ZH
RU
ES
Differential calorimeter method
Differential calorimeter method, Total:499 items.
In the international standard classification, Differential calorimeter method involves: Thermodynamics and temperature measurements, Analytical chemistry, Measurement of volume, mass, density, viscosity, Education, Ceramics, Aerospace electric equipment and systems, Plastics, Medical sciences and health care facilities in general, Optics and optical measurements, Surface treatment and coating, Products of the textile industry, Paint ingredients, Geology. Meteorology. Hydrology, Physics. Chemistry, Protection of and in buildings, Construction materials, Paint coating processes, Hydraulic energy engineering, Domestic, commercial and industrial heating appliances, Construction technology, Rubber, Construction industry, Textile fibres, Bottles. Pots. Jars, Ergonomics, Construction equipment, Fruits. Vegetables, Products of the chemical industry, Petroleum products in general, Glass, Coals, Test conditions and procedures in general, Environmental testing, Fuels, Farming and forestry, Energy and heat transfer engineering in general, Milk and milk products, Linear and angular measurements, Insulating fluids, Protection against fire, Insulating materials, Refractories, Telecommunication systems, Vocabularies, Electrical engineering in general, Optical equipment, Electrical and electronic testing, Protection against crime, Testing of metals, Waxes, bituminous materials and other petroleum products, Semiconducting materials, Protection against dangerous goods, Air quality, Lubricants, industrial oils and related products, TESTING, Elements of buildings, Paper products, Audio, video and audiovisual engineering, Technical drawings, Furniture, Equipment for petroleum and natural gas industries, Measurement of fluid flow, Organic chemicals, Reinforced plastics, Products of non-ferrous metals, Metrology and measurement in general, Bearings.
American Society for Testing and Materials (ASTM), Differential calorimeter method
- ASTM E967-18 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E967-08(2014) Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E1311-89(2004) Standard Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems
- ASTM E967-97 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E1269-05 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
- ASTM E126-92(1998) Standard Test Method for Inspection and Verification of Hydrometers
- ASTM E1269-01 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
- ASTM E1269-99 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
- ASTM E1269-04 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
- ASTM E2069-06(2018) Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
- ASTM E2069-19 Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
- ASTM E967-03 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E967-08 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E2041-03 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
- ASTM E2041-99 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
- ASTM E2041-01 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
- ASTM E2253-08 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
- ASTM E2253-21 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
- ASTM E2041-13e1 Standard Test Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
- ASTM E1356-98 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry or Differential Thermal Analysis
- ASTM E3142-18a(2023) Standard Test Method for Thermal Lag of Thermal Analysis Apparatus
- ASTM E3040-15 Standard Test Method for Evaluation of Instrumental Color Difference with a Gray Scale
- ASTM E1269-11 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
- ASTM E968-02(2014) Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
- ASTM E968-02(2008) Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
- ASTM E537-98 Standard Test Method for Assessing the Thermal Stability of Chemicals By Methods of Thermal Analysis
- ASTM E1269-11(2018) Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
- ASTM E2160-04(2018) Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
- ASTM E2160-23 Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
- ASTM E2716-23 Standard Test Method for Determining Specific Heat Capacity by Modulated Temperature Differential Scanning Calorimetry
- ASTM E2160-01 Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
- ASTM E2160-04 Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
- ASTM E2160-04(2012) Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
- ASTM D2244-02 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
- ASTM D2244-02e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
- ASTM D2244-05 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
- ASTM E793-06 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
- ASTM E537-20 Standard Test Method for Thermal Stability of Chemicals by Differential Scanning Calorimetry
- ASTM E2716-09 Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry
- ASTM E928-03 Standard Test Method for Determination of Purity by Differential Scanning Calorimetry
- ASTM E928-08(2014) Standard Test Method for Purity by Differential Scanning Calorimetry
- ASTM E2603-15 Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
- ASTM E537-07 Standard Test Method for The Thermal Stability Of Chemicals By Differential Scanning Calorimetry
- ASTM E537-02 Standard Test Method for The Thermal Stability Of Chemicals By Differential Scanning Calorimetry
- ASTM E537-12 Standard Test Method for The Thermal Stability of Chemicals by Differential Scanning Calorimetry
- ASTM E2206-02 Standard Method for Force Calibration Of Thermomechnical Analyzers
- ASTM E2744-10 Standard Test Method for Pressure Calibration of Thermal Analyzers
- ASTM E1363-97e1 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
- ASTM E2744-21 Standard Test Method for Pressure Calibration of Thermal Analyzers
- ASTM E2744-10(2015) Standard Test Method for Pressure Calibration of Thermal Analyzers
- ASTM E2744-16 Standard Test Method for Pressure Calibration of Thermal Analyzers
- ASTM E928-19 Standard Test Method for Purity by Differential Scanning Calorimetry
- ASTM E1952-17 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
- ASTM E1952-11 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
- ASTM E1952-23 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
- ASTM C518-17 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
- ASTM E2206-06 Standard Test Method for Force Calibration Of Thermomechnical Analyzers
- ASTM E2744-16e1 Standard Test Method for Pressure Calibration of Thermal Analyzers
- ASTM E2206-11 Standard Test Method for Force Calibration of Thermomechanical Analyzers
- ASTM E2206-21 Standard Test Method for Force Calibration of Thermomechanical Analyzers
- ASTM E2040-19 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
- ASTM E2206-11(2015) Standard Test Method for Force Calibration of Thermomechanical Analyzers
- ASTM E2113-09 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
- ASTM E1582-21 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
- ASTM D3523-92(2002) Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)
- ASTM D3523-92(2007) Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)
- ASTM E2716-09(2014) Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry
- ASTM E1952-01 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
- ASTM E1952-06 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
- ASTM E1952-98 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
- ASTM E2890-12(2018) Standard Test Method for Kinetic Parameters for Thermally Unstable Materials by Differential Scanning Calorimetry Using the Kissinger Method
- ASTM E2070-13(2018) Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
- ASTM E2070-23 Standard Test Methods for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
- ASTM E805-22 Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
- ASTM D2244-14 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
- ASTM E1543-00(2006) Standard Test Method for Noise Equivalent Temperature Difference of Thermal Imaging Systems
- ASTM E2253-03 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
- ASTM E1311-89(1999) Standard Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems
- ASTM E1543-00 Standard Test Method for Noise Equivalent Temperature Difference of Thermal Imaging Systems
- ASTM E2253-08e1 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
- ASTM E1311-89(2010) Standard Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems
- ASTM E1543-00(2011) Standard Test Method for Noise Equivalent Temperature Difference of Thermal Imaging Systems
- ASTM D4591-97 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
- ASTM D4591-01 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
- ASTM D4591-07 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
- ASTM D4591-07(2012) Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
- ASTM D4591-17 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
- ASTM E793-06(2012) Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
- ASTM E2918-18 Standard Test Method for Performance Validation of Thermomechanical Analyzers
- ASTM E1860-97a Standard Test Method for Elapsed Time Calibration Thermal Analyzers
- ASTM E1363-03 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
- ASTM E1860-07 Standard Test Method for Elapsed Time Calibration Thermal Analyzers
- ASTM E1860-02 Standard Test Method for Elapsed Time Calibration Thermal Analyzers
- ASTM E1582-17 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
- ASTM E1363-18 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
- ASTM E2918-18a Standard Test Method for Performance Validation of Thermomechanical Analyzers
- ASTM E1860-13(2018) Standard Test Method for Elapsed Time Calibration of Thermal Analyzers
- ASTM E2918-13 Standard Test Method for Performance Validation of Thermomechanical Analyzers
- ASTM E1860-13 Standard Test Method for Elapsed Time Calibration of Thermal Analyzers
- ASTM E1363-16 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
- ASTM E1363-13 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
- ASTM E1363-08 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
- ASTM E1363-23 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
- ASTM E1860-23 Standard Test Method for Elapsed Time Calibration of Thermal Analyzers
- ASTM E2918-23 Standard Test Method for Performance Validation of Thermomechanical Analyzers
- ASTM E2041-08e1 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
- ASTM E2603-08 Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
- ASTM D4591-22 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
- ASTM E1213-97 Standard Test Method for Minimum Resolvable Temperature Difference for Thermal Imaging Systems
- ASTM E1213-97(2002) Standard Test Method for Minimum Resolvable Temperature Difference for Thermal Imaging Systems
- ASTM E1356-03 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
- ASTM E793-01 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
- ASTM E793-95 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
- ASTM E793-06(2018) Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
- ASTM E1356-08 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
- ASTM E2070-03 Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
- ASTM E2070-00 Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
- ASTM E2113-04 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
- ASTM E2040-99 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
- ASTM E2040-03 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
- ASTM E2113-00 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
- ASTM E2040-08 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
- ASTM E2040-08(2014) Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
- ASTM D3418-03 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
- ASTM D3523-92(2012) Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)
- ASTM D4419-90(2005) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
- ASTM D4419-90(2010) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
- ASTM D3418-08 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
- ASTM E1356-08(2014) Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
- ASTM E1356-23 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
- ASTM C518-15 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
- ASTM E2070-13 Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
- ASTM E2069-06 Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
- ASTM E2069-00 Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
- ASTM E2069-06(2012) Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
- ASTM E698-23 Standard Test Method for Kinetic Parameters for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method
- ASTM E2113-18 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
- ASTM E2113-13 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
- ASTM E2113-23 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
- ASTM E2890-12 Standard Test Method for Kinetic Parameters for Thermally Unstable Materials by Differential Scanning Calorimetry Using the Kissinger Method
- ASTM E698-18 Standard Test Method for Kinetic Parameters for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method
- ASTM E698-16 Standard Test Method for Kinetic Parameters for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method
- ASTM E2890-12e1 Standard Test Method for Kinetic Parameters for Thermally Unstable Materials by Differential Scanning Calorimetry Using the Kissinger Method
- ASTM E1858-03 Standard Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
- ASTM E928-01 Standard Test Method for Determination of Purity by Differential Scanning Calorimetry
- ASTM E928-96 Standard Test Method for Determination of Purity by Differential Scanning Calorimetry
- ASTM E928-08 Standard Test Method for Determination of Purity by Differential Scanning Calorimetry
- ASTM E2009-23 Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
- ASTM E2009-08(2014)e1 Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
- ASTM E1858-08 Standard Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
- ASTM E1213-97(2009) Standard Test Method for Minimum Resolvable Temperature Difference for Thermal Imaging Systems
- ASTM E2253-16 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
- ASTM E2041-13(2018) Standard Test Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
- ASTM C1667-09 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels
- ASTM F1320-01(2006) Standard Test Method for Evaluating Thermal Paper Employing a Facsimile Thermal Printer as a Test Instrument
- ASTM D5591-22 Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
- ASTM C1667-07 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels
- ASTM D3895-04 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
- ASTM D3895-06 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
- ASTM D3895-02 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
- ASTM D3895-03 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
- ASTM E1858-08(2015)e1 Standard Test Methods for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
- ASTM D3895-14 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
- ASTM D6604-00 Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry
- ASTM D6604-00(2013) Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry
- ASTM D6604-00(2017) Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry
- ASTM D3523-92(1997) Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)
- ASTM E2253-11 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
- ASTM D3464-96(2001) Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
- ASTM D3464-96(2023) Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
- ASTM D3895-07 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
- ASTM E1858-97 Standard Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calirometry
- ASTM E1858-00 Standard Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
- ASTM E2009-02 Standard Test Method for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
- ASTM D4419-90(2000) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
- ASTM D4419-90(1995)e1 Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
- ASTM D4419-90(2015) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
- ASTM E2602-09(2015) Standard Test Methods for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
- ASTM D4419-90(2021) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
- ASTM E2041-23 Standard Test Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
- ASTM D231-62(1975)e1 Methods of Testing Tolerances for Knit Goods
- ASTM D6375-99a Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
- ASTM D6375-05 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
- ASTM D6375-09(2019) Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
- ASTM D6375-09(2014) Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer 40;TGA41; Noack Method
- ASTM E2164-01(2007) Standard Test Method for Directional Difference Test
- ASTM E2164-16 Standard Test Method for Directional Difference Test
- ASTM E2890-21 Standard Test Method for Determination of Kinetic Parameters and Reaction Order for Thermally Unstable Materials by Differential Scanning Calorimetry Using the Kissinger and Farjas Methods
- ASTM E2009-08 Standard Test Method for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
- ASTM E2009-99 Standard Test Method for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
- ASTM E2602-22 Standard Test Methods for Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
- ASTM E1858-23 Standard Test Methods for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
- ASTM E2602-09 Standard Test Method for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
- ASTM D5483-21 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
- ASTM D6186-08(2013) Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
Professional Standard - Machinery, Differential calorimeter method
- JB/T 6856-1993 Thermogravimetry-differential thermal analyzer
- JB/T 6856-2017 Thermogravimetric-Differential Thermal Analyzer
- JB/T 9369-1999 Differential thermal analyzer
- JB/T 9369-2017 Differential Thermal Analyzer
- JB/T 6298-1992 Test method of determining combustion characteristics of coal with thermal analyzer
- JB/T 8630-1997 Test method of determining melting heat, melting point and crystallization heat and crystallizing point of electrical insulation materials with differential scanning calorimetric method
- JB/T 6789-1993 Instrumentation industrial processing method code
- JB/T 5471-1991 Knobs for instrument and meter - Model designation method
- JB/T 9826-1999 Tractor differentials.Test methods
工业和信息化部/国家能源局, Differential calorimeter method
Professional Standard - Education, Differential calorimeter method
- JY/T 0589.5-2020 General Principles of Thermal Analysis Methods Part 5: Thermogravimetric-Differential Thermal Analysis and Thermogravimetric-Differential Scanning Calorimetry
- JY/T 0589.2-2020 General Principles of Thermal Analysis Methods Part 2: Differential Thermal Analysis
- JY/T 0589.3-2020 General Principles of Thermal Analysis Methods Part 3: Differential Scanning Calorimetry
- JY 0213-1994 Environment specification of tronsterence tore and tert for the mechanics heat teaching instrumentr
Professional Standard - Military and Civilian Products, Differential calorimeter method
- WJ 2290-1995 Verification Regulations for Differential Scanning Calorimeter
- WJ/T 9054-2006 Test method for thermal stability of industrial explosives: differential scanning calorimetry
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Differential calorimeter method
- GB/T 6297-2002 Standard test method for differential thermal analysis of row materials of ceramic
- GB/T 17594-1998 Textile material--Test method for themotransition temperature--Differential scanning calorimetry (DSC)
- GB/T 6689-1986 Determination of colour difference of dyes(Instrumental method)
- GB/T 7287.8-1987 Measuring method for power deviation rate of infrared heater
- GB/T 13939-1992 Rubber,vulcanized.Test method of heat and oxygen.Tube tester ageing method
- GB/T 13939-2014 Rubber, vulcanized.Test method of deterioration by heat and oxygen.Tube tester
- GB 6579-1986 Laboratory glassware－Methods for thermal shock test
- GB/T 6579-1986 Laboratory glassware--Methods for thermal shock test
- GB/T 15814.3-1995 Reagent of fireworks and firecrackers--Thermal compatibility test--Method of DTA and DSC
- GB/T 15727-1995 Methods for thermal shock test of laboratory apparatus glass(stick method)
- GB/T 6579-2007 Laborator glassware.Thermal shock and thermal shock endurance test methods
- GB/T 27761-2011 Standard test method of mass loss and residue measurement validation of thermogravimetric analyzers
- GB/T 27762-2011 Standard test method for mass scale calibration of thermogravimetric analyzers
- GB/T 11606.7-1989 The method of environmental test for analytical instruments--Damp heat, cyclic
- GB/T 6688-2008 Dyestuffs.Determination of relative strength and color difference.Instrumental method
- GB/T 12085.2-1989 Optics and optical instruments--Environmental test methods--Cold, heat, humidity
- GB/T 19469-2004 Determination of ignition temperature of pyrotechnic composition-DTA-TG analysis
- GB/T 22232-2008 Test method for the thermal stability of chemicals by differential scanning calorimetry
- GB/T 7396-1987 Methods of measurement for television transposers
- GB/T 4893.7-1985 Furniture--Assessment of surface resistance to alternation of heat and cold
British Standards Institution (BSI), Differential calorimeter method
- BS EN 3475-414:2005 Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
- BS EN 3475-414:2006 Aerospace series. Cables, electrical, aircraft use. Test methods. Differential scanning calorimeter (DSC test)
- BS EN 13523-3:2014 Coil coated metals. Test methods. Colour difference. Instrumental comparison
- BS EN 13523-3:2001 Coil coated metals - Test methods - Colour difference - Instrumental comparison
- BS EN 13523-3:2021 Coil coated metals. Test methods. Colour difference and metamerism. Instrumental comparison
- BS ISO 24144:2023 Thermal insulation. Test methods for specific heat capacity of thermal insulation for buildings in the high temperature range. Differential scanning calorimetry (DSC) method
- BS 7307-1:1990 Building tolerances. Measurement of buildings and building products. Methods and instruments
- 22/30397807 DC BS ISO 24144. Thermal insulation. Test method for Specific heat capacity of thermal insulation for buildings in the high temperature range. DSC method
- BS ISO 23976:2021 Plastics. Fast differential scanning calorimetry (FSC). Chip calorimetry
- 15/30322265 DC BS EN 3475-414. Aerospace series. Cables, electrical, aircraft use. Test methods. Part 414. Differential scanning calorimeter (DSC test)
- BS EN 993-19:2004 Methods of test for dense shaped refractory products - Determination of thermal expansion by a differential method
- 20/30396016 DC BS ISO 23976. Plastics. Fast differential scanning calorimetry. Chip calorimetry
- 20/30425659 DC BS EN 13523-3. Coil coated metals. Test methods. Part 3. Colour difference. Instrumental comparison
- BS EN ISO 11357-4:2013 Plastics - Differential scanning calorimetry (DSC) - Determination of specific heat capacity
- BS EN ISO 11357-4:2014 Plastics. Differential scanning calorimetry (DSC). Determination of specific heat capacity
- BS EN ISO 11357-4:2021 Plastics. Differential scanning calorimetry (DSC). Determination of specific heat capacity
- BS 6923:1988 Method for calculation of small colour differences
- BS ISO 9022-2:2002 Optics and optical instruments - Environmental test methods - Cold, heat and humidity
- BS ISO 14934-2:2013 Fire tests. Calibration and use of heat flux meters. Primary calibration methods
- PD IEC/TR 62036:2007 Mineral insulating oils. Oxidation stability test method based on differential scanning calorimetry (DSC)
- BS EN ISO 11357-1:2016 Plastics. Differential scanning calorimetry (DSC). General principles
- BS EN ISO 11357-1:1997 Plastics - Differential scanning calorimetry (DSC) - General principles
- BS EN ISO 11357-1:2009 Plastics - Differential scanning calorimetry (DSC) - General principles
- BS ISO 9022-18:1995 Optics and optical instruments. Environmental test methods. Combined damp heat and low internal pressure
- BS EN ISO 11357-8:2021 Plastics. Differential scanning calorimetry (DSC). Determination of thermal conductivity
- BS EN ISO 8655-6:2002 Piston-operated volumetric apparatus - Part 6:Gravimetric methods for the determination of measurement error
- PD IEC/TR 61946:2007 Mineral insulating oils. Characterization of paraffinic /naphthenic nature. Low temperature differential scanning calorimetry (DSC) test method
Group Standards of the People's Republic of China, Differential calorimeter method
- T/CIE 082-2020 Method for detecting temperature difference of thermal insulation coating
- T/SDZDH 002-2020 Mask ventilation resistance and pressure difference detector Calibration method
- T/CIESC 0002-2020 Standard Practice for Evaluation of Methods for Determination of Kinetic Parameters by Calorimetry and Differential Scanning Calorimetry
National Metrological Technical Specifications of the People's Republic of China, Differential calorimeter method
- JJF(航空) 040-1988 Calibration method of thermoelectric comparator
- JJF 1447-2014 Calibration Specification for Ultrasonic Flaw Detectors by Time-of-Flight Diffraction
American National Standards Institute （ANSI), Differential calorimeter method
- ANSI/ASTM D4591:2001 Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
- ANSI/ASTM D3850:2012 Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials by Thermogravimetric Method (TGA)
- ANSI/ASTM D3795:2000 Test Method for Thermal Flow and Cure Properties of Thermosetting Plastics by Torque Rheometer (15.04)
- ANSI/ASTM D6375:2009 Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) (Noack Method)
Military Standard of the People's Republic of China-General Armament Department, Differential calorimeter method
- GJB 772.202-1989 Explosives test methods Explosives compatibility test Differential thermal analysis and differential scanning calorimetry
- GJB 737.14-1995 Test Methods for Pyrotechnic Agents Compatibility Test Differential Thermal Analysis and Differential Scanning Calorimetry
- GJB 8683.11-2015 Test methods for physical parameters of pyrotechnics Part 11: Determination of spontaneous ignition temperature Differential thermal analysis and differential scanning calorimetry
- GJB 595.5-1988 Environmental test methods for artillery optical instruments - damp heat test
- GJB 8683.10-2015 Test methods for physical parameters of pyrotechnics Part 10: Determination of thermal conductivity by differential scanning calorimetry
- GJB 383.19A-1997 Telemetry system and sub-system testing methods Tape recorder tape speed changes and timing error testing methods
- GJB 8683.8-2015 Test methods for physical parameters of pyrotechnics Part 8: Continuous specific heat capacity determination Differential scanning calorimetry
- GJB 5323-2004 Indoor test method for the shielding/interference performance of smoke screens on thermal imaging cameras
- GJB 570.13-1988 Meteorological instrument final test method cloud meter
- GJB 570.14-1988 Typical test methods for meteorological instruments Radiosonde
- GJB 1797-1993 Test method for pressure difference strength of aircraft electrically heated glass under temperature difference
Professional Standard - Petrochemical Industry, Differential calorimeter method
- SH/T 1833-2022 Determination of color difference for raw synthetic rubber – Colorimeter method
- SH/T 0589-1994 Determination of petroleum wax transition temperature (differential scanning calorimetry)
- NB/SH/T 0832-2010 Determination of hot surface oxidation of lubricating oils by pressure differential scanning calorimetry
RU-GOST R, Differential calorimeter method
- GOST 13424-1968 Teodolites. Methods for determination of errors of horizontal circle diameter
- GOST R EN 824-2008 Thermal insulating products for building applications. Methods for measurement of deviation from squareness
- GOST EN 824-2011 Thermal insulating products for building applications. Method for determination of deviation from squareness
- GOST R EN 825-2008 Thermal insulating products for building applications. Methods for measurement of deviation from flatness
- GOST EN 825-2011 Thermal insulating products for building applications. Methods for determination urement of deviation from flatness
- GOST 8.459-1982 State system for ensuring the uniformity of measurements. Pitch diference measuring instruments. Methods and means of verification
- GOST R 54019-2010 Fire hazard testing. Part 2-20. Glowing/hot-wire based test methods. Hot-wire coil ignitability. Apparatus, test method and guidance
- GOST R 54019-2010(2019) Fire hazard testing. Part 2-20. Glowing/hot-wire based test methods. Hot-wire coil ignitability. Apparatus, test method and guidance
- GOST R 51028-1997 Error control equipment for DCE. Methods of error correcting
- GOST 24314-1980 Electronic measuring instruments. Terms and definitions, methods of expressing errors and general test conditions
- GOST R 56754-2015 Plastics. Differential scanning calorimetry (DSC). Part 4. Determination of specific heat capacity
- GOST R 57952-2017 Fluoropolymers. Determining temperatures and heat of transition by differential scanning calorimetry
- GOST 8.381-1980 State system for ensuring the uniformity of measurements. Standards. The ways of expressing the errors
Association Francaise de Normalisation, Differential calorimeter method
- NF EN ISO 24157:2008 Optique et instruments ophtalmiques - Méthodes de présentation des aberrations de l'oeil humain
- NF T37-001-3:2014 Coil coated metals - Test methods - Part 3 : colour difference - Instrumental comparison
- NF L17-451:1988 Aéronautique et espace - Préimprégnés de résine thermodurcissable - Analyse thermique différentielle - Méthode d'essai.
- NF EN ISO 24157/A1:2020 Optique et instruments ophtalmiques - Méthodes de présentation des aberrations de l'oeil humain - Amendement 1
- NF X35-202:1994 Thermal environments. Instruments and methods for measuring physical quantities.
- NF T37-001-3*NF EN 13523-3:2021 Coil coated metals - Test methods - Part 3 : colour difference and metamerism - Instrumental comparison
- NF EN 13523-3:2021 Tôles prélaquées - Méthodes d'essai - Partie 3 : différence de couleur et métamérisme - Comparaison au moyen d'instruments
- NF B40-300-19*NF EN 993-19:2004 Methods of test for dense shaped refractory products - Part 19 : determination of thermal expansion by a differential method
- NF T46-050:2013 Rubber - Differential scanning calorimetry (DSC) - General principles
- NF T46-050:2015 Rubber - Differential scanning calorimetry (DSC) - General principles
- NF EN IEC 60695-2-10:2021 Essais relatifs aux risques du feu - Partie 2-10 : essais au fil incandescent/chauffant - Appareillage et méthode commune d'essai
- NF T51-507-4:2013 Plastics - Differential scanning calorimetry (DSC) - Part 4: determination of specific heat capacity
- NF T51-507-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4 : determination of specific heat capacity
- NF T51-507-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8 : determination of thermal conductivity
- NF T51-507-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4 : determination of specific heat capacity
- NF T51-403*NF EN ISO 11409:1998 Plastics. Phenolic resins. Determination of heats and temperatures of reaction by differential scanning calorimetry.
- NF EN ISO 11357-8:2021 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 8 : détermination de la conductivité thermique
North Atlantic Treaty Organization Standards Agency, Differential calorimeter method
- STANAG 4349-1995 MEASUREMENT OF THE MINIMUM RESOLVABLE TEMPERATURE DIFFERENCE (MRTD) OF THERMAL CAMERAS
- STANAG 4515-2002 EXPLOSIVES: THERMAL CHARACTERIZATION BY DIFFERENTIAL THERMAL ANALYSIS, DIFFERENTIAL SCANNING CALORIMETRY AND THERMOGRAVIMETRIC ANALYSIS
German Institute for Standardization, Differential calorimeter method
- DIN 51007-2:2021 Thermal analysis - Differential thermal analysis (DTA) and Differential scanning calorimetry (DSC) - Part 2: Fast differential scanning calorimetry (f-DSC); Chip calorimetry
- DIN 51007-2:2021-10 Thermal analysis - Differential thermal analysis (DTA) and Differential scanning calorimetry (DSC) - Part 2: Fast differential scanning calorimetry (f-DSC); Chip calorimetry
- DIN 51007:2019 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - General Principles
- DIN 51007:2019-04 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - General Principles
- DIN EN 13523-3:2001 Coil coated metals - Test methods - Part 3: Colour difference; Instrumental comparison; German version EN 13523-3:2001
- DIN EN 29885:1994 Wide-mouth glass containers; deviation from flatness of top sealing surface; test methods (ISO 9885:1991); German version EN 29885:1994
- DIN 51007-1:2023-07 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - Part 1: General principles / Note: Date of issue 2023-05-26*Intended as replacement for DIN 51007 (2019-04).
- DIN EN 13523-3:2020 Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison; German and English version prEN 13523-3:2020
- DIN EN 13523-3:2023-08 Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison; German and English version prEN 13523-3:2023 / Note: Date of issue 2023-07-14*Intended as replacement for DIN EN 13523-3 (2022-01).
- DIN EN 13523-3:2022-01 Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison; German version EN 13523-3:2021
- DIN EN 993-19:2004-08 Methods of test for dense shaped refractory products - Part 19: Determination of thermal expansion by a differential method; German version EN 993-19:2004
- DIN EN 993-19:2004 Methods of test for dense shaped refractory products - Part 19: Determination of thermal expansion by a differential method; German version EN 993-19:2004
- DIN EN 61074:1994-07 Methods of test for the determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry (IEC 61074:1991); German version EN 61074:1993
- DIN EN 13523-3:2014 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison; German version EN 13523-3:2014
- DIN 620-1:1982 Rolling bearings; Gauging methods for dimensional and running tolerances
- DIN ISO 9022-2:2003 Optics and optical instruments - Environmental test methods - Part 2: Cold, heat and humidity (ISO 9022-2:2002)
HU-MSZT, Differential calorimeter method
European Committee for Standardization (CEN), Differential calorimeter method
- EN 3475-414:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
- CEN EN 13523-3-2001 Coil Coated Metals - Test Methods - Part 3: Colour Difference - Instrumental Comparison
- EN 13523-3:2001 Coil Coated Metals - Test Methods - Part 3: Colour Difference - Instrumental Comparison
- EN 13523-3:2021 Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison
- EN 13523-3:2014 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
- EN ISO 5764:2009 Milk - Determination of freezing point - Thermistor cryoscope method (Reference method)
- EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
- EN 993-19:2004 Methods of test for dense shaped refractory products - Part 19: Determination of thermal expansion by a differintial method
- EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
Professional Standard - Water Conservancy, Differential calorimeter method
- SL 124-2014 Calibration methods for testing instrument of hydration heat of cement
- SL 124-1995 Method for calibration of cement hydration heat (direct method) tester
- SL 136-1995 Test method for adiabatic temperature rise tester
- SL 136-2017 Calibration method of concrete thermal parameter tester
- SL 114-2014 Code for calibration of oedometers
- SL 137-1995 Method for calibration of length measuring instrument
- SL 115-2014 Permeameter Calibration Method
- SL 112-1995 Calibration method of compaction instrument
- SL 112-2017 Calibration method of compaction instrument
Professional Standard - Aviation, Differential calorimeter method
- HBm 66.49-1990 Damp heat test method for instrumentation of minivans
- HBm 59-1987 Damp heat test method for miniature automobile instrument
- HB 6623.1-1992 Method for Determination of β Transition Temperature of Titanium Alloy Differential Thermal Analysis
- HB 7614-1998 Differential Scanning Calorimetry (DSC) Test Method for Degree of Curing of Composite Resin Matrix
水利部, Differential calorimeter method
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Differential calorimeter method
- GJB 5891.17-2006 Test method of loading material for initiating explosive device Part 17: Compatibility test Method of DTA and DSC
- GJB 5382.11-2005 Test methods of physical parameter for pyrotechnic. Part 11: Determination of Autoignition temperature. DTA and DSC method
- GJB 5382.10-2005 Test methods of physical parameter for pyrotechnic. Part 10: Determination of thermal conductivity. DSC method
- GJB 5383.11-2005 Test methods of sensitivity and stability for pyrotechnic. Part 11: Test for stability and com[atibility. DTA and DSC method
- GJB 5382.8-2005 Test methods of physical parameter for pyrotechnic. Part 8: Determination of specific heat capacity. DSC method
Canadian General Standards Board （CGSB), Differential calorimeter method
Danish Standards Foundation, Differential calorimeter method
- DS/EN 27726:1994 Thermal environments-Instruments and methods for measuring physical quantities
- DS/EN 3475-414:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
- DS/EN 13523-3:2001 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
- DS/EN 13523-3:2021 Coil coated metals – Test methods – Part 3: Colour difference and metamerism – Instrumental comparison
- DS/EN 993-19:2004 Methods of test for dense shaped refractory products - Part 19: Determination of thermal expansion by a differential method
- DS/EN ISO 11357-4:2013 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
- DS/ISO 11357-8:2021 Plastics – Differential scanning calorimetry (DSC) – Part 8: Determination of thermal conductivity
- DS/ISO 11357-4:2021 Plastics – Differential scanning calorimetry (DSC) – Part 4: Determination of specific heat capacity
CZ-CSN, Differential calorimeter method
Korean Agency for Technology and Standards (KATS), Differential calorimeter method
- KS F ISO 7976-1-2017(2022) Tolerances for building－Methods of measurement of buildings and building products－Part 1：Methods and instruments
- KS F ISO 7976-1:2002 Tolerances for building-Methods of measurement of buildings and building products-Part 1:Methods and instruments
- KS F ISO 7976-1:2017 Tolerances for building－Methods of measurement of buildings and building products－Part 1：Methods and instruments
- KS A 0063-2015 Method for specification of colour differences for opaque materials
- KS A 0063-2006 Method for specification of colour differences for opaque materials
- KS C 2132-1996(2016) Testing method for oxidative-induction time of polyolefins by differential scanning calorimetry
- KS C IEC 60695-2-10:2001 Fire hazard testing－Part 2－10：Glowing/hot-wire based test methods：Glow-wire apparatus and common test procedure
- KS C 2132-1996(2021) Testing method for oxidative-induction time of polyolefins by differential scanning calorimetry
- KS M 3004-2013 Testing method for flow properties of thermoplastics with a capillary rheometer
- KS M ISO 11357-4-2016(2021) Plastics－Differential scanning calorimetry(DSC)－Part 4：Determination of specific heat capacity
- KS D 0079-2010 Differential pressure testing method of titanium welded tubes
- KS M ISO 2782-1:2021 Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 1: Differential-pressure methods
- KS M ISO 2782-1:2014 Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 1: Differential-pressure methods
- KS B ISO 8655-6-2017(2022) Piston-operated volumetric apparatus－Part 6：Gravimetric methods for the determination of measurement error
- KS M ISO 11409:2006 Plastics－Phenolic resins－Determination of heats and temperatures of reaction by differential scanning calorimetry
- KS B ISO 9022-2:2003 Optics and optical instruments-Environmental test methods-Part 2:Cold, heat and humidity
- KS B ISO 9022-2:2013 Optics and optical instruments ― Environmental test methods ― Part 2: Cold, heat, humidity
Lithuanian Standards Office , Differential calorimeter method
- LST EN 3475-414-2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
- LST EN 13523-3-2002 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
- LST EN 993-19-2004 Methods of test for dense shaped refractory products - Part 19: Determination of thermal expansion by a differential method
Professional Standard - Electron, Differential calorimeter method
- SJ 2857.1-1988 Methods for measurement of thermoelectric refrigeration materials properties--Methods for measurement of thermal conductivity
- SJ 2857.3-1988 Methods for measurement of thermoelectric refrigeration materials properties--Methods for measurement of thermoelectric electromotance
- SJ 2858-1988 Method for measurement of thermoelectric refrigeration modules properties--Test method for temperature difference and maximum cold side temperature
国家市场监督管理总局、中国国家标准化管理委员会, Differential calorimeter method
- GB/T 40271-2021 Test method for identification of textile fibers—Differential scanning calorimetry（DSC）
- GB/T 37991-2019 Measuring method for ultra-thin glass reheating line shrinkage—Dilatometer method
- GB/T 37945-2019 Materials for organic light emitting diode display(OLED)—Test method of glass transfer temperature—Differential scanning calorimetry (DSC)
- GB/T 36965-2018 Test method for cross-linking degree of ethylene-vinyl acetate copolymer applied in photovoltaic modules—Differential scanning calorimetry（DSC）
International Organization for Standardization (ISO), Differential calorimeter method
- ISO 7976-1:1989 Tolerances for building; methods of measurement of buldings and building products; part 1: methods and instruments
- ISO 7726:1985 Thermal environments — Instruments and methods for measuring physical quantities
- ISO 24144:2023 Thermal insulation — Test methods for specific heat capacity of thermal insulation for buildings in the high temperature range — Differential scanning calorimetry (DSC) method
- ISO 23976:2021 Plastics - Fast differential scanning calorimetry (FSC) - Chip calorimetry
- ISO 3443-4:1986 Tolerances for building; Part 4 : Method for predicting deviations of assemblies and for allocation of tolerances
- ISO 11357-4:2005 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
- ISO 11357-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
- ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity
- ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
- ISO 9022-2:2002 Optics and optical instruments - Environmental test methods - Part 2: Cold, heat and humidity
KR-KS, Differential calorimeter method
- KS F ISO 7976-1-2017 Tolerances for building－Methods of measurement of buildings and building products－Part 1：Methods and instruments
- KS M ISO 11357-4-2016 Plastics－Differential scanning calorimetry(DSC)－Part 4：Determination of specific heat capacity
- KS M ISO 2782-1-2021 Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 1: Differential-pressure methods
Professional Standard - Textile, Differential calorimeter method
- FZ/T 50061-2023 Man-made fibers——Test method for thermal absorption and release performance of phase change materials——Differential scanning calorimetry(DSC)
AT-ON, Differential calorimeter method
- OENORM EN 13523-3-2021 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
- ONORM EN 27726-1994 Thermal environments. Instruments and methods for measuring physical quantities (ISO 7726:1985)
AENOR, Differential calorimeter method
- UNE-EN 13523-3:2014 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
- UNE-EN 993-19:2004 Methods of test for dense shaped refractory products - Part 19: Determination of thermal expansion by a differential method
- UNE 66051:1978 ESTIMATION OF THE DIFFERENCE OF TWO MEANS (VARIANCES UNKNOWN, BUT MAY BE ASSUMED EQUAL)
- UNE 32105:1995 SOLID MINERAL FUELS. DETERMINATION OF GROSS CALORIFIC VALUE BY THE CALORIMETER BOMB METHOD.
YU-JUS, Differential calorimeter method
RO-ASRO, Differential calorimeter method
TR-TSE, Differential calorimeter method
- TS 784-1969 METHODS FOR THERMAL SHOCK TESTS ON LABORATORY GLASSWARE
European Association of Aerospace Industries, Differential calorimeter method
- AECMA PREN 3475-414-1999 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 414: Differential Scanning Calorimeter (DSC Test) Edition P 1
NATO - North Atlantic Treaty Organization, Differential calorimeter method
- STANAG 4515-2015 EXPLOSIVES. THERMAL ANALYSIS USING DIFFERENTIAL THERMAL ANALYSIS (DTA). DIFFERENTIAL SCANNING CALORIMETRY (DSC)@ HEAT FLOW CALORIMETRY (HFC)@ AND THERMOGRAVIMETRIC ANALYSIS (TGA) (ED 2)
SE-SIS, Differential calorimeter method
Professional Standard - Energy, Differential calorimeter method
- NB/SH/T 0632-2014 Standard test method for determining specific heat capacity by differential scanning calorimetry
中国石油天然气总公司, Differential calorimeter method
- SY/T 6015-1994 Oil and gas display analyzer rock pyrolysis analysis method
GM North America, Differential calorimeter method
- GM GM9094P-1988 Method for Determining Melting Point of Semicrystalline Polymers by Differential Scanning Calorimetry
BE-NBN, Differential calorimeter method
- NBN-ISO 7976-1:1992 Tolerances for building - Methods of measurement of buildings and building products - Part 1 : Methods and instruments
- NBN-ISO 3443-4:1992 Tolerances for building - Part 4 : Method (or predicting deviations of assemblies and for allocation of tolerances
- NBN-EN 27726-1994 Thermal environments. Instruments and methods for measuring physical quantities (ISO 7726:1985)
- NBN C 72-360-1981
PT-IPQ, Differential calorimeter method
- NP EN 13523-3-2002 Coil coated metals Test methods Part 3:Colour difference-Instrumental comparison
Shandong Provincial Standard of the People's Republic of China, Differential calorimeter method
- DB37/T 339-2003 Method for Determination of Purity of Phthalic Anhydride - Differential Scanning Calorimetry (DSC)
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Differential calorimeter method
- PREN 3475-414-1999 Aerospace Series Cables@ Electrical@ Aircraft Use Test Methods Part 414: Differential Scanning Calorimeter (DSC Test) (Edition P 1)
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Differential calorimeter method
- ASHRAE 4833-2006 Impacts of Manufacturing Tolerances of the Effectiveness-Ntu Method for Regenerative Exchanger Design
ZA-SANS, Differential calorimeter method
- SANS 5764:2005 Milk - Determination of freezing point - Thermistor cryoscope method (Reference method)
未注明发布机构, Differential calorimeter method
- BS ISO 18373-2:2008(2011) Rigid PVC pipes — Differential scanning calorimetry (DSC) method — Part 2 : Measurement of the enthalpy of fusion of crystallites
- BS EN 993-19:2004(2007) Methods of test for dense shaped refractory products — Part 19 : Determination of thermal expansion by a differential method
- BS 6923:1988(2011) Method for Calculation of small colour differences
- BS ISO 18373-1:2007(2012) Rigid PVC pipes — Differential scanning calorimetry (DSC) method — Part 1 : Measurement of the processing temperature
- BS EN ISO 11409:1998(1999) Plastics — Phenolic resins — Determination of heats and temperatures of reaction by differential scanning calorimetry
IT-UNI, Differential calorimeter method
International Electrotechnical Commission (IEC), Differential calorimeter method
- IEC TS 60695-2-20:2021 Fire hazard testing - Part 2-20: Glowing/hot-wire based test methods - Hot wire ignition coil test method - Apparatus, verification, test method and guidance
Professional Standard - Commodity Inspection, Differential calorimeter method
- SN/T 2240-2008 Accelerated storage test,thermal analysis methods for dangerous goods.Differential thermal analysis(DTA)and thermo gravimetric analysis(TGA)
- SN/T 2942-2011 Assessment of thermal oxidation stability of plastics.Differential scanning calorimetry
Professional Standard - Ocean, Differential calorimeter method
- HY 21.3-1992 The basic method of environmental test for oceanographic instruments - Guideline for damp/heat test
GOSTR, Differential calorimeter method
- GOST 34233.7-2017 Vessels and apparatus. Norms and methods of strength calculation. Heat-exchangers
- GOST R 57920-2017 Plastics. Phenolic resins. Determination of heat and temperature of reaction by differential scanning calorimetry
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Differential calorimeter method
- GB/T 34749-2017 Fire-resistance tests for wood and wood composite material—Cone calorimeter method
- GB/T 32065.7-2015 Environmental test methods for oceanographic instruments—Part 7：Damp heat, cyclic
- GB/T 32065.6-2015 Environmental test methods for oceanographic instruments—Part 6：Damp heat, steady state
- GB/T 19466.4-2016 Plastics—Differential scanning calorimetry （DSC）—Part 4: Determination of specific heat capacity
- GB/T 35934-2018 Cotton—Test method for differential dyeing behavior
ES-UNE, Differential calorimeter method
- UNE-EN 13523-3:2022 Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison
- UNE-EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
- UNE-EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
CU-NC, Differential calorimeter method
- NC 02-06-1968 Representation of linear and angular desviations
- NC 90-00-17-1987 Metrological Assurance. Methods for Expressinq Measurement Errors and Ways for Representing the Results
Professional Standard - Public Safety Standards, Differential calorimeter method
- GA/T 2080-2023 Forensic sciences—Examination methods for plastics—Differential scanning calorimetry(DSC)
- GA/T 1994-2022 Forensic Science Synthetic Fiber Examination Differential Scanning Calorimetry
- GA/T 2077-2023 Forensic sciences—Examination methods for projectiles and soldering tin—Differential scanning calorimetry(DSC)
Japanese Industrial Standards Committee (JISC), Differential calorimeter method
- JIS H 7802:2005 Testing method of ultrafine metal particles for ignition temperature by differential thermal analysis
- JIS R 1650-1:2002 Testing method for fine ceramics thermoelectric materials Part 1: Thermoelectric power
- JIS A 1316:2022 Test method using cone calorimeter measuring heat release rate and smoke production rate for building materials
- JIS B 0021:1984 Indications of geometrical tolerances on drawings
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Differential calorimeter method
- ASHRAE 4476-2001 Determination of the Divergence of Calculation Methods for Heat Gain Through Walls (International Journal of HVAC&R Research)
- ASHRAE 41.9-2000 Calorimeter Test Methods for Mass Flow Measurements of Volatile Refrigerants
- ASHRAE 41.9-2011 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
- ASHRAE 41.9 ERTA-2017 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
工业和信息化部, Differential calorimeter method
- YS/T 1256-2018 Differential scanning calorimetry for specific heat capacity test of non-ferrous metal materials
Taiwan Provincial Standard of the People's Republic of China, Differential calorimeter method
- CNS 14705-2007 Method of test for heat release rate for building materials - Cone calorimeter method
- CNS 14705-2002 Method of test for heat release rate for building materials
- CNS 5475-1980 Method of Test for Resistance to Heat and to Sudden Change in Trmpreature for Porcelain Laboratory Appartus
Standard Association of Australia （SAA）, Differential calorimeter method
- AS/NZS 3580.12.1:2001 Methods for sampling and analysis of ambient air - Determination of light scattering - Integrating nephelometer method
IN-BIS, Differential calorimeter method
International Commission on Illumination (CIE), Differential calorimeter method
- CIE 199-2011 METHODS FOR EVALUATING COLOUR DIFFERENCES IN IMAGES
- CIE 217-2016 Recommended Method for Evaluating the Performance of Colour-Difference Formulae
CEN - European Committee for Standardization, Differential calorimeter method
- EN ISO 11357-4:2013 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
Professional Standard - Petroleum, Differential calorimeter method
- SY/T 0545-2012 Determination of thermal property parameters of the wax precipitation in crude oil.Test method by differential scanning calorimetry
- SY 0545-2012 Determination of Thermal Characteristic Parameters of Wax Precipitation in Crude Oil Differential Scanning Calorimetry
- SY/T 0545-1995 Determination of Thermal Characteristic Parameters of Wax Precipitation in Crude Oil Differential Scanning Calorimetry
- SY/T 6588-2006 Calibration methods for electric log tools
- SY/T 6588-2012 Calibration methods for electric log tools
- SY 6588-2012 Calibration method of electrical logging tool
- SY/T 6740-2008 The calibration method of caliper
- SY/T 6813-2010 The calibration method of the down hole temperature logging tool
- SY 6740-2008 Caliper Calibration Methods
- SY 6813-2010 Calibration method of well temperature instrument
National Metrological Verification Regulations of the People's Republic of China, Differential calorimeter method
- JJG 463-1996 Verification Regulation of Melting-Point-Measuring Instruments With Thermo-Micro-Method
Professional Standard - Electricity, Differential calorimeter method
- DL/T 2170-2020 Calculation Method of Consumption Difference of Coal-fired Units
Hubei Provincial Standard of the People's Republic of China, Differential calorimeter method
Professional Standard - Coal, Differential calorimeter method
- MT/T 154.10-1996 Modeling method and management method of safety instruments and meters used in coal mines