ZH
RU
ES

transient spectroscopy

transient spectroscopy, Total:197 items.

In the international standard classification, transient spectroscopy involves: Fibre optic communications, Electronic display devices, Rubber, Tyres, Internal combustion engines, Semiconductor devices, Nuclear energy engineering, Semiconducting materials, Transformers. Reactors, Passenger cars. Caravans and light trailers, Linear and angular measurements, Road vehicles in general, Integrated circuits. Microelectronics, Astronomy. Geodesy. Geography, Metrology and measurement in general, Power transmission and distribution networks, Vibrations, shock and vibration measurements, Plastics, Particle size analysis. Sieving, Soil quality. Pedology, Commercial vehicles, Environmental protection, Wastes, Electricity. Magnetism. Electrical and magnetic measurements, Electromagnetic compatibility (EMC), Optoelectronics. Laser equipment, Electrical accessories, Inorganic chemicals, Fertilizers, Air quality, Road vehicle systems, Aircraft and space vehicles in general, Analytical chemistry, Installations in buildings, Products of the textile industry, Woodworking equipment, Geology. Meteorology. Hydrology, Water quality, Thermodynamics and temperature measurements.

German Institute for Standardization, transient spectroscopy

DIN EN 61290-4-2:2012 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method (IEC 61290-4-2:2011); German version EN 61290-4-2:2011
DIN EN 61290-4-1:2017-06 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method (IEC 61290-4-1:2016); German version EN 61290-4-1:2016 / Note: DIN EN 61290-4-1 (2012-04) remains valid alongside this standard until 2019-10-31.
DIN EN 61290-4-2:2012-04 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method (IEC 61290-4-2:2011); German version EN 61290-4-2:2011 / Note: Applies in conjunction with DIN EN 61291-1 (2007-06).
DIN EN IEC 61290-4-3:2019-12 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control (IEC 61290-4-3:2018); German version EN IEC 61290-4-3:2018 / Note: DIN EN 61290-4-3 (2016-06) remains valid alongside t...
DIN EN IEC 61290-4-4:2019-04 Optical amplifiers - Test methods - Part 4-4: Gain transient parameters - Single channel optical amplifiers with gain control (IEC 61290-4-4:2018); German version EN IEC 61290-4-4:2018
DIN EN 61290-4-1:2012 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method (IEC 61290-4-1:2011); German version EN 61290-4-1:2011
DIN EN 61290-4-1:2017 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method (IEC 61290-4-1:2016); German version EN 61290-4-1:2016
DIN EN ISO 22007-2:2022-09 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2022); German version EN ISO 22007-2:2022
DIN EN 61290-4-3:2016 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control (IEC 61290-4-3:2015); German version EN 61290-4-3:2015

National Metrological Technical Specifications of the People's Republic of China, transient spectroscopy

JJF 1329-2011 Calibration Specification for Instantaneous Spectral Instruments
JJF 1330-2011 Calibration Specification for Instantaneous Effective Intensity Testers
JJF 1385-2012 Calibration Specification for Flow Analyzer for Short Tranient Loaded Mode of Casoline Vehicles

British Standards Institution (BSI), transient spectroscopy

BS EN 61290-4-2:2011 Optical amplifiers. Test methods. Gain transient parameters. Broadband source method
BS EN 61290-4-1:2011 Optical amplifiers. Test methods. Gain transient parameters. Two-wavelength method
BS EN 61290-4-1:2016 Optical amplifiers. Test methods. Gain transient parameters. Two-wavelength method
BS EN IEC 61290-4-4:2018 Optical amplifiers. Test methods - Gain transient parameters. Single channel optical amplifiers with gain control
BS EN IEC 61290-4-3:2018 Optical amplifiers. Test methods - Power transient parameters. Single channel optical amplifiers in output power control
BS ISO 7401:2011 Road vehicles. Lateral transient response test methods. Open-loop test methods
BS 6662:1985 Guide to methods of measurement of short duration transients on low voltage power and signal lines
DD IEC/TS 62215-2:2007 Integrated circuits. Measurement of impulse immunity - Synchronous transient injection method
BS 6955-18:1994 Calibration of vibration and shock pick-ups. Method of test for transient temperature sensitivity
BS ISO 14793:2011 Road vehicles. Heavy commercial vehicles and buses. Lateral transient response test methods
BS ISO 22140:2021 Passenger cars. Validation of vehicle dynamics simulation. Lateral transient response test methods
BS EN ISO 22007-2:2022 Plastics. Determination of thermal conductivity and thermal diffusivity - Transient plane heat source (hot disc) method
21/30427387 DC BS EN ISO 22007-2. Plastics. Determination of thermal conductivity and thermal diffusivity. Part 2. Transient plane heat source (hot disc) method
20/30383725 DC BS ISO 22140. Passenger cars. Validation of vehicle dynamics simulation. Lateral transient response test methods

国家市场监督管理总局、中国国家标准化管理委员会, transient spectroscopy

GB/T 38621-2020 Transient thermal test method for light emitting diode modules
GB/T 29022-2021 Particle size analysis—Dynamic light scattering (DLS)

Association Francaise de Normalisation, transient spectroscopy

NF C93-805-4-1:2011 Optical amplifiers - Test methods - Part 4-1 : gain transient parameters - Two-wavelength method.
NF C93-805-4-2*NF EN 61290-4-2:2011 Optical amplifiers - Test methods - Part 4-2 : gain transient parameters - Broadband source method
NF C93-805-4-1*NF EN 61290-4-1:2017 Optical amplifiers - Test methods - Part 4-1 : gain transient parameters - Two-wavelength method
NF EN 61290-4-1:2017 Amplificateurs optiques - Méthodes d'essai - Partie 4-1 : paramètres de gain transitoire - Méthode à deux longueurs d'onde
NF EN 61290-4-2:2011 Amplificateurs optiques - Méthodes d'essai - Partie 4-2 : paramètres de gain transitoire - Méthode par source large bande
NF EN IEC 61290-4-4:2018 Amplificateurs optiques - Méthodes d'essai Partie 4-4 : paramètres de gain transitoire - Amplificateurs optiques monocanaux avec commande de gain
NF C93-805-4-4*NF EN IEC 61290-4-4:2018 Optical amplifiers - Test methods - Part 4-4 : gain transient parameters - Single channel optical amplifiers with gain control
NF EN IEC 61290-4-3:2018 Amplificateurs optiques - Méthodes d'essai - Partie 4-3 : paramètres de puissance transitoire - Amplificateurs optiques monocanaux commandés par la puissance de sortie
NF C93-805-4-3*NF EN IEC 61290-4-3:2018 Optical amplifiers - Test methods - Part 4-3 : power transient parameters - Single channel optical amplifiers in output power control
NF R10-031*NF ISO 7401:2004 Road vehicles - Lateral transient response test methods - Open-loop test methods
NF ISO 7401:2004 Véhicules routiers - Méthodes d'essai de réponse transitoire latérale - Méthode d'essai en boucle ouverte
NF EN 61300-3-28:2012 Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 3-28 : examens et mesures - Perte transitoire
NF EN 62215-3:2014 Circuits intégrés - Mesure de l'immunité aux impulsions - Partie 3 : méthode d'injection de transitoires non synchrones
NF EN ISO 22007-2:2022 Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique - Partie 2 : Méthode de la source plane transitoire (disque chaud)
E90-350-18:1994 Methods for the calibration of vibration and shock pick-ups. Part 18 : testing of transient temperature sensitivity.
NF ETS 300050:1994 Méthodes pour l'étalonnage de capteurs de vibrations et de chocs - Partie 18 : essai de sensibilité de température transitoire.
NF EN 2591-209:1994 Méthodes pour l'étalonnage de capteurs de vibrations et de chocs - Partie 18 : essai de sensibilité de température transitoire.
NF S10-121:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics.
NF C42-544-6:2001 Instrument transformers - Part 6 : requirements for protective current transformers for transient performance.
NF EN 60255-24:2001 Relais électriques - Partie 24 : format commun pour l'échange de données transitoires (COMTRADE) dans les réseaux électriques
NF E37-211-4*NF ISO 8178-4:2020 Reciprocating internal combustion engines - Exhaust emission measurement - Part 4 : steady-state and transient test cycles for different engine applications
NF ISO 8178-4:2020 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 4 : cycles d'essai en régimes permanent et transitoire pour différentes applications des moteurs
NF EN 62374-1:2011 Dispositifs à semiconducteurs - Partie 1 : essai de rupture diélectrique en fonction du temps (TDDB) pour les couches intermétalliques

Danish Standards Foundation, transient spectroscopy

DS/EN 61290-4-1:2011 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
DS/EN 61290-4-2:2011 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method
DS/EN ISO 22007-2:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method
DS/EN 61300-3-28:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss
DS/EN 60044-6:2000 Instrument transformers - Part 6: Requirements for protective current transformers for transient performance
DS/EN 60255-24:2002 Electrical relays - Part 24: Common format for transient data exchange (COMTRADE) for power systems
DS/IEC 61000-4-33:2007 Electromagnetic compatibility (EMC) - Part 4-33: Testing and measurement techniques - Measurement methods for high-power transient parameters

Society of Automotive Engineers (SAE), transient spectroscopy

SAE AIR817-2002 A TECHNIQUE FOR NARROW BAND ANALYSIS OF A TRANSIENT
SAE AIR1823-2011 ENVIRONMENTAL CONTROL SYSTEM TRANSIENT ANALYSIS COMPUTER PROGRAM (EASY)

SAE - SAE International, transient spectroscopy

SAE AIR817-1967 A TECHNIQUE FOR NARROW BAND ANALYSIS OF A TRANSIENT
SAE J1113-42-2000 Electromagnetic CompatibilityComponent Test Procedure Part 42Conducted Transient Emissions
SAE J1113-42-2010 Electromagnetic Susceptibility Test Procedures for Vehicle Components (Except Aircraft)
SAE J1113-42-2006 Electromagnetic CompatibilityComponent Test Procedure Part 42Conducted Transient Emissions

International Electrotechnical Commission (IEC), transient spectroscopy

IEC 61290-4-1:2016 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
IEC 61290-4-1:2011 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
IEC 61290-4-4:2018 Optical amplifiers - Test methods - Part 4-4: Gain transient parameters - Single channel optical amplifiers with gain control
IEC 61290-4-3:2015 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
IEC 61290-4-3:2018 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
IEC TR2 60816:1984 Guide on methods of measurement of short duration transients on low voltage power and signal lines.
IEC 61000-4-33:2005 Electromagnetic compatibility (EMC) - Part 4-33: Testing and measurement techniques - Measurement methods for high-power transient parameters
IEC 60255-24:2001 Electrical relays - Part 24: Common format for transient data exchange (COMTRADE) for power systems
IEC 63159-2-1:2021 Household electric instantaneous water heaters - Methods for measuring the performance - Part 2-1: Multifunctional electric instantaneous water heaters

European Committee for Electrotechnical Standardization（CENELEC）, transient spectroscopy

EN 61290-4-1:2011 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
EN 61290-4-2:2011 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method
EN 61290-4-1:2016 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
EN IEC 61290-4-3:2018 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
EN 62215-3:2013 Integrated circuits - Measurement of impulse immunity - Part 3: Non-synchronous transient injection method
EN 61300-3-28:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss

ES-UNE, transient spectroscopy

UNE-EN 61290-4-2:2011 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method (Endorsed by AENOR in January of 2012.)
UNE-EN 61290-4-1:2016 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method (Endorsed by Asociación Española de Normalización in February of 2017.)
UNE-EN IEC 61290-4-4:2018 Optical amplifiers - Test methods - Part 4-4: Gain transient parameters - Single channel optical amplifiers with gain control (Endorsed by Asociación Española de Normalización in November of 2018.)
UNE-EN IEC 61290-4-3:2018 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control (Endorsed by Asociación Española de Normalización in August of 2018.)
UNE-EN 62215-3:2013 Integrated circuits - Measurement of impulse immunity - Part 3: Non-synchronous transient injection method (Endorsed by AENOR in November of 2013.)
UNE-EN ISO 22007-2:2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2022)
UNE-EN 60255-24:2001 Electrical relays -- Part 24: Common format for transient data exchange (COMTRADE) for power systems. (Endorsed by AENOR in August of 2001.)

Lithuanian Standards Office , transient spectroscopy

LST EN 61290-4-2-2011 Optical amplifiers - Test methods -- Part 4-2: Gain transient parameters - Broadband source method (IEC 61290-4-2:2011)
LST EN 61290-4-1-2011 Optical amplifiers - Test methods -- Part 4-1: Gain transient parameters - Two-wavelength method (IEC 61290-4-1:2011)
LST EN ISO 22007-2:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2008)
LST EN 61300-3-28-2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-28: Examinations and measurements - Transient loss (IEC 61300-3-28:2012)

Professional Standard - Aviation, transient spectroscopy

HB 5400-1988 Rubber thermal conductivity test method transient hot wire method
HB 6455-1990 A method for expressing the transient performance of an aero turbine engine with a digital computer program
HB 6167.24-2014 Environmental conditions and test procedures for airborne equipment of civil airplane.Part 24: Lightning induced transient susceptibility test

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, transient spectroscopy

GB/T 11205-1989 Rubber--Determination of thermal conductivity by means of transient hot-wire method
GB/T 43034.3-2023 Integrated circuit pulse immunity measurements Part 3: Asynchronous transient injection method
GB/Z 17626.33-2023 Electromagnetic Compatibility Testing and Measurement Techniques Part 33: Measurement Methods of High Power Transient Parameters
GB/T 29022-2012 Particle size analysis.Dynamic light scattering (DLS)
GB/T 32737-2016 Determination of nitrate nitrogen in soil - Ultraviolet spectrophotometry method
GB/T 32064-2015 Test method for thermal conductivity and thermal diffusivity of building materials with transient plane heat source
GB/T 8190.4-2023 Measurement of emissions from reciprocating internal combustion engines - Part 4: Steady-state and transient test cycles for engines of different uses
GB/T 6323.2-1994 Controllability and stability test procedure for automobiles- Steering transient response test (Steering wheel angle step input)
GB/T 6323.3-1994 Controllability and stability test procedure for automobiles-Steering transient response test (Steering wheel angle pulse input)

Japanese Industrial Standards Committee (JISC), transient spectroscopy

JIS C 6122-4-2:2013 Optical amplifiers -- Test methods -- Part 4-2: Transient parameters -- Measurement of gain parameters using broadband source method
JIS C 6122-4-1:2013 Optical amplifiers.Test methods.Part 4-1: Transient parameters.Measurement of gain parameters using two-wavelength method
JIS C 6122-4-3:2018 Optical amplifiers -- Test methods -- Part 4-3: Power transient parameters -- Single channel optical amplifiers in output power control
JIS C 61300-3-28:2009 Fiber optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-28: Examinations and measurements -- Transient loss
JIS B 8008-4:2023 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 4: Steady-state and transient test cycles for different engine applications

SE-SIS, transient spectroscopy

SIS SS-ISO 7401:1989 Road vehicles — Lateral transient response test methods

Group Standards of the People's Republic of China, transient spectroscopy

T/CSAE 271-2022 General test method for transient lateral slip property of tyres
T/CSAE 272-2022 General test method for transient longitudinal slip property of tyres
T/CAMS /CICEIA168-2023 test method of transient response ability for turbocharger
T/CSAE 273-2022 General test method for transient state combined slip property of tyres
T/CSAE 288-2022 Test methods and requirements for transient phenomenon of power supply port of 60 V～1000 V components of electric vehicles

CENELEC - European Committee for Electrotechnical Standardization, transient spectroscopy

EN IEC 61290-4-4:2018 Optical amplifiers - Test methods - Part 4-4: Gain transient parameters - Single channel optical amplifiers with gain control
EN 61290-4-3:2015 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
EN 61300-3-28:2002 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-28: Examinations and Measurements Transient Loss
EN 60044-6:1999 Instrument Transformers Part 6: Requirements for Protective Current Transformers for Transient Performance

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., transient spectroscopy

ASHRAE 4591-2002 Transient Analysis of Snow-Melting System Performance (RP-1090)
ASHRAE QC-06-016-2006 An Integrated Zonal Model to Predict Transient Indoor Humidity Distribution
ASHRAE 4418-2001 Prediction of Skin and Clothing Temperatures Under Thermal Transient Considering Moisture Accumulation in Clothing

Guizhou Provincial Standard of the People's Republic of China, transient spectroscopy

DB52/T 1104-2016 Transient test method for junction-case thermal resistance of semiconductor devices

Professional Standard - Nuclear Industry, transient spectroscopy

EJ/T 924-1995 Transient Analysis of Light Water Reactor Compartment Pressure and Temperature
EJ/T 1013-1996 Transient Analysis of Light Water Reactor Containment Pressure and Temperature
EJ/T 779-1993 Predicted transient analysis requirements for PWR nuclear power plants that fail to emergency shut down

ANS - American Nuclear Society, transient spectroscopy

56.10-1982 Subcompartment Pressure and Temperature Transient Analysis in Light Water Reactors
56.4-1983 Pressure and Temperature Transient Analysis for Light Water Reactor Containments

Professional Standard - Electron, transient spectroscopy

SJ/T 10482-1994 Test method for characterizing semiconductor deep levels by transient capacitance techniques
SJ 50033/133-1997 Semiconductor discrete devices.Detail specification for type SY5629～5665A tramsient voltage suppression diodes

American National Standards Institute （ANSI), transient spectroscopy

ANSI/IEEE C57.12.58:1991 Guide for Conducting a Transient Voltage Analysis of a Dry-Type Transformer Coil

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., transient spectroscopy

IEEE C57.12.58-1991 Guide for Conducting a Transient Voltage Analysis of a Dry-Type Transformer Coil

Korean Agency for Technology and Standards (KATS), transient spectroscopy

KS R 3959-2018 Passenger cars — Validation of vehicle dynamic simulation — Lateral transient response test methods
KS R ISO 7401-2014(2019) Road vehicles — Lateral transient response test methods — Open-loop test methods
KS R ISO 7401:2008 Road vehicles-Lateral transient response test methods-Open-loop test methods
KS R ISO 7401:2014 Road vehicles — Lateral transient response test methods — Open-loop test methods
KS B ISO 5347-18-2014(2019) Methods for the calibration of vibration and shock pick-ups — Part 18: Testing of transient temperature sensitivity
KS R ISO 8725:2008 Road vehicles－Transient open-loop response test method with one period of sinusoidal input
KS R ISO 8725-2008(2013) Road vehicles－Transient open-loop response test method with one period of sinusoidal input
KS R ISO 8726-2008(2013) Road vehicles－Transient open-loop response test method with pseudo-random steering input
KS R ISO 8726:2008 Road vehicles－Transient open-loop response test method with pseudo-random steering input
KS R ISO 14793-2015(2020) Road vehicles－Heavy commercial vehicles and buses－Lateral transient response test methods
KS C IEC 61000-4-33-2012(2017) Electromagnetic compatibility(EMC)－Part 4-33：Testing and measurement techniques－Measurement methods for high-power transient parameters
KS C IEC 61300-3-28:2020 Fibre optic interconnecting devices and passive components — Basic test and measurement procedures — Part 3-28: Examinations and measurements — Transient loss
KS C IEC 61300-3-28:2014 Fibre optic interconnecting devices and passive components — Basic test and measurement procedures — Part 3-28: Examinations and measurements — Transient loss
KS C IEC 61000-4-33:2021 Electromagnetic compatibility(EMC) — Part 4-33: Testing and measurement techniques — Measurement methods for high-power transient parameters

KR-KS, transient spectroscopy

KS R 3959-2018(2023) Passenger cars — Validation of vehicle dynamic simulation — Lateral transient response test methods
KS R ISO 22140-2023 Passenger cars — Validation of vehicle dynamic simulation — Lateral transient response test methods
KS C IEC 61300-3-28-2020 Fibre optic interconnecting devices and passive components — Basic test and measurement procedures — Part 3-28: Examinations and measurements — Transient loss
KS C IEC 61000-4-33-2021 Electromagnetic compatibility(EMC) — Part 4-33: Testing and measurement techniques — Measurement methods for high-power transient parameters

Institute of Interconnecting and Packaging Electronic Circuits (IPC), transient spectroscopy

IPC TM-650 2.5.33.2-1998 Measurement of Electrical Overstress from Soldering Hand Tools - Transient Measurements

RU-GOST R, transient spectroscopy

GOST 25645.153-1990 Earth atmosphere diffused radiation. Model of spatial-time distribution
GOST 34374.2-2017 Plastics. Determination of thermal conductivity and thermal diffusivity. Part 2. Transient plane heat source (hot disc) method

Institute of Electrical and Electronics Engineers (IEEE), transient spectroscopy

IEEE Std C57.12.58-1991 IEEE Guide for Conducting a Transient Voltage Analysis of a Dry-Type Transformer Coil
IEEE Std C57.12.58-2017 IEEE Guide for Conducting a Transient Voltage Analysis of a Dry-Type Transformer Coil
IEEE PC57.12.58/D1.4, July 2016 IEEE Approved Draft Guide for Conducting a Transient Voltage Analysis of a Dry-Type Transformer Coil
IEEE PC57.12.58/D2, December 2016 IEEE Approved Draft Guide for Conducting a Transient Voltage Analysis of a Dry-Type Transformer Coil

Professional Standard - Energy, transient spectroscopy

NB/T 20403-2017RK Transient analysis of pressure and temperature in pressurized water reactor nuclear power plant compartment
NB/T 20404-2017RK Transient Analysis of Containment Pressure and Temperature in PWR Nuclear Power Plant
NB/T 20104-2012 Analysis requirement for anticipated transient without scram on pressurized water reactor nuclear power plants

国家能源局, transient spectroscopy

NB/T 20403-2017 Transient analysis of pressure and temperature in compartments of pressurized water reactor nuclear power plants
NB/T 20404-2017 Transient analysis of pressure and temperature of containment of pressurized water reactor nuclear power plant

International Organization for Standardization (ISO), transient spectroscopy

ISO 7401:2011 Road vehicles - Lateral transient response test methods - Open-loop test methods
ISO 7401:2003 Road vehicles - Lateral transient response tests methods - Open-loop test methods
ISO 22007-2:2022 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method
ISO 14793:2003 Road vehicles - Heavy commercial vehicles and buses - Lateral transient response test methods
ISO 22140:2021 Passenger cars - Validation of vehicle dynamics simulation - Lateral transient response test methods
ISO/TR 8725:1988 Road vehicles; transient open-loop response test method with one period of sinusoidal input
ISO 2991:1974 Nitric acid for industrial use; Determination of ammoniacal nitrogen content; Spectrophotometric method
ISO/TR 8726:1988 Road vehicles; transient open-loop response test method with pseudo-random steering input
ISO 8178-4:2017 Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Steady-state and transient test cycles for different engine applications
ISO 8178-4:2020 Reciprocating internal combustion engines — Exhaust emission measurement — Part 4: Steady-state and transient test cycles for different engine applications

Sichuan Provincial Standard of the People's Republic of China, transient spectroscopy

DB51/T 2434-2017 Transient Measurement of Material Thermal Conductivity and Thermal Diffusivity—Pulse Method

IEC - International Electrotechnical Commission, transient spectroscopy

TS 62215-2-2007 Integrated circuits – Measurement of impulse immunity – Part 2: Synchronous transient injection method (Edition 1.0)

American Society for Testing and Materials (ASTM), transient spectroscopy

ASTM F978-90(1996)e1 Standard Test Method for Characterizing Semiconductor Deep Levels by Transient Capacitance Techniques
ASTM D7984-21 Standard Test Method for Measurement of Thermal Effusivity of Fabrics Using a Modified Transient Plane Source (MTPS) Instrument
ASTM D7984-16 Standard Test Method for Measurement of Thermal Effusivity of Fabrics Using a Modified Transient Plane Source (MTPS) Instrument
ASTM E598-08(2020) Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter

未注明发布机构, transient spectroscopy

BS EN 60044-6:1999 Instrument transformers — Part 6 : Requirements for protective current transformers for transient performance

Professional Standard - Environmental Protection, transient spectroscopy

HJ/T 290-2006 Equipment specifications and quality control requirements for gasoline vehicles exhaust emission test in short transient loaded mode
HJ/T 396-2007 Equipment Specifications and Quality Control Requirements for In-use Vehicles with Ignition Engine Exhaust Emission Test in Transient Loaded Mode

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, transient spectroscopy

JEDEC JESD51-14-2010 Transient Dual Interface Test Method for the Measurement of the Thermal Resistance Junction to Case of Semiconductor Devices with Heat Flow Trough a Single Path

AENOR, transient spectroscopy

UNE-EN 61300-3-28:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss

YU-JUS, transient spectroscopy

JUS H.B8.637-1981 Sulphuric acid for industrial use. Determination of ammoniacal nitrogen content. Spectrophotometric method

TR-TSE, transient spectroscopy

TS 2466-1976 Nitric Acit For Industrial Use Determination of Ammoniacal Nitrogen Content Spectrophotoraetric Method

BE-NBN, transient spectroscopy

NBN T 03-041-1979 Nitric acid for industrial use - Determination of ammoniacal nitrogen content - Spectrophotometric method

Professional Standard - Agriculture, transient spectroscopy

NY/T 1116-2006 Fertilizers-Determination of nitrate nitrogen content.UItraviolet spectro-photometric method

European Committee for Standardization (CEN), transient spectroscopy

EN ISO 22007-2:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2015)
prEN ISO 22007-2:2021 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO/DIS 22007-2:2021)

Hebei Provincial Standard of the People's Republic of China, transient spectroscopy

DB13/T 2499.3-2017 Determination methods for liquid mixtures: Part 3: Determination of total phosphorus (ammonium molybdate spectrophotometric method)

Taiwan Provincial Standard of the People's Republic of China, transient spectroscopy

CNS 10786-1984 Test Code for Performance of Drum Sanders
CNS 10787-1998 Test code for performance of wide belt sanders
CNS 10789-1995 Test Code for Performance of Scrapers

AT-ON, transient spectroscopy

OENORM EN ISO 22007-2:2021 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO/DIS 22007-2:2021)

Professional Standard - Ocean, transient spectroscopy

HY/T 152-2013 Speciation of trivalent arsenic and pentavalent arsenic in sea water by atomic fluorescence spectroscopy

Jiangxi Provincial Standard of the People's Republic of China, transient spectroscopy

DB36/ 617-2011 Limits of Exhaust Pollutant Emissions for Light Vehicles with Ignition Engines in Simple Transient Conditions

Shanghai Provincial Standard of the People's Republic of China, transient spectroscopy

DB31/ 357-2015 Limits of Exhaust Pollutant Emissions for Light Vehicles with Ignition Engines in Simple Transient Conditions

Xinjiang Provincial Standard of the People's Republic of China, transient spectroscopy

DB65/T 2880-2008 Limits for exhaust pollutants from in-use light-duty vehicle equipped ignition engine under simple transient driving mode conditions

Fujian Provincial Standard of the People's Republic of China, transient spectroscopy

DB35/ 1300-2012 Limits of Exhaust Pollutant Emissions for Light Vehicles with Ignition Engines in Simple Transient Conditions