ZH
RU
ES

Optical cable abrasion test

Optical cable abrasion test, Total:500 items.

In the international standard classification, Optical cable abrasion test involves: Electrical wires and cables, Fibre optic communications, Aerospace electric equipment and systems, Testing of metals, On-board equipment and instruments, Fruits. Vegetables, Surface treatment and coating, Components and accessories for telecommunications equipment, Mechanical testing, Plastics, Construction materials, Equipment for petroleum and natural gas industries, Glass, Dentistry, Rubber and plastics products, Electrical and electronic testing, Products of the textile industry, Wood, sawlogs and sawn timber, Cutting tools, Graphic technology, Test conditions and procedures in general, Iron and steel products, Paints and varnishes, Road vehicles in general, Non-ferrous metals, Tyres, Protection of and in buildings, Rubber, Analytical chemistry, Paper products, Wood-based panels, Linear and angular measurements, Clothes, Footwear, Fuels, Equipment for the chemical industry, Products of the chemical industry, Power transmission and distribution networks, Insulating materials, Seals, glands, Ceramics, Elements of buildings, Pipeline components and pipelines, Road vehicle systems, Powder metallurgy, Miscellaneous domestic and commercial equipment, Hydraulic energy engineering, Electrical accessories, Materials for aerospace construction, Medical equipment, Road engineering, Environmental testing, Raw materials for rubber and plastics, Cellular materials, Protection against fire, Conducting materials, Leather technology, Lubricants, industrial oils and related products, Flexible drives and transmissions, Non-textile floor coverings, Optical equipment, Agricultural machines, implements and equipment, Particle size analysis. Sieving, Gears, Horology, Refractories, Installations in buildings, Earth-moving machinery.

BR-ABNT, Optical cable abrasion test

ABNT NBR 13517-2010 Optical cables - Abrasion test - Method of test
ABNT NBR 9498-2011 Safety glass - Test method for abrasion

German Institute for Standardization, Optical cable abrasion test

DIN VDE 0472-605:1985 Testing of cables, insulated wires and flexible cords; abrasion
DIN EN 3745-511:2002-12 Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 511: Cable to cable abrasion; German and English version EN 3745-511:2002
DIN EN 3745-703:2007 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 703: Durability of manufacturer's marking; German and English version EN 3745-703:2005
DIN EN 3475-511:2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 511: Cable-to-cable abrasion; German and English version EN 3475-511:2002
DIN 52347:1987 Testing of glass and plastics; abrasion test; method using abrasion wheels and measurement of scattered light
DIN 13973-1:2008 Dental materials - Guidance on testing of wear - Part 1: Wear by toothbrushing (ISO/TR 14569-1:2007)
DIN 50315:2010 Testing of metallic abrasives by centrifugal blasting - Wear testing, efficiency testing
DIN 52348:1985-02 Testing of glass and plastics; abraison test; sand trickling method
DIN EN 3745-511:2002 Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 511: Cable to cable abrasion; German and English version EN 3745-511:2002
DIN 8978:1973 Wear test for refrigerant compressors
DIN 54607:2014 Tissue paper and tissue products - Determination of dry colour abrasion of table decoration products - Abrasion test
DIN EN ISO 13427:2015-03 Geosynthetics - Abrasion damage simulation (sliding block test) (ISO 13427:2014); German version EN ISO 13427:2014
DIN EN 4876:2021 Aerospace series - Environmental testing - Hand abrasion and fingerprint test on cabin touchscreen and pencil abrasion on signing touch pads; German and English version prEN 4876:2021
DIN EN 12773:2000 Footwear - Test methods for outsoles - Needle tear strength; German version EN 12773:1999
DIN 53754:1977 Testing of plastics; determination of abrasion, abrasive disk method
DIN EN 3745-503:2006-12 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 503: Scrape abrasion; German and English version EN 3745-503:2005
DIN 13973-1:2001 Dental materials - Guidance on testing of wear resistance - Part 1: Wear by tooth brushing (ISO/TS 14569-1:1999)
DIN 51191:2015-01 Vitreous and porcelain enamels - Sliding friction wear test using an abrasion wheel
DIN EN 60068-2-70:1996 Environmental testing - Part 2: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands (IEC 60068-2-70:1995); German version EN 60068-2-70:1996
DIN 53516:1987 Testing of rubber and elastomers; determination of abrasion resistance
DIN EN 12274-7:2005-08 Slurry surfacing - Part 7: Shaking abrasion test; German version EN 12274-7:2005
DIN 14811-3:1977 Fire hoses; abrasion test
DIN 51165-1:2023-05 Vitreous and porcelain enamels - Determination of the resistance to hydroabrasion - Part 1: Hydroabrasion testing apparatus / Note: Date of issue 2023-04-21
DIN 50315:1988 Testing the wear and effectiveness of metallic abrasives by centrifugal blasting
DIN EN 3475-511:2002-12 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 511: Cable-to-cable abrasion; German and English version EN 3475-511:2002 / Note: Applies in conjunction with DIN EN 3475-100 (2002-08).
DIN EN 12373-9:1999 Aluminium and aluminium alloys - Anodizing - Part 9: Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus; German version EN 12373-9:1998
DIN EN 1071-6:2008 Advanced technical ceramics - Methods of test for ceramic coatings - Part 6: Determination of the abrasion resistance of coatings by a micro-abrasion wear test; German version EN 1071-6:2007
DIN EN ISO 13427:1998 Geotextiles and geotextile-related products - Abrasion damage simulation (sliding block test) (ISO 13427:1998); German version EN ISO 13427:1998
DIN EN 13892-5:2003 Methods of test for screed materials - Part 5: Determination of wear resistance to rolling wheel of screed materials for wearing layer; German version EN 13892-5:2003
DIN 53863-1:1960 Testing of textiles; abrasion test methods for textile planar fabrics, principles
DIN EN 13892-4:2003 Methods of test for screed materials - Part 4: Determination of wear resistance BCA; German version EN 13892-4:2002

IN-BIS, Optical cable abrasion test

Military Standard of the People's Republic of China-General Armament Department, Optical cable abrasion test

GJB 17.9-1984 Aviation wire and cable test methods Abrasion test

European Association of Aerospace Industries, Optical cable abrasion test

AECMA PREN 3745-503-2000 Aerospace Series Fibres and Cables, Optical, Aircraft Use Test Methods Part 503: Scrape Abrasion Edition P 1
AECMA PREN 3745-511-1997 Aerospace Series Fibres and Cables, Optical, Aircraft Use Test Methods Part 511: Cable to Cable Abrasion Edition P 1
AECMA PREN 3745-511-1996 Aerospace Series Fibres and Cables, Optical, Aircraft Use Test Methods Part 511: Cable to Cable Abrasion Edition H
AECMA PREN 3475-511-1994 Aerospace Series Electrical Cables for Aircrafts Use Test Methods Part 511: Cable-to-Cable Abrasion
AECMA PREN 3475-511-1997 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 511: Cable-to-Cable Abrasion Edition P 1
AECMA PREN 6059-403-1997 Aerospace Series Electrical Cables, Installation Protection Sleeves Test Methods Part 403: Scrape Abrasion Edition P 1

Danish Standards Foundation, Optical cable abrasion test

DS/EN 3745-511:2002 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 511: Cable to cable abrasion
DS/EN 3745-503:2006 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 503: Scrape abrasion
DS/ISO 28080:2021 Hardmetals – Abrasion tests for hardmetals
DS/EN 3475-503:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 503: Scrape abrasion
DS/EN 12274-7:2006 Slurry surfacing - Test methods - Part 7: Shaking abrasion test
DS/EN 3475-511:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 511: Cable-to-cable abrasion
DS/EN ISO 28080:2021 Hardmetals – Abrasion tests for hardmetals (ISO 28080:2021)
DS/EN ISO 13427:1999 Geotextiles and geotextile-related products - Abrasion damage simulation (sliding block test)
DS/EN 60811-409:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths

Lithuanian Standards Office , Optical cable abrasion test

LST EN 3745-511-2003 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 511: Cable to cable abrasion
LST EN 3745-503-2006 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 503: Scrape abrasion
LST EN 3475-503-2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 503: Scrape abrasion
LST EN 12274-7-2005 Slurry surfacing - Test methods - Part 7: Shaking abrasion test
LST EN 3475-511-2003 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 511: Cable-to-cable abrasion

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Optical cable abrasion test

GB/T 12444.1-1990 Metallic materials--Wear tests MM mode wear test
GB/T 12444.2-1990 Metallic materials--Wear tests Block-on-ring wear test
GB/T 12444-2006 Metallic materials Wear test method Block on ring sliding wear test
GB/T 5478-1985 Test method for wear of plastics by rolling
GB/T 5478-2008 Plastics-Test method for wear by rolling
GB/T 3960-1983 Test method for friction and wear of plastics by sliding
GB 3960-1983 Test method for friction and wear of plastics by sliding
GB/T 12812-1991 Test method for tumbling friability of rigid cellular plastics
GB/T 12967.2-1991 Anodizing of aluminium and aluminium alloys--Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus

Professional Standard - Aerospace, Optical cable abrasion test

QJ 1238.14-1987 Abrasion Test of Cable Test Method on Missile Launch Vehicle

European Committee for Standardization (CEN), Optical cable abrasion test

EN 3745-511:2002 Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 511: Cable-to-cable abrasion
EN 1097-9:2014 Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test
EN ISO 28080:2021 Hardmetals - Abrasion tests for hardmetals (ISO 28080:2021)
EN 3475-511:2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 511: Cable-to-cable abrasion
EN 1071-6:2007 Advanced technical ceramics - Methods of test for ceramic coatings - Part 6: Determination of the abrasion resistance of coatings by a micro-abrasion wear test
EN 13892-5:2003 Methods of test for screed materials - Part 5: Determination of wear resistance to rolling wheel of screed material for wearing layer

PL-PKN, Optical cable abrasion test

PN P04605-10-1991 Wear tests of textile cloth articles Determination of resistance to being shiny
PN C89081-1969 Plastics Abrasion test by abrasive paper
PN P04605-01-1988 Wear testing of textile cloth articles General principles
PN P04605-16-1992 Wear tests of textile cloth articles Result report
PN P04605-03-1991 Wear tests of textile cloth artioles Determination of the resistance to crease
PN P84677-1991 Wear testing of individual protection means. General principles
PN C94300-030-1988 Tires and tubes Tire tread abrasion test on -roads
PN P04605-07-1988 Wear testing of textile cloth articles Determination of dimensional change
PN P04605-11-1990 Wear tests of textile cloth articles Determination of the resistance to bagginess
PN-EN ISO 28080-2021-08 E Hardmetals -- Abrasion tests for hardmetals (ISO 28080:2021)

Association Francaise de Normalisation, Optical cable abrasion test

NF EN 3745-511:2003 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 511 : abrasion câble à câble
NF EN 3745-503:2006 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 503 : abrasion par raclage
NF L52-250-511*NF EN 3475-511:2003 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 511 : cable-to-cable abrasion
NF L52-400-511*NF EN 3745-511:2003 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 511 : cable to cable abrasion
NF T30-015:1991 Paints and varnishes. Abrasion resistance test.
NF EN ISO 13427:2015 Géosynthétiques - Simulation de l'endommagement par abrasion (essai du bloc glissant)
NF EN 3475-503:2002 Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essai - Partie 503 : abrasion par raclage
NF G62-115*NF EN ISO 17693:2005 Footwear - Test methods for uppers - Resistance to damage on lasting
NF C32-011-409*NF EN 60811-409:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 409 : miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths
NF A95-189:2021 Hardmetals - Abrasion tests for hardmetals
NF EN 3475-511:2003 Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 511 : abrasion câble-à-câble
XP S91-252-1*XP ISO/TS 14569-1:2002 Dental materials - Guidance on testing of wear resistance - Part 1 : wear by tooth brushing
NF P98-857-7*NF EN 12274-7:2005 Slurry surfacing - Test methods - Part 7 : shaking abrasion test
NF P18-650-9*NF EN 1097-9:2014 Tests for mechanical and physical properties of aggregates - Part 9 : determination of the resistance to wear by abrasion from studded tyres - Nordic test
NF G38-122*NF EN ISO 13427:2015 Geosynthetics - Abrasion damage simulation (sliding block test)
NF L52-400-503*NF EN 3745-503:2006 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 503 : scrape abrasion
NF B10-508:1973 Quarry products. Limestones. Abrasion test using a metal disc.
NF A05-002-1*NF EN ISO 6370-1:2021 Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 1 : abrasion testing apparatus
NF EN ISO 26424:2016 Céramiques techniques - Détermination de la résistance à l'abrasion des revêtements par essai d'abrasion à micro-échelle
NF EN 12274-7:2005 Matériaux bitumineux coulés à froid - Méthodes d'essai - Partie 7 : essai d'abrasion par agitation
NF L17-043*NF EN 4864:2020 Aerospace series - Environmental testing - High dynamic abrasion, mar, scratch and punch test in cabin interior
NF EN 60811-409:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 409 : essais divers - Essai de perte de masse des enveloppes isolantes et gaines thermoplastiques
NF G07-178-1*NF EN ISO 12947-1:1999 Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 1 : Martindale abrasion testing apparatus
NF T43-020:2010 Rubber, vulcanized or thermoplastic - Abrasion testing - Guidance.
NF T43-020*NF ISO 23794:2015 Rubber, vulcanized or thermoplastic - Abrasion testing - Guidance
NF S94-173-1*NF ISO 14242-1:2014 Implants for surgery - Wear of total hip-joint prostheses - Part 1 : loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
NF ISO 14242-1:2014 Implants chirurgicaux - Usure des prothèses totales de l'articulation de la hanche - Partie 1 : paramètres de charge et de déplacement pour machines d'essai d'usure et conditions environnementales correspondantes d'essai
NF P14-204-5*NF EN 13892-5:2004 Methods of test for screed materials - Part 5 : determination of wear resistance to rolling wheel of screed material for wearing layer
NF D14-501:2012 Sanitary appliances - Resistance to abrasion of enamelled surfaces - Test method.
NF D14-501:1985 Sanitary appliances. Resistance to abrasion of enamelled surfaces. Test method.

GM North America, Optical cable abrasion test

GM GMN10030-2002 Belt Abrasion Wear Test
GM GM9516P-1988 Wear Resistance - Canvas Belt Wear Tester

GM Europe, Optical cable abrasion test

GME 6755-2008 Tire Wear Test

Professional Standard - Machinery, Optical cable abrasion test

JB/T 7506-1994 Solid abrasive grain abrasion test. Pin-sand paper disc sliding abrasion method
JB/T 7705-1995 Abrasion test method for loose abrasive grains Rubber wheel method
JB/T 9396-1999 The compensating exfension wires for tungsten - rhenium thermocouples
JB/T 9396-2013 Ring-block wear testing machines.Technical specification
JB/T 8820-1998 Motorcycle transmission chains.Testing rules of wear performance
JB/T 8820-2013 Motorcycle transmission chains.Testing rules of wear performance
JB/T 9758-2004 Fast simulation test procedure for cylinder liners and rings

International Electrotechnical Commission (IEC), Optical cable abrasion test

IEC 61196-1-324:2006 Coaxial communication cables - Part 1-324: Mechanical test methods - Test for abrasion resistance of cable
IEC 60811-409:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths
IEC 60068-2-70:1995 Environmental testing - Part 2: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands
IEC 60794-1-23:2019 RLV Optical fibre cables - Part 1-23: Generic specification - Basic optical cable test procedures - Cable element test methods
IEC 60794-1-23:2012 Optical fibre cables - Part 1-23: Generic specification - Basic optical cable test procedures - Cable element test methods
IEC 60794-1-308:2023 Optical fibre cables - Part 1-308: Generic specification - Basic optical cable test procedures - Cable element test methods – Ribbon residual twist test, method G8
IEC 60794-1-23:2019 Optical fibre cables - Part 1-23: Generic specification - Basic optical cable test procedures - Cable element test methods

American Society for Testing and Materials (ASTM), Optical cable abrasion test

ASTM G176-03 Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test8212;Cumulative Wear Method
ASTM G176-03(2017) Standard Test Method for Ranking Resistance of Plastics to Sliding Wear Using Block-on-Ring Wear Test—Cumulative Wear Method
ASTM G132-96 Standard Test Method for Pin Abrasion Testing
ASTM G132-96(2001) Standard Test Method for Pin Abrasion Testing
ASTM G132-96(2007) Standard Test Method for Pin Abrasion Testing
ASTM G132-96(2018) Standard Test Method for Pin Abrasion Testing
ASTM G137-97(2009) Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration
ASTM G176-03(2009) Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test8212;Cumulative Wear Method
ASTM G77-05 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
ASTM G77-05e1 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
ASTM G77-98 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
ASTM D5181-91(1997)e1 Standard Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester
ASTM D5181-04 Standard Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester
ASTM D5181-09 Standard Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester
ASTM G77-05(2010) Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
ASTM D5181-09(2017) Standard Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester
ASTM D6279-15 Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings
ASTM D6037-13 Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings
ASTM G77-17(2022) Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
ASTM D4966-12 Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
ASTM D4158-92 Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)
ASTM D4158-01 Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)
ASTM D4158-08(2016) Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)
ASTM D4058-96(2020) Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
ASTM D6279-99e1 Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings
ASTM D6279-20 Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings
ASTM D3885-99 Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM G99-05(2016) Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM D3181-95(2002) Standard Guide for Conducting Wear Tests on Textiles
ASTM D3181-95(2008) Standard Guide for Conducting Wear Tests on Textiles
ASTM G98-02(2009) Standard Test Method for Galling Resistance of Materials
ASTM D4685/D4685M-15(2020) Standard Test Method for Pile Fabric Abrasion
ASTM D3181-15e1 Standard Guide for Conducting Wear Tests on Textiles
ASTM G77-17 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
ASTM D4213-96e1 Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss
ASTM D4213-96(2003) Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss
ASTM D4213-08 Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss
ASTM G206-17(2021)e1 Standard Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating Wear Tests
ASTM D2228-02 Standard Test Method for Rubber Property-Relative Abrasion Resistance by the Pico Abrader Method
ASTM D3885-04 Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM E405-89(1996)e1 Standard Test Methods for Wear Testing Rotary Operators for Windows
ASTM E405-04 Standard Test Methods for Wear Testing Rotary Operators for Windows
ASTM G99-95a(2000)e1 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM G9-87(1998) Standard Test Method for Water Penetration into Pipeline Coatings
ASTM G99-05(2010) Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM E405-04(2012) Standard Test Methods for Wear Testing Rotary Operators for Windows
ASTM G99-17 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM G83-96 Standard Test Method for Wear Testing with a Crossed-Cylinder Apparatus
ASTM D4966-22 Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
ASTM D4966-12e1 Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
ASTM G98-91(1996)e1 Standard Test Method for Galling Resistance of Materials
ASTM D4685-07 Standard Test Method for Pile Fabric Abrasion
ASTM G98-02 Standard Test Method for Galling Resistance of Materials
ASTM G98-17(2022) Standard Test Method for Galling Resistance of Materials
ASTM G206-11 Standard Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating Wear Tests
ASTM G195-18 Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser
ASTM D3885-07a Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D3885-07a(2011) Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D3885-07a(2019) Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM G195-13a Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser
ASTM D3885-07A(2019)e1 Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM D3885-07a(2015) Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM G81-97a Standard Test Method for Jaw Crusher Gouging Abrasion Test
ASTM G81-97a(2007) Standard Test Method for Jaw Crusher Gouging Abrasion Test
ASTM G81-97a(2002)e1 Standard Test Method for Jaw Crusher Gouging Abrasion Test
ASTM G105-89(1997)e1 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
ASTM D2-33(1968) Method of Test for Abrasion of Rock by Use of the Deval Machine
ASTM G81-97a(2013) Standard Test Method for Jaw Crusher Gouging Abrasion Test
ASTM G105-20 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
ASTM G81-97a(2018) Standard Test Method for Jaw Crusher Gouging Abrasion Test
ASTM G105-16 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
ASTM D2714-94(2003) Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine
ASTM D2714-94(2009) Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine
ASTM F2497-05 Standard Practice for Abrasion and Scuff Resistance of Inkjet Media by the Sutherland Rub Tester
ASTM D1508-99 Standard Test Method for Carbon Black, Pelleted-Fines and Attrition
ASTM G190-06 Standard Guide for Developing and Selecting Wear Tests
ASTM G196-08 Standard Test Method for Galling Resistance of Material Couples
ASTM G190-15 Standard Guide for Developing and Selecting Wear Tests
ASTM D1508-12(2017) Standard Test Method for Carbon Black, Pelleted Fines and Attrition
ASTM D3181-15(2019) Standard Guide for Conducting Wear Tests on Textiles
ASTM C1353-07 Standard Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic
ASTM C1353-98(2006) Standard Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic
ASTM G195-21 Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser
ASTM G195-13 Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser
ASTM G195-22 Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser
ASTM G206-17 Standard Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating Wear Tests
ASTM D8182-18 Standard Test Method for Alloy Classification of Wear Debris using Laser-Induced Breakdown Spectroscopy (LIBS)
ASTM D1508-02e2 Standard Test Method for Carbon Black, Pelleted Fines and Attrition
ASTM D1508-02e1 Standard Test Method for Carbon Black, Pelleted Fines and Attrition
ASTM C1137-97 Standard Test Method for Degradation of Fine Aggregate Due to Attrition
ASTM D813-07 Standard Test Method for Rubber Deterioration-Crack Growth
ASTM D1508-02(2007) Standard Test Method for Carbon Black, Pelleted Fines and Attrition
ASTM D1508-02(2007)e1 Standard Test Method for Carbon Black, Pelleted Fines and Attrition
ASTM D3181-10 Standard Guide for Conducting Wear Tests on Textiles
ASTM D1508-12 Standard Test Method for Carbon Black, Pelleted Fines and Attrition
ASTM D813-07(2014) Standard Test Method for Rubber Deteriorationmdash;Crack Growth
ASTM D3885-02 Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
ASTM G195-08 Standard Guide for Conducting Wear Tests Using a Rotary Platform, Double-Head Abraser
ASTM F410-02 Standard Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement
ASTM F410-95 Standard Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement
ASTM F410-08 Standard Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement
ASTM F410-08(2017) Standard test method for wear layer thickness of resilient floor coverings by optical measurement
ASTM D2228-04 Standard Test Method for Rubber Property-Relative Abrasion Resistance by the Pico Abrader Method
ASTM D2228-04e1 Standard Test Method for Rubber Property-Relative Abrasion Resistance by the Pico Abrader Method
ASTM D2228-04(2009) Standard Test Method for Rubber Property-Relative Abrasion Resistance by the Pico Abrader Method
ASTM D2228-04(2015) Standard Test Method for Rubber Property&x2014;Relative Abrasion Resistance by Pico Abrader Method
ASTM D4058-96(2015) Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
ASTM D4058-96 Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
ASTM D4058-96(2001) Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
ASTM C1137-05 Standard Test Method for Degradation of Fine Aggregate Due to Attrition
ASTM D4058-96(2006) Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
ASTM D3181-95 Standard Guide for Conducting Wear Tests on Textiles
ASTM D5182-97e1 Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
ASTM D5182-97(2002)e1 Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
ASTM D4170-97 Standard Test Method for Fretting Wear Protection by Lubricating Greases
ASTM C1027-09 Standard Test Method for Determining Visible Abrasion Resistance of Glazed Ceramic Tile
ASTM D5159-91(1997) Standard Test Method for Dusting Attrition of Granular Activated Carbon
ASTM D5182-19 Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
ASTM D3181-15 Standard Guide for Conducting Wear Tests on Textiles
ASTM D515-88 Standard test method for dust abrasion of granular activated carbon
ASTM F1978-99 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber^TM Abraser
ASTM F1978-00e1 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber^TM Abraser
ASTM F1978-00(2007)e2 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
ASTM F1978-22 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
ASTM D2714-94(2014) Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine
ASTM D5537-99 Standard Test Method for Heat Release, Flame Spread and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
ASTM D5537-08 Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
ASTM F410-08(2013) Standard Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement
ASTM F410-08(2022) Standard Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement
ASTM G99-04a Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM G99-04 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM G99-05 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM C704-07 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature

BE-NBN, Optical cable abrasion test

British Standards Institution (BSI), Optical cable abrasion test

BS EN 3475-511:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Cable-to-cable abrasion
BS ISO 24469:2023 Road wear test of studded tyres
BS EN 3745-511:2002 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Cable to cable abrasion
BS ISO 6370-1:2011 Vitreous and porcelain enamels. Determination of the resistance to abrasion. Abrasion testing apparatus
BS EN 12747:1999 Footwear - Test methods for insoles - Abrasion resistance
BS EN 12770:2000 Footwear - Test methods for outsoles - Abrasion resistance
BS EN 3745-503:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 503: Scrape abrasion
BS EN 1071-6:2007 Advanced technical ceramics - Methods of test for ceramic coatings - Determination of the abrasion resistance of coatings by a micro-abrasion wear test
BS EN ISO 105-X12:2002 Textiles - Tests for colour fastness - Colour fastness to rubbing
BS ISO 28080:2011 Hardmetals. Abrasion tests for hardmetals
BS EN ISO 105-X12:2016 Textiles. Tests for colour fastness. Colour fastness to rubbing
BS EN 60794-1-23:2012 Optical fibre cables. Generic specification. Basic optical cable test procedures. Cable element test methods
BS EN 60811-409:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Loss of mass test for thermoplastic insulations and sheaths
BS ISO 14242-1:2014 Implants for surgery. Wear of total hip-joint prostheses. Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
BS ISO 14242-1:2002 Implants for surgery - Wear of total hip joint prostheses - Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
BS EN 12274-5:2003 Slurry surfacing. Test methods. Determination of wearing
BS EN 60794-1-2:2003 Optical fibre cables - Generic specification - Basic optical cable test procedures
BS EN 60794-1-22:2012 Optical fibre cables. Generic specification. Basic optical cable test procedures. Environmental test methods
BS EN IEC 60794-1-22:2018 Optical fibre cables. Generic specification. Basic optical cable test procedures. Environmental test methods
BS EN ISO 13427:2014 Tracked Changes. Geosynthetics. Abrasion damage simulation (sliding block test)
BS EN 13892-5:2003 Methods of test for screed materials - Determination of wear resistance to rolling wheel of screed material for wearing layer
BS ISO 19721:2022 Plastics. Abrasion test method for artificial turfs using combined UV exposure and mechanical wear
BS ISO 18192-1:2009 Implants for surgery. Wear of total intervertebral spinal disc prostheses. Loading and displacement parameters for wear testing and corresponding environmental conditions for test
BS ISO 18192-1:2011 Implants for surgery. Wear of total intervertebral spinal disc prostheses. Loading and displacement parameters for wear testing and corresponding environmental conditions for test
BS EN 60794-1-21:2015 Optical fibre cables. Generic specification. Basic optical cable test procedures. Mechanical tests methods
BS EN 50289-3-7:2001 Communication cables - Specifications for test methods - Mechanical test methods - Abrasion resistance of the cable sheath
BS 3900-E16:2000 Methods of test for paints - Determination of resistance to abrasion (reciprocating test panel method)
BS EN 60794-1-24:2014 Optical fibre cables. Generic specification. Basic optical cable test procedures. Electrical test methods
BS ISO 23794:2002 Rubber, vulcanized or thermoplastic - Abrasion testing - Guidance
12/30258913 DC BS ISO 14243-4. Implants for surgery. Wear of total knee prostheses. Part 4. Wear of the patella-femoral joint. Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
BS ISO 14242-1:2014+A1:2018 Implants for surgery. Wear of total hip-joint prostheses. Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
20/30383522 DC BS ISO 19721. Plastics. Abrasion test method for artificial turfs using combined UV exposure and mechanical wear
BS EN 50289-3-8:2001 Communication cables - Specifications for test methods - Mechanical test methods - Abrasion resistance of cable sheath markings
BS EN 50289-3-8:2013 Communication cables. Specifications for test methods. Mechanical test methods. Abrasion resistance of cable sheath markings
BS ISO 18192-1:2011+A1:2018 Implants for surgery — Wear of total intervertebral spinal disc prostheses Part 1 : Loading and displacement parameters for wear testing and corresponding environmental conditions for test
BS EN 1071-12:2010 Advanced technical ceramics - Methods of test for ceramic coatings - Reciprocating wear test
BS EN ISO 13427:1998 Geotextiles and geotextile-related products. Abrasion damage simulation (sliding block test)

RU-GOST R, Optical cable abrasion test

GOST 17367-1971 Metalls. Method of abrasion test by friction against embedded abragant grain
GOST R 55545-2013 Dental materials. Testing methods of wear. Part 1. Wear by toothbrushing
GOST 23.207-1979 Ensuring of wear resistance of products. Testing of engineering materials for impact abrasive wear
GOST IEC 60811-409-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 409. Miscellaneous tests. Loss of mass test for thermoplastic insulations and sheaths

SE-SIS, Optical cable abrasion test

SIS SS 22 72 10-1983 Paving products — Abrasion test

IT-UNI, Optical cable abrasion test

UNI 7858-1978
UNI EN ISO 28080:2021 Hardmetals - Abrasion tests for hardmetals

Taiwan Provincial Standard of the People's Republic of China, Optical cable abrasion test

CNS 14791-2003 Method of test for degradation of fine aggregate due to attrition
CNS 7641-1981 Method of Test for Fiber Optic Devices (Test Procedure for Fiber Optics Bundle Connector Insertion Loss)
CNS 490-1993 Method of Test for Resistance to Abrasion of Small Size Coarse Aggregates by Use of the Los Angeles Machine
CNS 11320-2000 Method of Test for Abrasion Resistance of Stone Subjected to Foot Traffic
CNS 14278-1998 Method of test for abrasion resistance of geotextiles (Sand paper/sliding block method)
CNS 3408-1985 Method of Test for Resistance to Abrasion of Large Size Coarse Aggregate by Use of the Los Angeles machine
CNS 9940-1986 Method of Test for Abrasion of Optical Glasses
CNS 11333-1985 Method of Test for Fiber Optic Devices (Fiber Optic Cable Fluid Immersion Test)
CNS 10878-1984 Method of Test for Fiber Optic Devices (Impact Testing of Cable Assemblies)

(U.S.) Ford Automotive Standards, Optical cable abrasion test

FORD FLTM BN 158-01-2009 MARTINDALE ABRASION TESTING OF TEXTILE FABRICS
FORD FLTM BN 161-01-2011 STEERING WHEEL WEAR RUB TEST
FORD FLTM BN 160-01-2011 LINEAR ABRASION TEST FOR SHIFT KNOBS
FORD FLTM BJ 016-1-2000 FOUR-BALL WEAR TEST FOR LUBRICATING FLUIDS
FORD FLTM AY 103-01-2000 ATTRITION TEST FOR MOLECULAR SIEVE BEADS [Replaced: FORD FLTM AY 003-01]

国家能源局, Optical cable abrasion test

SY/T 7496-2020 Casing wear test method
SH/T 0944.1-2017 Determination of anti-wear properties of lubricants FE8 rolling bearing wear tester method Part 1: Lubricating oils

ES-UNE, Optical cable abrasion test

UNE-EN 3745-511:2002 Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Part 511: Cable to cable abrasion (Endorsed by AENOR in August of 2002.)
UNE-EN 3745-503:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 503: Scrape abrasion (Endorsed by AENOR in March of 2006.)
UNE-EN 3475-511:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 511: Cable-to -cable abrasion (Endorsed by AENOR in August of 2002.)

Aerospace, Security and Defence Industries Association of Europe (ASD), Optical cable abrasion test

ASD-STAN PREN 3745-503-2000 Aerospace Series Fibres and Cables, Optical, Aircraft Use Test Methods Part 503: Scrape Abrasion (Edition P 1)
ASD-STAN PREN 3745-511-1997 Aerospace Series Fibres and Cables, Optical, Aircraft Use Test Methods Part 511: Cable to Cable Abrasion (Edition P 1)
ASD-STAN PREN 6059-403-1997 Aerospace Series Electrical Cables, Installation Protection Sleeves Test Methods Part 403: Scrape Abrasion (Edition P 1)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Optical cable abrasion test

PREN 3745-511-1996 Aerospace Series Fibres and Cables@ Optical@ Aircraft Use Test Methods Part 511: Cable to Cable Abrasion (Edition H)
PREN 3745-511-1997 Aerospace Series Fibres and Cables@ Optical@ Aircraft Use Test Methods Part 511: Cable to Cable Abrasion (Edition P 1)
PREN 3745-503-2000 Aerospace Series Fibres and Cables@ Optical@ Aircraft Use Test Methods Part 503: Scrape Abrasion (Edition P 1)
PREN 3475-511-1994 Aerospace Series Electrical Cables for Aircrafts Use Test Methods Part 511: Cable-to-Cable Abrasion

International Organization for Standardization (ISO), Optical cable abrasion test

ISO/TR 14569-1:2007 Dental materials - Guidance on testing of wear - Part 1: Wear by toothbrushing
ISO 24469:2023 Road wear test of studded tyres
ISO 17693:2004 Footwear - Test methods for uppers - Resistance to damage on lasting
ISO 20871:2001 Footwear - Test methods for outsoles - Abrasion resistance
ISO 20868:2001 Footwear - Test methods for insoles - Abrasion resistance
ISO 13427:2014 Geosynthetics - Abrasion damage simulation (sliding block test)
ISO 28080:2011 Hardmetals - Abrasion tests for hardmetals
ISO/TR 4918:1990 Textile floor coverings; determination of wear; castor chair test
ISO 28080:2021 Hardmetals - Abrasion tests for hardmetals
ISO 19721:2022 Plastics — Abrasion test method for artificial turfs using combined UV exposure and mechanical wear
ISO 6601:2002 Plastics - Friction and wear by sliding - Identification of test parameters
ISO 23794:2010 Rubber, vulcanized or thermoplastic - Abrasion testing - Guidance
ISO 23794:2003 Rubber, vulcanized or thermoplastic - Abrasion testing - Guidance
ISO 22731:2020 Carbonaceous materials used in the production of aluminium — Cathode — Cathode abrasion testing
ISO 23794:2023 Rubber, vulcanized or thermoplastic — Abrasion testing — Guidance
ISO 23794:2015 "Rubber, vulcanized or thermoplastic - Abrasion testing - Guidance"
ISO/TS 14569-2:2001 Dental materials - Guidance on testing of wear - Part 2: Wear by two- and/or three body contact
ISO 14635-3:2023 Gears — FZG test procedures — Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
ISO 13427:1998 Geotextiles and geotextile-related products - Abrasion damage simulation (sliding block test)

Korean Agency for Technology and Standards (KATS), Optical cable abrasion test

KS P ISO TR 14569-1:2013 Dental materials－Guidance on testing of wear－Part 1：Wear by toothbrushing
KS K 0607-2011 Test method for abrasion resistance of textile fabrics：Flexing and abrasion method
KS F 2215-2020 Method of abrasion test for wood
KS K 0525-2010 Test method for abrasion resistance of textile fabrics-Uniform abrasion method
KS K 0525-2015 Test method for abrasion resistance of textile fabrics－Uniform abrasion method
KS K 0525-2021 Test method for abrasion resistance of textile fabrics — Uniform abrasion method
KS D 0284-2005 Standard test method for abrasion resistance of pipeline coatings
KS D 8335-2001 Methods of wear resistance test for metallic coatings
KS D 8335-1986 Methods of wear resistance test for metallic coatings
KS K 0607-2006 Test method for abrasion resistance of textile fabrics：Flexing and abrasion method
KS K 0607-2017 Test method for abrasion resistance of textile fabrics：Flexing and abrasion method
KS M 6689-2008 Testing methods for abrasion resistance of rubber vulcanized(Pico abrader)
KS M 6689-1986 Testing methods for abrasion resistance of rubber vulcanized(Pico abrader)
KS K 0607-2022 Test method for abrasion resistance of textile fabrics: Flexing and abrasion method
KS M ISO 17693:2005 Footwear－Test methods for uppers－Resistance to damage on lasting
KS F 2508-2007 Method of test for resistance to abrasion of coarse aggregate by use of the Los Angeles machine
KS F 2508-2002 Method of test for resistance to abrasion of coarse aggregate by use of the Los Angeles machine
KS F 2508-1982 Method of test for resistance to abrasion of coarse aggregate by use of the Los Angeles machine
KS K ISO TR 4918:2008 Textile floor coverings－Determination of wear－Castor chair test
KS K ISO 12947-1:2008 Textiles-Determination of abrasion resistance of fabrics by the Martindale method-Part 1:Martindale abrasion testing apparatus
KS K ISO 12947-1:2014 Textiles — Determination of abrasion resistance of fabrics by the Martindale method — Part 1: Martindale abrasion testing apparatus
KS D 8314-1-2011(2021) Test methods for abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys－Part 1：Wheel wear test
KS D 8314-1-2011(2016) Test methods for abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys－Part 1：Wheel wear test
KS M ISO 6601:2003 Plastics－Friction and wear by sliding－Identification of test parameters
KS R 0079-2013(2018) Wear test procedure on inertia dynamometer-brake lining and pad
KS K 0609-2021 Test method for pile abrasive retention of corduroy fabrics
KS M ISO 6601-2003(2018) Plastics－Friction and wear by sliding－Identification of test parameters
KS R 0079-1987 Wear test procedure on inertia dynamometer-brake lining and pad
KS C 6923-2001 Test methods for attenuation of optical fibers
KS P ISO TS 14569-2:2010 Dental materials-Guidance on testing of wear-Part 2:Wear by two- and/or three body contact
KS P ISO TS 14569-2:2014 Dental materials — Guidance on testing of wear — Part 2: Wear by two- and/or three body contact
KS F 2811-2016(2021) Method of abrasion test for building materials and part of building construction (Method of abrasion test for flooring materials method with rotating disk fitted friction and impact)
KS M ISO 23794:2012 Rubber, vulcanized or thermoplastic-Abrasion testing-Guidance
KS M ISO 23794-2017(2022) Rubber, vulcanized or thermoplastic－Abrasion testing－Guidance
KS M ISO 23794:2017 Rubber, vulcanized or thermoplastic－Abrasion testing－Guidance
KS C IEC 60811-201:2020 Electric and optical fibre cables — Test methods for non-metallic Electric and optical fibre cables — Test methods for non-metallic insulation thickness
KS K ISO 13427-2016(2021) Geotextiles and geotextile-related products－Abrasion damage simulation(sliding block test)
KS D 8314-1-2011 Test methods for abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys-Part 1:Wheel wear test
KS R 0079-2013 Wear test procedure on inertia dynamometer-brake lining and pad

International Federation of Trucks and Engines, Optical cable abrasion test

NAVISTAR CEMS DT-10-2001 Rubbing Wear Test for Interior Components

API - American Petroleum Institute, Optical cable abrasion test

API STD 7CW-2015 Casing Wear Tests (First Edition)

Canadian General Standards Board （CGSB), Optical cable abrasion test

CGSB 1-GP-71 METH 101.1-1982 Methodes D'Essai Des Peintures Et Pigments Preparation Des Plaques En Fer-Blanc Methode Par Abrasion Ou Sans Abrasion
CGSB 1-GP-71 METH 104.1-1974 Methods of Testing Paints and Pigments Abrasion Resistance

Group Standards of the People's Republic of China, Optical cable abrasion test

T/CFA 010604.6-2018 Test method on three body abrasion of metallic materials
T/CFA 010604-3-2016 Test method on impact abrasion of steel and iron materials
T/CSTM 00646.1-2021 Ｍetal materials－Friction and wear testing with a pin-on-disk apparatus － Part 1: Friction and wear testing at ambient temperature
T/CSTM 00646.2-2021 Metal materials_—Friction and wear testing with a pin-on-disk apparatus — Part 2: Friction and wear testing at high-temperature
T/CFA 010604.05-2017 Test method on impact corrosion-abrasion of steel and iron materials
T/CSTM 00648-2021 Test method for synergistic effect of electrochemical corrosion-abrasive wear of metallic materials

ES-AENOR, Optical cable abrasion test

UNE 7 069

American National Standards Institute （ANSI), Optical cable abrasion test

ANSI/EIA/TIA 455-181:1992 Lightning Damage Susceptibility Test for Optic Cables with Metallic Components
ANSI/TIA/EIA 455-181-1992 Lightning Damage Susceptibility Test for Optic Cables with Metallic Components
ANSI/TIA-455-87-B-1993 Fiber Optic Cable Knot Test
ANSI/EIA 364-85:1996 TP-85, General Test Procedure for Assessing Wear and Mechanical Damage Testing of Contact Finishes for Electrical Connectors
ANSI/TIA/EIA 455-87B-1993 Knot Test for Fiber Optic Cable
ANSI/TIA/EIA 455-85A-1992 Fiber Optic Cable Twist Test
ANSI/EIA/TIA 455-85A:1992 Fiber Optic Cable Twist Test
ANSI/EIA/TIA 455-87B:1993 Knot Test for Fiber Optic Cable
ANSI/TIA/EIA 455-39B-1999 Fiber Optic Cable Water Wicking Test
ANSI/SAE J339-1994 Seat Belt Assembly Webbing Abrasion Test Procedure
ANSI/TIA-455-85A-1992 Fiber Optic Cable Twist Test
ANSI/TIA-455-87B-1993 Knot Test for Fiber Optic Cable
ANSI/TIA-455-85-A-1992 Fiber Optic Cable Twist Test
ANSI/TIA/EIA 455-100A-1989 Gas Leakage Test for Fiber Optic Cable
ANSI/EIA/TIA 455-100A:1989 Gas Leakage Test for Fiber Optic Cable
ANSI/EIA/TIA 455-86:1983 Fiber Optic Cable Jacket Shrinkage
ANSI/TIA-455-104-A-1993 Fiber Optic Cable Cyclic Flexing Test
ANSI/TIA-455-39B-1999 Fiber Optic Cable Water Wicking Test
ANSI/TIA-455-95A-2000 Absolute Optical Power Test for Optical Fibers and Cables
ANSI/SCTE TP007-1998 Test Method for Coaxial Cable Structural Return Loss
ANSI/TIA/EIA 455-107A-1999 Return Loss for Fiber Optic Components

Japanese Industrial Standards Committee (JISC), Optical cable abrasion test

JIS K 6264:1993 Abrasion testing methods of vulcanized rubber
JIS A 1121:1993 Method of test for resistance to abrasion of coarse aggregates by use of the Los Angeles machine
JIS A 1120:1976 Method of test for abrasion of coarse aggregate by use of the deval machine
JIS C 6851:2006 Optical fiber cable test procedures
JIS H 8682-1:1999 Test methods for abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys -- Part 1: Wheel wear test
JIS C 6870-1-22:2019 Optical fiber cables -- Part 1-22: Basic optical fiber cable test procedures -- Environmental test methods
JIS H 8682-3:1999 Test methods for abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys -- Part 3: Sand-falling abrasion resistance test

National Metrological Verification Regulations of the People's Republic of China, Optical cable abrasion test

JJG(机械) 102-1992 Verification rules for ring block wear testing machine

Standard Association of Australia （SAA）, Optical cable abrasion test

AS/NZS 4266.20:2004 Reconstituted wood-based panels - Methods of test - Resistance to surface abrasion (Taber abrasion test)
AS 2001.2.25.1:2006 Methods of test for textiles - Physical tests - Determination of the abrasion resistance of fabrics by the Martindale method - Martindale abrasion testing apparatus
AS 2001.2.26:1990 Methods of test for textiles - Physical tests - Determination of abrasion resistance of textile fabrics (flexing and abrasion method)

(U.S.) Telecommunications Industries Association , Optical cable abrasion test

TIA-455-87-B-1999(2013) FOTP-87 Fiber Optic Cable Knot Test
TIA-455-87-B-1993 FOTP-87 Fiber Optic Cable Knot Test
TIA-455-39-B-1999(2013) FOTP-39 Optical Fiber Cable Water Wicking Test
TIA-455-39-B-1999 FOTP-39 Optical Fiber Cable Water Wicking Test
TIA-455-25-C-2002 FOTP- 25 Impact Testing of Optical Fiber Cables
TIA-455-25-D-2016 FOTP-25 Impact Testing of Optical Fiber Cables

RO-ASRO, Optical cable abrasion test

STAS 9639-1981 Tests of metals TEST TO WEAR ON ROTARY DISK WITH ABRASIVE PAPER
STAS 12046/1-1981 Cutting life testing WEAR General notions

GM Daewoo, Optical cable abrasion test

GMKOREA EDS-T-7697-2011
GMKOREA EDS-T-7706-2011 Test Method for Determining 4-Ball Test Welding Force and Welding Wear

Professional Standard - Light Industry, Optical cable abrasion test

QB/T 5101-2017 Test method for abrasion resistance of plastics pipes

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Optical cable abrasion test

GB/T 3960-2016 Plastics—Test method for friction and wear by sliding
GB/T 17737.324-2018 Coaxial communication cables—Part 1-324: Mechanical test methods—Test for abrasion resistance of cable
GB/T 33725-2017 Watch cases and accessories—Tests of the resistance to wear, scratching and impacts

National Metrological Technical Specifications of the People's Republic of China, Optical cable abrasion test

JJF(纺织) 095-2020 Calibration Specification for Geotextiles Abrasion Testers
JJF(纺织)095-2020 Calibration Specification for Geotextiles Abrasion Testers

Professional Standard - Electricity, Optical cable abrasion test

DL/T 465-2007 Determination of the impingement abrasion index of coal
DL/T 465-1992 Test method for scour wear index of coal
DL/T 1693-2017 Test method for wear of transmission line fittings

Professional Standard - Chemical Industry, Optical cable abrasion test

HG/T 3221-1987 Technical condition and test methods for glass-lined equipment
HG/T 3221-2009 Viterous and porcelain enamels.Determination of the resistance to abrasion

Professional Standard - Non-ferrous Metal, Optical cable abrasion test

YS/T 700-2009 Abrasion method of cathode blocks used in the production of aluminium

国家市场监督管理总局、中国国家标准化管理委员会, Optical cable abrasion test

GB/T 39291-2020 Test method for impact wear properties of studs
GB/T 7424.23-2021 Optical fibre cable generic specification—Part 23：Basic optical cable test procedures—Cable element test methods
GB/T 7424.24-2020 Optical fibre cable generic specification—Part 24: Basic optical cable test procedures—Electrical test methods

Indonesia Standards, Optical cable abrasion test

SNI ISO 12947-1:2010 Textile - Determination of the abrasion resistance of fabrics by the Martindale method Part 1 : Martindale abrasion testing apparatus

The American Road & Transportation Builders Association, Optical cable abrasion test

AASHTO TP 108-2014 Standard Method of Test for Determining the Abrasion Loss of Asphalt Mixture Specimens

AASHTO - American Association of State Highway and Transportation Officials, Optical cable abrasion test

TP 108-2014 Standard Method of Test for Determining the Abrasion Loss of Asphalt Mixture Specimens

Professional Standard - Building Materials, Optical cable abrasion test

JC/T 2102-2012 Wear test procedure on inertia dynamometer for brake friction materials
JC 329-1982 Test method for abrasion of mosaic tiles and ceramic floor tiles

Society of Automotive Engineers (SAE), Optical cable abrasion test

SAE J1530-2011 Test Method for Determining Resistance to Fiber Loss, Resistance to Abrasion and Bearding Automotive Carpet Materials
SAE J1454-2006 Dynamic Durability Testing of Seat Cushions for Off-Road Work machines

Anhui Provincial Standard of the People's Republic of China, Optical cable abrasion test

DB34/T 3220-2018 Test method for abrasion resistance of cleaning brushes of sanitation vehicles

水利部, Optical cable abrasion test

SL/T 814-2021 Wear test method of turbine flow parts

Electronic Components, Assemblies and Materials Association, Optical cable abrasion test

ECA 364-85-1996 TP-85 General Test Procedure for Assessing Wear and Mechanical Damage Testing of Contact Finishes for Electrical Connectors

AT-ON, Optical cable abrasion test

ONORM S 1413 Teil.2-1989 Textile jloor coverings; determination of the wearing process; drum test, fraying behaviour of pile carpets
ONORM M 8125-1994 Tribotechnique - Testing of friction and wear - Model test: System ball-on-disc

AENOR, Optical cable abrasion test

UNE-EN ISO 13427:2015 Geosynthetics - Abrasion damage simulation (sliding block test) (ISO 13427:2014)
UNE-EN 12274-7:2007 Slurry surfacing - Part 7: Shaking abrasion test
UNE-EN 60811-409:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths

JSAE - Society of Automotive Engineers of Japan@ Inc., Optical cable abrasion test

JASO M354-1999 Automobile diesel engine oils - Valve train wear test
JASO M354-2006 Automobile diesel engine oils - Valve train wear test

Professional Standard - Automobile, Optical cable abrasion test

QC/T 642-2000 Test method for abrasion of flocked weather strips for vehicles

KR-KS, Optical cable abrasion test

KS K ISO TR 4918-2008 Textile floor coverings－Determination of wear－Castor chair test
KS K ISO 13427-2016 Geotextiles and geotextile-related products－Abrasion damage simulation(sliding block test)
KS M ISO 23794-2017 Rubber, vulcanized or thermoplastic－Abrasion testing－Guidance
KS C IEC 60811-201-2020 Electric and optical fibre cables — Test methods for non-metallic Electric and optical fibre cables — Test methods for non-metallic insulation thickness

工业和信息化部, Optical cable abrasion test

YB/T 4993-2022 Test methods for friction and wear properties of carbon materials

中国石油化工总公司, Optical cable abrasion test

SH/T 0215-1992 Anti-rust grease deposition value and wear resistance test method

DE-VDA, Optical cable abrasion test

VDA 230-211-2008 Abrasion test on leather - Determination of the abrasion resistance of leather surfaces using the Martindale abrasion testing apparatus and a ball plate

BG-BDS, Optical cable abrasion test

BGC EN ISO 13427:2001 Geotextiles and geotextile-related products - Abrasion damage simulation (sliding block test)

BELST, Optical cable abrasion test

STB 1448-2004 Tribo-fatigue. Wear-fatigue test methods. Mechano-sliding fatigue tests
STB 1233-2000 Tribo-fatigue. Wear-fatigue tests methods. Accelerated mechano-rolling fatigue tests

Professional Standard - Energy, Optical cable abrasion test

NB/SH/T 0944.2-2020 Determination of anti-wear properties of lubricants FE8 Rolling bearing wear test machine method Part 2: Lubricating grease

ZA-SANS, Optical cable abrasion test

SANS 4918:1990 Textile floor coverings - Determination of wear - Castor chair test

GM Global, Optical cable abrasion test

GMW 3283-2011 Schopper Abrasion Wear Test Issue 2; English

TIA - Telecommunications Industry Association, Optical cable abrasion test

TIA/EIA-455-25C-2002 FOTP-25 Impact Testing of Optical Fiber Cables

未注明发布机构, Optical cable abrasion test

BS EN 1071-6:2007(2010) Advanced technical ceramics — Methods of test for ceramic coatings — Part 6 : Determination of the abrasion resistance of coatings by a micro - abrasion wear test

European Committee for Electrotechnical Standardization（CENELEC）, Optical cable abrasion test

EN 60811-409:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths

Professional Standard - Medicine, Optical cable abrasion test

YY/T 0651.1-2016 Implants for surgery.Wear of total hip-joint prostheses.Part 1:Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test