ZH
RU
ES

failure mode

failure mode, Total:94 items.

In the international standard classification, failure mode involves: Characteristics and design of machines, apparatus, equipment, Quality, Electrical engineering in general, Adhesives, Road vehicles in general, Space systems and operations, Test conditions and procedures in general, Medical equipment, Lubricants, industrial oils and related products, Aircraft and space vehicles in general, Reinforced plastics, Fibre optic communications, Bearings, Pipeline components and pipelines, Ceramics.

SAE - SAE International, failure mode

SAE AIR1707-1981 Patterns of O-Ring Failures
SAE RB9-2015 Failure Mode and Effect Analyses
SAE AS13004-2017 Process Failure Mode and Effects Analysis (PFMEA) and Control Plans

Society of Automotive Engineers (SAE), failure mode

SAE AIR1707-1994 PATTERNS OF O-RING FAILURES
SAE AIR1707C-2019 Patterns of O-Ring Failures
SAE J2886-2013 Design Review Based on Failure Modes (DRBFM)
SAE J2886-2023 Design Review Based on Failure Modes (DRBFM)
SAE J2816-2009 Guide for Reliability Analysis Using the Physics-of-Failure Process
SAE J2816-2018 Guide for Reliability Analysis Using the Physics-of-Failure Process
SAE ARP926-1967 DESIGN ANALYSIS PROCEDURE FOR FAILURE MODE, EFFECTS AND CRITICALITY ANALYSIS (FMECA)
SAE ARP5580-2001 Recommended Failure Modes and Effects Analysis (FMEA) Practices for Non-Automobile Applications

Indonesia Standards, failure mode

SNI 04-7114-2005 Analysis techniques for system reliability - Procedures for failure mode and effect analysis (FMEA)

AGMA - American Gear Manufacturers Association, failure mode

110.04-80-1980 Nomenclature Of Gear Tooth Failure Modes
91FTM6-1991 Comparing Surface Failure Modes in Bearings and Gears: Appearances versus Mechanisms

AIAG - Automotive Industry Action Group, failure mode

FEAM-2008 Potential Failure Mode & Effects Analysis
FMEA-4-2008 Potential Failure Mode and Effects Analysis (4th Edition)
MFMEA-2001 Potential Failure Mode & Effects Analysis for Tooling & Equipment (Machinery FMEA) (Version 1)
MFMEA-2-2012 Potential Failure Mode and Effects Analysis For Tooling & Equipment Machinery FMEA (2nd Edition)

Professional Standard - Military and Civilian Products, failure mode

WJ/Z 397-1997 Fuze Failure Mode and Effect Analysis

International Electrotechnical Commission (IEC), failure mode

IEC 60812:2018 Failure modes and effects analysis (FMEA and FMECA)
IEC 60812:2006 Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
IEC 60812:1985 Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)

European Committee for Standardization (CEN), failure mode

EN ISO 10365:2022 Adhesives - Designation of main failure patterns (ISO 10365:2022)
EN ISO 10365:1995 Adhesives - Designation of Main Failure Patterns (ISO 10365 : 1992)
FprEN ISO 10365:2021 Adhesives - Designation of main failure patterns (ISO/FDIS 10365:2021)
EN 16602-30-02:2014 Space product assurance - Failure modes, effects (and criticality) analysis (FMEA/FMECA)
HD 485 S1-1987 Analysis techniques for system reliability; procedure for failure mode and effects analysis (FMEA)

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, failure mode

JEDEC JEP131A-2005 Potential Failure Mode and Effects Analysis (FMEA)
JEDEC JEP131B-2012 Potential Failure Mode and Effects Analysis (FMEA)

Danish Standards Foundation, failure mode

DS/EN ISO 10365:1996 Adhesives - Designation of main failure patterns
DS-håndbog 142:2011 FMEA - Failure Mode and Effect Analysis - Practical application
DS/EN 62005-3:2001 Reliability of fibre optic interconnecting devices and passive components - Part 3: Relevant tests for evaluating failure modes and failure mechanisms for passive components
DS/ISO 13953:2001 Polyethylene (PE) pipes and fittings - Determination of the tensile strength and failure mode of test pieces from a butt-fused joint

Association Francaise de Normalisation, failure mode

NF T76-130*NF EN ISO 10365:2022 Adhesives - Designation of main failure patterns
NF EN IEC 60812:2018 Analyse des modes de défaillance et de leurs effets (AMDE et AMDEC)
NF L90-200-30-02*NF EN 16602-30-02:2015 Space product assurance - Failure modes, effects (and criticality) analysis (FMEA/FMECA)
NF C20-302:2006 Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA).
NF C93-913-3*NF EN 62005-3:2001 Reliability of fibre optic interconnecting devices and passive components - Part 3 : relevant tests for evaluating failure modes and failure mechanisms for passive components

ESDU - Engineering Sciences Data Unit, failure mode

ESDU 82025 A-1986 Failure modes of fibre reinforced laminates.

Korean Agency for Technology and Standards (KATS), failure mode

KS M ISO 10365-2004(2019) Adhesives－Designation of main failure patterns
KS C IEC 62005-3-2002(2017) Reliability of fiber optic interconnecting devices and passive components－Part 3：Relevant tests for evaluating failure modes and failure mechanisms for passive components
KS C IEC 62005-3:2002 Reliability of fiber optic interconnecting devices and passive components－Part 3：Relevant tests for evaluating failure modes and failure mechanisms for passive components

International Organization for Standardization (ISO), failure mode

ISO 10365:2022 Adhesives — Designation of main failure patterns

Standard Association of Australia （SAA）, failure mode

AS/NZS IEC 60812:2020 Failure modes and effects analysis (FMEA and FMECA)

German Institute for Standardization, failure mode

DIN EN ISO 10365:2022-05 Adhesives - Designation of main failure patterns (ISO 10365:2022); German version EN ISO 10365:2022
DIN EN ISO 10365:2020 Adhesives - Designation of main failure patterns (ISO/DIS 10365:2020); German and English version prEN ISO 10365:2020
DIN EN 60812:2006 Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) (IEC 60812:2006); German version EN 60812:2006
DIN EN ISO 10365:1995 Adhesives - Designation of main failure patterns (ISO 10365:1992); German version EN ISO 10365:1995
DIN EN 62005-3:2002-03 Reliability of fibre optic interconnecting devices and passive components - Part 3: Relevant tests for evaluating failure modes and failure mechanisms for passive components (IEC 62005-3:2001); German version EN 62005-3:2001
DIN EN 62005-3:2002 Reliability of fibre optic interconnecting devices and passive components - Part 3: Relevant tests for evaluating failure modes and failure mechanisms for passive components (IEC 62005-3:2001); German version EN 62005-3:2001
DIN EN 16602-30-02:2014 Space product assurance - Failure modes, effects (and criticality) analysis (FMEA/FMECA); English version EN 16602-30-02:2014

ES-UNE, failure mode

UNE-EN IEC 60812:2018 Failure modes and effects analysis (FMEA and FMECA) (Endorsed by Asociación Española de Normalización in November of 2018.)
UNE-EN ISO 10365:2022 Adhesives - Designation of main failure patterns (ISO 10365:2022)

IN-BIS, failure mode

IS 11137 Pt.2-1984

RU-GOST R, failure mode

GOST R 27.303-2021 Dependability in technics. Failure modes and effects analysis

Lithuanian Standards Office , failure mode

LST EN ISO 10365:2000 Adhesives - Designation of main failure patterns (ISO 10365:1992)
LST EN 62005-3-2002 Reliability of fibre optic interconnecting devices and passive components. Part 3: Relevant tests for evaluating failure modes and failure mechanisms for passive components (IEC 62005-3:2001)

GB-REG, failure mode

REG NASA-LLIS-3257-2010 Lessons Learned ?Passive Element Failure Modes and Effects

British Standards Institution (BSI), failure mode

BS EN ISO 10365:2022 Tracked Changes. Adhesives. Designation of main failure patterns
BS EN IEC 60812:2018 Tracked Changes. Failure modes and effects analysis (FMEA and FMECA)
20/30414673 DC BS EN ISO 10365. Adhesives. Designation of main failure patterns
BS EN 60812:2006 Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
BS 6143-2:1990 Guide to the economics of quality - Prevention, appraisal and failure model
BS EN 16602-30-02:2014 Space product assurance. Failure modes, effects (and criticality) analysis (FMEA/FMECA)
BS EN 62005-3:2001 Reliability of fibre optic interconnecting devices and passive optical components - Relevant tests for evaluating failure modes and failure mechanisms for passive components
PD IEC/TR 62343-6-6:2017 Dynamic modules. Design guide. Failure mode effect analysis for optical units of dynamic modules
BS ISO 12132:2017 Tracked Changes. Plain bearings. Quality assurance of thin-walled half bearings. Design FMEA
BS ISO 13953:2001+A1:2020 Polyethylene (PE) pipes and fittings. Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
BS EN 1071-3:2005 Advanced technical ceramics - Methods of test for ceramic coatings - Part 3: Determination of adhesion and other mechanical failure modes by a scratch test

未注明发布机构, failure mode

SAE AS13004-201708 Process Failure Mode and Effects Analysis (PFMEA) and Control Plans

American Society for Testing and Materials (ASTM), failure mode

ASTM D7973-14 Standard Guide for Monitoring Failure Mode Progression in Plain Bearings
ASTM D7874-13 Standard Guide for Applying Failure Mode and Effect Analysis lpar;FMEArpar; to In-Service Lubricant Testing
ASTM D5573-99(2019) Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints
ASTM D7874-13(2018) Standard Guide for Applying Failure Mode and Effect Analysis (FMEA) to In-Service Lubricant Testing
ASTM D7874-13(2022) Standard Guide for Applying Failure Mode and Effect Analysis (FMEA) to In-Service Lubricant Testing

ECSS - European Cooperation for Space Standardization, failure mode

Q-ST-30-02C-2009 Failure modes@ effects (and criticality) analysis (FMEA/FMECA) (Second Issue)

NEMA - National Electrical Manufacturers Association, failure mode

NEMA LSD 40-2014 Failure Modes for Self Ballasted Compact Fluorescent Lamps–A NEMA Update
NEMA LSD 40-2019 Failure Modes for Self-Ballasted Compact Fluorescent Lamps–A NEMA Update

American Gear Manufacturers Association, failure mode

AGMA 91FTM6-1991 Comparing Surface Failure Modes in Bearings and Gears: Appearances versus Mechanisms

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, failure mode

GB/T 7826-1987 Analysis techniques for system reliability--Procedure for failure mode and effects analysis(FMEA)
GB/T 7826-2012/IEC 60812:2006 System Reliability Analysis Technique Failure Mode and Effects Analysis (FMEA) program
GB/T 7826-2012/IEC 60812-2006 System Reliability Analysis Technique Failure Mode and Effects Analysis (FMEA) program
GB/T 7826-2012 Analysis techniques for system reliability.Procedure for failure mode and effects analysis(FMEA)
GB/T 23896-2009 Plain bearings.Quality assurance of thin.walled half bearings.Design FMEA

Group Standards of the People's Republic of China, failure mode

T/CSBME 033-2021 Guidelines for Failure Mode Effects and Criticality Analysis of Medical Electrical Equipment

AIAA - American Institute of Aeronautics and Astronautics, failure mode

S-102.2.4-2009 Performance-Based Product Failure Mode@ Effects and Criticality Analysis (FMECA) Requirements

American Institute of Aeronautics and Astronautics (AIAA), failure mode

AIAA S-102.2.4-2015 Capability-Based Product Failure Mode, Effects and Criticality Analysis (FMECA) Requirements

(U.S.) Telecommunications Industries Association , failure mode

TIA SP 3-0169-2004 Reliability of fibre optic interconnecting devices and passive optical components - Relevant tests for evaluating failure modes and failure mechanisms for passive components

TIA - Telecommunications Industry Association, failure mode

TSB-145-2003 Reliability of Passive Fiber Optic Components: Failure Modes and Mechanisms of Fiber Optic Connectors

European Committee for Electrotechnical Standardization（CENELEC）, failure mode

EN 62005-3:2001 Reliability of fibre optic interconnecting devices and passive components - Part 3: Relevant tests for evaluating failure modes and failure mechanisms for passive components
EN 60812:2006 Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)

AENOR, failure mode

UNE-EN 62005-3:2002 Reliability of fibre optic interconnecting devices and passive components -- Part 3: Relevant tests for evaluating failure modes and failure mechanisms for passive components.
UNE-ISO 13953:2011 Polyethylene (PE) pipes and fittings. Determination of the tensile strength and failure mode of test pieces from a butt-fused joint

Japanese Industrial Standards Committee (JISC), failure mode

JIS C 5750-4-3:2011 Dependability management -- Part 4-3: Analysis techniques for system reliability -- Procedure for failure mode and effects analysis (FMEA)