ZH
RU
ES

Table 2 Main Instruments

Table 2 Main Instruments, Total:417 items.

In the international standard classification, Table 2 Main Instruments involves: Installations in buildings, Electricity. Magnetism. Electrical and magnetic measurements, Thermodynamics and temperature measurements, Nuclear energy engineering, Metrology and measurement in general, Paper products, Radiation measurements, Resistors, Environmental testing, Radiation protection, Materials for aerospace construction, Industrial automation systems, Linear and angular measurements, Transformers. Reactors, Ground service and maintenance equipment, Electrical accessories, Shipbuilding and marine structures in general, Medical equipment, On-board equipment and instruments, Measurement of fluid flow, Acoustics and acoustic measurements, Protection against fire, Applications of information technology, Ventilators. Fans. Air-conditioners, Equipment for the chemical industry, Audio, video and audiovisual engineering, Vocabularies, Analytical chemistry, Sports equipment and facilities, Biology. Botany. Zoology, Microbiology, Graphical symbols, Equipment for petroleum and natural gas industries, Burners. Boilers, Screw threads, Bottles. Pots. Jars, Non-destructive testing, Aids for disabled or handicapped persons, Photography, Horology, Electrical wires and cables, Electronic components in general, Electromechanical components for electronic and telecommunications equipment, Power transmission and distribution networks, Mechanical testing, Alarm and warning systems, Electrical equipment for working in special conditions, Aircraft and space vehicles in general, Vibrations, shock and vibration measurements, Fluid power systems, Geology. Meteorology. Hydrology, Cinematography, Domestic safety, Miscellaneous domestic and commercial equipment, Technical product documentation, Quality, Switchgear and controlgear, Kitchen equipment.

PL-PKN, Table 2 Main Instruments

PN G03352-1972 Driliing geophysies Ends of heads ins?ruments intratelluric Principal parame?ers
PN E06513-1987 Hlectricity meters Meters with maximum demand indicators Requirements and tests
PN G02316-1991 Measuring meters for hydrogeology. Electrical water level meters with recorders. Types, principal parameters and technical requirements
PN G02317-1991 Measuring meters for hydrogeology. Mechanical water level meters with boosters. Types, principal parameters and technical requirements
PN-EN IEC 60051-2-2021-09 E Direct acting indicating analogue electrical measuring instruments and their accessories -- Part 2: Special requirements for ammeters and voltmeters (IEC 60051-2:2018)
PN-EN ISO 20785-2-2021-01 E Dosimetry for exposures to cosmic radiation in civilian aircraft -- Part 2: Characterization of instrument response (ISO 20785-2:2020)
PN E06501-05-1992 Direct acting indicating analogue electrical measuring instruments and their accessories Special requirements for phase meters, power factor meters and synchroscopes

German Institute for Standardization, Table 2 Main Instruments

DIN 43859:1977 Watthour meters for instrument-transformer connection; main dimensions for three-phase meters
DIN 43859:1977-06 Watthour meters for instrument-transformer connection; main dimensions for three-phase meters
DIN 42600-2:2013 Instrument transformers for 50 Hz, U<(Index)m> 0,72 kV to 52 kV - Part 2: Current transformers U<(Index)m> = 0,72 kV and U<(Index)m> = 1,2 kV - Main dimensions
DIN 42600-7:1986 Instrument transformers for 50 Hz, U<(Index)m> to 52 kV; voltage transformers U<(Index)m> 12 kV; narrow design, main dimensions, indoor type
DIN 42600-9:1985 Instruments transformers for 50 Hz, U<(Index)m> 0,6 to 52 kV; voltage transformers U<(Index)m> 12 and 24 kV; narrow design, main dimensions, indoor type
DIN 43857-1:1978 Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for single-phase meters
DIN 43857-2:1978 Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for poly-phase meters
DIN 42600-2:1983 Instrument transformers for 50 Hz, U<(Index)m> 0,6 to 52 kV; current transformers U<(Index)m>=0,8 kV; main dimensions
DIN EN 60405:2007 Nuclear instrumentation - Constructional requirements and classification of radiometric gauges (IEC 60405:2003, modified); German version EN 60405:2007
DIN 42600-5:1977 Instrument transformers for 50 Hz, HSV 0,6 to 52 kV; current transformers (support-type-insulator) HSV 12 to 36 kV, large design, main dimensions, indoor type
DIN 43857-5:1998 Watthour meters in moulded case without instrument transformers up to 60 A rated maximum current - Part 5: Principal dimensions for terminal cover
DIN EN 61869-2:2013 Instrument transformers - Part 2: Additional requirements for current transformers (IEC 61869-2:2012); German version EN 61869-2:2012
DIN 42600-4:1977 Instrument transformers for 50 Hz, HSV 0,6 to 52 kV; currenttransformers (support-typ-insulator), HSV 12 kV, small design, main dimensions, indoor type
DIN EN 61869-3:2012 Instrument transformers - Part 3: Additional requirements for inductive voltage transformers (IEC 61869-3:2011); German version EN 61869-3:2011
DIN EN 13312-2:2001-07 Biotechnology - Performance criteria for piping and instrumentation - Part 2: Couplings; German version EN 13312-2:2001
DIN 49073:2007 Metal boxes and boxes of insulating material for recessed mounting for accomodation of accessories up to 16 A 250 V and socket-outlets according to DIN 49445, DIN 49447 and DIN EN 60309-2 (VDE 0623-20) up to 32 A 690 V - Main dimensions
DIN 42600-8:1983 Instrument transformers for 50 Hz, U<(Index)m> 0,6 to 52 kV; current transformers (support-type-insulators) U<(Index)m> 12 and 24 kV; narrow design, main dimensions, indoor type
DIN EN 61869-2 Berichtigung 1:2014 Instrument transformers - Part 2: Additional requirements for current transformers (IEC 61869-2:2012); German version EN 61869-2:2012, Corrigendum to DIN EN 61869-2 (VDE 0414-9-2):2013-07
DIN EN 60051-2:1991 Direct acting indicating analogue electrical measuring instruments and their accessories; part 2: special requirements for ammeters and voltmeters (IEC 60051-2:1984, edition 4); german version EN 60051-2:1989
DIN 42600-7:2013 Instrument transformers for 50 Hz, U<(Index)m> 0,72 kV to 52 kV - Part 7: Voltage Transformers U<(Index)m> to 12 kV - Small design, main dimensions, indoor type
DIN 28131 Berichtigung 1:2018 Agitators and baffles for agitator vessels - Types, terms and main dimensions; Corrigendum 1
DIN 43862:1996 Electricity meters - Plug-in static electricity meters - Principal dimensions
DIN EN 60987:2010 Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems (IEC 60987:2007, modified); German version EN 60987:2009
DIN EN 61869-6:2017 Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers (IEC 61869-6:2016); German version EN 61869-6:2016
DIN IEC 61577-3:2012 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 3: Specific requirements for radon decay product measuring instruments (IEC 61577-3:2011)
DIN 43857-3:1974 Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for meter terminal cover for single-phase meters
DIN 43857-4:1974 Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for meter terminal cover for poly-phase meters
DIN IEC 60987:2008 Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems (IEC 60987:2007)
DIN 42600-8:2013 Instrument transformers for 50 Hz, U<(Index)m> 0,72 kV to 52 kV -Part 8: Current Transformers (support-type-insulators) U<(Index)m> = 12 kV and U<(Index)m> = 24 kV - Narrow design, main dimensions, indoor type
DIN 6063-2:2004 Threads, mainly for plastic containers - Part 2: Trapezoidal screw threads, dimensions
DIN 6063-2:2011-04 Threads, mainly for plastic containers - Part 2: Trapezoidal screw threads, dimensions
DIN EN 60051-6:1991 Direct acting indicating analogue electrical measuring instruments and their accessories; part 6: special requirements for ohmmeters (impedance meters) and conductance meters (IEC 60051-6:1984, edition 4); german version EN 60051-6:1989
DIN EN 15330-2:2017 Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 2: Specification for needle-punched surfaces for tennis and multi-sport surfaces
DIN 42600-5:2013 Instrument transformers for 50 Hz, U<(Index)m> 0,72 kV to 52 kV - Part 5: Current Transformers (support-type-insulator) U<(Index)m> 12 kV to 36 kV - Large design, main dimensions, indoor type
DIN 42600-3:2013 Instrument transformers for 50 Hz, U<(Index)m> 0,72 kV to 52 kV - Part 3: Voltage transformers U<(Index)m> 12 kV to 36 kV - Large design, main dimensions, indoor type
DIN 42600-1:2013 Instrument transformers for 50 Hz, U<(Index)m> 0,72 kV to 52 kV - Part 1: Basic requirements
DIN 43857-1:1978-09 Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for single-phase meters
DIN 43857-2:1978-09 Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for poly-phase meters
DIN 6063-2:2011 Threads, mainly for plastic containers - Part 2: Trapezoidal screw threads, dimensions
DIN EN 60051-5:1991 Direct acting indicating analogue electrical measuring instruments and their accessories; part 5: special requirements for phase meters, power factor meters and synchroscopes (IEC 60051-5:1985, edition 4); german version EN 60051-5:1989
DIN 43857-3:1974-12 Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for meter terminal cover for single-phase meters
DIN 43857-4:1974-12 Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for meter terminal cover for poly-phase meters
DIN 42600-4:2013 Instrument transformers for 50 Hz, U<(Index)m> 0,72 kV to 52 kV - Part 4: Current Transformers (support-type-insulator) U<(Index)m> = 12 kV - Small design, main dimensions, indoor type
DIN EN 60051-4:1991 Direct acting indicating analogue electrical measuring instruments and their accessories; part 4: special requirements for frequency meters (IEC 60051-4:1984, edition 4); german version EN 60051-4:1989
DIN EN 60987:2015 Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems (IEC 60987:2007 + A1:2013); German version EN 60987:2015
DIN EN 13182:2002-12 Ventilation for buildings - Instrumentation requirements for air velocity measurements in ventilated spaces (including corrigendum AC:2002); German version EN 13182:2002 + AC:2002
DIN VDE 0636-2:2011 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to J (IEC 60269-2:2010, modified); German version HD 60269-2:2010
DIN VDE 0636-2:2008 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to I (IEC 60269-2:2006, modified); German version HD 60269-2:2007
DIN EN 61577-3:2015 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 3: Specific requirements for radon decay product measuring instruments (IEC 61577-3:2011, modified); German version EN 61577-3:2014
DIN 42600-9:2013 Instrument transformers for 50 Hz, U<(Index)m> 0,72 kV to 52 kV - Part 9: Voltage Transformers U<(Index)m> = 12 kV and U<(Index)m> = 24 kV - Narrow design, main dimensions, indoor type
DIN 43857-5:1998-05 Watthour meters in moulded case without instrument transformers up to 60 A rated maximum current - Part 5: Principal dimensions for terminal cover
DIN VDE 0636-2:2014 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K (IEC 60269-2:2013, modified); German version HD 60269-2:2013
DIN EN 15330-2:2017-09 Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 2: Specification for needle-punched surfaces for tennis and multi-sport surfaces; German version EN 15330-2:2017

未注明发布机构, Table 2 Main Instruments

DIN IEC 1342:1996 Nuclear instrumentation — Multichannel! pulse height analyzers — Main characteristics, technical requirements and test methods
BS 1646-2:1983(2011) Symbolic representation for process measurement control functions and instrumentation — Part 2 : Specification for additional basic requirements
BS 2G 100-2:1962(2000) Specification for General requirements for electrical equipment and indicating instruments for aircraft — Part 2 : Environmental and Operating Conditions
BS ISO 7858-2:2000 Measurement of water flow in closed conduits - Combination meters for cold potable water - Part 2: Installation requirements
BS G 209:1970(2000) General requirements for electrical equipment and indicating instruments for aircraft . — Part 1 : Identification, declarations and construction ; — Part 2 : Environmental and operating conditions ; — Part 2 : Section 2 .

British Standards Institution (BSI), Table 2 Main Instruments

BS 8614:2017 Water meters. Additional requirements for meters with polymer main casings
BS EN 61869-6:2016 Instrument transformers. Additional general requirements for low-power instrument transformers
BS IEC 60737:2010 Nuclear power plants - Instrumentation important to safety Temperature sensors (in-core and primary coolant circuit) - Characteristics and test methods
BS 9133 N001 to 003:1975 Detail specification for single turn low power non-wirewound rotary potentiometers - Spindle insulated from resistance element, spindle and panel sealed or container, spindle and panel sealed - Full assessment level
BS EN 61869-2:2012 Instrument transformers. Additional requirements for current transformers
17/30356584 DC BS EN 61577-2. Radiation protection instrumentation. Radon and radon dec ay product measuring instruments. Part 2. Specific requirements for <sup>222</sup>Rn and <sup>220</sup>Rn measuring instruments
BS EN 61577-2:2017 Radiation protection instrumentation. Radon and radon decay product measuring instruments - Specific requirements for 222Rn and 220Rn measuring instruments
BS EN 61869-4:2014 Instrument transformers. Additional requirements for combined transformers
BS EN 61577-3:2014 Radiation protection instrumentation. Radon and radon decay product measuring instruments - Specific requirements for radon decay product measuring instruments
18/30382072 DC BS IEC 61468. Nuclear power plants. Instrumentation systems important to safety. In-core instrumentation. Characteristics and test methods of self-powered neutron detectors
19/30400212 DC BS IEC 61468. Nuclear power plants. Instrumentation systems important to safety. In-core instrumentation. Characteristics and test methods of self-powered neutron detectors
BS EN IEC 61869-14:2019 Instrument transformers - Additional requirements for current transformers for DC applications
BS EN IEC 61869-11:2018 Instrument transformers - Additional requirements for low-power passive voltage transformers
BS EN 62340:2010 Nuclear power plants - Instrumentation and control systems important to safety - Requirements for coping with common cause failure (CCF)
BS EN 62340:2008 Nuclear power plants. Instrumentation and control systems important to safety. Requirements for coping with common cause failure (CCF)
20/30393452 DC BS EN ISO 8041-2. Human response to vibration. Measuring instrumentation. Part 2. Personal vibration exposure meters
BS IEC 60951-1:2009 Nuclear power plants - Instrumentation important to safety - Radiation monitoring for accident and post-accident conditions - General requirements
BS 6711-1:1986 Vocabulary relating to laboratory apparatus made essentially from glass, porcelain or vitreous silica. Names for items of apparatus
BS IEC 61468:2021 Nuclear power plants. Instrumentation systems important to safety. In-core instrumentation: Characteristics and test methods of self-powered neutron detectors
BS IEC 62706:2019 Radiation protection instrumentation. Recommended climatic, electromagnetic and mechanical performance requirements and methods of tests
BS 1646-2:1983 Symbolic representation for process measurement control functions and instrumentation - Specification for additional basic requirements
16/30336194 DC BS EN 60051-2. Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2. Special requirements for ammeters and voltmeters
BS EN IEC 60051-6:2018 Direct acting indicating analogue electrical measuring instruments and their accessories - Special requirements for ohmmeters (impedance meters) and conductance meters
BS EN 60601-2-66:2013 Medical electrical equipment. Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
BS EN 60601-2-66:2015 Medical electrical equipment. Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
BS IEC 62765-1:2015 Nuclear powers plants. Instrumentation and control important to safety. Management of ageing of sensors and transmitters. Pressure transmitters
19/30378796 DC BS EN ISO 20785-2. Dosimetry for exposures to cosmic radiation in civilian aircraft. Part 2. Characterization of instrument response
BS 89-2:1990 Direct acting indicating analogue electrical measuring instruments and their accessories - Specification for special requirements for ammeters and voltmeters
BS 1646-1:1979 Symbolic representation for process measurement control functions and instrumentation - Basic requirements
BS IEC 62887:2018 Nuclear power plants. Instrumentation systems important to safety. Pressure transmitters: Characteristics and test methods
BS IEC 61559-1:2009 Radiation protection instrumentation in nuclear facilities - Centralized systems for continuous monitoring of radiation and/or levels of radioactivity - General requirements
BS 4675-2:1978 Mechanical vibration in rotating machinery - Requirements for instruments for measuring vibration severity
BS PD ISO/TS 18684:2015 Timekeeping instruments. Watch external parts made of hard materials. General requirements and test methods
21/30405935 DC BS IEC 62397. Nuclear power plants. Instrumentation and control systems important to safety. Resistance temperature detectors
BS IEC 60988:2009 Nuclear power plants - Instrumentation important to safety - Acoustic monitoring systems for detection of loose parts: Characteristics, design criteria and operational procedures
BS IEC 60951-3:2009 Nuclear power plants - Instrumentation important to safety - Radiation monitoring for accident and post-accident conditions - Equipment for continuous high range area gamma monitoring

AT-ON, Table 2 Main Instruments

OVE/ONORM E 2792-1999 Electrical installations - House connection feeders, mains (service connection), meter boards
OENORM EN 17694-1-2021 Hydrometry - Performance requirements and test procedures for water monitoring equipment - Devices for the determination of flow Part 1: Open channel instrumentation

Korean Agency for Technology and Standards (KATS), Table 2 Main Instruments

KS C IEC 61869-2:2021 Instrument transformers — Part 2: Additional requirements for current transformers
KS C IEC 61577-2-2016(2022) Radiation protection instrumentation?Radon and radon decay product measuring instruments?Part 2: Specific requirements for 222Rn and 220Rn measuring instruments
KS C IEC 60476:2009 Nuclear instrumentation－Electrical measuring systems and instruments utilizing ionizing radiation sources－General aspects
KS C IEC 61869-4:2021 Instrument transformers — Part 4: Additional requirements for combined transformers
KS C IEC 61869-3-2014(2019) Instrument transformers — Part 3: Additional requirements for inductive voltage transformers
KS C IEC 61577-2-2016(2017) Radiation protection instrumentation?Radon and radon decay product measuring instruments?Part 2: Specific requirements for 222Rn and 220Rn measuring instruments
KS B ISO 3511-2-2014(2019) Process measurement control functions and instrumentation — Symbolic representation — Part 2: Extension of basic requirements
KS C IEC 62397-2012(2022) Nuclear power plants－Instrumentation and control important to safety－Resistance temperature detectors
KS C IEC 61577-3-2014(2019) Radiation protection instrumentation — Radon and radon decay product measuring instruments — Part 3: Specific requirements for radon decay product measuring instruments
KS C IEC 61869-10:2021 Instrument transformers — Part 10: Additional requirements for low-power passive current transformers
KS C IEC 61869-11:2021 Instrument transformers — Part 11: Additional requirements for low-power passive voltage transformers
KS C IEC 62397-2012(2017) Nuclear power plants－Instrumentation and control important to safety－Resistance temperature detectors
KS C IEC 60044-6:2003 Instrument transformers－Part 6：Requirements for protective current transformers for transient performance
KS B ISO 3511-2:2003 Process measurement control functions and instrumentation-Symbolic representation-Part 2:Extension of basic requirements
KS B ISO 3511-2:2014 Process measurement control functions and instrumentation — Symbolic representation — Part 2: Extension of basic requirements
KS C IEC 60051-2-2013(2018) Direct acting indicating analogue electrical measuring instruments and their accessories－Part 2：Special requirements for ammeters and voltmeters
KS C IEC 60601-2-66-2017(2022) Medical electrical equipment — Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
KS C IEC 60601-2-66:2017 Medical electrical equipment — Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
KS C IEC 62765-1-2017(2022) Nuclear powers plants — Instrumentation and control important to safety — Management of ageing of sensors and transmitters — Part 1: Pressure transmitters
KS C IEC 60988:2012 Nuclear power plants-Instrumentation important to safety- Acoustic monitoring systems for detection of loose parts: characteristics, design criteria and operational procedures
KS C IEC 60269-2:2019 Low-voltage fuses — Part 2: Supplementary requirements for fuses for use by authorized persons(fuses mainly for industrial application) — Examples of standardized systems of fuses A to K
KS C IEC 61094-2-2003(2008) Measurement microphones－Part 2：Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique
KS C IEC 60051-5-2013(2018) Direct acting indicating analogue electrical measuring instruments and their accessories－Part 5：Special requirements for phase meters, power factor meters and synchroscopes
KS C IEC 60335-2-56:2004 Household and similar electrical appliances-Safety-Part 2-56:Particular requirements for projectors and similar appliances
KS C IEC 60335-2-56:2013 Household and similar electrical appliances-Safety-Part 2-56:Particular requirements for projectors and similar appliances
KS C IEC 60269-2:2021 Low-voltage fuses — Part 2: Supplementary requirements for fuses for use by authorized persons(fuses mainly for industrial application) — Examples of standardized systems of fuses A to K
KS C IEC 61207-2-2014(2019) Expression of performance of gas analyzers — Part 2: Oxygen in gas(utilizing high-temperature electrochemical sensors)

KR-KS, Table 2 Main Instruments

KS C IEC 61869-2-2021 Instrument transformers — Part 2: Additional requirements for current transformers
KS C IEC 61869-4-2021 Instrument transformers — Part 4: Additional requirements for combined transformers
KS C IEC 61869-10-2021 Instrument transformers — Part 10: Additional requirements for low-power passive current transformers
KS C IEC 61869-11-2021 Instrument transformers — Part 11: Additional requirements for low-power passive voltage transformers
KS C IEC 60601-2-66-2017 Medical electrical equipment — Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
KS C IEC 60269-2-2019 Low-voltage fuses — Part 2: Supplementary requirements for fuses for use by authorized persons(fuses mainly for industrial application) — Examples of standardized systems of fuses A to K
KS C IEC 62765-1-2017 Nuclear powers plants — Instrumentation and control important to safety — Management of ageing of sensors and transmitters — Part 1: Pressure transmitters
KS C IEC 60269-2-2021 Low-voltage fuses — Part 2: Supplementary requirements for fuses for use by authorized persons(fuses mainly for industrial application) — Examples of standardized systems of fuses A to K

Association Francaise de Normalisation, Table 2 Main Instruments

NF EN 61577-2:2017 Instrumentation pour la radioprotection - Instruments de mesure du radon et des descendants du radon - Partie 2 : exigences spécifiques pour les instruments de mesure du 222Rn et du 220Rn
NF C42-569-2*NF EN 61869-2:2013 Instrument transformers - Part 2 : additional requirements for current transformers
NF C19-200*NF EN IEC 60987:2021 Nuclear power plants - Instrumentation and control important to safety - Hardware requirements
NF EN 61513:2013 Centrales nucléaires de puissance - Instrumentation et contrôle-commande importants pour la sûreté - Exigences générales pour les systèmes
NF EN IEC 60987:2021 Centrales nucléaires de puissance - Systèmes d'instrumentation et de contrôle-commande importants pour la sûreté - Exigences applicables au matériel
NF C74-393:1988 ELECTROMEDICAL EQUIPMENT. DIAGNOSTIC EQUIPMENT FROM EVOKED POTENTIALS (EP). PARTICULAR REQUIREMENTS - FOR SAFETY AND OPERATION.
NF C19-203*NF EN 60709:2010 Nuclear power plants - Instrumentation and control systems important to safety - Separation
NF EN 13312-2:2001 Biotechnologie - Critères de performance pour tuyauteries et instrumentaion - Partie 2 : raccords
NF C19-206*NF EN 62340:2010 Nuclear power plants - Instrumentation and control systems important to safety - Requirements for coping with Common Cause Failure (CCF)
NF X65-011-2*NF ISO 14934-2:2013 Fire tests - Calibration and use of heat flux meters - Part 2 : primary calibration methods
NF EN IEC 62465:2019 Centrales nucléaires de puissance - Instrumentation et contrôle-commande importants pour la sûreté - Gestion du vieillissement des systèmes de câbles électriques
NF C42-569-4*NF EN 61869-4:2014 Instrument transformers - Part 4 : additional requirements for combined transformers
NF C19-200:2009 Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems.
NF C19-200*NF EN 60987:2015 Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems
NF C19-205*NF EN 61226:2010 Nuclear power plants - Instrumentation and control important to safety - Classification of instrumentation and control functions
NF C42-100-2*NF EN IEC 60051-2:2021 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 2 : special requirements for ammeters and voltmeters
NF EN 62765-1:2017 Centrales nucléaires de puissance - Instrumentation et contrôle-commande importants pour la sûreté - Gestion du vieillissement des capteurs et des transmetteurs - Partie 1 : transmetteurs de pression
NF EN 62808:2016 Centrales nucléaires de puissance - Systèmes d'instrumentation et de contrôle-commande importants pour la sûreté - Conception et qualification des appareils d'isolement
NF EN 62808/A1:2019 Centrales nucléaires de puissance - Systèmes d'instrumentation et de contrôle-commande importants pour la sûreté - Conception et qualification des appareils d'isolement
NF C74-349:2006 Medical electrical equipment - Part 2-27 : particular requirements for the safety, including essential performance, of electrocardiographic monitoring equipment.
NF C74-349*NF EN 60601-2-27:2014 Medical electrical equipment - Part 2-27 : particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment
NF EN IEC 61500:2019 Centrales nucléaires de puissance - Systèmes d'instrumentation et de contrôle-commande importants pour la sûreté - Communications de données dans les systèmes réalisant des fonctions de catégorie A
NF EN 60880:2010 Centrales nucléaires de puissance - Instrumentation et contrôle-commande importants pour la sûreté - Aspects logiciels des systèmes programmés réalisant des fonctions de catégorie A
NF P90-149-2*NF EN 15330-2:2017 Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 2 : specification for needle-punched surfaces for tennis and multi-sport surfaces
NF C63-210/A2:2002 Low-voltage fuses - Part 2 : supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application).
NF C63-210:1996 Low-voltage fuses. Part 2 : supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application).
NF A09-320-2/A1:2005 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2 : probes.
NF A09-320-2:2010 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2 : probes.
NF C97-205-2*NF EN 61947-2:2004 Electronic projection - Measurement and documentation of key performance criteria - Part 2 : variable resolution projectors.
NF E31-330-2*NF EN 12514-2:2000 Installations for oil supply systems for oil burners - Part 2 : safety requirements and tests : parts, valves, pipes, filters, oil de-aerators, meters.
NF C73-832*NF EN 60335-2-32:2005 Household and similar electrical appliances - Safety - Part 2-32 : particular requirements for massage appliances
NF EN ISO 20785-2:2020 Dosimétrie pour l'exposition au rayonnement cosmique à bord d'un avion civil - Partie 2 : caractérisation de la réponse des instruments
NF C19-765-1*NF EN 62765-1:2017 Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - Part 1 : Pressure transmitters
NF C42-100-6*NF EN IEC 60051-6:2018 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 6 : special requirements for ohmmeters (impedance meters) and conductance meters
NF C74-388*NF EN 80601-2-30:2011 Medical electrical equipment - Part 2-30 : particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
NF C23-541-2:2005 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - Part 2 : performance requirements for apparatus for the detection of combustible gases.
NF EN IEC 60051-6:2018 Appareils mesureurs électriques indicateurs analogiques à action directe et leurs accessoires - Partie 6 : exigences particulières pour les ohmmètres (les impédancemètres) et les conductancemètres
NF C42-100-3*NF EN IEC 60051-3:2021 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 3 : special requirements for wattmeters and varmeters
NF EN IEC 62566-2:2020 Centrales nucléaires de puissance - Instrumentation et contrôle-commande importants pour la sûreté - Développement des circuits intégrés programmés en HDL - Partie 2 : circuits intégrés programmés en HDL pour les systèmes réalisant des fon...
NF S95-190:2012 Medical electrical equipment - Part 2-55 : particular requirements for the basic safety and essential performance of respiratory gas monitors.
NF C74-321*NF EN 60601-2-20:2010 Medical electrical equipment - Part 2-20 : particular requirements for basic safety and essential performance of infant transport incubators
NF EN 15330-2:2017 Sols sportifs - Surfaces en gazon synthétique et surfaces en textile aiguilleté principalement destinées à l'usage en extérieur - Partie 2 : spécifications relatives aux surfaces en textile aiguilleté destinées à la pratique du tennis ou à u...
NF EN IEC 62138:2019 Centrales nucléaires de puissance - Systèmes d'instrumentation et de contrôle-commande importants pour la sûreté - Aspects logiciels des systèmes informatisés réalisant des fonctions de catégorie B ou C
NF C73-856*NF EN 60335-2-56:2004 Household and similar electrical appliances - Safety - Part 2-56 : particular requirements for projectors and similar appliances
NF C42-100-5*NF EN IEC 60051-5:2018 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 5 : special requirements for phase meters, power factor meters and synchroscopes
NF C74-213/A11*NF EN 60601-2-29/A11:2012 Medical electrical equipment - Part 2-29 : particular requirements for the basic safety and essential performance of radiotherapy simulators
NF C60-200-2:2012 Low-voltage fuses - Part 2 : supplementary requirements for fuses for use by authorised persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to J.
NF C63-213:2003 Low-voltage fuses - Part 2-1 : supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to VI : examples of types of standardized fuses.
NF EN 61094-2:2009 Électroacoustique - Microphones de mesure - Partie 2 : méthode primaire pour l'étalonnage en pression des microphones étalons de laboratoire par la méthode de réciprocité
NF EN 61094-2/A1:2022 Électroacoustique - Microphones de mesure - Partie 2 : méthode primaire pour l'étalonnage en pression des microphones étalons de laboratoire par la méthode de la réciprocité
NF C60-200-2:2014 Fusibles basse tension - Partie 2 : exigences supplémentaires pour les fusibles destinés à être utilisés par des personnes habilitées (fusibles pour usages essentiellement industriels) - Exemples de systèmes de fusibles normalisés A à K
NF EN 60335-2-56/A2:2015 Appareils électrodomestiques et analogues - Sécurité - Partie 2-56 : règles particulières pour les projecteurs d'images et appareils analogues
NF EN 60335-2-56:2004 Appareils électrodomestiques et analogues - Sécurité - Partie 2-56 : règles particulières pour les projecteurs d'images et appareils analogues
NF EN 60335-2-56/A1:2008 Appareils électrodomestiques et analogues - Sécurité - Partie 2-56 : règles particulières pour les projecteurs d'images et appareils analogues
NF C44-053-21/A1*NF EN 62053-21/A1:2017 Electricity metering equipment (a.c.) - Particular requirements - Part 21 : static meters for active energy (classes 1 and 2)

HU-MSZT, Table 2 Main Instruments

CZ-CSN, Table 2 Main Instruments

CSN 25 0991-1964 Round charts for recording instruments. Principal dimensions and workmanship
CSN 35 4701 Cast.2-1989 Low-voltage fuses. Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial applicatlon)
CSN 35 4701 Cast.2-1-1989 Low-voltage fuses. Part 2-1: Supplementary requirements for fuses for use by authcrized persons (fuses mainly for industrial application). Sections I to III
CSN 70 4102-1987 Laboratory glassware - Measuring cylinders - Part 2: Graduated measuring cylinders with ring marks at main points
CSN EN 60335-2-15-2005
CSN 35 4701-2-1 Z1-1999
CSN 70 4102-2-1995 Laboratory glassware-Measuring cylinders-Part 2:Graduated measruring cylinders with ring marks at main points

Institute of Electrical and Electronics Engineers (IEEE), Table 2 Main Instruments

IEEE Std C57.13-1993 IEEE Standard Requirements for Instrument Transformers
ANSI/IEEE Std C57.13-1978 IEEE Standard Requirements for Instrument Transformers
IEEE Std C57.13-1978 IEEE Standard Requirements for Instrument Transformers
IEEE Std C57.13-1993(R2003) IEEE Standard Requirements for Instrument Transformers
IEEE PC57.13/D6, January 2015 IEEE Draft Standard Requirements for Instrument Transformers
IEEE PC57.13/D7, April 2015 IEEE Draft Standard Requirements for Instrument Transformers
IEEE Std 316-1971 IEEE Standard Requirements for Direct Current Instrument Shunts
IEEE Std C57.13.5-2009 IEEE Standard for Performance and Test Requirements for Instrument Transformers of a Nominal System Voltage of 115 kV and Above

American National Standards Institute （ANSI), Table 2 Main Instruments

ANSI/IEEE C57.13:2008 Standard Requirements for Instrument Transformers
ANSI/IEEE C57.13.5:2009 Standard of Performance and Test Requirements for Instrument Transformers of a Nominal System Voltage of 115 kV and Above

International Electrotechnical Commission (IEC), Table 2 Main Instruments

IEC 61577-2:2000 Radiation Protection Instrumentation - Radon and Radon Decay Product Measuring Instruments - Part 2: Specific Requirements for Radon Measuring Instruments (Edition 2.0)
IEC 61869-2:2012/ISH1:2022 Instrument transformers - Part 2: Additional requirements for current transformers
IEC 61869-2:2012 Instrument transformers - Part 2: Additional requirements for current transformers
IEC 61869-6:2016 Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers
IEC 61513:2001 Nuclear power plant - Instrumentation and control for systems important to safety; General requirements for systems
IEC 61869-4:2013/COR1:2014 Instrument transformers - Part 4: Additional requirements for combined transformers, Corrigendum 1
IEC 61869-4:2013 Instrument transformers - Part 4: Additional requirements for combined transformers
IEC 60601-2-66:2012 Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
IEC 60709:2004 Nuclear power plants - Instrumentation and control systems important to safety - Separation
IEC 62342:2007 Nuclear power plants - Instrumentation and control systems important to safety - Management of ageing
IEC 62765-2:2019 Nuclear power plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - Part 2: Temperature sensors
IEC 60051-2:2018 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 2: Special requirements for ammeters and voltmeters
IEC 61577-3:2002 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 3: Specific requirements for radon decay product measuring instruments
IEC 61577-3:2011 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 3: Specific requirements for radon decay product measuring instruments
IEC 61468:2021 Nuclear power plants - Instrumentation systems important to safety - In-core instrumentation: Characteristics and test methods of self-powered neutron detectors
IEC 60987:2007 Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems
IEC 61577-1:2000 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 1: General requirements
IEC 61869-14:2018 Instrument transformers - Part 14: Additional requirements for current transformers for DC applications
IEC 61869-15:2018 Instrument transformers - Part 15: Additional requirements for voltage transformers for DC applications
IEC 61577-2:2014 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 2: Specific requirements for 222 Rn and 220 Rn measuring instruments
IEC 61869-10:2017 Instrument transformers - Part 10: Additional requirements for low-power passive current transformers
IEC 62397:2022 Nuclear power plants - Instrumentation and control important to safety - Resistance temperature detectors
IEC 60269-2:1986 Low-voltage fuses. Part 2 : Supplementary requirements for fuses for use by authorized persons
IEC 61869-11:2017 Instrument transformers - Part 11: Additional requirements for low power passive voltage transformers
IEC 60051-2:1984 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2 : Special requirements for amperemeters and voltmeters
IEC 60737:2010 Nuclear power plants - Instrumentation important to safety - Temperature sensors (in-core and primary cooling circuit) - Characteristics and test methods
IEC CISPR 16-1-1/COR2:2011 Specification for radio disturbance and immunity measuring apparatus and methods.Part 1-1: Radio disturbance and immunity measuring apparatus.Measuring apparatus CORRIGENDUM 2
IEC CISPR 16-4-2:2018 Specification for radio disturbance and immunity measuring apparatus and methods.Part 1-1: Radio disturbance and immunity measuring apparatus.Measuring apparatus CORRIGENDUM 2
IEC 60269-3/AMD1/COR2:2013 Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar application) - Examples of standardized systems of fuses A to F; Corrigendum 2
IEC TR 61838:2001 Nuclear power plants - Instrumentation and control functions important for safety - Use of probabilistic safety assessment for the classification
IEC 60269-3:2010/AMD1:2013/COR2:2013 Corrigendum 2 to Amendment 1 - Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F
IEC 60601-2-66:2015 Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
IEC 60051-3:2018 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 3: Special requirements for wattmeters and varmeters
IEC 60988:2009 Nuclear power plants - Instrumentation important to safety - Acoustic monitoring systems for detection og loose parts: characteristics, design criteria and operational procedures
IEC 60269-2:2006 Low-voltage fuses - Part 2 : Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to I
IEC 60335-2-56:2002 Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances
IEC 60335-2-56:2003 Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances
IEC 60335-2-56:2002+AMD1:2008 CSV Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances
IEC 60269-2-1/AMD2:2002 Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application); Sections I to VI: Examples of types of standardized fuses; Amendment 2
IEC 60051-5:1985 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 5: Special requirements for phase meters, power factor meters and synchroscopes.
IEC 60051-5:2017 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 5: Special requirements for phase meters, power factor meters and synchroscopes
IEC 60269-2-1:2000 Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to V: Examples of types of standardized fuses
IEC 60269-2-1:1998 Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application); Sections I to V: Examples of types of standardized fuses
IEC 60269-2:2010 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to J
IEC 60269-2:2013+AMD1:2016 CSV Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
IEC 60269-3-1/AMD2:2001 Low-voltage fuses - Part 3-1: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications); Sections I to IV; Amendment 2
IEC 60269-3/AMD1/COR1:2013 Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar application) - Examples of standardized systems of fuses A to F; Corrigendum 1
IEC 60951-2:2009 Nuclear power plants - Instrumentation important to safety - Radiation monitoring system for accident and post-accident conditions - Part 2: Equipment for continuous off-line monitoring of radioactivity in gaseous effluents and ventilation air

RU-GOST R, Table 2 Main Instruments

GOST R IEC 61869-2-2015 Instrument transformers. Part 2. Additional requirements for current transformers
GOST 28217-1989 Basic environmental testing. Part 2. Tests. Test Ec: Drop and Topple, primarily for equipment-type specimens
GOST 28387-1989 Microwave radio beacon instrument approach landing system for air vehicls. Main parameters and measurement techniques
GOST R 51747-2001 Microwave radio beacon instrument approach landing system for air vehicles. Main parameters and methods of measuring
GOST R 8.654-2015 State system for ensuring the uniformity of measurements. Requirements for software of measuring instruments. Main principles
GOST R 8.654-2009 State system for ensuring the uniformity of measurements. Requirements for software of measuring instruments. Main principles
GOST R IEC 60987-2011 Nuclear power plants. Instrumentation and control systems important to safety. Hardware design requirements for computer-based systems
GOST IEC 61869-3-2012 Instrument transformers. Part 3. Additional requirements for inductive voltage transformers
GOST IEC 61947-2-2014 Electronic projection. Measurement and documentation of key performance criteria. Part 2. Variable resolution projectors
GOST 23706-1993 Direct acting indicating electrical measuring instruments and their accessories. Part 6. Special requirements for ohmmeters (impedance meters) and conductance meters
GOST 23706-1979 Ohmmeters. General specifications
GOST 23586-1996 Electrical wiring of radio-electronic equipment and devices. Technical requirements for wire harnesses and their mounting
GOST 23586-1979 Mounting of electric and radioelectronic equipment and instruments. Technical requirements for braids and their fastening
GOST 30630.0.0-1999 Environment stabilty test methods for machines, instruments and other industrial products. General requirements
GOST 8.037-1981 State system for ensuring the uniformity of measurements. State primary standard and state verifications schedule for noise power spectral density measuring instruments within the frequency range fro 1,0 up to 37,5 ghz
GOST 10374-1993 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 7. Special requirements for multi-function instruments
GOST 10374-1982 Multi-scale portable measuring instruments. General technical specifications
GOST R IEC 61241-1-2-1999 Electrical apparatus for use in the presence of combustible dust. Past 1:2. Electrical apparatus protected by enclosures and surface temperature limitation. Selection, installation and maintenance
GOST 25804.4-1983 Atomic power station technological processes control system equipmet. General design-constructional requirements
GOST R 8.778-2011 State system for ensuring the uniformity of measurements. Measuring instruments of heat energy hot-water heating systems. Metrological assurance. Main principles
GOST 25804.6-1983 Atomic power station technological processes control system equipment. Evaluation methods of meeting reliability requirements
GOST 23587-1996 Electrical wiring of radio-electronic equipment and devices. Technical requirements for termination of hookup wires and wire strand attachment
GOST 23587-1979 Mounting of electric radioelectronic equipment and instruments. Technical requirements for hookup wires termination and conductors fastening
GOST 30546.1-1998 General requirements for machines, instruments and other industrial products and calculation methods for their complex structures as to seismic stability
GOST 25804.8-1983 Atomic power station technological processes control system equipment. Evaluation methods of meeting general design-constructional requirements

Danish Standards Foundation, Table 2 Main Instruments

DS/EN 60405:2007 Nuclear instrumentation - Constructional requirements and classification of radiometric gauges
DS/EN 62598:2013 Nuclear instrumentation - Constructional requirements and classification of radiometric gauges
DS/EN 60051-2:1996 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 2: Special requirements for ammeters and voltmeters
DS/EN 15330-2:2008 Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 2: Specification for needle-punched surfaces
DS/EN 13312-2:2001 Biotechnology - Performance criteria for piping and instrumentation - Part 2: Couplings
DS/ISO 3511-2:1988 Process measurement control functions and instrumentation. Symbolic representation. Part 2: Extension of basic requirements
DS/EN 12514-2:2000 Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests; Parts, valves, pipes, filters, oil de-aerators, meters
DS/EN IEC 60051-2:2021 Direct acting indicating analogue electrical measuring instruments and their accessories – Part 2: Special requirements for ammeters and voltmeters
DS/EN 60051-6:1996 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters
DS/HD 60269-2:2010 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to J
DS/HD 60269-2:2013 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K

European Committee for Electrotechnical Standardization（CENELEC）, Table 2 Main Instruments

EN 62598:2013 Nuclear instrumentation - Constructional requirements and classification of radiometric gauges
EN 60671:2011 Nuclear power plants - Instrumentation and control systems important to safety - Surveillance testing
EN IEC 60051-2:2021 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 2: Special requirements for ammeters and voltmeters
EN 61869-3:2011 Instrument transformers - Part 3: Additional requirements for inductive voltage transformers
EN 61226:2010 Nuclear power plants - Instrumentation and control important to safety - Classification of instrumentation and control functions
EN 61577-2:2017 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 2: Specific requirements for 222Rn and 220Rn measuring instruments
EN 60051-2:1989 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 2: Special Requirements for Ammeters and Voltmeters
EN 61947-2:2002 Electronic Projection - Measurement and Documentation of Key Performance Criteria Part 2: Variable Resolution Projectors
EN 60051-5:1989 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 5: Special Requirements for Phase Meters, Power Factor Meters and Synchroscopes
EN 62765-1:2017 Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - Part 1: Pressure transmitters
EN 60051-6:1989 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 6: Special Requirements for ohmmeters (Impedance Meters) and Conductance Meters
EN IEC 60051-3:2021 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 3: Special requirements for wattmeters and varmeters
HD 60269-2-2010 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to J (Remains Current)
HD 60269-2-2013 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
HD 60269-2:2013/A1:2022 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
HD 60269-2:2013 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K

CENELEC - European Committee for Electrotechnical Standardization, Table 2 Main Instruments

EN 60405:2007 Nuclear instrumentation - Constructional requirements and classification of radiometric gauges
EN IEC 60051-6:2018 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters
EN 60335-2-56:1991 Safety of Household and Similar Electrical Appliances Part 2: Particular Requirements for Projectors and Similar Appliances
EN 60335-2-56:1997 Safety of Household and Similar Electrical Appliances Part 2: Particular Requirements for Projectors and Similar Appliances
EN 60269-2:1995 Low-Voltage Fuses - Part 2: Supplementary Requirements for Fuses for Use by Authorized Persons (Fuses Mainly for Industrial Application) (Incorporates Amendments A1: 1998 and A2: 2002)

ES-UNE, Table 2 Main Instruments

UNE-EN 62598:2013 Nuclear instrumentation - Constructional requirements and classification of radiometric gauges (Endorsed by AENOR in October of 2013.)
UNE-EN 61577-2:2017 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 2: Specific requirements for 222Rn and 220Rn measuring instruments (Endorsed by Asociación Española de Normalización in September of 2017.)
UNE-EN IEC 60051-2:2021 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 2: Special requirements for ammeters and voltmeters (Endorsed by Asociación Española de Normalización in June of 2021.)
UNE-EN IEC 60051-6:2018 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters (Endorsed by Asociación Española de Normalización in May of 2018.)
UNE-EN 15330-2:2018 Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 2: Specification for needle-punched surfaces for tennis and multi-sport surfaces
UNE-EN 62765-1:2017 Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - Part 1: Pressure transmitters (Endorsed by Asociación Española de Normalización in November of 2017.)
UNE-EN IEC 60051-3:2021 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 3: Special requirements for wattmeters and varmeters (Endorsed by Asociación Española de Normalización in June of 2021.)

RO-ASRO, Table 2 Main Instruments

STAS 11374/1-1980 COMPLEX GAUGES FOR INSCRIPTION OF RECTANGULAR PROFILE SPLINED SHAFTS AND HUBS Formes and main dimensions
STAS SR ISO 7858-2:1996 Measurement of water flow in closed conduits-Meters for cold potable water - Combination meters Part 2: Installation requirements
SR ISO 4064-2:1996 Measurement of water flow in closed conduits - Meters for cold potable water - Part 2: Installation requirements
SR ISO 4064-2/A1:1995 Measurement of water flow in ciosed conduits - Meters for coid potable water. Part 2: Installation requirements Addendum 1: Paralel and multiple meter operation

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Table 2 Main Instruments

IEEE 316-1971 STANDARD REQUIREMENTS FOR DIRECT CURRENT INSTRUMENT SHUNTS
IEEE C57.13-1978 STANDARD REQUIREMENTS FOR INSTRUMENT TRANSFORMERS (R 1986)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Table 2 Main Instruments

GB/T 22264.2-2008(英文版) Fixed digital electric measuring instruments—Part 2: Special requirements for ammeters and voltmeters
GB/T 22264.2-2008 Mounted digital display electric measuring instruments.Part2:Special requirements for ammeters and voltmeters
GB/T 22264.2-2022 Mounted digital display electric measuring instruments—Part 2：Special requirements for ammeters and voltmeters
GB/T 22264.3-2008(英文版) Fixed digital electric measuring instruments—Part 3:Special requirements for wattmeters and varmeters
GB/T 2900.89-2012 Electrotechnical terminology.Electrical and electronic measurements and measuring instruments.Part 2:General terms relating to electrical measurements
GB/T 22264.5-2008(英文版) Fixed digital electric measuring instruments—Part 5:Special requirements for phase meters and power factor meters
GB/T 13539.2-2002 Low-voltage fuses-Part 2: Supplementary requirements for fuses for use by authorized persons(fuses mainly for industrial application)
GB/T 22264.6-2009(英文版) Fixed digital electric measuring instruments—Part 6: Special requirements for insulation resistance meters
GB/T 7676.2-1998 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2: Special requirements for ammeters and voltmeters
GB/T 42951-2023 General requirements and test methods for watch exterior parts made of hard materials for chronograph instruments
GB/T 13632.2-2006 Measurements for monitoring adequate cooling within the core of pressurized light water reactors - Part 2: Instrumentation requirements during cold shutdown
GB/T 16896.2-2010 Digital recorders for measurements in high-voltage impulse tests.Part 2:Software requirement
GB/T 13539.2-2015 Low-voltage fuses.Part 2:Supplementary requirements for fuses for use by authorized persons(fuses mainly for industrial application).Examples of standardized systems of fuses A to K
GB/T 13539.2-2008 Low-voltage fuses-Part 2: Supplementary requirements for fuses used by professionals (fuses mainly used in industry) Examples of standardized fuse systems A to I
GB/T 13539.6-2002 Low-voltage fuses Part 2: Supplementary requirements for fuses by authorized persons(fuses mainly for industrial application) Sections 1 to 5: Examples of standardized fuses
GB/T 19661.2-2015 Safety requirements for nuclear instruments and systems - Part 2: Structural requirements and classification for radiometric meters
GB/T 7676.5-1998 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 5: Special requirements for phase meters, power factor meters and synchroscopes

Indonesia Standards, Table 2 Main Instruments

SNI IEC 60405:2008 Nuclear instrumentation - Constructional and classification spesification of radiometric measurement apparatus
SNI 18-7103-2005 Nuclear power plants - Important instrumentation and control system for safety - Classification
SNI IEC 60051-3:2009 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 3: Special requirements for wattmeters and varmeters

United States Navy, Table 2 Main Instruments

NAVY MIL-V-24578 B-1988 VALVES, GLOBE, PRESSURE INSTRUMENT, STEM TEST CONNECTION, UNION END

Professional Standard - Machinery, Table 2 Main Instruments

JB/T 6183-2014 Rules for the preparation of reliability requirements and assessment methods of instrumentation
JB/T 6183-1992 Code for reliability requirement and compilation of examination method for instrumentation

Japanese Industrial Standards Committee (JISC), Table 2 Main Instruments

JIS F 0807:1999 General requirements for environmental tests of control and instrumentation equipment for marine use
JIS C 1102-2:1997 Direct acting indicating analogue electrical measuring instruments and their accessories Part 2: Special requirements for ammeters and voltmeters
JIS C 8269-2:2000 Low-voltage fuses -- Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)
JIS B 7505-2:2022 Aneroid pressure gauges -- Part 2: Measuring instruments used in transaction or certification
JIS C 1102-7:1997 Direct acting indicating analogue electrical measuring instruments and their accessories Part 7: Special requirements for multi-function instruments
JIS C 1263-2:2017 Electromechanical var-hour meters -- Part 2: Measuring instruments used in transaction or certification for connection through transformer
JIS C 1102-6:1997 Direct acting indicating analogue electrical measuring instruments and their accessories Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters
JIS C 8269-2:2016 Low-voltage fuses -- Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) -- Examples of standardized systems of fuses A to K
JIS C 1102-5:1997 Direct acting indicating analogue electrical measuring instruments and their accessories Part 5: Special requirements for phase meters, power factor meters and synchroscopes

国家市场监督管理总局、中国国家标准化管理委员会, Table 2 Main Instruments

GB/T 40216-2021 Data description of intelligent instruments—General requirements of properties database
GB/T 13163.2-2021 Radiation protection instrumentation—Radon and radon decay product measuring instruments—Part 2：Specific requirements for 222Rn and 220Rn measuring instruments

IN-BIS, Table 2 Main Instruments

IS 9249 Pt.2-1982
IS 12754 Pt.2-1989
IS 13875 Pt.2-1993 Digital Measuring Instruments for Measurement and Control Part 2 Terms, Test and Data Sheet Details of Instruments for Measuring Analog Quantities

BE-NBN, Table 2 Main Instruments

NBN-EN 60051-2-1994 Direct acting indicating analogue electrical measuring instruments and their accessories Part 2: Special requirements for ammeters and voltmeters
NBN-EN 60051-5-1994 Direct acting indicating analogue electrical measuring instruments and their accessories Part 5: Special requirements for phase meters, power factor meters and synchroscopes
NBN-EN 60051-3-1994 Direct acting indicating analogue electrical measuring instruments and their accessories Part 3: Special requirements for wattmeters and varmeters

International Organization for Standardization (ISO), Table 2 Main Instruments

ISO 14934-2:2006 Fire tests - Calibration and use of heat flux meters - Part 2: Primary calibration methods
ISO 14934-2:2013 Fire tests - Calibration and use of heat flux meters - Part 2: Primary calibration methods
ISO 3511-2:1984 Process measurement control functions and instrumentation; Symbolic representation; Part 2 : Extension of basic requirements
ISO 20785-2:2020 Dosimetry for exposures to cosmic radiation in civilian aircraft — Part 2: Characterization of instrument response
ISO/TS 18684:2015 Timekeeping instruments - Watch external parts made of hard materials - General requirements and test methods

Lithuanian Standards Office , Table 2 Main Instruments

LST EN IEC 60051-2:2021 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 2: Special requirements for ammeters and voltmeters (IEC 60051-2:2018)
LST EN 15330-2-2008 Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 2: Specification for needle-punched surfaces
LST EN 13312-2-2002 Biotechnology - Performance criteria for piping and instrumentation - Part 2: Couplings
LST EN 60269-2+A1-2002 Low-voltage fuses -- Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) (IEC 60269-2:1986)
LST EN 12514-2-2001 Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests - Parts, valves, pipes, filters, oil de-aerators, meters
LST EN 60051-2-2000 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2: Special requirements for ammeters and voltmeters (IEC 60051-2:1984, 4th edition)
LST EN 60269-2+A1-2002/A2-2002 Low-voltage fuses. Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) (IEC 60269-2:1986/A2:2001)
LST HD 60269-2-2011 Low-voltage fuses -- Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to J (IEC 60269-2:2010, modified)
LST EN 60335-2-56-2003/A1-2008 Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances (IEC 60335-2-56:2002/A1:2008)
LST EN 61207-2-2001 Expression of performance of gas analyzers. Part 2: Oxygen in gas (utilizing high-temperature electrochemical sensors) (IEC 61207-2:1994 + corrigendum 1994)

European Committee for Standardization (CEN), Table 2 Main Instruments

EN 13182:2002 Ventilation for buildings - Instrumentation requirements for air velocity measurements in ventilated spaces
prEN 17694-1-2021 Hydrometry - Performance requirements and test procedures for water monitoring equipment - Devices for the determination of flow - Part 1: Open channel instrumentation

Professional Standard - Aviation, Table 2 Main Instruments

HB 7289-1996 Requirements for cockpit instruments, displays and related controllers of civil transport aircraft
HB 7504.13-1997 Data Requirements for Flight Simulator Design and Performance Flight Instruments

SE-SIS, Table 2 Main Instruments

SIS SS-IEC 965:1991 Nuclear instrumentation — Supplementary control points for reactor shutdown without access to the main control room
SIS SS-EN 60 335-2-56-1991 Safety of Household and similar electrical appliances - Part 2: Particular requirements forprojectors and similar appliances

International Telecommunication Union (ITU), Table 2 Main Instruments

ITU-T H.120 ERRATUM 1-2013 Codecs for videoconferencing using primary digital group transmission; Erratum 1
ITU-T O.150 CORR 1 FRENCH-2002 General Requirements for Instrumentation for Performance Measurements on Digital Transmission Equipment Corrigendum 1 Study Group 4
ITU-T O.150 CORR 1 SPANISH-2002 General Requirements for Instrumentation for Performance Measurements on Digital Transmission Equipment Corrigendum 1 Study Group 4

AENOR, Table 2 Main Instruments

UNE 1096-2:1991 PROCESS MEASUREMENT CONTROL FUNCTIONS AND INSTRUMENTATION. SYMBOLIC REPRESENTATION. PART 2: EXTENSION OF BASIC REQUIREMENTS.
UNE-EN 15330-2:2009 Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 2: Specification for needle-punched surfaces
UNE-EN 12514-2:2001 Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests - Parts, valves, pipes, filters, oil de-aerators, meters.
UNE-EN 61207-2:2002 Expression of performance of gas analyzers -- Part 2: Oxygen in gas (utilizing high-temperature electrochemical sensors).
UNE-HD 60269-2:2014 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K

Association of German Mechanical Engineers, Table 2 Main Instruments

VDI/VDE 2650 Blatt 7-2006 Requirements regarding self-monitoring and diagnosis in field instrumentation - Actuators

American Society for Testing and Materials (ASTM), Table 2 Main Instruments

ASTM D6104-97 Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off
ASTM D6104-97(2003) Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off

TH-TISI, Table 2 Main Instruments

TIS 2110-2002 Low.voltage fuses.part 2: supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)
TIS 2111-2002 Low.voltage fuses.part 2-1: supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)

ES-AENOR, Table 2 Main Instruments

UNE-EN 60051-2:1993

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Table 2 Main Instruments

GB/T 7676.2-2017 Direct acting indicating analogue electrical measuring instruments and their accessories—Part 2：Special requirements for ammeters and voltmeters
GB/T 33626.2-2017 Pneumatic lutricators—Part 2:Test methods to determine the main characteristics to be included in supplier's literature
GB/T 7676.5-2017 Direct acting indicating analogue electrical measuring instruments and their accessories—Part 5：Special requirements for phase meters, power factor meters and synchroscopes

CH-SNV, Table 2 Main Instruments

SN EN ISO 20785-2:2021 Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 2: Characterization of instrument response (ISO 20785-2:2020)

Canadian Standards Association (CSA), Table 2 Main Instruments

CSA C60044-6-07-CAN/CSA-2007 Transformateurs de mesure ?Partie 6 : Prescriptions concernant les transformateurs de courant pour protection pour la r閜onse en r間ime transitoire premi鑢e 閐ition,

GOSTR, Table 2 Main Instruments

GOST 34233.12-2017 Vessels and apparatus. Norms and methods of strength calculation. Requirements for representation of the strength calculations carried out on the computer
GOST R ISO 18132.2-2017 Liquefied natural gas. General requirements for automatic level gauges. Part 2. Gauges in refrigerated-type shore tanks

U.S. Air Force, Table 2 Main Instruments

AIR FORCE MS27573 REV A VALID NOTICE 5-2008 Case, Instrument, 2-3/4 Inch Dial, with Sump, Flange Mounted, Aircraft

Professional Standard - Energy, Table 2 Main Instruments

NB/T 20228-2013 Type testing of measuring sensors and transducers of safety important instrumentation and control system for nuclear power plants

ZA-SANS, Table 2 Main Instruments

SANS 1515-2:2006 Gas measuring equipment primarily for use in mines Part 2: Fixed, transportable, and vehicle-mounted flammable gas measuring and warning sensor heads and instruments

Professional Standard - Medicine, Table 2 Main Instruments

YY 0792.2-2010 Ophthalmic instruments.Endoilluminators.Part 2 : Fundamental requirements and test methods for optical radiation safety