ZH
RU
ES

Six-hole plate orifice plate

Six-hole plate orifice plate, Total:499 items.

In the international standard classification, Six-hole plate orifice plate involves: Equipment for processing of minerals, Fasteners for aerospace construction, Pipeline components and pipelines, Shipbuilding and marine structures in general, Printed circuits and boards, Ground service and maintenance equipment, Machine tool systems, Particle size analysis. Sieving, Components for aerospace construction, Construction materials, Coatings and related processes used in aerospace industry, Insulating fluids, Non-ferrous metals, Laboratory medicine, Protection of and in buildings, Analytical chemistry, Measurement of fluid flow, Fasteners, FLUID SYSTEMS AND COMPONENTS FOR GENERAL USE, Equipment for the chemical industry, Water quality, Valves, Rubber and plastics products, Textile machinery, Screw threads, Cases. Boxes. Crates, Seals, glands, Paper and board, Cutting tools, Electrical accessories, Measurement of force, weight and pressure, Ceramics, Cellular materials, Installations in buildings, Nuclear energy engineering, Galvanic cells and batteries, Wood-based panels, Footwear, Products of non-ferrous metals, Insulating materials, Burners. Boilers, Materials for aerospace construction, Ventilators. Fans. Air-conditioners, Testing of metals, Aerospace electric equipment and systems.

ESDU - Engineering Sciences Data Unit, Six-hole plate orifice plate

ESDU 81039 C-2007 Flow of liquids. Pressure losses across orifice plates@ perforated plates and thick orifice plates in ducts.
ESDU 81039 B-1985 FLOW OF LIQUIDS Pressure losses across orifice plates@ perforated plates and thick orifice plates in ducts
ESDU 82009 C-1993 COMPRESSIBLE FLOW OF GASES Pressure losses across orifice plates@ perforated plates and thick orifice plates in ducts
ESDU 82009 D-2007 Compressible flow of gases. Pressure losses and discharge coefficients of orifice plates@ perforated plates and thick orifice plates in ducts.
ESDU 15005-2015 Stress concentration factors for optimised holes in flat plate

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Six-hole plate orifice plate

GB/T 10612-2003 Industrial plate screens--Thickness below 3mm-Round and square holes
GB/T 12620-2008 Round and elongated apertures with round and square plate screens
GB/T 10613-2003 Industrial plate screens-Thickness of 3mm and above-Round and square holes
GB/T 12620-1990 Slots with round end and slots with square end plate screens
GB/T 6003.2-1997 Test sieves of perforated metal plate
GB/T 10061-1988 Screen plants--Codification for designating perforations
GB 12987-1997 Concrete hollow floor slab for rural houses
GB 12987-1991 Concrete hollow floor slab for rural houses
GB/T 10061-2008 Screen plants.Codification for designating perforations
GB/T 6005-2008 Test sieves.Metal wire cloth,perforated metal plate and electroformed sheet.Nominal sizes of openings
GB/T 6005-1997 Test sieves--Metal wire cloth, perforated metal plate and electroformed sheet--Nominal sizes of opening
GB/T 19360-2004 Industrial plate screens—Specifications and test methods
GB/T 31976-2015 Aluminium alloy sheets used for sound-absorbing composite panel with through-hole
GB/T 2679.14-1996 Filter paper and filterboard--Determination of maximum pore diameter

Society of Automotive Engineers (SAE), Six-hole plate orifice plate

SAE AS9528-2000 Screw, Machine Steel AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .164-36 UNJF-3A
SAE AS9530-1998 Bolt, Machine - Steel AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .250-28 UNFJ-3A
SAE AS9528C-2022 SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE HEXAGON HEAD, .1640-36 UNJF-3A
SAE AS9531-2006 BOLT, MACHINE - STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .3125-24 UNJF-3A
SAE AS9529-2004 BOLT, MACHINE - STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .190-32 UNJF-3A
SAE AS9530-2006 BOLT, MACHINE - STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .250-28 UNJF-3A
SAE AS9533-2006 BOLT, MACHINE - STEEL, AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .4375-20 UNJF-3A
SAE AS9534-2006 BOLT, MACHINE - STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .500-20 UNJF-3A
SAE AS9532-2006 BOLT, MACHINE - STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .375-24 UNJF-3A
SAE AS9527-2004 SCREW, MACHINE STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .138-40 UNJF-3A
SAE AS9528-2004 SCREW, MACHINE STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .164-36 UNJF-3A
SAE AS9527C-2022 SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .1380-40 UNJF-3A
SAE AS9529C-2022 BOLT, MACHINE - STEEL UNS G87400 CADMIUM PLATE, DRILLED, 1 HOLE HEXAGON HEAD, 1900-32 UNJF-3A
SAE AS9529A-2007 BOLT, MACHINE - STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .1900-32 UNJF-3A
SAE AMS2407E-1985 Plating, Chromium, Porous
SAE AS9686C-2022 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .2500-28 UNJF-3A
SAE AS9687A-2007 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .3125-24 UNJF-3A
SAE AS9685A-2007 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .1900-32 UNJF-3A
SAE AS9685D-2023 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .1900-32 UNJF-3A
SAE AS9686A-2007 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .2500-28 UNJF-3A
SAE AS9685C-2022 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .1900-32 UNJF-3A
SAE AS9687C-2022 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .3125-24 UNJF-3A
SAE MA3304A-2006 BOLT-MACHINE, HEX HEAD, DRILLED, PD SHANK, MJ THREAD, AMS 6322, CADMIUM PLATE, METRIC
SAE AMS3635A-1960 PLASTIC SHEET Cellular, Shock Absorbing (Closed Cell, Foamed, Modified Vinyl Sheet)
SAE AS9589-2006 BOLT, MACHINE-HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, .5625-18 UNJF-3A

SAE - SAE International, Six-hole plate orifice plate

SAE AS9527B-2016 SCREW@ MACHINE STEEL UNS G87400@ CADMIUM PLATE@ DRILLED@ 1 HOLE@ HEXAGON HEAD@ .1380-40 UNJF-3A
SAE AS9527-2000 Screw@ Machine Steel AMS 6322@ Cadmium Plate@ Drilled@ 1 Hole@ Hexagon Head@ .138-40 UNJF-3A
SAE AS9528B-2016 SCREW@ MACHINE STEEL UNS G87400@ CADMIUM PLATE@ DRILLED@ 1 HOLE@ HEXAGON HEAD@ .164-36 UNJF-3A
SAE AS9527A-2007 SCREW@ MACHINE STEEL UNS G87400@ CADMIUM PLATE@ DRILLED@ 1 HOLE@ HEXAGON HEAD@ .1380-40 UNJF-3A
SAE AS9532-1998 Bolt@ Machine - Steel AMS 6322@ Cadmium Plate@ Drilled@ 1 Hole@ Hexagon Head@ .375-24 UNJF-3A
SAE AS9534-1998 Bolt@ Machine - Steel AMS 6322@ Cadmium Plate@ Drilled@ 1 Hole@ Hexagon Head@ .500-20 UNJF-3A
SAE AS9533-1998 Bolt@ Machine - Steel AMS 6322@ Cadmium Plate@ Drilled@ 1 Hole@ Hexagon Head@ .4375-20 UNJF-3A
SAE AS9531-1998 Bolt@ Machine - Steel AMS 6322@ Cadmium Plate@ Drilled@ 1 Hole@ Hexagon Head@ .3125-24 UNJF-3A
SAE AS9529B-2016 BOLT@ MACHINE - STEEL UNS G87400@ CADMIUM PLATE@ DRILLED@ 1 HOLE@ HEXAGON HEAD@ .1900-32 UNJF-3A
SAE AS9686-1998 Bolt@ Machine - Hexagon Head@ Drilled@ 1 Hole@ PD Shank@ Steel AMS 6304@ Diffused Nickel Cadmium Plate@ .250-28 UNJF-3A
SAE AS9685-2000 Bolt@ Machine - Hexagon Head@ Drilled@ 1 Hole@ PD Shank@ Steel AMS 6304@ Diffused Nickel Cadmium Plate@ .190-32 UNJF-3A
SAE AS9687-1998 Bolt@ Machine - Hexagon Head@ Drilled@ 1 Hole@ PD Shank@ Steel AMS 6304@ Diffused Nickel Cadmium Plate@ .3125-24 UNJF-3A
SAE AS9685A-2003 BOLT@ MACHINE - HEXAGON HEAD@ DRILLED@ 1 HOLE@ PD SHANK@ STEEL@ UNS K14675@ DIFFUSED NICKELCADMIUM PLATE@ 195 KSI MIN@ .1900-32 UNJF-3A
SAE AS9685B-2016 BOLT@ MACHINE - HEXAGON HEAD@ DRILLED@ 1 HOLE@ PD SHANK@ STEEL@ UNS K14675@ DIFFUSED NICKELCADMIUM PLATE@ 195 KSI MIN@ .1900-32 UNJF-3A
SAE MA3304-1987 Bolt-Machine@ Hex Head@ Drilled@ PD Shank@ MJ Thread@ AMS 6322@ Cadmium Plate@ Metric
SAE MA3304A-1996 Bolt-Machine@ Hex Head@ Drilled@ PD Shank@ MJ Thread@ AMS 6322@ Cadmium Plate@ Metric

Korean Agency for Technology and Standards (KATS), Six-hole plate orifice plate

KS G 2626-2019 Steel sheet palettes for pupil
KS C 2367-1993 Rigid mica materials for punching
KS D 7082-1991 Perforated Aluminium Panel for Acoustic Use
KS D 7082-2016 Perforated Aluminium Panel for Acoustic Use
KS D 7082-2016(2021) Perforated Aluminium Panel for Acoustic Use
KS M 7056-1982(2002) TESTING METHOD FOR PUNCTURE OF PAPERBOARD
KS M 7056-1982 TESTING METHOD FOR PUNCTURE OF PAPERBOARD
KS B ISO 10642:2007 Hexagon socket countersunk head screws
KS B ISO 10642-2007(2022) Hexagon socket countersunk head screws

American Society of Mechanical Engineers (ASME), Six-hole plate orifice plate

ASME B16.36-2015 Orifice flanges
ASME B16.36-1996 Orifice flanges
ASME B16.36-1988 Orifice flanges
ASME B16.36-2020 Orifice Flanges
ASME B16.36-2007 Orifice Flanges
ASME B16.36-2006 Orifice Flanges
ASME B16.36-2009 Orifice Flanges
ASME B16.36-1979 Orifice Flanges
ASME B16.36-1975 Orifice Flanges
ASME MFC-14M-1995 Measurement of fluid flow using small bore precision orifice meters
ASME STP-TS-084-2018 Orifice Flow Coefficient Equation Comparison
ASME MFC-14M-2003 Measurement of Fluid Flow Using Small Bore Precision Orifice Meters
ASME B94.35-1972 Drill drivers - Split-sleeve, collet type

American National Standards Institute （ANSI), Six-hole plate orifice plate

ANSI/ASME B16.36-2020 Orifice Flanges
ANSI/ASME B16.36-2009 Orifice Flanges
ANSI/ASME MFC-14M-2003 Measurement of Fluid Flow Using Small Bore Precision Orifice Meters

German Institute for Standardization, Six-hole plate orifice plate

DIN 82024:1990 Round eye plates
DIN 82024:2018 Round eye plates
DIN 24041:2021 Perforated plates - Dimensions
DIN 7333:1962 Eyeletts for cardboard labels
DIN 24041:2022-06 Perforated plates - Dimensions
DIN 24041:2022 Perforated plates - Dimensions
DIN 24041:2002 Perforated plates - Dimensions
DIN 7333:1962-01 Eyeletts for cardboard labels
DIN 87225:2018-12 Scuppers for free decks
DIN 791:1967 Expanded metal
DIN 7952-2:1971-10 Sheet Metal Rim Holes with Screw Thread; Prepunch Hole Diameters
DIN 64805:1984 Double lift dobbies; cards, matrices
DIN 7952-2:1971 Sheet Metal Rim Holes with Screw Thread; Prepunch Hole Diameters
DIN ISO 21949:2001 Coated abrasives - Plain sheets with holes for dust extraction (ISO 21949:2001)
DIN 28182:2007-09 Tubular heat exchangers - Tube pitches, diameter of bores in tube sheets, baffles and support plates
DIN 53142-1:2014 Testing of board - Puncture test - Part 1: Puncture test with a pendulum punching device
DIN 53142-1:2004 Testing of board - Puncture test - Part 1: Puncture test with a pendulum punching device
DIN 83223:2006-07 Bulb plates, perforated gratings or flooring grids for working floors and walkways
DIN 28182:2007 Tubular heat exchangers - Tube pitches, diameter of bores in tube sheets, baffles and support plates
DIN 28182:1987 Tubular heat exchangers; tube pitches, diameter of bores in tube sheets, baffles and support plates
DIN 86042:1978 Dummy Hole Plates (Spectacle Flanges); Mating Dimensions according to Nominal Pressure 10 and 16
DIN 105-5:1984 Clay bricks; lightweight horizontally perforated bricks and lightweight horizontally perforated brick panels
DIN 53142-2:2004 Testing of board - Puncture test - Part 2: Puncture test with linear move
DIN 53142-2:2014 Testing of board - Puncture test - Part 2: Puncture test with linear move

Group Standards of the People's Republic of China, Six-hole plate orifice plate

T/CPCA 4403-2010 Backup board for printed circuit board drilling
T/CPCA 4402-2010 Entry board for printed circuit board drilling
T/SZAS 41-2021 Performance verification of deep well plate
T/CASME 535-2023 Cell culture microtiter plate
T/KSMA 001-2019 Piercing Punches of Stamping Dies for Thick Plate
T/CPCA 6042-2016 Silver through-hole printed circuit board
T/CPCA 6042A-2023 Silver pasted through-hole printed circuit board
T/ZZB 1651-2020 Single and double sided printed boards with plated-through holes
T/SZBX 147-2023 High-precision irregular shaped hole spinneret for melt spinning

工业和信息化部, Six-hole plate orifice plate

SJ/T 11641-2016 Cover plate for printed board drilling
SJ/T 11660-2016 Backing plate for drilling holes in printed boards
JBT13741-2019 Orifice grille decontamination machine
JB/T 13741-2019 Orifice grille decontamination machine
JB/T 7252-2018 Valve type orifice throttling device
QB/T 5490-2020 Polypropylene microporous foam sheet
JB/T 14241-2022 Integrated valve orifice flow meter

RO-ASRO, Six-hole plate orifice plate

STAS 10948-1988 PERFORATED PLATES FOR GENERAL PURPOSE
STAS 1624-1992 Cellular wooden plates for inner doors
STAS 1078-1973 Sives and screens for material testing and selecting PERFORATED PLATES

Professional Standard - Forestry, Six-hole plate orifice plate

LY/T 1361-1999 Veneer patcher
LY/T 1579-2000 Gummed tape with holes used for jointing edges of inner veneers

Professional Standard - Aviation, Six-hole plate orifice plate

HB 1477-1987 Countersunk drill template
HB 3955-1987 Side-hole position plate
HB 3961-1987 Countersunk drill template
HB 1291-1987 Countersunk drill template
HB 1410-1987 Side-hole position plate
HB 1555-1987 Back plate with middle hole
HB 1471-1987 Middle hole position plate
HB 4309-1989 Square hole back-up board
HB 4310-1989 Rectangular hole back-up board
HB 1268-1987 Back plate with middle hole
HB 4023-1988 Eccentric hole lower baseplate
HB 1411-1987 Large middle hole back plate
HB 1564-1987 Large middle hole back plate
HB 1563-1987 Large middle hole position plate
HB 4022-1988 Round hole lower baseplate
HB 409-1971 Rotating platen with screw holes
HB 407-1971 Mobile platen with screw holes
HB 1872-1971 Mobile platen with screw holes
HB 1873-1971 Rotating platen with screw holes
HB 4307-1989 Round hole supporting guide plate
HB 4304-1989 Round hole male and female die back plates
HB 4528.10-1991 H-type hole combination fixture basic part single hole conversion plate
HB 4528.11-1991 Three-hole conversion plate for base part of H-type hole combination fixture
HB 4513-1991 Rectangular plate (for scribing and drilling table )
HB 4528.9-1991 H-type hole combination fixture base part single screw hole conversion plate
HB 4528.14-1991 The whole set of hole conversion plate for the base part of the H-type hole combination fixture
HB 4530.5-1991 H-type hole combination fixture pressing plate flat pressing plate
HB 4530.4-1991 H-type hole combination fixture pressing plate flat pressing plate
HB 4528.12-1991 H-type hole combination fixture basic part single and half group hole conversion plate
HB 4528.13-1991 H-type hole combination fixture base part double half group hole conversion plate
HB 4535.21-1991 K type hole series combined clamp elements Square back-up board for transition of holes and grooves
HB 4530.17-1991 H-type hole combination fixture press plate type hinge press plate
HB 4530.18-1991 H-type hole combination clamp platen swing platen
HB 4530.20-1991 H-type hole combination clamp platen fork platen
HB 4530.7-1991 H-type hole combination fixture press plate elbow press plate
HB 4530.8-1991 H-type hole combination clamp platen U-shaped platen
HB 4530.9-1991 H-type hole combination clamp platen U-shaped platen
HB 4530.10-1991 H-type hole combination clamp platen U-shaped platen
HB 4530.15-1991 H-type hole combination fixture pressure plate type piece pressure plate support
HB 4530.6-1991 H-type hole combination fixture press plate elbow press plate
HB 4530.16-1991 H-type hole combination fixture pressure plate type piece pressure plate support
HB 4530.19-1991 H-type hole combination clamp platen fork platen
HB 4529.3-1991 H-type hole system combination fixture positioning part single group hole coordinate adjustment plate
HB 3829-1986 Anchor locknut rivet hole drilling jig
HB 4531.9-1991 H-type hole combination fixture system accessories base plate connecting plate
HB 7146.2-1995 Large-scale series combination fixture guide part double-sided groove counterbore middle hole drilling template
HB 8056-2002 Self-locking,single-lug double holes anchor nuts, with MJ thread
HB 8057-2002 Self-locking,single-lug single holes anchor nuts, with MJ thread
HB 4535.15-1991 K type hole series combined clamp elements V shaped plate
HB 6382-1989 Wire Spring Hole Electrical Connectors for Printed Circuit Boards
HB 8056-2013 16CrSiNiMJ thread single ear double hole pallet self-locking nut
HB 3830-1986 Free anchor locknut rivet hole drilling jig
HB 4535.40-1991 K type hole series combined clamp elements Interposer
HB 0-9-1983 Insurance hole for hexagonal parts
HB 0-9-1974 Insurance hole for hexagonal parts

Professional Standard-Ships, Six-hole plate orifice plate

CB/T 4366-2014 A type orifice flanges

Defense Logistics Agency, Six-hole plate orifice plate

DLA MIL-S-12875 B NOTICE 1-1997 SHEET, PERFORATED, METAL
DLA MIL-S-12875 B-1969 SHEET, PERFORATED, METAL
DLA MIL-DTL-5423/7 G-2009 BOOT, DUST AND WATER SEAL, TYPE B (FOR PUSHBUTTON SWITCHES), STYLE 2 (ONE ?HOLE MOUNTING, DRILLED PANEL), STYLE 2S (RFI-SHIELDED, ONE ?HOLE MOUNTING, DRILLED PANEL)
DLA AN104201 THRU AN104300 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .500-20
DLA AN104401 THRU AN104500 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .625-18
DLA AN102801 THRU AN102900 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .190-32
DLA AN102801 THRU AN102900 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 1 HOLE, .190-32
DLA AN102801 THRU AN102900 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .190-32
DLA AN102901 THRU AN103000 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .250-28
DLA AN102901 THRU AN103000 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 1 HOLE, .250-28
DLA AN102901 THRU AN103000 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .250-28
DLA AN103001 THRU AN103100 REV 5 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .3125-24
DLA AN103001 THRU AN103100 REV 5-1987 BOLT - DRILLED HEX HEAD, 1 HOLE, .3125-24
DLA AN103101 THRU AN103200 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .375-24
DLA AN103101 THRU AN103200 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 1 HOLE, .375-24
DLA AN103101 THRU AN103200 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .375-24
DLA AN103201 THRU AN103300 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .4375-20
DLA AN103201 THRU AN103300 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 1 HOLE, .4375-20
DLA AN103201 THRU AN103300 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .4375-20
DLA AN103301 THRU AN103400 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .500-20
DLA AN103301 THRU AN103400 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 1 HOLE, .500-20
DLA AN103301 THRU AN103400 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .500-20
DLA AN103401 THRU AN103500 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .5625-18
DLA AN103401 THRU AN103500 REV 3 VALID NOTICE 1-19 BOLT - DRILLED HEX HEAD, 1 HOLE, .5625-18
DLA AN103401 THRU AN103500 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .5625-18
DLA AN103501 THRU AN103600 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .625-18
DLA AN103501 THRU AN103600 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 1 HOLE, .625-18
DLA AN103501 THRU AN103600 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .625-18
DLA AN103601 THRU AN103700 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .750-16
DLA AN103601 THRU AN103700 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 1 HOLE, .750-16
DLA AN103601 THRU AN103700 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .750-16
DLA AN103701 THRU AN103800 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .190-32
DLA AN103701 THRU AN103800 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .190-32
DLA AN103701 THRU AN103800 REV 3-1986 BOLT - DRILLED HEX HEAD, 6 HOLES, .190-32
DLA AN103801 THRU AN103900 REV 2 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .250-28
DLA AN103801 THRU AN103900 REV 2 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .250-28
DLA AN103801 THRU AN103900 REV 2-1969 BOLT - DRILLED HEX HEAD, 6 HOLES, .250-28
DLA AN103901 THRU AN104000 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .3125-24
DLA AN103901 THRU AN104000 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .3125-24
DLA AN103901 THRU AN104000 REV 3-1986 BOLT - DRILLED HEX HEAD, 6 HOLES, .3125-24
DLA AN104001 THRU AN104100 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .375-24
DLA AN104001 THRU AN104100 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .375-24
DLA AN104001 THRU AN104100 REV 3-1986 BOLT - DRILLED HEX HEAD, 6 HOLES, .375-24
DLA AN104101 THRU AN104200 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .4375-20
DLA AN104101 THRU AN104200 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .4375-20
DLA AN104101 THRU AN104200 REV 3-1986 BOLT - DRILLED HEX HEAD, 6 HOLES, .4375-20
DLA AN104201 THRU AN104300 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .500-20
DLA AN104201 THRU AN104300 REV 3-1986 BOLT - DRILLED HEX HEAD, 6 HOLES, .500-20
DLA AN104301 THRU AN104400 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .5625-18
DLA AN104301 THRU AN104400 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .5625-18
DLA AN104301 THRU AN104400 REV 3-1986 BOLT - DRILLED HEX HEAD, 6 HOLES, .5625-18
DLA AN104401 THRU AN104500 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .625-18
DLA AN104401 THRU AN104500 REV 3-1986 BOLT - DRILLED HEX HEAD, 6 HOLES, .625-18
DLA AN106601 THRU AN106700 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .3125-24
DLA AN107701 THRU AN107800 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .4375-20
DLA AN107901 THRU AN108000 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .5625-18
DLA AN107901 THRU AN108000 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .5625-18
DLA AN108101 THRU AN108200 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .750-16
DLA MIL-STD-1672 VALID NOTICE 3-2006 CONNECTOR, UMBILICAL, INSERT ARRANGEMENTS
DLA MIL-STD-1672 VALID NOTICE 2-2001 CONNECTOR, UMBILICAL, INSERT ARRANGEMENTS
DLA MIL-STD-1672 VALID NOTICE 1-1991 CONNECTOR, UMBILICAL, INSERT ARRANGEMENTS
DLA MIL-STD-1672-1975 CONNECTOR, UMBILICAL, INSERT ARRANGEMENTS
DLA AN107301 THRU AN107400 REV 3 (1)-2003 BOLT - CRES DRILLED HEX HEAD, 6 HOLES, .190-32
DLA AN107301 THRU AN107400 REV 3-1986 BOLT - CRES DRILLED HEX HEAD, 6 HOLES, .190-32
DLA A-A-59385 VALID NOTICE 1-2005 GRINDING MACHINE, CENTER HOLE, VERTICAL, FLOOR-MOUNTED
DLA A-A-59385-1999 GRINDING MACHINE, CENTER HOLE, VERTICAL, FLOOR-MOUNTED
DLA AN106401 THRU AN106500 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .190-32
DLA AN106401 THRU AN106500 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .190-32
DLA AN106501 THRU AN106600 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .250-28
DLA AN106501 THRU AN106600 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .250-28
DLA AN106601 THRU AN106700 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .3125-24
DLA AN106701 THRU AN106800 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .375-24
DLA AN106701 THRU AN106800 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .375-24
DLA AN107101 THRU AN107200 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .625-18
DLA AN107101 THRU AN107200 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .625-18
DLA AN107201 THRU AN107300 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .750-16
DLA AN107201 THRU AN107300 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .750-16
DLA AN107401 THRU AN107500 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .250-28
DLA AN107401 THRU AN107500 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .250-28
DLA AN107501 THRU AN107600 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .3125-24
DLA AN107501 THRU AN107600 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .3125-24
DLA AN107601 THRU AN107700 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .375-24
DLA AN107601 THRU AN107700 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .375-24
DLA AN107701 THRU AN107800 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .4375-20
DLA AN108001 THRU AN108100 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .625-18
DLA AN108001 THRU AN108100 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .625-18
DLA AN108101 THRU AN108200 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .750-16
DLA AN108001 THRU AN108100 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .625-18
DLA AN106401 THRU AN106500 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 1 Hole, .190-32
DLA AN106401 THRU AN106500 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .190-32
DLA AN106501 THRU AN106600 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 1 Hole, .250-28
DLA AN106501 THRU AN106600 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .250-28
DLA AN106601 THRU AN106700 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 1 Hole, .3125-24
DLA AN106601 THRU AN106700 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .3125-24
DLA AN106701 THRU AN106800 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 1 Hole, .375-24
DLA AN106701 THRU AN106800 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .375-24
DLA AN106801 THRU AN106900 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 1 Hole, .4375-20
DLA AN106901 THRU AN107000 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 1 Hole, .500-20
DLA AN107001 THRU AN107100 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 1 Hole, .5625-18
DLA AN107101 THRU AN107200 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 1 Hole, .625-18
DLA AN107101 THRU AN107200 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .625-18
DLA AN107201 THRU AN107300 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 1 Hole, .750-16
DLA AN107201 THRU AN107300 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .750-16
DLA AN107401 THRU AN107500 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 6 Holes, .250-28
DLA AN107401 THRU AN107500 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .250-28
DLA AN107501 THRU AN107600 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 6 Holes, .3125-24
DLA AN107501 THRU AN107600 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .3125-24
DLA AN107601 THRU AN107700 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 6 Holes, .375-24
DLA AN107601 THRU AN107700 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .375-24

HU-MSZT, Six-hole plate orifice plate

CU-NC, Six-hole plate orifice plate

NC 42-10-1968 Porosity in paper and board

FI-SFS, Six-hole plate orifice plate

SFS 8387-1986 In case of interpretation disputes the Finnish text applies
SFS C.5.28-1953 Uppoasennusrasian 5-aukkoinen peitelevy
SFS C.5.26-1953 Uppoasennusrasian 3-aukkoinen peitelevy
SFS C.5.25-1953 Uppoasennusrasian 2-aukkoinen peitelevy
SFS C.5.27-1953 Uppoasennusrasian 4-aukkoinen peitelevy
SFS 8388-1986 In case of interpretation disputes the Finnish text applies
SFS C.5.23-1953
SFS C.5.24-1953
SFS 9016-1988
SFS 4184-1978
SFS 4183-1978

American Society for Testing and Materials (ASTM), Six-hole plate orifice plate

ASTM E323-80(2004) Standard Specification for Perforated-Plate Sieves for Testing Purposes
ASTM E454-11 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM E454-12 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM E454-09 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM E454-80(2004) Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM E674-80(2004) Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
ASTM E674-80(2001) Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
ASTM E454-12(2021) Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM E674-12(2021) Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
ASTM E454-12(2016) Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM E674-12(2016) Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
ASTM E674-09 Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
ASTM E454-80(2001) Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM E323-09 Standard Specification for Perforated-Plate Sieves for Testing Purposes
ASTM E323-11 Standard Specification for Perforated-Plate Sieves for Testing Purposes
ASTM E323-11(2021) Standard Specification for Perforated-Plate Sieves for Testing Purposes

Professional Standard - Machinery, Six-hole plate orifice plate

JB/T 9031-1999 Perforated screen plate for ore
JB/T 7252-1994 Valve type orifice plate throttling devices
JB/T 6634-1993 Orifice plates intended to be used in mechanical sealing systems
JB/T 7630.2-1998 Microporous rubber separator for lead acid storage batteries
JB/T 7630.2-2008 Microporous rubber separators for lead-acid batteries
JB/T 7630.5-1998 Microporous polyethylene separator for lead acid storage batteries
JB/T 7630.5-2008 Microporous polyethylene separators for lead-acid batteries
JB/ZQ 4172-2006 Single hole anchor plate for T-head anchor bolt

IT-UNI, Six-hole plate orifice plate

Professional Standard - Electron, Six-hole plate orifice plate

SJ/Z 21087-2016 Guide for drilling processing of printed circuit boards
SJ 3020.15-1988 Combined dies--Press stripper plate(square)
SJ 3020.16-1988 Combined dies--Press stripper plate (square)

CZ-CSN, Six-hole plate orifice plate

CSN 24 3231-1973 Smooth angle plates with holes in one arm
CSN 15 3330-1966 Perforated plates in test sieves
CSN 22 1300-1955
CSN 24 3236-1973 Ribbed angle plates with holes in both arms
CSN 24 3235-1973 Ribbed angle plates with holes in one arm
CSN ON 72 2766-1966
CSN 66 8211-1969 Perforation test of detonators at a teíting plate
CSN 22 1340-1955

Taiwan Provincial Standard of the People's Republic of China, Six-hole plate orifice plate

CNS 9957-1983 Perforated Aluminium Panel for Acoustic Use
CNS 4965-1998 Perforated Gypsum Boards for Acoustic Use
CNS 11484-1986 Method of Test for Puncture of Paperboard and Corrugated Fiberboard
CNS 10211-1983 Perforated Asbestos Cement Flat Sheets for Acoustic Use
CNS 310-1953 Tap for Whitworth Pipe Threading Dies
CNS 1409-1982 Micro Porous Rubber Separator for Lead Storage Batteries

US-ACEI, Six-hole plate orifice plate

IPC DR-572-1988 Drilling Guidelines for Printed Boards

IPC - Association Connecting Electronics Industries, Six-hole plate orifice plate

IPC DR-572A CD-2007 Drilling Guidelines for Printed Boards
IPC 4761 CD-2006 Design Guide for Protection of Printed Board Via Structures

Japanese Industrial Standards Committee (JISC), Six-hole plate orifice plate

JIS A 6305:1978 Perforated aluminium panel for acoustic use
JIS A 6302:1975 Perforated asbestos cement flat sheets for acoustic use
JIS B 1016:2006 Gauging of hexagon sockets

International Organization for Standardization (ISO), Six-hole plate orifice plate

ISO 565:1990 Test sieves; metal wire cloth, perforated metal plate and electroformed sheet; nominal sizes of openings
ISO 7806:1983 Industrial plate screens; Codification for designating perforations
ISO 7805-2:1987 Industrial plate screens; Part 2 : Thickness below 3 mm
ISO 7805-1:1984 Industrial plate screens; Part 1 : Thickness of 3 mm and above
ISO 2194:1991 Industrial screens; woven wire cloth, perforated plate and electroformed sheet; designation and nominal sizes of openings
ISO 13319-1:2021 Determination of particle size distribution - Electrical sensing zone method - Part 1: Aperture/orifice tube method
ISO 23429:2004 Gauging of hexagon sockets
ISO 16630:2009 Metallic materials - Sheet and strip - Hole expanding test
ISO 16630:2017 Metallic materials - Sheet and strip - Hole expanding test
ISO 10642:2004 Hexagon socket countersunk head screws

WRC - Welding Research Council, Six-hole plate orifice plate

BULLETIN 80-1962 ANALYSIS OF A PERFORATED CIRCULAR PLATE CONTAINING A RECTANGULAR ARRAY OF HOLES STRESSES AND DEFLECTIONS IN LATERALLY LOADED PERFORATED PLATES
BULLETIN 52-1959 A REVIEW@ COMPARISON AND MODIFICATION OF PRESENT DEFLECTION THEORY FOR FLAT PERFORATED PLATES CORRELATION OF EXPERIMENTAL DATA WITH THEORY FOR PERFORATED PLATES WITH A TRIANGULAR HOLE ARRAY
BULLETIN 124-1967 A STUDY OF PERFORATED PLATES WITH SQUARE PENETRATION PATTERNS

YU-JUS, Six-hole plate orifice plate

JUS G.S2.638-1985 Plastics. Hole test on sheets.

SE-SIS, Six-hole plate orifice plate

SIS SS 78 06 81-1990 Shipbuilding — Manhole cover with coaming, oval
SIS SS 78 06 82-1985 Shipbuilding - Manhole cover, recessed coaming - Oval
SIS SMS 714-1963

United States Navy, Six-hole plate orifice plate

NAVY AN367 REV 2 VALID NOTICE 1-1989 NUT, PLATE, COUNTERSUNK 82 DEG.
NAVY AN367 REV 2-1949 NUT, PLATE, COUNTERSUNK 82 DEG.
NAVY MIL-A-23054 A VALID NOTICE 1-1990 ACOUSTIC ABSORPTIVE BOARD, FIBROUS GLASS PERFORATED FIBROUS GLASS CLOTH FACED
NAVY MIL-A-23054 A (1)-1984 ACOUSTIC ABSORPTIVE BOARD, FIBROUS GLASS PERFORATED FIBROUS GLASS CLOTH FACED
NAVY MIL-A-23054 A-1982 ACOUSTIC ABSORPTIVE BOARD, FIBROUS GLASS PERFORATED FIBROUS GLASS CLOTH FACED
NAVY GGG-H-575 NOTICE 1-2001 HOLDER, SHEET METAL, HOLE AND EDGE GRIP
NAVY GGG-H-575 (1)-1999 HOLDER, SHEET METAL, HOLE AND EDGE GRIP
NAVY GGG-H-575-1966 HOLDER, SHEET METAL, HOLE AND EDGE GRIP
NAVY MIL-P-29609 (1)-2000 POLYIMIDE RETAINER MATERIAL, POROUS NON-METALLIC
NAVY MIL-P-29609-1995 POLYIMIDE RETAINER MATERIAL, POROUS NON-METALLIC
NAVY MS18301 REV B-1992 HIGH PRESSURE DRAIN ORIFICE PLATES AND STRAINERS

Professional Standard - Building Materials, Six-hole plate orifice plate

JC/T 803-1989 Perforated gypsum boards for acoustic use
JC/T 803-2007 Perforated gypsum board for acoustic use
JC/T 566-2008 Perforated fiber-cement sheet for absorbing sound
JC/T 566-2022 Perforated fiber cement board for sound absorption
JC/T 2685-2022 Porous Ceramic Plates for Air Conveying

Professional Standard - Chemical Industry, Six-hole plate orifice plate

HG/T 21529-2014 Plate flange handholes
HG/T 21529-2005 Plate type flat welding flange hand hole
HG 21529-1995 Plate type flat welding flange hand hole
HG/T 21529-2005（编制说明） Plate type flat welding flange hand hole
HG/T 21559.2-2005 Stainless steel perforated plate corrugated packing standard
HG/T 21559.1-1995 Stainless steel mesh plate corrugated packing
HG/T 21516-2014 Plate flange manholes with hinged cover
HG 21516-1995 Rotary cover plate flat welding flange manhole
HG/T 21516-2005 Rotary cover plate flat welding flange manhole
HG/T 21516-2005（编制说明） Rotary cover plate flat welding flange manhole
HG/T 21519-2014 Plate flange manholes with davit to vertical cover
HG/T 21522-2014 Plate flange manholes with davit to horizontal cover
HG/T 21522-2005 Horizontal hanging cover plate type flat welding flange manhole
HG 21519-1995 Vertical hanging cover plate flat welding flange manhole
HG 21522-1995 Horizontal hanging cover plate type flat welding flange manhole
HG/T 21519-2005 Vertical hanging cover plate flat welding flange manhole
HG/T 21519-2005（编制说明） Vertical hanging cover plate flat welding flange manhole
HG/T 21522-2005（编制说明） Horizontal hanging cover plate type flat welding flange manhole

IN-BIS, Six-hole plate orifice plate

Association Francaise de Normalisation, Six-hole plate orifice plate

NF T54-116:1973 Plastic. Sheets. Determination of resistance to perforation. Perforametre method.
NF B51-327:1977 Plywood. Dynamic punching test.
NF E25-170*NF EN ISO 23429:2004 Gauging of hexagon sockets
NF Q09-001:1975 Paper and board. Ordinary filling systems. Dimensional specifications for file fasteners and holes in sheets.
NF ISO 9269:1989 Implants chirurgicaux - Plaques métalliques pour os - Chambrages et alésages pour vis à embase conique.
NF A30-110:1983 Iron and steel - Marking of steel plates with piercer or paint
NF E29-210:2007 Industrial pipework - Orifice flanges for differential pressure devices.
NF E25-146:2004 Hexagon socket countersunk head screws.

RU-GOST R, Six-hole plate orifice plate

GOST 25056-1981 Cast deck and ship hawses. Specifications
GOST 26969-1986 Standard orifice plates for flowmeters. Specifications
GOST 12632-1979 Porous rubber sheets and details for shoes bottom. Specifications
GOST 27678-1988 Wood particle boads. Perforatory method for determining formaldehyde content

Indonesia Standards, Six-hole plate orifice plate

SNI 05-6395-2000 Specification of orifice discharge measuring instrument

TR-TSE, Six-hole plate orifice plate

TS 1226-1977 Metal Perforated Plates For Test Sieves

Professional Standard - Aerospace, Six-hole plate orifice plate

QJ 1962.7-1990 Simple universal punching molded plate
QJ 776.11-1983 Small combination die small hole hard stripper
QJ 981.1-1986 Die line template type marks and process holes
QJ 772.13-1983 Small combination die width 150 punching base plate
QJ 1210-1987 Method of Analysis for Printed Board Hole Metallization Solution

机械工业部, Six-hole plate orifice plate

JB/T 6187.6-1992 16mm groove system combination fixture guide countersink hole drilling template

Natural Gas Processor's Association (NGPA), Six-hole plate orifice plate

GPA TP-13-1985 Experimental Orifice Meter Studies

ES-AENOR, Six-hole plate orifice plate

UNE 57-076-1992 Board. Determination of puncture resistance

Aerospace Industries Association/ANSI Aerospace Standards, Six-hole plate orifice plate

AIA/NAS NAS500-2011 SPACER, NUT, PLATE, COUNTERSUNK Rev 9
AIA/NAS NASM51976-1998 Setscrew-Hexagon Socket, Half-Dog Point, Alloy Steel, Cadmium Plated, UNF-3A
AIA/NAS NASM51977-1998 Setscrew-Hexagon Socket, Half-Dog Point, Alloy Steel, Cadmium Plated, UNC-3A
AIA/NAS NAS 1834-1999 Insert, Molded in, Csk and Thru Clearance Hole, Sandwich Panel Revision 5; FSC5325
AIA/NAS NAS500-2014 SPACER, NUT, PLATE, COUNTERSUNK (Rev 10)
AIA/NAS NASM51981-1998 Setscrew-Hexagon Socket, Oval Point, Alloy Steel, Cadmium Plated, UNC-3A
AIA/NAS NASM51982-1998 Setscrew-Hexagon Socket, Oval Point, Alloy Steel, Cadmium Plated, UNF-3A

AIA/NAS - Aerospace Industries Association of America Inc., Six-hole plate orifice plate

NAS500-1992 Nut Spacer@ Plate - Countersunk (Rev 8)
NAS500-1973 Nut Spacer@ Plate - Countersunk (Rev 7)
NAS500-2017 SPACER@ NUT@ PLATE@ COUNTERSUNK (Rev 11)
NAS500-2011 SPACER@ NUT@ PLATE@ COUNTERSUNK (Rev 9)
NAS500-2014 SPACER@ NUT@ PLATE@ COUNTERSUNK (Rev 10)
NAS1834-1994 Insert@ Molded in@ Csk and Thru Clearance Hole@ Sandwich Panel (Rev 4)
NAS1834-1999 Insert@ Molded in@ Csk and Thru Clearance Hole@ Sandwich Panel (Rev 5)

Professional Standard - Textile, Six-hole plate orifice plate

FZ/T 92043-1995 Melt spinning special-shaped hole spinneret
FZ/T 92038-1995 Melt spinning circular hole spinneret
FZ/T 92043-2023 Melt spinning special hole spinneret
FZ/T 92038-2023 Round hole spinneret for melt spinning

British Standards Institution (BSI), Six-hole plate orifice plate

BS 6511:1984 Specification for designation of perforations in industrial plate screens
BS ISO 13319-1:2021 Determination of particle size distribution. Electrical sensing zone method. Aperture/orifice tube method
BS 1722-14:2017 Tracked Changes. Fences. Specification for open mesh steel panel
BS ISO 16630:2017 Metallic materials. Sheet and strip. Hole expanding test
BS EN ISO 10642:2004 Hexagon socket countersunk head screws

American Welding Society (AWS), Six-hole plate orifice plate

WRC 124:1967 A Study of Perforated Plates with Square Penetration Patterns
WRC 080:1962 Part 1: Analysis Of A Perforated Circular Plate Containing A Rectangular Array Of Holes

VN-TCVN, Six-hole plate orifice plate

TCVN 2230-2007 Test sieves.Metal wire cloth,perforated metal plate and electroformed sheet.Nominal sizes of openings

AT-ON, Six-hole plate orifice plate

ONORM A 5504-1988 Packaging testing; puncture test for board and corrugated fibreboard
ONORM A 2132-1988 Drafting triangles with central openings for educational purposes

European Committee for Standardization (CEN), Six-hole plate orifice plate

EN 622-4:1997 Fibreboards - Specifications - Part 4: Requirements for Softboards

Professional Standard - Energy, Six-hole plate orifice plate

NB/T 20424-2017 Set requirement for flow restrictors in nuclear power plant

Danish Standards Foundation, Six-hole plate orifice plate

DS/EN 120:1985 Formaldehyde determination on particle boards. Perforator method
DS/EN 123100+A1:1998 Sectional Specification: Single and double-sided printed boards with plain holes

National Aeronautics and Space Administration (NASA), Six-hole plate orifice plate

NASA-CR-132548-1974 Shear buckling of square perforated plates
NASA-TN-D-5467-1969 Discharge coefficients for thick plate orifices with approach flow perpendicular and inclined to the orifice axis

Standard Association of Australia （SAA）, Six-hole plate orifice plate

AS/NZS 4266.22:2004 Reconstituted wood-based panels - Methods of test - Porosity of laminated surface

Aerospace Industries Association, Six-hole plate orifice plate

AIA NAS 500-1992 Nut Spacer, Plate - Countersunk (Rev. 8)

AENOR, Six-hole plate orifice plate

UNE 27361:1974 DECK INLETS FOR DRILL AND FILLING.

GB-REG, Six-hole plate orifice plate

REG NACA-ARR-1942 The Strength and Stiffness of Shear Webs With and Without Lightening Holes

(U.S.) Ford Automotive Standards, Six-hole plate orifice plate

FORD ESE-M8G201-A-1991 GASKET, PERFORATED - STEEL CORE - COMPRESSED GRAPHITE SHEET
FORD FLTM BQ 005-06-2000 TERNE COAT POROSITY TEST

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Six-hole plate orifice plate

IPC TM-650 2.4.8.1-1986 Peel Strength, Metal Foil (Keyhole Method for Thin Laminates)

Lithuanian Standards Office , Six-hole plate orifice plate

LST EN 123100+A1-2001 Sectional Specification: Single and double-sided printed boards with plain holes

IECQ - IEC: Quality Assessment System for Electronic Components, Six-hole plate orifice plate

PQC 89-1990 Sectional Specification: Single and Double-Sided Printed Boards with Plain Holes

国家能源局, Six-hole plate orifice plate

NB/T 20572-2019 Technical Guidelines for Commissioning of Current Limiting Orifice Plate in Nuclear Power Plants

NL-NEN, Six-hole plate orifice plate

NEN 2560-1980 Test sieves Wirescreens and perforated plates with round and square holes