions of Physical Quantities for Fundamental Frequency and Time Metrology--Random Instabilities
IEEE Std Std 1139-2008 IEEE Standard Definitions of Physical Quantities for Fundamental Frequency and Time Metrology--Random Instabilities
IEEE P1139/D16, November 2021 IEEE Draft Standard Definitions of Physical Quantities for Fundamental Frequency and Time Metrology--Random Instabilities
IEEE Unapproved Draft Std P1139/D2, May 2008 IEEE Draft Standard for Definitions of Physical Quantities for Fundamental Frequency and Time Metrology - Random Instabilities
IEEE P1139/D17, November 2022 IEEE Draft Standard Definitions of Physical Quantities for Fundamental Frequency and Time Metrology--Random Instabilities
IEEE P1139/D18, May 2022 IEEE Draft Standard Definitions of Physical Quantities for Fundamental Frequency and Time Metrology--Random Instabilities

National Metrological Technical Specifications of the People's Republic of China, quantitative real-time quantitative

JJF 1688-2018 Calibration Specification for Real-time Focus Meters
JJF 1180-2007 Glossary and Definition of Time and Frequency Metrology

International Electrotechnical Commission (IEC), quantitative real-time quantitative

IEC 60255-3/COR1:1992 Electrical relays; part 3: single input energizing quantity measuring relays with dependent or independent time; Corrigendum 1
IEC 60255-3:1989 Electrical relays; part 3: single input energizing quantity measuring relays with dependent or independent time
IEC 61038:1998 Electricity metering - Tariff and load control - Particular requirements for time switches
IEC 60775:1983 Real-time BASIC for CAMAC

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., quantitative real-time quantitative

IEEE 1139-2008 Definitions of Physical Quantities for Fundamental Frequency and Time Metrology-Random Instabilities

Tianjin Provincial Standard of the People's Republic of China, quantitative real-time quantitative

DB12/T 653-2016 Quantitative Detection of Animal-derived Components in Fresh and Frozen Livestock and Poultry Meat by Real-time Fluorescent PCR
DB12/T 651-2016 Real-time fluorescent PCR method for quantitative detection of transgenic herbicide-tolerant soybean GTS40-3-2 and its derivatives

Ningxia Provincial Standard of the People's Republic of China, quantitative real-time quantitative

DB64/T 1599-2019 Real-time fluorescence quantitative PCR method for detection of Chlamydia psittaci with TaqMan MGB probe

HU-MSZT, quantitative real-time quantitative

Military Standards (MIL-STD), quantitative real-time quantitative

DOD A-A-51798-1987 PIPET TIP, BLOOD AND PLASMA COAGULATION TIMER
DOD A-A-54342-1991 LOOP, INOCULATING, LABORATORY (QUANTITATIVE)

Professional Standard - Electron, quantitative real-time quantitative

SJ 20225-1993 Verification regulation of LF group delay measuring set
SJ 20226-1993 Verification regulation of model 201/2 envelope delay measuring set

National Metrological Verification Regulations of the People's Republic of China, quantitative real-time quantitative

JJG 2007-1987 Verification System of Time and Frequency Measuring Instruments
JJG 2007-2007 Time and Frequency Measuring Instruments
JJG 953-2000 Verification Regulation of Precision Time Interval Meters
JJG(邮电) 034-1995 Verification Regulations for Precision Time Interval Measuring Instruments
JJG(机械) 70-1992 Verification regulations for impact cut-off time measuring instrument
JJG 720-1991 Verification Regulation of Wide Band Frequency Stability Measurement Set in Time Domain
JJG(电子) 01003-1989 Assessment specification for AD5121 digital group time delay measurement meters
JJG(电子) 01004-1989 Specification for verification of AD5122 microwave group delay measuring sets
JJG 237-1995 Verification Regulation of Time Interval Measuring Instrument with Needle Indication
JJG 238-1995 Verification Regulation of Digital Time Interval Measuring Instrument

GOSTR, quantitative real-time quantitative

GOST 10840-2017 Grain. Method for determination of hectolitre weight
GOST 34467-2018 Soils. Laboratory methods for determination of calcium carbonate content

CN-STDBOOK, quantitative real-time quantitative

图书 A-4755 Practical Evaluation of Uncertainty in Measurement (6th Edition)
图书 A-4134 Guidelines for the Implementation of Calorimeter Verification Techniques and Procedures
图书 a-4383 Top-down uncertainty assessment of quality control technology in inspection and testing laboratories

IETF - Internet Engineering Task Force, quantitative real-time quantitative

RFC 4711-2006 Real-time Application Quality-of-Service Monitoring (RAQMON) MIB
RFC 4710-2006 Real-time Application Quality-of-Service Monitoring (RAQMON) Framework

中国人民银行, quantitative real-time quantitative

JR/T 0182-2020 "Lightweight Real-time STEP Message Transfer Protocol"

国家能源局, quantitative real-time quantitative

SY/T 6797-2020 Water injection well stratified flow real-time measurement and adjustment instrument
NB/T 10385-2020 Technical specifications for real-time monitoring system of ecological flow in hydropower projects

CU-NC, quantitative real-time quantitative

NC 90-11-01-1986 Metrological Assurance. Time and Frequency Measurements Terms and Definitions
NC 57-50-8-1985 Clinical Methods and Aids Set of Reagents for Determination of Protrombine Time. Quality Specifications

ES-AENOR, quantitative real-time quantitative

American National Standards Institute （ANSI), quantitative real-time quantitative

ANSI/IEEE 1139:2008 Standard Definitions of Physical Quantities for Fundamental Frequency and Time Metrology - Random Instabilities
ANSI/ASTM D6259:1998 PRACTICE FOR DETERMINATION OF A POOLED LIMIT OF QUANTITATION
ANSI/ASTM E1939:2004 Practice for Blood Irradiation Dosimetry
ANSI/ASME B89.7.3.1-2001 Guidelines for Decision Rules: Considering Measurement Uncertainty in Determining Confirmation to Specification
ANSI/ASTM D6259:2015 Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method

American Society for Testing and Materials (ASTM), quantitative real-time quantitative

ASTM C1815-17(2021) Standard Practice for Periodically Measuring and Monitoring Sealant Dimensions to Stability Following a Period of Compression or Tension
ASTM D3566-03(2014) Standard Practice for Rubber—Determination of Bromine in the Presence of Chlorine by Oxygen Combustion
ASTM D3566-03(2009) Standard Practice for Rubber8212;Determination of Bromine in the Presence of Chlorine by Oxygen Combustion
ASTM E1448/E1448M-09(2015) Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness
ASTM D6512-07 Standard Practice for Interlaboratory Quantitation Estimate
ASTM D6512-07(2014) Standard Practice for Interlaboratory Quantitation Estimate
ASTM D6259-15(2019) Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method
ASTM E1655-05(2012) Standard Practices for Infrared Multivariate Quantitative Analysis
ASTM D6259-98(2010) Standard Practice for Determination of a Pooled Limit of Quantitation
ASTM E2426-10(2019) Standard Practice for Pulse Counting System Dead Time Determination by Measuring Isotopic Ratios with SIMS
ASTM D7783-21 Standard Practice for Within-laboratory Quantitation Estimation (WQE)
ASTM C1233-03 Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials
ASTM C1233-09 Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials
ASTM D3566-03 Standard Practice for Rubber8212;Determination of Bromine in the Presence of Chlorine by Oxygen Combustion
ASTM E2426-05 Standard Practice for Pulse Counting System Dead Time Determination by Measuring Isotopic Ratios with SIMS
ASTM ISO/ASTM 51631-13 Standard Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Routine Dosimeter Calibration
ASTM ISO/ASTM 51631-20 Standard Practice for Use of Calorimetric Dosimetry Systems for Dose Measurements and Routine Dosimetry System Calibration in Electron Beams
ASTM ISO/ASTM51631-20 Standard Practice for Use of Calorimetric Dosimetry Systems for Dose Measurements and Routine Dosimetry System Calibration in Electron Beams
ASTM E1655-17 Standard Practices for Infrared Multivariate Quantitative Analysis
ASTM D7440-23 Standard Practice for Characterizing Uncertainty in Air Quality Measurements
ASTM D7440-08(2015)e1 Standard Practice for Characterizing Uncertainty in Air Quality Measurements
ASTM D7440-08 Standard Practice for Characterizing Uncertainty in Air Quality Measurements
ASTM F2217/F2217M-13(2018) Standard Practice for Coating/Adhesive Weight Determination
ASTM D6259-23 Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method
ASTM ISO/ASTM 51400-02 Standard Practice for Characterization and Performance of a High-Dose Radiation Dosimetry Calibration Laboratory
ASTM ISO/ASTM51400-02 Standard Practice for Characterization and Performance of a High-Dose Radiation Dosimetry Calibration Laboratory
ASTM D5885-97 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry
ASTM D6259-15 Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method
ASTM F2217-02(2007) Standard Practice for Coating/Adhesive Weight Determination
ASTM F2217-02 Standard Practice for Coating/Adhesive Weight Determination
ASTM D2216-71 Standard Method of Laboratory Determination Of Moisture Content Of Soil
ASTM D8107-18 Standard Practice for Determining Sediment Pond Skimmer Flow Rate
ASTM D8107-17 Standard Practice for Determining Sediment Pond Skimmer Flow Rate
ASTM F2406-04(2012) Standard Practice for Determining Yield of Solid Ink Sticks
ASTM ISO/ASTM51939-17(2022) Standard Practice for Blood Irradiation Dosimetry
ASTM E2067-00a Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
ASTM D6780-02 Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR)
ASTM D6780-05 Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR)
ASTM F2217/F2217M-13 Standard Practice for Coating/Adhesive Weight Determination
ASTM F2217-02(2012) Standard Practice for Coating/Adhesive Weight Determination

US-FCR, quantitative real-time quantitative

FCR COE CWGS 16702-1993 REAL-TIME DIFFERENTIAL GLOBAL POSITIONING SYSTEM

Professional Standard - Commodity Inspection, quantitative real-time quantitative

SN/T 3932-2014 Rapid detection of Bacillus Cereus for export foods.Real-time PCR method
SN/T 4372-2015 Determination of oxidative-induction time of polyolefins.Differential scanning calorimetry

Shanghai Provincial Standard of the People's Republic of China, quantitative real-time quantitative

DB31/T 955-2015 Method of the real-time PCR for the detection and genotype of porcine circovirus subtype 2a/2b
DB31/ 205-2003 Blood alcohol content regulations for motor vehicle drivers while driving
DB31/ 205-1997 Blood alcohol content regulations for motor vehicle drivers while driving

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., quantitative real-time quantitative

ASHRAE 90446-2010 REAL-TIME ENERGY CONSUMPTION MEASUREMENTS IN DATA CENTERS
ASHRAE 4564-2002 Strategies for Operating Refrigerated Warehouse Under Real-Time Pricing (RP-1154)

CZ-CSN, quantitative real-time quantitative

CSN 36 1321-1983 Non - instantaneous stationary water heaters. Methods for measuring the performance
CSN 72 1012-1980 Laboratory determination of moisture content of soils
CSN 03 8403-1986 Agente of temporary protection against corrosion. Method of determínation of solvents content
CSN 72 1010-1989 Determination of earth volume mass. Laboratory and field methods

BE-NBN, quantitative real-time quantitative

NBN T 03-383-1981 Sulphur for industrial use - Determination of loss in mass at 80 °C
NBN T 03-542-1983 Acid-grade fluorspar - Determination of loss in mass at105 °C
NBN T 03-171-1980 Sodium sulphate for industrial use - Determination of loss in mass at 110 °C
NBN-EN 535-1992 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431, edition 1984 modified)
NBN T 03-530-1983 Sodium hexafluorosilicate for industrial use - Determination of loss in mass at 105 °C
NBN T 03-165-1980 Sodium chloride for industrial use - Détermination of the loss of mass at 110 °C

Professional Standard-Safe Production, quantitative real-time quantitative

AQ 1046-2007 Coalbed gas content measurement methods in geologiccal exploration period

Professional Standard - Military and Civilian Products, quantitative real-time quantitative

WJ 2355-1995 Fuze product standard time fixed batch factor

Military Standard of the People's Republic of China-General Armament Department, quantitative real-time quantitative

GJB 351-1987 Regulations on nuclear radiation control amounts for ship personnel during wartime
GJB 850-1990 Regulations on Wartime Nuclear Radiation Dose Limits for Airmen
GJB 6378-2008 Methods of spacecraft real-time orbit determination and analysis
GJB 5208-2004 Regulation for real-time transmission of TT&C information of airborne TT&C station
GJB 351-1996(XG1-2015) Modification of Wartime Nuclear Radiation Control Volume Regulations for Ship Personnel 1-2015

Japanese Industrial Standards Committee (JISC), quantitative real-time quantitative

JIS Z 8404-2:2008 Measurement uncertainty -- Part 2: Measurement uncertainty for metrological applications -- Repeated measurements and nested experiments
JIS Z 4574:2017 Standard practice for dosimetry in radiation processing

Association of German Mechanical Engineers, quantitative real-time quantitative

VDI/VDE/DGQ/DKD 2622 Blatt 2.1-2011 Calibration of measuring equipment for electrical quantities - Methods for the determination of measurement uncertainty - Notes to a practical approach

Indonesia Standards, quantitative real-time quantitative

SNI ISO/ASTM 51631:2014
SNI 7915-2013
SNI 7959-2014
SNI 8231.1-2016 Deteksi Megalocytivirus Bagian 1: Metode quantitative (real-time) polymerase chain reaction (qPCR) menggunakan hydrolysis probe

International Telecommunication Union (ITU), quantitative real-time quantitative

ITU-R TF.538-4-2017 Measures for random instabilities in frequency and time (phase)
ITU-R TF.538-3 FRENCH-1994 Measures for Random Instabilities in Frequency and Time (Phase)
ITU-R TF.538-3 SPANISH-1994 MEASURES FOR RANDOM INSTABILITIES IN FREQUENCY AND TIME (PHASE)

YU-JUS, quantitative real-time quantitative

JUS D.C8.108-1983 Testing ofparticle boards. Determination modu/us ofelasticity in bending
JUS H.G8.440-1990 Reagents. Potassium iodide. Determination of loss of mass on drving at 105 C. Gravinietric method
JUS C.A1.545-1990 Eardmetals. Chemical analysis by flame atomic absorption spectrometr?. Determl-nation of cobalt, ircm, manganese, molybdenum, nickel, titanium and vanadium ±n contents from 0,5 to 2 %(m/m)

SE-SIS, quantitative real-time quantitative

SIS 18 60 15 E-1973 In the event of any differences in interpretation of this standard the Swedish version shall take precedence over this translation.
SIS SEN 04 05 24
SIS 92 35 04-1974 Floorings. Determination of dimensional changes and loss in weight on heating
SIS 18 60 16 E-1973 In the event of any differences in interpretation of this standard the Swedish version shall take precedence over this translation.
SIS SEN 08 01 03-1966 Lead-acid accumulators. Checking the 10-hour-rate capacity of stationary batteries
SIS SEN 86 02 01

Fujian Provincial Standard of the People's Republic of China, quantitative real-time quantitative

DB35/T 1992-2021 Dual real-time fluorescent quantitative PCR differential diagnosis technique for Muscovy duck parvovirus and goose parvovirus

海关总署, quantitative real-time quantitative

SN/T 5338-2021 Real-time fluorescence PCR method for tiger species identification
SN/T 5480-2022 Technical Specification for Identification of Rainbow Trout Components by Real-time Fluorescent PCR Method

PL-PKN, quantitative real-time quantitative

PN B13027-1974 Labora?ory glassware Volumetric glassware Bang microburretfes
PN N97021-1991 Alpine skis. Determination of mass and polar moment of inertia. Laboratory measurement method

NL-NEN, quantitative real-time quantitative

NEN 6066-1991 Determination of the smoke production during fire of building products

IT-UNI, quantitative real-time quantitative

UNI 6024-1967
UNI 7092-1972
UNI EN ISO 15216-1:2021 Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR - Part 1: Method for quantification

Professional Standard - Machinery, quantitative real-time quantitative

JB/T 11844-2014 Evaluation methods of full mold iron castings surface quality

AT-ON, quantitative real-time quantitative

ONORM S 4070-1981 Cross country skis; mass, location of balance point; laboratory measurement method

Henan Provincial Standard of the People's Republic of China, quantitative real-time quantitative

DB41/T 1164-2015 Regulations for real-time monitoring of process quality nodes in highway engineering

Professional Standard - Aerospace, quantitative real-time quantitative

QJ 827-1984 Computer Automatic Measurement and Control (CAMAC) real-time language BASIC

Xinjiang Provincial Standard of the People's Republic of China, quantitative real-time quantitative

DB65/T 4669-2023 Dual real-time fluorescence quantitative PCR detection method for peste des petits ruminants virus and infectious pustulitis virus

American Society of Mechanical Engineers (ASME), quantitative real-time quantitative

ASME B89.7.1 TECH RPT-2016 Guidelines for Addressing Measurement Uncertainty in the Development and Application of ASME B89 Standards
ASME B89.7.1-2016 Guidelines for Addressing Measurement Uncertainty in the Development and Application of ASME B89 Standards
ASME B89.7.3.1-2001(R2019) Guideline for Decision Rules: Considering Measurement Uncertainty in Determining Conformance to Specifications

NEMA - National Electrical Manufacturers Association, quantitative real-time quantitative

NEMA IB 4-1987 DETERMINATION OF AMPEREHOUR AND WATTHOUR CAPACITY OF LEAD-ACID INDUSTRIAL STORAGE BATTERIES FOR STATIONARY SERVICE

CH-SNV, quantitative real-time quantitative

SNV 742 402.25-1971

American Institute of Aeronautics and Astronautics (AIAA), quantitative real-time quantitative

AIAA S-071A-1999 Assessment of Experimental Uncertainty with Application to Wind Tunnel Testing

Shandong Provincial Standard of the People's Republic of China, quantitative real-time quantitative

DB37/T 3533-2019 Real-time Fluorescent Qualitative PCR Method for Identification of Components Originated from Donkey and Mule Horsehide

Professional Standard - Hygiene , quantitative real-time quantitative

WS/T 415-2013 Assessment of laboratory tests when proficiency testing is not available

AASHTO - American Association of State Highway and Transportation Officials, quantitative real-time quantitative

R 54-2014 Standard Practice for Accepting Pavement Ride Quality When Measured Using Inertial Profiling Systems

The American Road & Transportation Builders Association, quantitative real-time quantitative

AASHTO R 54-2014 Standard Practice for Accepting Pavement Ride Quality When Measured Using Inertial Profiling Systems

Professional Standard - Nuclear Industry, quantitative real-time quantitative

EJ/T 752-1993 Simultaneous Determination of Trace Molybdenum and Tungsten in Rocks Containing Uranium by Oscillopolarography

Professional Standard - Electricity, quantitative real-time quantitative

DL 434-1991 Regulations for implementing the legal units of measure in power plant water chemistry

Sichuan Provincial Standard of the People's Republic of China, quantitative real-time quantitative

DB51/T 2156-2016 Guidance for the evaluation and application of measurement uncertainty in chemical analysis laboratories

Professional Standard - Medicine, quantitative real-time quantitative

YY/T 1304.2-2015 Detection system of time-resolved fluoroimmunoassay.Part 2:Quantitative reagent (kit) for time-resolved fluoroimmunoassay

BR-ABNT, quantitative real-time quantitative

ABNT NBR 14005 Versão Corrigida-1997 Velocity water-meter for cold water with nominal flow rate 15 m³/h until 1 500 m³/h

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, quantitative real-time quantitative

ITU-T O.171-1992 Timing Jitter Measuring Equipment for Digital Systems - Specifications for Measuring Equipment (Study Group IV; 13 pp)

Lithuanian Standards Office , quantitative real-time quantitative

LST EN ISO 11771:2011 Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010)

National Aeronautics and Space Administration (NASA), quantitative real-time quantitative

NASA-TM-X-71903-1976 A theoretical study of the acoustic impedance of orifices in the presence of a steady grazing flow

Jiangsu Provincial Standard of the People's Republic of China, quantitative real-time quantitative

DB32/T 4368-2022 Determination of Zearalenone in Feed by Time-Resolved Fluorescence Immunochromatographic Quantitative Method

国家卫生计生委, quantitative real-time quantitative

WS/T 493-2017 Guidelines for Evaluating Measurement Uncertainty of Reference Methods in Enzymology Reference Laboratories

Professional Standard - China Metal Association, quantitative real-time quantitative

CSM 01 01 01 07-2006 Specification for Uncertainty Evaluation of Measurement Result of Determination of Carbon Quantity by Gas Volumetric Method
CSM 01010107-2006 Specification for Uncertainty Evaluation of Measurement Result of Determination of Carbon Quantity by Gas Volumetric Method

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, quantitative real-time quantitative

ITU-R TF.538-2-1992 Frequency and Time (Phase) Instability Measures Section 7D - Characterization of Sources and Time Scales Formation

Professional Standard - Construction Machinery, quantitative real-time quantitative

JJ 60-1987 Experimental method of actuation time of measuring unit of earth moving machines

ES-UNE, quantitative real-time quantitative

UNE-EN ISO 11274:2019 Soil quality - Determination of the water-retention characteristic - Laboratory methods (ISO 11274:2019) (Endorsed by Asociación Española de Normalización in November of 2019.)