ZH
RU
ES

transient light method

transient light method, Total:137 items.

In the international standard classification, transient light method involves: Fibre optic communications, Electronic display devices, Rubber, Tyres, Internal combustion engines, Semiconductor devices, Semiconducting materials, Passenger cars. Caravans and light trailers, Linear and angular measurements, Road vehicles in general, Metrology and measurement in general, Power transmission and distribution networks, Integrated circuits. Microelectronics, Commercial vehicles, Vibrations, shock and vibration measurements, Environmental protection, Wastes, Plastics, Optoelectronics. Laser equipment, Air quality, Road vehicle systems, Products of the textile industry, Woodworking equipment, Thermodynamics and temperature measurements, Soil quality. Pedology, Particle size analysis. Sieving.

British Standards Institution (BSI), transient light method

BS EN 61290-4-2:2011 Optical amplifiers. Test methods. Gain transient parameters. Broadband source method
BS EN 61290-4-1:2011 Optical amplifiers. Test methods. Gain transient parameters. Two-wavelength method
BS EN 61290-4-1:2016 Optical amplifiers. Test methods. Gain transient parameters. Two-wavelength method
BS EN IEC 61290-4-4:2018 Optical amplifiers. Test methods - Gain transient parameters. Single channel optical amplifiers with gain control
BS EN IEC 61290-4-3:2018 Optical amplifiers. Test methods - Power transient parameters. Single channel optical amplifiers in output power control
BS ISO 7401:2011 Road vehicles. Lateral transient response test methods. Open-loop test methods
BS 6662:1985 Guide to methods of measurement of short duration transients on low voltage power and signal lines
DD IEC/TS 62215-2:2007 Integrated circuits. Measurement of impulse immunity - Synchronous transient injection method
BS 6955-18:1994 Calibration of vibration and shock pick-ups. Method of test for transient temperature sensitivity
BS ISO 14793:2011 Road vehicles. Heavy commercial vehicles and buses. Lateral transient response test methods
BS ISO 22140:2021 Passenger cars. Validation of vehicle dynamics simulation. Lateral transient response test methods
BS EN ISO 22007-2:2022 Plastics. Determination of thermal conductivity and thermal diffusivity - Transient plane heat source (hot disc) method
20/30383725 DC BS ISO 22140. Passenger cars. Validation of vehicle dynamics simulation. Lateral transient response test methods

German Institute for Standardization, transient light method

DIN EN 61290-4-2:2012 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method (IEC 61290-4-2:2011); German version EN 61290-4-2:2011
DIN EN 61290-4-1:2017-06 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method (IEC 61290-4-1:2016); German version EN 61290-4-1:2016 / Note: DIN EN 61290-4-1 (2012-04) remains valid alongside this standard until 2019-10-31.
DIN EN 61290-4-2:2012-04 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method (IEC 61290-4-2:2011); German version EN 61290-4-2:2011 / Note: Applies in conjunction with DIN EN 61291-1 (2007-06).
DIN EN IEC 61290-4-3:2019-12 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control (IEC 61290-4-3:2018); German version EN IEC 61290-4-3:2018 / Note: DIN EN 61290-4-3 (2016-06) remains valid alongside t...
DIN EN IEC 61290-4-4:2019-04 Optical amplifiers - Test methods - Part 4-4: Gain transient parameters - Single channel optical amplifiers with gain control (IEC 61290-4-4:2018); German version EN IEC 61290-4-4:2018
DIN EN 61290-4-1:2012 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method (IEC 61290-4-1:2011); German version EN 61290-4-1:2011
DIN EN 61290-4-1:2017 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method (IEC 61290-4-1:2016); German version EN 61290-4-1:2016
DIN EN ISO 22007-2:2022-09 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2022); German version EN ISO 22007-2:2022
DIN EN 61290-4-3:2016 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control (IEC 61290-4-3:2015); German version EN 61290-4-3:2015

National Metrological Technical Specifications of the People's Republic of China, transient light method

JJF 1329-2011 Calibration Specification for Instantaneous Spectral Instruments
JJF 1330-2011 Calibration Specification for Instantaneous Effective Intensity Testers
JJF 1385-2012 Calibration Specification for Flow Analyzer for Short Tranient Loaded Mode of Casoline Vehicles

国家市场监督管理总局、中国国家标准化管理委员会, transient light method

GB/T 38621-2020 Transient thermal test method for light emitting diode modules
GB/T 29022-2021 Particle size analysis—Dynamic light scattering (DLS)

Association Francaise de Normalisation, transient light method

NF C93-805-4-1:2011 Optical amplifiers - Test methods - Part 4-1 : gain transient parameters - Two-wavelength method.
NF C93-805-4-2*NF EN 61290-4-2:2011 Optical amplifiers - Test methods - Part 4-2 : gain transient parameters - Broadband source method
NF C93-805-4-1*NF EN 61290-4-1:2017 Optical amplifiers - Test methods - Part 4-1 : gain transient parameters - Two-wavelength method
NF EN 61290-4-1:2017 Amplificateurs optiques - Méthodes d'essai - Partie 4-1 : paramètres de gain transitoire - Méthode à deux longueurs d'onde
NF EN 61290-4-2:2011 Amplificateurs optiques - Méthodes d'essai - Partie 4-2 : paramètres de gain transitoire - Méthode par source large bande
NF EN IEC 61290-4-4:2018 Amplificateurs optiques - Méthodes d'essai Partie 4-4 : paramètres de gain transitoire - Amplificateurs optiques monocanaux avec commande de gain
NF C93-805-4-4*NF EN IEC 61290-4-4:2018 Optical amplifiers - Test methods - Part 4-4 : gain transient parameters - Single channel optical amplifiers with gain control
NF EN IEC 61290-4-3:2018 Amplificateurs optiques - Méthodes d'essai - Partie 4-3 : paramètres de puissance transitoire - Amplificateurs optiques monocanaux commandés par la puissance de sortie
NF R10-031*NF ISO 7401:2004 Road vehicles - Lateral transient response test methods - Open-loop test methods
NF ISO 7401:2004 Véhicules routiers - Méthodes d'essai de réponse transitoire latérale - Méthode d'essai en boucle ouverte
NF C93-805-4-3*NF EN IEC 61290-4-3:2018 Optical amplifiers - Test methods - Part 4-3 : power transient parameters - Single channel optical amplifiers in output power control
NF EN 61300-3-28:2012 Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 3-28 : examens et mesures - Perte transitoire
NF S10-121:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics.
NF EN 62215-3:2014 Circuits intégrés - Mesure de l'immunité aux impulsions - Partie 3 : méthode d'injection de transitoires non synchrones
NF EN ISO 22007-2:2022 Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique - Partie 2 : Méthode de la source plane transitoire (disque chaud)
E90-350-18:1994 Methods for the calibration of vibration and shock pick-ups. Part 18 : testing of transient temperature sensitivity.
NF ETS 300050:1994 Méthodes pour l'étalonnage de capteurs de vibrations et de chocs - Partie 18 : essai de sensibilité de température transitoire.
NF EN 2591-209:1994 Méthodes pour l'étalonnage de capteurs de vibrations et de chocs - Partie 18 : essai de sensibilité de température transitoire.

Danish Standards Foundation, transient light method

DS/EN 61290-4-1:2011 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
DS/EN 61290-4-2:2011 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method
DS/EN ISO 22007-2:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method
DS/EN 61300-3-28:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss

Professional Standard - Aviation, transient light method

HB 5400-1988 Rubber thermal conductivity test method transient hot wire method
HB 6455-1990 A method for expressing the transient performance of an aero turbine engine with a digital computer program

International Electrotechnical Commission (IEC), transient light method

IEC 61290-4-1:2016 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
IEC 61290-4-1:2011 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
IEC 61290-4-4:2018 Optical amplifiers - Test methods - Part 4-4: Gain transient parameters - Single channel optical amplifiers with gain control
IEC 61290-4-3:2015 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
IEC 61290-4-3:2018 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
IEC TR2 60816:1984 Guide on methods of measurement of short duration transients on low voltage power and signal lines.

European Committee for Electrotechnical Standardization（CENELEC）, transient light method

EN 61290-4-1:2011 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
EN 61290-4-2:2011 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method
EN 61290-4-1:2016 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
EN IEC 61290-4-3:2018 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
EN 62215-3:2013 Integrated circuits - Measurement of impulse immunity - Part 3: Non-synchronous transient injection method
EN 61300-3-28:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss

ES-UNE, transient light method

UNE-EN 61290-4-2:2011 Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method (Endorsed by AENOR in January of 2012.)
UNE-EN 61290-4-1:2016 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method (Endorsed by Asociación Española de Normalización in February of 2017.)
UNE-EN IEC 61290-4-4:2018 Optical amplifiers - Test methods - Part 4-4: Gain transient parameters - Single channel optical amplifiers with gain control (Endorsed by Asociación Española de Normalización in November of 2018.)
UNE-EN IEC 61290-4-3:2018 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control (Endorsed by Asociación Española de Normalización in August of 2018.)
UNE-EN 62215-3:2013 Integrated circuits - Measurement of impulse immunity - Part 3: Non-synchronous transient injection method (Endorsed by AENOR in November of 2013.)
UNE-EN ISO 22007-2:2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2022)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, transient light method

GB/T 11205-1989 Rubber--Determination of thermal conductivity by means of transient hot-wire method
GB/T 43034.3-2023 Integrated circuit pulse immunity measurements Part 3: Asynchronous transient injection method
GB/T 32064-2015 Test method for thermal conductivity and thermal diffusivity of building materials with transient plane heat source
GB/Z 17626.33-2023 Electromagnetic Compatibility Testing and Measurement Techniques Part 33: Measurement Methods of High Power Transient Parameters
GB/T 6323.2-1994 Controllability and stability test procedure for automobiles- Steering transient response test (Steering wheel angle step input)
GB/T 6323.3-1994 Controllability and stability test procedure for automobiles-Steering transient response test (Steering wheel angle pulse input)
GB/T 32737-2016 Determination of nitrate nitrogen in soil - Ultraviolet spectrophotometry method
GB/T 29022-2012 Particle size analysis.Dynamic light scattering (DLS)

SE-SIS, transient light method

SIS SS-ISO 7401:1989 Road vehicles — Lateral transient response test methods

Group Standards of the People's Republic of China, transient light method

T/CSAE 271-2022 General test method for transient lateral slip property of tyres
T/CSAE 272-2022 General test method for transient longitudinal slip property of tyres
T/CAMS /CICEIA168-2023 test method of transient response ability for turbocharger
T/CSAE 273-2022 General test method for transient state combined slip property of tyres
T/CSAE 288-2022 Test methods and requirements for transient phenomenon of power supply port of 60 V～1000 V components of electric vehicles

Guizhou Provincial Standard of the People's Republic of China, transient light method

DB52/T 1104-2016 Transient test method for junction-case thermal resistance of semiconductor devices

Lithuanian Standards Office , transient light method

LST EN 61290-4-2-2011 Optical amplifiers - Test methods -- Part 4-2: Gain transient parameters - Broadband source method (IEC 61290-4-2:2011)
LST EN 61290-4-1-2011 Optical amplifiers - Test methods -- Part 4-1: Gain transient parameters - Two-wavelength method (IEC 61290-4-1:2011)

Professional Standard - Electron, transient light method

SJ/T 10482-1994 Test method for characterizing semiconductor deep levels by transient capacitance techniques

Korean Agency for Technology and Standards (KATS), transient light method

KS R 3959-2018 Passenger cars — Validation of vehicle dynamic simulation — Lateral transient response test methods
KS R ISO 7401-2014(2019) Road vehicles — Lateral transient response test methods — Open-loop test methods
KS R ISO 7401:2008 Road vehicles-Lateral transient response test methods-Open-loop test methods
KS R ISO 7401:2014 Road vehicles — Lateral transient response test methods — Open-loop test methods
KS R ISO 8725:2008 Road vehicles－Transient open-loop response test method with one period of sinusoidal input
KS R ISO 8725-2008(2013) Road vehicles－Transient open-loop response test method with one period of sinusoidal input
KS R ISO 8726-2008(2013) Road vehicles－Transient open-loop response test method with pseudo-random steering input
KS R ISO 8726:2008 Road vehicles－Transient open-loop response test method with pseudo-random steering input
KS R ISO 14793-2015(2020) Road vehicles－Heavy commercial vehicles and buses－Lateral transient response test methods
KS B ISO 5347-18-2014(2019) Methods for the calibration of vibration and shock pick-ups — Part 18: Testing of transient temperature sensitivity
KS C IEC 61000-4-33-2012(2017) Electromagnetic compatibility(EMC)－Part 4-33：Testing and measurement techniques－Measurement methods for high-power transient parameters
KS C IEC 61300-3-28:2020 Fibre optic interconnecting devices and passive components — Basic test and measurement procedures — Part 3-28: Examinations and measurements — Transient loss
KS C IEC 61300-3-28:2014 Fibre optic interconnecting devices and passive components — Basic test and measurement procedures — Part 3-28: Examinations and measurements — Transient loss

KR-KS, transient light method

KS R 3959-2018(2023) Passenger cars — Validation of vehicle dynamic simulation — Lateral transient response test methods
KS R ISO 22140-2023 Passenger cars — Validation of vehicle dynamic simulation — Lateral transient response test methods
KS C IEC 61300-3-28-2020 Fibre optic interconnecting devices and passive components — Basic test and measurement procedures — Part 3-28: Examinations and measurements — Transient loss

Japanese Industrial Standards Committee (JISC), transient light method

JIS C 6122-4-2:2013 Optical amplifiers -- Test methods -- Part 4-2: Transient parameters -- Measurement of gain parameters using broadband source method
JIS C 6122-4-1:2013 Optical amplifiers.Test methods.Part 4-1: Transient parameters.Measurement of gain parameters using two-wavelength method
JIS C 6122-4-3:2018 Optical amplifiers -- Test methods -- Part 4-3: Power transient parameters -- Single channel optical amplifiers in output power control
JIS C 61300-3-28:2009 Fiber optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 3-28: Examinations and measurements -- Transient loss

Institute of Interconnecting and Packaging Electronic Circuits (IPC), transient light method

IPC TM-650 2.5.33.2-1998 Measurement of Electrical Overstress from Soldering Hand Tools - Transient Measurements

CENELEC - European Committee for Electrotechnical Standardization, transient light method

EN IEC 61290-4-4:2018 Optical amplifiers - Test methods - Part 4-4: Gain transient parameters - Single channel optical amplifiers with gain control
EN 61290-4-3:2015 Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
EN 61300-3-28:2002 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 3-28: Examinations and Measurements Transient Loss

International Organization for Standardization (ISO), transient light method

ISO 7401:2011 Road vehicles - Lateral transient response test methods - Open-loop test methods
ISO 7401:2003 Road vehicles - Lateral transient response tests methods - Open-loop test methods
ISO 14793:2003 Road vehicles - Heavy commercial vehicles and buses - Lateral transient response test methods
ISO 22140:2021 Passenger cars - Validation of vehicle dynamics simulation - Lateral transient response test methods
ISO/TR 8725:1988 Road vehicles; transient open-loop response test method with one period of sinusoidal input
ISO/TR 8726:1988 Road vehicles; transient open-loop response test method with pseudo-random steering input
ISO 22007-2:2022 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method

Sichuan Provincial Standard of the People's Republic of China, transient light method

DB51/T 2434-2017 Transient Measurement of Material Thermal Conductivity and Thermal Diffusivity—Pulse Method

American Society for Testing and Materials (ASTM), transient light method

ASTM F978-90(1996)e1 Standard Test Method for Characterizing Semiconductor Deep Levels by Transient Capacitance Techniques
ASTM D7984-21 Standard Test Method for Measurement of Thermal Effusivity of Fabrics Using a Modified Transient Plane Source (MTPS) Instrument
ASTM D7984-16 Standard Test Method for Measurement of Thermal Effusivity of Fabrics Using a Modified Transient Plane Source (MTPS) Instrument
ASTM E598-08(2020) Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter

Professional Standard - Environmental Protection, transient light method

HJ/T 290-2006 Equipment specifications and quality control requirements for gasoline vehicles exhaust emission test in short transient loaded mode
HJ/T 396-2007 Equipment Specifications and Quality Control Requirements for In-use Vehicles with Ignition Engine Exhaust Emission Test in Transient Loaded Mode

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, transient light method

JEDEC JESD51-14-2010 Transient Dual Interface Test Method for the Measurement of the Thermal Resistance Junction to Case of Semiconductor Devices with Heat Flow Trough a Single Path

IEC - International Electrotechnical Commission, transient light method

TS 62215-2-2007 Integrated circuits – Measurement of impulse immunity – Part 2: Synchronous transient injection method (Edition 1.0)

Taiwan Provincial Standard of the People's Republic of China, transient light method

CNS 10786-1984 Test Code for Performance of Drum Sanders
CNS 10787-1998 Test code for performance of wide belt sanders
CNS 10789-1995 Test Code for Performance of Scrapers

RU-GOST R, transient light method

GOST 34374.2-2017 Plastics. Determination of thermal conductivity and thermal diffusivity. Part 2. Transient plane heat source (hot disc) method

Jiangxi Provincial Standard of the People's Republic of China, transient light method

DB36/ 617-2011 Limits of Exhaust Pollutant Emissions for Light Vehicles with Ignition Engines in Simple Transient Conditions

Shanghai Provincial Standard of the People's Republic of China, transient light method

DB31/ 357-2015 Limits of Exhaust Pollutant Emissions for Light Vehicles with Ignition Engines in Simple Transient Conditions

Xinjiang Provincial Standard of the People's Republic of China, transient light method

DB65/T 2880-2008 Limits for exhaust pollutants from in-use light-duty vehicle equipped ignition engine under simple transient driving mode conditions

Fujian Provincial Standard of the People's Republic of China, transient light method

DB35/ 1300-2012 Limits of Exhaust Pollutant Emissions for Light Vehicles with Ignition Engines in Simple Transient Conditions

AENOR, transient light method

UNE-EN 61300-3-28:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss

工业和信息化部, transient light method

YD/T 3394-2018 Dynamic monitoring method of optical passive devices