ZH
RU
ES

Wear Test Analysis

Wear Test Analysis, Total:500 items.

In the international standard classification, Wear Test Analysis involves: Testing of metals, Dentistry, Surface treatment and coating, Rubber and plastics products, Mechanical testing, Plastics, Iron and steel products, Construction materials, Equipment for petroleum and natural gas industries, Tyres, Products of the textile industry, Wood, sawlogs and sawn timber, Cutting tools, Graphic technology, Test conditions and procedures in general, Paints and varnishes, Road vehicles in general, Glass, Non-ferrous metals, Road engineering, Protection against fire, Environmental testing, Protection of and in buildings, Electrical wires and cables, Rubber, Analytical chemistry, Paper products, Wood-based panels, Ceramics, Linear and angular measurements, Clothes, Footwear, Fuels, Equipment for the chemical industry, Products of the chemical industry, Power transmission and distribution networks, Lubricants, industrial oils and related products, Seals, glands, Elements of buildings, Pipeline components and pipelines, Road vehicle systems, Powder metallurgy, Miscellaneous domestic and commercial equipment, Hydraulic energy engineering, Electrical accessories, Materials for aerospace construction, Medical equipment, Raw materials for rubber and plastics, Cellular materials, Conducting materials, Gears, Leather technology, Flexible drives and transmissions, Paint ingredients, Components and accessories for telecommunications equipment, Refractories, Agricultural machines, implements and equipment, Particle size analysis. Sieving, Coals, Nuclear energy engineering, Non-destructive testing, Fibre optic communications, Horology, Installations in buildings, Earth-moving machinery, Pesticides and other agrochemicals.

Professional Standard - Petrochemical Industry, Wear Test Analysis

SH/T 0573-1993 In-use Lubricating Oil Wear Particle Test (Analytical Ferrography)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Wear Test Analysis

GB/T 12444.1-1990 Metallic materials--Wear tests MM mode wear test
GB/T 12444.2-1990 Metallic materials--Wear tests Block-on-ring wear test
GB/T 12444-2006 Metallic materials Wear test method Block on ring sliding wear test
GB/T 5478-1985 Test method for wear of plastics by rolling
GB/T 5478-2008 Plastics-Test method for wear by rolling
GB/T 3960-1983 Test method for friction and wear of plastics by sliding
GB 3960-1983 Test method for friction and wear of plastics by sliding
GB/T 12812-1991 Test method for tumbling friability of rigid cellular plastics
GB/T 12967.2-1991 Anodizing of aluminium and aluminium alloys--Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus
GB/T 2423.53-2005 Environmental testing for electric and electronic products-Part 2:Test methods-Test Xb:Abrasion of markings and letterings caused by rubbing of fingers and hands

German Institute for Standardization, Wear Test Analysis

DIN 13973-1:2008 Dental materials - Guidance on testing of wear - Part 1: Wear by toothbrushing (ISO/TR 14569-1:2007)
DIN 50315:2010 Testing of metallic abrasives by centrifugal blasting - Wear testing, efficiency testing
DIN 13973-1:2001 Dental materials - Guidance on testing of wear resistance - Part 1: Wear by tooth brushing (ISO/TS 14569-1:1999)
DIN 52348:1985-02 Testing of glass and plastics; abraison test; sand trickling method
DIN EN 12274-7:2005-08 Slurry surfacing - Part 7: Shaking abrasion test; German version EN 12274-7:2005
DIN 14811-3:1977 Fire hoses; abrasion test
DIN 13973-1:2008-03 Dental materials - Guidance on testing of wear - Part 1: Wear by toothbrushing (ISO/TR 14569-1:2007)
DIN EN 60068-2-70:1996 Environmental testing - Part 2: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands (IEC 60068-2-70:1995); German version EN 60068-2-70:1996
DIN 8978:1973 Wear test for refrigerant compressors
DIN VDE 0472-605:1985 Testing of cables, insulated wires and flexible cords; abrasion
DIN 54607:2014 Tissue paper and tissue products - Determination of dry colour abrasion of table decoration products - Abrasion test
DIN 51165-1:2023-05 Vitreous and porcelain enamels - Determination of the resistance to hydroabrasion - Part 1: Hydroabrasion testing apparatus / Note: Date of issue 2023-04-21
DIN EN ISO 13427:2015-03 Geosynthetics - Abrasion damage simulation (sliding block test) (ISO 13427:2014); German version EN ISO 13427:2014
DIN EN 1071-6:2008 Advanced technical ceramics - Methods of test for ceramic coatings - Part 6: Determination of the abrasion resistance of coatings by a micro-abrasion wear test; German version EN 1071-6:2007
DIN EN 12373-9:1999 Aluminium and aluminium alloys - Anodizing - Part 9: Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus; German version EN 12373-9:1998
DIN 51396-2:1998 Testing of lubricants - Determination of wear elements - Part 2: Analysis by wavelength dispersive X-ray spectrometry (XRS)
DIN 51396-2:2008 Testing of lubricants - Determination of wear elements - Part 2: Wavelength dispersive X-ray fluorescence spectrometry (XRF)
DIN EN 4876:2021 Aerospace series - Environmental testing - Hand abrasion and fingerprint test on cabin touchscreen and pencil abrasion on signing touch pads; German and English version prEN 4876:2021
DIN EN 13892-4:2003 Methods of test for screed materials - Part 4: Determination of wear resistance BCA; German version EN 13892-4:2002
DIN CEN/TS 12697-50:2018-07*DIN SPEC 91537:2018-07 Bituminous mixtures - Test methods - Part 50: Resistance to scuffing; German version CEN/TS 12697-50:2018
DIN EN 12773:2000 Footwear - Test methods for outsoles - Needle tear strength; German version EN 12773:1999
DIN 53754:1977 Testing of plastics; determination of abrasion, abrasive disk method
DIN EN 13892-5:2003 Methods of test for screed materials - Part 5: Determination of wear resistance to rolling wheel of screed materials for wearing layer; German version EN 13892-5:2003
DIN 51191:2015-01 Vitreous and porcelain enamels - Sliding friction wear test using an abrasion wheel
DIN 53516:1987 Testing of rubber and elastomers; determination of abrasion resistance
DIN 50315:1988 Testing the wear and effectiveness of metallic abrasives by centrifugal blasting
DIN EN 1071-12:2010-07 Advanced technical ceramics - Methods of test for ceramic coatings - Part 12: Reciprocating wear test; German version EN 1071-12:2010
DIN 10800:2016-07 Analysis of tea - Determination of loss in mass of unground tea at 103 °C
DIN EN 12274-5:2003 Slurry surfacing - Test method - Part 5: Determination of wearing; German version EN 12274-5:2003
DIN EN 1097-9:2014 Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test; German version EN 1097-9:2014
DIN 52347:1987 Testing of glass and plastics; abrasion test; method using abrasion wheels and measurement of scattered light
DIN EN ISO 13427:1998 Geotextiles and geotextile-related products - Abrasion damage simulation (sliding block test) (ISO 13427:1998); German version EN ISO 13427:1998
DIN 53583:2007 Testing of pigments - Determination of fines content and of loss in mass by abrasion of pelletized carbon black pigments
DIN EN 12697-16:2016-10 Bituminous mixtures - Test methods - Part 16: Abrasion by studded tyres; German version EN 12697-16:2016
DIN EN 15305 Berichtigung 1:2009 Non-destructive testing - Test method for residual stress analysis by X-ray diffraction; German version EN 15305:2008, Corrigendum to DIN EN 15305:2009-01; German version EN 15305:2008/AC:2009
DIN 53863-1:1960 Testing of textiles; abrasion test methods for textile planar fabrics, principles

International Organization for Standardization (ISO), Wear Test Analysis

ISO/TR 14569-1:2007 Dental materials - Guidance on testing of wear - Part 1: Wear by toothbrushing
ISO 24469:2023 Road wear test of studded tyres
ISO 17693:2004 Footwear - Test methods for uppers - Resistance to damage on lasting
ISO 20871:2001 Footwear - Test methods for outsoles - Abrasion resistance
ISO 20868:2001 Footwear - Test methods for insoles - Abrasion resistance
ISO 13427:2014 Geosynthetics - Abrasion damage simulation (sliding block test)
ISO/TS 14569-2:2001 Dental materials - Guidance on testing of wear - Part 2: Wear by two- and/or three body contact
ISO 28080:2011 Hardmetals - Abrasion tests for hardmetals
ISO/TR 4918:1990 Textile floor coverings; determination of wear; castor chair test
ISO 28080:2021 Hardmetals - Abrasion tests for hardmetals
ISO 14635-3:2023 Gears — FZG test procedures — Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
ISO 19721:2022 Plastics — Abrasion test method for artificial turfs using combined UV exposure and mechanical wear
ISO 6601:2002 Plastics - Friction and wear by sliding - Identification of test parameters
ISO 14242-1:2012 Implants for surgery - Wear of total hip-joint prostheses - Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
ISO 14242-1:2014 Implants for surgery - Wear of total hip-joint prostheses - Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
ISO 14242-1:2002 Implants for surgery - Wear of total hip-joint prostheses - Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for tests
ISO 14242-1:2014/Amd 1:2018 Implants for surgery — Wear of total hip-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test — Amendment 1
ISO 18192-1:2011/Amd 1:2018 Implants for surgery — Wear of total intervertebral spinal disc prostheses — Part 1: Loading and displacement parameters for wear testing and corresponding environmental conditions for test — Amendmen
ISO 23794:2010 Rubber, vulcanized or thermoplastic - Abrasion testing - Guidance
ISO 23794:2003 Rubber, vulcanized or thermoplastic - Abrasion testing - Guidance
ISO 22731:2020 Carbonaceous materials used in the production of aluminium — Cathode — Cathode abrasion testing
ISO 23794:2023 Rubber, vulcanized or thermoplastic — Abrasion testing — Guidance
ISO 23794:2015 "Rubber, vulcanized or thermoplastic - Abrasion testing - Guidance"
ISO 18192-1:2008 Implants for surgery - Wear of total intervertebral spinal disc prostheses - Part 1: Loading and displacement parameters for wear testing and corresponding environmental conditions for test
ISO 18192-1:2011 Implants for surgery - Wear of total intervertebral spinal disc prostheses - Part 1: Loading and displacement parameters for wear testing and corresponding environmental conditions for test
ISO 14243-3:2004/cor 1:2006 Implants for surgery - Wear of total knee-joint prostheses - Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test
ISO 14242-3:2009 Implants for surgery - Wear of total hip-joint prostheses - Part 3: Loading and displacement parameters for orbital bearing type wear testing machines and corresponding environmental conditions for test
ISO 14243-1:2009 Implants for surgery - Wear of total knee-joint prostheses - Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test
ISO 14243-1:2002 Implants for surgery - Wear of total knee-joint prostheses - Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmetal conditions for test
ISO 14243-3:2004 Implants for surgery - Wear of total knee-joint prostheses - Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test
ISO 14243-3:2014 Implants for surgery - Wear of total knee-joint prostheses - Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test
ISO 13427:1998 Geotextiles and geotextile-related products - Abrasion damage simulation (sliding block test)

Korean Agency for Technology and Standards (KATS), Wear Test Analysis

KS P ISO TR 14569-1:2013 Dental materials－Guidance on testing of wear－Part 1：Wear by toothbrushing
KS K 0607-2011 Test method for abrasion resistance of textile fabrics：Flexing and abrasion method
KS F 2215-2020 Method of abrasion test for wood
KS K 0525-2010 Test method for abrasion resistance of textile fabrics-Uniform abrasion method
KS K 0525-2015 Test method for abrasion resistance of textile fabrics－Uniform abrasion method
KS K 0525-2021 Test method for abrasion resistance of textile fabrics — Uniform abrasion method
KS D 0284-2005 Standard test method for abrasion resistance of pipeline coatings
KS D 8335-2001 Methods of wear resistance test for metallic coatings
KS D 8335-1986 Methods of wear resistance test for metallic coatings
KS P ISO TR 14569-1:2019 Dental materials — Guidance on testing of wear — Part 1: Wear by toothbrushing
KS K 0607-2006 Test method for abrasion resistance of textile fabrics：Flexing and abrasion method
KS K 0607-2017 Test method for abrasion resistance of textile fabrics：Flexing and abrasion method
KS K ISO 12947-1:2008 Textiles-Determination of abrasion resistance of fabrics by the Martindale method-Part 1:Martindale abrasion testing apparatus
KS K ISO 12947-1:2014 Textiles — Determination of abrasion resistance of fabrics by the Martindale method — Part 1: Martindale abrasion testing apparatus
KS M 6689-2008 Testing methods for abrasion resistance of rubber vulcanized(Pico abrader)
KS M 6689-1986 Testing methods for abrasion resistance of rubber vulcanized(Pico abrader)
KS D 8314-1-2011(2021) Test methods for abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys－Part 1：Wheel wear test
KS D 8314-1-2011(2016) Test methods for abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys－Part 1：Wheel wear test
KS K 0607-2022 Test method for abrasion resistance of textile fabrics: Flexing and abrasion method
KS M ISO 17693:2005 Footwear－Test methods for uppers－Resistance to damage on lasting
KS P ISO TS 14569-2:2010 Dental materials-Guidance on testing of wear-Part 2:Wear by two- and/or three body contact
KS P ISO TS 14569-2:2014 Dental materials — Guidance on testing of wear — Part 2: Wear by two- and/or three body contact
KS F 2508-2007 Method of test for resistance to abrasion of coarse aggregate by use of the Los Angeles machine
KS F 2508-2002 Method of test for resistance to abrasion of coarse aggregate by use of the Los Angeles machine
KS F 2508-1982 Method of test for resistance to abrasion of coarse aggregate by use of the Los Angeles machine
KS F 2811-2016(2021) Method of abrasion test for building materials and part of building construction (Method of abrasion test for flooring materials method with rotating disk fitted friction and impact)
KS D 8314-1-2011 Test methods for abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys-Part 1:Wheel wear test
KS F 2811-2016 Method of abrasion test for building materials and part of building construction (Method of abrasion test for flooring materials method with rotating disk fitted friction and impact)
KS F 2811-1978 Method of abrasion test for building materials and part of building construction (Method of abrasion test for flooring materials method with rotating disk fitted friction and impact)
KS K ISO TR 4918:2008 Textile floor coverings－Determination of wear－Castor chair test
KS D 8314-3-2001 Test methods for abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys －Part 3：Sand-falling abrasion resistance test
KS L ISO 6344-1-2005(2010) Coated abrasives－Grain size analysis－Part 1：Grain size distribution test
KS M ISO 6601:2003 Plastics－Friction and wear by sliding－Identification of test parameters
KS R 0079-2013(2018) Wear test procedure on inertia dynamometer-brake lining and pad
KS K 0609-2021 Test method for pile abrasive retention of corduroy fabrics
KS M ISO 6601-2003(2018) Plastics－Friction and wear by sliding－Identification of test parameters
KS R 0079-1987 Wear test procedure on inertia dynamometer-brake lining and pad
KS P ISO 14242-1:2009 Implants for surgery-Wear of total hip-joint prostheses- Part 1:Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
KS C IEC 60068-2-70:2020 Environmental Testing — Part 2-70: Tests Xb: abrasion of markings and letterings caused by rubbing of fingers and hands
KS F 2813-2016 Method of abrasion test for building materials and part of building construction(abrasive paper method)
KS K ISO 12947-1:2019 Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 1: Martindale abrasion testing apparatus
KS M ISO 23794:2012 Rubber, vulcanized or thermoplastic-Abrasion testing-Guidance
KS M ISO 23794-2017(2022) Rubber, vulcanized or thermoplastic－Abrasion testing－Guidance
KS M ISO 23794:2017 Rubber, vulcanized or thermoplastic－Abrasion testing－Guidance
KS P ISO 18192-1:2009 Implants for surgery－Wear of total intervertebral spinal disc prostheses－Part 1：Loading and displacement parameters for wear testing and corresponding environmental conditions for test
KS F 2813-2016(2021) Method of abrasion test for building materials and part of building construction(abrasive paper method)
KS F 2812-2006(2021) Method of abrasion test for building materials and part of building construction(Falling sand method)
KS F 2812-2006(2016) Method of abrasion test for building materials and part of building construction(Falling sand method)
KS K ISO 13427-2016(2021) Geotextiles and geotextile-related products－Abrasion damage simulation(sliding block test)
KS P ISO 18192-1:2020 Implants for surgery — Wear of total intervertebral spinal disc prostheses — Part 1: Loading and displacement parameters for wear testing and corresponding environmental conditions for test
KS P ISO 14243-1:2009 Implants for surgery－Wear of total knee-joint prostheses－ Part 1：Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test
KS R 0079-2013 Wear test procedure on inertia dynamometer-brake lining and pad
KS R 0079-2002 Wear test procedure on inertia dynamometer-Brake friction materials

GM North America, Wear Test Analysis

GM GMN10030-2002 Belt Abrasion Wear Test
GM GM9516P-1988 Wear Resistance - Canvas Belt Wear Tester
GM GM9337P-1998 Test Method to Determine Fiber Weight Loss and Wear on Carpet

GM Europe, Wear Test Analysis

GME 6755-2008 Tire Wear Test

GB-REG, Wear Test Analysis

REG NASA-LLIS-0846-2000 Lessons Learned ?Wear Particle Analysis Using Ferrography

Professional Standard - Machinery, Wear Test Analysis

JB/T 7506-1994 Solid abrasive grain abrasion test. Pin-sand paper disc sliding abrasion method
JB/T 7705-1995 Abrasion test method for loose abrasive grains Rubber wheel method
JB/T 9396-1999 The compensating exfension wires for tungsten - rhenium thermocouples
JB/T 9396-2013 Ring-block wear testing machines.Technical specification
JB/T 8820-1998 Motorcycle transmission chains.Testing rules of wear performance
JB/T 8820-2013 Motorcycle transmission chains.Testing rules of wear performance
JB/T 9758-2004 Fast simulation test procedure for cylinder liners and rings

American Society for Testing and Materials (ASTM), Wear Test Analysis

ASTM G137-97(2009) Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration
ASTM G77-05 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
ASTM G77-05e1 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
ASTM G77-98 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
ASTM G77-05(2010) Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
ASTM G176-03 Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test8212;Cumulative Wear Method
ASTM G176-03(2009) Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test8212;Cumulative Wear Method
ASTM F1016-93(1997) Standard Practice for Linear Tire Treadwear Data Analysis
ASTM F1016-93(2001) Standard Practice for Linear Tire Treadwear Data Analysis
ASTM G176-03(2017) Standard Test Method for Ranking Resistance of Plastics to Sliding Wear Using Block-on-Ring Wear Test—Cumulative Wear Method
ASTM G132-96 Standard Test Method for Pin Abrasion Testing
ASTM G132-96(2001) Standard Test Method for Pin Abrasion Testing
ASTM G132-96(2007) Standard Test Method for Pin Abrasion Testing
ASTM G132-96(2018) Standard Test Method for Pin Abrasion Testing
ASTM D5181-91(1997)e1 Standard Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester
ASTM D5181-04 Standard Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester
ASTM D5181-09 Standard Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester
ASTM D5181-09(2017) Standard Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester
ASTM G77-17(2022) Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
ASTM D4966-12 Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
ASTM D4158-92 Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)
ASTM D4158-01 Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)
ASTM D4158-08(2016) Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)
ASTM D4058-96(2020) Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
ASTM C285-88(2005) Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel
ASTM C285-88(1999) Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel
ASTM D3885-99 Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM G99-05(2016) Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM D3181-95(2002) Standard Guide for Conducting Wear Tests on Textiles
ASTM D3181-95(2008) Standard Guide for Conducting Wear Tests on Textiles
ASTM G98-02(2009) Standard Test Method for Galling Resistance of Materials
ASTM D4685/D4685M-15(2020) Standard Test Method for Pile Fabric Abrasion
ASTM D3181-15e1 Standard Guide for Conducting Wear Tests on Textiles
ASTM G77-17 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
ASTM D4213-96e1 Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss
ASTM D4213-96(2003) Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss
ASTM D4213-08 Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss
ASTM G206-17(2021)e1 Standard Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating Wear Tests
ASTM D2228-02 Standard Test Method for Rubber Property-Relative Abrasion Resistance by the Pico Abrader Method
ASTM D3885-04 Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM C285-10(2015)e1 Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel
ASTM E405-89(1996)e1 Standard Test Methods for Wear Testing Rotary Operators for Windows
ASTM E405-04 Standard Test Methods for Wear Testing Rotary Operators for Windows
ASTM G99-95a(2000)e1 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM G9-87(1998) Standard Test Method for Water Penetration into Pipeline Coatings
ASTM G99-05(2010) Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM E405-04(2012) Standard Test Methods for Wear Testing Rotary Operators for Windows
ASTM G99-17 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM G83-96 Standard Test Method for Wear Testing with a Crossed-Cylinder Apparatus
ASTM D4966-22 Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
ASTM D4966-12e1 Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
ASTM G98-91(1996)e1 Standard Test Method for Galling Resistance of Materials
ASTM D4685-07 Standard Test Method for Pile Fabric Abrasion
ASTM G98-02 Standard Test Method for Galling Resistance of Materials
ASTM G98-17(2022) Standard Test Method for Galling Resistance of Materials
ASTM G206-11 Standard Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating Wear Tests
ASTM G195-18 Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser
ASTM D3885-07a Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D3885-07a(2011) Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D3885-07a(2019) Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM G195-13a Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser
ASTM D3885-07A(2019)e1 Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D3885-07a(2015) Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM C285-10 Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel
ASTM G81-97a Standard Test Method for Jaw Crusher Gouging Abrasion Test
ASTM G81-97a(2007) Standard Test Method for Jaw Crusher Gouging Abrasion Test
ASTM G81-97a(2002)e1 Standard Test Method for Jaw Crusher Gouging Abrasion Test
ASTM G105-89(1997)e1 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
ASTM D2-33(1968) Method of Test for Abrasion of Rock by Use of the Deval Machine
ASTM G81-97a(2013) Standard Test Method for Jaw Crusher Gouging Abrasion Test
ASTM G105-20 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
ASTM G81-97a(2018) Standard Test Method for Jaw Crusher Gouging Abrasion Test
ASTM G105-16 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
ASTM D2714-94(2003) Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine
ASTM D2714-94(2009) Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine
ASTM F2497-05 Standard Practice for Abrasion and Scuff Resistance of Inkjet Media by the Sutherland Rub Tester
ASTM D1508-99 Standard Test Method for Carbon Black, Pelleted-Fines and Attrition
ASTM G190-06 Standard Guide for Developing and Selecting Wear Tests
ASTM G196-08 Standard Test Method for Galling Resistance of Material Couples
ASTM G190-15 Standard Guide for Developing and Selecting Wear Tests
ASTM D1508-12(2017) Standard Test Method for Carbon Black, Pelleted Fines and Attrition
ASTM D3181-15(2019) Standard Guide for Conducting Wear Tests on Textiles
ASTM C1353-07 Standard Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic
ASTM C1353-98(2006) Standard Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic
ASTM G195-21 Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser
ASTM G195-13 Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser
ASTM G195-22 Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser
ASTM G206-17 Standard Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating Wear Tests
ASTM F1016-07 Standard Practice for Linear Tire Treadwear Data Analysis
ASTM F1016-07(2013)e1 Standard Practice for Linear Tire Treadwear Data Analysis
ASTM D1508-02e2 Standard Test Method for Carbon Black, Pelleted Fines and Attrition
ASTM D1508-02e1 Standard Test Method for Carbon Black, Pelleted Fines and Attrition
ASTM C1137-97 Standard Test Method for Degradation of Fine Aggregate Due to Attrition
ASTM D813-07 Standard Test Method for Rubber Deterioration-Crack Growth
ASTM D1508-02(2007) Standard Test Method for Carbon Black, Pelleted Fines and Attrition
ASTM D1508-02(2007)e1 Standard Test Method for Carbon Black, Pelleted Fines and Attrition
ASTM D3181-10 Standard Guide for Conducting Wear Tests on Textiles
ASTM D1508-12 Standard Test Method for Carbon Black, Pelleted Fines and Attrition
ASTM D813-07(2014) Standard Test Method for Rubber Deteriorationmdash;Crack Growth
ASTM D3885-02 Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM G195-08 Standard Guide for Conducting Wear Tests Using a Rotary Platform, Double-Head Abraser
ASTM D2228-04 Standard Test Method for Rubber Property-Relative Abrasion Resistance by the Pico Abrader Method
ASTM D2228-04e1 Standard Test Method for Rubber Property-Relative Abrasion Resistance by the Pico Abrader Method
ASTM D2228-04(2009) Standard Test Method for Rubber Property-Relative Abrasion Resistance by the Pico Abrader Method
ASTM D2228-04(2015) Standard Test Method for Rubber Property&x2014;Relative Abrasion Resistance by Pico Abrader Method
ASTM D4058-96(2015) Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
ASTM D4058-96 Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
ASTM D4058-96(2001) Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
ASTM C1137-05 Standard Test Method for Degradation of Fine Aggregate Due to Attrition
ASTM D4058-96(2006) Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
ASTM D3181-95 Standard Guide for Conducting Wear Tests on Textiles
ASTM D5182-97e1 Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
ASTM D5182-97(2002)e1 Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
ASTM D4170-97 Standard Test Method for Fretting Wear Protection by Lubricating Greases
ASTM C1027-09 Standard Test Method for Determining Visible Abrasion Resistance of Glazed Ceramic Tile
ASTM D5159-91(1997) Standard Test Method for Dusting Attrition of Granular Activated Carbon
ASTM D5182-19 Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
ASTM D3181-15 Standard Guide for Conducting Wear Tests on Textiles
ASTM D515-88 Standard test method for dust abrasion of granular activated carbon
ASTM F1978-99 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber^TM Abraser
ASTM F1978-00e1 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber^TM Abraser
ASTM F1978-00(2007)e2 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
ASTM F1978-22 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
ASTM C1458-00 Standard Test Method for Nondestructive Assay of Plutonium, Tritium and ²⁴¹Am by Calorimetric Assay
ASTM C1458-09e1 Standard Test Method for Nondestructive Assay of Plutonium, Tritium and ²⁴¹Am by Calorimetric Assay
ASTM D2714-94(2014) Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine
ASTM G99-04a Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM G99-04 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM G99-05 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM C704-07 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
ASTM E2316-03(2009) Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides
ASTM D573-04(2010) Standard Test Method for Rubber&8212;Deterioration in an Air Oven
ASTM D4213-08(2016) Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss

BE-NBN, Wear Test Analysis

IN-BIS, Wear Test Analysis

Group Standards of the People's Republic of China, Wear Test Analysis

T/CSTM 00646.1-2021 Ｍetal materials－Friction and wear testing with a pin-on-disk apparatus － Part 1: Friction and wear testing at ambient temperature
T/CSTM 00646.2-2021 Metal materials_—Friction and wear testing with a pin-on-disk apparatus — Part 2: Friction and wear testing at high-temperature
T/CFA 010604.6-2018 Test method on three body abrasion of metallic materials
T/CFA 010604-3-2016 Test method on impact abrasion of steel and iron materials
T/CFA 010604.05-2017 Test method on impact corrosion-abrasion of steel and iron materials
T/CSTM 00648-2021 Test method for synergistic effect of electrochemical corrosion-abrasive wear of metallic materials
T/QGCML 1894-2023

RU-GOST R, Wear Test Analysis

GOST R 55545-2013 Dental materials. Testing methods of wear. Part 1. Wear by toothbrushing
GOST 17367-1971 Metalls. Method of abrasion test by friction against embedded abragant grain
GOST 23.207-1979 Ensuring of wear resistance of products. Testing of engineering materials for impact abrasive wear
GOST R ISO 14242-1-2012 Implants for surgery.Wear of total hip-joint prostheses. Part 1. Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
GOST R ISO 18192-1-2014 Implants for surgery. Wear of total intervertebral spinal disc prostheses. Part 1. Loading and displacement parameters for wear testing and corresponding environmental conditions for test
GOST R ISO 14242-3-2013 Implants for surgery. Wear of total hip-joint prostheses. Part 3. Loading and displacement parameters for orbital bearing type wear testing machines and corresponding environmental conditions for test
GOST R ISO 14243-1-2012 Implants for surgery. Wear of total knee-joint prostheses. Part 1. Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test
GOST R ISO 14243-3-2012 Implants for surgery.Wear of total knee-joint prostheses. Part 3. Loading and displacement parameters for wear-testing machines with displasement control and corresponding environmental conditions for test

SE-SIS, Wear Test Analysis

SIS SS 22 72 10-1983 Paving products — Abrasion test

IT-UNI, Wear Test Analysis

UNI 7858-1978
UNI EN ISO 28080:2021 Hardmetals - Abrasion tests for hardmetals

Taiwan Provincial Standard of the People's Republic of China, Wear Test Analysis

CNS 14791-2003 Method of test for degradation of fine aggregate due to attrition
CNS 490-1993 Method of Test for Resistance to Abrasion of Small Size Coarse Aggregates by Use of the Los Angeles Machine
CNS 11320-2000 Method of Test for Abrasion Resistance of Stone Subjected to Foot Traffic
CNS 14278-1998 Method of test for abrasion resistance of geotextiles (Sand paper/sliding block method)
CNS 6851-1980 Method of Test for Sieve Analysis of Wet Milled and Dry Milled Porcenlain Enamel
CNS 3408-1985 Method of Test for Resistance to Abrasion of Large Size Coarse Aggregate by Use of the Los Angeles machine

(U.S.) Ford Automotive Standards, Wear Test Analysis

FORD FLTM BN 158-01-2009 MARTINDALE ABRASION TESTING OF TEXTILE FABRICS
FORD FLTM BN 161-01-2011 STEERING WHEEL WEAR RUB TEST
FORD FLTM BN 160-01-2011 LINEAR ABRASION TEST FOR SHIFT KNOBS
FORD FLTM BJ 016-1-2000 FOUR-BALL WEAR TEST FOR LUBRICATING FLUIDS
FORD FLTM AY 103-1-2000 ATTRITION TEST FOR MOLECULAR SIEVE BEADS
FORD FLTM AY 103-01-2000 ATTRITION TEST FOR MOLECULAR SIEVE BEADS [Replaced: FORD FLTM AY 003-01]

国家能源局, Wear Test Analysis

SY/T 7496-2020 Casing wear test method
SH/T 0944.1-2017 Determination of anti-wear properties of lubricants FE8 rolling bearing wear tester method Part 1: Lubricating oils

Standard Association of Australia （SAA）, Wear Test Analysis

AS 1038.19:2000(R2013)
AS/NZS 4266.20:2004 Reconstituted wood-based panels - Methods of test - Resistance to surface abrasion (Taber abrasion test)
AS 2001.2.25.1:2006 Methods of test for textiles - Physical tests - Determination of the abrasion resistance of fabrics by the Martindale method - Martindale abrasion testing apparatus
AS 2001.2.26:1990 Methods of test for textiles - Physical tests - Determination of abrasion resistance of textile fabrics (flexing and abrasion method)
AS 1038.19:2000 Coal and coke - Analysis and testing - Higher rank coal - Abrasion Index

International Federation of Trucks and Engines, Wear Test Analysis

NAVISTAR CEMS DT-10-2001 Rubbing Wear Test for Interior Components

API - American Petroleum Institute, Wear Test Analysis

API STD 7CW-2015 Casing Wear Tests (First Edition)

Canadian General Standards Board （CGSB), Wear Test Analysis

CGSB 1-GP-71 METH 101.1-1982 Methodes D'Essai Des Peintures Et Pigments Preparation Des Plaques En Fer-Blanc Methode Par Abrasion Ou Sans Abrasion
CGSB 1-GP-71 METH 104.1-1974 Methods of Testing Paints and Pigments Abrasion Resistance

Indonesia Standards, Wear Test Analysis

SNI ISO 12947-1:2010 Textile - Determination of the abrasion resistance of fabrics by the Martindale method Part 1 : Martindale abrasion testing apparatus
SNI ISO 14242-1:2009 Implants for surgery - Wear of total hip-joint prostheses - Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test

European Committee for Standardization (CEN), Wear Test Analysis

EN 1097-9:2014 Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test
EN 1071-6:2007 Advanced technical ceramics - Methods of test for ceramic coatings - Part 6: Determination of the abrasion resistance of coatings by a micro-abrasion wear test
EN 13892-5:2003 Methods of test for screed materials - Part 5: Determination of wear resistance to rolling wheel of screed material for wearing layer
EN ISO 28080:2021 Hardmetals - Abrasion tests for hardmetals (ISO 28080:2021)
DD ENV 1071-6-2002 Advanced technical ceramics Methods of test for ceramic coatings Part 6: Determination of the abrasion resistance of coatings by a micro-abrasion wear test
EN 1071-12:2010 Advanced technical ceramics - Methods of test for ceramic coatings - Part 12: Reciprocating wear test
EN 1071-13:2010 Advanced technical ceramics - Methods of test for ceramic coatings - Part 13: Determination of wear rate by the pin-on-disk method

ES-AENOR, Wear Test Analysis

UNE 7 069

Association Francaise de Normalisation, Wear Test Analysis

NF T30-015:1991 Paints and varnishes. Abrasion resistance test.
XP S91-252-1*XP ISO/TS 14569-1:2002 Dental materials - Guidance on testing of wear resistance - Part 1 : wear by tooth brushing
NF P98-857-7*NF EN 12274-7:2005 Slurry surfacing - Test methods - Part 7 : shaking abrasion test
NF P18-650-9*NF EN 1097-9:2014 Tests for mechanical and physical properties of aggregates - Part 9 : determination of the resistance to wear by abrasion from studded tyres - Nordic test
NF EN ISO 13427:2015 Géosynthétiques - Simulation de l'endommagement par abrasion (essai du bloc glissant)
NF A05-002-1*NF EN ISO 6370-1:2021 Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 1 : abrasion testing apparatus
NF EN 12274-7:2005 Matériaux bitumineux coulés à froid - Méthodes d'essai - Partie 7 : essai d'abrasion par agitation
NF G62-115*NF EN ISO 17693:2005 Footwear - Test methods for uppers - Resistance to damage on lasting
NF G07-178-1*NF EN ISO 12947-1:1999 Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 1 : Martindale abrasion testing apparatus
NF E75-100*NF ISO 6344-1:2001 Coated abrasives - Grain size analysis - Part1 : grain size distribution test.
NF A95-189:2021 Hardmetals - Abrasion tests for hardmetals
XP S91-252-2*XP ISO/TS 14569-2:2002 Dental materials - Guidance on testing of wear - Part 2 : wear by two- and/or three body contact
NF A92-801-12*NF EN 1071-12:2010 Advanced technical ceramics - Methods of test for ceramic coatings - Part 12 : reciprocating wear test.
NF P14-204-5*NF EN 13892-5:2004 Methods of test for screed materials - Part 5 : determination of wear resistance to rolling wheel of screed material for wearing layer
NF G38-122*NF EN ISO 13427:2015 Geosynthetics - Abrasion damage simulation (sliding block test)
NF S94-173-1*NF ISO 14242-1:2014 Implants for surgery - Wear of total hip-joint prostheses - Part 1 : loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
NF ISO 14242-1:2014 Implants chirurgicaux - Usure des prothèses totales de l'articulation de la hanche - Partie 1 : paramètres de charge et de déplacement pour machines d'essai d'usure et conditions environnementales correspondantes d'essai
NF EN 1071-12:2010 Céramiques techniques avancées - Méthodes d'essai pour revêtements céramiques - Partie 12 : essai d'usure en va-et-vient
NF P98-857-5:2003 Slurry surfacing - Test methods - Part 5 : determination of wearing.
NF B10-508:1973 Quarry products. Limestones. Abrasion test using a metal disc.
NF EN ISO 26424:2016 Céramiques techniques - Détermination de la résistance à l'abrasion des revêtements par essai d'abrasion à micro-échelle
NF L17-043*NF EN 4864:2020 Aerospace series - Environmental testing - High dynamic abrasion, mar, scratch and punch test in cabin interior
XP ISO/TS 14569-1:2002 Produits dentaires - Lignes directrices sur les essais de résistance à l'usure - Partie 1 : usure par brossage des dents
NF P14-204-4*NF EN 13892-4:2003 Methods of test for screed materials - Part 4 : determination of wear resistance-BCA
NF P98-818-16*NF EN 12697-16:2017 Bituminous mixtures - Test methods - Part 16 : abrasion by studded tyres
NF T43-020:2010 Rubber, vulcanized or thermoplastic - Abrasion testing - Guidance.
NF T43-020*NF ISO 23794:2015 Rubber, vulcanized or thermoplastic - Abrasion testing - Guidance
NF S94-176-1*NF ISO 14243-1:2010 Implants for surgery - Wear of total knee-joint prostheses - Part 1 : loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test
NF S94-173-3*NF ISO 14242-3:2009 Implants for surgery - Wear of total hip-joint prostheses - Part 3 : loading and displacement parameters for orbital bearing type wear testing machines and corresponding environmental conditions for test
NF S94-173-1/A1*NF ISO 14242-1/A1:2018 Implants for surgery - Wear of total hip-joint prostheses - Part 1 : loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test - AMENDMENT 1
NF ISO 14242-1/A1:2018 Implants chirurgicaux - Usure des prothèses totales de l'articulation de la hanche - Partie 1 : paramètres de charge et de déplacement pour machines d'essai d'usure et conditions environnementales correspondantes d'essai - AMENDEMENT 1
NF ISO 14242-3:2009 Implants chirurgicaux - Usure des prothèses totales de l'articulation de la hanche - Partie 3 : paramètres de charge et de déplacement pour machines d'essai d'usure du type orbital de maintien et conditions environnementales correspondantes d'essai
NF D14-501:2012 Sanitary appliances - Resistance to abrasion of enamelled surfaces - Test method.
NF D14-501:1985 Sanitary appliances. Resistance to abrasion of enamelled surfaces. Test method.

BR-ABNT, Wear Test Analysis

ABNT NBR 9498-2011 Safety glass - Test method for abrasion

British Standards Institution (BSI), Wear Test Analysis

BS ISO 24469:2023 Road wear test of studded tyres
BS ISO 6370-1:2011 Vitreous and porcelain enamels. Determination of the resistance to abrasion. Abrasion testing apparatus
BS EN 12747:1999 Footwear - Test methods for insoles - Abrasion resistance
BS EN 12770:2000 Footwear - Test methods for outsoles - Abrasion resistance
BS EN 1071-6:2007 Advanced technical ceramics - Methods of test for ceramic coatings - Determination of the abrasion resistance of coatings by a micro-abrasion wear test
BS EN ISO 105-X12:2002 Textiles - Tests for colour fastness - Colour fastness to rubbing
BS ISO 28080:2011 Hardmetals. Abrasion tests for hardmetals
BS EN ISO 105-X12:2016 Textiles. Tests for colour fastness. Colour fastness to rubbing
BS ISO 14242-1:2014 Implants for surgery. Wear of total hip-joint prostheses. Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
BS ISO 14242-1:2002 Implants for surgery - Wear of total hip joint prostheses - Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
12/30258913 DC BS ISO 14243-4. Implants for surgery. Wear of total knee prostheses. Part 4. Wear of the patella-femoral joint. Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
BS EN 12274-5:2003 Slurry surfacing. Test methods. Determination of wearing
BS ISO 18192-1:2011+A1:2018 Implants for surgery — Wear of total intervertebral spinal disc prostheses Part 1 : Loading and displacement parameters for wear testing and corresponding environmental conditions for test
BS EN ISO 13427:2014 Tracked Changes. Geosynthetics. Abrasion damage simulation (sliding block test)
BS EN 13892-5:2003 Methods of test for screed materials - Determination of wear resistance to rolling wheel of screed material for wearing layer
BS ISO 19721:2022 Plastics. Abrasion test method for artificial turfs using combined UV exposure and mechanical wear
BS ISO 18192-1:2009 Implants for surgery. Wear of total intervertebral spinal disc prostheses. Loading and displacement parameters for wear testing and corresponding environmental conditions for test
BS ISO 18192-1:2011 Implants for surgery. Wear of total intervertebral spinal disc prostheses. Loading and displacement parameters for wear testing and corresponding environmental conditions for test
BS 3900-E16:2000 Methods of test for paints - Determination of resistance to abrasion (reciprocating test panel method)
BS ISO 23794:2002 Rubber, vulcanized or thermoplastic - Abrasion testing - Guidance
BS ISO 14242-1:2014+A1:2018 Implants for surgery. Wear of total hip-joint prostheses. Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
20/30383522 DC BS ISO 19721. Plastics. Abrasion test method for artificial turfs using combined UV exposure and mechanical wear
BS EN 1071-12:2010 Advanced technical ceramics - Methods of test for ceramic coatings - Reciprocating wear test
BS EN ISO 13427:1998 Geotextiles and geotextile-related products. Abrasion damage simulation (sliding block test)

Danish Standards Foundation, Wear Test Analysis

DS/EN 12274-7:2006 Slurry surfacing - Test methods - Part 7: Shaking abrasion test
DS/EN 12274-5:2003 Slurry surfacing - Test method - Part 5: Determination of wearing
DS/ISO 28080:2021 Hardmetals – Abrasion tests for hardmetals
DS/EN ISO 28080:2021 Hardmetals – Abrasion tests for hardmetals (ISO 28080:2021)
DS/EN ISO 13427:1999 Geotextiles and geotextile-related products - Abrasion damage simulation (sliding block test)
DS/EN 1071-12:2010 Advanced technical ceramics - Methods of test for ceramic coatings - Part 12: Reciprocating wear test
DS/EN 1071-6:2008 Advanced technical ceramics - Methods of test for ceramic coatings - Part 6: Determination of the abrasion resistance of coatings by a micro-abrasion wear test
DS/ISO 5470-2:2021 Rubber- or plastics-coated fabrics – Determination of abrasion resistance – Part 2: Martindale abrader

Lithuanian Standards Office , Wear Test Analysis

LST EN 12274-7-2005 Slurry surfacing - Test methods - Part 7: Shaking abrasion test
LST EN 12274-5-2003 Slurry surfacing - Test method - Part 5: Determination of wearing
LST EN 1071-12-2010 Advanced technical ceramics - Methods of test for ceramic coatings - Part 12: Reciprocating wear test
LST EN 1071-6-2008 Advanced technical ceramics - Methods of test for ceramic coatings - Part 6: Determination of the abrasion resistance of coatings by a micro-abrasion wear test

AENOR, Wear Test Analysis

UNE-EN 12274-7:2007 Slurry surfacing - Part 7: Shaking abrasion test
UNE-EN 12274-5:2003 Slurry surfacing - Test method - Part 5: Determination of wearing.
UNE-EN ISO 13427:2015 Geosynthetics - Abrasion damage simulation (sliding block test) (ISO 13427:2014)
UNE 135203-2:2010 Road signalisation equipment. Horizontal signalisation. Materials. Laboratory abrasion tests. Part 2: Determination of the abrasion resistance by falling abrasive method.
UNE-EN 12697-16:2017 Bituminous mixtures - Test methods - Part 16: Abrasion by studded tyres

KR-KS, Wear Test Analysis

KS P ISO TR 14569-1-2019 Dental materials — Guidance on testing of wear — Part 1: Wear by toothbrushing
KS K ISO TR 4918-2008 Textile floor coverings－Determination of wear－Castor chair test
KS K ISO 13427-2016 Geotextiles and geotextile-related products－Abrasion damage simulation(sliding block test)
KS C IEC 60068-2-70-2020 Environmental Testing — Part 2-70: Tests Xb: abrasion of markings and letterings caused by rubbing of fingers and hands
KS K ISO 12947-1-2019 Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 1: Martindale abrasion testing apparatus
KS M ISO 23794-2017 Rubber, vulcanized or thermoplastic－Abrasion testing－Guidance
KS P ISO 18192-1-2020 Implants for surgery — Wear of total intervertebral spinal disc prostheses — Part 1: Loading and displacement parameters for wear testing and corresponding environmental conditions for test

Military Standard of the People's Republic of China-General Armament Department, Wear Test Analysis

GJB 17.9-1984 Aviation wire and cable test methods Abrasion test

PL-PKN, Wear Test Analysis

PN C89081-1969 Plastics Abrasion test by abrasive paper
PN P04605-10-1991 Wear tests of textile cloth articles Determination of resistance to being shiny
PN P04605-01-1988 Wear testing of textile cloth articles General principles
PN P04605-16-1992 Wear tests of textile cloth articles Result report
PN P04605-03-1991 Wear tests of textile cloth artioles Determination of the resistance to crease
PN P84677-1991 Wear testing of individual protection means. General principles
PN C94300-030-1988 Tires and tubes Tire tread abrasion test on -roads
PN P04605-07-1988 Wear testing of textile cloth articles Determination of dimensional change
PN P04605-11-1990 Wear tests of textile cloth articles Determination of the resistance to bagginess
PN-EN ISO 28080-2021-08 E Hardmetals -- Abrasion tests for hardmetals (ISO 28080:2021)
PN P04605-12-1989 Wear testing of textile cloth articles Determination of thread shifting in seam

Japanese Industrial Standards Committee (JISC), Wear Test Analysis

JIS K 6264:1993 Abrasion testing methods of vulcanized rubber
JIS H 8682-1:1999 Test methods for abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys -- Part 1: Wheel wear test
JIS A 1121:1993 Method of test for resistance to abrasion of coarse aggregates by use of the Los Angeles machine
JIS H 8682-3:1999 Test methods for abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys -- Part 3: Sand-falling abrasion resistance test
JIS A 1120:1976 Method of test for abrasion of coarse aggregate by use of the deval machine
JIS K 6404-22:1999 Testing methods for rubber-or plastics-coated fabrics -- Part 22: Determination of abrasion resistance
JIS R 2252-1:2007 Test method for abrasion resistance of refractory products -- Part 1: Method at room temperature
JIS R 2252-2:2007 Test method for abrasion resistance of refractory products -- Part 2: Method at elevated temperature

National Metrological Verification Regulations of the People's Republic of China, Wear Test Analysis

JJG(机械) 102-1992 Verification rules for ring block wear testing machine

RO-ASRO, Wear Test Analysis

STAS 9639-1981 Tests of metals TEST TO WEAR ON ROTARY DISK WITH ABRASIVE PAPER
STAS 12046/1-1981 Cutting life testing WEAR General notions

GM Daewoo, Wear Test Analysis

GMKOREA EDS-T-7697-2011
GMKOREA EDS-T-7706-2011 Test Method for Determining 4-Ball Test Welding Force and Welding Wear

Professional Standard - Light Industry, Wear Test Analysis

QB/T 5101-2017 Test method for abrasion resistance of plastics pipes

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Wear Test Analysis

GB/T 3960-2016 Plastics—Test method for friction and wear by sliding
GB/T 33725-2017 Watch cases and accessories—Tests of the resistance to wear, scratching and impacts

National Metrological Technical Specifications of the People's Republic of China, Wear Test Analysis

JJF(纺织) 095-2020 Calibration Specification for Geotextiles Abrasion Testers
JJF(纺织)095-2020 Calibration Specification for Geotextiles Abrasion Testers

Professional Standard - Electricity, Wear Test Analysis

DL/T 465-2007 Determination of the impingement abrasion index of coal
DL/T 465-1992 Test method for scour wear index of coal
DL/T 1693-2017 Test method for wear of transmission line fittings

Professional Standard - Chemical Industry, Wear Test Analysis

HG/T 3221-1987 Technical condition and test methods for glass-lined equipment
HG/T 3221-2009 Viterous and porcelain enamels.Determination of the resistance to abrasion

Professional Standard - Non-ferrous Metal, Wear Test Analysis

YS/T 700-2009 Abrasion method of cathode blocks used in the production of aluminium

国家市场监督管理总局、中国国家标准化管理委员会, Wear Test Analysis

GB/T 39291-2020 Test method for impact wear properties of studs
GB/T 40398.1-2021 Test method for C-C composites—Part 1: Friction and wear property

Professional Standard - Energy, Wear Test Analysis

NB/SH/T 0944.2-2020 Determination of anti-wear properties of lubricants FE8 Rolling bearing wear test machine method Part 2: Lubricating grease

International Electrotechnical Commission (IEC), Wear Test Analysis

IEC 60068-2-70:1995 Environmental testing - Part 2: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands
IEC 61196-1-324:2006 Coaxial communication cables - Part 1-324: Mechanical test methods - Test for abrasion resistance of cable

The American Road & Transportation Builders Association, Wear Test Analysis

AASHTO TP 108-2014 Standard Method of Test for Determining the Abrasion Loss of Asphalt Mixture Specimens

AASHTO - American Association of State Highway and Transportation Officials, Wear Test Analysis

TP 108-2014 Standard Method of Test for Determining the Abrasion Loss of Asphalt Mixture Specimens

Professional Standard - Building Materials, Wear Test Analysis

JC/T 2102-2012 Wear test procedure on inertia dynamometer for brake friction materials
JC 329-1982 Test method for abrasion of mosaic tiles and ceramic floor tiles

Professional Standard - Aerospace, Wear Test Analysis

QJ 1238.14-1987 Abrasion Test of Cable Test Method on Missile Launch Vehicle

Anhui Provincial Standard of the People's Republic of China, Wear Test Analysis

DB34/T 3220-2018 Test method for abrasion resistance of cleaning brushes of sanitation vehicles

水利部, Wear Test Analysis

SL/T 814-2021 Wear test method of turbine flow parts

American National Standards Institute （ANSI), Wear Test Analysis

ANSI/EIA 364-85:1996 TP-85, General Test Procedure for Assessing Wear and Mechanical Damage Testing of Contact Finishes for Electrical Connectors
ANSI/SAE J339-1994 Seat Belt Assembly Webbing Abrasion Test Procedure

Electronic Components, Assemblies and Materials Association, Wear Test Analysis

ECA 364-85-1996 TP-85 General Test Procedure for Assessing Wear and Mechanical Damage Testing of Contact Finishes for Electrical Connectors

CZ-CSN, Wear Test Analysis

CSN 56 0512-17-1995 Methods of milled products analysis - Part 17: Determination of damage starch

AT-ON, Wear Test Analysis

ONORM S 1413 Teil.2-1989 Textile jloor coverings; determination of the wearing process; drum test, fraying behaviour of pile carpets
OENORM EN ISO 6370-1:2021 Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 1: Abrasion testing apparatus (ISO 6370-1:1991)
ONORM M 8125-1994 Tribotechnique - Testing of friction and wear - Model test: System ball-on-disc

未注明发布机构, Wear Test Analysis

BS EN 1071-6:2007(2010) Advanced technical ceramics — Methods of test for ceramic coatings — Part 6 : Determination of the abrasion resistance of coatings by a micro - abrasion wear test

JSAE - Society of Automotive Engineers of Japan@ Inc., Wear Test Analysis

JASO M354-1999 Automobile diesel engine oils - Valve train wear test
JASO M354-2006 Automobile diesel engine oils - Valve train wear test

Professional Standard - Automobile, Wear Test Analysis

QC/T 642-2000 Test method for abrasion of flocked weather strips for vehicles

工业和信息化部, Wear Test Analysis

YB/T 4993-2022 Test methods for friction and wear properties of carbon materials

中国石油化工总公司, Wear Test Analysis

SH/T 0215-1992 Anti-rust grease deposition value and wear resistance test method

Professional Standard - Medicine, Wear Test Analysis

YY/T 0651.1-2016 Implants for surgery.Wear of total hip-joint prostheses.Part 1:Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
YY/T 0651.1-2008 Implant for surgery.Wear of total hip-joint prostheses.Part 1:Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
YY/T 0652-2008 Wear of implant materials.Polymer and metal wear particles.Isolation,characterization and quantification
YY/T 1426.1-2016 Implants for surgery.Wear of total knee-joint prostheses.Part 1:Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test

AGMA - American Gear Manufacturers Association, Wear Test Analysis

94FTM9-1994 Analytical and Experimental Vibration Analysis of a Damaged Gear

CH-SNV, Wear Test Analysis

SN EN ISO 6370-1:2021 Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 1: Abrasion testing apparatus (ISO 6370-1:1991)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Wear Test Analysis

ASHRAE PH-97-6-1-1997 Experimental Analysis of Cycling Losses in Domestic Refrigerator-Freezers

DE-VDA, Wear Test Analysis

VDA 230-211-2008 Abrasion test on leather - Determination of the abrasion resistance of leather surfaces using the Martindale abrasion testing apparatus and a ball plate

American Gear Manufacturers Association, Wear Test Analysis

AGMA 94FTM9-1994 Analytical and Experimental Vibration Analysis of a Damaged Gear

GOSTR, Wear Test Analysis

GOST R ISO 14242-1-2020 Implants for surgery. Wear of total hip-joint prostheses. Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test

VN-TCVN, Wear Test Analysis

TCVN 7424-1-2004 Textiles.Determination of the abrasion resistance of fabrics by the Martindale method.Part 1:Martindale abrasion testing apparatus

BG-BDS, Wear Test Analysis

BGC EN ISO 13427:2001 Geotextiles and geotextile-related products - Abrasion damage simulation (sliding block test)

BELST, Wear Test Analysis

STB 1448-2004 Tribo-fatigue. Wear-fatigue test methods. Mechano-sliding fatigue tests
STB 1233-2000 Tribo-fatigue. Wear-fatigue tests methods. Accelerated mechano-rolling fatigue tests

ZA-SANS, Wear Test Analysis

SANS 4918:1990 Textile floor coverings - Determination of wear - Castor chair test

GM Global, Wear Test Analysis

GMW 3283-2011 Schopper Abrasion Wear Test Issue 2; English

European Association of Aerospace Industries, Wear Test Analysis

AECMA PREN 3745-503-2000 Aerospace Series Fibres and Cables, Optical, Aircraft Use Test Methods Part 503: Scrape Abrasion Edition P 1

国家食品药品监督管理局, Wear Test Analysis

YY/T 1426.3-2017 Wear of surgical implant total knee prostheses Part 3: Load and displacement parameters of displacement-controlled wear testing machines and related test environmental conditions

国家药监局, Wear Test Analysis

YY/T 0651.3-2020 Wear of surgical implant total hip prostheses Part 3: Load and displacement parameters of orbital bearing type wear testing machines and related test environmental conditions

Society of Automotive Engineers (SAE), Wear Test Analysis

SAE J1454-2006 Dynamic Durability Testing of Seat Cushions for Off-Road Work machines