ZH
RU
ES
Syringe pump high pressure
Syringe pump high pressure, Total:426 items.
In the international standard classification, Syringe pump high pressure involves: Internal combustion engines for road vehicles, Medical equipment, Medical sciences and health care facilities in general, Earthworks. Excavations. Foundation construction. Underground works, Fluid power systems, Pumps, Structures of buildings, Equipment for the paper industry, Construction technology, Construction industry, Rotating machinery, Dentistry, Nuclear energy engineering, Internal combustion engines, Agricultural machines, implements and equipment, Manufacturing forming processes, Equipment for the rubber and plastics industries, Equipment for the chemical industry, Shipbuilding and marine structures in general, Hydraulic fluids, Materials for aerospace construction, Geology. Meteorology. Hydrology, Powder metallurgy, Fluid storage devices, Burners. Boilers, Chipless working equipment, Power transmission and distribution networks, Textile machinery, Refrigerating technology, Components for electrical equipment, Organic chemicals, Electrical wires and cables, Radiation measurements, Refractories, Plastics, Vocabularies, Vacuum technology, Equipment for petroleum and natural gas industries, Protection against fire, Electrical accessories, Electrical equipment for working in special conditions, Occupational safety. Industrial hygiene, Radiation protection, Switchgear and controlgear, Electromechanical components for electronic and telecommunications equipment, Transport, Test conditions and procedures in general, Veterinary medicine, Rubber and plastics products, Industrial automation systems, Printed circuits and boards, Insulating materials, Electromagnetic compatibility (EMC), Electronic tubes, Hydraulic energy engineering, Hydraulic construction, Floor treatment appliances, Diagnostic, maintenance and test equipment, Pipeline components and pipelines, Road vehicle systems, Iron and steel products, Paints and varnishes, Raw materials for rubber and plastics, Insulation.
CZ-CSN, Syringe pump high pressure
Society of Automotive Engineers (SAE), Syringe pump high pressure
- SAE J1418-2002 Fuel Injection Pumps High Pressure Pipes (Tubing) for Testing
- SAE J1418-1995 FUEL INJECTION PUMPS—HIGH PRESSURE PIPES (TUBING) FOR TESTING
- SAE J1418-1987 Fuel Injection Pumps - High Pressure Pipes (Tubing) for Testing
- SAE AIR1092-1994 HIGH TENSION EXCITER OUTPUT VOLTAGE MEASUREMENT USING CATHODE-RAY OSCILLOSCOPE
- SAE AMS5917-2022 Metal Injection Molded Nickel Based Alloy 718 Parts Hot Isostatically Pressed, Solutioned and Aged
- SAE J1776-1989 DESIGN AND SPECIFICATION GUIDE FOR HYDRAULIC PUMPS USED ON ADVANCED SURFACE CRAFT AND SUBMERSIBLE VEHICLES
- SAE J1958-1995 DIESEL ENGINES—STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES (TUBING)
- SAE AMS5917-2011 Metal Injection Molded Nickel Based Alloy 718 Parts Hot Isostatically Pressed, Solution and Aged
- SAE J1958-2002 Diesel Engines - Steel Tubes for High-Pressure Fuel Injection Pipes (Tubing)
- SAE AMS2431/8A-2006 Peening Media (AWCH) Conditioned Carbon Steel Cut Wire Shot, High Hardness
SAE - SAE International, Syringe pump high pressure
- SAE J1418-2015 Fuel Injection Pumps - High Pressure Pipes (Tubing) for Testing
- SAE AS1225-1971 High Pressure Oxygen System Filler Valve
- SAE AMS3283-1998 Sealing Compound@ Polysulfide Non-Curing@ Groove Injection; Temperature and Fuel Resistant
- SAE AIR1092-1971 HIGH TENSION EXCITER OUTPUT VOLTAGE MEASUREMENT USING CATHODE-RAY OSCILLOSCOPE
- SAE HIR1514A-1989 DESIGN AND SPECIFICATION GUIDE FOR HYDRAULIC PUMPS USED ON ADVANCED SURFACE CRAFT AND SUBMERSIBLE VEHICLES
- SAE J1958-1989 Diesel Engines - Steel Tubes for High-Pressure Fuel Injection Pipes (Tubing)
- SAE J1958-2015 Diesel Engines - Steel Tubes for High-Pressure Fuel Injection Pipes (Tubing)
National Metrological Technical Specifications of the People's Republic of China, Syringe pump high pressure
- JJF 1259-2018 Calibration Specification for Syringe Pumps and Infusion Pumps
- JJF 1259-2010 Calibration Specification
for Syringe Pumps and Infusion Pumps
Japanese Industrial Standards Committee (JISC), Syringe pump high pressure
- JIS T 3256:2007 Infusion set for insulin pump
- JIS T 3256:2013 Infusion set for insulin pump
- JIS D 3651:2000 Diesel engines -- High-pressure fuel injection pipe assemblies -- General requirements and dimensions
- JIS D 3651:2016 Diesel engines -- High-pressure fuel injection pipe assemblies -- General requirements and dimensions
- JIS D 3603-2:2006 Diesel engines -- Mounting dimensions of fuel injection pumps -- Part 2: Base-mounted in-line pumps and high-pressure supply pumps for common rail fuel injection systems
- JIS D 3638:2005 Road vehicles -- Diesel engines -- Fuel injection pump testing -- Calibrating fuel injectors
- JIS C 3407:1987 High tension cables for X-ray apparatus
- JIS C 3407:2003 High voltage cables for X-ray apparatus
- JIS D 3611:2022 Direct injection gasoline engines -- Installation of the high pressure fuel pump to the engine
- JIS D 3603-4:2009 Diesel engines -- Mounting dimensions of fuel injection pumps -- Part 4: Flanges for end flange-mounting high-pressure supply pumps
- JIS Z 4702:1993 General requirements for high potential generators of medical X-ray apparatus
- JIS Z 4411:1993 Stabilized D.C. high voltage suppliers for radiation detection instruments
- JIS Z 4732:1993 High voltage cables with plugs for medical X-ray equipment
- JIS D 3607:1993 Automotive diesel engines -- Steel tubes for high-pressure fuel injection pipes
- JIS Z 4731:1982 High voltage cable plug and socket for medical X-ray equipment
British Standards Institution (BSI), Syringe pump high pressure
- BS EN ISO 7886-2:1996 Sterile hypodermic syringes for single use. Syringes for use with power-driven syringe pumps
- BS EN ISO 7886-2:2020 Sterile hypodermic syringes for single use - Syringes for use with power-driven syringe pumps
- BS ISO 4093:1999 Diesel engines. Fuel injection pumps. High-pressure pipes for testing
- 19/30380622 DC BS EN ISO 7886-2. Sterile hypodermic syringes for single use. Part 2. Syringes for use with power-driven syringe pumps
- BS ISO 7299-2:2009 Diesel engines - End-mounting flanges for pumps - High-pressure supply pumps for common rail fuel injection systems
- BS EN ISO 8362-4:2011 Injection containers and accessories. Injection vials made of moulded glass
- 18/30375513 DC BS EN 1829-1. Pumps. High-pressure water jet machines. Safety requirements. Part 1. Machines
- BS ISO 7299:1996 Diesel engines - End-mounting flanges for fuel injection pumps
- 21/30407259 DC BS ISO 13457. Agricultural irrigation equipment. Water-driven chemical injector pumps
- BS ISO 13457:2021 Tracked Changes. Agricultural irrigation equipment. Water-driven chemical injector pumps
- BS ISO 8535-1:1997 Compression ignition engines - Steel tubes for high pressure fuel injection pipes - Requirements for seamless cold drawn single wall tubes
- BS ISO 13296:1998 Diesel engines - High pressure fuel injection pipe assemblies - General requirements and dimensions
- BS ISO 7612:2010 Diesel engines. Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems. Mounting dimensions
- BS ISO 7612:2009 Diesel engines - Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems - Mounting dimensions
- BS ISO 7299-2:2021 Tracked Changes. Diesel engines. End-mounting flanges for pumps. High-pressure supply pumps for common rail fuel injection systems
- BS ISO 7612:2018 Tracked Changes. Diesel engines. Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems. Mounting dimensions
- 20/30385875 DC BS ISO 7299-2. Diesel engines. End-mounting flanges for pumps - Part 2. High-pressure supply pumps for common rail fuel injection systems
- BS ISO 8535-1:2011 Diesel engines. Steel tubes for high-pressure fuel injection pipes. Requirements for seamless colddrawn single-wall tubes
- BS ISO 4093:2000 Diesel engines - Fuel injection pumps - High-pressure pipes for testing
- 22/30458358 DC BS EN 63458-1. High Pressure Water Jet Machines. Safety - Part 1. High Pressure Water Jet Unit
- BS ISO 12165:2000 Tools for moulding - Components of compression and injection moulds and diecasting dies - Terms and symbols
- BS ISO 21042:2018 Gasoline engines with direct fuel injection (GDI engines). Installation of the high pressure fuel pump to the engine
- 17/30332768 DC BS ISO 21042. Gasoline engines with direct fuel injection (GDI engines). Installation of the high pressure fuel pump to the engine
- 22/30458366 DC BS EN 63458-3. High Pressure Water Jet Machines. Safety - Part 3. High Pressure Spraying Device
- BS EN 15182-4:2019 Portable equipment for projecting extinguishing agents supplied by firefighting pumps. Hand-held branchpipes for fire service use - High pressure branchpipes PN 40
- BS ISO 13948-2:2012 Diesel engines. Fuel injection pumps and fuel injector low-pressure connections. Non-threaded (push-on) connections
- BS ISO 13948-2:2016 Diesel engines. Fuel injection pumps and fuel injector low-pressure connections. Non-threaded (push-on) connections
- 22/30458362 DC BS EN 63458-2. High Pressure Water Jet Machines. Safety - Part 2. High Pressure hoses, hose lines and connectors
- BS ISO 7876-4:2005 Fuel injection equipment - Vocabulary - High-pressure pipes and end-connections
- BS ISO 7876-4:2004 Fuel injection equipment. Vocabulary - High-pressure pipes and end-connections
Association Francaise de Normalisation, Syringe pump high pressure
- NF S93-001-2:1997 Sterile hypodermic syringes for single use. Part 2 : syringes for use with power-driven syringe pumps.
- NF EN ISO 7886-2:2020 Seringues hypodermiques stériles, non réutilisables - Partie 2 : seringues pour pousse-seringues électriques
- NF R16-317:1987 Road vehicles. Fuel injection pumps. High-pressure pipes for testing.
- NF S93-001-2*NF EN ISO 7886-2:2020 Sterile hypodermic syringes for single use - Part 2 : syringes for use with power-driven syringe pumps
- NF S93-113:1993 Injection containers for injectables and accessories. Part 4 : injection vials made of moulded glass.
- NF R16-202:1997 Moteurs diesels - Raccords finaux à cône femelle de 60 degrés pour lignes d'injection de combustible haute pression
- NF E63-526*NF ISO 28238:2010 Compression and injection moulds - Components for gating systems
- NF S61-820-4*NF EN 15182-4:2019 Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Hand-held branchpipes for fire service use - Part 4 : high pressure branchpipes PN 40
- NF E48-618:1973 Fluids for hydraulic power systems. Determination of ignitability offire-resistant fluids atomized under high pressure with screen.
- NF EN 1829-1:2021 Machines à jet d'eau à haute pression - Exigences de sécurité - Partie 1 : machines
- NF EN ISO 8655-9:2022 Appareils volumétriques à piston - Partie 9 : seringues de laboratoire haute précision pour utilisation manuelle
- NF EN 15182-4:2019 Équipement portable de projection d'agents d'extinction alimenté par des pompes à usage incendie - Lances à main destinées aux services d'incendie et de secours - Partie 4 : lances haute pression PN 40
- NF C74-166*NF EN 60526:2005 High-voltage cable plug and socket connections for medical X-ray equipment
German Institute for Standardization, Syringe pump high pressure
- DIN EN ISO 7886-2:1997 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:1997); German version EN ISO 7886-2:1997
- DIN EN ISO 7886-2:2020-10 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:2020); German version EN ISO 7886-2:2020
- DIN EN ISO 7886-2:2020 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:2020)
- DIN EN ISO 8362-4:2011-12 Injection containers and accessories - Part 4: Injection vials made of moulded glass (ISO 8362-4:2011); German version EN ISO 8362-4:2011
- DIN 73365-3:1970-01 Injection pumps for Diesel engines; pressure pipe connections
- DIN ISO 28238:2012 Compression and injection moulds - Components for gating systems (ISO 28238:2010)
- DIN 16760-1:1990 Compression, injection and die-casting moulds; machined plates, undrilled
- DIN 28427:1983-02 Vacuum technology; acceptance specifications for diffusions pumps and vapour jet vacuum pumps for vapour pressures of the pump fluid <1 mbar
- DIN 46264:1988 High-voltage feed-through terminals with cast resin insulator
- DIN 73365-3:1970 Injection pumps for Diesel engines; pressure pipe connections
- DIN EN 60601-2-24:1999 Medical electrical equipment - Part 2-24: Particular requirements for the safety of infusion pumps and controllers (IEC 60601-2-24:1998); German version EN 60601-2-24:1998
- DIN EN ISO 8871-1:2004-11 Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 1: Extractables in aqueous autoclavates (ISO 8871-1:2003); German version EN ISO 8871-1:2004, text in German and English
- DIN EN ISO 8362-4:2011 Injection containers and accessories - Part 4: Injection vials made of moulded glass (ISO 8362-4:2011); German version EN ISO 8362-4:2011
- DIN 16749:1986 Compression moulds and injection moulds; dimensional tolerances for moulding parts
- DIN 28427:1983 Vacuum technology; acceptance specifications for diffusions pumps and vapour jet vacuum pumps for vapour pressures of the pump fluid 1 mbar
- DIN EN 15182-4:2019 Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Hand-held branchpipes for fire service use - Part 4: High pressure branchpipes PN 40
- DIN 28430:2017 Vacuum technology - Rules for the measurement of steam jet vacuum pumps and steam jet compressors - Motive fluid: steam
- DIN 28430:2023-02 Vacuum technology - Rules for the measurement of steam jet vacuum pumps and steam jet compressors - Motive fluid: steam / Note: Date of issue 2023-01-06*Intended as replacement for DIN 28430 (2017-06).
- DIN 28430:2017-06 Vacuum technology - Rules for the measurement of steam jet vacuum pumps and steam jet compressors - Motive fluid: steam / Note: To be replaced by DIN 28430 (2023-02).
- DIN EN 16830:2017-06 Vacuum technology - Rules for the measurement of steam jet vacuum pumps and steam jet compressors - Motive fluid: steam / Note: To be replaced by DIN 28430 (2023-02).
- DIN 28430:2023-09 Vacuum technology - Rules for the measurement of steam jet vacuum pumps and steam jet compressors - Motive fluid: steam
- DIN EN 15182-4:2019-11 Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Hand-held branchpipes for fire service use - Part 4: High pressure branchpipes PN 40; German version EN 15182-4:2019
- DIN EN 1829-1:2021-04 High-pressure water jet machines - Safety requirements - Part 1: Machines; German version EN 1829-1:2021
- DIN 28430:1984 Vacuum technology; rules for the measurement of steam jet vacuum pumps and steam jet compressors using steam as the working fluid
Professional Standard - Chemical Industry, Syringe pump high pressure
- HG/T 20691-2017 Technical code for jet grouting construction
- HG/T 20691-2006 Regulations for operative technique of high pressure's spurtal pour thick liquid construction
Group Standards of the People's Republic of China, Syringe pump high pressure
- T/SXNA 001-2018 Using standards for Syringe Pumps and Infusion Pumps
- T/CECS 1290-2023 Ultra-high pressure jet grouting (N-Jet method) technical regulations
- T/CECS 892-2021 Technical specifications for down-the-hole impact high-pressure jet grouting piles
- T/SSCE 0003-2022 N-Jet construction method ultra-high pressure jet grouting technical regulations
- T/CEEIA 284-2017 Specification for vertical high-temperature and high-pressure shielded electric pump(lower pump)
- T/ZZB 2819-2022 High pressure ammonia centrifugal pump
- T/HIS 012-2022 Digital ultra-high pressure oil pump
- T/CPMIA 0103-2021 High-speed precision plastic injection moulding machines
- T/NBSJ 001-2019 High-speed precision plastic injection moulding machine
- T/ZZB 0326-2018 High-speed precision plastic injection moulding machine
- T/CSBME 061-2022
- T/ZSA 118-2022 Technical specifications for rust removal robots with ultra-high pressure water jet
- T/CPCA 4107-2018 High reflective copper clad laminates for printed circuit board
- T/CEC 522-2021 Guidelines for Selection of Epoxy Resin Compounds for Pouring High Voltage Potty Insulators
国家食品药品监督管理局, Syringe pump high pressure
- YY/T 0573.2-2018 Single use sterile syringes Part 2: Syringes for power driven syringe pumps
- YY/T 0614-2017 Disposable high-pressure contrast syringes and accessories
- YY/T 0614-2007 Disposable high-pressure contrast syringes and accessories
卫生健康委员会, Syringe pump high pressure
- WS/T 657-2019 Safety management of medical infusion pumps and medical injection pumps
Hubei Provincial Standard of the People's Republic of China, Syringe pump high pressure
Korean Agency for Technology and Standards (KATS), Syringe pump high pressure
- KS R ISO 4093-2008(2018) Diesel engines-Fuel injection pumps-High-pressure pipes for testing
- KS R ISO 7612:2015 Diesel engines — Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems — Mounting dimensions
- KS R ISO 7612:2010 Diesel engines-Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems-Mounting dimensions
- KS R ISO 7612:2020 Diesel engines — Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems — Mounting dimensions
- KS B 6201-2002(2017) Pressure injection burners
- KS R ISO 4093:2008 Diesel engines-Fuel injection pumps-High-pressure pipes for testing
- KS B 6200-2002 High pressure atomizing injection burners
- KS B 6200-2002(2017) High pressure atomizing injection burners
- KS B 6200-2002(2022) High pressure atomizing injection burners
- KS C 3612-2008(2018) High tension cables for X-ray apparatus
- KS B 6200-1982 High pressure atomizing injection burners
- KS C 3612-1987 High tension cables for X-ray apparatus
- KS C 3612-2008 High tension cables for X-ray apparatus
- KS A 4031-1995 Stabilized D.C.high voltage suppliers for radiation detection instruments
- KS B ISO 12165-2002(2017) Tools for moulding-Components of compression and injection moulds and diecasting dies-Terms and symbols
- KS P ISO 8871-1:2021 Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 1: Extractables in aqueous autoclavates
- KS B ISO 15873:2022 Irrigation equipment — Differential pressure Venturi-type liquid additive injectors
- KS R 3044-2008 Automotive diesel engines-Steel tubes for high-pressure fuel injection pipes
- KS R ISO 13948-1:2007 Diesel engines-Fuel injection pumps and fuel injector low-pressure connections-Part 1:Threaded connections
- KS R ISO 13948-1:2017 Diesel engines — Fuel injection pumps and fuel injector lowpressure connections — Part 1: Threaded connections
- KS A 4723-1996(2016) High voltage cables with plugs for medical X-ray equipment
- KS A 4723-1996 High voltage cables with plugs for medical X-ray equipment
- KS C IEC 60601-2-7-2002(2012) High-voltage generators of diagnostic X-ray generators
- KS R ISO 13948-2:2005 Diesel engines-Fuel injection pumps and fuel injector low-pressure connections-Part 2:Non-threaded(push-on) connections
- KS R ISO 13948-2:2020 Diesel engines — Fuel injection pumps and fuel injector low-pressure connections — Part 2: Non-threaded(push-on) connections
- KS R ISO 13948-2:2015 Diesel engines-Fuel injection pumps and fuel injector low-pressure connections-Part 2:Non-threaded(push-on) connections
- KS A 4722-1996 High voltage cable plug and socket for medical X-ray equipment
- KS A 4723-1996(2021) High voltage cables with plugs for medical X-ray equipment
- KS A 4722-1996(2016) High voltage cable plug and socket for medical X-ray equipment
Professional Standard - Machinery, Syringe pump high pressure
- JB/T 6909-2014 Ultra-high pressure pump
- JB/T 6909-1993 Super high pressure pump
- JB/T 7554-2007 Manuol super-high-prossure oil pump
- JB/T 7554-1994 Manual super high pressure oil pump
- JB/T 8059-2008 Technical specincation for high pressure boiler feed pump
- JB/T 8059-1996 High-pressure boiler feed water pump technical conditions
- JB/T 8543-2015 Nondestructive testing method for pump parts.Radiographic testing method compression steel casting for pump
- JB/T 8093-1999 High pressure water jet equipment
- JB/T 53291-1999 High-pressure boiler feed water pump product quality classification
- JB/T 12011-2014 High voltage mutual inductor vacuum drying & filling plant
- JB/T 8121-1999 High pressure pipe assemblies for diesel fuel injection pump test bench
- JB/T 8121-2011 Diesel fuel injection pump test bench high pressure pipe assemblies
- JB/T 10869-2008 Medium to large size, low and highVoltage submersible-pumps motor (Frame from 315~710)
- JB/T 8543.1-1997 Non-destructive testing for parts of pump - Radiographic testing techniques for pressure steel castings of pump and classification of negative plates
- JB/T 10412-2004 XN (W) High pressure water jet steel- pipe line cleaning equipment
- JB/T 8526-1997 Safety specification for the use of manually operated high pressure waterjet equipment
- JB/T 12307-2015 Specification of YBBZ series high-voltage flameproof three-phases asynchronous motor for pump station
- JB/T 6916-1993 In-service high pressure cylinder - Checking and assessment method of acoustic emission
International Organization for Standardization (ISO), Syringe pump high pressure
- ISO 7886-2:2020 Sterile hypodermic syringes for single use — Part 2: Syringes for use with power-driven syringe pumps
- ISO 7886-2:1996 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps
- ISO 4093:1978 Road vehicles — Fuel injection pumps — High pressure pipes for testing
- ISO 7612:2009 Diesel engines - Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems - Mounting dimensions
- ISO 7299-2:2009 Diesel engines - End-mounting flanges for pumps - Part 2: High-pressure supply pumps for common rail fuel injection systems
- ISO 7299-2:2021 Diesel engines - End-mounting flanges for pumps - Part 2: High-pressure supply pumps for common rail fuel injection systems
- ISO 28238:2010 Compression and injection moulds - Components for gating systems
- ISO 4093:1986 Road vehicles; Fuel injection pumps; High-pressure pipes for testing
- ISO 4093:1999 Diesel engines - Fuel injection pumps - High-pressure pipes for testing
- ISO 21042:2018 Gasoline engines with direct fuel injection (GDI engines) - Installation of the high pressure fuel pump to the engine
- ISO 13948-1:2000 Diesel engines - Fuel injection pumps and fuel injector low-pressure connections - Part 1: Threaded connections
- ISO 13948-1:2015 Diesel engines - Fuel injection pumps and fuel injector low-pressure connections - Part 1: Threaded connections
- ISO 12165:2019 Tools for moulding — Components of compression and injection moulds and diecasting dies — List of equivalent terms and symbols
- ISO 13948-2:2012 Diesel engines - Fuel injection pumps and fuel injector low-pressure connections - Part 2: Non-threaded (push-on) connections
- ISO 13948-2:2000 Diesel engines - Fuel injection pumps and fuel injector low-pressure connections - Part 2: Non-threaded (push-on) connections
- ISO 13948-2:2016 Diesel engines - Fuel injection pumps and fuel injector low-pressure connections - Part 2: Non-threaded (push-on) connections
- ISO 2974:2016 Diesel engines - 60° female cones for high-pressure fuel injection components
- ISO 16925:2021 Paints and varnishes — Determination of the resistance of coatings to pressure water-jetting
- ISO 2974:2018 Diesel engines - 60° female cones for high-pressure fuel injection components
National Metrological Verification Regulations of the People's Republic of China, Syringe pump high pressure
European Committee for Standardization (CEN), Syringe pump high pressure
- EN ISO 7886-2:2020 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:2020)
- EN ISO 7886-2:1997 Sterile Hypodermic Syringes for Single Use - Part 2: Syringes for Use with Power-Driven Syringe Pumps
- EN 28362-4:1993 Injection Containers for Injectables and Accessories - Part 4: Injection Vials Made of Moulded Glass (ISO 8362-4 : 1989)
- prEN 28362-4-1992 Injection containers for injectables and accesssories; part 4: injection vials made of moulded glass (ISO 8362-4:1989)
- EN ISO 8362-4:2011 Injection containers and accessories - Part 4: Injection vials made of moulded glass
Professional Standard - Light Industry, Syringe pump high pressure
ES-UNE, Syringe pump high pressure
- UNE-EN ISO 7886-2:2020 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:2020)
- UNE-EN 15182-4:2021 Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Hand-held branchpipes for fire service use - Part 4: High pressure branchpipes PN 40
- UNE-EN 1829-1:2021 High-pressure water jet machines - Safety requirements - Part 1: Machines
Professional Standard - Medicine, Syringe pump high pressure
- YY 0614-2007 Single-use higy-pressure angiographic stringes and accessories
- YY/T 0891-2013 Particular specifications for angiographic injector
ES-AENOR, Syringe pump high pressure
Danish Standards Foundation, Syringe pump high pressure
- DS/EN ISO 7886-2:1998 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps
- DS/ISO 8362-4:1993 Injection containers for injectables and accessories. Part 4: Injection vials made of moulded glass
- DS/EN 28362-4:1993 Injection containers for injectables and accessories. Part 4: Injection vials made of moulded glass
- DS/EN ISO 8871-1:2005 Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 1: Extractables in aqueous autoclavates
- DS/IEC 141-4:1992 Tests on oil-filled and gas-pressure cables and their accessories - Part 4: Oil-impregnated paper-insulated high pressure oil-filled pipetype cables and accessories for alternating voltages up to and including 400 kV
- DS/EN 1829-1:2010 High pressure water jet machines - Safety requirements - Part 1: Machines
- DS/EN 50089/A1:2005 Cast resin partitions for metal enclosed gas-filled high-voltage switchgear and controlgear
IT-UNI, Syringe pump high pressure
- UNI EN ISO 7886-2:2021 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps
- UNI EN 1829-1-2021 High-pressure water jet machines - Safety requirements - Part 1: Machines
GOSTR, Syringe pump high pressure
- GOST R ISO 7886-2-2017 Sterile hypodermic syringes for single use. Part 2. Syringes for use with power-driven syringe pumps
KR-KS, Syringe pump high pressure
- KS P ISO 7886-2-2022 Sterile hypodermic syringes for single use — Part 2: Syringes for use with power-driven syringe pumps
- KS R ISO 7612-2020 Diesel engines — Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems — Mounting dimensions
- KS C 3612-2008(2023) High tension cables for X-ray apparatus
- KS B ISO 12165-2022 Tools for moulding — Components of compression and injection moulds and diecasting dies — Terms and symbols
- KS P ISO 8871-1-2021 Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 1: Extractables in aqueous autoclavates
- KS B ISO 15873-2022 Irrigation equipment — Differential pressure Venturi-type liquid additive injectors
- KS R ISO 13948-2-2020 Diesel engines — Fuel injection pumps and fuel injector low-pressure connections — Part 2: Non-threaded(push-on) connections
- KS P ISO 8536-9-2017 Infusion equipment for medical use-Part 9:Fluid lines for use with pressure infusion equipment
AENOR, Syringe pump high pressure
- UNE 10101:1990 INTERNAL COMBUSTION ENGINER. FUEL INJECTION PUMPS. HIGH PRESSURE PIPES FOR TESTING.
- UNE-EN ISO 7886-2:1998 STERILE HYPODERMIC SYRINGES FOR SINGLE USE. PART 2: SYRINGES FOR USE WITH POWER-DRIVEN SYRINGE PUMPS. (ISO 7886-2:1996).
- UNE-EN ISO 8871-1:2005 Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 1: Extractables in aqueous autoclavates (ISO 8871-1:2003)
- UNE-EN 1829-1:2010 High pressure water jet machines - Safety requirements - Part 1: Machines
Lithuanian Standards Office , Syringe pump high pressure
- LST EN ISO 7886-2:2001 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:1996)
- LST EN ISO 8871-1:2004 Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 1: Extractables in aqueous autoclavates (ISO 8871-1:2003)
- LST EN 1829-1-2021 High-pressure water jet machines - Safety requirements - Part 1: Machines
- LST EN 1829-1-2010 High pressure water jet machines - Safety requirements - Part 1: Machines
- LST EN 50089+A1-2001 Cast resin partitions for metal enclosed gas-filled high-voltage switchgear and controlgear
CH-SNV, Syringe pump high pressure
- SN EN ISO 7886-2:2020 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:2020)
Indonesia Standards, Syringe pump high pressure
- SNI 16-7010.2-2004 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps
AR-IRAM, Syringe pump high pressure
U.S. Military Regulations and Norms, Syringe pump high pressure
PL-PKN, Syringe pump high pressure
- PN-EN ISO 7886-2-2020-11 E Sterile hypodermic syringes for single use -- Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:2020)
- PN-EN 1829-1-2021-06 E High-pressure water jet machines -- Safety requirements -- Part 1: Machines
Military Standards (MIL-STD), Syringe pump high pressure
Professional Standard - Energy, Syringe pump high pressure
- NB/T 20163-2012 Qualification procedure for containment spray pump and low head safety injection pump of pressurized water reactor nuclear power plant
- NB/T 10750-2021
RU-GOST R, Syringe pump high pressure
- GOST R 57504-2017 Medical devices. Syringe pumps. Technical requirements for governmental purchases
- GOST R 57905-2017 Diesel Engines. Base-mounted in-line fuil injection pumps and high-pressure supply pumps for common rail fuel injection systems. Mounting dimensions
- GOST 15060-1995 Motor and tractor diesels. Fuel pumps for high pressure. External and mounting dimensions
- GOST 15060-1977 Motor and tractor diesels. Fuel pumps for high pressure. External and allied dimensions
- GOST 21011.7-1980 High-voltage kenotrons. The emission current measurement method
IN-BIS, Syringe pump high pressure
工业和信息化部/国家能源局, Syringe pump high pressure
Professional Standard - Pharmaceutical Packaging, Syringe pump high pressure
Professional Standard-Ships, Syringe pump high pressure
GM Europe, Syringe pump high pressure
- GME QE 001225-1996 Elastomer f黵 Dichtungen Wascherpumpe / Hochdruckpumpe Elastomer for Gaskets Washer Pump/High Pressure Pump English/German
Professional Standard - Petrochemical Industry, Syringe pump high pressure
- NB/SH/T 0846-2010 Test method for evaluating performance of hydraulic oil in high pressure piston type pump
- SH/T 0787-2006 Standard test method for indicating wear characteristics of petroleum hydraulic fluids in a high pressure constant volume vane pump
Professional Standard - Agriculture, Syringe pump high pressure
- 2587药典 二部-2015 The second part of high technetium [99mTc] acid sodium injection
- 2695药典 二部-2020 The second part of high technetium [99mTc] acid sodium injection
- 433药典 二部-2010 The first part six paintings of digoxin injection
- 1520药典 二部-2010 The first part ten pictures of high technetium [99mTc] sodium injection
- 1861药典 二部-2015 Part 1 Ten Drawings Homoharringtonine Injection
- 1947药典 二部-2020 Part 1 Ten Drawings Homoharringtonine Injection
- 1519药典 二部-2010 Part 1 Ten Drawings Homoharringtonine Injection
- 2548药典 二部-2020 Desmopressin for Injection, Part 15
- 147兽药产品说明书范本第一册-2013 Shihua Yanen Oxygen Ammonia Times High Tobacco Alcohol Niacinamide Injection Instructions
- 142兽药产品说明书范本第一册-2013 Instructions for Shihua Yanen Oxygen Ammonia Times High Tobacco Alcohol Aminophylline Injection
- 2444药典 二部-2015 Part 15: Desmopressin Acetate Injection
- 2547药典 二部-2020 Part 15: Desmopressin Acetate Injection
- 136兽药产品说明书范本第一册-2013 Instructions for Ten-drawing Salt En Oxygen Ammonia Times High Tobacco and Alcohol Enrofloxacin Injection
- 140兽药产品说明书范本第一册-2013 Instructions for Ampicillin Sodium for Shihua Yanen Oxygen Double High Tobacco and Alcohol Injection
- 123兽药产品说明书范本第一册-2013 Shihua Yanen Oxygen Ammonium Double High Tobacco Alcohol Pethidine Hydrochloride Injection Instructions
- 127兽药产品说明书范本第一册-2013 Shihua Yanen Oxygen Ammonium Double High Tobacco Alcohol Chlorpromazine Hydrochloride Injection Instructions
- 118兽药产品说明书范本第一册-2013 Shihua Yanen Oxygen Ammonium Double High Tobacco Alcohol Promethazine Hydrochloride Injection Instructions
- 130兽药产品说明书范本第一册-2013 Shihua Yanen Oxygen Double High Tobacco Alcohol Ketamine Hydrochloride Injection Instructions
- 110兽药产品说明书范本第一册-2013 Shihua Yanen Oxygen Ammonium Times High Tobacco Alcohol Injection Oxytetracycline Hydrochloride Instructions
- 115兽药产品说明书范本第一册-2013 Instructions for Tetracycline Hydrochloride for Injection of Shihua Yanen Oxygen Ammonia Times High Tobacco and Alcohol
- 133兽药产品说明书范本第一册-2013 Shihua Yan En Oxygen Ammonium Times High Tobacco Alcohol Xylazine Hydrochloride Injection Instructions
- 132兽药产品说明书范本第一册-2013 Instructions for Shihua Yanen Oxygen Ammonia Times High Tobacco Alcohol Xylazol Hydrochloride Injection
- 119兽药产品说明书范本第一册-2013 Shihua Yanen Oxygen Ammonia Times High Tobacco Alcohol Lidocaine Hydrochloride Injection Instructions
- 120兽药产品说明书范本第一册-2013 Shihua Yanen Oxygen Ammonium Times High Tobacco Alcohol Diphenhydramine Hydrochloride Injection Instructions
- 143兽药产品说明书范本第一册-2013 Shihua Yanen Oxygen Ammonia Times High Tobacco Alcohol Compound Aminopyrine Injection Instructions
- 131兽药产品说明书范本第一册-2013 Shihua Yan En Oxygen Double High Tobacco Alcohol Procaine Hydrochloride Injection Instructions
- 114兽药产品说明书范本第一册-2013 Shihua Yanen Oxygen Ammonium Double High Tobacco Alcohol Levamisole Hydrochloride Injection Instructions
- 122兽药产品说明书范本第一册-2013 Shihua Yanen Oxygen Double High Tobacco Alcohol Lincomycin Hydrochloride Injection Instructions
- 150兽药产品说明书范本第一册-2013 Instructions for Tylosin Tartrate for Injection of Salt, En, Oxygen, and Ammonium
CEN - European Committee for Standardization, Syringe pump high pressure
- EN ISO 8362-4:2004 Injection containers and accessories - Part 4: Injection vials made of moulded glass
- PREN 15182-4-2018 Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Hand-held branchpipes for fire service use - Part 4: High pressure branchpipes PN 40
- PREN 1829-1-2018 High-pressure water jet machines - Safety requirements - Part 1: Machines
Professional Standard - Ocean, Syringe pump high pressure
- HY/T 109-2008 Technical specifications for high-pressure pump in reverse osmosis plant
GM Daewoo, Syringe pump high pressure
工业和信息化部, Syringe pump high pressure
- JB/T 8059-2020 High pressure boiler feed water pump technical conditions
- JB/T 14078-2021 Medium and high pressure gear pumps for agricultural and forestry tractors
- YS/T 1026-2015 Metal injection molding high specific gravity tungsten alloy pellets
- JB/T 14063-2022 Fully enclosed scroll refrigerant compressor for high temperature heat pumps
- JB/T 14175-2022 Diesel engine electronically controlled common rail system high-pressure fuel supply pump test bench
- JB/T 10716-2020 Installation dimensions of flat bottom bracket for diesel engine in-line fuel injection pump and high-pressure fuel supply pump for common rail system
- JB/T 13620.6-2018 Plastic injection mold hot runner system components Part 6: Pressure-bearing gasket
- YB/T 4802-2020 High-pressure water jet sandblasting (shot) cleaning device for steel surface
- JB/T 10715.2-2020 Diesel engine end flange installation dimensions Part 2: High-pressure fuel supply pump for common rail system
Professional Standard - Non-ferrous Metal, Syringe pump high pressure
Professional Standard - Ferrous Metallurgy, Syringe pump high pressure
- YBJ 43-1992 High pressure rotary jet grouting technical specification
- YB/T 2208-1998 Test method for crushing strength of castable refractory at elevated temperature
GM North America, Syringe pump high pressure
CU-NC, Syringe pump high pressure
- NC 26-75-22-1986 Drugs. Hypertonic Sodium Chloride Injection. Quality Specifications
SE-SIS, Syringe pump high pressure
Professional Standard - Electricity, Syringe pump high pressure
- DL/T 994-2006 High voltage variable frequency drive used in draft fan and pump of power plant
- DL/T 5200-2004 Technical specification of jet grouting for hydropower and water resources projects
- DL/T 5200-2004(条文说明) Technical specification of jet grouting for hydropower and water resources projects(explanation)
- DL/T 5200-2019 Technical specifications for high-pressure jet grouting in hydropower and water conservancy projects
RO-ASRO, Syringe pump high pressure
- STAS 9009/1-1983 Oil equipment HIGH DUTY MUD PUMPS Main parameters
- STAS 9421-1987 Compression ignition engines S SIZE INJECTION NOZZLES Dimensions
- STAS 9009/2-1982 Oil equipment HIGH DUTY MUD PUMPS Technical requirements for quality
- STAS 9471-1985 Compression ignition engines fuel injection pumps in line; size a Overall and mating dimensions
Professional Standard - Textile, Syringe pump high pressure
- FZ/T 95027-2019 High temperature and high pressure jet overflow dyeing machine
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Syringe pump high pressure
- GB/T 25861-2010 Water-source high temperature heat pumps using the vapor compression cycle
- GB/T 25861-2023 Vapor compression cycle water source high temperature heat pump unit
- GB/T 25368-2023 Diesel engine electronically controlled common rail system high-pressure fuel supply pump assembly
- GB/T 2353-2005 Dimension series and identification code for mounting flanges and shaft ends of hydraulic pumps and motors
- GB 15166.3-1994 Alternating-current high-voltage fuses. Expulsion fuse
- GB 26148-2010 Safety specification for the use of manually operated high pressure waterjet equipment
- GB/T 26148-2010 Safety specification for the use of manually operated high pressure waterjet equipment
- GB/T 12272-1990 Measuring method of radio-frequency high potential withstanding voltage for radio-frequency coaxial connectors
- GB 12272-1990 RF coaxial connector resistance to RF high potential voltage test method
- GB 20826-2007 Code of safety for the use of high pressure water jetting operation by divers
- GB/T 43142-2023 Ultra-high pressure water jet ship rust removal complete equipment
- GB/T 25368-2010 Electronic control common rail fuel injection system for diesel engines.The high-pressure supply pump.Specifications
- GB/Z 17625.13-2020 Electromagnetic compatibility—Limits—Assessment of emission limits for the connection of unbalanced installations to MV,HV and EHV power systems
- GB/T 15166.3-2023 High Voltage AC Fuses Part 3: Jet Fuses
- GB/T 15166.3-2008 High-voltage alternating-current fuses-Part 3: Expulsion fuses
- GB/T 15166.3-2008 High-voltage alternating-current fuses-Part 3: Expulsion fuses
- GB/T 43123-2023 Ship and Offshore Technology LNG Gas Supply System (FGSS) High Pressure Pump Performance Test Requirements
- GB 5579-1985 High-voltage cable plug and socket connections for medical X-ray equipment
未注明发布机构, Syringe pump high pressure
- BS 3T 51:1945(2000) Specification for Aircraft Material High pressure seamless copper tubes NOTE
- GJB 8774-2015 General specifications for ultra-high pressure water jet rust removal equipment for ships
American Society for Testing and Materials (ASTM), Syringe pump high pressure
- ASTM D6100-11 Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)
- ASTM D6100-17 Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)
- ASTM D4101-07 Standard Specification for Polypropylene Injection and Extrusion Materials
- ASTM D4203-07 Standard Specification for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials
- ASTM D2133-66(1972) Standard Specification For Acetal Resin Injection Molding And Extrusion Materials
- ASTM D2133-81 Standard Specification For Acetal Resin Injection Molding And Extrusion Materials
- ASTM D6973-04 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
- ASTM D6973-04e1 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
- ASTM D6973-05 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
- ASTM D6973-03 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
- ASTM D6973-08e1 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
- ASTM D6973-14 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
- ASTM D7292-18 Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)
- ASTM D6100-03 Standard Specification for Extruded, Compression Molded and Injection Molded Acetal Shapes (POM)
- ASTM D6973-08 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
- ASTM D6973-14(2019) Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
- ASTM D6973-14(2019)e1 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
- ASTM D5990-20 Standard Classification System and Basis for Polyketone Injection Molding and Extrusion Materials (PK)
- ASTM D5990-20a Standard Classification System and Basis for Polyketone Injection Molding and Extrusion Materials (PK)
- ASTM D4203-12 Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials
- ASTM D5857-10 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology
- ASTM D6262-17 Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)
ESDU - Engineering Sciences Data Unit, Syringe pump high pressure
- ESDU 85032-1985 EJECTORS AND JET PUMPS - DESIGN AND PERFORMANCE FOR INCOMPRESSIBLE LIQUID FLOW
- ESDU 85032 A-2007 Ejectors and jet pumps. Design and performance for incompressible liquid flow.
- ESDU 92042 B-2011 Ejectors and jet pumps: Computer program for design and performance for compressible gas flow
- ESDU 92042-1992 EJECTORS AND JET PUMPS Computer Program for Design and Performance for Compressible Gas Flow
- ESDU 92042 B-2007 Ejectors and jet pumps: computer program for design and performance for compressible gas flow.
GB-REG, Syringe pump high pressure
Professional Standard - Petroleum, Syringe pump high pressure
- SY/T 5270-2000 Technical regulation of design for high pressure water injection fittings
- SY/T 6311-2012 The technical requirements of high temperature & high pressure three-dimensional scaled physical modeling experiment for steam recovery
- SY 6311-2012 Technical requirements for high temperature and high pressure three-dimensional proportional physical simulation experiment of steam injection oil recovery
能源部, Syringe pump high pressure
- SY 5270-1991 Technical regulations for the design of high-pressure water injection pipeline accessories
American National Standards Institute (ANSI), Syringe pump high pressure
- ANSI/ASTM D4203:2000 Specification for Styrene Acrylonitrile (SAN) Injection and Extrusion Materials (08.02)
- ANSI C37.85-2002 Interrupters Used in Power Switchgear, X-Radiation Limits for AC High-Voltage Power Vacuum
AT-ON, Syringe pump high pressure
- ONORM EN 28362-4-1994 Injection containers for injectables and accessories. Part 4: Injection vials made of moulded glass (ISO 8362-4:1989)
- ONORM M 4520-1978 Explosive-actuated ram-tool without piston (shot-ram); test requirements; safety
- ONORM B 2275-2002 Jet grouting works - Works contract
Taiwan Provincial Standard of the People's Republic of China, Syringe pump high pressure
Professional Standard - Coal, Syringe pump high pressure
- MT 91-1984 Test specification for high pressure filter used in coal mine emulsion pumping station
Professional Standard - Aviation, Syringe pump high pressure
- HB/Z 175-1990 High pressure water-jet cutting composite materials
Standard Association of Australia (SAA), Syringe pump high pressure
BR-ABNT, Syringe pump high pressure
Professional Standard - Construction Industry, Syringe pump high pressure
- JGJ/T 282-2012 Technical specification for underreamed anchor by jet grouting
机械工业部, Syringe pump high pressure
- JB 8526-1997 Safety regulations for high-pressure water jet cleaning operations
VN-TCVN, Syringe pump high pressure
- TCVN 5424-1991 Automobile and tractor diesel engines.Fuel pums for hight pressure.Gennaral technical conditions
- TCVN 5423-1991 Automobile and tractor diesel engines.Fuel pums for hight pressure.External and allied dimensions
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Syringe pump high pressure
- ASHRAE LO-09-091-2009 Emerging Applications in Cryogenics-Nitrogen Injection for Reservoir Enhanced Oil Recovery
GM Global, Syringe pump high pressure
- GMW 16619-2011 Headlamp Washer Systems High Pressure Pump Issue 1; English
- GMW 16720-2012 Polyethylene - Linear Ultra High Molecular Weight, Ram Extrusion Issue 1; English
国家市场监督管理总局、中国国家标准化管理委员会, Syringe pump high pressure
- GB 20826-2021 Code of safety for the use of high pressure water jetting equipment by divers
国家能源局, Syringe pump high pressure
Professional Standard - Nuclear Industry, Syringe pump high pressure
- EJ/T 20158-2018 Requirements for decontamination of low- and medium-level radioactive solid waste by high-pressure water jetting
Shandong Provincial Standard of the People's Republic of China, Syringe pump high pressure
- DB37/T 3609-2019 Determination of Sulfa Drugs in Enrofloxacin Injection—High Performance Liquid Chromatography
- DB37/T 3610-2019 Determination of Acetyl Mequin and Salicylic Acid in Enrofloxacin Injection - High Performance Liquid Chromatography
- DB37/T 3751-2019 High performance liquid chromatography for the detection of acetaminophen and analgin in Banlangen injection
International Electrotechnical Commission (IEC), Syringe pump high pressure
NL-NEN, Syringe pump high pressure
Professional Standard - Railway, Syringe pump high pressure
- TB/T 2584-1995 Specifications for high-pressure fuel pipe assemblies for diesel engine fuel injection pump test benches for diesel locomotives
United States Navy, Syringe pump high pressure
- NAVY MIL-F-20627 B (3)-1983 FILTER ASSEMBLY AND FILTER ELEMENTS, FLUID PRESSURE (FOR ENGINES WITH LIQUID FUEL INJECTION SYSTEMS)
- NAVY MIL-F-20627 B-1962 FILTER ASSEMBLY AND FILTER ELEMENTS, FLUID PRESSURE (FOR ENGINES WITH LIQUID FUEL INJECTION SYSTEMS)
Military Standard of the People's Republic of China-General Armament Department, Syringe pump high pressure
- GJB 5251-2003 General specifications for ultra-high pressure water jet rust removal equipment for ships
(U.S.) Ford Automotive Standards, Syringe pump high pressure
- FORD ESB-M2D348-A3-2004 POLYURETHANE ELASTOMER, REACTION INJECTION MOLDED (RIM) - HIGH FLEXURAL MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***