ZH
RU
ES
Particle size detection detection
Particle size detection detection, Total:500 items.
In the international standard classification, Particle size detection detection involves: Shipbuilding and marine structures in general, Miscellaneous domestic and commercial equipment, Products of the chemical industry, Analytical chemistry, Textile machinery, Soil quality. Pedology, Earthworks. Excavations. Foundation construction. Underground works, Cutting tools, Refractories, Non-destructive testing, Paint ingredients, Pharmaceutics, TESTING, Internal combustion engines, Construction materials, Vocabularies, Farming and forestry, Non-ferrous metals, Particle size analysis. Sieving, Welding, brazing and soldering, Testing of metals, Standardization. General rules, Raw materials for rubber and plastics, Air quality, Metalliferous minerals, Fuels, Ferroalloys, Ceramics, Continuous handling equipment, Fertilizers, Inorganic chemicals, Cork and cork products, Cereals, pulses and derived products, Pesticides and other agrochemicals, Semiconducting materials, Biology. Botany. Zoology, Power stations in general, Photography, Geology. Meteorology. Hydrology, Electricity. Magnetism. Electrical and magnetic measurements, Fluid power systems, Aerospace electric equipment and systems, Company organization and management, General methods of tests and analysis for food products, Nuclear energy engineering, Road vehicle systems, Road engineering, Optics and optical measurements, Test conditions and procedures in general, Equipment for entertainment, Milk and milk products, Semiconductor devices, Leather technology, Animal feeding stuffs, Paints and varnishes, Environmental protection, Linear and angular measurements, Sugar. Sugar products. Starch, Adhesives.
BR-ABNT, Particle size detection detection
Professional Standard-Ships, Particle size detection detection
- CB/T 3997-2008 Determination method of contaminating level by particles for marine fluid
HU-MSZT, Particle size detection detection
National Metrological Verification Regulations of the People's Republic of China, Particle size detection detection
- JJG(机械) 7-1990 Verification rules for single particle compressive strength tester
- JJG(机械) 5-1990 Verification Regulations for Particle Size Composition Determination Device
- JJG 902-1995 Verification Regulation of Patical Size Meter by Photosedimention
- JJG(电子) 310006-2006 Specification for verification of noise detectors for particle collision of devices
- JJG(地质) 1019-1990 SKC-2000 Type Light Transmission Particle Size Distribution Tester Verification Regulations
- JJG 718-1991 Verification Regulation of Mobile Detecting Meter of Temperature
- JJG 143-2020 Bridge deflection detector[
YU-JUS, Particle size detection detection
- JUS H.P5.011-1991 Testing of pesticides.Dusts,granules,microgranules and water-dispersible powder.Determination of bulk density
- JUS B.B8.105-1984 Testing of mineral filher. The deter,omatopm of grain sin distribution
- JUS H.B8.817-1992 Straight ammonium nitrate fertilizers of high nitrogen content - Determination of the particle size (granulometry)
- JUS K.F0.082-1989 Grains of ?iamon? and cublc boron nitrIde for bonded abrasive products. Hatbod of test of macrogrits
- JUS B.B8.031-1982 Crushed aggregate. Determination of particle density and water absorption
- JUS K.F0.005-1989 Gralns of fused alumiuium oxide and silicon carbide for boodod abrasivc products. Particle si?e measurement of microgrfts by Eppendorf - photosedimentometer
- JUS H.N8.221-1987 Testing ofpaper. Determination offolding endurance (Chopper testerj
- JUS D.A1.044-1979 Test ofwood Determination ofdensity
- JUS H.N8.210-1983 Testing of paper and paperboard. Mullen bursting strength test
- JUS H.M8.114-1982 Testing of accessory materials for rubber industr/. Determination of pour density of pelleted carbon black
- JUS D.A8.064-1985 Testing ofplywood. Determination ofdensity
- JUS D.C8.114-1983 Testing of particle boards. Determination ofdensity
- JUS D.A1.032-1979 Testingofvtood. Determmation ofstatic hardness
- JUS G.S2.022-1986 Leather. Physical testing. Measurement of thickness
Group Standards of the People's Republic of China, Particle size detection detection
- T/SAEPI 003-2019 Commercial Indoor Particles Concentration Detection System
- T/SDAS 447-2022 Detection method of main parameters of mask particle filtration efficiency detector
- T/CAQI 158-2020 General principles of integrity evaluation for inspection body and laboratory
- T/WJZZ 009-2021 Whole measurement calibration method of particle number concentration measuring instrument
- T/SSM 5-2022 Calibration specifications for particle number concentration measuring instruments used in motor vehicle emissions
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Particle size detection detection
- GB/T 13531.6-2018 General methods on determination of cosmetics—Determination of partical size
- GB/T 34168-2017 Test method of gold and silver nanoparticle materials biological effect by transmission electron microscope
- GB/T 34790-2017 Inspenction of grain and oils—Determination of water activity of grains—Instrumental method
Taiwan Provincial Standard of the People's Republic of China, Particle size detection detection
- CNS 15091-7-2007 Method of test for deep sea water - Determination of total suspended matters
- CNS 11750-1986 Glossary of Terms Related to Nondestructive Testing (Magnetic Particle Testing Terms)
- CNS 15091-2-2007 Method of test for deep sea water - Measurement of in-situ suspended particle transmission
- CNS 11378-1995 Magnetic Particle Test for Welds
- CNS 11048-1994 General Rule for Magnetic Particle Testing
- CNS 13341-2000 Method of Magnetic Particle Test for Welds of Steel Structure
- CNS 35-1947 Standard Testing Temperature
- CNS 11028-2007 Method of test for milk and milk products - Determination of scorched particles
- CNS 11028-1988 Method of Test for Milk and Milk Products: Determination of Scorched Particles
National Metrological Technical Specifications of the People's Republic of China, Particle size detection detection
International Organization for Standardization (ISO), Particle size detection detection
- ISO 17892-3:2015 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density
- ISO/TS 17892-3:2004/Cor 1:2006 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density - Pycnometer method
- ISO 3059:2012 Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions
- ISO 8840:1987 Refractory materials; Determination of bulk density of granular materials (grain density)
- ISO 8840:2021 Refractory materials - Determination of bulk density of granular materials (grain density)
- ISO/TS 17892-3:2004 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density - Pycnometer method
- ISO 13319:2000 Determination of particle size distributions - Electrical sensing zone method
- ISO 4700:1983 Iron ore pellets; Determination of crushing strength
- ISO 14966:2002 Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method
- ISO 16002:2004 Stored cereal grains and pulses - Guidance on the detection of infestation by live invertebrates by trapping
- ISO 9934-2:2002 Non-destructive testing - Magnetic particle testing - Part 2: Detection media
- ISO 9934-2:2015 Non-destructive testing - Magnetic particle testing - Part 2: Detection media
- ISO 18846:2016 Solid biofuels - Determination of fines content in samples of pellets
- ISO/FDIS 23484 Determination of particle concentration by small-angle X-ray scattering (SAXS)
- ISO 23484:2023 Determination of particle concentration by small-angle X-ray scattering (SAXS)
- ISO 18747-1:2018 Determination of particle density by sedimentation methods - Part 1: Isopycnic interpolation approach
- ISO 18747-2:2019 Determination of particle density by sedimentation methods — Part 2: Multi-velocity approach
- ISO 16831:2012 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
- ISO 9096:2003 Stationary source emissions - Manual determination of mass concentration of particulate matter
- ISO/TS 17892-2:2004 Reconnaissance et essais géotechniques - Essais de sol au laboratoire - Partie 2: Détermination de la masse volumique d'un sol fin (Première édition)
- ISO/TR 8942:1988 Rubber compounding ingredients; carbon black; determination of individual pellet crushing strength
- ISO 9096:2017 Stationary source emissions — Manual determination of mass concentration of particulate matter
- ISO 4405:1991 Hydraulic fluid power; fluid contamination; determination of particulate contamination by the gravimentric method
- ISO/CD 16811:2011 Non-destructive testing — Ultrasonic testing — Sensitivity and range setting
British Standards Institution (BSI), Particle size detection detection
- BS ISO 9136-1:2004 Abrasive grains. Determination of bulk density - Macrogrits
- BS ISO 8840:2021 Refractory materials. Determination of bulk density of granular materials (grain density)
- BS EN ISO 3059:2012 Non-destructive testing. Penetrant testing and magnetic particle testing. Viewing conditions
- BS ISO 9136-1:2005 Abrasive grains - Determination of bulk density - Macrogrits
- 21/30395144 DC BS ISO 8840. Refractory materials. Determination of bulk density of granular materials (grain density)
- BS ISO 18747-2:2019 Determination of particle density by sedimentation methods - Multi-velocity approach
- BS ISO 8511:2011 Rubber compounding ingredients. Carbon black. Determination of pellet size distribution
- BS ISO 14966:2002 Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method
- BS ISO 18747-1:2018 Determination of particle density by sedimentation methods - Isopycnic interpolation approach
- BS 7755-5.3:1998 Soil quality - Physical methods - Determination of particle density
- BS PD CEN/TR 12333:2021 Fertilizers. Crushing strength determination on fertilizers grains
- BS 6599:1985 Method for determination of crushing strength of iron ore pellets
- BS ISO 16002:2004 Stored cereal grains and pulses - Guidance on the detection of infestation by live invertebrates by trapping
- 23/30436644 DC BS ISO 19430. Determination of particle size distribution and number concentration by particle tracking analysis (PTA)
- BS EN 15415-3:2012 Solid recovered fuels. Determination of particle size distribution. Method by image analysis for large dimension particles
- BS DD CEN/TS 15150:2005 Solid biofuels — Methods for the determination of particle density
- BS DD CEN/TS 15150:2006 Solid biofuels. Methods for the determination of particle density
- BS EN ISO 11508:2017 Tracked Changes. Soil quality. Determination of particle density
- BS EN 15415-1:2011 Solid recovered fuels. Determination of particle size distribution. Screen method for small dimension particles
- BS ISO 13067:2011 Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
- BS ISO 15900:2020 Determination of particle size distribution. Differential electrical mobility analysis for aerosol particles
- BS DD CEN/TS 15405:2010 Solid recovered fuels. Determination of density of pellets and briquettes
- BS EN ISO 18846:2016 Solid biofuels. Determination of fines content in quantities of pellets
- BS ISO 23484:2023 Determination of particle concentration by small-angle X-ray scattering (SAXS)
- BS ISO 9096:2003 Stationary source emissions - Manual determination of mass concentration of particulate matter
- BS ISO 8942:2010 Rubber compounding ingredients. Carbon black. Determination of individual pellet crushing strength
- BS ISO 9096:2017 Stationary source emissions. Manual determination of mass concentration of particulate matter
- BS PD CEN/TS 16976:2016 Ambient air. Determination of the particle number concentration of atmospheric aerosol
- BS DD CEN/TS 15405:2006 Solid recovered fuels. Methods for the determination of density of pellets and briquettes
- DD CEN/TS 15405:2006 Solid recovered fuels — Methods for the determination of density of pellets and briquettes
- BS EN 16450:2017 Tracked Changes. Ambient air. Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
- BS EN ISO 16811:2014 Non-destructive testing. Ultrasonic testing. Sensitivity and range setting
- 19/30370177 DC BS ISO 15900. Determination of particle size distribution. Differential electrical mobility analysis for aerosol particles
Association Francaise de Normalisation, Particle size detection detection
- NF P94-054:1991 Soils : investigation and testing. Determination of particle density. Pycnometer method.
- FD E01-007:2021 Check of particle cleanliness - Principles and good practices
- NF A09-599*NF EN ISO 3059:2013 Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions
- NF X31-554:2014 Soil quality - Determination of particle density
- NF X34-112*NF EN ISO 18847:2016 Solid biofuels - Determination of particle density of pellets and briquettes
- NF ISO 9136-1:2005 Grains abrasifs - Détermination de la masse volumique apparente - Partie 1 : macrograins
- NF X31-554:1998 Soil quality. Determination of particle density.
- NF X31-554*NF EN ISO 11508:2017 Soil quality - Determination of particle density
- NF ISO 2031:2015 Granulés de liège - Détermination de la masse volumique apparente
- NF EN ISO 17830:2016 Biocombustibles solides - Détermination de la distribution granulométrique des granulés désintégrés
- FD U42-413*FD CEN/TR 12333:2021 Fertilizers - Crushing strength determination on fertilizer grains
- NF EN ISO 17831-1:2016 Biocombustibles solides - Détermination de la résistance mécanique des granulés et des briquettes - Partie 1 : granulés
- NF X11-634:1988 Granulométrie - Caractérisation de la taille et de la forme des éléments d'une population granulaire
- NF EN 60749-16:2003 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 16 : détection de bruit d'impact de particules (PIND)
- NF E48-682:2000 Hydraulic fluid power - On-line liquid automatic particle-counting systems for liquid - Methods of calibration and validation.
- NF EN 15415-2:2012 Combustibles solides de récupération - Détermination de la distribution granulométrique - Méthode (manuelle) de projection de la longueur maximale des particules de grande dimension
- NF ISO 16740:2005 Air des lieux de travail - Détermination du chrome hexavalent dans les particules en suspension dans l'air - Méthode par chromatographie ionique et détection spectrophotométrique avec diphényl carbazide
- NF X43-276*NF EN 481:1993 Workplace atmospheres. Size fraction definitions for measurement of airborne particles.
- NF X34-111*NF EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets
- NF EN ISO 17829:2016 Biocombustibles solides - Détermination de la longueur et du diamètre des granulés
- NF ISO 1306:2005 Ingrédients de mélange du caoutchouc - Noir de carbone (en granules) - Détermination de la masse volumique apparente
- NF X11-682:1984
- NF EN ISO 3452-5:2009 Essais non destructifs - Examen par ressuage - Partie 5 : examen par ressuage à des températures supérieures à 50oC
- NF EN ISO 3452-6:2009 Essais non destructifs - Examen par ressuage - Partie 6 : examen par ressuage a des températures inférieures à 10oC
- NF T30-044:1968 Paints. Determination of the particle size distribution of paint fillers by the ANDREASEN pipette method.
- NF T45-155:2005 Rubber compounding ingredients - Carbon black - Determination of individual pellet crushing strength.
- NF EN 543:2003 Adhésifs - Détermination de la masse volumique apparente des adhésifs en poudre et en granules
- NF EN ISO 18847:2016 Biocombustibles solides - Détermination de la masse volumique unitaire des granulés et des briquettes
- NF A09-333*NF EN ISO 16811:2014 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting
- NF A09-460*NF EN 1518:1998 Non-destructive testing. Leak testing. Characterization of mass spectrometer leak detectors.
- NF X43-021*NF EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10;PM2,5)
- NF ISO 6344-2:2022 Abrasifs appliqués - Détermination et désignation de la distribution granulométrique - Partie 2 : macrograins P12 à P220
CZ-CSN, Particle size detection detection
- CSN ISO 8840:1992 Rfractory materials. Determination of bulk density of granular materials (grain density)
- CSN 65 4824-1982 Fertilizers. Method for the determination of static strongth o? granules
- CSN 01 5015-1985 Non-destructive testing Magnetic particle method
- CSN 65 4812-1969 Determination of size and mechanical strength of granules in fertilizers
- CSN 72 1011-1980 Laboratory determination of apparent density of solid particles of soils
- CSN 79 3822-1961 Testing of leathers. Strength of leather grain at double bending
- CSN 46 7092-38-1998 Testing methods for feeding stuffs - Part 38: Determination of granules strength when pressed
PL-PKN, Particle size detection detection
- PN C04828-1991 Agents for laundering and washing. Powders and granules. Determination of granulity
- PN C87006-21-1991 Calcium-magnesium fertilizers Determination of grainsize
- PN C04860-10-1991 Ion exchange resins. Testing methods. Determination of the total strong acidic and weak acidic exchange capacitias of cationites
- PN C04860-05-1991 ?on exchange resins Testing methods Determination of granulometric composition (mesh analysis)
- PN B06714-43-1987 Mineral aggregates Testings Determination of compressive strength of particles contents
Professional Standard - Agriculture, Particle size detection detection
- 218药典 三部-2020 Physical examination method 0982 Particle size and particle size distribution method
- 302药典 四部-2020 4000 Testing methods for pharmaceutical packaging materials 4001 Determination of water resistance of glass particles at 121°C
- 124药典 四部-2020 0900 Characteristic inspection method 0982 Particle size and particle size distribution measurement method
- 143药典 四部-2015 0900 Characteristic inspection method 0982 Particle size and particle size distribution measurement method
- NY/T 1121.23-2010 Soil testing.Part 23:Method for determination of soil particle density
- 199药典 三部-2015 Physical inspection method 0982 General rules for particle size and particle size distribution determination method 47
- GB 12030-1989 Determination of Particle Size of Powdered Detergents
- 845兽药典 一部-2015 Appendix Contents 0900 Characteristic Inspection Method 0982 Particle Size and Particle Size Distribution Determination Method
- 811兽药典 二部-2015 Appendix Contents 0900 Characteristic Inspection Method 0941 Particle Size Measurement Method
- 农业部公告第1895号 New veterinary drugs: 1. Swine influenza virus (H1 subtype) ELISA antibody detection kit; 2. Banlangen granules
- 农业部公告第1797号 New veterinary drugs: 1. Mycoplasma pneumoniae ELISA antibody detection kit; 2. Chaige Jieji Granules
- GB 10212-1988 Determination of average compressive strength of ammonium phosphate and diammonium phosphate particles
- 空气和废气监测分析方法 5.3.2-2003 Chapter 5 Pollution Source Monitoring Chapter 3 Determination of Particulate Matter and Metal Compounds 2 Dust Particle Dispersion
Standard Association of Australia （SAA）, Particle size detection detection
- AS 1141.5:1996 Methods for sampling and testing aggregates Method 5: Particle density and water absorption of fine aggregate
- AS 1141.32:1995 Methods for sampling and testing aggregates Method 32: Weak particles (including clay lumps, soft and friable particles ) in coarse aggregates
- AS 1141.6.1:1995 Methods for sampling and testing aggregates Method 6.1: Particle density and water absorption of coarse aggregate - Weighing - in-waer method
- AS 2452.3:2005 Non-destructive testing - Determination of thickness - Use of ultrasonic testing
- AS 2891.11:2005 Methods of sampling and testing asphalt - Degree of particle coating
- AS ISO 3452.6:2020 Non-destructive testing — Penetrant testing, Part 6: Penetrant testing at temperatures lower than 10 °C
- AS ISO 3452.5:2020 Non-destructive testing — Penetrant testing, Part 5: Penetrant testing at temperatures higher than 50 °C
VN-TCVN, Particle size detection detection
- TCVN 6863-2001 Soil quality.Determination of particle density
- TCVN 4852-1989 Mineral fertilizers.Determination of grain static strength
- TCVN 5977-2009 Stationary source emissions.Manual determination of mass concentration of particulate matter
RO-ASRO, Particle size detection detection
ES-AENOR, Particle size detection detection
Professional Standard - Chemical Industry, Particle size detection detection
- HG/T 3400-2001 Determination of granule fineness of dyes
- HG/T 2224-1991 Determination of granular average compressive strength of granular double superphosphate
Korean Agency for Technology and Standards (KATS), Particle size detection detection
- KS I ISO 11508-2009(2014) Soil quality－Determination of particle density
- KS M ISO 18847:2022 Solid biofuels — Determination of particle density of pellets and briquettes
- KS M ISO 8511-2007(2022) Rubber compounding ingredients－Carbon black－Determination of pellet size distribution
- KS M ISO 8511-2007(2017) Rubber compounding ingredients－Carbon black－Determination of pellet size distribution
- KS E ISO 4700:2010 Iron ore pellets for blast furnace and direct reduction feedstocks-Determination of the crushing strength
- KS E ISO 4700:2017 Iron ore pellets for blast furnace and direct reduction feedstocks－Determination of the crushing strength
- KS L ISO 14703:2001 Fine ceramics(advanced ceramics, advanced technical ceramics)-Sample preparation for the determination of particle size distribution of ceramic powders
- KS L 6523-2016 Coated abrasives－Determination of grain size distribution of microgrits P12 to P220
- KS L ISO 14703:2016 Fine ceramics(advanced ceramics, advanced technical ceramics)－Sample preparation for the determination of particle size distribution of ceramic powders
- KS M ISO 2031:2020 Granulated cork — Determination of apparent bulk density
- KS B ISO 9934-2:2007 Non-destructive testing－Magnetic particle testing－Part 2：Detection media
- KS L 1614-2001 Determination of particle size distributions for fine ceramic raw powders by laser diffraction method
- KS M ISO 17829:2021 Solid Biofuels — Determination of length and diameter of pellets
- KS B ISO 3452-5:2022 Non-destructive testing — Penetrant testing — Part 5: Penetrant testing at temperatures higher than 50 ℃
- KS B ISO 3452-6:2022 Non-destructive testing — Penetrant testing — Part 6: Penetrant testing at temperatures lower than 10 ℃
- KS C IEC 60749-16-2006(2021) Semiconductor devices－Mechanical and climatic test methods－Part 16：Particle impact noise detection(PIND)
- KS I ISO 9096:2009 Stationary source emissions－Manual determination of mass concentration of particulate matter
- KS M ISO 3379-2016(2021) Leather－Determination of distension and strength of grain－Ball burst test
- KS I ISO 9096:2020 Stationary source emissions — Manual determination of mass concentration of particulate matter
- KS I ISO 4405:2005 Hydraulic fluid power－Fluid contamination－Determination of particulate contamination by the gravimetric method
Professional Standard - Machinery, Particle size detection detection
RU-GOST R, Particle size detection detection
- GOST 5636-1982 Steel and alloys. Methods of detection and determination of grain size
- GOST 21073.2-1975 Non-ferrous metals. Determination of grain size bu grain calculation method
- GOST ISO 8840-2014 Refractory materials. Determination of bulk density of granular materials (grain density)
- GOST 34236-2017 Light and middle distillate fuels. Determination of sizing and counting particles by automatic particle counter
- GOST 33507-2015 Solid biofuel. Determination of particle density
- GOST 21560.2-1982 Mineral fertilizers. Method for determination of granules static strength
- GOST R 55124-2012 Solid biofuels. Determination of particle density
- GOST R 55550-2013 Solid biofuels. Determination of particle size distribution of disintegrated pellets
- GOST R ISO 12984-2015 Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of particle size distribution
- GOST 33399-2015 Testing of chemicals of environmental hazard. Determination of the particle size distribution/determination of the fibre length and diameter distribution. Method A: Particle size distribution (effective hydrodynamic radius). Method B: Fibre length and dia
European Committee for Standardization (CEN), Particle size detection detection
- prEN ISO 18847 rev Solid biofuels — Determination of particle density of pellets and briquettes
- EN ISO 18847:2016 Solid biofuels - Determination of particle density of pellets and briquettes
- PD CEN/TR 16638:2014 Non-destructive testing - Penetrant and magnetic particle testing using blue light
- EN 15150:2011 Solid biofuels - Determination of particle density
- PD CEN/TR 12333:2021 Fertilizers - Crushing strength determination on fertilizers grains
- EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum
- EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
- EN 993-17:1998 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
- EN ISO 23278:2009 Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels [Superseded: CEN EN 1291]
- CEN/TS 15405:2010 Solid recovered fuels - Determination of density of pellets and briquettes
- prEN ISO 16811 rev Non-destructive testing — Ultrasonic testing — Sensitivity and range setting
- PD CEN/TS 16450:2013 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
KR-KS, Particle size detection detection
- KS M ISO 18847-2022 Solid biofuels — Determination of particle density of pellets and briquettes
- KS M ISO 2031-2020 Granulated cork — Determination of apparent bulk density
- KS M ISO 17829-2021 Solid Biofuels — Determination of length and diameter of pellets
- KS B ISO 3452-5-2022 Non-destructive testing — Penetrant testing — Part 5: Penetrant testing at temperatures higher than 50 ℃
- KS B ISO 3452-6-2022 Non-destructive testing — Penetrant testing — Part 6: Penetrant testing at temperatures lower than 10 ℃
- KS I ISO 9096-2020 Stationary source emissions — Manual determination of mass concentration of particulate matter
未注明发布机构, Particle size detection detection
German Institute for Standardization, Particle size detection detection
- DIN EN ISO 18847:2016-12 Solid biofuels - Determination of particle density of pellets and briquettes (ISO 18847:2016); German version EN ISO 18847:2016
- DIN EN ISO 11508:2018-04 Soil quality - Determination of particle density (ISO 11508:2017); German version EN ISO 11508:2017
- DIN EN ISO 23278:2010 Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels (ISO 23278:2006); German version EN ISO 23278:2009
- DIN EN ISO 18847:2023-07 Solid biofuels - Determination of particle density of pellets and briquettes (ISO/DIS 18847:2023); German and English version prEN ISO 18847:2023 / Note: Date of issue 2023-05-26*Intended as replacement for DIN EN ISO 18847 (2016-12).
- DIN 50452-2:1991 Testing of materials for semiconductor technology; test method for particle analysis in liquids; determination of particles with optical particle counters
- DIN EN 16450:2017-07 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5); German version EN 16450:2017
- DIN ISO 9136-1:2006-03 Abrasive grains - Determination of bulk density - Part 1: Macrogrits (ISO 9136-1:2004)
- DIN 25435-2:2021 In-service inspections for primary coolant circuit components of light water reactors - Part 2: Magnetic particle and penetrant testing
- DIN EN ISO 17829:2016-03 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015); German version EN ISO 17829:2015
- DIN CEN/TS 15405:2010-11*DIN SPEC 1152:2010-11 Solid recovered fuels - Determination of density of pellets and briquettes; German version CEN/TS 15405:2010
- DIN EN ISO 3452-6:2009-04 Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 °C (ISO 3452-6:2008); German version EN ISO 3452-6:2008
- DIN EN ISO 3452-5:2009-04 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 °C (ISO 3452-5:2008); German version EN ISO 3452-5:2008
- DIN 33899-2:2014 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
- DIN 18124:2019-02 Soil, investigation and testing - Determination of density of solid particles - Wide mouth pycnometer
- DIN 50601:1985 Metallographic examination; determination of the ferritic or austenitic grain size of steel and ferrous materials
- DIN EN 451-2:1995 Method of testing fly ash - Part 2: Determination of fineness by wet sieving; German version EN 451-2:1994
- DIN EN ISO 23278:2015 Non-destructive testing of welds - Magnetic particle testing - Acceptance levels (ISO 23278:2015); German version EN ISO 23278:2015
- DIN EN 543:2003-08 Adhesives - Determination of apparent density of powder and granule adhesives; German version EN 543:2003
- DIN EN ISO 16811:2014-06 Non-destructive testing - Ultrasonic testing - Sensitivity and range setting (ISO 16811:2012); German version EN ISO 16811:2014
ES-UNE, Particle size detection detection
- ISO/DIS 18847:2023 Solid biofuels — Determination of particle density of pellets and briquettes
- UNE-CEN/TR 12333:2021 Fertilizers - Crushing strength determination on fertilizers grains (Endorsed by Asociación Española de Normalización in July of 2021.)
- ISO/TS 24672:2023 Nanotechnologies — Guidance on the measurement of nanoparticle number concentration
- UNE-ISO 9096:2005/COR 1:2009 Stationary source emissions -- Manual determination of mass concentration of particulate matter
- UNE-EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
- UNE-CEN/TS 16976:2016 Ambient air - Determination of the particle number concentration of atmospheric aerosol (Endorsed by Asociación Española de Normalización in January of 2021.)
Professional Standard - Environmental Protection, Particle size detection detection
- HJ/T 374-2007 Technical requirement and test procedures for total suspended particulates sampler
- HJ 93-2013 Specifications and test procedures for PM<下标10> and PM<下标2.5> sampler
- HJ 653-2013 Specifications and test procedures for ambient air quality continuous automated monitoring system for PM<下标10> and PM<下标2.5>
- HJ 653-2021 Technical requirements and detection methods for continuous automatic monitoring system of ambient air particulate matter (PM10 and PM2.5)
- HJ 76-2017 Technical requirements and detection methods of continuous monitoring system for flue gas (SO2, NOx, particulate matter) emissions from stationary pollution sources
- HJ 93-2013(XG1-2018) Ambient air particulate matter (PM10 and PM2.5) sampler technical requirements and detection methods "No. 1 Amendment"
- HJ 653-2013(XG1-2018) Ambient Air Particulate Matter (PM10 and PM2.5) Continuous Automatic Monitoring System Technical Requirements and Detection Methods "No. 1 Amendment"
工业和信息化部/国家能源局, Particle size detection detection
- JB/T 12895-2016 Classification and detection method of pollutant particles in internal combustion engine lubricating oil
Professional Standard - Building Materials, Particle size detection detection
PT-IPQ, Particle size detection detection
AENOR, Particle size detection detection
- UNE 56919:1990 GRANULATED CORK. BULK DENSITY TEST.
- UNE 103302:1994 DETERMINATION OF THE RELATIVE DENSITY OF THE PARTICLES OF A SOIL.
- UNE-EN ISO 18847:2017 Solid biofuels - Determination of particle density of pellets and briquettes (ISO 18847:2016)
- UNE-ISO 9096:2005 Stationary source emissions -- Manual determination of mass concentration of particulate matter
- UNE-EN 543:2003 Adhesives - Determination of apparent density of powder and granule adhesives
- UNE-EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
Japanese Industrial Standards Committee (JISC), Particle size detection detection
- JIS K 0554:1995 Testing methods for concentration of fine particles in highly purified water
- JIS M 8718:2000 Iron ore pellets -- Determination of crushing strength
- JIS M 8718:2009 Iron ore pellets -- Determination of crushing strength
- JIS K 6219-4:2006 Carbon black for rubber industry -- Characteristics of pelletized carbon black -- Part 4: Determination of pellet size distribution
- JIS M 8718:1993 Iron ore pellets -- Determination of crushing strength
- JIS R 1620:1995 Testing methods for particle density of fine ceramic powder
- JIS Z 2320-2:2007 Non-destructive testing -- Magnetic particle testing -- Part 2: Detection media
- JIS K 6219-3:2006 Carbon black for rubber industry -- Characteristics of pelletized carbon black -- Part 3: Determination of individual pellet crushing strength
- JIS R 6001-2:2017 Bonded abrasives -- Determination and designation of grain size distribution -- Part 2: Microgrits
Inner Mongolia Provincial Standard of the People's Republic of China, Particle size detection detection
- DB15/T 2322-2021 Test and evaluation procedure for kernel hardness of naked oats
SE-SIS, Particle size detection detection
- SIS SS 13 21 14-1978 Concrete testing — Aggregate — Grain density
- SIS SS 13 63 21-1982 Glass — Determination of the hydrolytic resistance of glass grams at 98℃
- SIS SS 13 63 23-1982 Glass — Determination of the hydrolytic resistance of glass grains at 121 C
- SIS SS 18 71 80-1990 Biofuels and peat — Determination of mechanical strength for pellets
- SIS SS IEC 692:1984 Nuclear instrumentation — Density meters utilizing ionizing radiation — Definitions and test methods
- SIS SS-ISO 9279:1992 Uranium dioxide pellets — Determination of density and total porosity — Mercury displacement method
- SIS SS 11 42 03-1988 Non-destructive testing - Ultrasonic testing of sheet (strip) and plate with thickness ≥5mm
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Particle size detection detection
- GB/T 12030-1989 Determination of particle size of podered detergents
- GB/T 7702.2-1997 Standard test method for granular activated carbon from coal--Determination of particle size
- GB/T 13247-1991 Ferroalloys-Sampling and testing methods for determination of grain Size
- GB/T 9984.8-1988 Determination of particle size for industrial use--Sodium tripotyphosphate
- GB/T 9984.8-2004 Sodium tripolyphosphate for industrial use-Determination of particle size
- GB/T 27596-2011 Dyestuffs.Determination of particle fineness.Microscope method
- GB/T 29024.3-2012 Determination of particle size distribution.Single particle light interaction methods.Part 3:Light extinction liquid-borne particle counter
- GB/T 29024.2-2016 Determination of particle size distribution.Single particle light interaction methods.Part 2:Light scattering liquid-borne particle counter
- GB/T 10516-1989 The determination of average crushing strength for nitrophosphate
- GB/T 10558-1989 Method for measuring the root-mean-square(RMS) granularity of photographic materials/process combination
- GB 10558-1989 Method for determination of root mean square particle size of photosensitive materials
- GB 10516-1989 The determination of average crushing strength for nitrophosphate
- GB/T 7702.3-1997 Standard test method for granular activated carbon from coal--Determination of hardness
- GB/T 7702.3-2008 Test method for granular activated carbon from coal-Determination of hardness
- GB/T 28873-2012 General guide of environmental scanning electron microscopy for biological effectes on topography induced by nanoparticles
- GB/T 18851.5-2014 Non-destructive testing.Penetrant testing.Part 5:Penetrant testing at temperatures higher than 50℃
- GB/T 18851.6-2014 Non-destructive testing.Penetrant testing.Part 6:Penetrant testing at temperatures lower than 10℃
- GB/T 14853.6-2013 Rubber compounding ingredients.Pelletized carbon black.Part 6:Determination of individual pellet crushing strength
- GB/T 31057.1-2014 Granular materials.The physical properties.Part 1:Determination of apparent density
- GB/T 25266-2010 Paints.Determination of the particle size distribution of paint fillers by the ANDREASEN pipette method
- GB/T 2481.1-1998 Bonded abrasives--Determination and designation of grain size distribution--Part 1: Macrogrits F4 to F220
- GB/T 11336-1989 Measurement of departures from straightness
- GB/T 11337-1989 Measurement of departures from flatness
- GB/T 11336-2004 Measurement of departures from straightness
- GB/T 11337-2004 Measurement of departures from flatness
- GB/T 10212-1988 The determination of granula average crushing strength for monoammonium phosphate and diammonium phosphate
- GB/T 7702.4-1997 Standard test method for granular activated carbon from coal--Determination of apparent density
- GB/T 43196-2023 Nanotechnology Scanning Electron Microscopy to Measure Nanoparticle Size and Shape Distribution
Danish Standards Foundation, Particle size detection detection
- DS/ISO 11508:1999 Soil quality - Determination of particle density
- DS/EN 16126:2012 Solid biofuels - Determination of particle size distribution of disintegrated pellets
- DS/EN 15150:2012 Solid biofuels - Determination of particle density
- DS/CEN/CR 12333:2006 Fertilizers - Crushing strength determination on fertilizer grains
- DS/CEN/TR 12333:2021 Fertilizers – Crushing strength determination on fertilizers grains
- DS/CEN/TS 15405:2010 Solid recovered fuels - Determination of density of pellets and briquettes
- DS/EN 16127:2012 Solid biofuels - Determination of length and diameter of pellets
- DS/EN ISO 3452-5:2009 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C
- DS/EN ISO 3452-6:2009 Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 degrees C
- DS 406.2:1987 Lightweight aggregates for concrete. Determination of grain density and water absorption
- DS/EN 543:2003 Adhesives - Determination of apparent density of powder and granule adhesives
- DS/EN ISO 14720-1:2013 Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 1: Infrared measurement methods
- DS/CEN/TS 16450:2013 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
Anhui Provincial Standard of the People's Republic of China, Particle size detection detection
- DB34/T 392-2004 Test method for laser determination of inhalable particulate matter in indoor air
Professional Standard - Commodity Inspection, Particle size detection detection
- SN/T 0990-2001 Method for the determination of whiteness,acidity and swelling capacity of granular bentonite for export
- SN/T 0736.3-1997 Method of inspection for import and export fertilizers.Determination of granule size
- SN/T 0736.3-2011 Test method of import and export fertilizers.Part 3:Determination of granule size
Professional Standard - Ferrous Metallurgy, Particle size detection detection
- YB/T 4290-2012 Determination method of the largest grain size grade (ALA grain size) on the metallographic inspection surface
- YB/T 4183-2009 Laser Diffraction Method for Determination of Particle Size Distribution of Smelting Slag Powder
American Society of Mechanical Engineers (ASME), Particle size detection detection
- ASME PTC 38-1980 Determining the Concentration of Particulate Matter in a Gas Stream
CU-NC, Particle size detection detection
- NC 43-09-1968 Particle boards and fibre boards Determinatipn of density
NL-NEN, Particle size detection detection
- NEN 5932-1990 Aggregates for concrete - Determination of partiele strength
- NEN 5926-1990 Aggregates for concrete - Determination of partiele density
IT-UNI, Particle size detection detection
Professional Standard - Electricity, Particle size detection detection
- DL/T 432-2018 Determination method of particle size in electric power oil
- DL/T 432-2007 Determination of particulate contamination in oil
- DL/T 1915-2018 Gravimetric method for testing technical specifications of low-concentration particulate matter in thermal power plants
Professional Standard - Non-ferrous Metal, Particle size detection detection
- YS/T 587.11-2006 Calcined coke for prebaked blocks. Testing methods. Part 11: Determination of grain stability
- YS/T 587.12-2006 Calcined coke for prebaked blocks. Testing methods. Part 12: Determination of particle size distribution
Professional Standard - Military and Civilian Products, Particle size detection detection
- WJ 2276-1995 Verification rules for activated carbon and impregnated carbon particle size analyzer
国家市场监督管理总局、中国国家标准化管理委员会, Particle size detection detection
- GB/T 13247-2019 Methods for sampling and testing the grain size of ferroalloys products
- GB/T 40170-2021 Principle of plasmid extraction and testing
- GB/T 37406-2019 Detection method of degree of sphericity of spherical silica for electronic packaging—Particle dynamic photoelectric projection method
- GB/T 37163-2018 Hydraulic fluid power—Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
- GB/T 39193-2020 Ambient air—Determination of particulate matter mass concentration—Gravimetric method
- GB/T 39079-2020 Inspection and test specifications of large-scale amusement device—Acceleration test
- GB/T 31057.2-2018 Granular materials—Physical properties—Part 2: Determination of tap density
- GB/T 39242-2020 Non-destructive testing—Ultrasonic testing—Sensitivity and range setting
- GB/T 38898-2020 Non-destructive testing—Testing method for measuring coating bond strength using ultrasonic wave
- GB/T 37122-2018 Non-destructive testing—Phantom of maximum detectable steel thickness for industrial computed tomography(CT)
- GB/T 37158-2018 Non-destructive testing—Test method for measuring the maximum detectable steel thickness by industrial computed tomography(CT)
Lithuanian Standards Office , Particle size detection detection
- LST EN 16126-2012 Solid biofuels - Determination of particle size distribution of disintegrated pellets
- LST EN 15150-2012 Solid biofuels - Determination of particle density
- LST CEN/TS 15405-2010 Solid recovered fuels - Determination of density of pellets and briquettes
- LST EN 16127-2012 Solid biofuels - Determination of length and diameter of pellets
- LST 1360.7-1995 Soils for road construction. Testing methods. Determination density of solid particles
- LST EN 543-2003 Adhesives - Determination of apparent density of powder and granule adhesives
Professional Standard - Aerospace, Particle size detection detection
- QJ 2863-1996 Particle impact noise detection (PIND) requirements and methods for aerospace electronic components
BE-NBN, Particle size detection detection
Institute of Environmental Sciences and Technology, Particle size detection detection
American Society for Testing and Materials (ASTM), Particle size detection detection
- ASTM E727/E727M-08(2013)e1 Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
- ASTM E727-91(1998) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
- ASTM E727-02 Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
- ASTM E727/E727M-08(2020) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
- ASTM E1772-95 Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
- ASTM E1772-95(2001) Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
- ASTM D4176-21 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
- ASTM D4176-93(1997) Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
- ASTM D4176-02 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
- ASTM D4176-22 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
- ASTM D4781-03(2018)e1 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
- ASTM E382-12 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
- ASTM F50-21 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
Association of German Mechanical Engineers, Particle size detection detection
- VDI 2463 Blatt 1-1999 Particulate matter measurement - Gravimetric determination of mass concentration of suspended particulate matter in ambient air - General principles
- VDI 3867 Blatt 5-2013 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Time-of-flight spectrometer
- VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)
- VDI 3867 Blatt 4-2011 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Optical aerosol spectrometer
- VDI 3867 Blatt 3-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical mobility spectrometer
- VDI 3867 Blatt 1-2009 Measurement of particulate matter in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Fundamentals
Military Standard of the People's Republic of China-General Armament Department, Particle size detection detection
- GJB 380.4-1987 Aircraft hydraulic system contamination test uses automatic particle counter to determine oil solid particle contamination degree
- GJB 380.4A-2015 Aviation Service Fluid Contamination Testing Part 4: Determination of Solid Particle Contamination by Automatic Particle Counting Method
化学工业部, Particle size detection detection
- HG 2224-1991 Determination of the granular average compressive temperature of granular heavy superphosphate
Professional Standard - Civil Aviation, Particle size detection detection
- MH/T 6068-2010 Standard test method for free water, particulate and other contamination in aviation fuel-Field inspection procedures
- MH/T 6068-2017 Standard test method for free water, particulate and other contamination in aviation fuels.Field inspection procedures
FI-SFS, Particle size detection detection
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Particle size detection detection
- GJB 380.4A-2004 Contamination test method of operating liquid for aviation Part 4:Determination of solid particle contamination level by automatic particle counting method
Professional Standard - Aviation, Particle size detection detection
- HB 5931.4-1986 Determination of Solid Particle Contamination Degree of Working Fluid Using Automatic Particle Counter for Contamination Test of Aircraft Hydraulic System
- HB 8581-2020 Hydraulic fluid power- Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light- extinction principle
GB-REG, Particle size detection detection
American National Standards Institute （ANSI), Particle size detection detection
中国气象局, Particle size detection detection
- QX/T 509-2019 GRIMM 180 Particulate Matter Concentration Monitor Calibration Specifications
NZ-SNZ, Particle size detection detection
- NZS 4407.3.7.1:1991 Methods of sampling and testing road aggregates Test 3.7.1 Pycnometer method for particles passing the 19 mm test sieve
- NZS 4407.3.13:1991 Methods of sampling and testing road aggregates Test 3.13 The size and shape of aggregate particles
Professional Standard - Electron, Particle size detection detection
- SJ 2253-1982 Method of measurement of granularity of cathode carbonate
CEN - European Committee for Standardization, Particle size detection detection
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Particle size detection detection
- ASHRAE 4328-2000 Method for Measuring Ice Slurry Particle Agglormeration in Storage Tanks
Occupational Health Standard of the People's Republic of China, Particle size detection detection
- GBZ/T 192.6-2018 Determination of dust in the air of workplaces - Part 6: Ultrafine particles and total fine particle concentration
The American Road & Transportation Builders Association, Particle size detection detection
- AASHTO T 195-1967 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
GOSTR, Particle size detection detection
- GOST 34089-2017 Solid biofuel. Determination of length and diameter of pellets
Indonesia Standards, Particle size detection detection
Canadian Standards Association (CSA), Particle size detection detection
- CSA ISO 18847:2021 Solid biofuels - Determination of particle density of pellets and briquettes (Adopted ISO 18847:2016, first edition, 2016-09-01)
AASHTO - American Association of State Highway and Transportation Officials, Particle size detection detection
- T 311-2000 Standard Method of Test for Grain-Size Analysis of Granular Soil Materials (Twentieth Edition)
North Atlantic Treaty Organization Standards Agency, Particle size detection detection
- STANAG 3713-2008 DETERMINATION OF PARTICULATE MATTER IN AEROSPACE HYDRAULIC FLUIDS USING A PARTICLE SIZE ANALYSER
PH-BPS, Particle size detection detection
NO-SN, Particle size detection detection
- NS 8012-1982 Geotechnical testing - Laboratory methods - Density of solid particles
NATO - North Atlantic Treaty Organization, Particle size detection detection
- STANAG 3713-1990 Determination of Particulate Matter in Aerospace Hydraulic Fluids Using a Particle Size Analyser (ED 3 AMD 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +
AR-IRAM, Particle size detection detection
Professional Standard - Post and Telecommunication, Particle size detection detection
Society of Automotive Engineers (SAE), Particle size detection detection
Guangxi Provincial Standard of the People's Republic of China, Particle size detection detection
- DB45/T 1151-2015 Method for testing the number of yellow grains in white granulated sugar products
TH-TISI, Particle size detection detection
- TIS 1850-1999 Rubber compounding ingredients.carbon black.determination of individual pellet crushing strength