ZH
RU
ES
Methods for the Analysis of Solid Materials
Methods for the Analysis of Solid Materials, Total:499 items.
In the international standard classification, Methods for the Analysis of Solid Materials involves: Plastics, Mechanical testing, Fuels, Magnetic materials, Coals, Construction materials, Insulating materials, Non-ferrous metals, Electronic components in general, Products of the chemical industry, Particle size analysis. Sieving, Insulating fluids, Fertilizers, Farming and forestry, Analytical chemistry, Welding, brazing and soldering, Shipbuilding and marine structures in general, Electricity. Magnetism. Electrical and magnetic measurements, Paints and varnishes, Inorganic chemicals, Air quality, Ferroalloys, Iron and steel products, Lubricants, industrial oils and related products, Components for electrical equipment, Testing of metals, Equipment for the chemical industry, Nuclear energy engineering, Measurement of volume, mass, density, viscosity, Products of the textile industry, Refractories, Leather technology, Ceramics, Wastes, Ferrous metals, Radiation measurements, Protection against fire, Materials for aerospace construction, Optics and optical measurements, Non-metalliferous minerals, Powder metallurgy, Burners. Boilers, Glass, Metalliferous minerals, Electrical accessories, Seals, glands, Road vehicles in general.
Malaysia Standards, Methods for the Analysis of Solid Materials
- MS 1466-1999 Method of test for linear thermal expansion of solid materials by thermomechanical analysis
American Society for Testing and Materials (ASTM), Methods for the Analysis of Solid Materials
- ASTM E831-12 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
- ASTM E831-13 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
- ASTM E831-06 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
- ASTM E831-05 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
- ASTM E831-14 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
- ASTM E831-00 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
- ASTM E831-19 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
- ASTM E870-82(2006) Standard Test Methods for Analysis of Wood Fuels
- ASTM D3289-17(2022) Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method)
- ASTM D3289-17 Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method)
- ASTM D4359-90(2000)e1 Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
- ASTM D4359-90(2019) Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
- ASTM E870-82(1998)e1 Standard Test Methods for Analysis of Wood Fuels
- ASTM E870-82(2019) Standard Test Methods for Analysis of Wood Fuels
- ASTM E870-82(2013) Standard Test Methods for Analysis of Wood Fuels
- ASTM D8339-20 Standard Test Method for The Analysis of Flue Gas Desulfurization Solids by Macro Thermogravimetric Analysis
- ASTM D374-99 Standard Test Methods for Thickness of Solid Electrical Insulation
- ASTM D374-99(2004) Standard Test Methods for Thickness of Solid Electrical Insulation
- ASTM D2883-95(2009) Standard Test Method for Reaction Threshold Temperature of Liquid and Solid Materials
- ASTM G134-17(2023) Standard Test Method for Erosion of Solid Materials by Cavitating Liquid Jet
- ASTM D1921-01 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
- ASTM D1921-96 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
- ASTM D1921-06 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
- ASTM D1921-18 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
- ASTM E831-03 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
- ASTM D3108-07 Standard Test Method for Coefficient of Friction, Yarn to Solid Material
- ASTM D3108/D3108M-13 Standard Test Method for Coefficient of Friction, Yarn to Solid Material
- ASTM D2883-95(2005) Standard Test Method for Reaction Threshold Temperature of Liquid and Solid Materials
- ASTM C914-09(2022) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
- ASTM C914-09(2022)e1 Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
- ASTM D2883-95(2000)e1 Standard Test Method for Reaction Threshold Temperature of Liquid and Solid Materials
- ASTM G134-95 Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
- ASTM D2883-95 Standard Test Method for Reaction Threshold Temperature of Liquid and Solid Materials
- ASTM G134-17 Standard Test Method for Erosion of Solid Materials by Cavitating Liquid Jet
- ASTM D4906-95(2006) Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials
- ASTM D4906-95 Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials
- ASTM D4906-95(2001) Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials
- ASTM D4874-95(2001) Standard Test Method for Leaching Solid Material in a Column Apparatus
- ASTM D374M-99(2005) Standard Test Methods for Thickness of Solid Electrical Insulation (Metric)
- ASTM D3108-01 Standard Test Method for Coefficient of Friction, Yarn to Solid Material
- ASTM D3108-95 Standard Test Method for Coefficient of Friction, Yarn to Solid Material
- ASTM D4874-95 Standard Test Method for Leaching Solid Material in a Column Apparatus
- ASTM D3108/D3108M-13(2020) Standard Test Method for Coefficient of Friction, Yarn to Solid Material
- ASTM D374M-13 Standard Test Methods for Thickness of Solid Electrical Insulation (Metric)
- ASTM D310-88 Standard test method for coefficient of friction between yarn and solid materials
- ASTM D4906-95(2017) Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials
- ASTM D4906-95(2023) Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials
- ASTM E662-21ae1 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
- ASTM E3277-21 Standard Test Method for Determining Whether a Material is a Liquid or a Solid by Rheometry
- ASTM E3277-22 Standard Test Method for Determining Whether a Material is a Liquid or a Solid by Rheometry
- ASTM E662-13 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
- ASTM E662-12 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
- ASTM E662-14 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
- ASTM E662-15a Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
- ASTM E662-13a Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
- ASTM E662-13b Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
- ASTM E662-12a Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
- ASTM D1389-97a Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
- ASTM D1389-97a(2004) Standard Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
- ASTM G134-95(2006) Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
- ASTM D4906-95(2012) Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials
- ASTM C914-95(2004) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
- ASTM C914-09 Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
- ASTM C914-09(2015) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
- ASTM C914-95(1999) Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
- ASTM C429-01(2011) Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture
- ASTM D6406-99(2014) Standard Test Method for Analysis of Sugar in Vegetable Tanning Materials
- ASTM D1921-12 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
- ASTM D1921-06e1 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
- ASTM E662-03e2 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
- ASTM E662-03e1 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
- ASTM E662-03 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
- ASTM E662-01 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
- ASTM E662-97 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
- ASTM E662-21 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
- ASTM E662-06e1 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
- ASTM G134-95(2001)e1 Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
- ASTM G134-95(2010)e1 Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet
- ASTM D6343-99(2004) Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications
- ASTM D6343-99 Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications
- ASTM F2378-05(2023) Standard Test Method for Sealability of Sheet, Composite, and Solid Form-in-Place Gasket Materials
- ASTM D6406-99 Standard Test Method for Analysis of Sugar in Vegetable Tanning Materials
- ASTM D6406-99(2004) Standard Test Method for Analysis of Sugar in Vegetable Tanning Materials
- ASTM D6406-99(2009) Standard Test Method for Analysis of Sugar in Vegetable Tanning Materials
- ASTM D6406-99(2020) Standard Test Method for Analysis of Sugar in Vegetable Tanning Materials
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Methods for the Analysis of Solid Materials
- GB/T 28731-2012 Proximate analysis of solid biofuels
- GB/T 4298-1984 The activation analysis method for the determination of elemental impurities in semiconductor silicon materials
- GB/T 10064-1988 Methods of test for the determination of the insulation resistance of solid insulating materials
- GB/T 10671-1989 Test method for specific optical density of smoke generated by solid materials
- GB/T 10671-2023 Specific optical density test method for smoke production from solid materials
- GB/T 10671-2008 Test method for specific optical density of smoke generated by solid materials
- GB/T 27803-2011 Analysis method for solid composition releasing chorine dioxide
- GB/T 11436-1989 Chemical analysis methods for products and semifinished products made of soft ferrite materials
- GB/T 11436-2012 Chemical analysis methods for products and semi-finished products made of soft ferrite materials
- GB/T 32496-2016 Test method for volume fraction of reinforcement in metal matrix composites.Image analysis method
- GB/T 10064-2006 Methods of test for the determination of the insulation resistance of solid insulating materials
- GB/T 21650.3-2011 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption.Part 3:Analysis of micropores by gas adsorption
- GB/T 5070-2015 Chemical analysis of refractories containing chrome
- GB/T 6901-2008 Chemical analysis of silica refractories
- GB/T 4984-2007 Chemical analysis of refractories containing zirconia
- GB/T 5070-2007 Chemical analysis of refractories containing chrome
- GB/T 42741-2023 Method for measuring electromagnetic parameters of solid materials using the free-space method
- GB/T 21650.2-2008 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption.Part 2: Analysis of mesopores and macropores by gas adsorption
- GB/T 5069-2015 Chemical analysis of magnesia-alumina refractories
- GB/T 4734-1996 Methods of chemical analysis for ceramic materials and articles
- GB/T 14350-1993 Chemical analysis methods for zircon refractories
- GB/T 6900-2006 Chemical analysis of alumina-silica refractories
- GB/T 5069-2007 Chemical analysis of magnesia-alumina refractories
- GB/T 6900-2016 Chemical analysis of alumina-silica refractories
- GB/T 4984-1985 Chemical analysis methods of zirconia-alumina refractories
- GB/T 14415-1993 Analysis of water used in boiler and cooling system. Determination of solids matter
- GB/T 16555.2-1996 Chemical analysis for silicon carbide refractories--Determination of silicon carbide--Gas volumetric method
- GB/T 16555.3-1996 Chemical analysis for silicon carbide refractories--determination of free silicon--Gas volumetric method
- GB/T 1408.1-1999 Methods of test for electric strength of solid insulating materials Tests at power frequencies
SE-SIS, Methods for the Analysis of Solid Materials
- SIS SS 404 09 24-1992 Solid insulating materials - Methods of test for electric strength of solid insulating materials
- MNC 375-1992 Metarlic materials — Testing — Methods for chemical analysis — Summary
- SIS SS IEC 343:1982 Recommended test methods for determining the relative resistance of insulating materials to break-down by surface discharges
Professional Standard - Electron, Methods for the Analysis of Solid Materials
- SJ/T 11075-1996 Methods for chemical analysis of raw materials used in ferrites
- SJ/T 10411-2002 Physical analysis methods for permanent ferrite materials
- SJ/T 10411-1993 Physical analysis method of permanent ferrite material
- SJ/Z 3206.13-1989 General rules for emision spectrum analysis for semiconductor materials
- SJ/T 1505-1997 Chemical analysis methods for products and semifinished products made of gyromagnetic ferrite materials
RU-GOST R, Methods for the Analysis of Solid Materials
- GOST 33503-2015 Solid mineral fuel. Methods for determination of moisture in the analysis sample
- GOST R 52917-2008 Solid mineral fuels. Methods for determination of moisture in the analysis test sample
- GOST R ISO 21687-2014 Carbonaceous materials for the production of aluminium. Determination of density by gas pyknometry (volumetric) using helium as the analysis gas. Solid materials
- GOST EN 12048-2013 Solid fertilizers and liming materials. Determination of moisture content. Gravimetric method by drying at (105 ± 2) °C
- GOST R 50344-1992 Solid insulating materials. Methods of the determination of the insulation resistance
- GOST 11930.0-1979 Hard-facind materials. General requirements for methods of analysis
- GOST R 57697-2017 Polymer composites. Method for determination of curing properties of pultrusion resins by thermal analysis
- GOST R 54218-2010 Solid biofuels. Sampling. Part 2. Methods for sampling particulate material transported in lorries
- GOST R 52911-2008 Solid mineral fuels. Methods for determination of total moisture
- GOST 2642.0-2014 Refractories and refractory raw materials. General requirements for methods of analysis
- GOST 2642.0-1986 Refractories and refractory raw materials. General requiremetns for methods of analysis
- GOST R 55552-2013 Solid recovered fuels. Determination of particle size distribution. Part 3. Method by image analysis for large dimension particles
- GOST R 55129-2012 Solid recovered fuels-14C-based methods for the determination of the biomass content
- GOST 26318.0-1984 Non-metallic ore materials. General requirements for methods of analysis
- GOST R 54245-2010 Solid mineral fuel. Calculation of analyses to different bases
- GOST 33623-2015 Solid mineral fuel. Method for determination of equilibrium moisture
- GOST R 54224-2010 Solid recovered fuels. Determination of ash content
- GOST 22023-1976 Building materials. Method of microscopical quantative structure analysis
工业和信息化部, Methods for the Analysis of Solid Materials
- SJ/T 10411-2016 Physical analysis method of permanent magnet ferrite materials
Korean Agency for Technology and Standards (KATS), Methods for the Analysis of Solid Materials
- KS L 5300-2009 Determination of asbestos in bulk material
- KS E ISO 11726:2018 Solid mineral fuels — Guidelines for the validation of alternative methods of analysis
- KS C 2105-2003 Testing methods for electric strengthof solid insulating materials
- KS C 2105-1982 Testing methods for electric strengthof solid insulating materials
- KS M ISO 21687-2016(2021) Carbonaceous materials used in the production of aluminium－Determination of density by gas pyknometry (volumetric) using helium as the analysis gas－Solid materials
- KS D 2607-2005 Methods for chemical analysis of tungsten materials
- KS D 2607-1993 Methods for chemical analysis of tungsten materials
- KS D 2607-2015 Methods for chemical analysis of tungsten materials
- KS D 2608-2005 Methods for chemical analysis of molybdenum materials
- KS D 2608-1993 Methods for chemical analysis of molybdenum materials
- KS D 2608-2015 Methods for chemical analysis of molybdenum materials
- KS D 2607-2020 Methods for chemical analysis of tungsten materials
- KS D 2608-2020 Methods for chemical analysis of molybdenum materials
- KS M ISO 21687:2011 Carbonaceous materials used in the production of aluminium-Determination of density by gas pyknometry (volumetric) using helium as the analysis gas-Solid materials
- KS M ISO 21687:2016 Carbonaceous materials used in the production of aluminium－Determination of density by gas pyknometry (volumetric) using helium as the analysis gas－Solid materials
- KS D 2000-2012 Methods for chemical analysis of silver brazing filler metals
- KS D 2006-2009 Methods for chemical analysis of nickel brazing filler metals
- KS D 2609-1993 Methods for chemical analysis of thoriated tungsten materials
- KS D 2609-2013 Methods for chemical analysis of thoriated tungsten materials
- KS D 2006-1984 Methods for chemical analysis of nickel brazing filler metals
- KS E ISO 11726:2007 Solid mineral fuels－Guidelines for the validation of alternative methods of analysis
- KS D 2589-2005 Methods for chemical analysis of gold brazing filler metals
- KS D 1790-2003 Method of chemical analysis for nickel chromium electric heating material
- KS D 1838-2009 Methods of chemical analysis for iron chromium electric heating material
- KS D 2005-2009 Methods for chemical analysis of brass brazing filler metals
- KS D 2007-1991 Methods for chemical analysis of copper phosphorus brazing filler metals
- KS D 1963-2009 Methods for chemical analysis of copper nickel resistance material
- KS D 1963-2009(2019) Methods for chemical analysis of copper nickel resistance material
- KS C 2105-2003(2018)
- KS C 2004-1998 TEST METHOD FOR THE PROOF TRACKING INDICES OF SOLID ELECTRICAL INSULATING MATERIALS
- KS C 2005-1998 TEST METHOD FOR INSULATION RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS
- KS D 1790-2018 Method of chemical analysis for nickel chromium electric heating material
- KS B 0539-2005 Methods for chemical analysis of palladium brazing filler metals
- KS D 2609-2008 Methods for chemical analysis of thoriated tungsten materials
- KS C IEC 60167-2002(2012) Methods of test for the determination of the insulation resistance of solid insulating materials
- KS C 2127-1996(2021) Testing method for proof-voltage testing of thin solid electrical insulating materials
- KS C IEC 60167:2002 Methods of test for the determination of the insulation resistance of solid insulating materials
- KS C 2005-2003 TEST METHOD FOR INSULATION RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS
- KS C IEC 60167:2017 Methods of test for the determination of the insulation resistance of solid insulating materials
- KS B 5361-2008(2018) Emissivity measuring methods for industrial solid materials
- KS L 3410-2010 Chemical analysis for highly purity graphite materials
- KS L 3410-2015 Chemical analysis for highly purity graphite materials
- KS D 1790-1993 Methods of chemical analysis for nickel chromium electric heating material
- KS D 1838-2014 Methods of chemical analysis for iron chromium electric heating material
- KS B ISO 10564:2005 Soldering and brazing materials－Methods for the sampling of soft solders for analysis
- KS D 2010-2003 Methods for chemical analysis of white metal
- KS L 3523-2006(2021) Testing methods for sieve analysis and water content of refractory materials
- KS D 1944-1974(2000) METHOD FOR CHEMICAL ANALYSIS OF TUNGSTEN AND MOLYBDENUM MATERIALS FOR ELECTRIC LAMPS AND TUBES
- KS D 1838-2019 Methods of chemical analysis for iron chromium electric heating material
- KS D 1944-1985 METHOD FOR CHEMICAL ANALYSIS OF TUNGSTEN AND MOLYBDENUM MATERIALS FOR ELECTRIC LAMPS AND TUBES
- KS C 2004-2003 TEST METHOD FOR THE PROOF TRACKING INDICES OF SOLID ELECTRICAL INSULATING MATERIALS
- KS D 2052-1999(2004) METHODS FOR CHEMICAL ANALYSIS OF TUNGSTEN AND MOLYBDENUM ALLOY MATERIALS
- KS M 3536-1999
- KS C IEC 60093:2014 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
- KS C IEC 60112:2017 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
- KS C IEC 60112:2022 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
- KS L 5206-1999 Chemical analysis of aluminous cement for refractories
- KS L 5208-2006 Chemical analysis of chrome ore for refractories
- KS D 1650-2008 General rules for photoelectric emission spectrochemical analysis of metal materials
British Standards Institution (BSI), Methods for the Analysis of Solid Materials
- BS DD CEN/TS 15296:2006 Solid biofuels - Calculation of analyses to different bases
- BS ISO 21687:2007 Carbonaceous materials used in the production of aluminium - Determination of density by gas pyknometry (volumetric) using helium as the analysis gas - Solid materials
- BS 5551-2.8:1991 Fertilizers. Sampling. Methods for preparation of samples of solid fertilizer for chemical and physical analysis
- BS ISO 11726:2005 Solid mineral fuels - Guidelines for the validation of alternative methods of analysis
- BS DD CEN/TS 14774-3:2004 Solid biofuels - Methods for the determination of moisture content - Oven dry method - Moisture in general analysis sample
- BS 1902 Sec.2.2:1974 Methods of testing refractory materials. Chemical analysis (wet methods). Chemical analysis of chrome-bearing materials
- BS ISO 11726:2017 Tracked Changes. Solid mineral fuels. Guidelines for the validation of alternative methods of analysis
- BS DD CEN/TS 15406:2006 Solid recovered fuels. Methods for the determination of bridging properties of bulk materials
- DD CEN/TS 15406:2006 Solid recovered fuels — Methods for the determination of bridging properties of bulk material
- BS 5551-4.5:1993 Fertilizers. Chemical analysis. Method for determination of mineral-acid-soluble sulfate content of solid fertilizers
- BS 5551 Sec.4.5:1993 Fertilizers. Chemical analysis. Method for determination of mineral-acid-soluble sulfate content of solid fertilizers
- BS 5551 Sec.2.8:1991 Fertilizers. Sampling. Methods for preparation of samples of solid fertilizer for chemical and physical analysis
- BS 1902 Sec.9.1:1987 Methods of testing refractory materials. Chemical analysis by instrumental methods. Analysis of alumino-silicate refractories by X-ray fluorescence
- BS ISO 15901-3:2007 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption. Analysis of micropores by gas adsorption
- DD CEN/TS 15403:2006 Solid recovered fuels — Methods for the determination of ash content
- DD CEN/TS 15296:2006 Solid Biofuels — Calculation of analyses to different bases
- BS DD CEN/TS 14775:2004 Solid biofuels - Method for the determination of ash content
- BS DD CEN/TS 15403:2006 Solid recovered fuels - Methods for the determination of ash content
- DD CEN/TS 14775:2004 Solid biofuels - Method for the determination of ash content
- BS ISO 15901-2:2022 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Analysis of nanopores by gas adsorption
- BS EN 15414-3:2011 Solid recovered fuels. Determination of moisture content using the oven dry method. Moisture in general analysis sample
- DD CEN/TS 14774-3:2004 Solid biofuels - Methods for the determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample
- BS ISO 15901-2:2006(2007) Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Analysis of mesopores and macropores by gas adsorption
- BS ISO 15901-2:2007 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Analysis of mesopores and macropores by gas adsorption
- BS 6233:1982 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
- BS DD CEN/TS 15401:2006 Solid recovered fuels - Methods for the determination of bulk density
- BS DD CEN/TS 15401:2010 Solid recovered fuels - Determination of bulk density
- BS 1902 Sec.9.2:1987 Methods of testing refractory materials. Chemical analysis by instrumental methods. Analysis of silica refractories by X-ray fluorescence
- DD ISO/TS 12902:2002 Solid mineral fuels. Determination of total carbon, hydrogen and nitrogen. Instrumental methods
- BS EN IEC 62631-3-11:2018 Dielectric and resistive properties of solid insulating materials - Determination of resistive properties (DC methods). Volume resistance and volume resistivity. Method for impregnation and coating materials
CZ-CSN, Methods for the Analysis of Solid Materials
- CSN 44 1358-1976 Analysis of solid fuel ash
- CSN 34 6468-1990 Test methods of solid insulating materials. Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions
- CSN 44 1308-1996 Solid minerál fuels. Sampling from stockpiles for size analysis
- CSN 44 1377 Z1-1995
- CSN IEC 167:1993 Methods of test for the determination of the insultation resistance of solid insultating materials
- CSN 34 6460-1983 Methods of test for the determination of the d. c. insulation resistance of solid insulating materials
American National Standards Institute （ANSI), Methods for the Analysis of Solid Materials
- ANSI/ASTM D3850:2012 Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials by Thermogravimetric Method (TGA)
- ANSI/ASTM D374M:2013 Test Methods for Thickness of Solid Electrical Insulation (Metric)
- ANSI/ASTM D1389:2007 Test Method for Proof-Voltage Testing of Thin Solid Electrical Insulating Materials
- ANSI/ASTM E662a:2013 Test Method for Specific Optical Density of Smoke Generated by Solid Materials
- ANSI/ASTM E662b:2013 Test Method for Specific Optical Density of Smoke Generated by Solid Materials
- ANSI/ASTM E662c:2013 Test Method for Specific Optical Density of Smoke Generated by Solid Materials
- ANSI/ASTM E662 REV A:2021 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Methods for the Analysis of Solid Materials
- GB/T 32989-2016 Analytic methods for waste residue mixing amount in wall materials
- GB/T 35905-2018 Test methods for biomass—Determination of total solids in biomass
- GB/T 6901-2017 Chemical analysis of silica refractories
- GB/T 35812-2018 Method for analysis of forestry biomass—Determination of insoluble solids following pretreatment
Japanese Industrial Standards Committee (JISC), Methods for the Analysis of Solid Materials
- JIS H 1403:1987 Methods for chemical analysis of tungsten materials
- JIS H 1404:1987 Methods for chemical analysis of molybdenum materials
- JIS H 1403:2001 Methods for chemical analysis of tungsten materials
- JIS H 1404:2001 Methods for chemical analysis of molybdenum materials
- JIS Z 8831-3:2010 Pore size distribution and porosity of solid materials -- Part 3: Analysis of micropores by gas adsorption
- JIS H 1405:1987 Methods for chemical analysis of thoriated tungsten materials
- JIS C 2140:2009 Solid electrical insulating materials -- Methods of determination of the insulation resistance
- JIS Z 8831-2:2010 Pore size distribution and porosity of solid materials -- Part 2: Analysis of mesopores and macropores by gas adsorption
- JIS H 1401:1987 Methods for chemical analysis of tungsten and molybdenum alloy materials
- JIS H 1413:1996 Methods of chemical analysis for copper nickel resistance material
- JIS C 2110:1994 Testing methods for electric strength of solid insulating materials
- JIS H 1411:1996 Methods of chemical analysis for iron chromium electric heating material
- JIS H 1412:1996 Methods of chemical analysis for nickel chromium electric heating material
- JIS R 2901:1994 Methods for chemical analysis of chrome ores for refractories
- JIS H 1405:2001 Methods for chemical analysis of thoriated tungsten materials
- JIS H 1405:2016 Methods for chemical analysis of thoriated tungsten materials
- JIS R 2014:1998 Methods for chemical analysis of refractories containing alumina and magnesia
KR-KS, Methods for the Analysis of Solid Materials
- KS E ISO 11726-2018 Solid mineral fuels — Guidelines for the validation of alternative methods of analysis
- KS M ISO 21687-2016 Carbonaceous materials used in the production of aluminium－Determination of density by gas pyknometry (volumetric) using helium as the analysis gas－Solid materials
- KS B 5361-2008(2023) Emissivity measuring methods for industrial solid materials
- KS C IEC 60093-2014 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
- KS C IEC 60112-2022 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
- KS C IEC 60112-2017 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
Professional Standard - Aviation, Methods for the Analysis of Solid Materials
- HB 7615-1998 High performance liquid chromatographic analysis method for composite resin matrix components and pre-curing degree
- HB/Z 112-1986 Statistical Analysis Method for Material Fatigue Test
RO-ASRO, Methods for the Analysis of Solid Materials
- STAS 10289-1982 Solid electroinsulating materials THERMOSETTING LAMINATED MATERIALS Test methods
- STAS 1883-1974 TANNING MATERIALS Sampling and methods ol analysis
- STAS 10274/1-1983 Solid fuels ASH ANALYSIS General directions for spectral and chemical analysis carrying out
- STAS 12065-1982 Solid electrical insulating materials CONBINED FLEXIBLE MATERIALS Methods of test
- STAS 10274/10-1975 SOLID FUELS ASH ANALYSIS Delermination of vanadium
- STAS 10274/12-1975 SOLID FUELS ASH ANALYSIS Delermination of barium
- STAS 10274/4-1990 Solid fuels ASH ANALYSIS Iron determination
- STAS 10274/5-1975 SOLID FUELS ASH ANALYSIS Determination of aluminium
- STAS 10274/6-1988 Solid fuels ASH ANALYSIS Titamum determination
- STAS 10274/9-1989 Solid fuels ASH ANALYSIS Manganese determination
- STAS 166/1-1972 SILICA-ALUMINA REFRACTOP.IES Mcthods of analysis General indications for carrying out the analysis
- STAS 6257-1980 SOLID ELECTROINSULATING MATERIALS Methods of test for electric strength
- STAS 10274 17-1975 SOLID FUELS ASH ANALYSIS Determination of the loss on ignition
- STAS 10274/11-1975 SOLID FURLS ASH ANALYSIS Determination of sulphur
- STAS 10274/14-1975 SOLID FUELS ASH ANALYSIS Determination of phosphorus corlent
- STAS 10274/16-1975 SOLID FUELS ASH ANALYSIS Determination of carbon content
- STAS E 12267-1984 SOLID ELECTRICAL INSULATING MATERIALS Methods of test for the delt rminalion of the flammability in Llic case of exposure In an igniting source
- STAS 10274/18-1975 SOLID FUELS ASH ANALYSIS Determination of hygroscopic moisture
- STAS 10274/3-1988 Solid fuels ASH ANALYSIS Silicon dioxide determination
- STAS 12149/1-1982 Solid electrical insulating materials MEASUREMENT OF THE EFFECTS OF IONIZING RADIATION ON INSULATING MATERIALS General prescriptionsX
- STAS 10368-1982 SOLID ELECTRICAL INSULATING MATERIALS Test methods for determining the electrolytic corrosion of metals in the presence of electrical insulating materials
- STAS SR ISO 10564:1995 Soldering and brazing materials. Methods for the sampling of soft solders for analysis
AENOR, Methods for the Analysis of Solid Materials
- UNE 32302:1995 SOLID MINERAL FUELS. PETROGRAPHIC ANALYSIS METHODS. METHOD FOR DETERMINING MACERAL GROUP COMPOSITION.
- UNE 32301:1995 SOLID MINERAL FUELS. PETROGRAPHIC ANALYSIS METHODS. METHOD FOR DETERMINING MICROSCOPICALLY THE REFLECTANCE OF VITRINITE.
- UNE-EN 14397-1:2010 Fertilizers and liming materials - Determination of carbon dioxide - Part 1: Method for solid fertilizers
- UNE 21306:1976 METHODS OF TEST FOR THE DETERMINATION OF THE INSULATION RESISTANCE OF OLID INSULATING MATERIALS.
- UNE 32014:1962 SOLID FUELS ANALYSIS. PHOSPHORUS DETERMINATION IN ASHES OF COAL AND COKE BY GRAVIMETRIC METHOD.
- UNE 32009:1958 Solid fuels analysis. Determination of the forms of sulphur in coal.
- UNE 32002:1995 SOLID MINERAL FUELS. DETERMINATION OF MOISTURE IN THE ANALYSIS SAMPLE.
- UNE 21303:1983 METHODS OF TEST FOR VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS.
ES-AENOR, Methods for the Analysis of Solid Materials
German Institute for Standardization, Methods for the Analysis of Solid Materials
- DIN IEC 60167:1993 Methods of test for insulating materials for electrical purposes; insulation resistance of solid materials (IEC 60167:1964); German version HD 568 S1:1990
- DIN 51941-1:1994 Testing of carbon materials - Determination of chemical composition - Part 1: Sample preparation, solid materials, solid binders and impregnants
- DIN EN 14397-1:2010-07 Fertilizers and liming materials - Determination of carbon dioxide - Part 1: Method for solid fertilizers; German version EN 14397-1:2010
- DIN 51908:2022-10 Testing of carbonaceous materials - Determination of thermal conductivity at room temperature by means of a comparative method - Solid material
- DIN 51734:2008 Testing of solid mineral fuels - Proximate analysis and calculation of fixed carbon
- DIN EN 12048:1996-11 Solid fertilizers and liming material - Determination of moisture content - Gravimetric method by drying at (105 ± 2) °C (ISO 8190:1992, modified); German version EN 12048:1996
- DIN EN 15415-3:2012-06 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles; German version EN 15415-3:2012
- DIN 51724-3:2008 Solid mineral fuels - Determination of sulfur - Part 3: Instrumental methods
- DIN 51004:1994 Thermal analysis; determination of melting temperatures of crystalline materials by differential thermal analysis
- DIN 51901:2006-11 Testing of carbonaceous materials - Determination of density by the xylene method - Solid materials
- DIN EN 6041:2018-03 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC); German and English version EN 6041:2018
- DIN EN ISO 10564:1997 Soldering and brazing materials - Methods for the sampling of soft solders for analysis (ISO 10564:1993); German version EN ISO 10564:1997
- DIN 51734:2008-12 Testing of solid mineral fuels - Proximate analysis and calculation of fixed carbon
- DIN IEC 60093:1993 Methods of test for insulating materials for electrical purposes; volume resistivity and surface resistivity of solid electrical insulating materials (IEC 60093:1980); German version HD 429 S1:1983
- DIN 54385:2016 Solid recovered fuels - Collection of representative analytical samples from heterogeneous materials of low bulk density using the pressing-drill method
- DIN 54385:2016-08 Solid recovered fuels - Collection of representative analytical samples from heterogeneous materials of low bulk density using the pressing-drill method
- DIN 51944:2020-12 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
- DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
- DIN EN 6041:2018 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC); German and English version EN 6041:2018
- DIN 19698-5:2018-06 Characterization of solids - Sampling of solid and semi-solid materials - Part 5: Guidance for sampling hot-spots of populations
- DIN 51944:1999 Testing of carbonaceous materials - Determination of flexural strength by four point method - Solid materials
- DIN 50452-1:1995-11 Testing of materials for semiconductor technology - Test method for particle analysis in liquids - Part 1: Microscopic determination of particles
Professional Standard - Nuclear Industry, Methods for the Analysis of Solid Materials
- EJ/T 296.1-1987 Analytical method of trace uranium in urine solid fluorescence method
- EJ/T 20162-2018 Dissolution method of plutonium material analysis sample
- EJ/T 1110-2000 Standard guide for establishing calibration for a measurement method used to analyze nuclear fuel cycle materials
IT-UNI, Methods for the Analysis of Solid Materials
Association Francaise de Normalisation, Methods for the Analysis of Solid Materials
- NF EN ISO 105-X07:1997 Textiles - Essais de solidité des teintures - Partie X07 : solidité des teintures à la surteinture : laine.
- NF C26-215:1982 Method of testing insulating materials. Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials.
- NF EN ISO 105-X05:1997 Textiles - Essais de solidité des teintures - Partie X05 : solidité des teintures aux solvants organiques.
- NF EN ISO 105-G03:1997 Textiles - Essais de solidité des teintures - Partie G03 : solidité des teintures à l'ozone dans l'atmosphère.
- BP X10-040:2003 Caractérisation sensorielle des matériaux - Méthodologie générale - Recommandations méthodologiques pour l'analyse sensorielle de la matière première au produit fini
- NF M01-005:1967 Solid mineral fuels. Methods for evaluating random errors in the preparation and analysis of a sample.
- NF EN ISO 18134-3:2015 Biocombustibles solides - Méthodes de détermination de la teneur en humidité - Méthode de séchage à l'étuve - Partie 3 : humidité de l'échantillon pour analyse générale
- NF L17-041*NF EN 6041:2018 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
- NF X34-228:2011 Solid recovered fuels - Methods for sampling.
- NF ISO 20048-2:2023 Biocombustibles solides - Détermination des caractéristiques de dégagement gazeux et d'appauvrissement en oxygène - Partie 2 : méthode opérationnelle d'analyse d'un dégagement de monoxyde de carbone
- NF C26-220:1980 Method of testing insulating materials. Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions.
- NF X34-112:2011 Solid biofuels - Determination of particle density.
- NF C26-220/A1*NF EN 60112/A1:2010 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
- NF EN 60707:2000 Inflammabilité des matériaux solides non métalliques soumis à des sources d'allumage à flamme - Liste des méthodes d'essai
IN-BIS, Methods for the Analysis of Solid Materials
International Organization for Standardization (ISO), Methods for the Analysis of Solid Materials
- ISO 21687:2007 Carbonaceous materials used in the production of aluminium - Determination of density by gas pyknometry (volumetric) using helium as the analysis gas - Solid materials
- ISO 11726:2004 Solid mineral fuels - Guidelines for the validation of alternative methods of analysis
- ISO 11726:2017 Solid mineral fuels - Guidelines for the validation of alternative methods of analysis
- ISO 15901-2:2006 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 2: Analysis of mesopores and macropores by gas adsorption
- ISO 15901-3:2007 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Part 3: Analysis of micropores by gas adsorption
- ISO 8189:1992 Solid fertilizers — Determination of moisture content — Gravimetric method by drying under reduced pressure
- ISO 10564:1993 Soldering and brazing materials; methods for the sampling of soft solders for analysis
- ISO 925:1980 Solid mineral fuels; Determination of carbon dioxide content; Gravimetric method
- ISO 15901-2:2022 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption — Part 2: Analysis of nanopores by gas adsorption
PT-IPQ, Methods for the Analysis of Solid Materials
- NP 1011-1989 SOLID FUELS Coals Determination of moisture in the analysis sample Direct gravimetric method ISO method
- NP 4373-1999 Solid fuels.Coals.Determination of total moisture by the indirect gravimetric method(ASTM method)
- NP 4323-1999 Solid fuels.Coals.Determination of total moisture by the indirect gravimetric method(ISO method)
- NP 2874-1985
- NP 1014-1987
Professional Standard - Aerospace, Methods for the Analysis of Solid Materials
- QJ 968-1986 Test method for low temperature specific heat capacity of solid materials
- QJ 1521-1988 Test method for deep low temperature specific heat capacity of solid materials
- QJ 913A-1995 Analysis Method of Aluminum Powder Content in Composite Solid Propellant
- QJ 969-1986 Test method for average specific heat capacity of solid materials at high temperature up to 800°
Military Standard of the People's Republic of China-General Armament Department, Methods for the Analysis of Solid Materials
- GJB 332A-2004 Test method for linear expansion coefficient of solid materials
- GJB 331-1987 Test method for specific heat capacity of solid materials 60-370K
- GJB 1201.1A-2021 Test method for high temperature thermal diffusivity of solid materials Part 1: Laser pulse method
- GJB 330-1987 Test method for average specific heat capacity of solid materials from room temperature to 800°C
未注明发布机构, Methods for the Analysis of Solid Materials
- GJB 330A-2000 Test method for specific heat capacity of solid materials 60~2773K
- GJB 1201.1-1991 Test method for high temperature thermal diffusivity of solid materials Laser pulse method
Danish Standards Foundation, Methods for the Analysis of Solid Materials
- DS/EN 14397-1:2010 Fertilizers and liming materials - Determination of carbon dioxide - Part 1: Method for solid fertilizers
- DS/EN ISO 10564:1997 Soldering and brazing materials - Methods for the sampling of soft solders for analysis
- DS/ISO 21645:2021 Solid recovered fuels – Methods for sampling
Lithuanian Standards Office , Methods for the Analysis of Solid Materials
- LST EN 14397-1-2010 Fertilizers and liming materials - Determination of carbon dioxide - Part 1: Method for solid fertilizers
- LST HD 568 S1-2002 Methods of test for the determination of the insulation resistance of solid insulating materials (IEC 60167:1964)
AR-IRAM, Methods for the Analysis of Solid Materials
Standard Association of Australia （SAA）, Methods for the Analysis of Solid Materials
CEN - European Committee for Standardization, Methods for the Analysis of Solid Materials
- PD CEN/TS 15406:2006 Solid recovered fuels - Methods for the determination of bridging properties of bulk material
- PD CEN/TS 14778-2:2005 Solid biofuels - Sampling - Part 2: Methods for sampling particulate material transported in lorries
- PD CEN/TS 15296:2006 Solid Biofuels - Calculation of analyses to different bases
- PD CEN/TS 14775:2004 Solid biofuels - Method for the determination of ash content
- PD CEN/TS 14774-3:2004 Solid biofuels - Methods for the determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample
Professional Standard - Energy, Methods for the Analysis of Solid Materials
- NB/T 51019-2014 Method of compaction testing of solid backfilling materials
SG-SPRING SG, Methods for the Analysis of Solid Materials
- SS ISO 10564:1993 Soldering And Brazing Materials -Methods For The Sampling Of Soft Solders For Analysis
- SS 285 AMD 1-1984 Soldering And Brazing Materials -Methods For The Sampling Of Soft Solders For Analysis
US-FCR, Methods for the Analysis of Solid Materials
International Electrotechnical Commission (IEC), Methods for the Analysis of Solid Materials
- IEC 60167:1964 Methods of test for the determination of the insulation resistance of solid insulating materials
- IEC 62631-3-11:2018 Dielectric and resistive properties of solid insulating materials - Part 3-11: Determination of resistive properties (DC Methods) - Volume resistance and volume resistivity - Method for impregnation a
- IEC 60112:2020 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
Professional Standard - Agriculture, Methods for the Analysis of Solid Materials
- GB 1408-1989 Test method for power frequency electric strength of solid insulating materials
- NY/T 1881.3-2010 Densified biofuel-Test methods
Part 3:Moisture in general analysis sample
工业和信息化部/国家能源局, Methods for the Analysis of Solid Materials
- JB/T 12928-2016 Pressure wave test method for space charge distribution in solid insulating materials
- JB/T 12927-2016 Electroacoustic pulse test method for space charge distribution in solid insulating materials
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Methods for the Analysis of Solid Materials
- PREN 6040-1995 Aerospace Series Non-Metallic Materials Test Method Analysis of Thermoset Systems by High Performance Liquid Chromatography (HPLC) (Edition P1)
- PREN 6041-1995 Aerospace Series Non-Metallic Materials Test Method Analysis of Non-Metallic Materials (Uncured) by Differential Scanning Calorimetry (DSC) (Edition P1)
Professional Standard - Building Materials, Methods for the Analysis of Solid Materials
- JC/T 2342-2015 Method for the quantitative phase analysis of silicon nitride
机械工业部, Methods for the Analysis of Solid Materials
- JB/T 8443-1996 Chemical analysis method of copper-chromium contact materials
Professional Standard - Machinery, Methods for the Analysis of Solid Materials
- JB/T 8063.1-1996 Method for chemical analysis of powder metallurgy materials and products Determination of carbon in iron-based materials and products (gas volumetric method)
- JB/T 8063.1-2011 Methods for chemical analysis of powder metallurgy materials and products.Part 1:The gas volumetric method for the determination of carbon in iron-based materials and products
- JB/T 3064-1999 Methods for chemical analysis of friction materials of powder metallurgy
- JB/T 8505-1996 Chemical analysis method for copper-graphite electric contactor material
- JB/T 3064-2011 Methods for chemical analysis of friction materials of powder metallurgy
- JB/T 8505-2011 Test method for chemical analysis of copper-graphite electrical contact materials
European Committee for Electrotechnical Standardization（CENELEC）, Methods for the Analysis of Solid Materials
- HD 568 S1-1990 Methods of Test for the Determination of the Insulation Resistance of Solid Insulating Materials
UY-UNIT, Methods for the Analysis of Solid Materials
VN-TCVN, Methods for the Analysis of Solid Materials
- TCVN 6533-1999 Alumosilicate refractories.Methods of chemical analysis
European Committee for Standardization (CEN), Methods for the Analysis of Solid Materials
- EN 6041:2018 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
- PD CEN/TS 15403:2006 Solid recovered fuels - Methods for the determination of ash content
- EN 14397-1:2010 Fertilizers and liming materials - Determination of carbon dioxide - Part 1: Method for solid fertilizers
国家市场监督管理总局、中国国家标准化管理委员会, Methods for the Analysis of Solid Materials
- GB/T 36402-2018 Thermal analysis-mass spectrometry coupling method for ceramics materials
国家能源局, Methods for the Analysis of Solid Materials
- SY/T 7662-2022 Laser Raman spectroscopy analysis method of solid organic matter and inclusions
Group Standards of the People's Republic of China, Methods for the Analysis of Solid Materials
- T/CNTAC 4-2017 Testing method for coefficient of friction between yarn and solid material
PL-PKN, Methods for the Analysis of Solid Materials
- PN E04404-1986 Solid insulation materials Methods of test for electric strength at power frequencies
Liaoning Provincial Standard of the People's Republic of China, Methods for the Analysis of Solid Materials
The American Road & Transportation Builders Association, Methods for the Analysis of Solid Materials
JP-JWWA, Methods for the Analysis of Solid Materials
- JWWA Z110-2013 Materials and installations for water supply analysis methods for desoluted water