ZH
RU
ES

How to use the differential heat meter

How to use the differential heat meter, Total:499 items.

In the international standard classification, How to use the differential heat meter involves: Thermodynamics and temperature measurements, Measurement of volume, mass, density, viscosity, Surface treatment and coating, Protection against fire, Aerospace electric equipment and systems, Protection of and in buildings, Plastics, Measurement of fluid flow, Environmental testing, Construction industry, Analytical chemistry, Construction materials, Physics. Chemistry, Rubber, Fruits. Vegetables, Installations in buildings, Semiconductor devices, Test conditions and procedures in general, Coals, Fuels, Fluid storage devices, Nuclear energy engineering, Linear and angular measurements, Fibre optic communications, Solar energy engineering, Optics and optical measurements, Energy and heat transfer engineering in general, Clothes, Footwear, Road engineering, Products of the textile industry, Milk and milk products, Products of the chemical industry, Piezoelectric and dielectric devices, Testing of metals, Insulating fluids, Waxes, bituminous materials and other petroleum products, Glass, Medical equipment, Mechanical testing, Domestic, commercial and industrial heating appliances, Adhesives, Burners. Boilers, Soil quality. Pedology, Protective equipment, Corrosion of metals, Electrical and electronic testing, Insulating materials, Lubricants, industrial oils and related products, Elements of buildings, Paper products, Metalliferous minerals, Refractories, Equipment for entertainment, Sensory analysis, Interface and interconnection equipment, Organic chemicals, Electronic tubes, Paints and varnishes, Tobacco, tobacco products and related equipment, Railway rolling stock, Paper and board, Non-textile floor coverings, Equipment for the metallurgical industry, Geology. Meteorology. Hydrology, Environmental protection, Air quality, Agricultural machines, implements and equipment, Textile fibres, Vocabularies, Radiation measurements.

American Society for Testing and Materials (ASTM), How to use the differential heat meter

ASTM E967-18 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E967-08(2014) Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E1311-89(2004) Standard Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems
ASTM E1269-05 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E126-92(1998) Standard Test Method for Inspection and Verification of Hydrometers
ASTM E1269-01 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E1269-99 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E1269-04 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E2041-01 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM E2041-08e1 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM E2041-03 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM E2041-99 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM E2070-13(2018) Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
ASTM C518-15 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM E2069-06(2018) Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM E2069-19 Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM E2041-13e1 Standard Test Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM D3464-96(2014) Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM E2041-13(2018) Standard Test Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM E1356-98 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry or Differential Thermal Analysis
ASTM E2602-09(2015) Standard Test Methods for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
ASTM E3040-15 Standard Test Method for Evaluation of Instrumental Color Difference with a Gray Scale
ASTM E2890-12 Standard Test Method for Kinetic Parameters for Thermally Unstable Materials by Differential Scanning Calorimetry Using the Kissinger Method
ASTM E698-16 Standard Test Method for Kinetic Parameters for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method
ASTM E2890-12e1 Standard Test Method for Kinetic Parameters for Thermally Unstable Materials by Differential Scanning Calorimetry Using the Kissinger Method
ASTM E1269-11 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E2253-08 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM E2253-21 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM E3367-23 Standard Test Method for Determining the Combustion Behavior of Layered Assemblies using a Cone Calorimeter
ASTM E537-98 Standard Test Method for Assessing the Thermal Stability of Chemicals By Methods of Thermal Analysis
ASTM E1269-11(2018) Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM C1784-20 Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products
ASTM E2716-23 Standard Test Method for Determining Specific Heat Capacity by Modulated Temperature Differential Scanning Calorimetry
ASTM E2160-04(2018) Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
ASTM E2160-23 Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
ASTM E537-02 Standard Test Method for The Thermal Stability Of Chemicals By Differential Scanning Calorimetry
ASTM E2160-01 Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
ASTM E2160-04 Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
ASTM E2160-04(2012) Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
ASTM D2244-05 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM E928-03 Standard Test Method for Determination of Purity by Differential Scanning Calorimetry
ASTM E928-08(2014) Standard Test Method for Purity by Differential Scanning Calorimetry
ASTM E793-06 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM E537-20 Standard Test Method for Thermal Stability of Chemicals by Differential Scanning Calorimetry
ASTM E2716-09 Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry
ASTM E1354-09 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1354-02 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1354-99 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1354-23 Red Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter (Standard + Redline PDF Bundle)
ASTM E1354-08 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1354-08a Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1354-10 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1354-02d Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1354-17 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1354-15 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E2923-14(2019) Standard Practice for Longevity Assessment of Firestop Materials Using Differential Scanning Calorimetry
ASTM E1347-06(2015) Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM E2070-23 Standard Test Methods for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
ASTM E537-07 Standard Test Method for The Thermal Stability Of Chemicals By Differential Scanning Calorimetry
ASTM E537-12 Standard Test Method for The Thermal Stability of Chemicals by Differential Scanning Calorimetry
ASTM F78-97(2002) Standard Test Method for Calibration of Helium Leak Detectors by Use of Secondary Standards
ASTM E177-14 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM C518-17 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM E2923-13 Standard Practice for Longevity Assessment of Firestop Materials Using Differential Scanning Calorimetry
ASTM E2923-14 Standard Practice for Longevity Assessment of Firestop Materials Using Differential Scanning Calorimetry
ASTM E1952-17 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM E1952-11 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM D696-16 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between &x2212;30&xb0;C and 30&xb0;C with a Vitreous Silica Dilatometer
ASTM E2716-09(2014) Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry
ASTM D2244-14 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM E422-05(2016) Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter
ASTM E422-05(2011) Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter
ASTM E2551-07 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM E2551-13 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM E457-08(2020) Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM E2890-12(2018) Standard Test Method for Kinetic Parameters for Thermally Unstable Materials by Differential Scanning Calorimetry Using the Kissinger Method
ASTM E177-90a(1996) Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E177-04 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E177-06 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E177-04e1 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E177-19 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E177-20 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM D2885-95(1999) Standard Test Method for Research and Motor Method Octane Ratings Using On-Line Analyzers
ASTM D2885-21 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D6587-12 Standard Test Method for Yarn Number Using Automatic Tester
ASTM D6587-12(2018) Standard Test Method for Yarn Number Using Automatic Tester
ASTM D2885-08 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D2885-09 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D4591-97 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
ASTM D4591-01 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
ASTM D4591-07 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
ASTM D4591-07(2012) Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
ASTM D4591-17 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
ASTM E793-06(2012) Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM E1213-97 Standard Test Method for Minimum Resolvable Temperature Difference for Thermal Imaging Systems
ASTM E1213-97(2002) Standard Test Method for Minimum Resolvable Temperature Difference for Thermal Imaging Systems
ASTM E1356-03 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
ASTM E793-01 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM E793-95 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM E793-06(2018) Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM E1356-08 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
ASTM E459-05(2011) Standard Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter
ASTM C714-05(2015) Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
ASTM E1474-20 Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
ASTM E1474-20a Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
ASTM E1474-04e1 Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
ASTM E2070-03 Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
ASTM E2070-00 Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
ASTM D4591-22 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
ASTM E177-10 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E1641-13 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM D5099-93(2003) Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry
ASTM D5099-93(1998) Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry
ASTM F1678-96 Standard Test Method for Using a Portable Articulated Strut Slip Tester (PAST)
ASTM E2069-06 Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM E2069-06(2012) Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM F2469-15 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
ASTM D3418-03 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D4419-90(2010) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
ASTM D3418-08 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM E1356-08(2014) Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
ASTM E1356-23 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
ASTM F1291-04 Standard Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin
ASTM F1720-17 Standard Test Method for Measuring Thermal Insulation of Sleeping Bags Using a Heated Manikin
ASTM F1291-16 Standard Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin
ASTM C518-10 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM D1518-14 Standard Test Method for Thermal Resistance of Batting Systems Using a Hot Plate
ASTM D1518-11a Standard Test Method for Thermal Resistance of Batting Systems Using a Hot Plate
ASTM E2070-13 Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
ASTM E2041-23 Standard Test Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
ASTM E177-13 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM D5225-14 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
ASTM D6230-98(2005) Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
ASTM F2961-14 Standard Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter
ASTM G73-10 Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus
ASTM E1213-97(2009) Standard Test Method for Minimum Resolvable Temperature Difference for Thermal Imaging Systems
ASTM E698-23 Standard Test Method for Kinetic Parameters for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method
ASTM E1858-03 Standard Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
ASTM E928-01 Standard Test Method for Determination of Purity by Differential Scanning Calorimetry
ASTM E928-96 Standard Test Method for Determination of Purity by Differential Scanning Calorimetry
ASTM E928-08 Standard Test Method for Determination of Purity by Differential Scanning Calorimetry
ASTM E2009-23 Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
ASTM E2009-08(2014)e1 Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
ASTM E1858-08 Standard Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
ASTM C1702-09 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM E2008-99 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM E906/E906M-17 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method
ASTM E698-18 Standard Test Method for Kinetic Parameters for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method
ASTM F2469-20 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
ASTM D572-04(2015) Standard Test Method for Rubber&x2014;Deterioration by Heat and Oxygen
ASTM C1871-22 Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
ASTM C1784-14 Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products
ASTM C1667-15 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Transmission Properties of Vacuum Insulation Panels
ASTM C1667-09 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels
ASTM F1320-01(2006) Standard Test Method for Evaluating Thermal Paper Employing a Facsimile Thermal Printer as a Test Instrument
ASTM D5591-22 Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
ASTM C1667-07 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels
ASTM E2253-11 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM E408-13(2019) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM E2583-07(2015) Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)
ASTM D6951/D6951M-09(2015) Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
ASTM D6951-03 Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
ASTM D6951/D6951M-09 Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
ASTM D5099-08 Standard Test Methods for Rubberx2014;Measurement of Processing Properties Using Capillary Rheometry
ASTM D3895-04 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
ASTM D3895-06 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
ASTM D3895-02 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
ASTM D3895-03 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
ASTM E1858-08(2015)e1 Standard Test Methods for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
ASTM D3895-14 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
ASTM F1720-96(2004) Standard Test Method for Measuring Thermal Insulation of Sleeping Bags Using a Heated Manikin
ASTM D3464-96(2001) Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM D3464-96(2023) Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM E2890-21 Standard Test Method for Determination of Kinetic Parameters and Reaction Order for Thermally Unstable Materials by Differential Scanning Calorimetry Using the Kissinger and Farjas Methods
ASTM E1641-04 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM D7750-12 Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
ASTM D8184-18 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
ASTM D8184-18e1 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
ASTM C1871-18a Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
ASTM C1871-18 Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
ASTM C177-13 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
ASTM D3895-07 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
ASTM E1858-97 Standard Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calirometry
ASTM E1858-00 Standard Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
ASTM E2009-02 Standard Test Method for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
ASTM D4974-02 Standard Test Method for Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
ASTM F1291-15 Standard Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin
ASTM D7404-07 Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM D7404-07(2012) Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM E2058-13a Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM D7404-07(2016) Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM D5099-08(2017) Standard Test Methods for Rubber&x2014;Measurement of Processing Properties Using Capillary Rheometry
ASTM F3418-20 Standard Test Method for Measurement of Transition Temperatures of Slack Waxes used in Equine Sports Surfaces by Differential Scanning Calorimetry (DSC)
ASTM D6375-99a Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM D6375-05 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM D6375-09(2019) Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM D6375-09(2014) Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer 40;TGA41; Noack Method
ASTM E2347-05 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
ASTM E2347-04 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
ASTM E2268-04 Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference
ASTM E2268-04(2011) Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference
ASTM E1641-18 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM E2009-08 Standard Test Method for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
ASTM E2009-99 Standard Test Method for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
ASTM E2602-22 Standard Test Methods for Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
ASTM E1858-23 Standard Test Methods for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
ASTM E2602-09 Standard Test Method for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
ASTM D5483-21 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
ASTM D6186-08(2013) Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
ASTM D528-97(2007) Standard Test Method for Machine Direction of Paper and Paperboard
ASTM D5289-95(2001) Standard Test Method for Rubber Property8212;Vulcanization Using Rotorless Cure Meters
ASTM D7428-08e1 Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
ASTM D6928-08 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
ASTM D5289-19 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D4541-09 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D5289-95 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM E303-93(2018) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM F1930-18 Standard Test Method for Evaluation of Flame-Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
ASTM D7271-06(2020) Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
ASTM D5289-19a Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM F2894-12a Standard Test Method for Evaluation of Materials, Protective Clothing and Equipment for Heat Resistance Using a Hot Air Circulating Oven
ASTM F2894-12b Standard Test Method for Evaluation of Materials, Protective Clothing and Equipment for Heat Resistance Using a Hot Air Circulating Oven
ASTM C1702-15a Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
ASTM E648-14a Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
ASTM C177-10 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
ASTM C461-81(1997)e1 Standard Test Methods for Mastics and Coatings Used With Thermal Insulation
ASTM E1545-11 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
ASTM D454-04(2015) Standard Test Method for Rubber Deterioration by Heat and Air Pressure
ASTM E162-15a Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM D5485-16 Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter
ASTM D5483-02e1 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
ASTM D5483-95 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
ASTM D6186-98 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
ASTM D6186-98(2003)e1 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
ASTM D5483-05(2015) Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
ASTM D5483-05(2010) Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
ASTM D6186-08 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
ASTM E1486-98(2004) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
ASTM E1486-98(2010) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
ASTM D5142-02a Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-02ae1 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-02 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5591-98a Standard Test Method for Thermal Shrinkage Force of Yarn and Cord Using the Testrite Thermal Shrinkage Force Tester
ASTM D5591-02 Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
ASTM F1291-10 Standard Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin
ASTM E1225-20 Standard Test Method for Thermal Conductivity of Solids Using the Guarded-Comparative-Longitudinal Heat Flow Technique
ASTM E511-07(2020) Standard Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Transducer
ASTM F1868-17 Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate
ASTM D5591-04(2016) Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
ASTM D5591-04(2011) Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
ASTM D3999-91(1996) Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus
ASTM E303-93(1998) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM F1677-96 Standard Test Method for Using a Portable Inclineable Articulated Strut Slip Tester (PIAST)
ASTM D5093-90(1997) Standard Test Method for Field Measurement of Infiltration Rate Using a Double-Ring Infiltrometer with a Sealed-Inner Ring
ASTM D5277-92(2002) Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
ASTM D1052-09(2019) Standard Test Method for Measuring Rubber Deterioration—Cut Growth Using Ross Flexing Apparatus
ASTM D5093-15e1 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
ASTM D2583-13 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D2583-13a Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D5093-15 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
ASTM D6756-09a Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
ASTM E698-11 Standard Test Method for Arrhenius Kinetic Constants for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method
ASTM E228-95 Standard Test Method for Linear Thermal Expansion of Solid Materials With a Vitreous Silica Dilatometer
ASTM E1824-18 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
ASTM E1824-19 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
ASTM E1545-00 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
ASTM E1545-05 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
ASTM E2683-09 Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
ASTM E1824-08 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis
ASTM D5142-04 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-09 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM F1320-92(1996) Standard Test Method for Evaluating Thermal Paper Employing a Facsimile Thermal Printer as a Test Instrument

PT-IPQ, How to use the differential heat meter

NP EN 13523-3-2002 Coil coated metals Test methods Part 3:Colour difference-Instrumental comparison

British Standards Institution (BSI), How to use the differential heat meter

BS ISO 14934-2:2013 Fire tests. Calibration and use of heat flux meters. Primary calibration methods
BS EN 3475-414:2005 Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
BS EN 3475-414:2006 Aerospace series. Cables, electrical, aircraft use. Test methods. Differential scanning calorimeter (DSC test)
15/30322265 DC BS EN 3475-414. Aerospace series. Cables, electrical, aircraft use. Test methods. Part 414. Differential scanning calorimeter (DSC test)
BS 7334-4:1992 Measuring instruments for building construction. Methods for determining accuracy in use of theodolites
BS EN ISO 4787:2011 Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use
BS 7334-3:1990 Measuring instruments for building construction. Methods for determining accuracy in use: optical levelling instruments
BS 7334-5:1992 Measuring instruments for building construction. Methods for determining accuracy in use of optical plumbing instruments
BS 7334-6:1992 Measuring instruments for building construction - Methods for determining accuracy in use of laser instruments
BS 7334-8:1992 Measuring instruments for building construction. Methods for determining accuracy in use of electronic distance-measuring instruments up to 150 m
BS 7334-1:1990 Measuring instruments for building construction. Methods for determining accuracy in use: theory
BS 7190:1989 Method for assessing thermal performance of low temperature hot water boilers using a test rig
BS EN 60444-5:1997 Measurement of quartz crystal unit parameters. Methods for the determination of equivalent electrical parameters using automatic network analyzer techniques and error correction
BS ISO 9337-1:1999 Contact lenses. Determination of back vertex power. Method using focimeter with manual focusing
BS 7334-2:1990 Measuring instruments for building construction - Methods for determining accuracy in use: measuring tapes
BS EN ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
BS ISO 21283:2018 Iron ores. Determination of specific surface area. Test method using air-permeability apparatus (Blaine)
BS ISO/TR 12765:1998 Measurement of fluid flow in closed conduits. Methods using transit-time ultrasonic flowmeters
BS EN 13240:2001+A2:2004(2008) Roomheaters fired by solid fuel - Requirements and test methods
BS EN 13240:2001 Roomheaters fired by solid fuel - Requirements and test methods
BS EN 13240:2001+A2:2004 Roomheaters fired by solid fuel - Requirements and test methods
BS 6921:1988 Method for evaluation of the thermal endurance of flexible sheet electrical insulating materials using the wrapped tube method
BS EN 61290-10-4:2007 Optical amplifiers - Test methods - Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
BS ISO 17493:2016 Tracked Changes. Clothing and equipment for protection against heat. Test method for convective heat resistance using a hot air circulating oven
BS ISO 13506:2008 Protective clothing against heat and flame - Test method for complete garments - Prediction of burn injury using an instrumented manikin
BS EN ISO 22007-6:2015 Plastics. Determination of thermal conductivity and thermal diffusivity. Comparative method for low thermal conductivities using a temperature-modulation technique
BS 6538-2:1992 Air permeance of paper and board - Method for determination of air permeance using the Bendtsen apparatus

NATO - North Atlantic Treaty Organization, How to use the differential heat meter

STANAG 4515-2015 EXPLOSIVES. THERMAL ANALYSIS USING DIFFERENTIAL THERMAL ANALYSIS (DTA). DIFFERENTIAL SCANNING CALORIMETRY (DSC)@ HEAT FLOW CALORIMETRY (HFC)@ AND THERMOGRAVIMETRIC ANALYSIS (TGA) (ED 2)

Association Francaise de Normalisation, How to use the differential heat meter

NF EN 13523-3:2021 Tôles prélaquées - Méthodes d'essai - Partie 3 : différence de couleur et métamérisme - Comparaison au moyen d'instruments
NF X65-011-2*NF ISO 14934-2:2013 Fire tests - Calibration and use of heat flux meters - Part 2 : primary calibration methods
NF B35-309:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use.
NF T70-535:2004 Energetic materials for defense - Safety, vulnerability - Study of chemical compatibility by differential scanning calorimetry.
NF C93-805-5-3*NF EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification - Part 5-3 : test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser.
NF EN 60444-5:2001 Mesure des paramètres des résonateurs à quartz - Partie 5 : méthodes pour la détermination des paramètres électriques équivalents utilisant des analyseurs automatiques de réseaux et correction des erreurs
NF EN 61290-5-3:2002 Amplificateurs à fibres optiques - Spécification de base - Partie 5-3 : méthodes d'essai des paramètres de réflectance - Tolérance de réflectance en utilisant un analyseur de spectre électrique
NF S74-603*NF ISO 17493:2017 Clothing and equipment for protection against heat - Test method for convective heat resistance using a hot air circulating oven
NF EN ISO 13506-1:2017 Vêtements de protection contre la chaleur et les flammes - Partie 1 : Méthode d'essai pour vêtements complets - Mesurage de l'énergie transférée à l'aide d'un mannequin instrumenté
NF EN IEC 60695-2-10:2021 Essais relatifs aux risques du feu - Partie 2-10 : essais au fil incandescent/chauffant - Appareillage et méthode commune d'essai
NF B35-309*NF EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use
NF C93-625*NF EN 60444-5:2001 Measurement of quartz crystal unit parameters - Part 5 : methods for the determination of equivalent electrical parameters using automatic network analyzer techniques and error correction
NF C73-163-2-2*NF EN IEC 63159-2-2:2021 Household electric instantaneous water heaters - Methods for measuring the performance - Part 2-2 : efficiency of single point of use electric instantaneous water heaters
NF S74-572-1*NF EN ISO 13506-1:2017 Protective clothing against heat and flame - Part 1 : Test method for complete garments - Measurement of transferred energy using an instrumented manikin
NF C96-022-40*NF EN 60749-40:2012 Semiconductor devices - Mechanical and climatic test methods - Part 40 : board level drop test method using a strain gauge
NF EN 60749-40:2012 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 40 : méthode d'essai de chute au niveau de la carte avec utilisation d'une jauge de contrainte

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, How to use the differential heat meter

PREN 3475-414-1999 Aerospace Series Cables@ Electrical@ Aircraft Use Test Methods Part 414: Differential Scanning Calorimeter (DSC Test) (Edition P 1)

Japanese Industrial Standards Committee (JISC), How to use the differential heat meter

JIS A 1316:2022 Test method using cone calorimeter measuring heat release rate and smoke production rate for building materials
JIS S 2075:2011 Measurement method of efficiency for domestic gas and oil water heater under standard usage mode
JIS H 7802:2005 Testing method of ultrafine metal particles for ignition temperature by differential thermal analysis
JIS K 7148-1:2015 Plastics -- Epoxy resins -- Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
JIS R 2207-2:2007 Test methods for thermal expansion rate of refractory products -- Part 2: Contact method using cylinder test piece

American National Standards Institute （ANSI), How to use the differential heat meter

ANSI/ASTM D4591:2001 Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
ANSI/ASTM F1678:1997 Test Method for Using a Portable Articulated Strut Slip Tester (PAST)
ANSI/ASTM F1720:2014 Standard Test Method for Measuring Thermal Insulation of Sleeping Bags Using a Heated Manikin
ANSI/ASTM D6375:2009 Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) (Noack Method)
ANSI/ASTM F1720:2006 Test Method for Measuring the Thermal Insulation of Sleeping Bags Using a Heated Manikin
ANSI/ASHRAE 41.9-2011 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
ANSI/NFPA 271-2009 Standard Method of Test for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ANSI/ASTM E2058a:2013 Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)

IN-BIS, How to use the differential heat meter

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., How to use the differential heat meter

ASHRAE 41.9-2011 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
ASHRAE 41.9 ERTA-2017 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
ASHRAE AT-96-3-2-1996 Fault Detection in an Air-Handling Unit Using Residual and Recursive Parameter Identification Methods
ASHRAE 41.9-2018 Standard Methods for Refrigerant Mass Flow Measurements Using Calorimeters
ASHRAE 4054-1997 Deferred Heat Supply for Space Heating Using a Capacity-Limiting Device - A Beneficial Approach for District Heating
ASHRAE 203-2014 Method of Test for Determining Heat Gain of Office Equipment Used in Buildings
ASHRAE 203-2018 Method of Test for Determining Heat Gain of Office Equipment Used in Buildings

RU-GOST R, How to use the differential heat meter

GOST R EN 824-2008 Thermal insulating products for building applications. Methods for measurement of deviation from squareness
GOST EN 824-2011 Thermal insulating products for building applications. Method for determination of deviation from squareness
GOST R EN 825-2008 Thermal insulating products for building applications. Methods for measurement of deviation from flatness
GOST EN 825-2011 Thermal insulating products for building applications. Methods for determination urement of deviation from flatness
GOST EN 675-2014 Glass and glass products. Thermal properties determination methods. Thermal resistance determination by heat flow meter method
GOST 32255-2013 Milk and milk products. Instrumental express-method for determination of physic-chemical identification parameters by infrared analyzer
GOST 31851-2012 Industrial gas-using equipment. Air heaters. Test methods
GOST 21107.12-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for spark discharges
GOST R 54469-2011 Building materials and products of high and medium thermal resistance. Methods of determination of thermal resistance by means of guarded hot plate and heat flow meter
GOST 31634-2012 Cigarettes and filter rods. Determination of nominal diameter. Method using a laser beam measuring apparatus
PNST 190-2017 Freight cars. Method of dynamic tests for impact on track with the use of strain-gauge-based wheelset
GOST 21107.11-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for glow-discharge indicators

European Committee for Standardization (CEN), How to use the differential heat meter

EN 3475-414:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021)
EN ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
EN ISO 4787:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2010, Corrected version 2010-06-15)

German Institute for Standardization, How to use the differential heat meter

DIN 50933:1987 Measurement of coating thickness by differential measurement using a stylus instrument
DIN 51900-1:2000 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 1: Principles, apparatus, methods
DIN 12791-3:1983 Laboratory glassware; density hydrometers; use and test methods
DIN 10956:2007 Apparatus for sensory analysis - Universal testing glasses and lids - Requirements and instructions for use
DIN 10956:1975 Apparatus for sensory analysis; universal testing glasses and lids, requirements, instructions for use
DIN EN 13240:2005 Roomheaters fired by solid fuel - Requirements and test methods; German version EN 13240:2001 + A2:2004
DIN EN 61074:1994-07 Methods of test for the determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry (IEC 61074:1991); German version EN 61074:1993
DIN EN ISO 13506-1:2023-03 Protective clothing against heat and flame - Part 1: Test method for complete garments - Measurement of transferred energy using an instrumented manikin (ISO/DIS 13506-1:2023); German and English version prEN ISO 13506-1:2023 / Note: Date of issue 2023...
DIN EN 60444-5:1997-10 Measurement of quartz crystal unit parameters - Part 5: Methods for the determination of equivalent electrical parameters using automatic network analyser techniques and error correction (IEC 60444-5:1995); German version EN 60444-5:1997
DIN EN 61290-10-2:2008-07 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (IEC 61290-10-2:2007); German version EN 61290-10-2:2008 / Note: DIN EN 61290-10-2 (2004-02) remains valid alongside this stan...
DIN EN 60749-40:2012-02 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge (IEC 60749-40:2011); German version EN 60749-40:2011
DIN ISO 2971:2004 Cigarettes and filter rods - Determination of nominal diameter - Method using a laser beam measuring apparatus (ISO 2971:1998)
DIN IEC 61336:1999 Nuclear instrumentation - Thickness measurement systems utilizing ionizing radiation - Definitions and test methods (IEC 61336:1996)

Danish Standards Foundation, How to use the differential heat meter

DS/EN 3475-414:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
DS/EN ISO 4787:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
DS/EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification - Part 5-3: Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser
DS/ISO 17493:2002 Clothing and equipment for protection against heat - Test method for convective heat resistance using a hot air circulating oven
DS/EN 60444-5:1998 Measurement of quartz crystal unit parameters - Part 5: Methods for the determination of equivalent electrical parameters using automatic network analyzer techniques and error correction
DS/EN 993-19:2004 Methods of test for dense shaped refractory products - Part 19: Determination of thermal expansion by a differential method
DS/EN 14278-1:2004 Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device

Lithuanian Standards Office , How to use the differential heat meter

LST EN 3475-414-2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
LST EN ISO 14637:2007 Milk - Determination of urea content - Enzymatic method using difference in pH (Reference method) (ISO 14637:2004)
LST EN 993-19-2004 Methods of test for dense shaped refractory products - Part 19: Determination of thermal expansion by a differential method
LST EN 61290-5-3-2003 Optical fibre amplifiers. Basic specification. Part 5-3: Test methods for reflectance parameters. Reflectance tolerance using an electrical spectrum analyzer (IEC 61290-5-3:2002)
LST HD 480 S1-2002 Test method for evaluating thermal endurance of flexible sheet materials using the wrapped tube method (IEC 60795:1984)
LST EN 60444-5-2001 Measurement of quartz crystal unit parameters. Part 5: Methods for the determination of equivalent electrical parameters using automatic network analyzer techniques and error correction (IEC 60444-5:1995)
LST EN 14278-1-2004 Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device

HU-MSZT, How to use the differential heat meter

MSZ 8880/2.lap-1963

Korean Agency for Technology and Standards (KATS), How to use the differential heat meter

KS M 6695-2016(2021) Testing method of crack growth using Demattia flex-cracking apparatus
KS M 6695-1984 Testing method of crack growth using Demattia flex-cracking apparatus
KS M 6695-2016 Testing method of crack growth using Demattia flex-cracking apparatus
KS B 5648-2002(2022) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
KS C IEC 61290-5-3:2003 Basic specification for optical amplifier test methods－Part 5－3：Test methods for reflectance parameters－Reflectance tolerance using an electrical spectrum analyser
KS L ISO 4787:2006 Laboratory glassware-Volumetric glassware-Methods for use and testing of capacity
KS L ISO 4787:2016 Laboratory glassware－Volumetric glassware－Methods for use and testing of capacity
KS C 2132-1996(2021) Testing method for oxidative-induction time of polyolefins by differential scanning calorimetry
KS K ISO 17493:2021 Clothing and equipment for protection against heat — Test method for convective heat resistance using a hot air circulating oven
KS C IEC 60695-2-10:2001 Fire hazard testing－Part 2－10：Glowing/hot-wire based test methods：Glow-wire apparatus and common test procedure
KS M 3004-2013 Testing method for flow properties of thermoplastics with a capillary rheometer
KS H ISO 2971:2008 Cigarettes and filter rods-Determination of nominal diameter-Method using a laser beam measuring apparatus
KS H ISO 2971:2013 Cigarettes and filter rods -- Determination of nominal diameter -- Method using a laser beam measuring apparatus
KS H ISO 2971-2013(2018) Cigarettes and filter rods -- Determination of nominal diameter -- Method using a laser beam measuring apparatus
KS C IEC 60444-5:2016 Measurement of quartz crystal units parameters ― Part 5: Methods for the determination of equivalent electrical parameters using automatic network analyzer techniques and error correction
KS F 2393-2019 Standard test method for rheological properties of asphalt binder using dynamic shear rheometer

European Association of Aerospace Industries, How to use the differential heat meter

AECMA PREN 3475-414-1999 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 414: Differential Scanning Calorimeter (DSC Test) Edition P 1

Professional Standard - Machinery, How to use the differential heat meter

JB/T 6298-1992 Test method of determining combustion characteristics of coal with thermal analyzer
JB/T 8630-1997 Test method of determining melting heat, melting point and crystallization heat and crystallizing point of electrical insulation materials with differential scanning calorimetric method
JB/T 50119-1998 Test method of reliability of hot chamber die-casting machines and horizontal cold chamber die casting machines (only for internal use)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to use the differential heat meter

GB/T 8998-1988 Environmental thermoluminescence dosimeter and its usage
GB/T 17430-2015 Estimating the maximum service temperature of thermal insulation
GB/T 17430-1998 Estimating the maximum use temperature of thermal insulation
GB/T 12810-1991 Laboratory glassware--Volumetric galssware--Methods for use and testing of capacity

Standard Association of Australia （SAA）, How to use the differential heat meter

AS/NZS 3580.15:2014
AS 1580.401.3:2002(R2013)
AS/NZS 1580.601.5:1994 Paints and related materials - Methods of test - Colour - Calculation of small colour differences using the CMC equation

AASHTO - American Association of State Highway and Transportation Officials, How to use the differential heat meter

TP 63-2009 Standard Method of Test for Determining Rutting Susceptibility of Hot Mix Asphalt (HMA) Using the Asphalt Pavement Analyzer (APA)
T 340-2010 Standard Method of Test for Determining Rutting Susceptibility of Hot Mix Asphalt (HMA) Using the Asphalt Pavement Analyzer (APA)
TP 63-2007 Standard Method of Test for Determining Rutting Susceptibility of Hot-Mix Asphalt (HMA) Using the Asphalt Pavement Analyzer (APA)
TP 89-2013 Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester
TP 89-2010 Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester
T 370-2018 Standard Method of Test for Measuring Adhesion of Hot-Poured Asphalt Crack Sealant Using Direct Adhesion Tester
T 370-2017 Standard Method of Test for Measuring Adhesion of Hot-Poured Asphalt Crack Sealant Using Direct Adhesion Tester
T 278-1990 Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester
TP48-1994 Standard Test Method for Determinations of Unfilled Asphalts Using the Brookfield Thermosel Apparatus (Edition 1A)
T 245-1997 Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
T 245-2014 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
T 245-2013 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
TP 79-2009 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt (HMA) Using the Asphalt Mixture Performance Tester (AMPT)
TP 79-2012 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt (HMA) Using the Asphalt Mixture Performance Tester (AMPT)
TP 85-2010 Standard Method of Test for Apparent Viscosity of Hot-Poured Bituminous Crack Sealant Using Brookfield Rotational Viscometer RV Series Instrument (Revision 1)
TP 79-2011 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt: (HMA) Using the Asphalt Mixture Performance Tester (AMPT)

The American Road & Transportation Builders Association, How to use the differential heat meter

AASHTO T 340-2010 Standard Method of Test for Determining Rutting Susceptibility of Hot Mix Asphalt (HMA) Using the Asphalt Pavement Analyzer (APA)
AASHTO TP 89-2010 Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester
AASHTO TP 89-2013 Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester
AASHTO TP 85-2010 Standard Method of Test for Apparent Viscosity of Hot-Poured Bituminous Crack Sealant Using Brookfield Rotational Viscometer RV Series Instrument
AASHTO T 278-1990(R2007) Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester
AASHTO T 245-2013 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO T 245-2014 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO T 245-2015 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus

International Electrotechnical Commission (IEC), How to use the differential heat meter

IEC 61290-5-3:2002 Optical fibre amplifiers - Basic specifications - Part 5-3: Test methods for reflectance parameters; Reflectance tolerance test method using electrical spectrum analyzer
IEC PAS 60793-1-49:2002 Optical fibres - Part 1-49: Measurement methods and test procedures; Differential mode delay
IEC 60811-1-2:1985 Common test methods for insulating and sheathing materials of electric cables; part 1: methods for general application; section two: thermal ageing methods
IEC 60811-1-2/COR1:1986 Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section 2: Thermal ageing methods; Corrigendum 1

International Organization for Standardization (ISO), How to use the differential heat meter

ISO 9459-1:1993 Solar heating; domestic water heating systems; part 1: performance rating procedure using indoor test methods
ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
ISO 14934-2:2006 Fire tests - Calibration and use of heat flux meters - Part 2: Primary calibration methods
ISO 14934-2:2013 Fire tests - Calibration and use of heat flux meters - Part 2: Primary calibration methods
ISO 4787:2021 Laboratory glass and plastic ware — Volumetric instruments — Methods for testing of capacity and for use
ISO 2971:1998 Cigarettes and filter rods - Determination of nominal diameter - Method using a laser beam measuring apparatus
ISO/DIS 13506-1 Protective clothing against heat and flame — Part 1: Test method for complete garments — Measurement of transferred energy using an instrumented manikin
ISO 21283:2018 Iron ores - Determination of specific surface area - Test method using air-permeability apparatus (Blaine)
ISO 14934-3:2012 Fire tests - Calibration and use of heat flux meters - Part 3: Secondary calibration method

ZA-SANS, How to use the differential heat meter

SANS 60793-1-49:2006 Optical fibres Part 1-49: Measurement methods and test procedures - Differential mode delay
SANS 6211-2:2003 Domestic solar water heaters Part 2: Thermal performance using an indoor test method
SANS 6211-1:2003 Domestic solar water heaters Part 1: Thermal performance using an outdoor test method

(U.S.) Plastic Pipe Association, How to use the differential heat meter

PPI TN-28-2014 Guide to Differences in Pressure Rating PE Water Pipe using the ASTM/PPI and ISO Methods

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), How to use the differential heat meter

ASHRAE 4833-2006 Impacts of Manufacturing Tolerances of the Effectiveness-Ntu Method for Regenerative Exchanger Design

未注明发布机构, How to use the differential heat meter

BS 3730-3:1982(1999) Assessment of departures from roundness — Part 3 : Methods for determining departures from roundness using two - and three - point measurement
BS 7190:1989(2011) Method for Assessing thermal performance of low temperature hot water boilers using a test rig
BS 7334-2:1990(1999) Measuring instruments for building construction — Part 2 : Methods for determining accuracy in use : Measuring tapes Copyright

ES-UNE, How to use the differential heat meter

UNE-EN 3475-414:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test) (Endorsed by AENOR in December of 2005.)
UNE-EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification -- Part 5-3: Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser. (Endorsed by AENOR in October of 2002.)
UNE-EN 60444-5:1997 MEASUREMENT QUARTZ CRYSTAL UNIT PARAMETERS. PART 5: METHODS FOR THE DETERMINATION OF EQUIVALENT ELECTRICAL PARAMETERS USING AUTOMATIC NETWORK ANALYZER TECHNIQUES AND ERROR CORRECTION (Endorsed by AENOR in October of 1997.)
UNE-EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021) (Endorsed by Asociación Española de Normalización in February of 2022.)
UNE-EN ISO 13506-1:2017 Protective clothing against heat and flame - Part 1: Test method for complete garments - Measurement of transferred energy using an instrumented manikin (ISO 13506-1:2017) (Endorsed by Asociación Española de Normalización in November of 2017.)
UNE-EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (Endorsed by AENOR in May of 2008.)
UNE-EN 60749-40:2011 Semiconductor devices - Mechanical and climatic test methods - Part 40: Board level drop test method using a strain gauge (Endorsed by AENOR in November of 2011.)

国家市场监督管理总局、中国国家标准化管理委员会, How to use the differential heat meter

GB/T 38426-2019 Test method for thermal resistance and use temperature of sleeping bags
GB/T 12810-2021 Laboratory glassware—Capacity methods testing and use of volumetric instruments
GB/T 37945-2019 Materials for organic light emitting diode display(OLED)—Test method of glass transfer temperature—Differential scanning calorimetry (DSC)
GB/T 36965-2018 Test method for cross-linking degree of ethylene-vinyl acetate copolymer applied in photovoltaic modules—Differential scanning calorimetry（DSC）

Indonesia Standards, How to use the differential heat meter

SNI 4427-2008 Testing methods of hardness surface frictional properties using British Pendulum Tester (BPT)
SNI 7881-2013

ES-AENOR, How to use the differential heat meter

UNE 115-215-1991 Earth moving machinery. Operation and maintenance. Training of mechanics

AENOR, How to use the differential heat meter

UNE-EN ISO 14637:2007 Milk - Determination of urea content - Enzymatic method using difference in pH (Reference method) (ISO 14637:2004)
UNE 21795:1996 TEST METHOD FOR EVALUATING THERMAL ENDURANCE OF FLEXIBLE SHEET MATERIALS USING THE WRAPPED TUBE METHOD.
UNE-EN 993-19:2004 Methods of test for dense shaped refractory products - Part 19: Determination of thermal expansion by a differential method
UNE-EN 14278-1:2004 Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device

VN-TCVN, How to use the differential heat meter

TCVN 1044-2007 Laboratory glassware.Volumetric glassware.Methods for use and testing of capacity
TCVN 1044-2011 Laboratory glassware - Volumetric instruments Methods for testing of capacity and for use
TCVN 5077-2008 Cigarettes and filter rods.Determination of nominal diameter.Method using a laser beam measuring apparatus

IT-UNI, How to use the differential heat meter

UNI 7745-1977
UNI/TR 11800-2020 Thermal insulating for building applications - Guidelines for defining roles and methods of use and installation

Professional Standard - Press and Publication, How to use the differential heat meter

CY/T 40-2007 Application requirements and testing methods of EVA hot melt adhesives for bookbinding

RO-ASRO, How to use the differential heat meter

STAS 5730/4-1987 Surfaces condition RULES FOR THE MEASURE- MENT OF SURFACE ROUGHNESS USING STYLUS INSTRUMENTS
STAS 4952-1963

KR-KS, How to use the differential heat meter

KS K ISO 17493-2021 Clothing and equipment for protection against heat — Test method for convective heat resistance using a hot air circulating oven

GM Global, How to use the differential heat meter

GMW 8288-2012 General Specification for Thermal Evaluations Using Thermocouple and Infrared Imaging Methods Issue 2; English

European Committee for Electrotechnical Standardization（CENELEC）, How to use the differential heat meter

EN 61290-5-3:2002 Optical Fibre Amplifiers - Basic Specification Part 5-3: Test Methods for Reflectance Parameters - Reflectance Tolerance Using an Electrical Spectrum Analyser
EN IEC 63159-2-2:2021 Household electric instantaneous water heaters - Methods for measuring the performance - Part 2-2: Efficiency of single point of use electric instantaneous water heaters

TR-TSE, How to use the differential heat meter

TS 2950-1978 Measurement Of Water Flow In Closed Conduits - Tracer Methods Part III: Constant Rate Injection Method Using Radioactive Tracers

CU-NC, How to use the differential heat meter

NC 90-01-09-1986 Metrological Assurance Pasameters, Verification Methods and Means

TH-TISI, How to use the differential heat meter

TIS 1294-1995 Standard test method for flash point of cutback asphalt with tag open-cup

JP-JCS, How to use the differential heat meter

JCS 7505-2007 Fire proof test methods with small-type furnace for cable joints

International Telecommunication Union (ITU), How to use the differential heat meter

ITU-R BT.1789-2007 method to reconstruct received video using transmission error information for packet video transmission
ITU-R BT.1789 SPANISH-2007 method to reconstruct received video using transmission error information for packet video transmission
ITU-R BT.1789 FRENCH-2007 A method to reconstruct received video using transmission error information for packet video transmission

Professional Standard - Energy, How to use the differential heat meter

NB/T 11152-2023 Ground rules for use of geothermal drilling bits and wear assessment methods

Professional Standard - Education, How to use the differential heat meter

JY 0213-1994 Environment specification of tronsterence tore and tert for the mechanics heat teaching instrumentr

US-FCR, How to use the differential heat meter

FCR COE CRD-C 53-01-2001 TEST METHOD FOR CONSISTENCY OF NO-SLUMP CONCRETE USING THE MODIFIED VEBE APPARATUS

BE-NBN, How to use the differential heat meter

NBN-ISO 8322-8:1992 Building construction - Measuring instruments - Procedures for determining accuracy in use - Part 8 : Electronic distance-measuring instruments up to 150 m

Association of German Mechanical Engineers, How to use the differential heat meter

VDI 3958 Blatt 13-2014 Environmental simulation - Tropicalisation of paint coatings for outdoor use - Test methods

Canadian General Standards Board （CGSB), How to use the differential heat meter

CGSB 9.0 NO. 4-92-CAN/CGSB-1992 Methodes D'Essai Des Pates Et Du Papier Comportement A La Traction Des Papiers Et Cartons (A L'Aide D'Un Appareil A Vitesse Constante D'Allongement)