ZH
RU
ES

Table 2 Main Instruments

Table 2 Main Instruments, Total:393 items.

In the international standard classification, Table 2 Main Instruments involves: Nuclear energy engineering, Installations in buildings, Electricity. Magnetism. Electrical and magnetic measurements, Machine tools, Occupational safety. Industrial hygiene, Thermodynamics and temperature measurements, Fasteners for aerospace construction, Radiation measurements, Industrial automation systems, Linear and angular measurements, Metrology and measurement in general, Paper products, Resistors, Transformers. Reactors, Environmental testing, Radiation protection, On-board equipment and instruments, Transport, Electrical accessories, Materials for aerospace construction, Ground service and maintenance equipment, Shipbuilding and marine structures in general, Rubber and plastics products, Medical equipment, Measurement of fluid flow, Components for electrical equipment, Acoustics and acoustic measurements, Optics and optical measurements, Protection against fire, Ventilators. Fans. Air-conditioners, Equipment for the chemical industry, Protection of and in buildings, Applications of information technology, Horology, Clothes, Audio, video and audiovisual engineering, Sports equipment and facilities, Lubricants, industrial oils and related products, Vocabularies, Graphical symbols, Analytical chemistry, Burners. Boilers, Biology. Botany. Zoology, Microbiology, Sterilization and disinfection, Mechanical structures for electronic equipment, Screw threads, Bottles. Pots. Jars, Non-destructive testing, Aids for disabled or handicapped persons, Equipment for petroleum and natural gas industries, Photography, Measurement of force, weight and pressure, Measurement of volume, mass, density, viscosity, Mechanical testing.

PL-PKN, Table 2 Main Instruments

PN G03352-1972 Driliing geophysies Ends of heads ins?ruments intratelluric Principal parame?ers
PN E88000-1969 Switchboard electrical measuring instruments Main overall dimenjions
PN T06564-1972 Microwave measuring instruments Power meters General ra?uirements and tests
PN E06513-1987 Hlectricity meters Meters with maximum demand indicators Requirements and tests
PN-EN IEC 60051-2-2021-09 E Direct acting indicating analogue electrical measuring instruments and their accessories -- Part 2: Special requirements for ammeters and voltmeters (IEC 60051-2:2018)
PN G02316-1991 Measuring meters for hydrogeology. Electrical water level meters with recorders. Types, principal parameters and technical requirements
PN G02317-1991 Measuring meters for hydrogeology. Mechanical water level meters with boosters. Types, principal parameters and technical requirements
PN-EN ISO 20785-2-2021-01 E Dosimetry for exposures to cosmic radiation in civilian aircraft -- Part 2: Characterization of instrument response (ISO 20785-2:2020)

AT-ON, Table 2 Main Instruments

ONORM M 5900-1960
OVE/ONORM E 2792-1999 Electrical installations - House connection feeders, mains (service connection), meter boards

Professional Standard - Machinery, Table 2 Main Instruments

JB/T 9265-1999 Main construction dimension sersie of instrument cabinets and chassis
JB/T 6843-2014 Procedures and requirements on reliability design of instrumentation
JB/T 6843-1993 Design procedure and requirement for reliability of instruments and meters
JB/T 6183-2014 Rules for the preparation of reliability requirements and assessment methods of instrumentation
JB/T 6183-1992 Code for reliability requirement and compilation of examination method for instrumentation

German Institute for Standardization, Table 2 Main Instruments

DIN 43859:1977-06 Watthour meters for instrument-transformer connection; main dimensions for three-phase meters
DIN 43859:1977 Watthour meters for instrument-transformer connection; main dimensions for three-phase meters
DIN 43853:1988 Meter boards; main dimensions and termination dimension
DIN 42600-2:2013 Instrument transformers for 50 Hz, U<(Index)m> 0,72 kV to 52 kV - Part 2: Current transformers U<(Index)m> = 0,72 kV and U<(Index)m> = 1,2 kV - Main dimensions
DIN 8254:1974 Shock-absorber for watches; main dimensions, fits
DIN 42600-7:1986 Instrument transformers for 50 Hz, U<(Index)m> to 52 kV; voltage transformers U<(Index)m> 12 kV; narrow design, main dimensions, indoor type
DIN 42600-9:1985 Instruments transformers for 50 Hz, U<(Index)m> 0,6 to 52 kV; voltage transformers U<(Index)m> 12 and 24 kV; narrow design, main dimensions, indoor type
DIN EN 61869-3:2012 Instrument transformers - Part 3: Additional requirements for inductive voltage transformers (IEC 61869-3:2011); German version EN 61869-3:2011
DIN 43857-1:1978 Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for single-phase meters
DIN 43857-2:1978 Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for poly-phase meters
DIN 42600-5:1977 Instrument transformers for 50 Hz, HSV 0,6 to 52 kV; current transformers (support-type-insulator) HSV 12 to 36 kV, large design, main dimensions, indoor type
DIN EN 60405:2007 Nuclear instrumentation - Constructional requirements and classification of radiometric gauges (IEC 60405:2003, modified); German version EN 60405:2007
DIN EN 61869-2:2013 Instrument transformers - Part 2: Additional requirements for current transformers (IEC 61869-2:2012); German version EN 61869-2:2012
DIN 49073:2007 Metal boxes and boxes of insulating material for recessed mounting for accomodation of accessories up to 16 A 250 V and socket-outlets according to DIN 49445, DIN 49447 and DIN EN 60309-2 (VDE 0623-20) up to 32 A 690 V - Main dimensions
DIN 42600-2:1983 Instrument transformers for 50 Hz, U<(Index)m> 0,6 to 52 kV; current transformers U<(Index)m>=0,8 kV; main dimensions
DIN 42600-4:1977 Instrument transformers for 50 Hz, HSV 0,6 to 52 kV; currenttransformers (support-typ-insulator), HSV 12 kV, small design, main dimensions, indoor type
DIN 42600-8:1983 Instrument transformers for 50 Hz, U<(Index)m> 0,6 to 52 kV; current transformers (support-type-insulators) U<(Index)m> 12 and 24 kV; narrow design, main dimensions, indoor type
DIN EN 13312-2:2001-07 Biotechnology - Performance criteria for piping and instrumentation - Part 2: Couplings; German version EN 13312-2:2001
DIN 43857-5:1998 Watthour meters in moulded case without instrument transformers up to 60 A rated maximum current - Part 5: Principal dimensions for terminal cover
DIN EN 61869-2 Berichtigung 1:2014 Instrument transformers - Part 2: Additional requirements for current transformers (IEC 61869-2:2012); German version EN 61869-2:2012, Corrigendum to DIN EN 61869-2 (VDE 0414-9-2):2013-07
DIN 49073-1:1990 Metal boxes and boxes of isulating material for accomodation of accessories up to 16 A 250 V; main dimensions
DIN 41884:1971 Case 118 A 2 for semiconductor devices; main dimensions
DIN EN 60051-2:1991 Direct acting indicating analogue electrical measuring instruments and their accessories; part 2: special requirements for ammeters and voltmeters (IEC 60051-2:1984, edition 4); german version EN 60051-2:1989
DIN 42600-7:2013 Instrument transformers for 50 Hz, U<(Index)m> 0,72 kV to 52 kV - Part 7: Voltage Transformers U<(Index)m> to 12 kV - Small design, main dimensions, indoor type
DIN EN 61869-5:2012 Instrument transformers - Part 5: Additional requirements for capacitor voltage transformers (IEC 61869-5:2011); German version EN 61869-5:2011
DIN EN 61869-6:2017 Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers (IEC 61869-6:2016); German version EN 61869-6:2016
DIN 28131 Berichtigung 1:2018 Agitators and baffles for agitator vessels - Types, terms and main dimensions; Corrigendum 1
DIN 43862:1996 Electricity meters - Plug-in static electricity meters - Principal dimensions
DIN 8257-2:1969 Jewels for fine mechanics; watch jewels, balance jewels
DIN EN 60987:2010 Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems (IEC 60987:2007, modified); German version EN 60987:2009
DIN 58396-2:1977 Greases for optical instruments; minimum requirements
DIN IEC 61577-3:2012 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 3: Specific requirements for radon decay product measuring instruments (IEC 61577-3:2011)
DIN 58951-2:2003 Sterilization - Steam sterilizers for laboratory use - Part 2: Apparatus requirements, requirements on services and installation
DIN 43857-3:1974 Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for meter terminal cover for single-phase meters
DIN 43857-4:1974 Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for meter terminal cover for poly-phase meters
DIN IEC 60987:2008 Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems (IEC 60987:2007)
DIN 42600-8:2013 Instrument transformers for 50 Hz, U<(Index)m> 0,72 kV to 52 kV -Part 8: Current Transformers (support-type-insulators) U<(Index)m> = 12 kV and U<(Index)m> = 24 kV - Narrow design, main dimensions, indoor type
DIN 41814-2:1976 Cases for semiconductor devices; cases type 160 to 168, main dimensions
DIN 6063-2:2004 Threads, mainly for plastic containers - Part 2: Trapezoidal screw threads, dimensions
DIN 6063-2:2011-04 Threads, mainly for plastic containers - Part 2: Trapezoidal screw threads, dimensions
DIN 42600-5:2013 Instrument transformers for 50 Hz, U<(Index)m> 0,72 kV to 52 kV - Part 5: Current Transformers (support-type-insulator) U<(Index)m> 12 kV to 36 kV - Large design, main dimensions, indoor type
DIN 42600-3:2013 Instrument transformers for 50 Hz, U<(Index)m> 0,72 kV to 52 kV - Part 3: Voltage transformers U<(Index)m> 12 kV to 36 kV - Large design, main dimensions, indoor type
DIN EN 15330-2:2017 Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 2: Specification for needle-punched surfaces for tennis and multi-sport surfaces
DIN 42600-1:2013 Instrument transformers for 50 Hz, U<(Index)m> 0,72 kV to 52 kV - Part 1: Basic requirements
DIN EN 60051-6:1991 Direct acting indicating analogue electrical measuring instruments and their accessories; part 6: special requirements for ohmmeters (impedance meters) and conductance meters (IEC 60051-6:1984, edition 4); german version EN 60051-6:1989
DIN 6063-2:2011 Threads, mainly for plastic containers - Part 2: Trapezoidal screw threads, dimensions
DIN 43857-3:1974-12 Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for meter terminal cover for single-phase meters
DIN 43857-4:1974-12 Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for meter terminal cover for poly-phase meters
DIN 43857-1:1978-09 Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for single-phase meters
DIN 43857-2:1978-09 Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for poly-phase meters
DIN 43802-2:1991 Line scales and pointers for indicating electrical measuring instruments; general requirements

未注明发布机构, Table 2 Main Instruments

DIN IEC 1342:1996 Nuclear instrumentation — Multichannel! pulse height analyzers — Main characteristics, technical requirements and test methods
BS 2G 100-2:1962(2000) Specification for General requirements for electrical equipment and indicating instruments for aircraft — Part 2 : Environmental and Operating Conditions
BS 1646-2:1983(2011) Symbolic representation for process measurement control functions and instrumentation — Part 2 : Specification for additional basic requirements

International Electrotechnical Commission (IEC), Table 2 Main Instruments

IEC 61226:2009 Nuclear power plants - Instrumentation and control important to safety - Classification of instrumentation and control functions
IEC 61869-2:2012/ISH1:2022 Instrument transformers - Part 2: Additional requirements for current transformers
IEC 61869-2:2012 Instrument transformers - Part 2: Additional requirements for current transformers
IEC 61577-2:2000 Radiation Protection Instrumentation - Radon and Radon Decay Product Measuring Instruments - Part 2: Specific Requirements for Radon Measuring Instruments (Edition 2.0)
IEC 61342:1995 Nuclear instrumentation - Multichannel pulse height analyzers - Main characteristics, technical requirements and test methods
IEC 61869-6:2016 Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers
IEC 61869-1:2007 Instrument transformers - Part 1: General requirements
IEC 60044-2:2000 Instrument transformers - Part 2: Inductive voltage transformers
IEC 60044-2:2003 Instrument transformers - Part 2: Inductive voltage transformers
IEC 60044-1/AMD2:2002 Instrument transformers - Part 1: Current transformers; Amendment 2
IEC 60601-2-66:2012 Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
IEC 61869-4:2013/COR1:2014 Instrument transformers - Part 4: Additional requirements for combined transformers, Corrigendum 1
IEC 61869-4:2013 Instrument transformers - Part 4: Additional requirements for combined transformers
IEC 60709:2004 Nuclear power plants - Instrumentation and control systems important to safety - Separation
IEC 62342:2007 Nuclear power plants - Instrumentation and control systems important to safety - Management of ageing
IEC 61513:2001 Nuclear power plant - Instrumentation and control for systems important to safety; General requirements for systems
IEC 60051-2:2018 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 2: Special requirements for ammeters and voltmeters
IEC 60044-2/AMD2:2002 Instrument transformers - Part 2: Inductive voltage transformers; Amendment 2
IEC 61869-3:2011 Instrument transformers - Part 3: Additional requirements for inductive voltage transformers
IEC 62765-2:2019 Nuclear power plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - Part 2: Temperature sensors
IEC 61468:2021 Nuclear power plants - Instrumentation systems important to safety - In-core instrumentation: Characteristics and test methods of self-powered neutron detectors
IEC 61577-1:2000 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 1: General requirements
IEC 61577-2:2014 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 2: Specific requirements for 222 Rn and 220 Rn measuring instruments
IEC 60737:2010 Nuclear power plants - Instrumentation important to safety - Temperature sensors (in-core and primary cooling circuit) - Characteristics and test methods
IEC 61869-14:2018 Instrument transformers - Part 14: Additional requirements for current transformers for DC applications
IEC 61869-15:2018 Instrument transformers - Part 15: Additional requirements for voltage transformers for DC applications
IEC 61577-3:2002 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 3: Specific requirements for radon decay product measuring instruments
IEC 61577-3:2011 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 3: Specific requirements for radon decay product measuring instruments
IEC 60987:2007 Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems
IEC 61869-10:2017 Instrument transformers - Part 10: Additional requirements for low-power passive current transformers
IEC 62397:2022 Nuclear power plants - Instrumentation and control important to safety - Resistance temperature detectors
IEC 61869-11:2017 Instrument transformers - Part 11: Additional requirements for low power passive voltage transformers
IEC 60951-1:2009 Nuclear power plants - Instrumentation important to safety - Radiation monitoring system for accident and post-accident conditions - Part 1: General requirements
IEC 60051-2:1984 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2 : Special requirements for amperemeters and voltmeters
IEC 60269-2:1986 Low-voltage fuses. Part 2 : Supplementary requirements for fuses for use by authorized persons
IEC CISPR 16-1-1/COR2:2011 Specification for radio disturbance and immunity measuring apparatus and methods.Part 1-1: Radio disturbance and immunity measuring apparatus.Measuring apparatus CORRIGENDUM 2
IEC CISPR 16-4-2:2018 Specification for radio disturbance and immunity measuring apparatus and methods.Part 1-1: Radio disturbance and immunity measuring apparatus.Measuring apparatus CORRIGENDUM 2
IEC 60269-3/AMD1/COR2:2013 Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar application) - Examples of standardized systems of fuses A to F; Corrigendum 2

HU-MSZT, Table 2 Main Instruments

British Standards Institution (BSI), Table 2 Main Instruments

BS 8614:2017 Water meters. Additional requirements for meters with polymer main casings
BS EN 61869-6:2016 Instrument transformers. Additional general requirements for low-power instrument transformers
BS IEC 60737:2010 Nuclear power plants - Instrumentation important to safety Temperature sensors (in-core and primary coolant circuit) - Characteristics and test methods
BS SP 22-27:1950 Specifications for B.A. washers for aircraft purposes (primarily for instrument use)
BS SP 22-27:1950+A2:2011 Specification for B.A. Washers. For aircraft purposes (primarily for instrument use)
BS EN 61869-1:2010 Instrument transformers. General requirements
BS EN 61869-1:2009 Instrument transformers - General requirements
BS 9133 N001 to 003:1975 Detail specification for single turn low power non-wirewound rotary potentiometers - Spindle insulated from resistance element, spindle and panel sealed or container, spindle and panel sealed - Full assessment level
BS SP 22-27:1950+A3:2015 Specification for B.A. Washers. For aircraft purposes (primarily for instrument use)
BS EN 61869-3:2012 Instrument transformers. Additional requirements for inductive voltage transformers
BS EN 61869-3:2011 Instrument transformers. Additional requirements for inductive voltage transformers
17/30356584 DC BS EN 61577-2. Radiation protection instrumentation. Radon and radon dec ay product measuring instruments. Part 2. Specific requirements for <sup>222</sup>Rn and <sup>220</sup>Rn measuring instruments
BS EN 61869-2:2012 Instrument transformers. Additional requirements for current transformers
BS EN 61577-2:2017 Radiation protection instrumentation. Radon and radon decay product measuring instruments - Specific requirements for 222Rn and 220Rn measuring instruments
BS EN 61869-5:2011 Instrument transformers. Additional requirements for capacitor voltage transformers
BS EN 60709:2004 Nuclear power plants. Instrumentation and control systems important to safety. Separation
BS EN 60709:2010 Nuclear power plants - Instrumentation and control systems important to safety - Separation
BS EN 61577-3:2014 Radiation protection instrumentation. Radon and radon decay product measuring instruments - Specific requirements for radon decay product measuring instruments
BS EN 61869-4:2014 Instrument transformers. Additional requirements for combined transformers
BS EN IEC 61869-14:2019 Instrument transformers - Additional requirements for current transformers for DC applications
18/30382072 DC BS IEC 61468. Nuclear power plants. Instrumentation systems important to safety. In-core instrumentation. Characteristics and test methods of self-powered neutron detectors
19/30400212 DC BS IEC 61468. Nuclear power plants. Instrumentation systems important to safety. In-core instrumentation. Characteristics and test methods of self-powered neutron detectors
BS EN 62340:2010 Nuclear power plants - Instrumentation and control systems important to safety - Requirements for coping with common cause failure (CCF)
BS EN 62340:2008 Nuclear power plants. Instrumentation and control systems important to safety. Requirements for coping with common cause failure (CCF)
BS EN IEC 61869-11:2018 Instrument transformers - Additional requirements for low-power passive voltage transformers
20/30393452 DC BS EN ISO 8041-2. Human response to vibration. Measuring instrumentation. Part 2. Personal vibration exposure meters
BS IEC 60951-1:2009 Nuclear power plants - Instrumentation important to safety - Radiation monitoring for accident and post-accident conditions - General requirements
BS IEC 62706:2019 Radiation protection instrumentation. Recommended climatic, electromagnetic and mechanical performance requirements and methods of tests
BS 1646-2:1983 Symbolic representation for process measurement control functions and instrumentation - Specification for additional basic requirements
BS 6711-1:1986 Vocabulary relating to laboratory apparatus made essentially from glass, porcelain or vitreous silica. Names for items of apparatus
BS IEC 61468:2021 Nuclear power plants. Instrumentation systems important to safety. In-core instrumentation: Characteristics and test methods of self-powered neutron detectors
16/30336194 DC BS EN 60051-2. Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2. Special requirements for ammeters and voltmeters
BS EN IEC 61226:2021 Nuclear power plants. Instrumentation, control and electrical power systems important to safety. Categorization of functions and classification of systems
BS EN IEC 60051-6:2018 Direct acting indicating analogue electrical measuring instruments and their accessories - Special requirements for ohmmeters (impedance meters) and conductance meters
BS EN 60601-2-66:2013 Medical electrical equipment. Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
BS EN 60601-2-66:2015 Medical electrical equipment. Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
BS IEC 62765-2:2019 Nuclear powers plants. Instrumentation and control important to safety. Management of ageing of sensors and transmitters - Temperature sensors
BS EN 62765-1:2017 Nuclear powers plants. Instrumentation and control important to safety. Management of ageing of sensors and transmitters - Pressure transmitters
BS 89-2:1990 Direct acting indicating analogue electrical measuring instruments and their accessories - Specification for special requirements for ammeters and voltmeters
BS IEC 62397:2022 Tracked Changes. Nuclear power plants. Instrumentation and control important to safety. Resistance temperature detectors

Institute of Electrical and Electronics Engineers (IEEE), Table 2 Main Instruments

IEEE Std C57.13-2008 Requirements for instrument transformers
IEEE Std C57.13-1993 IEEE Standard Requirements for Instrument Transformers
ANSI/IEEE Std C57.13-1978 IEEE Standard Requirements for Instrument Transformers
IEEE Std C57.13-1978 IEEE Standard Requirements for Instrument Transformers
IEEE Std C57.13-1993(R2003) IEEE Standard Requirements for Instrument Transformers
IEEE PC57.13/D6, January 2015 IEEE Draft Standard Requirements for Instrument Transformers
IEEE PC57.13/D7, April 2015 IEEE Draft Standard Requirements for Instrument Transformers
IEEE Std 316-1971 IEEE Standard Requirements for Direct Current Instrument Shunts

U.S. Air Force, Table 2 Main Instruments

AIR FORCE MIL-L-27160 C NOTICE 4-1996 LIGHTING, INSTRUMENT, INTEGRAL, WHITE, GENERAL SPECIFICATION FOR
AIR FORCE MIL-L-27160 C REINST NOTICE 3-1996 LIGHTING, INSTRUMENT, INTEGRAL, WHITE, GENERAL SPECIFICATION FOR
AIR FORCE MIL-L-27160 C (1)-1975 LIGHTING, INSTRUMENT, INTEGRAL, WHITE, GENERAL SPECIFICATION FOR
AIR FORCE MIL-L-27160 C-1972 LIGHTING, INSTRUMENT, INTEGRAL, WHITE, GENERAL SPECIFICATION FOR
AIR FORCE MIL-T-8429 B NOTICE 1-1997 TESTER, LEAKAGE, DEMAND OXYGEN REGULATOR, TYPE MH-2
AIR FORCE MIL-T-8429 B-1983 TESTER, LEAKAGE, DEMAND OXYGEN REGULATOR, TYPE MH-2

RO-ASRO, Table 2 Main Instruments

STAS 11374/1-1980 COMPLEX GAUGES FOR INSCRIPTION OF RECTANGULAR PROFILE SPLINED SHAFTS AND HUBS Formes and main dimensions
STAS SR ISO 7858-2:1996 Measurement of water flow in closed conduits-Meters for cold potable water - Combination meters Part 2: Installation requirements
SR ISO 4064-2:1996 Measurement of water flow in closed conduits - Meters for cold potable water - Part 2: Installation requirements

Underwriters Laboratories (UL), Table 2 Main Instruments

UL 67 BULLETIN-2010 Summary of Topics This bulletin announces the availability of the Outline of Investigation for Electric Utility Meters, Subject 2735.
UL 758 CRD-2019 UL Standard for Appliance Wiring Material - Section / Paragraph Reference: Table 29.1@ Table 49.1 Subject: 20kV rated AWM (Edition 3: May 2@ 2014)

Association Francaise de Normalisation, Table 2 Main Instruments

NF C42-569-2*NF EN 61869-2:2013 Instrument transformers - Part 2 : additional requirements for current transformers
NF EN 61577-2:2017 Instrumentation pour la radioprotection - Instruments de mesure du radon et des descendants du radon - Partie 2 : exigences spécifiques pour les instruments de mesure du 222Rn et du 220Rn
NF C19-200*NF EN IEC 60987:2021 Nuclear power plants - Instrumentation and control important to safety - Hardware requirements
NF EN IEC 60987:2021 Centrales nucléaires de puissance - Systèmes d'instrumentation et de contrôle-commande importants pour la sûreté - Exigences applicables au matériel
NF C42-544-2/A2:2003 Instrument transformers - Part 2 : inductive voltage transformers.
NF EN 61513:2013 Centrales nucléaires de puissance - Instrumentation et contrôle-commande importants pour la sûreté - Exigences générales pour les systèmes
NF C42-569-1*NF EN 61869-1:2009 Instrument transformers - Part 1 : general requirements
NF C42-544-2:2000 Instrument transformers - Part 2 : inductive voltage transformers.
NF C74-393:1988 ELECTROMEDICAL EQUIPMENT. DIAGNOSTIC EQUIPMENT FROM EVOKED POTENTIALS (EP). PARTICULAR REQUIREMENTS - FOR SAFETY AND OPERATION.
NF C19-203*NF EN 60709:2010 Nuclear power plants - Instrumentation and control systems important to safety - Separation
NF EN 13312-2:2001 Biotechnologie - Critères de performance pour tuyauteries et instrumentaion - Partie 2 : raccords
NF X65-011-2*NF ISO 14934-2:2013 Fire tests - Calibration and use of heat flux meters - Part 2 : primary calibration methods
NF C19-205*NF EN 61226:2010 Nuclear power plants - Instrumentation and control important to safety - Classification of instrumentation and control functions
NF C42-100-2*NF EN IEC 60051-2:2021 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 2 : special requirements for ammeters and voltmeters
NF C42-569-4*NF EN 61869-4:2014 Instrument transformers - Part 4 : additional requirements for combined transformers
NF C19-206*NF EN 62340:2010 Nuclear power plants - Instrumentation and control systems important to safety - Requirements for coping with Common Cause Failure (CCF)
NF EN IEC 62465:2019 Centrales nucléaires de puissance - Instrumentation et contrôle-commande importants pour la sûreté - Gestion du vieillissement des systèmes de câbles électriques
NF C42-569-3*NF EN 61869-3:2012 Instrument transformers - Part 3 : additional requirements for inductive voltage transformers
NF C19-200:2009 Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems.
NF C19-200*NF EN 60987:2015 Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems
NF EN 62765-1:2017 Centrales nucléaires de puissance - Instrumentation et contrôle-commande importants pour la sûreté - Gestion du vieillissement des capteurs et des transmetteurs - Partie 1 : transmetteurs de pression
NF C42-544-6:2001 Instrument transformers - Part 6 : requirements for protective current transformers for transient performance.
NF EN 62808:2016 Centrales nucléaires de puissance - Systèmes d'instrumentation et de contrôle-commande importants pour la sûreté - Conception et qualification des appareils d'isolement
NF EN 62808/A1:2019 Centrales nucléaires de puissance - Systèmes d'instrumentation et de contrôle-commande importants pour la sûreté - Conception et qualification des appareils d'isolement
NF C74-349:2006 Medical electrical equipment - Part 2-27 : particular requirements for the safety, including essential performance, of electrocardiographic monitoring equipment.
NF C74-349*NF EN 60601-2-27:2014 Medical electrical equipment - Part 2-27 : particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment
NF A09-320-2/A1:2005 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2 : probes.
NF A09-320-2:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2 : probes.
NF P90-149-2*NF EN 15330-2:2017 Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 2 : specification for needle-punched surfaces for tennis and multi-sport surfaces
NF C97-205-2*NF EN 61947-2:2004 Electronic projection - Measurement and documentation of key performance criteria - Part 2 : variable resolution projectors.
NF E31-330-2*NF EN 12514-2:2000 Installations for oil supply systems for oil burners - Part 2 : safety requirements and tests : parts, valves, pipes, filters, oil de-aerators, meters.
NF EN IEC 61500:2019 Centrales nucléaires de puissance - Systèmes d'instrumentation et de contrôle-commande importants pour la sûreté - Communications de données dans les systèmes réalisant des fonctions de catégorie A
NF EN IEC/IEEE 62582-6:2021 Centrales nucléaires de puissance - Instrumentation et contrôle-commande importants pour la sûreté - Méthodes de surveillance de l'état des matériels électriques - Partie 6 : résistance d'isolement
NF EN 60880:2010 Centrales nucléaires de puissance - Instrumentation et contrôle-commande importants pour la sûreté - Aspects logiciels des systèmes programmés réalisant des fonctions de catégorie A
NF C63-210/A2:2002 Low-voltage fuses - Part 2 : supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application).
NF C63-210:1996 Low-voltage fuses. Part 2 : supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application).
NF C42-100-6*NF EN IEC 60051-6:2018 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 6 : special requirements for ohmmeters (impedance meters) and conductance meters
NF C73-832*NF EN 60335-2-32:2005 Household and similar electrical appliances - Safety - Part 2-32 : particular requirements for massage appliances

Korean Agency for Technology and Standards (KATS), Table 2 Main Instruments

KS C IEC 61869-2:2021 Instrument transformers — Part 2: Additional requirements for current transformers
KS C IEC 61577-2-2016(2022) Radiation protection instrumentation?Radon and radon decay product measuring instruments?Part 2: Specific requirements for 222Rn and 220Rn measuring instruments
KS C IEC 60044-2:2003 Instrument transformers－Part 2：Inductive voltage transfomers
KS C IEC 60476:2009 Nuclear instrumentation－Electrical measuring systems and instruments utilizing ionizing radiation sources－General aspects
KS C IEC 61869-4:2021 Instrument transformers — Part 4: Additional requirements for combined transformers
KS C IEC 61869-1:2013 Instrument transformers-Part 1:General requirements
KS B ISO 3511-2-2014(2019) Process measurement control functions and instrumentation — Symbolic representation — Part 2: Extension of basic requirements
KS B ISO 12857-2-2002(2017) Optics and optical instruments－Geodetic instruments－Field procedures for determining accuracy－Part 2：Theodolites
KS C IEC 61869-3-2014(2019) Instrument transformers — Part 3: Additional requirements for inductive voltage transformers
KS C IEC 61577-2-2016(2017) Radiation protection instrumentation?Radon and radon decay product measuring instruments?Part 2: Specific requirements for 222Rn and 220Rn measuring instruments
KS C IEC 61577-3-2014(2019) Radiation protection instrumentation — Radon and radon decay product measuring instruments — Part 3: Specific requirements for radon decay product measuring instruments
KS K ISO 8559-2:2019 Size designation of clothes — Part 2: Primary and secondary dimension indicators
KS C IEC 62397-2012(2022) Nuclear power plants－Instrumentation and control important to safety－Resistance temperature detectors
KS C IEC 61869-10:2021 Instrument transformers — Part 10: Additional requirements for low-power passive current transformers
KS C IEC 61869-11:2021 Instrument transformers — Part 11: Additional requirements for low-power passive voltage transformers
KS C IEC 60515-2012(2022) Nuclear power plants－Instrumentation important to safety－ Radiation detectors－Characteristics and test methods
KS C IEC 60515-2012(2017) Nuclear power plants－Instrumentation important to safety－ Radiation detectors－Characteristics and test methods
KS C IEC 62397-2012(2017) Nuclear power plants－Instrumentation and control important to safety－Resistance temperature detectors
KS C IEC 60044-6:2003 Instrument transformers－Part 6：Requirements for protective current transformers for transient performance
KS C IEC 60051-2-2013(2018) Direct acting indicating analogue electrical measuring instruments and their accessories－Part 2：Special requirements for ammeters and voltmeters
KS C IEC 60568:2009 In-core instrumentation for neutron fluence rate(flux) measurements in power reactor
KS B ISO 3511-2:2003 Process measurement control functions and instrumentation-Symbolic representation-Part 2:Extension of basic requirements
KS B ISO 3511-2:2014 Process measurement control functions and instrumentation — Symbolic representation — Part 2: Extension of basic requirements
KS C IEC 62765-1:2017 Nuclear powers plants — Instrumentation and control important to safety — Management of ageing of sensors and transmitters — Part 1: Pressure transmitters

KR-KS, Table 2 Main Instruments

KS C IEC 61869-2-2021 Instrument transformers — Part 2: Additional requirements for current transformers
KS C IEC 61869-4-2021 Instrument transformers — Part 4: Additional requirements for combined transformers
KS K ISO 8559-2-2019 Size designation of clothes — Part 2: Primary and secondary dimension indicators
KS C IEC 61869-10-2021 Instrument transformers — Part 10: Additional requirements for low-power passive current transformers
KS C IEC 61869-11-2021 Instrument transformers — Part 11: Additional requirements for low-power passive voltage transformers

工业和信息化部/国家能源局, Table 2 Main Instruments

JB/T 4136.2-2017 Instrument Lathes Part 2: Threaded Spindle End Dimensions

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Table 2 Main Instruments

GB 43067-2023 Safety technical requirements for instruments used in coal mines
GB/T 22264.2-2008(英文版) Fixed digital electric measuring instruments—Part 2: Special requirements for ammeters and voltmeters
GB/T 22264.2-2008 Mounted digital display electric measuring instruments.Part2:Special requirements for ammeters and voltmeters
GB/T 22264.2-2022 Mounted digital display electric measuring instruments—Part 2：Special requirements for ammeters and voltmeters
GB/T 22264.3-2008(英文版) Fixed digital electric measuring instruments—Part 3:Special requirements for wattmeters and varmeters
GB/T 2900.89-2012 Electrotechnical terminology.Electrical and electronic measurements and measuring instruments.Part 2:General terms relating to electrical measurements
GB/T 22264.5-2008(英文版) Fixed digital electric measuring instruments—Part 5:Special requirements for phase meters and power factor meters
GB/T 19661.2-2005 Safety requirements for nuclear instrumentations and systems-Part 2:Requirements of protection from radioactivity
GB/T 7676.2-1998 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2: Special requirements for ammeters and voltmeters
GB/T 22264.6-2009(英文版) Fixed digital electric measuring instruments—Part 6: Special requirements for insulation resistance meters
GB/T 13539.2-2002 Low-voltage fuses-Part 2: Supplementary requirements for fuses for use by authorized persons(fuses mainly for industrial application)
GB/T 42951-2023 General requirements and test methods for watch exterior parts made of hard materials for chronograph instruments

RU-GOST R, Table 2 Main Instruments

GOST 25851-1983 Radiometric instruments. Methods of main parameters measurement
GOST R IEC 61869-2-2015 Instrument transformers. Part 2. Additional requirements for current transformers
GOST 28217-1989 Basic environmental testing. Part 2. Tests. Test Ec: Drop and Topple, primarily for equipment-type specimens
GOST R 51747-2001 Microwave radio beacon instrument approach landing system for air vehicles. Main parameters and methods of measuring
GOST 28387-1989 Microwave radio beacon instrument approach landing system for air vehicls. Main parameters and measurement techniques
GOST R 8.654-2015 State system for ensuring the uniformity of measurements. Requirements for software of measuring instruments. Main principles
GOST R 8.654-2009 State system for ensuring the uniformity of measurements. Requirements for software of measuring instruments. Main principles
GOST R IEC 60987-2011 Nuclear power plants. Instrumentation and control systems important to safety. Hardware design requirements for computer-based systems
GOST IEC 61869-3-2012 Instrument transformers. Part 3. Additional requirements for inductive voltage transformers
GOST 25804.2-1983 Atomic power station technological processes control system equipment. Reliability requirements
GOST IEC 61947-2-2014 Electronic projection. Measurement and documentation of key performance criteria. Part 2. Variable resolution projectors
GOST 23706-1993 Direct acting indicating electrical measuring instruments and their accessories. Part 6. Special requirements for ohmmeters (impedance meters) and conductance meters
GOST 23706-1979 Ohmmeters. General specifications
GOST 30630.0.0-1999 Environment stabilty test methods for machines, instruments and other industrial products. General requirements

能源部, Table 2 Main Instruments

SY/T 5583-1993 Requirements for writing standards for petroleum instrumentation products

CZ-CSN, Table 2 Main Instruments

CSN 25 0991-1964 Round charts for recording instruments. Principal dimensions and workmanship
CSN 35 4701 Cast.2-1989 Low-voltage fuses. Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial applicatlon)
CSN IEC 51-2:1992 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2: Special requirements for ammeters and voltmeters

Danish Standards Foundation, Table 2 Main Instruments

DS/EN 60405:2007 Nuclear instrumentation - Constructional requirements and classification of radiometric gauges
DS/EN 62598:2013 Nuclear instrumentation - Constructional requirements and classification of radiometric gauges
DS/EN 60051-2:1996 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 2: Special requirements for ammeters and voltmeters
DS/EN 15330-2:2008 Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 2: Specification for needle-punched surfaces
DS/EN 12514-2:2000 Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests; Parts, valves, pipes, filters, oil de-aerators, meters
DS/EN 13312-2:2001 Biotechnology - Performance criteria for piping and instrumentation - Part 2: Couplings
DS/EN IEC 60051-2:2021 Direct acting indicating analogue electrical measuring instruments and their accessories – Part 2: Special requirements for ammeters and voltmeters
DS 2362-2:1994 Measuring equipment-Inclination measuring instruments-Part 2:Spirit level vials-Dimensions,requirements
DS/ISO 3511-2:1988 Process measurement control functions and instrumentation. Symbolic representation. Part 2: Extension of basic requirements
DS/EN 60051-6:1996 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters

European Committee for Electrotechnical Standardization（CENELEC）, Table 2 Main Instruments

EN 62598:2013 Nuclear instrumentation - Constructional requirements and classification of radiometric gauges
EN 60671:2011 Nuclear power plants - Instrumentation and control systems important to safety - Surveillance testing
EN IEC 60051-2:2021 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 2: Special requirements for ammeters and voltmeters
EN 61577-2:2017 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 2: Specific requirements for 222Rn and 220Rn measuring instruments
EN 61226:2010 Nuclear power plants - Instrumentation and control important to safety - Classification of instrumentation and control functions
EN 61869-3:2011 Instrument transformers - Part 3: Additional requirements for inductive voltage transformers
EN 60051-2:1989 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 2: Special Requirements for Ammeters and Voltmeters
EN 61947-2:2002 Electronic Projection - Measurement and Documentation of Key Performance Criteria Part 2: Variable Resolution Projectors
EN 60051-5:1989 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 5: Special Requirements for Phase Meters, Power Factor Meters and Synchroscopes

CENELEC - European Committee for Electrotechnical Standardization, Table 2 Main Instruments

EN 60405:2007 Nuclear instrumentation - Constructional requirements and classification of radiometric gauges
EN IEC 60051-6:2018 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters

ES-UNE, Table 2 Main Instruments

UNE-EN 62598:2013 Nuclear instrumentation - Constructional requirements and classification of radiometric gauges (Endorsed by AENOR in October of 2013.)
UNE-EN 61577-2:2017 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 2: Specific requirements for 222Rn and 220Rn measuring instruments (Endorsed by Asociación Española de Normalización in September of 2017.)
UNE-EN IEC 60051-2:2021 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 2: Special requirements for ammeters and voltmeters (Endorsed by Asociación Española de Normalización in June of 2021.)
UNE-EN ISO 20785-2:2020 Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 2: Characterization of instrument response (ISO 20785-2:2020) (Endorsed by Asociación Española de Normalización in September of 2020.)

American National Standards Institute （ANSI), Table 2 Main Instruments

ANSI/IEEE C57.13:2008 Standard Requirements for Instrument Transformers

Military Standard of the People's Republic of China-General Armament Department, Table 2 Main Instruments

GJB 9639-2019 Manned spacecraft instrument display requirements

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Table 2 Main Instruments

IEEE 316-1971 STANDARD REQUIREMENTS FOR DIRECT CURRENT INSTRUMENT SHUNTS
IEEE C57.13-1978 STANDARD REQUIREMENTS FOR INSTRUMENT TRANSFORMERS (R 1986)

Group Standards of the People's Republic of China, Table 2 Main Instruments

T/CFLP 0003-2017 The technical requirements of active safety protection instrument and system for freigh
T/CASME 451-2023 Technical requirements for instrumentation automation measurement and control equipment and systems

Professional Standard - Commodity Inspection, Table 2 Main Instruments

SN/T 1843.2-2006 Rules for the inspection of instruments for import and export. Part 2: Alternating current static watt-hour meters

National Metrological Verification Regulations of the People's Republic of China, Table 2 Main Instruments

JJG(轻工) 83-1991 Verification Regulations for BMP-2 Quartz Clock Instrument Accuracy Calibrator

Indonesia Standards, Table 2 Main Instruments

SNI IEC 60405:2008 Nuclear instrumentation - Constructional and classification spesification of radiometric measurement apparatus
SNI 18-7103-2005 Nuclear power plants - Important instrumentation and control system for safety - Classification
SNI IEC 62053-21:2011
SNI IEC 60051-3:2009 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 3: Special requirements for wattmeters and varmeters

United States Navy, Table 2 Main Instruments

NAVY MIL-V-24578 B-1988 VALVES, GLOBE, PRESSURE INSTRUMENT, STEM TEST CONNECTION, UNION END

Society of Automotive Engineers (SAE), Table 2 Main Instruments

SAE AMS3819C-2007 Cloths, Cleaning For Aircraft Primary and Secondary Structural Surfaces

Professional Standard - Energy, Table 2 Main Instruments

NB/T 20318-2014 Pressure transmitter important to safety in nuclear power plants
NB/T 20197.2-2014 Reliability and aging detection for instrumentation and control equipment in nuclear power plants.Part 2:Fuses

VN-TCVN, Table 2 Main Instruments

TCVN 7697-2-2007 Instrument transformers.Part 2 : Inductive voltage transformers

ZA-SANS, Table 2 Main Instruments

SANS 60044-2:2003 Instrument transformers Part 2: Inductive voltage transformers

Canadian Standards Association (CSA), Table 2 Main Instruments

CSA C60044-2-07-2007 Transformateurs de mesure ?Partie 2: Transformateurs inductifs de tension [Superseded: CSA C13-M83-CAN3, CSA C13-M83-CAN3]
CSA N290.5-06-2006 Exigences relatives aux syst鑝es d抋limentation 閘ectrique et en air d抜nstrumentation des centrales nucl閍ires CANDU Deuxi鑝e Edition
CSA C60044-6-07-CAN/CSA-2007 Transformateurs de mesure ?Partie 6 : Prescriptions concernant les transformateurs de courant pour protection pour la r閜onse en r間ime transitoire premi鑢e 閐ition,
CSA C13-M83-CAN3-1983 Instrument Transformers Third Edition; General Instruction No 1-2 [: CSA C60044-1-07-CAN/CSA, CSA C60044-2-07-CAN/CSA]

Japanese Industrial Standards Committee (JISC), Table 2 Main Instruments

JIS F 0807:1999 General requirements for environmental tests of control and instrumentation equipment for marine use
JIS C 1736-2:2009 Instrument transformers for metering service -- Part 2: Measuring instruments used in transaction or certification
JIS C 1216-2:2009 Alternating-current watt-hour meters (for connection through instrument transformer) -- Part 2: Measuring instruments used in transaction or certification
JIS C 1216-2:2017 Alternating-current watt-hour meters (for connection through instrument transformer) -- Part 2: Measuring instruments used in transaction or certification
JIS C 1216-2 AMD 1:2014 Alternating-current watt-hour meters (for connection through instrument transformer) -- Part 2: Measuring instruments used in transaction or certification (Amendment 1)
JIS C 1102-2:1997 Direct acting indicating analogue electrical measuring instruments and their accessories Part 2: Special requirements for ammeters and voltmeters
JIS C 1263-2:2009 Var-hour meters -- Part 2: Measuring instruments used in transaction or certification
JIS C 1283-2:2017 Maximum demand meter -- Part 2: Measuring instruments used in transaction or certification
JIS B 7505-2:2022 Aneroid pressure gauges -- Part 2: Measuring instruments used in transaction or certification
JIS C 8269-2:2000 Low-voltage fuses -- Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)
JIS C 1263-2 AMD 1:2014 Var-hour meters -- Part 2: Measuring instruments used in transaction or certification (Amendment 1)
JIS C 1271-2:2017 Alternating-current static meters for active energy -- Classes 1 and 2 -- Part 2: Measuring instruments used in transaction or certification
JIS C 1211-2:2009 Alternating-current watt-hour meters (for direct connection) -- Part 2: Measuring instruments used in transaction or certification
JIS C 1273-2:2017 Alternating-current static meters for reactive energy -- Part 2: Measuring instruments used in transaction or certification
JIS C 1102-7:1997 Direct acting indicating analogue electrical measuring instruments and their accessories Part 7: Special requirements for multi-function instruments
JIS B 7611-2:2005 Nonautomatic weighing instruments -- Metrological and technical requirements and tests -- Part 2: Legal measuring instruments
JIS B 7611-2:2009 Non-automatic weighing instruments -- Metrological and technical requirements and tests -- Part 2: Measuring instruments used in transaction or certification
JIS B 7611-2:2015 Non-automatic weighing instruments -- Metrological and technical requirements and tests -- Part 2: Measuring instruments used in transaction or certification

国家市场监督管理总局、中国国家标准化管理委员会, Table 2 Main Instruments

GB/T 40216-2021 Data description of intelligent instruments—General requirements of properties database
GB/T 13163.2-2021 Radiation protection instrumentation—Radon and radon decay product measuring instruments—Part 2：Specific requirements for 222Rn and 220Rn measuring instruments

CU-NC, Table 2 Main Instruments

NC 97-36-1988 Packing and Packaging. Glass Container Finishings. Determmation of its Main Characteristics

Aerospace Industries Association/ANSI Aerospace Standards, Table 2 Main Instruments

AIA/NAS NAS 458-1953 Vendor Parts; Contractor Requirements for Drawings, Data Lists, and Specification of, Specification for (Rev. 2)

IN-BIS, Table 2 Main Instruments

IS 9249 Pt.2-1982
IS 13654-1993 Automotive vehicles. Instrument systems. Electrical speedometer. Performance requirements
IS 12754 Pt.2-1989
IS 1248 Pt.2-1983

BE-NBN, Table 2 Main Instruments

NBN-EN 60051-2-1994 Direct acting indicating analogue electrical measuring instruments and their accessories Part 2: Special requirements for ammeters and voltmeters
NBN-EN 60051-5-1994 Direct acting indicating analogue electrical measuring instruments and their accessories Part 5: Special requirements for phase meters, power factor meters and synchroscopes
NBN-EN 60051-3-1994 Direct acting indicating analogue electrical measuring instruments and their accessories Part 3: Special requirements for wattmeters and varmeters

Professional Standard - Navy, Table 2 Main Instruments

HJB 379.2-2007 Technical Requirements for Repair of General Nautical Instruments Part 2: Ship Meteorological Instruments

API - American Petroleum Institute, Table 2 Main Instruments

API MPMS 4.5-2011 Manual of Petroleum Measurement Standards Chapter 4.5 Master Meter Provers (THIRD EDITION; ERTA: June 2014)
API MPMS 4.5-1988 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 5 - Master-Meter Provers (First Edition; Supercedes 1101@ 2531@ 2533@ 2534)

Lithuanian Standards Office , Table 2 Main Instruments

LST EN IEC 60051-2:2021 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 2: Special requirements for ammeters and voltmeters (IEC 60051-2:2018)
LST EN 15330-2-2008 Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 2: Specification for needle-punched surfaces
LST EN 12514-2-2001 Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests - Parts, valves, pipes, filters, oil de-aerators, meters
LST EN 13312-2-2002 Biotechnology - Performance criteria for piping and instrumentation - Part 2: Couplings
LST EN 60269-2+A1-2002 Low-voltage fuses -- Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) (IEC 60269-2:1986)
LST EN 60051-2-2000 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2: Special requirements for ammeters and voltmeters (IEC 60051-2:1984, 4th edition)
LST EN ISO 15004-2:2007 Ophthalmic instruments - Fundamental requirements and test methods - Part 2: Light hazard protection (ISO 15004-2:2007)

Professional Standard - Aviation, Table 2 Main Instruments

HB 7285-1996 Minimum performance requirements for civil aircraft pipeline pressure instruments
HB 7289-1996 Requirements for cockpit instruments, displays and related controllers of civil transport aircraft
HB 7504.13-1997 Data Requirements for Flight Simulator Design and Performance Flight Instruments
HB 7101-1994 Minimum performance requirements for civil aircraft fuel, oil and hydraulic pressure instruments

International Organization for Standardization (ISO), Table 2 Main Instruments

ISO 14934-2:2006 Fire tests - Calibration and use of heat flux meters - Part 2: Primary calibration methods
ISO 14934-2:2013 Fire tests - Calibration and use of heat flux meters - Part 2: Primary calibration methods
ISO 18684:2020 Timekeeping instruments — Watch external parts made of hard material — General requirements and test methods
ISO 3511-2:1984 Process measurement control functions and instrumentation; Symbolic representation; Part 2 : Extension of basic requirements
ISO 8655-2:2002/cor 1:2008 Piston-operated volumetric apparatus - Part 2: Piston pipettes; Technical Corrigendum 1

Standard Association of Australia （SAA）, Table 2 Main Instruments

AS 60044.2:2007 Instrument transformers - Inductive voltage transformers(IEC 60044-2:Ed.1.2 (2003) MOD)

European Committee for Standardization (CEN), Table 2 Main Instruments

EN 13182:2002 Ventilation for buildings - Instrumentation requirements for air velocity measurements in ventilated spaces

ES-AENOR, Table 2 Main Instruments

UNE-EN 60051-2:1993

Professional Standard - Earthquake, Table 2 Main Instruments

DB/T 29.2-2008 Technical requirements of instruments in network for earthquake monitoring.Geoelectrical meters.Part 2: Meter for geoelectrical field
DB/T 31.2-2008 Technical requirements of instruments in network for earthquake monitoring.The instrument for crustal deformation observation.Part 2: Strainmeter
DB/T 32.2-2008 Technical requirements of instruments in network for earthquake monitoring.Underground fluid observation instruments.Part 2: Temperature indicator
DB/T 30.2-2008 Technical requirements of instruments in network for earthquake monitoring.Geomagnetic meter.Part 2: Proton vector magnetometer
DB/T 21-2007 Technical requirements of instruments in network for earthquake monitoring.The description of common technical parmneter and test method

SE-SIS, Table 2 Main Instruments

SIS SS-IEC 965:1991 Nuclear instrumentation — Supplementary control points for reactor shutdown without access to the main control room
SIS SEN 06 01 15-1971 Coordination ofrated values for watthour meters and associated fuses. Requirements and type-tests
SIS SEN 06 01 05-1974 Electrical meters, Maximum demand indicators, Class 1.0 General requirements and type testing

NATO - North Atlantic Treaty Organization, Table 2 Main Instruments

STANAG 7139-2001 Aircraft Engine Controls Switches Displays Indicators Gauges and Arrangements (ED 2)

YU-JUS, Table 2 Main Instruments

JUS M.A0.100-1979 Process measurement control junctions and instrumentation - Symbolic representation. Basic reguirements
JUS L.G1.005-1994 Measuring equipment for basic electrical quantities - Direct acting indicating analoque electrical measuring instruments and their accessories - Part 5: Special requirements for phase meters, power factor meters and synhroscopes
JUS L.G1.002-1994 Direct acting indicating analogue electrical measuring instruments and their accessories - Special reqirements for ammeters and voltmeters

International Telecommunication Union (ITU), Table 2 Main Instruments

ITU-T H.120 ERRATUM 1-2013 Codecs for videoconferencing using primary digital group transmission; Erratum 1
ITU-T O.150 CORR 1 FRENCH-2002 General Requirements for Instrumentation for Performance Measurements on Digital Transmission Equipment Corrigendum 1 Study Group 4
ITU-T O.150 CORR 1 SPANISH-2002 General Requirements for Instrumentation for Performance Measurements on Digital Transmission Equipment Corrigendum 1 Study Group 4

AENOR, Table 2 Main Instruments

UNE-EN 15330-2:2009 Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 2: Specification for needle-punched surfaces
UNE 1096-2:1991 PROCESS MEASUREMENT CONTROL FUNCTIONS AND INSTRUMENTATION. SYMBOLIC REPRESENTATION. PART 2: EXTENSION OF BASIC REQUIREMENTS.
UNE-EN 12514-2:2001 Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests - Parts, valves, pipes, filters, oil de-aerators, meters.
UNE-EN ISO 15004-2:2007 Ophthalmic instruments - Fundamental requirements and test methods - Part 2: Light hazard protection (ISO 15004-2:2007)

Association of German Mechanical Engineers, Table 2 Main Instruments

VDI/VDE 2650 Blatt 7-2006 Requirements regarding self-monitoring and diagnosis in field instrumentation - Actuators

Occupational Health Standard of the People's Republic of China, Table 2 Main Instruments

GBZ/T 200.2-2007 Reference individuals for use in radiation protection.Part 2:Masses of main organs and tissues

FI-SFS, Table 2 Main Instruments

SFS 8094-1986 In case of interpretation disputes the Finnish text applies

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Table 2 Main Instruments

GB/T 7676.2-2017 Direct acting indicating analogue electrical measuring instruments and their accessories—Part 2：Special requirements for ammeters and voltmeters

TH-TISI, Table 2 Main Instruments

TIS 2110-2002 Low.voltage fuses.part 2: supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)
TIS 2111-2002 Low.voltage fuses.part 2-1: supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)

American Society for Testing and Materials (ASTM), Table 2 Main Instruments

ASTM D6104-97 Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off
ASTM D6104-97(2003) Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off

CH-SNV, Table 2 Main Instruments

SN EN ISO 20785-2:2021 Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 2: Characterization of instrument response (ISO 20785-2:2020)