ZH
RU
ES

Solid Material Composition Analysis

Solid Material Composition Analysis, Total:498 items.

In the international standard classification, Solid Material Composition Analysis involves: Inorganic chemicals, Fuels, Magnetic materials, Components for electrical equipment, Wastes, Coals, Environmental protection, Particle size analysis. Sieving, Measurement of volume, mass, density, viscosity, Fertilizers, Plastics, Products of the chemical industry, Mechanical testing, Analytical chemistry, Protection against fire, Ferrous metals, Mining equipment, Construction materials, Rubber and plastics products, Electronic components in general, Ceramics, Insulating materials, Vocabularies, Farming and forestry, Refractories, Medical equipment, Insulating fluids, Air quality, Textile fibres, Small craft, Animal feeding stuffs, Metrology and measurement in general, Testing of metals, Company organization and management, Pipeline components and pipelines, Fluid power systems, Soil quality. Pedology, Nuclear energy engineering, Sports equipment and facilities, Semiconducting materials, Lubricants, industrial oils and related products, Materials for aerospace construction, Paints and varnishes, Leather technology, Bearings, Powder metallurgy, Reinforced plastics, Water quality, General methods of tests and analysis for food products, Meat, meat products and other animal produce.

CL-INN, Solid Material Composition Analysis

INDITECNOR 20-17ch-1960

German Institute for Standardization, Solid Material Composition Analysis

DIN 51941-1:1994 Testing of carbon materials - Determination of chemical composition - Part 1: Sample preparation, solid materials, solid binders and impregnants
DIN 19698-1:2014 Characterization of solids - Sampling of solid and semi-solid materials - Part 1: Guidance for the segmental sampling of stockpiles of unknown composite
DIN 51941-1:2008-01 Testing of carbonaceous materials - Determination of chemical composition - Part 1: Sample preparation, solid materials, solid binders and impregnants
DIN 51729-10:2011-04 Testing of solid fuels - Determination of chemical composition of fuel ash - Part 10: X-Ray Fluorescence Analysis
DIN 51729-10:1996 Testing of solid fuels - Determination of chemical composition of fuel ash - Part 10: X-Ray fluorescence analysis
DIN 51939:2004 Testing of carbon materials - Determination of floating coke content in calcined coke - Solid materials
DIN 51941-1:2008 Testing of carbonaceous materials - Determination of chemical composition - Part 1: Sample preparation, solid materials, solid binders and impregnants
DIN 51729-10:2011 Testing of solid fuels - Determination of chemical composition of fuel ash - Part 10: X-Ray Fluorescence Analysis
DIN 19698-1:2014-05 Characterization of solids - Sampling of solid and semi-solid materials - Part 1: Guidance for the segmental sampling of stockpiles of unknown composite
DIN 51734:2008 Testing of solid mineral fuels - Proximate analysis and calculation of fixed carbon
DIN 53477:2018-09 Testing of plastics - Determination of particle size distribution of moulding materials by dry sieving analysis
DIN 53436-4:2015 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 4: Thermal decomposition method for liquids
DIN 51903:1981 Testing of carbon materials; determination of ash value; solid matters
DIN 51734:2008-12 Testing of solid mineral fuels - Proximate analysis and calculation of fixed carbon
DIN 19698-5:2018-06 Characterization of solids - Sampling of solid and semi-solid materials - Part 5: Guidance for sampling hot-spots of populations
DIN 51872-5:1996 Testing of gaseous fuels and other gases - Determination of the components - Part 5: Capillary gaschromatographic procedure
DIN 51079-1:2004 Testing of ceramic materials - Chemical analysis of silicon carbide used as raw material and as constituent in materials - Part 1: Decomposition with sodium carbonate and boric acid
DIN 51079-2:2004 Testing of ceramic materials - Chemical analysis of silicon carbide used as raw material and as constituent in materials - Part 2: Pressure decomposition with acid
DIN EN ISO 19712-2:2013-04 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007); German version EN ISO 19712-2:2013
DIN 51903:2012-11 Testing of carbonaceous materials - Determination of ash value - Solid materials
DIN 51724-3:2008 Solid mineral fuels - Determination of sulfur - Part 3: Instrumental methods
DIN 51718:2002-06 Testing of solid fuels - Determination of the water content and the moisture of analysis sample
DIN EN 12048:1996-11 Solid fertilizers and liming material - Determination of moisture content - Gravimetric method by drying at (105 ± 2) °C (ISO 8190:1992, modified); German version EN 12048:1996
DIN 51004:1994 Thermal analysis; determination of melting temperatures of crystalline materials by differential thermal analysis
DIN 53436-2:2015 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 2: Thermal decomposition method
DIN 54385:2016 Solid recovered fuels - Collection of representative analytical samples from heterogeneous materials of low bulk density using the pressing-drill method
DIN 54385:2016-08 Solid recovered fuels - Collection of representative analytical samples from heterogeneous materials of low bulk density using the pressing-drill method
DIN 19698-2:2016 Characterization of solids - Sampling of solid and semi-solid materials - Part 2: Guidance for taking samples of stockpiles for integral characterisation
DIN 19698-2:2016-12 Characterization of solids - Sampling of solid and semi-solid materials - Part 2: Guidance for taking samples of stockpiles for integral characterisation
DIN EN ISO 19712-3:2022-07 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2022); German version EN ISO 19712-3:2022
DIN 51718:2002 Testing of solid fuels - Determination of the water content and the moisture of analysis sample
DIN 51733:2016 Testing of solid mineral fuels - Ultimate analysis and calculation of oxygen content
DIN 51733:2008 Testing of solid mineral fuels - Ultimate analysis and calculation of oxygen content
DIN 51733:2016-04 Testing of solid mineral fuels - Ultimate analysis and calculation of oxygen content
DIN 51938:2015-09 Testing of carbonaceous materials - Determination of particle size distribution by sieving - Solid matters
DIN 53436-2:2015-12 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 2: Thermal decomposition method
DIN 51904:2012-11 Testing of carbonaceous materials - Determination of water content - Solid matters
DIN 51729-8:2001 Solid fuels - Determination of chemical composition of fuel ash - Part 8: Determination of soda and potash (Na<(Index)2>O, K<(Index)2>O) contents
DIN EN ISO 18134-3:2022-07 Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample (ISO/DIS 18134-3:2022); German and English version prEN ISO 18134-3:2022 / Note: Date of issue 2022-06-03*Intended as replacement for DIN...
DIN EN ISO 18134-3:2015-12 Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample (ISO 18134-3:2015); German version EN ISO 18134-3:2015 / Note: To be replaced by DIN EN ISO 18134-3 (2022-07).
DIN EN ISO 12782-4:2012-09 Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 4: Extraction of humic substances from solid samples (ISO 12782-4:2012); German version EN ISO 12782-4:2012
DIN EN 15415-3:2012-06 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles; German version EN 15415-3:2012
DIN EN 14397-1:2010-07 Fertilizers and liming materials - Determination of carbon dioxide - Part 1: Method for solid fertilizers; German version EN 14397-1:2010
DIN EN ISO 21660-3:2021-06 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample (ISO 21660-3:2021); German version EN ISO 21660-3:2021
DIN EN ISO 22940:2021-12 Solid recovered fuels - Determination of elemental composition by X-ray fluorescence (ISO 22940:2021); German version EN ISO 22940:2021
DIN ISO 4384-2:2014-07 Plain bearings - Hardness testing of bearing metals - Part 2: Solid materials (ISO 4384-2:2011)
DIN EN 62631-1:2012-03 Dielectric and resistive properties of solid insulating materials - Part 1: General (IEC 62631-1:2011); German version EN 62631-1:2011
DIN 51076-1:1991 Testing of ceramic materials; chemical analysis of silicon carbide as main or minor constituent of ceramic materials; determination of SiC in materials with oxidic components and binding materials
DIN 51729-11:1998-11 Testing of solid fuels - Determination of chemical composition of fuel ash - Part 11: Determination by inductively coupled plasma emission spectrometry (ICP-OES)
DIN EN 6041:2018-03 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC); German and English version EN 6041:2018
DIN ISO 4384-2:2014 Plain bearings - Hardness testing of bearing metals - Part 2: Solid materials (ISO 4384-2:2011)
DIN 51729-8:2001-05 Solid fuels - Determination of chemical composition of fuel ash - Part 8: Determination of soda and potash (Na<(Index)2>O, K<(Index)2>O) contents
DIN 53436-1:2015 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 1: Decomposition apparatus and determination of test temperature
DIN EN 6041:2018 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC); German and English version EN 6041:2018
DIN 53436-4:2015-12 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 4: Thermal decomposition method for liquids / Note: Applies in conjunction with DIN 53436-1 (2015-12), DIN 53436-2 (2015-12).
DIN EN 6064:2018-03 Aerospace series - Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC); German and English version EN 6064:2017
DIN EN ISO 22940:2020 Solid recovered fuels - Determination of elemental composition by X-ray fluorescence (ISO/DIS 22940:2020); German and English version prEN ISO 22940:2020
DIN EN 15296:2011 Solid biofuels - Conversion of analytical results from one basis to another; German version EN 15296:2011
DIN EN 16245-2:2013-08 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers; German version EN 16245-2:2013

CZ-CSN, Solid Material Composition Analysis

CSN 44 1358-1976 Analysis of solid fuel ash
CSN 44 1308-1996 Solid minerál fuels. Sampling from stockpiles for size analysis
CSN 441310-2001 Solid fuels - Symbols of analytical parameters and formulae for converting the results of analyses of different states of fuels
CSN 44 1310-2001 Solid fuels - Symbols of analytical parameters and formulae for converting the results of analyses of different states of fuels
CSN ISO 1213-2:1994 Solid mineral fuels. Vocabulary. Part 2: Terms relating to sampling, testing and analysis
CSN 44 1312-1993 Solid mineral fuels. Calibration and control of determination of ash content by radiation analysers

RO-ASRO, Solid Material Composition Analysis

STAS 9622/1-1986 SOLID FUELS Densimetric analysis
STAS 10274/10-1975 SOLID FUELS ASH ANALYSIS Delermination of vanadium
STAS 10274/12-1975 SOLID FUELS ASH ANALYSIS Delermination of barium
STAS 10274/4-1990 Solid fuels ASH ANALYSIS Iron determination
STAS 10274/5-1975 SOLID FUELS ASH ANALYSIS Determination of aluminium
STAS 10274/6-1988 Solid fuels ASH ANALYSIS Titamum determination
STAS 10274/9-1989 Solid fuels ASH ANALYSIS Manganese determination
STAS 10274/13-1988 Solid fuels ASH ANALYSIS Natrium and potassium determination
STAS 10274/8-1988 SOLID FUELS ASH A1IALYS1S Magnesium contest determination
STAS 10274/18-1975 SOLID FUELS ASH ANALYSIS Determination of hygroscopic moisture
STAS 10274 17-1975 SOLID FUELS ASH ANALYSIS Determination of the loss on ignition
STAS 10274/11-1975 SOLID FURLS ASH ANALYSIS Determination of sulphur
STAS 10274/14-1975 SOLID FUELS ASH ANALYSIS Determination of phosphorus corlent
STAS 10274/16-1975 SOLID FUELS ASH ANALYSIS Determination of carbon content
STAS 10274/3-1988 Solid fuels ASH ANALYSIS Silicon dioxide determination
STAS 10274/1-1983 Solid fuels ASH ANALYSIS General directions for spectral and chemical analysis carrying out
STAS 10274/2-1983 Solid fuck ASH ANALYSIS Quantitative spectral analysis of minor, rare and dispersed elements
STAS 10274/15-1975 SOLID FUELS Ash analysis Determination of non-burnt combustible matter
STAS 69-1971 CAOLIN RAW MATERIALS FOR CERAMIC INDUSTRY Determination of niineralogical compounds by the reasonable analysis
STAS 7856-1967
STAS 398-1992 Solid fues. Symbole relating to the analytical characteristics and factors for the recalculation of analysis results
STAS 10274/19-1984 SOLID FUELS Ash analysis Spectrum quantitative determination of titanium, calcium, magnezium and manganese
STAS SR ISO 8358:1991 Solid fertilizers. Preparation of sampies for chemical and physical analysis
STAS SR ISO 1213-2:1995 Solid mineral fuels - Vocabulary - Part 2: Terms relating to sampling, testing and analysys
SR ISO 4384-2:1994 Plain bearings - Hardness testing of bearing metals - Part 2: Solid materials

RU-GOST R, Solid Material Composition Analysis

GOST 2093-1982 Solid fuel. Size analysis
GOST R 53355-2009 Solid mineral fuels. Ultimate analysis
GOST R 53357-2009 Solid mineral fuels. Proximate analysis
GOST R 53357-2013 Solid mineral fuel. Proximate analysis
GOST R 55113-2012 Solid biofuels. Conversion of analytical results from one basis to another
GOST EN 12048-2013 Solid fertilizers and liming materials. Determination of moisture content. Gravimetric method by drying at (105 ± 2) °C
GOST R ISO 21687-2014 Carbonaceous materials for the production of aluminium. Determination of density by gas pyknometry (volumetric) using helium as the analysis gas. Solid materials
GOST R 59592-2021 Solid mineral fuel. Methods for determination of chemical composition of ash
GOST R 54245-2010 Solid mineral fuel. Calculation of analyses to different bases
GOST 33503-2015 Solid mineral fuel. Methods for determination of moisture in the analysis sample
GOST R 52917-2008 Solid mineral fuels. Methods for determination of moisture in the analysis test sample
GOST R 8.735.1-2011 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring the content of components in liquid and solid substances and materials. Transfer of the units from the State Primary Standard based on coulomet
GOST 8.531-2002 State system for ensuring the uniformity of measurements. Reference materials of composition of solid and disperse materials. Ways of homogeneity assessment
GOST 8.531-1985 State system for ensuring the uniformity of measurements. Homogeneity of powdered certified reference materials of content. Measurement procedure
GOST R 55552-2013 Solid recovered fuels. Determination of particle size distribution. Part 3. Method by image analysis for large dimension particles
GOST R 54233-2010 Solid recovered fuels. Determination of moisture content using the oven dry method. Part 3. Moisture in general analysis sample
GOST 32975.3-2014 Solid biofuels. Determination of moistire content by drying. Part 3. Moisture in general analysis sample
GOST R 54211-2010 Solid biofuels. Determination of moisture content by oven dry method. Part 3. Moisture in general analysis sample
GOST R 55879-2013 Solid mineral fuels. Determination of chemical composition of ash by X-Ray fluorescence
GOST R 57697-2017 Polymer composites. Method for determination of curing properties of pultrusion resins by thermal analysis
GOST EN 14397-1-2013 Fertilizers and liming materials. Determination of carbon dioxide content. Part 1. Method for solid fertilizers
GOST R 54237-2010 Solid mineral fuels. Determination of chemical composition of ash by method of atomic emission spectrometry with inductively coupled plasma
GOST R 54237-2010(2019) Solid mineral fuels. Determination of chemical composition of ash by method of atomic emission spectrometry with inductively coupled plasma
GOST 33512.3-2015 Solid recovered fuels. Determination of moisture content using the oven dry method. Part 3. Moisture in general analysis sample
GOST 27313-2015 Solid mineral fuel. Simbols of quality indicators and calculation of analyses to different bases
GOST R 54218-2010 Solid biofuels. Sampling. Part 2. Methods for sampling particulate material transported in lorries
GOST R ISO 7206-2-2005 Implants for surgery. Partial and total hip joint prostheses. Part 2. Articulating surfaces made of metallic, ceramic and plastics materials
GOST R 54035-2010 Food products, feeds, food raw materials. Method of determination of anabolic steroids and stylben derivatives by gas chromatography with mass spectrometry detector

Professional Standard - Electron, Solid Material Composition Analysis

SJ/T 1505-1997 Chemical analysis methods for products and semifinished products made of gyromagnetic ferrite materials
SJ/T 11075-1996 Methods for chemical analysis of raw materials used in ferrites
SJ/T 10411-2002 Physical analysis methods for permanent ferrite materials
SJ/T 10411-1993 Physical analysis method of permanent ferrite material
SJ/Z 3206.13-1989 General rules for emision spectrum analysis for semiconductor materials
SJ 20744-1999 General rule of infrared absorption spectral analysis for the impurity concentration in semiconductor materials

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Solid Material Composition Analysis

GB/T 11436-1989 Chemical analysis methods for products and semifinished products made of soft ferrite materials
GB/T 11436-2012 Chemical analysis methods for products and semi-finished products made of soft ferrite materials
GB/T 28731-2012 Proximate analysis of solid biofuels
GB/T 30725-2014 Determination of ash composition in solid biofuels
GB/T 28898-2012 Evaluation of uncertainty in chemical composition analysis for metallurgical materials
GB/T 21650.3-2011 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption.Part 3:Analysis of micropores by gas adsorption
GB/T 21650.2-2008 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption.Part 2: Analysis of mesopores and macropores by gas adsorption
GB/T 4298-1984 The activation analysis method for the determination of elemental impurities in semiconductor silicon materials
GB/T 32496-2016 Test method for volume fraction of reinforcement in metal matrix composites.Image analysis method
GB/T 31838.1-2015 Solid insulating materials.Dielectric and resistive properties.Part 1:General
GB/T 20671.11-2006 Classification system and test methods for nonmetallic gasket materials-Part11:Standard practice for determining resistance of synthetic polymeric materials to fungi
GB/T 19851.11-2005 Sports equipment and playground for middle school & primary school Part 11:Synthetic surfaced athletic ground
GB/T 21650.1-2008 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption.Part 1: Mercury porosimetry

Association Francaise de Normalisation, Solid Material Composition Analysis

FD U42-409*FD CR 13960:2002 Solid fertilizers - Homogeneity analysis
NF X34-116:2011 Solid biofuels - Conversion of analytical results from one basis to another.
NF EN ISO 105-X07:1997 Textiles - Essais de solidité des teintures - Partie X07 : solidité des teintures à la surteinture : laine.
NF EN ISO 105-X02:1996 Textiles - Essais de solidité des teintures - Partie X02 : solidité des teintures au carbonisage : acide sulfurique.
NF EN ISO 105-X05:1997 Textiles - Essais de solidité des teintures - Partie X05 : solidité des teintures aux solvants organiques.
NF EN ISO 105-G03:1997 Textiles - Essais de solidité des teintures - Partie G03 : solidité des teintures à l'ozone dans l'atmosphère.
NF EN ISO 105-X01:1996 Textiles - Essais de solidité des teintures - Partie X01 : solidité des teintures au carbonisage : chlorure d'aluminium.
NF EN ISO 19712-3:2022 Plastiques - Matériaux décoratifs massifs de revêtement de surface - Partie 3 : détermination des propriétés - Produits mis en forme
NF M03-033:1968 SOLID FUELS. DETERMINATION OF MINERAL MATTER IN COAL.
NF M03-029:2003 Solid mineral fuels - Determination of moisture of a test portion for general analysis of coke.
BP X10-041:2004 Caractérisation sensorielle des matériaux - Recommandations pratiques pour l'analyse tactile de la matière première au produit fini
BP X10-042:2006 Caractérisation sensorielle des matériaux - Recommandations pratiques pour l'analyse visuelle de la matière première au produit fini
NF T54-370-3*NF EN ISO 19712-3:2022 Plastics - Decorative solid surfacing materials - Part 3 : determination of properties - Solid surface shapes
NF ISO 22262-1:2012 Qualité de l'air - Matériaux solides - Partie 1 : échantillonnage et dosage qualitatif de l'amiante dans les matériaux solides d'origine commerciale
NF EN ISO 22940:2021 Combustibles solides de récupération - Détermination de la composition élémentaire par fluorescence de rayons X
NF T54-370-2*NF EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2 : determination of properties - Sheet goods
NF T51-223:1985 Plastics. Semi-cristalline materials. Determination of the conventional melting temperature by thermal analyse.
NF EN ISO 10350-1:2017 Plastiques - Acquisition et présentation de caractéristiques intrinsèques comparables - Partie 1 : matériaux pour moulage
NF EN 15415-3:2012 Combustibles solides de récupération - Détermination de la distribution granulométrique - Partie 3 : méthode par analyse d'images des particules de grande dimension
XP P41-280:2008 Effect of materials on the quality of water intended for human consumption . Objects constituted by several components among which at least organic one entering the contact of the water . Obtaining and analysis of the water of migration
NF ISO 9195:1992 Mesure de débit des liquides dans les canaux découverts - Échantillonnage et analyse des matériaux du lit graveleux
NF EN ISO 19712-2:2013 Plastiques - Matériaux décoratifs massifs de revêtement de surface - Partie 2 : détermination des propriétés - Produits en feuilles
NF EN ISO 21660-3:2021 Combustibles solides de récupération - Détermination de l'humidité par la méthode de séchage à l'étuve - Partie 3 : humidité de l'échantillon pour analyse générale
BP X10-040:2003 Caractérisation sensorielle des matériaux - Méthodologie générale - Recommandations méthodologiques pour l'analyse sensorielle de la matière première au produit fini
NF J95-046-1:2001 Small craft - Hull construction and scantlings - Part 1 : materials : thermosetting resins, glass-fibre reinforcement, reference laminate.
NF U42-410*NF EN 12049:1997 Solid fertilizers and liming materials. Determination of moisture content. Gravimetric method by drying under reduced pressure.
NF X34-214-3*NF EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3 : method by image analysis for large dimension particles
NF B40-003-7*NF EN ISO 1927-7:2013 Monolithic (unsahped) refractory materials - Part 7 : tests on pre-formed shapes
NF X10-340*NF ISO 9195:1992 Liquid flow measurement in open channels. Sampling and analysis of gravel-bed material.
NF X34-106-3:2010 Solid biofuels - Determination of moisture content - Oven dry method - Part 3 : moisture in general analysis sample.
NF X34-201-3*NF EN ISO 21660-3:2021 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3 : moisture in general analysis sample
NF EN ISO 18134-3:2015 Biocombustibles solides - Méthodes de détermination de la teneur en humidité - Méthode de séchage à l'étuve - Partie 3 : humidité de l'échantillon pour analyse générale
NF C26-631-1*NF EN 62631-1:2011 Dielectric and resistive properties of solid insulating materials - Part 1 : General
NF EN 62631-1:2011 Propriétés diélectriques et résistives des matériaux isolants solides - Partie 1 : généralités
NF X34-106-3*NF EN ISO 18134-3:2015 Solid biofuels - Determination of moisture content - Oven dry method - Part 3 : moisture in general analysis sample
NF U42-411*NF EN 12048:1997 Solid fertilizers and liming materials. Determination of moisture content. Gravimetric method by drying at (105 + or - 2) degrees C;.
NF L17-041*NF EN 6041:2018 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
NF X34-116*NF EN ISO 16993:2016 Solid biofuels - Conversion of analytical results from one basis to another
NF EN ISO 16993:2016 Biocombustibles solides - Conversion de résultats analytiques d'une base en une autre base
NF ISO 20048-2:2023 Biocombustibles solides - Détermination des caractéristiques de dégagement gazeux et d'appauvrissement en oxygène - Partie 2 : méthode opérationnelle d'analyse d'un dégagement de monoxyde de carbone
NF M01-005:1967 Solid mineral fuels. Methods for evaluating random errors in the preparation and analysis of a sample.
NF T70-337:1997 Energetic materials for defense. Physico-chemical analysis and properties. Determination of secondary explosive constituents by room temperature extraction.
NF T70-302:1995 Energetic materials for defense. Physical-chemical analysis and properties. Tnt solidifcation temperature. Automatized method.
NF C26-943-1/A1*NF EN 60464-3-1/A1:2006 Varnishes used for electrical insulation - Part 3 : specifications for individual materials - Sheet 1 : ambient curing finishing varnishes
NF EN ISO 12215-1:2018 Petits navires - Construction de coques et échantillons - Partie : matériaux : Résines thermodurcissables, renforcement de fibres de verre, stratifié de référence
NF EN ISO 638-1:2022 Papiers, cartons, pâtes et nanomatériaux cellulosiques - Détermination de la teneur en matières sèches par séchage à l'étuve - Partie 1 : matériaux sous forme solide

FI-SFS, Solid Material Composition Analysis

SFS 3925-1989

GOSTR, Solid Material Composition Analysis

GOST R 53355-2018 Solid mineral fuel. Ultimate analysis
GOST 34092-2017 Solid biofuel. Conversion of analytical results on different basis

British Standards Institution (BSI), Solid Material Composition Analysis

BS EN ISO 16993:2015 Solid biofuels. Conversion of analytical results from one basis to another
BS EN 15296:2011 Solid biofuels. Conversion of analytical results from one basis to another
BS ISO 21687:2007 Carbonaceous materials used in the production of aluminium - Determination of density by gas pyknometry (volumetric) using helium as the analysis gas - Solid materials
DD CEN/TS 15296:2006 Solid Biofuels — Calculation of analyses to different bases
BS ISO 11726:2005 Solid mineral fuels - Guidelines for the validation of alternative methods of analysis
BS ISO 19712-1:2009 Plastics. Decorative solid surfacing materials. Classification and specifications
BS EN ISO 19712-1:2013 Plastics. Decorative solid surfacing materials. Classification and specifications
BS ISO 687:2010 Solid mineral fuels. Coke. Determination of moisture in the general analysis test sample
BS DD CEN/TS 15296:2006 Solid biofuels - Calculation of analyses to different bases
BS 3323:1992 Glossary of terms relating to sampling, testing and analysis of solid mineral fuels
BS ISO 15239:2005 Solid mineral fuels - Evaluation of the measurement performance of on-line analysers
BS ISO 15901-3:2007 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption. Analysis of micropores by gas adsorption
BS EN 15414-3:2011 Solid recovered fuels. Determination of moisture content using the oven dry method. Moisture in general analysis sample
PD ISO/TS 16996:2015 Solid biofuels. Determination of elemental composition by X-ray fluorescence
BS EN ISO 1927-1:2012 Monolithic (unshaped) refractory products. Introduction and classification
BS ISO 15901-2:2006(2007) Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Analysis of mesopores and macropores by gas adsorption
BS ISO 15901-2:2007 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Analysis of mesopores and macropores by gas adsorption
BS ISO 1213-2:2016 Solid mineral fuels. Vocabulary. Terms relating to sampling, testing and analysis
BS EN 15415-3:2012 Solid recovered fuels. Determination of particle size distribution. Method by image analysis for large dimension particles
BS 5551-2.8:1991 Fertilizers. Sampling. Methods for preparation of samples of solid fertilizer for chemical and physical analysis
BS ISO 11726:2017 Tracked Changes. Solid mineral fuels. Guidelines for the validation of alternative methods of analysis
BS EN 14774-3:2009 Solid biofuels - Determination of moisture content - Oven dry method - Moisture in general analysis sample
BS EN 14774-3:2010 Solid biofuels. Determination of moisture content. Oven dry method. Moisture in general analysis sample
BS EN ISO 18134-3:2015 Solid biofuels. Determination of moisture content. Oven dry method. Moisture in general analysis sample
BS ISO 15901-2:2022 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Analysis of nanopores by gas adsorption
DD CEN/TS 15414-3:2006 Solid recovered fuels — Determination of moisture content using the oven dry method — Part 3: Moisture in general analysis sample
BS 5551 Sec.2.8:1991 Fertilizers. Sampling. Methods for preparation of samples of solid fertilizer for chemical and physical analysis
BS EN ISO 21660-3:2021 Solid recovered fuels. Determination of moisture content using the oven dry method. Moisture in general analysis sample
20/30426694 DC BS ISO 22940. Solid recovered fuels. Determination of elemental composition by X-ray fluorescence
DD ISO/TS 12902:2002 Solid mineral fuels. Determination of total carbon, hydrogen and nitrogen. Instrumental methods
20/30410823 DC BS ISO 15901-2. Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption. Part 2. Analysis of nanopores by gas adsorption
BS 5551-4.5:1993 Fertilizers. Chemical analysis. Method for determination of mineral-acid-soluble sulfate content of solid fertilizers
BS DD CEN/TS 14774-3:2004 Solid biofuels - Methods for the determination of moisture content - Oven dry method - Moisture in general analysis sample
BS EN 12457-2:2002 Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)
BS ISO 22415:2019 Surface chemical analysis. Secondary ion mass spectrometry. Method for determining yield volume in argon cluster sputter depth profiling of organic materials
BS ISO 11722:2013 Solid mineral fuels. Hard coal. Determination of moisture in the general analysis test sample by drying in nitrogen
DD CEN/TS 14774-3:2004 Solid biofuels - Methods for the determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample
BS EN 12457-3:2002 Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with a high solid content and with a particle size below 4 mm (wi
BS EN 6041:2018 Aerospace series. Non-metallic materials. Test method. Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
BS EN 12049:1997(2011) Solid fertilizers and liming materials - Determination of moisture content - Gravimetric method by drying under reduced pressure
BS EN 12049:1997 Solid fertilizers and liming materials - Determination of moisture content - Gravimetric method by drying under reduced pressure
22/30439841 DC BS ENI SO 18134-3. Solid biofuels. Determination of moisture content. Oven dry method - Part 3. Moisture in general analysis sample
BS DD CEN/TS 15414-3:2006 Solid recovered fuels - Determination of moisture content using the oven dry method - Moisture in general analysis sample
BS EN 6064:2017 Aerospace series. Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC)

International Organization for Standardization (ISO), Solid Material Composition Analysis

ISO 16993:2016 Solid biofuels - Conversion of analytical results from one basis to another
ISO 21687:2007 Carbonaceous materials used in the production of aluminium - Determination of density by gas pyknometry (volumetric) using helium as the analysis gas - Solid materials
ISO 11726:2004 Solid mineral fuels - Guidelines for the validation of alternative methods of analysis
ISO 11726:2017 Solid mineral fuels - Guidelines for the validation of alternative methods of analysis
ISO 19712-1:2008 Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications
ISO 19712-3:2022 Plastics — Decorative solid surfacing materials — Part 3: Determination of properties — Solid surface shapes
ISO 687:2004 Solid mineral fuels - Coke - Determination of moisture in the general analysis test sample
ISO 687:2010 Solid mineral fuels - Coke - Determination of moisture in the general analysis test sample
ISO 8189:1992 Solid fertilizers — Determination of moisture content — Gravimetric method by drying under reduced pressure
ISO 8358:1991 Solid fertilizers; preparation of samples for chemical and physical analysis
ISO 15901-2:2006 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 2: Analysis of mesopores and macropores by gas adsorption
ISO 15901-3:2007 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 3: Analysis of micropores by gas adsorption
ISO 15239:2005 Solid mineral fuels - Evaluation of the measurement performance of on-line analysers
ISO 19712-2:2007 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods
ISO/CD 687:2023 Solid mineral fuels — Coke — Determination of moisture in the general analysis test sample
ISO 1213-2:2016 Solid mineral fuels - Vocabulary - Part 2: Terms relating to sampling, testing and analysis
ISO 1213-2:1992 Solid mineral fuels; vocabulary; part 2: terms relating to sampling, testing and analysis
ISO 15901-2:2022 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption — Part 2: Analysis of nanopores by gas adsorption
ISO 925:1980 Solid mineral fuels; Determination of carbon dioxide content; Gravimetric method
ISO 11722:1999 Solid mineral fuels - Hard coal - Determination of moisture in the general analysis test sample by drying in nitrogen
ISO 21660-3:2021 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample
ISO 18134-3:2015 Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample
ISO 16993:2015 Solid biofuels — Conversion of analytical results from one basis to another
ISO 1927-7:2012 Monolithic (unshaped) refractory products - Part 7: Tests on pre-formed shapes
ISO/R 1213-2:1971 Vocabulary of terms relating to solid mineral fuels — Part 2: Terms relating to coal sampling and analysis
ISO 8190:1992 Solid fertilizers — Determination of moisture content — Gravimetric method by drying at (105 plus or minus 2) degrees C
ISO 15901-2:2006/cor 1:2007 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 2: Analysis of mesopores and macropores by gas adsorption; Technical Corrigendum 1
ISO 11722:2013 Solid mineral fuels - Hard coal - Determination of moisture in the general analysis test sample by drying in nitrogen
ISO 4384-2:2011 Plain bearings - Hardness testing of bearing metals - Part 2: Solid materials
ISO 4384-2:2022 Plain bearings — Hardness testing of bearing metals — Part 2: Solid materials
ISO 15901-1:2005 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 1: Mercury porosimetry
ISO 15901-1:2016 Evaluation of pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 1: Mercury porosimetry

Professional Standard - Agriculture, Solid Material Composition Analysis

NY/T 1881.3-2010 Densified biofuel-Test methods Part 3:Moisture in general analysis sample
NY/T 1881.5-2010 Densified biofuel-Test methods Part 5:Ash content
NY/T 1881.2-2010 Densified biofuel-Test methods Part 2:Total moisture
NY/T 1881.4-2010 Densified biofuel-Test methods Part 4:Content of volatile matter
NY/T 1881.1-2010 Densified biofuel-Test methods Part 1:General principle
NY/T 1881.7-2010 Densified biofuel-Test methods Part 7:Particle density
NY/T 1881.6-2010 Densified biofuel-Test methods Part 6:Bulk density
NY/T 1881.8-2010 Densified biofuel-Test methods Part 8:Mechanical durability

Professional Standard - Railway, Solid Material Composition Analysis

TB/T 2946-1999 Analysis of pyrolysis gas toxicity of materials

Japanese Industrial Standards Committee (JISC), Solid Material Composition Analysis

JIS Z 8831-3:2010 Pore size distribution and porosity of solid materials -- Part 3: Analysis of micropores by gas adsorption
JIS Z 8831-2:2010 Pore size distribution and porosity of solid materials -- Part 2: Analysis of mesopores and macropores by gas adsorption
JIS K 7040:1998 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) components -- Determination of the amounts of constituents using the gravimetric method

Korean Agency for Technology and Standards (KATS), Solid Material Composition Analysis

KS L 2316-2010(2020) Volumetric glass material for chemical analysis
KS L 2316-1995 Volumetric glass material for chemical analysis
KS M ISO 21687:2011 Carbonaceous materials used in the production of aluminium-Determination of density by gas pyknometry (volumetric) using helium as the analysis gas-Solid materials
KS M ISO 21687:2016 Carbonaceous materials used in the production of aluminium－Determination of density by gas pyknometry (volumetric) using helium as the analysis gas－Solid materials
KS I ISO TS 29041:2016 Gas mixtures－Gravimetric preparation－Mastering correlations in composition
KS L 2316-2010 Volumetric glass material for chemical analysis
KS E ISO 11726:2007 Solid mineral fuels－Guidelines for the validation of alternative methods of analysis
KS E ISO 11726:2018 Solid mineral fuels — Guidelines for the validation of alternative methods of analysis
KS M 8358-2005(2018)
KS M ISO 21687-2016(2021) Carbonaceous materials used in the production of aluminium－Determination of density by gas pyknometry (volumetric) using helium as the analysis gas－Solid materials
KS M ISO 8358:2007 Solid fertilizers-Preparation of samples for chemical and physical analysis
KS M ISO 8358:2013 Solid fertilizers－Preparation of samples for chemical and physical analysis
KS M ISO 8358-2007(2012) Solid fertilizers－Preparation of samples for chemical and physical analysis
KS E ISO 15239:2007 Solid mineral fuels－Evaluation of the measurement performance of on-line analysers
KS E ISO 687:2022 Solid mineral fuels — Coke — Determination of moisture in the general analysis test sample
KS E ISO 11722:2007 Solid mineral fuels－Hard coal－Determination of moisture in the general analysis test sample by drying in nitrogen
KS E ISO 11722:2017 Solid mineral fuels－Hard coal－Determination of moisture in the general analysis test sample by drying in nitrogen
KS K 0828-2016 Test method for quantitative analysis of composition of blended filling materialsdown and feathers blended with polyester
KS M 1995-2009 Determination of organic compounds emitted from plastics－Gas chromatographic method
KS E ISO 1213-2:2003 Solid mineral fuels－Vocabulary－Part 2：Terms relating to sampling, testing and analysis
KS E ISO 1213-2:2018 Solid mineral fuels — Vocabulary — Part 2: Terms relating to sampling, testing and analysis
KS C IEC 62631-1:2022 Dielectric and resistive properties of solid insulating materials —Part 1: General
KS K 0828-2016(2021) Test method for quantitative analysis of composition of blended filling materialsdown and feathers blended with polyester
KS M 3536-1999
KS E ISO 11722-2017(2022) Solid mineral fuels — Hard coal — Determination of moisture in the general analysis test sample by drying in nitrogen
KS M ISO 12086-1-2013(2018) PLASTICS — FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS — PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
KS M ISO 20568-1:2019 Plastics — Fluoropolymer dispersions and moulding and extrusion materials — Part 1: Designation system and basis for specifications

Malaysia Standards, Solid Material Composition Analysis

MS 1466-1999 Method of test for linear thermal expansion of solid materials by thermomechanical analysis

AENOR, Solid Material Composition Analysis

UNE 32002:1995 SOLID MINERAL FUELS. DETERMINATION OF MOISTURE IN THE ANALYSIS SAMPLE.
UNE 32302:1995 SOLID MINERAL FUELS. PETROGRAPHIC ANALYSIS METHODS. METHOD FOR DETERMINING MACERAL GROUP COMPOSITION.
UNE 32009:1958 Solid fuels analysis. Determination of the forms of sulphur in coal.
UNE 32014:1962 SOLID FUELS ANALYSIS. PHOSPHORUS DETERMINATION IN ASHES OF COAL AND COKE BY GRAVIMETRIC METHOD.
UNE 64040:1973 MIXED FEEDS AND RAW MATERIALS. ANALYSIS OF VITAMIN A IN AQUEOUS DISPERSIONS.
UNE-EN ISO 19712-1:2013 Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications (ISO 19712-1:2008)
UNE-EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007)
UNE-EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007)
UNE-EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
UNE-EN 14397-1:2010 Fertilizers and liming materials - Determination of carbon dioxide - Part 1: Method for solid fertilizers
UNE-EN 15414-3:2011 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample
UNE-EN 62631-1:2012 Dielectric and resistive properties of solid insulating materials - Part 1: General
UNE 32301:1995 SOLID MINERAL FUELS. PETROGRAPHIC ANALYSIS METHODS. METHOD FOR DETERMINING MICROSCOPICALLY THE REFLECTANCE OF VITRINITE.

农业农村部, Solid Material Composition Analysis

NY/T 2909-2016 Biomass solid pellet fuel quality classification

IN-BIS, Solid Material Composition Analysis

Professional Standard - Aviation, Solid Material Composition Analysis

HB 7615-1998 High performance liquid chromatographic analysis method for composite resin matrix components and pre-curing degree
HB 5421-1998 General rules and general regulations for chemical composition analysis methods of metallic materials
HB/Z 209-1991 Specification for sampling of samples for gas analysis of metallic materials

PL-PKN, Solid Material Composition Analysis

PN G04561-1992 Solid fuels. Determination of nitrogen with the use of the Perkin-Elmer analyser
PN G04560-1992 Solid fuels. Determination of moisture, volatile matter and ash with the use of the LECO automatic analyser
PN G04514-16-1990 Solid fuels Determination of total sulphur and of sulphur in ash with the use of the LECO automatic analyser
PN-EN ISO 21660-3-2021-08 E Solid recovered fuels -- Determination of moisture content using the oven dry method -- Part 3: Moisture in general analysis sample (ISO 21660-3:2021)
PN G04514-17-1993 Solid fuel. Determination of sulphur. Determination of sulphur by using automatic analysers

American Society for Testing and Materials (ASTM), Solid Material Composition Analysis

ASTM E831-12 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E831-13 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E831-14 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E831-06 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E831-05 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E889-82(2004) Standard Test Method for Composition or Purity of a Solid Waste Materials Stream
ASTM E831-00 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E831-19 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM D6866-10 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM E889-82(2009) Standard Test Method for Composition or Purity of a Solid Waste Materials Stream
ASTM E889-82(2014) Standard Test Method for Composition or Purity of a Solid Waste Materials Stream
ASTM G144-01 Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High-Temperature Combustion Analyzer
ASTM D8392-22 Standard Practice for Calibration and Verification of Direct Imaging Analyzers Used for Particle Size and Shape Analysis of Catalytic Materials
ASTM D8049-16a Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM D8072-17 Standard Classification for Reporting Solids and Insoluble Water Contamination of Hydrocarbon-Based Petroleum Products When Analyzed by Imaging Instrumentation
ASTM C1474-19 Standard Test Method for Analysis of Isotopic Composition of Uranium in Nuclear-Grade Fuel Material by Quadrupole Inductively Coupled Plasma-Mass Spectrometry
ASTM D4906-95(2006) Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials
ASTM D4906-95 Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials
ASTM D4906-95(2001) Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials
ASTM D6779-20 Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)
ASTM D5336-15a Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Material
ASTM D8049-19a Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer
ASTM D8049-19 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer
ASTM D8049-21 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer
ASTM E831-03 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM D4067-16 Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods
ASTM D4906-95(2017) Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials
ASTM D4906-95(2023) Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials
ASTM D8049-16 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer

KR-KS, Solid Material Composition Analysis

KS M ISO 21687-2016 Carbonaceous materials used in the production of aluminium－Determination of density by gas pyknometry (volumetric) using helium as the analysis gas－Solid materials
KS E ISO 11726-2018 Solid mineral fuels — Guidelines for the validation of alternative methods of analysis
KS E ISO 687-2022 Solid mineral fuels — Coke — Determination of moisture in the general analysis test sample
KS E ISO 11722-2017 Solid mineral fuels－Hard coal－Determination of moisture in the general analysis test sample by drying in nitrogen
KS E ISO 1213-2-2018 Solid mineral fuels — Vocabulary — Part 2: Terms relating to sampling, testing and analysis
KS E ISO 1213-2-2018(2023) Solid mineral fuels — Vocabulary — Part 2: Terms relating to sampling, testing and analysis
KS C IEC 62631-1-2022 Dielectric and resistive properties of solid insulating materials —Part 1: General
KS B ISO 4384-2-2023 Plain bearings — Hardness testing of bearing metals — Part 2: Solid materials

Taiwan Provincial Standard of the People's Republic of China, Solid Material Composition Analysis

CNS 8862-1982 Glass Materials of Volumeter for Chemical Analysis

工业和信息化部, Solid Material Composition Analysis

SJ/T 10411-2016 Physical analysis method of permanent magnet ferrite materials

CEN - European Committee for Standardization, Solid Material Composition Analysis

PD CEN/TS 15296:2006 Solid Biofuels - Calculation of analyses to different bases
PD CEN/TS 15414-3:2006 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample
EN ISO 13503-1:2005 Petroleum and natural gas industries Completion fluids and materials Part 1: Measurement of viscous properties of completion fluids
PREN 1009-1-2017 Machines for mechanical processing of minerals and similar solid materials - Safety - Part 1: Common requirements for partly completed machinery and processing plants
PD CEN/TS 14778-2:2005 Solid biofuels - Sampling - Part 2: Methods for sampling particulate material transported in lorries
PD CEN/TS 14774-3:2004 Solid biofuels - Methods for the determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample

Professional Standard-Safe Production, Solid Material Composition Analysis

AQ 1089-2011 Polymer material for consolidating coal and rock in mine
AQ/T 1089-2020 Polymer materials for strengthening coal and rock mass in coal mines
AQ/T 1089-2011 Polymer materials for strengthening coal and rock mass in coal mines

UY-UNIT, Solid Material Composition Analysis

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Solid Material Composition Analysis

GB/T 32989-2016 Analytic methods for waste residue mixing amount in wall materials
GB/T 35905-2018 Test methods for biomass—Determination of total solids in biomass
GB/T 35812-2018 Method for analysis of forestry biomass—Determination of insoluble solids following pretreatment

Lithuanian Standards Office , Solid Material Composition Analysis

LST ISO 8358:2002 Solid fertilizers. Preparation of samples for chemical and physical analysis
LST EN 15415-3-2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
LST EN 14397-1-2010 Fertilizers and liming materials - Determination of carbon dioxide - Part 1: Method for solid fertilizers
LST EN 15414-3-2011 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample
LST EN 14774-3-2010 Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample
LST EN 15296-2011 Solid biofuels - Conversion of analytical results from one basis to another
LST EN ISO 12782-4:2012 Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 4: Extraction of humic substances from solid samples (ISO 12782-4:2012)
LST EN ISO 21660-3:2021 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample (ISO 21660-3:2021)

AIAG - Automotive Industry Action Group, Solid Material Composition Analysis

M-19-2009 Materials Off-Shore Sourcing Project: Cost Benefit Analysis (Version 1)

European Committee for Standardization (CEN), Solid Material Composition Analysis

EN ISO 19712-1:2013 Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications
EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes
EN ISO 19712-3:2022 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2022)
EN 15296:2011 Solid biofuels - Conversion of analytical results from one basis to another [Superseded: CEN CEN/TS 15296]
EN ISO 1927-1:2012 Monolithic (unshaped) refractory products - Part 1: Introduction and classification
EN 14397-1:2010 Fertilizers and liming materials - Determination of carbon dioxide - Part 1: Method for solid fertilizers
EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
EN ISO 21660-3:2021 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample (ISO 21660-3:2021)
EN 14774-3:2009 Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample
EN ISO 16993:2015 Solid biofuels - Conversion of analytical results from one basis to another (ISO 16993:2015)
EN ISO 18134-3:2023 Solid biofuels - Determination of moisture content - Part 3: Moisture in general analysis sample (ISO 18134-3:2023)
EN 15414-3:2011 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample
FprEN ISO 18134-3 Solid biofuels - Determination of moisture content - Part 3: Moisture in general analysis sample (ISO/FDIS 18134-3:2023)
EN ISO 13503-1:2011 Petroleum and natural gas industries - Completion fluids and materials - Part 1: Measurement of viscous properties of completion fluids (ISO 13503-1:2011)
EN 6041:2018 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
EN ISO 18134-3:2015 Solid biofuels - Determination of moisture content - Oven dry method Part 3: Moisture in general analysis sample
EN ISO 16993:2016 Solid biofuels - Conversion of analytical results from one basis to another

Danish Standards Foundation, Solid Material Composition Analysis

DS/EN ISO 19712-1:2013 Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications
DS/EN ISO 19712-3:2013 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes
DS/EN ISO 19712-2:2013 Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods
DS/ISO 687:2010 Solid mineral fuels - Coke - Determination of moisture in the general analysis test sample
DS/ISO 21660-3:2021 Solid recovered fuels – Determination of moisture content using the oven dry method – Part 3: Moisture in general analysis sample
DS/EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
DS/EN ISO 12782-4:2012 Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 4: Extraction of humic substances from solid samples
DS/EN 14397-1:2010 Fertilizers and liming materials - Determination of carbon dioxide - Part 1: Method for solid fertilizers
DS/EN 15414-3:2011 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample
DS/EN 12049:1997 Solid fertilizers and liming materials - Determination of moisture content - Gravimetric method by drying under reduced pressure
DS/EN ISO 22940:2021 Solid recovered fuels – Determination of elemental composition by X-ray fluorescence (ISO 22940:2021)
DS/EN 62631-1:2011 Dielectric and resistive properties of solid insulating materials - Part 1: General
DS/EN 14774-3:2010 Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample
DS/EN 15296:2011 Solid biofuels - Conversion of analytical results from one basis to another
DS/EN ISO 21660-3:2021 Solid recovered fuels – Determination of moisture content using the oven dry method – Part 3: Moisture in general analysis sample (ISO 21660-3:2021)

ES-UNE, Solid Material Composition Analysis

UNE-EN ISO 19712-3:2022 Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2022)
UNE-EN ISO 22940:2022 Solid recovered fuels - Determination of elemental composition by X-ray fluorescence (ISO 22940:2021)
UNE-EN ISO 18134-3:2016 Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample (ISO 18134-3:2015)
UNE-EN ISO 12782-4:2012 Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 4: Extraction of humic substances from solid samples (ISO 12782-4:2012) (Endorsed by AENOR in July of 2012.)
UNE-EN ISO 21660-3:2021 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample (ISO 21660-3:2021)
UNE-EN ISO 16993:2017 Solid biofuels - Conversion of analytical results from one basis to another (ISO 16993:2016)
UNE-EN 6041:2018 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC) (Endorsed by Asociación Española de Normalización in March of 2018.)
UNE-EN 6064:2017 Aerospace series - Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC) (Endorsed by Asociación Española de Normalización in February of 2018.)

VN-TCVN, Solid Material Composition Analysis

TCVN 4919-2007 Solid mineral fuels.Coke.Determination of moisture in the general analysis test sample

HU-MSZT, Solid Material Composition Analysis

MSZ 516/3-1980

American National Standards Institute （ANSI), Solid Material Composition Analysis

ANSI/ASTM D3850:2012 Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials by Thermogravimetric Method (TGA)
BS EN ISO 18134-3:2023 Solid biofuels. Determination of moisture content Moisture in general analysis sample (British Standard)

PT-IPQ, Solid Material Composition Analysis

NP 3539-1987
NP 1014-1987
NP 1011-1989 SOLID FUELS Coals Determination of moisture in the analysis sample Direct gravimetric method ISO method
NP 3755-2-1989 SOLID FUELS Cokes Size analysis. Part 2: Nominal top size greater than 20 mm
NP 4409-2002 Animal feeding stuffs Determination of furazolidone content Method using high-performance liquid chromatography
NP 4382-1999 Solid fuels. Coals and coke. Determination of ash content(ASTM method)
NP 3755-1-1999 Solid fuels.Cokes.Size analysis.Part 1:Particle size 20mm or less
NP 3862-1999 Solid fuels. Medium and High-Rank coals. Size analysis by sieving
NP 3862-1-2001 Solid fuels Médium and High-Rank coals Size analysis by sieving
NP 3755-1-1989 SOLID FUELS Cokes Size analysis. Part 1: Nominal top size 20 mm or less
NP 4373-1999 Solid fuels.Coals.Determination of total moisture by the indirect gravimetric method(ASTM method)
NP 4323-1999 Solid fuels.Coals.Determination of total moisture by the indirect gravimetric method(ISO method)
NP ISO 3233:2000 Paints and varnishes Determination of percentage volume of non-volatile matter by measuring the density of a dried coating

IT-UNI, Solid Material Composition Analysis

UNI 5612-1965
UNI 3681-1955
UNI 7340-1974
UNI 7408-1975
UNI EN ISO 21660-3:2021 Solid recovered fuels — Determination of moisture content using the oven dry method — Part 3: Moisture in general analysis sample
UNI 3691-1955
UNI 3496-1954
UNI 3675-1955
UNI 3713-1956
UNI 3674-1955
UNI 3370-1953
UNI 3711-1956
UNI 4229-1959
UNI 7411-1975

US-FCR, Solid Material Composition Analysis

FCR 40 CFR PART 241-2011 SOLID WASTES USED AS FUELS OR INGREDIENTS IN COMBUSTION UNITS
FCR 40 CFR PART 241-2014 SOLID WASTES USED AS FUELS OR INGREDIENTS IN COMBUSTION UNITS
FCR 40 CFR PART 241-2015 SOLID WASTES USED AS FUELS OR INGREDIENTS IN COMBUSTION UNITS

ZA-SANS, Solid Material Composition Analysis

SANS 15239:2006 Solid mineral fuels - Evaluation of the measurement performance of on-line analysers
SANS 626-2:2007 Solid mineral fuels - Vocabulary Part 2: Terms relating to sampling, testing and analysis
SANS 11722:2005 Solid mineral fuels - Hard coal - Determination of moisture in the general analysis test sample by drying in nitrogen
SANS 4384-2:2005 Plain bearings - Hardness testing of bearing metals Part 2: Solid materials

ANSI - American National Standards Institute, Solid Material Composition Analysis

N15.22-1975 CALIBRATION TECHNIQUES FOR THE CALORIMETRIC ASSAY OF PLUTONIUM- BEARING SOLIDS APPLIED TO NUCLEAR MATERIALS CONTROL; CORRECTION - FEBRUARY 1977 (INMM)

Professional Standard - Aerospace, Solid Material Composition Analysis

QJ 2136.1-1991 Physical and chemical re-examination samples of metal materials stipulated chemical composition analysis samples

Standard Association of Australia （SAA）, Solid Material Composition Analysis

ISO 18134-3:2023 Solid biofuels — Determination of moisture content — Part 3: Moisture in general analysis sample

Professional Standard - Medicine, Solid Material Composition Analysis

YY/T 0818.1-2010 Guide for silicone elastomers, gels and forms used in medical applications.Part 1：Formulation and uncured materials

Group Standards of the People's Republic of China, Solid Material Composition Analysis

T/CNIA 0143-2022 Ultrapure Resin Vessels for Trace Impurity Analysis of Semiconductor Materials
T/SCSVA 0002.1-2023 "Construction and Acceptance of Sports Venues" Part 1: Synthetic Material Surface

International Electrotechnical Commission (IEC), Solid Material Composition Analysis

IEC TS 62607-6-19:2021 Nanomanufacturing - Key control characteristics - Part 6-19: Graphene-based material - Elemental composition: CS analyser, ONH analyser
IEC 62631-1:2011 Dielectric and resistive properties of solid insulating materials - Part 1: General

Association of German Mechanical Engineers, Solid Material Composition Analysis

VDI 3795 Blatt 1-1978 Determination of air pollution components in biological material; determination of fluorides in biological material and IRMA-solutions; photometric analysis
VDI 3822 Blatt 2.1.3-2012 Failure analysis - Defects of thermoplastic products made of plastics caused by an unfavourable choice of material and by defects in the material

BE-NBN, Solid Material Composition Analysis

NBN M 02-006-1975 - Solid Minerai fuels : Size analysis of coKe

TR-TSE, Solid Material Composition Analysis

TS 1372-1973 Vocabulary Of Terms Relating To Solid Mineral Tnels PARTII Terms Relating To Coal Sampling And Analysis

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Solid Material Composition Analysis

PREN 6040-1995 Aerospace Series Non-Metallic Materials Test Method Analysis of Thermoset Systems by High Performance Liquid Chromatography (HPLC) (Edition P1)
PREN 6041-1995 Aerospace Series Non-Metallic Materials Test Method Analysis of Non-Metallic Materials (Uncured) by Differential Scanning Calorimetry (DSC) (Edition P1)
PREN 6064-1995 Aerospace Series Non-Metallic Materials Analysis of Non-Metallic Materials (Cured) for the Determination of the Extent of Cure by Differential Scanning Calorimetry (DSC) (Edition P1)

CH-SNV, Solid Material Composition Analysis

SN EN ISO 22940:2021 Solid recovered fuels - Determination of elemental composition by X-ray fluorescence (ISO 22940:2021)
SN EN ISO 21660-3:2021 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample (ISO 21660-3:2021)

未注明发布机构, Solid Material Composition Analysis

BS EN 62631-1:2011(2016) Dielectric and resistive properties of solid insulating materials Part 1 : General

工业和信息化部/国家能源局, Solid Material Composition Analysis

JB/T 12928-2016 Pressure wave test method for space charge distribution in solid insulating materials
JB/T 12927-2016 Electroacoustic pulse test method for space charge distribution in solid insulating materials

ES-AENOR, Solid Material Composition Analysis

UNE 84-064-1987

Professional Standard - Machinery, Solid Material Composition Analysis

JB/T 8063.1-2011 Methods for chemical analysis of powder metallurgy materials and products.Part 1:The gas volumetric method for the determination of carbon in iron-based materials and products
JB/T 8063.1-1996 Method for chemical analysis of powder metallurgy materials and products Determination of carbon in iron-based materials and products (gas volumetric method)

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Solid Material Composition Analysis

ASHRAE NY-08-016-2008 Exergy Analysis of a SOFC-Based Cogeneration System for Buildings

SE-SIS, Solid Material Composition Analysis

SIS SS 02 84 26-1991 Air quality — Stationary source emissions — Determination of concentration and mass flow rate of particulate material in gas-carrying ducts — Manual gravimetric metod

Anhui Provincial Standard of the People's Republic of China, Solid Material Composition Analysis

DB34/T 2334-2015 Test method for safety performance of polymer materials used in coal mines to strengthen coal and rock mass

国家能源局, Solid Material Composition Analysis

NB/T 51069-2017 Test method for thermal safety performance of polymer materials used in coal mine reinforcement of coal and rock mass

AT-ON, Solid Material Composition Analysis

OENORM EN ISO 21660-3:2021 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample (ISO 21660-3:2021)

Canadian Standards Association (CSA), Solid Material Composition Analysis

CAN/CSA-ISO 18134-3:2015 Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample (First Edition)