ZH
RU
ES
Syringe pump sample
Syringe pump sample, Total:134 items.
In the international standard classification, Syringe pump sample involves: Medical equipment, Medical sciences and health care facilities in general, Air quality, Internal combustion engines for road vehicles, Agricultural machines, implements and equipment, Plastics, Refractories, Rubber and plastics products.
National Metrological Technical Specifications of the People's Republic of China, Syringe pump sample
- JJF 1259-2018 Calibration Specification for Syringe Pumps and Infusion Pumps
- JJF 1259-2010 Calibration Specification
for Syringe Pumps and Infusion Pumps
Japanese Industrial Standards Committee (JISC), Syringe pump sample
- JIS T 3256:2007 Infusion set for insulin pump
- JIS T 3256:2013 Infusion set for insulin pump
- JIS T 3254:2007 Single-use syringes for blood gas specimen collection
- JIS T 3254:2013 Single-use syringes for blood gas specimen collection
- JIS D 3638:2005 Road vehicles -- Diesel engines -- Fuel injection pump testing -- Calibrating fuel injectors
- JIS K 7152-3:1999 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 3: Small plates
- JIS K 7152-2:1999 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 2: Small tensile bars
- JIS K 7152-5:2007 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 5: Preparation of standard specimens for investigating anisotropy
- JIS K 7152-1:1999 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 1: General principles, and moulding of multipurpose and bar test specimens
British Standards Institution (BSI), Syringe pump sample
- BS EN ISO 7886-2:1996 Sterile hypodermic syringes for single use. Syringes for use with power-driven syringe pumps
- BS EN ISO 7886-2:2020 Sterile hypodermic syringes for single use - Syringes for use with power-driven syringe pumps
- 19/30380622 DC BS EN ISO 7886-2. Sterile hypodermic syringes for single use. Part 2. Syringes for use with power-driven syringe pumps
- BS ISO 7299:1996 Diesel engines - End-mounting flanges for fuel injection pumps
- 21/30407259 DC BS ISO 13457. Agricultural irrigation equipment. Water-driven chemical injector pumps
- BS ISO 13457:2021 Tracked Changes. Agricultural irrigation equipment. Water-driven chemical injector pumps
- BS EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Small plates
- BS EN ISO 294-3:2020 Plastics. Injection moulding of test specimens of thermoplastic materials - Small plates
- BS ISO 10724-2:1999 Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs). Small plates
- BS EN ISO 10724-2:1999 Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs). Small plates
- BS EN ISO 10724-2:2001 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Small plates
- BS EN ISO 294-5:2017 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
- BS EN ISO 294-2:2018 Tracked Changes. Plastics. Injection moulding of test specimens of thermoplastic materials. Small tensile bars
- BS EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Determination of moulding shrinkage
- BS EN ISO 294-1:2017 Tracked Changes. Plastics. Injection moulding of test specimens of thermoplastic materials. General principles, and moulding of multipurpose and bar test specimens
- BS 2782-9 Method 940B:1989 Methods of testing plastics. Sampling and test specimen preparation. Preparation of test specimens of amorphous thermoplastics with a specified reversion by injection moulding rectangular plates
- 18/30382578 DC BS EN ISO 294-3. Plastics. Injection moulding of test specimens of thermoplastic materials. Part 3. Small plates
- BS EN ISO 294-4:2019 Tracked Changes. Plastics. Injection moulding of test specimens of thermoplastic materials. Determination of moulding shrinkage
- BS ISO 10724-1:1998 Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs). General principles and moulding of multipurpose test specimens
Association Francaise de Normalisation, Syringe pump sample
- NF S93-001-2:1997 Sterile hypodermic syringes for single use. Part 2 : syringes for use with power-driven syringe pumps.
- NF EN ISO 7886-2:2020 Seringues hypodermiques stériles, non réutilisables - Partie 2 : seringues pour pousse-seringues électriques
- NF S93-001-2*NF EN ISO 7886-2:2020 Sterile hypodermic syringes for single use - Part 2 : syringes for use with power-driven syringe pumps
- NF T51-294-3*NF EN ISO 294-3:2020 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3 : small plates
- NF T51-294-2*NF EN ISO 294-2:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars
- NF EN ISO 294-3:2020 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 3 : plaques de petites dimensions
- NF EN ISO 294-2:2018 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 2 : Barreaux de traction de petites dimensions
- NF EN ISO 294-5:2017 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 5 : préparation d'éprouvettes normalisées pour déterminer l'anisotropie
- NF T51-294-5*NF EN ISO 294-5:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5 : preparation of standard specimens for investigating anisotropy
- NF T51-294-1*NF EN ISO 294-1:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1 : general principles, and moulding of multipurpose and bar test specimens
- NF T51-294-4*NF EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4 : determination of moulding shrinkage
- NF EN ISO 294-4:2019 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 4 : détermination du retrait au moulage
German Institute for Standardization, Syringe pump sample
- DIN EN ISO 7886-2:1997 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:1997); German version EN ISO 7886-2:1997
- DIN EN ISO 7886-2:2020-10 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:2020); German version EN ISO 7886-2:2020
- DIN EN ISO 7886-2:2020 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:2020)
- DIN EN 60601-2-24:1999 Medical electrical equipment - Part 2-24: Particular requirements for the safety of infusion pumps and controllers (IEC 60601-2-24:1998); German version EN 60601-2-24:1998
- DIN EN ISO 294-3:2020-11 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020); German version EN ISO 294-3:2020
- DIN EN ISO 294-2:2019-03 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018); German version EN ISO 294-2:2018
- DIN EN ISO 294-5:2018-03 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017); German version EN ISO 294-5:2017
- DIN EN ISO 294-2:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018)
- DIN EN ISO 294-4:2019-04 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2018); German version EN ISO 294-4:2019
- DIN EN ISO 10724-2:2000 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2: Small plates (ISO 10724-2:1998); German version EN ISO 10724-2:2000
- DIN EN ISO 294-5:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2017)
- DIN EN ISO 10724-1:2002-04 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of multipurpose test specimens (ISO 10724-1:1998); German version EN ISO 10724-1:2001
- DIN EN ISO 294-1:2017-09 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:2017); German version EN ISO 294-1:2017
- DIN EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2018)
- DIN EN ISO 10724-2:2000-12 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2: Small plates (ISO 10724-2:1998); German version EN ISO 10724-2:2000
- DIN EN ISO 294-4:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO/FDIS 294-4:2018); German and English version prEN ISO 294-4:2018
Group Standards of the People's Republic of China, Syringe pump sample
国家食品药品监督管理局, Syringe pump sample
- YY/T 0573.2-2018 Single use sterile syringes Part 2: Syringes for power driven syringe pumps
卫生健康委员会, Syringe pump sample
- WS/T 657-2019 Safety management of medical infusion pumps and medical injection pumps
International Organization for Standardization (ISO), Syringe pump sample
- ISO 7886-2:2020 Sterile hypodermic syringes for single use — Part 2: Syringes for use with power-driven syringe pumps
- ISO 7886-2:1996 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps
- ISO 10724:1994 Plastics - Thermosetting moulding materials - Injection moulding of multipurpose test specimens
- ISO 294-3:2020 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 3: Small plates
- ISO 294-2:2018 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 2: Small tensile bars
- ISO 10724-2:1998 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2: Small plates
- ISO 10724-1:1998 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of multipurpose test specimens
- ISO 2557-2:1979 Plastics — Amorphous thermoplastic moulding materials — Preparation of test specimens with a defined level of shrinkage — Part 2: Test specimens in the form of rectangular plates (Injection moulding)
National Metrological Verification Regulations of the People's Republic of China, Syringe pump sample
European Committee for Standardization (CEN), Syringe pump sample
- EN ISO 7886-2:2020 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:2020)
- EN ISO 7886-2:1997 Sterile Hypodermic Syringes for Single Use - Part 2: Syringes for Use with Power-Driven Syringe Pumps
- prEN ISO 294-5 rev Plastics — Injection moulding of test specimens of thermoplastic materials — Part 5: Preparation of standard specimens for investigating anisotropy
- EN ISO 10724-2:2000 Plastics - Injection Moulding of Test Specimens of Thermosetting Powder Moulding Compounds (PMCs) - Part 2: Small Plates
- EN ISO 10724-1:2001 Plastics - Injection Moulding of Test Specimens of Thermosetting Powder Moulding Compounds (PMCs) - Part 1: General Principles and Moulding of Multipurpose Test Specimens ISO 10724-1:1998
CZ-CSN, Syringe pump sample
ES-UNE, Syringe pump sample
- UNE-EN ISO 7886-2:2020 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:2020)
- UNE-EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2018)
- UNE-EN ISO 294-2:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018)
Danish Standards Foundation, Syringe pump sample
- DS/EN ISO 7886-2:1998 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps
- DS/EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates
- DS/EN ISO 294-2/A1:2005 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars
- DS/EN ISO 294-2:1999 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars.
- DS/EN ISO 10724-2:2000 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2: Small plates
- DS/EN ISO 294-1/A1:2002 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens
- DS/EN ISO 294-1:1999 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens
- DS/EN ISO 294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
- DS/EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
- DS/EN ISO 10724-1:2001 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of multipurpose test specimens
IT-UNI, Syringe pump sample
- UNI EN ISO 7886-2:2021 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps
GOSTR, Syringe pump sample
- GOST R ISO 7886-2-2017 Sterile hypodermic syringes for single use. Part 2. Syringes for use with power-driven syringe pumps
KR-KS, Syringe pump sample
- KS P ISO 7886-2-2022 Sterile hypodermic syringes for single use — Part 2: Syringes for use with power-driven syringe pumps
Lithuanian Standards Office , Syringe pump sample
- LST EN ISO 7886-2:2001 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:1996)
- LST EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002)
- LST EN ISO 294-2:2000 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996)
- LST EN ISO 10724-2:2002 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2: Small plates (ISO 10724-2:1998)
- LST EN ISO 294-1:2000 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:1996)
- LST EN ISO 294-2:2000/A1:2005 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996/Amd 1:2004)
- LST EN ISO 10724-1:2002 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of multipurpose test specimens (ISO 10724-1:1998)
- LST EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2001)
- LST EN ISO 294-1:2000/A1:2002 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:1996/Amd. 1:2001)
CH-SNV, Syringe pump sample
- SN EN ISO 7886-2:2020 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:2020)
- SN EN ISO 294-3:2020 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
Indonesia Standards, Syringe pump sample
- SNI 16-7010.2-2004 Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps
- SNI 06-4595-1998 Plastics - Injections moulding test specimens of thermo plastic materials
PL-PKN, Syringe pump sample
- PN-EN ISO 7886-2-2020-11 E Sterile hypodermic syringes for single use -- Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:2020)
- PN-EN ISO 294-3-2021-01 E Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
AENOR, Syringe pump sample
- UNE-EN ISO 7886-2:1998 STERILE HYPODERMIC SYRINGES FOR SINGLE USE. PART 2: SYRINGES FOR USE WITH POWER-DRIVEN SYRINGE PUMPS. (ISO 7886-2:1996).
- UNE-EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002)
- UNE-EN ISO 10724-2:2001 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2: Small plates. (ISO 10724-2:1998)
- UNE-EN ISO 294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy (ISO 294-5:2011)
- UNE-EN ISO 294-1:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:2017)
- UNE-EN ISO 294-2:1999 PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - PART 2: SMALL TENSILE BARS (ISO 294-2:1996)
- UNE-EN ISO 294-2:1999/A1:2006 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996/Amd 1:2004)
- UNE-EN ISO 10724-1:2002 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of multipurpose test specimens. (ISO 10724-1:1998)
- UNE-EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2001)
AT-ON, Syringe pump sample
- ONORM M 5852-1995 Air analysis - Sampling for continuous immission monitoring
- OENORM EN ISO 294-3:2020 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
RU-GOST R, Syringe pump sample
- GOST R 57504-2017 Medical devices. Syringe pumps. Technical requirements for governmental purchases
SE-SIS, Syringe pump sample
未注明发布机构, Syringe pump sample
- DIN EN ISO 294-3:1998 Plastics Injection molding of thermoplastic test specimens Part 3: Small plates
- DIN EN ISO 294-2:1998 Plastics — Injection molding of test specimens of thermoplastic materials — Part 2: Small tensile bars
- BS EN ISO 294-5:2017(2018) Plastics - Injection moulding of test specimens of thermoplastic materials Part 5 : Preparation of standard specimens for investigating anisotropy
- BS EN ISO 10724-1:2001(2002) Plastics — Injection moulding oftest specimens of thermosetting powder moulding compounds (PMCs) — Part1 : Generalprinciples and moulding ofmultipurpose test specimens
American Society for Testing and Materials (ASTM), Syringe pump sample
- ASTM D3641-21 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
- ASTM C903-10 Standard Practice for Preparing Refractory Castable Specimens by Cold Gunning
- ASTM D3419-12(2019) Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds
- ASTM D3419-12 Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds
CL-INN, Syringe pump sample
Korean Agency for Technology and Standards (KATS), Syringe pump sample
- KS M ISO 10724-2-2010(2020) Plastics-Injection moulding of test specimens of thermosetting powder moulding compounds(PMCs)-Part 2:Small plates
- KS M ISO 10724-1-2010(2020) Plastics-Injection moulding of test specimens of thermosetting powder moulding compounds(PMCs)-Part 1:General principles and moulding of multipurpose test specimens
- KS M ISO 10724-2:2010 Plastics-Injection moulding of test specimens of thermosetting powder moulding compounds(PMCs)-Part 2:Small plates
- KS M ISO 10724-1:2010 Plastics-Injection moulding of test specimens of thermosetting powder moulding compounds(PMCs)-Part 1:General principles and moulding of multipurpose test specimens