ZH
RU
ES
Analysis of temperature field
Analysis of temperature field, Total:498 items.
In the international standard classification, Analysis of temperature field involves: Protection against dangerous goods, Particle size analysis. Sieving, Soil quality. Pedology, Earthworks. Excavations. Foundation construction. Underground works, Plastics, Thermodynamics and temperature measurements, Nuclear energy engineering, Electrical accessories, Analytical chemistry, Paints and varnishes, Materials for the reinforcement of composites, Integrated circuits. Microelectronics, Environmental testing, Aids for disabled or handicapped persons, Medical equipment, Products of the chemical industry, Non-ferrous metals, Aircraft and space vehicles in general, Fertilizers, Metalliferous minerals, Reinforced plastics, Testing of metals, Environmental protection, Astronomy. Geodesy. Geography, Sensory analysis, Telecommunication systems, Road vehicle systems, Glass, Pesticides and other agrochemicals, Construction materials, Sports equipment and facilities, Optics and optical measurements, Audio, video and audiovisual engineering, Fuels, Measurement of volume, mass, density, viscosity, Ceramics, Sugar. Sugar products. Starch, Geology. Meteorology. Hydrology, Water quality, Measurement of fluid flow, Rubber and plastics products, Lighting, Applications of information technology, Farming and forestry, Valves, Radiation measurements, Tea. Coffee. Cocoa, Coals, Cutting tools, Equipment for the chemical industry, Industrial automation systems, Linear and angular measurements, Electricity. Magnetism. Electrical and magnetic measurements, Vocabularies, Products of the textile industry, Lubricants, industrial oils and related products, Inorganic chemicals, Adhesives, Ferrous metals, Electrical and electronic testing, Energy and heat transfer engineering in general, Air quality, Standardization. General rules.
German Institute for Standardization, Analysis of temperature field
- DIN 66115:1983-02 Particle size analysis; sedimentation analysis in the gravitational field; pipette method
- DIN 66116-1:1973-11 Particle size analysis; sedimentation analysis in the gravitational field, sedimentation balance
- DIN 66115:1983 Particle size analysis; sedimentation analysis in the gravitational field; pipette method
- DIN 66116-1:1973 Particle size analysis; sedimentation analysis in the gravitational field, sedimentation balance
- DIN 66111 Bb.1:1989 Particle size analysis; sedimention analysis; principles; evaluation equations for determination of quantities in the field of centrifugal force
- DIN 66111 Beiblatt 1:1989-02 Particle size analysis; sedimention analysis; principles; evaluation equations for determination of quantities in the field of centrifugal force
- DIN 51004:1994 Thermal analysis; determination of melting temperatures of crystalline materials by differential thermal analysis
- DIN 66165-2:1987 Particle size analysis; sieve analysis; procedure
- DIN 66111:1989 Particle size analysis; sedimentation analysis; principles
- DIN 66111:1989-02 Particle size analysis; sedimentation analysis; principles
- DIN 66118:1984 Particle size analysis; size analysis by air classification; fundamentals
- DIN 10751-1:2010 Analysis of honey - Determination of hydroxymethylfurfural - Part 1: Winkler photometric method
- DIN 10751-1:2021-06 Analysis of honey - Determination of content of hydroxymethylfurfural - Part 1: Winkler photometric method
- DIN 66165-2:2016 Particle size analysis - Sieving analysis - Part 2: Procedure
- DIN 66165-2:2016-08 Particle size analysis - Sieving analysis - Part 2: Procedure
- DIN 66165-1:1987 Particle size analysis; sieve analysis; general principles
- DIN 66119:2016-10 Particle size analysis - Size analysis by air classification with gravitation-counterflow elutriator
- DIN EN ISO 22007-3:2012-04 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008); German version EN ISO 22007-3:2012
- DIN 66165-1:2022 Particle size analysis - Sieving analysis - Part 1: Fundamentals
- DIN 66165-1:2022-06 Particle size analysis - Sieving analysis - Part 1: Fundamentals
- DIN EN 12470-2:2009-11 Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers; German version EN 12470-2:2000+A1:2009 / Note: DIN EN 12470-2 (2001-02) remains valid alongside this standard until 2010-03-21.
- DIN 66165-1:2016 Particle size analysis - Sieving analysis - Part 1: Fundamentals
- DIN 66120:1983 Particle size analysis; size analysis by air classification with centrifugal counterflow classifier
- DIN 66120:2016 Particle size analysis - Size analysis by air classification with centrifugal counterflow classifier
- DIN EN 62226-3-1:2008 Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body - Part 3-1: Exposure to electric fields - Analytical and 2D numerical m
- DIN 10751-1:1992 Analysis of honey; determination of hydroxymethylfurfural; Winkler photometric method
- DIN 66119:2016 Particle size analysis - Size analysis by air classification with gravitation-counterflow elutriator
- DIN 66119:1983 Particle size analysis; size analysis by air classification with gravitation-counterflow elutriator
- DIN 66120:2016-10 Particle size analysis - Size analysis by air classification with centrifugal counterflow classifier
- DIN EN 13486:2022-08 Temperature recorders and thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Periodic verification; German and English version prEN 13486:2022 / Note: Date of issu...
- DIN EN 61207-6:1995 Expression of performance of gas analyzers - Part 6: Photometric analyzers (IEC 61207-6:1994); German version EN 61207-6:1994
- DIN ISO 6344-1:2000 Coated abrasives - Grain size analysis - Part 1: Grain size distribution test (ISO 6344-1:1998)
- DIN EN ISO 1893:2008-09 Refractory products - Determination of refractoriness under load - Differential method with rising temperature (ISO 1893:2007); German version EN ISO 1893:2008
- DIN EN 61207-6:2016-03 Expression of performance of gas analyzers - Part 6: Photometric analyzers (IEC 61207-6:2014); German version EN 61207-6:2015 / Note: DIN EN 61207-6 (1995-02) remains valid alongside this standard until 2017-12-30.
AT-ON, Analysis of temperature field
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Analysis of temperature field
- GB/T 21780-2008 ParticaI size analysis.Sedimentation analysis in the gravitational field.Pipette method
- GB/T 29189-2012 Thermo gravimetric analysis(TGA) for determination of oxidation temperature and ash content of carbon nanotubes
- GB/T 11606.5-1989 The method of environmental test for analytical instruments--Change of temperature test
- GB/T 11998-1989 Determination of glass transition temperature of plastics--Thermomechanical analysis
- GB/T 19469-2004 Determination of ignition temperature of pyrotechnic composition-DTA-TG analysis
- GB 936-1989 Colour TV receiver－Colour temperature of white point－Reference white and it's tolerance
- GB/T 936-1989 Colour TV receiver--Colour temperature of white point--Reference white and it's tolerance
- GB/T 38521-2020 Gas analysis—Purity analysis and the treatment of purity data
- GB/T 42348-2023 Particle Size Analysis Particle Tracking Analysis (PTA)
- GB/T 42919.3-2023 Determination of thermal conductivity and thermal diffusivity of plastics - Part 3: Temperature wave analysis
- GB/T 21649.1-2008 Particle size analysis.Image analysis methods.Part 1: Static image analysis method
- GB/T 1425-1996 Determination of melting temperature range for precious metals and their alloys--Testing method of thermal analysis
- GB/T 29557-2013 Surface chemical analysis.Depth Profiling.Measurment of sputtered depth
- GB/T 25844-2010 Fiele analyzer house system in process
- GB/T 29025-2012 Determination of particle size distributions.Electrical sensing zone method
- GB/T 11606.9-1989 The method of environmental test for analytical instruments--Magnetic field test
- GB/T 31536-2015 Analytical method of chemical composition for copper series arsenic removal agent at room temperature
- GB/T 18403.6-2013 Expression of performance of gas analyzers.Part 6:Photometric analyzers
- GB/T 14074.18-1993 Test methods for wood adhesives and their resins - Determination of precipitation temperature
- GB/T 11606.3-1989 The method of environmental test for analytical instruments--Cold test
- GB/T 11606.4-1989 The method of environmental test for analysical instruments--High temperature test
- GB/T 18021-2000 In-situ measurements of heat loss through thermal insulation of equipments and pipes-Surface temperature method
- GB/T 19077.1-2003 Particle size analysis--Laser diffraction method
Professional Standard - Geology, Analysis of temperature field
- DZ/T 0064.3-2021 Groundwater Quality Analysis Methods Part 3: Determination of Temperature Thermometer (Pyrometer) Method
WRC - Welding Research Council, Analysis of temperature field
American Welding Society (AWS), Analysis of temperature field
- WRC 510:2006 Analysis of the Effects of Temperature on Bolted Joints
- WRC 564:2020 The MPC Lot-Centered Analysis Method for Determining High Temperature Strength Parameters
RU-GOST R, Analysis of temperature field
- GOST 25358-1982 Soils. Field method of determining temperature
- GOST 25358-2012 Soils. Field method of determining temperature
- GOST R 56723-2015 Plastics. Thermomechanical analysis (TMA). Part 3. Determination of penetration temperature
- GOST 29127-1991 Plastics. Thermogravimetry of polymers. Temperature scanning method
- GOST R 52728-2007 Method of strain-and-temperature measurements in situ. General requirements
- GOST 27981.5-1988 Copper of high purity. Methods of photometric analysis
- GOST 27981.5-2015 Copper of high purity. Methods of photometric analysis
- GOST 24849-1981 Potable water. Field methods of sanitary and microbiological analysis
- GOST 24849-2014 Water. Methods of sanitary- bacteriological analysis for field conditions
- GOST R 57739-2017 Polymer composites. Method for determination of glass transition temperature by dynamic mechanical analysis
- GOST 27753.0-1988 Greenhouse grounds. General requirements to methods for analysis
- GOST 27981.6-1988 Copper of high purity. Methods of polarographic analysis
GOSTR, Analysis of temperature field
- GOST 25358-2020 Soils. Field method of determining the temperature
- GOST R 57931-2017 Composites. Determination of melting and crystallization temperatures by thermal analysis
- GOST R 58888-2020 Soils. Field test method with the use of cone penetration with temperature measurement
- GOST R 59242-2020 Buildings and constructions. Calculation of temperature field nodes of enclosing structures
American National Standards Institute （ANSI), Analysis of temperature field
- ANSI/ASTM D3418:1999 Test Method for Transition Temperatures of Polymers by Thermal Analysis
- ANSI/ASTM F1632:2003 TEST METHOD FOR PARTICLE SIZE ANALYSIS AND SAND SHAPE GRADING OF GOLF COURSE PUTTING GREEN AND SPORTS FIELD ROOTZONE MIXES
American Society for Testing and Materials (ASTM), Analysis of temperature field
- ASTM E1582-93 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
- ASTM E1363-97e1 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
- ASTM E2038-99 Standard Test Method for Temperature Calibration of Dielectric Analyzers
- ASTM E2038-99(2004) Standard Test Method for Temperature Calibration of Dielectric Analyzers
- ASTM E1582-21 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
- ASTM E967-97 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E1363-03 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
- ASTM E1582-17 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
- ASTM E1363-18 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
- ASTM E1363-16 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
- ASTM E1363-13 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
- ASTM E1363-08 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
- ASTM E1363-23 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
- ASTM E1867-97 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
- ASTM E1867-01 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
- ASTM E1867-18 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
- ASTM E2347-11 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
- ASTM E1867-22 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
- ASTM E1867-16 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
- ASTM F2004-17 Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
- ASTM F2004-16 Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
- ASTM E1775-20 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
- ASTM D3418-99 Standard Test Method for Transition Temperatures of Polymers By Differential Scanning Calorimetry
- ASTM E1867-06 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
- ASTM D3450-00(2010) Standard Test Method for Washability Properties of Interior Architectural Coatings
- ASTM E1867-11 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
- ASTM E1867-13 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
- ASTM E1867-12 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
- ASTM D3418-15 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
- ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
- ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
- ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
- ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
- ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
- ASTM E1545-11 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
- ASTM F1632-02 Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
- ASTM F1632-03(2018) Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
- ASTM E1545-00 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
- ASTM E794-06 Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis
- ASTM E794-01 Standard Test Method for Melting and Crystallization Temperatures by Thermal Analysis
- ASTM E1545-05 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
- ASTM F2004-05(2010) Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
- ASTM D3418-82(1988)e1 Standard Test Method for Transition Temperatures of Polymers By Thermal Analysis
- ASTM E794-98 Standard Test Method for Melting and Crystallization Temperatures by Thermal Analysis
- ASTM E2995-15a(2020) Standard Specification for ASTM Thermohydrometers with Integral Low-Hazard Thermometers
- ASTM E794-06(2018) Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis
- ASTM E1824-08 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis
- ASTM E794-06(2012) Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis
- ASTM E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
- ASTM E967-08(2014) Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E1824-02 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis Under Tension
- ASTM E1824-96 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis Under Tension
- ASTM E1640-13(2018) Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
- ASTM E1640-18 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
- ASTM E1640-13 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
- ASTM D5922-96(2004) Standard Guide for Analysis of Spatial Variation in Geostatistical Site Investigations
- ASTM D5922-96e1 Standard Guide for Analysis of Spatial Variation in Geostatistical Site Investigations
- ASTM D5922-96(2010) Standard Guide for Analysis of Spatial Variation in Geostatistical Site Investigations
- ASTM F2004-05 Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
- ASTM E2347-05 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
- ASTM E2347-04 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
- ASTM E1640-04 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
- ASTM F2004-00 Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
- ASTM D5540-94a(1999) Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis
- ASTM F2004-03 Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
- ASTM E2347-16 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
- ASTM E2347-21 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
- ASTM E1640-09 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
- ASTM D5540-94a(2003) Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis
- ASTM D5540-08 Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis
- ASTM E1775-16 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
- ASTM E1545-22 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
- ASTM E1545-11(2016) Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
- ASTM E2092-13 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
- ASTM E1640-99 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
- ASTM E967-03 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E967-08 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E1824-18 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
- ASTM E1824-19 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
- ASTM E967-18 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E1640-23 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
- ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
- ASTM E1824-13 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
- ASTM E1824-09 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
- ASTM E1824-09e1 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
- ASTM D7808-18 Standard Practice for Determining the Site Precision of a Process Stream Analyzer on Process Stream Material
- ASTM D7808-22 Standard Practice for Determining the Site Precision of a Process Stream Analyzer on Process Stream Material
- ASTM D7808-12 Standard Practice for Determining the Site Precision of a Process Stream Analyzer on Process Stream Material
- ASTM E1775-96 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
- ASTM E1775-01 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
- ASTM E1775-07(2016) Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
- ASTM E3301-22 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers Using Thermal Lag
- ASTM D5540-13(2021) Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis
- ASTM D5540-13 Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis
- ASTM D4178-82(2005) Standard Practice for Calibrating Moisture Analyzers
- ASTM E2488-09 Standard Guide for the Preparation and Evaluation of Liquid Baths Used for Temperature Calibration by Comparison
- ASTM E1880-97(2002) Standard Practice for Tissue Cryosection Analysis with SIMS
- ASTM E1775-07 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
- ASTM C1046-95 Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
- ASTM E1356-98 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry or Differential Thermal Analysis
API - American Petroleum Institute, Analysis of temperature field
Professional Standard - Nuclear Industry, Analysis of temperature field
- EJ/T 924-1995 Transient Analysis of Light Water Reactor Compartment Pressure and Temperature
- EJ/T 1013-1996 Transient Analysis of Light Water Reactor Containment Pressure and Temperature
ANS - American Nuclear Society, Analysis of temperature field
- 56.10-1982 Subcompartment Pressure and Temperature Transient Analysis in Light Water Reactors
- 56.4-1983 Pressure and Temperature Transient Analysis for Light Water Reactor Containments
- 3.8.5-1992 Criteria for Emergency Radiological Field Monitoring@ Sampling@ and Analysis
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Analysis of temperature field
- ASHRAE 3752-1994 Design Sensitivity Analysis for Optimal Temperature Control of a Radiant Electric Slab
- ASHRAE DA-00-3-5-2000 Impact of Heating Systems and Wall Surface Temperatures on Room Operative Temperature Fields
- ASHRAE 3823-1994 Unsteady-State Thermal Analysis of a Large Space with Vertical Temperature Distribution
- ASHRAE PH-97-6-3-1997 Investigations of the EPA Refrigerator Analysis (ERA) Software: Compressor Map and Ambient Temperature Effects
- ASHRAE AC-02-15-3-2002 Ground Thermal Conductivity Testing - Controlled Site Analysis
- ASHRAE 4216-1998 Identification of Mixing Effects in Stratified Chilled-Water Storage Tanks by Analysis of Time Series Temperature Data
- ASHRAE SA-96-10-4-1996 Field Experiences in Residential Humidification Control with Temperature-Compensated Automatic Humidistats
- ASHRAE 4704-2004 Analysis and Validation of a Psychrometric Apparatus
国家能源局, Analysis of temperature field
- NB/T 10308-2019 Infrared temperature field distribution test method for electric heating elements
- NB/T 20403-2017 Transient analysis of pressure and temperature in compartments of pressurized water reactor nuclear power plants
- NB/T 20404-2017 Transient analysis of pressure and temperature of containment of pressurized water reactor nuclear power plant
KR-KS, Analysis of temperature field
Association Francaise de Normalisation, Analysis of temperature field
- NF X11-680:1980 PARTICLE SIZE ANALYSIS BY SEDIMENTATION METHOD IN THE GRAVITATIONAL FIELD IN A LIQUID.
- NF T30-603:1978 Paints. Fillers for interior use. Differential thermal analysis.
- NF EN ISO 11357-6:2018 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 6 : détermination du temps d'induction à l'oxydation (OIT isotherme) et de la température d'induction à l'oxydation (OIT dynamique)
- NF ISO 24087:2023 Caoutchouc vulcanisé - Détermination de la température de transition vitreuse et de l'enthalpie par analyse calorimétrique différentielle
- NF U42-681:2020 Determination of salt out (crystallization) temperature of liquid fertilizers
- NF ISO 21870:2005 Ingrédients de mélange du caoutchouc - Noir de carbone - Détermination de la perte à la chaleur à haute température par thermogravimétrie
- NF X20-104:2015 Gas analysis - Purity analysis and the treatment of purity data
- NF ISO 19229:2019 Analyse des gaz - Analyse de pureté et traitement des données de pureté
- NF EN ISO 8589:2010 Analyse sensorielle - Directives générales pour la conception de locaux destinés à l'analyse
- NF X20-104*NF ISO 19229:2019 Gas analysis - Purity analysis and the treatment of purity data
- NF EN ISO 22007-3:2012 Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique - Partie 3 : méthode par analyse de l'oscillation de la température
- NF M03-021:1967 Analyse granulométrique du coke
- NF EN 12470-2/IN1:2009 Thermomètres médicaux - Partie 2 : thermomètres à changement de phase (matrice à points)
- NF EN 12470-2+A1:2009 Thermomètres médicaux - Partie 2 : thermomètres à changement de phase (matrice à points)
- NF X11-681:1982 Particle size analysis. Particle size analysis by gravity sedimentation. Pipette method.
- NF T51-227-3*NF EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3 : temperature wave analysis method
- NF EN ISO 11357-3:2018 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 3 : détermination de la température et de l'enthalpie de fusion et de cristallisation
- NF C99-115-3-1*NF EN 62226-3-1:2008 Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body - Part 3-1 : exposure to electric fields - Analytical and 2D numerical
- NF X11-630:2001 Particle size analysis - Vocabulary.
- FD X31-611-1-1997 SOIL QUALITY. POLLUTION DETECTION AND CHARACTERIZATION METHODS. GENERAL GUIDE FOR SOIL GAS ANALYSES ON SITE USED IN LAND SCREENING.
- NF V05-223:1986 Instant coffee. Size analysis.
- NF T70-302:1995 Energetic materials for defense. Physical-chemical analysis and properties. Tnt solidifcation temperature. Automatized method.
- NF EN ISO 7579:2009 Colorants - Détermination de la solubilité dans les solvants organiques - Méthodes gravimétrique et photométrique
- NF EN 61207-6:2015 Expression des performances des analyseurs de gaz - Partie 6 : analyseurs photométriques
- FD X43-212*FD ISO/TR 17737:2013 Workplace atmospheres - Guidelines for selecting analytical methods for sampling and analysing isocyanates in air
- FD ISO/TR 17737:2013 Atmosphères des lieux de travail - Lignes directrices pour la sélection des méthodes analytiques d'échantillonnage et d'analyse des isocyanates dans l'air
British Standards Institution (BSI), Analysis of temperature field
- BS ISO 11359-3:2002 Plastics - Thermomechanical analysis (TMA) - Determination of penetration temperature
- BS EN ISO 22007-3:2012 Plastics. Determination of thermal conductivity and thermal diffusivity. Temperature wave analysis method
- BS ISO 23381:2020 Determination of salt out (crystallization) temperature of liquid fertilizers
- BS ISO 11359-3:2019 Tracked Changes. Plastics. Thermomechanical analysis (TMA). Determination of penetration temperature
- BS ISO 19229:2015 Gas analysis. Purity analysis and the treatment of purity data
- BS ISO 13322-2:2006 Particle size analysis - Image analysis methods - Dynamic image analysis methods
- 20/30379723 DC BS ISO 23381. Determination of Salt Out (Crystallization) Temperature of Liquid Fertilizers
- DD IEC/TS 62306:2006 Ultrasonics. Field characterisation. Test objects for determining temperature elevation in diagnostic ultrasound fields
- BS ISO 13322-1:2005 Particle size analysis - Image analysis methods - Static image analysis methods
- BS ISO 13322-1:2014 Particle size analysis. Image analysis methods. Static image analysis methods
- BS 1427:2009 Guide to on-site test methods
for the analysis of waters
- BS EN 62226-3-1:2007 Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body - Exposure to electric fields - Analytical and 2D numerical models
- BS ISO 19229:2019 Tracked Changes. Gas analysis. Purity analysis and the treatment of purity data
- BS ISO 728:2021 Coke. Size analysis by sieving
- BS ISO 6344-1:1998 Coated abrasives. Grain size analysis. Grain size distribution test
- BS EN 62226-3-1:2007+A1:2017 Exposure to electric or magnetic fields in the low and intermediate frequency range. Methods for calculating the current density and internal electric field induced in the human body - Exposure to electric fields. Analytical and 2D numerical…
- BS 1427:1993 Guide to field and on-site test methods for the analysis of waters
- BS ISO 13322-2:2021 Tracked Changes. Particle size analysis. Image analysis methods. Dynamic image analysis methods
- BS DD IEC/TS 62306:2008 Ultrasonics - Field characterisation - Test objects for determining temperature elevation in diagnostic ultrasound fields
- BS 1041-2.2:1989 Code for temperature measurement - Expansion thermometers - Guide to selection and use of dial-type expansion thermometers
- BS 1041-2.2:1990 Code for temperature measurement. Expansion thermometers. Guide to selection and use of dial-type expansion thermometers
- PD ISO/TR 17737:2012 Workplace atmospheres. Guidelines for selecting analytical methods for sampling and analysing isocyanates in air
- BS ISO 1953:2015 Hard coal. Size analysis by sieving
- BS ISO 11359-2:1999 Plastics - Thermomechanical analysis (TMA) - Determination of coefficient of linear thermal expansion and glass transition temperature
- BS 7020-9.1:1989 Analysis of iron ores - Methods for the determination of manganese content - Spectrophotometric method
- BS 1041 Sec.2.1:1985 Temperature measurement. Expansion thermometers. Guide to selection and use of liquid-in-glass thermometers
- 20/30365224 DC BS ISO 13322-2. Particle size analysis. Image analysis methods. Part 2. Dynamic image analysis methods
- BS ISO 16258-2:2015 Workplace air. Analysis of respirable crystalline silica by X-ray diffraction. Method by indirect analysis
CZ-CSN, Analysis of temperature field
International Organization for Standardization (ISO), Analysis of temperature field
- ISO 7111:1987 Plastics; Thermogravimetry of polymers; Temperature scanning method
- ISO 11359-3:2002 Plastics - Thermomechanical analysis (TMA) - Part 3: Determination of penetration temperature
- ISO 11359-3:2019 Plastics — Thermomechanical analysis (TMA) — Part 3: Determination of penetration temperature
- ISO 23381:2020 Determination of salt out (crystallization) temperature of liquid fertilizers
- ISO 3972:2011 Sensory analysis - Methodology - Method of investigating sensitivity of taste
- ISO 19229:2015 Gas analysis - Purity analysis and the treatment of purity data
- ISO 19229:2019 Gas analysis — Purity analysis and the treatment of purity data
- ISO/TR 15969:2021 Surface chemical analysis — Depth profiling — Measurement of sputtered depth
- ISO 1953:1972 Hard coals; Size analysis
- ISO 13322-1:2004 Particle size analysis - Image analysis methods - Part 1: Static image analysis methods
- ISO 13322-2:2006 Particle size analysis - Image analysis methods - Part 2: Dynamic image analysis methods
- ISO 13322-1:2014 Particle size analysis - Image analysis methods - Part 1: Static image analysis methods
- ISO/DIS 1953:2022 Hard coal — Size analysis by sieving
- ISO 22007-3:2008 Plastics — Determination of thermal
conductivity and thermal diffusivity —
Part 3:
Temperature wave analysis method
- ISO 13322-2:2021 Particle size analysis — Image analysis methods — Part 2: Dynamic image analysis methods
- ISO 7532:1985 Instant coffee - Size analysis
- ISO 728:1974 Title missing - Legacy paper document
- ISO 1953:1994 Hard coal - Size analysis by sieving
- ISO 1953:2015 Hard coal - Size analysis by sieving
- ISO 728:2021 Coke - Size analysis by sieving
- ISO 11359-2:1999 Plastics - Thermomechanical analysis (TMA) - Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
- ISO 11359-2:2021 Plastics — Thermomechanical analysis (TMA) — Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
Group Standards of the People's Republic of China, Analysis of temperature field
Professional Standard - Aerospace, Analysis of temperature field
- QJ 1138-1987 Ablation of silicon-based materials—calculation method of temperature field
- QJ 2838.1-1996 Methylhydrazine purity and moisture analysis method Methylhydrazine purity analysis method (potassium iodate method)
- QJ 1409-1988 Calculation method and computer program for temperature field of solid rocket motor nozzle
PL-PKN, Analysis of temperature field
- PN C89431-1993 Plastics. Thermogravimetry of polymers. Temperature scanning method
- PN Z04176-02-1986 Air purity protection ests for MCPA etermination of MCPA in work laces by gas chromatography
- PN Z04159-02-1986 Air purity protection ests for phenol etermination of phenol in work laces by gas hromatography
- PN Z04175-02-1986 Air purity protection ests for 2,4-D etermination of 2,4-D in work places y gas chromatography
- PN Z04214-02-1990 Air purity protection Tests for furfuryl alcohol Determination of furfuryl alcohol in work places by gas chromatography
- PN C84001-13-1987 Sodium carbonate technical Size analysis
Korean Agency for Technology and Standards (KATS), Analysis of temperature field
Professional Standard - Aviation, Analysis of temperature field
- HB 6623.1-1992 Method for Determination of β Transition Temperature of Titanium Alloy Differential Thermal Analysis
- HB 6219-1989 The installation of aircraft guns requires the protection of the muzzle shock wave pressure field and temperature field
- HB 5220.10-1995 Method for Chemical Analysis of Superalloys Silicon Molybdenum Blue Absorption Spectrophotometry for Determination of Silicon Content
- HB 5220.44-1995 Method for chemical analysis of superalloys Distillation and separation-Molybdenum blue absorptiophotometry for determination of arsenic content
- HB 5220.13-1995 Method for chemical analysis of superalloys Potassium periodate absorptiometry for determination of manganese content
- HB 5220.20-1995 Chemical Analysis Method of Superalloys Chromoazurin S Absorption Spectrophotometry Determination of Aluminum Content
- HB 5220.22-1995 Determination of molybdenum content by thiocyanate absorptiophotometry for chemical analysis of superalloys
- HB 5220.24-1995 Method for chemical analysis of superalloys Diacetyl-oxime absorptiometry for determination of nickel content
- HB 5220.4-1995 Chemical Analysis Methods of Superalloys - Determination of Sulfur Content by Reduction Distillation Absorbance Photometry
- HB 5220.42-1995 Determination of Cerium Content by DBC-Arsenazo Absorption Spectrophotometry Method for Chemical Analysis of Superalloys
- HB 5220.30-1995 Superalloy chemical analysis method o-phenanthroline absorptiophotometry determination of iron content
- HB 5220.32-1995 Method for chemical analysis of superalloys-thiocyanate absorptiometry for determination of tungsten content
- HB 5220.43-1995 Determination of Lanthanum Content by DBC-Arsenazo Absorption Spectrophotometry Method for Chemical Analysis of Superalloys
- HB 5220.10-2008 Methods for chemical analysis of superalloys. Part 10: Determination of silicon content by silicon molybdenum blue photometric method
- HB 5220.26-1995 Determination of Cobalt Content by Nitroso R Salt Absorption Spectrophotometry Method for Chemical Analysis of Superalloys
- HB 5220.46-1995 Determination of bismuth content by semi-xylenol orange absorptiophotometry method for chemical analysis of superalloys
- HB 5220.34-1995 Chlorosulfonol C absorptiophotometric method for chemical analysis of superalloys Determination of niobium content
- HB 5220.4-2008 Methods for chemical analysis of superalloys.Part 4: Determination of sulfur content by reducing distillation photometric method
- HB 5220.13-2008 Methods for chemical analysis of superalloys. Part 13: Determination of manganese content by potassium periodate photometric method
- HB 5220.20-2008 Methods for chemical analysis of superalloys. Part 20: Determination of aluminum content by chrome azurol S photometric method
- HB 5220.22-2008 Methods for chemical analysis of superalloys. Part 22: Determination of molybdenum content by thiocyanate photometric method
- HB 5220.24-2008 Methods for chemical analysis of superalloys. Part 24: Determination of nickel content by dimethylglyoxime photometric method
- HB 5220.30-2008 Methods for chemical analysis of superalloys. Part 30: Determination of iron content by phenanthroline photometric method
- HB 5220.32-2008 Methods for chemical analysis of superalloys. Part 32: Determination of tungsten content by thiocyanate photometric method
- HB 5220.42-2008 Methods for chemical analysis of superalloys. Part 42: Determination of cerium content by DBC-arsenazo photometric method
- HB 5220.43-2008 Methods for chemical analysis of superalloys. Part 43: Determination of lanthanum content by DBC-arsenazo photometric method
- HB 5220.38-1995 Extraction and Separation by Chemical Analysis Method of Superalloy - Determination of Cerium Content by ArsenazoⅢ Absorbance Spectrophotometry
- HB 5220.44-2008 Methods for chemical analysis of superalloys. Part 44: Determination of arsenic content by distillation separation-molybdenum blue photometric method
- HB 5220.35-1995 Method for Chemical Analysis of Superalloys-Pyrogallic Acid Absorption Spectrophotometry for Determination of Tantalum Content
- HB 5220.36-1995 Determination of Zirconium Content by Arsenazo Ⅲ Direct Absorption Spectrophotometry Method for Chemical Analysis of Superalloys
- HB 5220.45-1995 Chemical Analysis Method of Superalloy Carrier Precipitation-Molybdenum Blue Absorption Spectrophotometry Determination of Antimony Content
- HB 5220.7-1995 Chemical Analysis Method of Superalloy Ether Extraction-Molybdenum Blue Absorption Spectrophotometry Determination of Phosphorus Content
- HB 5220.26-2008 Methods for chemical analysis of super alloys. Part 26: Determination of cabalt content by nitroso-R-salt photometric method
- HB 5220.34-2008 Methods for chemical analysis of superalloys. Part 34: Determination of niobium content by sulphochlorophenol C photometric method
- HB 5220.46-2008 Methods for chemical analysis of superalloys. Part 46: Determination of bismuth content by semixylenol orange photometric method
- HB 5220.40-1995 Method for Chemical Analysis of Superalloys Methanol Distillation-Curcumin Absorption Spectrophotometry for Determination of Boron Content
- HB 5220.27-1995 Methods for chemical analysis of superalloys Copper reagent-ether extraction absorptiometry for determination of copper content
- HB 5220.18-1995 Method for chemical analysis of superalloys Diantipyridine methane absorptiometry for determination of titanium content
- HB 5220.7-2008 Methods for chemical analysis of superalloys. Part 7: Determination of phosphorus content by ethyl ether extraction molybdenum blue photometric method
- HB 5220.35-2008 Methods for chemical analysis of superalloys. Part 35: Determination of tantalum content by pyrogallic acid photometric method
- HB 5220.36-2008 Methods for chemical analysis of superalloys. Part 36: Determination of zirconium content by arsenazo Ⅲ photometric method
- HB 5220.45-2008 Methods for chemical analysis of superalloys. Part 45: Determination of antimony content by carrier precipitation molybdenum blue photometric method
Professional Standard - Energy, Analysis of temperature field
- NB/T 20403-2017RK Transient analysis of pressure and temperature in pressurized water reactor nuclear power plant compartment
- NB/T 20404-2017RK Transient Analysis of Containment Pressure and Temperature in PWR Nuclear Power Plant
Professional Standard - Medicine, Analysis of temperature field
- YY/T 0641-2008 Standard Test Method for Transformation Temperature Of nickel.Titanium Alloys by Thermal analysis
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Analysis of temperature field
- GB/T 34511-2017 Relative motion analysis elements after LV/SC separation
- GB/T 21649.2-2017 Particle size analysis—Image analysis methods—Part2：Dynamic image analysis methods
- GB/T 33067-2016 Analysis method of chemical composition for Pd deoxidant catalyst at the middle temperature
Taiwan Provincial Standard of the People's Republic of China, Analysis of temperature field
US-FCR, Analysis of temperature field
National Metrological Technical Specifications of the People's Republic of China, Analysis of temperature field
- JJF 1821-2020 Calibration Specification for Temperature Calibration Devices for Polymerase Chain Reaction Analyzers
- JJF 1184-2007 Testing Specification of Temperature Uniformity in Thermocouple Calibration Furnaces
- JJF 1570-2016 Calibration specification for on-site dynamic balance measurement analyzer
Japanese Industrial Standards Committee (JISC), Analysis of temperature field
- JIS K 7095:2012 Testing method for glass transition temperatures of carbon fibre reinforced plastics by thermal analysis
- JIS Z 8829:2021 Particle size analysis -- Particle tracking analysis (PTA) method
- JIS Z 8827-1:2008 Particle size analysis -- Image analysis methods -- Part 1: Static image analysis methods
- JIS Z 8827-2:2010 Particle size analysis -- Image analysis methods -- Part 2: Dynamic image analysis methods
- JIS Z 8827-1:2018 Particle size analysis -- Image analysis methods -- Part 1: Static image analysis methods
- JIS H 7802:2005 Testing method of ultrafine metal particles for ignition temperature by differential thermal analysis
- JIS K 0117:2017 General rules for infrared spectrophotometric analysis
- JIS Z 8725:2015 Methods for determining distribution temperature and colour temperature or correlated colour temperature of light sources
- JIS Z 8725:1999 Methods for determining distribution temperature and color temperature or correlated color temperature of light sources
中华人民共和国国家卫生和计划生育委员会, Analysis of temperature field
民政部, Analysis of temperature field
- MZ/T 066-2016 On-site identification of winter wheat low temperature and freezing damage degree
U.S. Environmental Protection Agency (U.S. EPA), Analysis of temperature field
GB-REG, Analysis of temperature field
Society of Automotive Engineers (SAE), Analysis of temperature field
工业和信息化部, Analysis of temperature field
- YS/T 1258-2018 Thermal Analysis Methods for Testing Melting and Crystallization Temperatures of Nonferrous Metal Materials
- HG/T 5198-2017 Analysis method of chemical composition of medium temperature iron oxide desulfurizer
- HG/T 5317-2018 Analysis method of chemical components of room temperature demercaptan catalyst
Professional Standard - Chemical Industry, Analysis of temperature field
Standard Association of Australia （SAA）, Analysis of temperature field
Sichuan Provincial Standard of the People's Republic of China, Analysis of temperature field
IETF - Internet Engineering Task Force, Analysis of temperature field
- RFC 7445-2015 Analysis of Failure Cases in IPv6 Roaming Scenarios
European Association of Aerospace Industries, Analysis of temperature field
- AECMA PREN 3877-1997 Aerospace Series Metallic Materials Test Method Determination of Solidus and Liquidus Temperatures by Differential Thermal Analysis of Braze Alloys Edition P 1
- AECMA PREN 3877-1993 Aerospace Series Test Method for Braze Alloys Determination of Solidus and Liquidus Temperatures by Differential Thermal Analysis
Professional Standard - Railway, Analysis of temperature field
National Metrological Verification Regulations of the People's Republic of China, Analysis of temperature field
- JJG 2030-1989 Verification Scheme of Measuring Instruments for Colour Temperature (Distribution Temperature)
- JJG 213-2003 Standard Lamps for Distribution (Colour) Temperature
Danish Standards Foundation, Analysis of temperature field
- DS/IEC/TS 62306:2007 Ultrasonics - Field characterisation - Test objects for determining temperature elevation in diagnostic ultrasound fields
- DS/EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method
- DS/EN 12470-2+A1:2009 Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers
- DS/EN 62226-3-1:2008 Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body - Part 3-1: Exposure to electric fields - Analytical and 2D numerical m
- DS/ISO 1953:1994 Hard coal - Size analysis by sieving
North Atlantic Treaty Organization Standards Agency, Analysis of temperature field
- STANAG 4540-2002 EXPLOSIVES, PROCEDURES FOR DYNAMIC MECHANICAL ANALYSIS (DMA) AND DETERMINATION OF GLASS TRANSITION TEMPERATURE
HU-MSZT, Analysis of temperature field
Association of German Mechanical Engineers, Analysis of temperature field
- VDI/VDE 2650 Blatt 5-2006 Requirements regarding self-monitoring and diagnosis in field instumentation - Temperature measurement
Professional Standard - Petroleum, Analysis of temperature field
- SY/T 6294-2008 Specification of collecting the logging analytical sample in the wellsite
- SY/T 6542-2003 Core particle sizer
- SY/T 6294-1997 Specifications of collecting analytical sample for oil & gas exploration well in the wellsite
- SY/T 5434-1999 Method of grain-size analysis of clastic rocks
- SY/T 5434-2009 Analysis method for particle size of clastic rocks
European Committee for Standardization (CEN), Analysis of temperature field
- EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008)
- EN 12470-2:2000+A1:2009 Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers
- PD CEN/TR 16422:2012 Classification of thermoregulatory properties
IN-BIS, Analysis of temperature field
RO-ASRO, Analysis of temperature field
ES-AENOR, Analysis of temperature field
ZA-SANS, Analysis of temperature field
ET-QSAE, Analysis of temperature field
International Electrotechnical Commission (IEC), Analysis of temperature field
- IEC 65B/622/DTS:2007 IEC 62492-1: Radiation thermometers - Part 1: Specifications for radiation thermometers
- IEC 62226-3-1:2007 Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body - Part 3-1: Exposure to electric fields - Analytical and 2D numerical m
- IEC 61224:1993 Nuclear reactors; response time in resistance temperature detectors (RTD); in situ measurements
- IEC 61207-6:2014 Expression of Performance of Gas Analyzers - Part 6: Photometric analyzers
- IEC 61207-6:1994 Expression of performance of gas analyzers; part 6: photometric analyzers
Defense Logistics Agency, Analysis of temperature field
- DLA MIL-DTL-8790 F-2007 HOSE ASSEMBLIES, RUBBER, HYDRAULIC, HIGH PRESSURE 3,000 PSI, OPERATING TEMPERATURE RANGE -65癋 TO +275癋, FIELD ATTACHABLE
- DLA A-A-50767 VALID NOTICE 3-2006 ANALYZER, SURFACE FINISH
- DLA A-A-50767 VALID NOTICE 2-2001 ANALYZER, SURFACE FINISH
- DLA A-A-50767 VALID NOTICE 1-1995 ANALYZER, SURFACE FINISH
- DLA A-A-50767-1983 ANALYZER, SURFACE FINISH
国家市场监督管理总局、中国国家标准化管理委员会, Analysis of temperature field
- GB/T 38879-2020 Particle—Size analysis—Color image analysis methods
- GB/T 1425-2021 Determination of melting temperature range for precious metals and their alloys—Testing method of thermal analysis
- GB/T 40396-2021 Test method for glass transition temperature of polymer matrix composites—Dynamic mechanical analysis（DMA）
VN-TCVN, Analysis of temperature field
Lithuanian Standards Office , Analysis of temperature field
- LST EN 12470-2-2002+A1-2009 Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers
- LST EN 62226-3-1-2008 Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body - Part 3-1: Exposure to electric fields - Analytical and 2D numerical m
- LST EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008)
AENOR, Analysis of temperature field
- UNE-EN 12470-2:2001+A1:2009 Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers
- UNE-EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008)
European Committee for Electrotechnical Standardization（CENELEC）, Analysis of temperature field
- EN 62226-3-1:2007 Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body - Part 3-1: Exposure to electric fields - Analytical and 2D numerical m
- EN 61207-6:2015 Expression of performance of gas analyzers - Part 6:Photometric analyzers
ESDU - Engineering Sciences Data Unit, Analysis of temperature field
- ESDU 84007 A-1991 The treatment of calibrations of total air temperature probes for use in flight-test analysis work.
BE-NBN, Analysis of temperature field
United States Navy, Analysis of temperature field
ES-UNE, Analysis of temperature field
- UNE-EN 62226-3-1:2007 Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body -- Part 3-1: Exposure to electric fields - Analytical and 2D numeric...
- UNE-EN 61207-6:2015 Expression of performance of gas analyzers - Part 6:Photometric analyzers (Endorsed by AENOR in February of 2015.)
- UNE-EN ISO 1893:2008 Refractory products - Determination of refractoriness under load - Differential method with rising temperature (ISO 1893:2007) (Endorsed by AENOR in August of 2008.)
- UNE-EN ISO 21028-2:2018 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C (ISO 21028-2:2018)
Guizhou Provincial Standard of the People's Republic of China, Analysis of temperature field
- DB52/T 1395-2018 Technical Specifications for Meteorological Observation and Analysis of Meteorological Conditions at the Proposed Airport Site
American Nuclear Society (ANS), Analysis of temperature field
- ANS 3.8.5-1992 Criteria for Emergency Radiological Field Monitoring, Sampling, and Analysis
ACI - American Concrete Institute, Analysis of temperature field
- ACI SP-129-1991 Computer Analysis of the Effects of Creep@ Shrinkage@ and Temperature Changes on Concrete Structures (Out of Print)
Professional Standard - Coal, Analysis of temperature field
未注明发布机构, Analysis of temperature field
- BS 1041-2.2:1989(2000) Temperature measurement — Part 2 : Expansion thermometers — Section 2.2 Guide to selection and use of dial - type expansion thermometers
- BS 1041-2.1:1985(2007) Temperature measurement — Part 2 : Expansion thermometers — Section 2.1 Guide to selection and use of liquid - in - glass thermometers
IT-UNI, Analysis of temperature field
CENELEC - European Committee for Electrotechnical Standardization, Analysis of temperature field
- EN 61207-6:1994 Expression of Performance of Gas Analyzers Part 6: Photometric Analyzers
YU-JUS, Analysis of temperature field
Institute of Interconnecting and Packaging Electronic Circuits (IPC), Analysis of temperature field