ZH
RU
ES
Orifice plate
Orifice plate, Total:280 items.
In the international standard classification, Orifice plate involves: Pipeline components and pipelines, Particle size analysis. Sieving, Shipbuilding and marine structures in general, Coatings and related processes used in aerospace industry, Laboratory medicine, Analytical chemistry, Fasteners, FLUID SYSTEMS AND COMPONENTS FOR GENERAL USE, Water quality, Valves, Measurement of fluid flow, Construction materials, Equipment for the chemical industry, Seals, glands, Measurement of force, weight and pressure, Nuclear energy engineering, Machine tool systems, Printed circuits and boards, Equipment for petroleum and natural gas industries, Vocabularies, Installations in buildings, Hand-held tools, Air quality, Equipment for processing of minerals, Non-ferrous metals, Protection of and in buildings, Internal combustion engines for road vehicles, Road engineering, Textile machinery, Paper and board, Environmental protection, Ground service and maintenance equipment, Components for aerospace construction, Milk and milk products, General methods of tests and analysis for food products, Cutting tools, Diagnostic, maintenance and test equipment, Road vehicle systems, Terminology (principles and coordination), Soil quality. Pedology.
ESDU - Engineering Sciences Data Unit, Orifice plate
- ESDU 81039 C-2007 Flow of liquids. Pressure losses across orifice plates@ perforated plates and thick orifice plates in ducts.
- ESDU 81039 B-1985 FLOW OF LIQUIDS Pressure losses across orifice plates@ perforated plates and thick orifice plates in ducts
- ESDU 82009 C-1993 COMPRESSIBLE FLOW OF GASES Pressure losses across orifice plates@ perforated plates and thick orifice plates in ducts
- ESDU 82009 D-2007 Compressible flow of gases. Pressure losses and discharge coefficients of orifice plates@ perforated plates and thick orifice plates in ducts.
- TN 07007-2007 Incompressible flow through orifice plates – a review of the data in the literature
- TN 07007 B-2012 Incompressible flow through orifice plates – a review of the data in the literature
- TN 07007 A-2009 Incompressible flow through orifice plates – a review of the data in the literature
- TN 10013-2011 CFD validation studies for incompressible flow through square-edged orifice plates
- ESDU 74004 A-1976 Normal incidence absorption coefficients and acoustic impedances of single layer perforated sheet liners.
- DWN TN10013-2011 CFD validation studies for incompressible flow through square-edged orifice plates (Issue 5)
- DWN TN10013-2010 CFD validation studies for incompressible flow through square-edged orifice plates (Issue 1)
- CFD-BPG 11010-2011 CFD Best Practice Guidelines for modelling pressure losses and flow characteristics in square-and knife-edged orifice plates
- DWN CFD-BPG 11010-2011 CFD Best Practice Guidelines for Modelling pressure losses and flow characterisitcs in square-edge orifice plates (Issue 2)
American Society of Mechanical Engineers (ASME), Orifice plate
American National Standards Institute （ANSI), Orifice plate
RO-ASRO, Orifice plate
German Institute for Standardization, Orifice plate
- DIN 24041:2021 Perforated plates - Dimensions
- DIN 24041:2022-06 Perforated plates - Dimensions
- DIN 24041:2022 Perforated plates - Dimensions
- DIN 24041:2002 Perforated plates - Dimensions
- DIN 82024:1990 Round eye plates
- DIN 82024:2018 Round eye plates
- DIN 4185-2:2000 Terms and symbols for screening surfaces - Part 2: Perforated plates
- DIN 16760-1:2008-06 Tools for moulding - Part 1: Machined, undrilled plates
- DIN 86042:1978 Dummy Hole Plates (Spectacle Flanges); Mating Dimensions according to Nominal Pressure 10 and 16
- DIN 83202-5:2009-07 Ladders on ships - Part 5: Ladders with rungs made of perforated plates
- DIN 4185-2 Beiblatt 1:2003-12 Terms and symbols for screening surfaces - Part 2: Perforated plates; Examples to be used in other technical areas
- DIN 4185-2:2000-05 Terms and symbols for screening surfaces - Part 2: Perforated plates
- DIN 1229:1996 Masses per unit area for gully tops and manhole tops for vehicular and pedestrian areas
- DIN 64805:1984 Double lift dobbies; cards, matrices
- DIN 83202-5:2009 Ladders on ships - Part 5: Ladders with rungs made of perforated plates
- DIN 9805:2017-02 Food processing machinery - Precutter and holeplates for mincers - System Unger
- DIN ISO 2194:1998-12 Industrial screens - Woven wire cloth, perforated plate and electroformed sheet - Designation and nominal sizes of openings (ISO 2194:1991) / Note: To be replaced by DIN ISO 2194 (2015-11).
- DIN 28182:2007-09 Tubular heat exchangers - Tube pitches, diameter of bores in tube sheets, baffles and support plates
- DIN 52298-1:1998 Road vehicles - Measurement of scattered light of safety glazing materials for vehicle glazing - Part 1: Annular diaphragm method
- DIN ISO 565:1998 Test sieves - Metal wire cloth, perforated metal plate and electroformed sheet - Nominal sizes of openings (ISO 565:1990)
- DIN 4185-2 Bb.1:2003 Terms and symbols for screening surfaces - Part 2: Perforated plates; Examples to be used in other technical areas
Professional Standard-Ships, Orifice plate
HU-MSZT, Orifice plate
Society of Automotive Engineers (SAE), Orifice plate
- SAE AMS2407E-1985 Plating, Chromium, Porous
- SAE J968-2-2021 Diesel Injection Pump Testing Part 2: Orifice Plate Flow Measurement
- SAE J968-2-2002 Diesel Injection Pump Testing Part 2: Orifice Plate Flow Measurement
- SAE J968/2-1995 Diesel Injection Pump Testing--Part 2: Orifice Plate Flow Measurement
- SAE J968/2-1991 Diesel Injection Pump Testing--Part 2: Orifice Plate Flow measurement
- SAE J968/2-2021 Diesel Injection Pump Testing—Part 2: Orifice Plate Flow Measurement
- SAE J968/2-2002 Diesel Injection Pump Testing—Part 2: Orifice Plate Flow Measurement
- SAE J968/2-2015 Diesel Injection Pump Testing—Part 2: Orifice Plate Flow Measurement
Group Standards of the People's Republic of China, Orifice plate
- T/SZAS 41-2021 Performance verification of deep well plate
- T/CASME 535-2023 Cell culture microtiter plate
- T/CPCA 4403-2010 Backup board for printed circuit board drilling
- T/CPCA 4402-2010 Entry board for printed circuit board drilling
- T/ZGWJHXH 42-2020 Safety Technology of Welded Orifice Plate Flowmeter for Pressure Gathering in Annular Chamber
- T/NAIA 092-2021 Determination of Formaldehyde Concentration in Indoor Air by Microplate Method
- T/CIFST 004-2021 Determination of vitamin B12 in food pre-coated microporous plate microbiological method
- T/SATA 0002-2017 Determination of folic acid (folate activity) content in food for infants and young children and dairy products Microplate method
CZ-CSN, Orifice plate
American Society for Testing and Materials (ASTM), Orifice plate
- ASTM E454-11 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
- ASTM E454-12 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
- ASTM E454-09 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
- ASTM E323-11(2021) Standard Specification for Perforated-Plate Sieves for Testing Purposes
- ASTM E454-80(2004) Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
- ASTM E674-80(2004) Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
- ASTM E674-80(2001) Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
- ASTM E674-09 Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
- ASTM E454-12(2021) Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
- ASTM E674-12(2021) Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
- ASTM E454-12(2016) Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
- ASTM E674-12(2016) Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
- ASTM E323-11(2016) Standard Specification for Perforated-Plate Sieves for Testing Purposes
- ASTM E323-80(1996)e1 Standard Specification for Perforated-Plate Sieves for Testing Purposes
- ASTM E674-80(1996)e1 Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
- ASTM E454-80(1996)e1 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
- ASTM E674-11 Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
- ASTM E674-12 Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
- ASTM E323-80(2004) Standard Specification for Perforated-Plate Sieves for Testing Purposes
- ASTM E454-80(2001) Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Orifice plate
- GB/T 6003.2-1997 Test sieves of perforated metal plate
- GB 12987-1997 Concrete hollow floor slab for rural houses
- GB 12987-1991 Concrete hollow floor slab for rural houses
- GB/T 21446-2008 Measurement of natural gas flow by means of standard orifice meter
- GB 12987-2008 Concrete hollow floor slab and complete sets for village constructs
- GB/T 6005-2008 Test sieves.Metal wire cloth,perforated metal plate and electroformed sheet.Nominal sizes of openings
- GB/T 6005-1997 Test sieves--Metal wire cloth, perforated metal plate and electroformed sheet--Nominal sizes of opening
- GB/T 19360-2004 Industrial plate screens—Specifications and test methods
- GB/T 19360-2003 Industrial plate screens--Specifications and test methods
- GB/T 12620-1990 Slots with round end and slots with square end plate screens
- GB/T 10612-2003 Industrial plate screens--Thickness below 3mm-Round and square holes
- GB/T 12620-2008 Round and elongated apertures with round and square plate screens
- GB/T 10613-2003 Industrial plate screens-Thickness of 3mm and above-Round and square holes
- GB/T 6003.2-2012 Test sieves.Technical requirements and testing.Part 2:Test sieves of metal wire cloth
United States Navy, Orifice plate
Professional Standard - Machinery, Orifice plate
工业和信息化部, Orifice plate
Indonesia Standards, Orifice plate
TR-TSE, Orifice plate
Professional Standard - Chemical Industry, Orifice plate
- HG/T 21559.2-2005 Stainless steel perforated plate corrugated packing standard
- HG/T 21559.1-1995 Stainless steel mesh plate corrugated packing
- HG/T 21559.1-2013 Engineering technical specification for stainless steel punched-mesh corrugated-sheet structured packings
IN-BIS, Orifice plate
Natural Gas Processor's Association (NGPA), Orifice plate
RU-GOST R, Orifice plate
- GOST 26969-1986 Standard orifice plates for flowmeters. Specifications
- GOST 8.586.2-2005 State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by means of orifice instruments. Part 2. Orifice plates. Technical requirements
American Welding Society (AWS), Orifice plate
- WRC 124:1967 A Study of Perforated Plates with Square Penetration Patterns
- WRC 151:1970 Further Theoretical Treatment of Perforated Plates with Square Penetration Patterns
- WRC 052:1959 Part 1: A Review, Comparison And Modification Of Present Deflection Theory For Flat Perforated Plates
- WRC 307:1985 Fatigue and Creep Rupture Damage of Perforated Plates Subjected to Cyclic Plastic Straining in Creep Regime
- WRC 180:1973 Elastic-Plastic Bending of a Constrained Circular Perforated Plate Under Uniform Pressure (Triangular Penetration Pattern)
International Organization for Standardization (ISO), Orifice plate
- ISO 7806:1983 Industrial plate screens; Codification for designating perforations
- ISO 7805-2:1987 Industrial plate screens; Part 2 : Thickness below 3 mm
- ISO 7805-1:1984 Industrial plate screens; Part 1 : Thickness of 3 mm and above
- ISO 10630:1994 Industrial plate screens - Specifications and test methods
- ISO 565:1990 Test sieves; metal wire cloth, perforated metal plate and electroformed sheet; nominal sizes of openings
- ISO 13319-1:2021 Determination of particle size distribution - Electrical sensing zone method - Part 1: Aperture/orifice tube method
- ISO 7440-2:1991 Road vehicles; fuel injection equipment testing; part 2 orifice plate flow-measurement
- ISO/DTS 4985 | IDF/RM 255 Milk and milk products — Determination of alkaline phosphatase activity — Fluorimetric microplate method
- ISO/TS 4985:2023 | IDF/RM 255:2023 Milk and milk products — Determination of alkaline phosphatase activity — Fluorimetric microplate method
- ISO 565:1983 Test sieves — Woven metal wire cloth, perforated plate and electroformed sheet — Nominal sizes of openings
- ISO 3310-2:1982 Test sieves — Technical requirements and testing — Part 2: Test sieves of metal perforated plate
- ISO/TR 3313:1974 Measurement of pulsating fluid flow in a pipe by means of orifice plates, nozzles or Venturi tubes, in particular in the case of sinusoidal or square wave intermittent periodic-type fluctuations
- ISO 3310-2:2013 Test sieves.Technical requirements and testing.Part 2: Test sieves of perforated metal plate
- ISO/TR 3313:1992 Measurement of pulsating fluid flow in a pipe by means of orifice plates, nozzles or Venturi tubes
- ISO 3310-2:1999 Test sieves - Technical requirements and testing - Part 2: Test sieves of perforated metal plate
- ISO 2194:1991 Industrial screens; woven wire cloth, perforated plate and electroformed sheet; designation and nominal sizes of openings
- ISO 7440-2:1985 Road vehicles; Fuel injection equipment testing; Part 2 : Orifice plate flow measurement
- ISO 5167:1980 Measurement of fluid flow by means of orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full
- ISO 20130:2018 Soil quality - Measurement of enzyme activity patterns in soil samples using colorimetric substrates in micro-well plates
Professional Standard - Energy, Orifice plate
- NB/T 20424-2017 Set requirement for flow restrictors in nuclear power plant
FI-SFS, Orifice plate
National Aeronautics and Space Administration (NASA), Orifice plate
WRC - Welding Research Council, Orifice plate
- BULLETIN 124-1967 A STUDY OF PERFORATED PLATES WITH SQUARE PENETRATION PATTERNS
- BULLETIN 52-1959 A REVIEW@ COMPARISON AND MODIFICATION OF PRESENT DEFLECTION THEORY FOR FLAT PERFORATED PLATES CORRELATION OF EXPERIMENTAL DATA WITH THEORY FOR PERFORATED PLATES WITH A TRIANGULAR HOLE ARRAY
- BULLETIN 80-1962 ANALYSIS OF A PERFORATED CIRCULAR PLATE CONTAINING A RECTANGULAR ARRAY OF HOLES STRESSES AND DEFLECTIONS IN LATERALLY LOADED PERFORATED PLATES
- BULLETIN 151-1970 FURTHER THEORETICAL TREATMENT OF PERFORATED PLATES WITH SQUARE PENETRATION PATTERNS
- BULLETIN 180-1973 ELASTIC-PLASTIC BENDING OF A CONSTRAINED CIRCULAR PERFORATED PLATE UNDER UNIFORM PRESSURE (TRIANGULAR PENETRATION PATTERN)
- BULLETIN 307-1985 FATIGUE ANMD CREEP RUPTURE DAMAGE OF PERFORATED PLATES SUBJECTED TO CYCLIC PLASTIC STRAINING IN CREEP REGIME
Association Francaise de Normalisation, Orifice plate
- NF E29-210:2007 Industrial pipework - Orifice flanges for differential pressure devices.
- NF J46-128:1951 Shipbuilding. Ventilators. Lifting bracket and dirt traps.
- NF X11-509:1983 Tamis et tamisage - Tableau de correspondance des tôles perforées dans les tamis de contrôle
- NF X11-505:1999 Test sieves - Technical requirements and testing - Test sieves of perforated metal plate.
- NF R16-332-2*NF ISO 7440-2:1993 Road vehicles. Fuel injection equipment testing. Part 2 : orifice plate flow-measurement.
- NF X11-505:1994 TEST SIEVES. TECHNICAL REQUIREMENTS AND TESTING. PART 2 : TEST SIEVES OF PERFORATED METAL PLATE.
- NF X11-514*NF ISO 3310-3:1991 Test sieves. Technical requirements and testing. Part 3 : test sieves of electroformed sheets.
- X10-105:1992 Measurement of pulsating fluid flow in a pipe by means of orifice plates, nozzles or venturi tubes.
- NF ISO 2194:1991 Cribles et tamis industriels - Tissus métalliques, tôles perforées et feuilles électroformées - Désignation et dimensions nominales des ouvertures.
- NF X11-506*NF ISO 2194:1991 Industrial screens. Wowen wire cloth, perforated plate and electroformed sheet. Designation and nominal sizes of openings.
- XP V03-147:2020 Produits alimentaires - Détermination des mycotoxines - Guide d'utilisation des kits immunoenzymatiques format microplaques (kits ELISA)
国家能源局, Orifice plate
- NB/T 20572-2019 Technical Guidelines for Commissioning of Current Limiting Orifice Plate in Nuclear Power Plants
Professional Standard - Aviation, Orifice plate
Korean Agency for Technology and Standards (KATS), Orifice plate
Professional Standard - Petroleum, Orifice plate
- SY/T 6143-1996 Standard orifice measurement method for natural gas flow
- SY/T 6143-2004 Measuring Natural Gas Flow with a Standard Orifice Flow Meter
National Metrological Technical Specifications of the People's Republic of China, Orifice plate
- JJF 1849-2020 Calibration Specification for Microplate Chemiluminescence Analyzers
AENOR, Orifice plate
- UNE 40198:1974 CONES WITH PERFORATED PLATE FOR YARNS OF HARD FIBRES.
- UNE 7050-4:1997 TEST SIEVES AND TEST SIEVING. PART 4: TECHNICAL REQUIREMENTS AND TESTING OF PERFORATED METAL PLATE.
IPC - Association Connecting Electronics Industries, Orifice plate
European Committee for Standardization (CEN), Orifice plate
- EN 622-4:1997 Fibreboards - Specifications - Part 4: Requirements for Softboards
- EN ISO 5167-2:2022 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates (ISO 5167-2:2022)
- EN ISO 20130:2020 Soil quality - Measurement of enzyme activity patterns in soil samples using colorimetric substrates in micro-well plates (ISO 20130:2018)
Defense Logistics Agency, Orifice plate
- DLA MIL-S-12875 B NOTICE 1-1997 SHEET, PERFORATED, METAL
- DLA MIL-S-12875 B-1969 SHEET, PERFORATED, METAL
- DLA MIL-DTL-5423/7 G-2009 BOOT, DUST AND WATER SEAL, TYPE B (FOR PUSHBUTTON SWITCHES), STYLE 2 (ONE ?HOLE MOUNTING, DRILLED PANEL), STYLE 2S (RFI-SHIELDED, ONE ?HOLE MOUNTING, DRILLED PANEL)
YU-JUS, Orifice plate
- JUS L.J9.012-1989 Test sieves. Metal perforated plate. Technical reguirosents and testing
- JUS L.J9.010-1989 Test sieves. Waven metal vire clotb, perforated plate and electroformed sbeet. Noajiual sizes of openings
- JUS L.H2.015-1989 Measurement of fluid f/ow by means of orifice plates, nozzles and venturi tubes inserted in circular cross-saction conduits running full
ES-AENOR, Orifice plate
Japanese Industrial Standards Committee (JISC), Orifice plate
- JIS Z 8801-2:2022 Test sieves -- Part 2: Test sieves of perforated metal plate
- JIS A 6305:1978 Perforated aluminium panel for acoustic use
- JIS D 3637-2:2003 Road vehicles -- Diesel fuel injection equipment testing -- Part 2: Orifice plate flow-measurement
机械工业部, Orifice plate
- JB/T 6190.2-1992 16mm groove system combination clamp and other parts transition screw hole plate
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Orifice plate
- GB/T 12987-2008 Concrete hollow floor slab and complete sets for village constructs
ISA - International Society of Automation, Orifice plate
- ISA RP3.2-1978 FLANGE MOUNTED SHARP EDGED ORIFICE PLATES FOR FLOW MEASUREMENT
National Metrological Verification Regulations of the People's Republic of China, Orifice plate
- JJG(石油) 02-1990 Verification rules for standard orifice plate for natural gas flow measurement
Taiwan Provincial Standard of the People's Republic of China, Orifice plate
API - American Petroleum Institute, Orifice plate
- API MPMS 14.3.3-2013 Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids-Concentric@ Square-edged Orifice Meters Part 3: Natural Gas Applications (FOURTH EDITION)
- API REPORT 1-1976 Orifice Coefficients for Two-Phase Flow Through Velocity Controlled Subsurface Safety Valves
- API MPMS 14.3.1-2012 Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids-Concentric@ Square-edged Orifice Meters Part 1: General Equations and Uncertainty Guidelines (FOURTH EDITION; ERTA: July 2013)
- API MPMS 14.3.2-2016 Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids - Concentric@ Square‐edged Orifice Meters Part 2: Specification and Installation Requirements (Fifth Edition; ERTA 1: March 2017; ERTA 2: January 2019)
British Standards Institution (BSI), Orifice plate
- BS ISO 13319-1:2021 Determination of particle size distribution. Electrical sensing zone method. Aperture/orifice tube method
- PD ISO/TS 4985:2023 Milk and milk products. Determination of alkaline phosphatase activity. Fluorimetric microplate method
- 19/30390587 DC BS ISO 13319-1. Determination of particle size distribution. Electrical sensing zone method. Part 1. Aperture/orifice tube method
- BS EN ISO 5167-2:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Orifice plates
- BS 1722-14:2017 Tracked Changes. Fences. Specification for open mesh steel panel
- BS 7579:1992 Specification for designation and nominal sizes of openings for woven wire cloth, perforated plate and electroformed sheet for industrial screens
- BS ISO 20130:2018 Soil quality. Measurement of enzyme activity patterns in soil samples using colorimetric substrates in micro-well plates
- BS DD ISO/TS 22939:2010 Soil quality. Measurement of enzyme activity patterns in soil samples using fluorogenic substrates in micro-well plates
IT-UNI, Orifice plate
SAE - SAE International, Orifice plate
- SAE J968-2-1991 Diesel Injection Pump Testing - Part 2: Orifice Plate Flow Measurement
VN-TCVN, Orifice plate
- TCVN 2230-2007 Test sieves.Metal wire cloth,perforated metal plate and electroformed sheet.Nominal sizes of openings
American Gas Association, Orifice plate
- AGA REPORT 3-3-2013 Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids - Concentric, Square-edged Orifice Meters Part 3: Natural Gas Applications (Fourth Edition; XQ1304)
PL-PKN, Orifice plate
- PN M53950-1965 Measurement of fluid flow by means of orifice plates, nozzles and Venturi tubes
Anhui Provincial Standard of the People's Republic of China, Orifice plate
- DB34/T 3187-2018 Calibration method of flow meter orifice plate in gas drainage system in coal mine
BE-NBN, Orifice plate
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Orifice plate
- ASHRAE 41.8-1989 Standard Methods of Measurement of Flow of Liquids in Pipes Using Orifice Flowmeters
Compressed Gas Association (U.S.), Orifice plate
- CGA E-7-2013 MEDICAL GAS PRESSURE REGULATORS, FLOWMETERS, AND ORIFICE FLOW SELECTORS
未注明发布机构, Orifice plate
- BS ISO/TR 15377:1998(1999) Measurement of fluid flow by means of pressure differential devices — Guidelines for specification of nozzles and orifice plates beyond
SE-SIS, Orifice plate
Association of German Mechanical Engineers, Orifice plate
- VDI/VDE 2041-1991 Measurement of fluid flow with primary devices; orifice plates and nozzles for special applications
Professional Standard - Commodity Inspection, Orifice plate
- SN/T 4283.1-2015 Test method of microplate gene chip at frontier port.Part 1:General technical procedure
- SN/T 4283.3-2015 Test method of microplate gene chip at frontier port.Part 3: Seven respiratory viruses
- SN/T 4283.6-2015 Test method of microplate gene chip at frontier port.Part 6:Twelve food borne pathogenic bacteria
Professional Standard - Forestry, Orifice plate
Professional Standard - Building Materials, Orifice plate