ZH
RU
ES
Failure Monitoring
Failure Monitoring, Total:227 items.
In the international standard classification, Failure Monitoring involves: Electronic components in general, Quality, Test conditions and procedures in general, Electrical engineering in general, Soil quality. Pedology, Plastics, Power transmission and distribution networks, Energy and heat transfer engineering in general, Farming and forestry, Geology. Meteorology. Hydrology, Solar energy engineering, Environmental protection, Corrosion of metals, Installations in buildings, Audio, video and audiovisual engineering, Telecommunications in general, Construction industry, Aerospace engines and propulsion systems, Power stations in general, Ergonomics, Fibre optic communications, Compressors and pneumatic machines, Burners. Boilers, Industrial automation systems, Furniture, Road vehicle systems, Domestic, commercial and industrial heating appliances, Water quality, Equipment for the chemical industry, Construction of waterways and ports, Protection of and in buildings, Biology. Botany. Zoology, Transport, Construction materials, General methods of tests and analysis for food products, Electricity. Magnetism. Electrical and magnetic measurements, Air quality, Agricultural machines, implements and equipment, Rotating machinery, Adhesives, Materials and articles in contact with foodstuffs, Analytical chemistry, Galvanic cells and batteries, Pipeline components and pipelines, Products of the chemical industry, Sterilization and disinfection, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Welding, brazing and soldering, IT terminal and other peripheral equipment, Medical sciences and health care facilities in general, Accident and disaster control, Vocabularies, Ceramics, Radiation measurements, Electromagnetic compatibility (EMC), Surface treatment and coating, Electrical and electronic testing, Radiation protection, Nuclear energy engineering, Insulation.
American Society for Testing and Materials (ASTM), Failure Monitoring
- ASTM D7973-14 Standard Guide for Monitoring Failure Mode Progression in Plain Bearings
- ASTM F3495-23 Standard Test Methods for Determining the Static Failure Load of Ceramic Knee Femoral Components
- ASTM D6463/D6463M-06 Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading
- ASTM D6463/D6463M-06(2012) Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading
- ASTM F2018-00(2010) Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
- ASTM E1517-13 Standard Test Method for Determining the Effectiveness of Liquid, Gel, Cream, or Shampoo Insecticides Against Human Louse Ova
- ASTM D4680-98(2011) Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
- ASTM D4680-98(2017) Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
- ASTM C1624-22 Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing
- ASTM C1624-05(2015) Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing
- ASTM D4680-98(2023) Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
CZ-CSN, Failure Monitoring
- CSN 67 6008-1962 Test of print stability at vainishing
- CSN 35 0015-1984 Methods for determining losses and efficiency of rotating electrical machinery
- CSN IEC 605-6:1992 Equipment reliability testing Part 6: Tests for the validity of a constant failure rate assumption
American National Standards Institute （ANSI), Failure Monitoring
- ANSI/VITA 51.2-2011 Physics of Failure Reliability Predictions
- ANSI/ASTM F2018:2000 Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
- ANSI/IEEE 1205Corrigendum 1:2006 Guide for Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations - Corrigendum 1: Thermal Aging Model Corrections
International Electrotechnical Commission (IEC), Failure Monitoring
- IEC 60605-6:2007 Equipment reliability testing - Part 6: Tests for the validity and estimation of the constant failure rate and constant failure intensity
- IEC 62429:2007 Reliability growth - Stress testing for early failures in unique complex systems
- IEC 61326-2-4:2006 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and f
- IEC 60034-2-1:2007 Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
- IEC 60034-2-1:2014 Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
- IEC TS 60034-2-3:2013 Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC induction motors
- IEC 61326-2-4:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and f
- IEC 61557-11:2020 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 11: Effectiveness of residual curre
- IEC 61557-11:2020 RLV Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 11: Effectiveness of residual curre
- IEC 2/1696/DTS:2013 IEC/TS 60034-2-3: Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC induction motors
SAE - SAE International, Failure Monitoring
Henan Provincial Standard of the People's Republic of China, Failure Monitoring
- DB41/T 2079-2020 Technical regulations for the construction of water and soil loss monitoring points
- DB41/T 2080-2020 Technical regulations for the application of unmanned aerial vehicle (UAV) for dynamic monitoring of soil erosion and field verification
RU-GOST R, Failure Monitoring
- GOST R 57954-2017 Plastics. Determination of the mean-failure energy by Gardner method
- GOST R IEC 60034-2-1-2009 Rotating electrical machines. Part 2-1. Standart methods for determining losses and efficiency from tests (excluding mashines for traction vehicles)
- GOST IEC/TS 60034-2-3-2015 Rotating electrical machines. Part 2-3. Specific test methods for determining losses and efficiency of converter-fed AC induction motors
PL-PKN, Failure Monitoring
- PN E06702-1989 Rotating electrical machines Methods for determining losses and. efficiency
JP-JEITA, Failure Monitoring
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Failure Monitoring
- GB/T 31960.7-2015 Technical specification of power energy efficiency monitoring system.Part 7:Technical specification for power energy efficiency monitoring terminal
- GB/T 31960.10-2016 Technical specification of power energy efficiency monitoring system.Part 10:Test specification of power energy efficiency monitor terminal
- GB/T 42435-2023 Technical Specifications for Coastal Erosion Monitoring and Disaster Loss Assessment
- GB/T 32127-2015 Guide for monitoring effect and comprehensive benefit evaluation of demand response
- GB/T 23233-2009 Evaluation in project for the construction of conversion of cropland to forest
- GB/T 16811-1997 Running result and the monitoring and testing of low-pressure boilers water-treatment equipment
- GB/T 16811-2018 Running results and monitoring of industrial boilers water-treatment equipment
- GB/T 16811-2005 Running result and the monitoring and testing for industrial boilers water.treatment equipment
- GB/T 31960.1-2015 Technical Specifications for Electric Power Energy Efficiency Monitoring System Part 1: General Rules
- GB/T 28638-2023 Heat loss test and thermal insulation effect evaluation method of thermal insulation structure of urban heating pipelines
- GB/T 28638-2012 Heat loss test for thermal insulation structure and evaluation methods for thermal insulation efficiency of district heating pipes
- GB/T 30690-2014 Monitoring requirements and evaluation of sterilization effect of small steam sterilizer
- GB/T 31960.2-2015 Technical specification of power energy efficiency monitoring system.Part 2:Function specification of master station
- GB/T 31960.8-2015 Technical specification of power energy efficiency monitoring system.Part 8:Specification of security protection
- GB/T 31960.9-2016 Technical specification of power energy efficiency monitoring system.Part 9:System testing specification
- GB/T 31960.5-2015 Technical specification of power energy efficiency monitoring system.Part 5:Design guidelines of master station
- GB/T 42642-2023 Technical Guidelines for Ecological Restoration Monitoring and Effect Evaluation of Marine Benthic Fauna Populations
- GB/T 31960.11-2016 Technical specification of power energy efficiency monitoring system.Part 11:Test specification of power energy efficiency information collection and exchange terminal
- GB/T 31960.6-2015 Technical specification of power energy efficiency monitoring system.Part 6:Technical condition of power energy efficiency information concentrate and exchange terminal
- GB/T 31960.4-2015 Technical specification for power energy efficiency monitoring system.Part 4:Function design specification of substation
Shanxi Provincial Standard of the People's Republic of China, Failure Monitoring
- DB14/T 2039-2020 Technical Specifications for Monitoring Nitrogen and Phosphorus Loss in Farmland Runoff in Hilly Areas
- DB14/T 1979-2019 Technical Specifications for Data Validity Judgment of Heavy Metal Online Monitoring System for Water Pollution Sources
Group Standards of the People's Republic of China, Failure Monitoring
- T/ZJSEE 0011-2023 Failure Detection for Anti-reflection Coatings of Photovoltaic Panels in Photovoltaic Power Station
- T/CRAAS 1039-2023 Energy efficiency monitoring and classification standards for high-efficiency air conditioning and refrigeration machine room systems
- T/CEC 5068-2022 Specifications for engineering pricing of energy efficiency monitoring information system
- T/ZPP 008-2022 Technical specification for inspection of power energy efficiency monitoring system
- T/CIECCPA 019-2023 Energy loss monitoring and energy efficiency evaluation for electric drive system
- T/GXAS 491-2023 Code of practice for monitoring harmful effects of blasting in water transport engineering
- T/GZBC 45.3-2021 Highly efficient and stable cooking fume purification systems— Part 3: On-line monitoring and control equipment technical requirements
- T/CEC 313-2020 On-line monitoring and analysis method for energy efficiency of coal-fired circulating fluidized bed boiler
- T/QZTEA 020-2023 Technical specification for energy consumption monitoring and energy efficiency evaluation of tea processing equipment
- T/CCA 029-2022 Evaluation of food contact surface cleaning effect by using ATP monitoring and limit value requirement
- T/CEC 131.11-2020 Secondary utilization of lead-acid batteries Part 11: Technical specifications for plate failure detection - potential difference method
- T/WSJD 9-2020 Technical guidelines for on-line monitoring of sterilization effect of small pressure steam sterilizers in medical institutions
Heilongjiang Provincial Standard of the People's Republic of China, Failure Monitoring
- DB23/T 1797-2016 Code for energy efficiency monitoring of coal-fired industrial boilers
- DB2308/T 109-2022 Atmospheric urban pollution distribution and pollution timeliness monitoring technical specifications
Fujian Provincial Standard of the People's Republic of China, Failure Monitoring
- DB35/T 1674-2017 Technical specification for urban heat island effect monitoring
- DB35/T 1759-2018 Technical specification for on-line monitoring of thermal efficiency of industrial boilers
Qinghai Provincial Standard of the People's Republic of China, Failure Monitoring
- DB63/T 1624-2017 Standards for Monitoring and Evaluation of Natural Forest Benefits
- DB63/T 2068-2022 Technical regulations for forest tending effectiveness monitoring and evaluation
- DB63/T 2035-2022 Benefit monitoring and evaluation specifications for grassland ecological restoration projects
Xizang Provincial Standard of the People's Republic of China, Failure Monitoring
British Standards Institution (BSI), Failure Monitoring
- BS EN ISO 11782-1:1998 Corrosion of metals and alloys - Corrosion fatigue testing - Cycles to failure testing
- BS EN 62429:2008 Reliability growth - Stress testing for early failures in unique complex systems
- BS PD CEN/TS 16817-2:2015 Ambient air. Monitoring the effects of genetically modified organisms (GMO). Pollen monitoring. Biological pollen sampling using bee colonies
- BS ISO 13953:2001+A1:2020 Polyethylene (PE) pipes and fittings. Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
- BS PD IEC/TS 60034-2-3:2013 Rotating electrical machines. Specific test methods for determining losses and efficiency of converter-fed AC induction motors
- BS EN 1071-3:2005 Advanced technical ceramics - Methods of test for ceramic coatings - Part 3: Determination of adhesion and other mechanical failure modes by a scratch test
- BS PD CEN/TS 16817-1:2015 Ambient air. Monitoring the effects of genetically modified organisms (GMO). Pollen monitoring. Technical pollen sampling using pollen mass filter (PMF) and Sigma-2-sampler
- BS IEC 62899-501-1:2019 Printed electronics - Quality assessment. Failure modes and mechanical testing. Flexible or bendable primary or secondary cells
- BS EN 60034-2-1:2007 Rotating electrical machines. Part 2-1: Standard methods for
determining losses and efficiency from
tests (excluding machines for traction
vehicles)
- BS EN 60034-2-1:2014 Rotating electrical machines. Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
- BS EN 61326-2-4:2006 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria
for insulation monitoring devices according to IEC 61557-8 and
- BS EN IEC 61557-11:2022 Tracked Changes. Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC. Equipment for testing, measuring or monitoring of protective measures. Effectiveness of residual current monitors (RCM) in TT, TN and IT systems
- 17/30370959 DC BS EN 61557-11. Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Part 11. Effectiveness of residual current monitors (RCMs) type A and type B ...
- 19/30352974 DC BS ISO 20043-1. Measurement of radioactivity in the environment. Guidelines for environmental monitoring for effective dose assessment process - Part 1. Planned and existing exposure situation
Association Francaise de Normalisation, Failure Monitoring
- FD X30-147-2015 Measurement plan for energy performance monitoring - Design and implementation
- NF EN 15336:2007 Adhésifs - Détermination du temps jusqu'à la rupture de joints collés soumis à une charge statique
- NF C20-350*NF EN 62429:2008 Reliability growth - Stress testing for early failures in unique complex systems
- NF C42-198-9:2009 Electrical safety in low voltage distribution systems up to 1 000 V ac and 1 500 V dc - Equipment for testing, measuring or monitoring of protective measures - Part 9 : equipment for insulation fault location in IT systems.
- NF C42-198-9*NF EN 61557-9:2015 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9 : equipment for insulation fault location in IT systems
- NF EN ISO 13431:2000 Géotextiles et produits apparentés - Détermination du comportement au fluage en traction et de la rupture au fluage en traction
- NF C42-198-9:2000 Electrical safety in low voltage distribution systems up to 1 kV a.c. and 1,5 kV c.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9 : equipment for insulation fault location in IT systems.
- NF X35-210*NF EN ISO 12894:2001 Ergonomics of the thermal environment - Medical supervision of individuals exposed to extreme hot or cold environments
- NF P21-386*NF EN 15736:2009 Timber structures - Test methods - Withdrawal capacity of punched metal plate fasteners in handling and erection of prefabricated trusses
- NF C51-112:2008 Rotating electrical machines - Part 2-1 : standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles).
- NF C51-112-1*NF EN 60034-2-1:2014 Rotating electrical machines - Part 2-1 : standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
- NF EN ISO 13935-1:2014 Textiles - Propriétés de résistance à la traction des coutures d'étoffes et d'articles textiles confectionnés - Partie 1 : Détermination de la force maximale avant rupture des coutures par la méthode sur bande
- NF A92-801-3:2005 Advanced technical ceramics - Methods of test for ceramic coatings - Part 3 : determination of adhesion and other mechanical failure modes by a scratch test.
- NF C46-050-2-4:2007 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4 : particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and
- NF C46-050-2-4*NF EN 61326-2-4:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4 : particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and
- NF EN ISO 13935-2:2014 Textiles - Propriétés de résistance à la traction des coutures d'étoffes et d'articles textiles confectionnés - Partie 2 : détermination de la force maximale avant rupture des coutures par la méthode d'arrachement (Grab test)
Professional Standard - Radio Television Film, Failure Monitoring
- GY/T 176-2001 Technical specification and regulation for the results of MW and SW broadcasting monitoring
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Failure Monitoring
- ASHRAE GUIDELINE 22-2012 Instrumentation for Monitoring Central Chilled-Water Plant Efficiency
- ASHRAE 4481-2001 Energy Wheel Effectiveness Evaluation@ Part II: Testing and Monitoring Energy Wheels in HAVC Applications (RP-862)
- ASHRAE 3631-1993 Prediction of Mixing Energy Loss in a Simultaneously Heated and Cooled Room: Part 1 - Experimental Analyses Factorial Effects
U.S. Environmental Protection Agency (U.S. EPA), Failure Monitoring
GB-REG, Failure Monitoring
US-FCR, Failure Monitoring
Beijing Provincial Standard of the People's Republic of China, Failure Monitoring
- DB11/T 180-2010 Energy Efficiency Monitoring and Evaluation of Industrial Boiler System
- DB11/T 1673-2019 Standards for Monitoring and Evaluation of Sponge City Construction Effects
- DB11/T 1638-2019 Data Center Energy Efficiency Monitoring and Evaluation Technical Guidelines
- DB11/T 1318-2016 Technical requirements for the application of power demand side management energy efficiency monitoring equipment
German Institute for Standardization, Failure Monitoring
- DIN EN 62005-3:2002-03 Reliability of fibre optic interconnecting devices and passive components - Part 3: Relevant tests for evaluating failure modes and failure mechanisms for passive components (IEC 62005-3:2001); German version EN 62005-3:2001
- DIN EN ISO 11782-1:2008-08 Corrosion of metals and alloys - Corrosion fatigue testing - Part 1: Cycles to failure testing (ISO 11782-1:1998); German version EN ISO 11782-1:2008
- DIN EN 62429:2008 Reliability growth - Stress testing for early failures in unique complex systems (IEC 62429:2007); German version EN 62429:2008
- DIN EN 1071-3:2005 Advanced technical ceramics - Methods of test for ceramic coatings - Part 3: Determination of adhesion and other mechanical failure modes by a scratch test; English version EN 1071-3:2005
- DIN EN 61326-2-4:2007 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and f
- DIN EN 61557-11:2009 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 11: Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and IT
Korean Agency for Technology and Standards (KATS), Failure Monitoring
- KS X 4151-2-2015(2020) Energy efficiency monitoring system for data center — Part 2: Holistic view of energy efficiency
- KS X 4151-1-2015 Energy efficiency monitoring system for data center — Part 1: General requirements
- KS C 0309-2005(2010) Ergonomic measuring criteria for the VDUs－Part 4：Limits and methods of EMF measurement for the FPD type monitor
- KS C IEC 60846-1-2014(2019) Radiation protection instrumentation — Ambient and/or directional dose equivalent(rate) meters and/or monitors for beta, X and gamma radiation — Part 1: Portable workplace and environmental meters and
- KS C IEC 61557-11-2013(2018) Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.－Equipment for testing, measuring or monitoring of protective measures－Part 11：Effectiveness of residual curren
Indonesia Standards, Failure Monitoring
- SNI 8072-2016 Cara uji pengukuran potensi keruntuhan tanah di laboratorium
Society of Automotive Engineers (SAE), Failure Monitoring
- SAE AIR4985-2005 A Methodology for Quantifying the Performance of an Engine Monitoring System
- SAE AIR5120-2006 Engine Monitoring System Reliability and Validity
- SAE J2453-1999 Manual Transmission and Transaxle Efficiency and Parasitic Loss Measurement
- SAE J2453-2011 Manual Transmission and Transaxle Efficiency and Parasitic Loss Measurement
Hunan Provincial Standard of the People's Republic of China, Failure Monitoring
- DB43/T 1647-2019 Technical Specifications for Urban Forest Ecological Benefit Monitoring
- DB43/T 562-2010 Technical Guidelines for Monitoring and Evaluation of Energy Saving Effects of Industrial Boiler Systems
Shaanxi Provincial Standard of the People's Republic of China, Failure Monitoring
- DB61/T 1695-2023 Technical regulations for remote sensing monitoring of urban heat island effect
Guangxi Provincial Standard of the People's Republic of China, Failure Monitoring
- DB45/T 1557-2017 Technical Regulations for Monitoring Sugarcane Field Surface Runoff and Underground Leaching Nitrogen and Phosphorus Loss
International Organization for Standardization (ISO), Failure Monitoring
- ISO/DIS 7726 Ergonomics of the thermal environment — Instruments for measuring and monitoring physical quantities
- ISO 13953:2001 Polyethylene(PE) pipes and fittings - Determination of the tensile strengt and failure mode of test pieces from a butt-fused joint
- ISO 20043-2:2023 Measurement of radioactivity in the environment — Guidelines for effective dose assessment using environmental monitoring data — Part 2: Emergency exposure situation
- ISO/FDIS 20043-2 Measurement of radioactivity in the environment — Guidelines for effective dose assessment using environmental monitoring data — Part 2: Emergency exposure situation
Lithuanian Standards Office , Failure Monitoring
- LST EN 62005-3-2002 Reliability of fibre optic interconnecting devices and passive components. Part 3: Relevant tests for evaluating failure modes and failure mechanisms for passive components (IEC 62005-3:2001)
- LST EN ISO 14329:2004 Resistance welding - Destructive tests of welds - Failure types and geometric measurements for resistance spot, seam and projection welds (ISO 14329:2003)
- LST EN 60034-2-1-2008 Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) (IEC 60034-2-1:2007)
- LST EN 61557-11-2009 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 11: Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and
Professional Standard - Forestry, Failure Monitoring
- LY/T 2497-2015 Technical regulation for ecological benefits monitoring of protective forest system
- LY/T 2573-2016 Specification of monitoring and evaluation of ecological benefits of returning farmland to forest project
- LY/T 3318-2022 Technical specifications for monitoring and evaluating benefits of grassland ecological construction projects
- LY/T 1757-2008 Indicators for monitoring and assessment of socio-economic impacts of the program for conversion of cropland to forests
- LY/T 1756-2008 Indicators for monitoring and assessment of socio-economic impacts of the natural forest protection program
- LY/T 1758-2008 Indicators for monitoring and assessment of socio-economic impacts of the sandification combating program for areas in the vicinity of Beijing and Tianjin
Shanghai Provincial Standard of the People's Republic of China, Failure Monitoring
- DB31/T 1143-2019 Technical specification for online monitoring of energy efficiency of air compressor system
- DB31/T 1142-2019 Technical specification for on-line monitoring of energy efficiency of gas-fired industrial boilers
- DB31/T 310010-2021 Technical Regulations for Monitoring and Evaluation of Coastal Shelterbelt Ecological Benefits
- DB31/T 1211-2020 Technical specification for energy efficiency online monitoring of centralized air conditioning system
Jiangsu Provincial Standard of the People's Republic of China, Failure Monitoring
- DB32/ 2062-2012 Boiler operation energy efficiency limit and monitoring technical requirements
- DB32/T 310010-2021 Technical Regulations for Monitoring and Evaluation of Coastal Shelterbelt Ecological Benefits
- DB32/T 4134-2021 Technical specifications for monitoring and evaluating the effectiveness of pesticides for rice pest control
Zhejiang Provincial Standard of the People's Republic of China, Failure Monitoring
- DB33/T 800-2010 Boiler operation energy efficiency limit and monitoring technical requirements
- DB33/T 310010-2021 Technical Regulations for Monitoring and Evaluation of Coastal Shelterbelt Ecological Benefits
- DB33/ 974-2015 Energy efficiency limit and monitoring technical requirements for organic heat carrier furnace operation
- DB33/T 974-2015 Energy efficiency limit and monitoring technical requirements for organic heat carrier furnace operation
国家市场监督管理总局、中国国家标准化管理委员会, Failure Monitoring
- GB/T 39173-2020 Smart factory—The effectiveness assessment methods of safety monitoring
- GB/T 41253-2022 Specification of effectiveness evaluation of safety monitoring system in process industry
- GB/T 39296-2020 Operation effect evaluation of recirculating cooling water treatment—Method of monitoring heat exchanger
工业和信息化部, Failure Monitoring
- QB/T 5623-2021 Energy efficiency monitoring and evaluation methods for panel furniture enterprises
API - American Petroleum Institute, Failure Monitoring
- API PUBL 4391-1985 Biomonitoring; Techniques for Measuring the Biological Effects of Liquid Effluents
European Committee for Standardization (CEN), Failure Monitoring
- EN 62429:2008 Reliability growth —
Stress testing for early
failures in unique
complex systems
Canadian Standards Association (CSA), Failure Monitoring
- CSA B55.1-2020 Test method for measuring efficiency and pressure loss of drain water heat recovery units
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Failure Monitoring
- ASHRAE GUIDELINE 22-2008 Instrumentation for Monitoring Central Chilled-Water Plant Efficiency Includes Access to Additional Content
Guangdong Provincial Standard of the People's Republic of China, Failure Monitoring
- DB44/T 451-2007 The monitoring and testing of running result for power station boilers water-treatment equipment
- DB44/T 2417-2023 Technical specifications for monitoring quality control of soil pollution remediation effect evaluation on construction land
Anhui Provincial Standard of the People's Republic of China, Failure Monitoring
- DB34/T 3143-2018 Gas (Oil) Boiler Energy Efficiency Operation Monitoring and Evaluation Method
- DB34/T 4483-2023 Technical regulations for quality monitoring of high-efficiency plant protection equipment pesticide application operations
- DB34/T 3346-2019 Technical regulations for quality monitoring and effect acceptance of American white moth aircraft control
Ningxia Provincial Standard of the People's Republic of China, Failure Monitoring
- DB64/T 1814-2021 Technical specifications for monitoring and evaluating benefits of returning grazing land to grassland projects
Inner Mongolia Provincial Standard of the People's Republic of China, Failure Monitoring
- DB15/T 2527-2022 Technical regulations for carbon sequestration benefit monitoring of main shrub species
- DB15/T 1937-2020 Technical regulations for monitoring ecological benefits of windbreak and sand fixation in shrub forests
- DB15/T 2381-2021 Technical regulations for monitoring the implementation effect of grassland ecological restoration projects
- DB15/T 2327-2021 Technical Regulations for Monitoring the Construction Effect of Closed and Protected Areas of Desertified Land
国家林业和草原局, Failure Monitoring
- LY/T 3257-2021 Specifications for Monitoring and Evaluation of Desertification Prevention and Control Project Benefits
- LY/T 3098-2019 Monitoring and evaluation of the benefits of shelterbelt projects in the middle and lower reaches of the Yangtze River
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Failure Monitoring
- GB/T 36079-2018 Acoustics—Procedures for determination of transmission loss, flow noise and total pressure loss coefficient for arrayed element dissipative silencers—Equivalent measurement
- GB/T 31960.3-2015 Technical specification of power energy efficiency monitoring system—Part 3: Communication protocol
Professional Standard - Electricity, Failure Monitoring
- DL/T 2035-2019 Technical requirements for centralized air-conditioning energy efficiency online monitoring system
Professional Standard - Urban Construction, Failure Monitoring
- CJ/T140-2001 Methods measuring and evaluating heat loss and thermal insulation efficiency for thermal insulation construction of heating pipeline
- CJ/T 140-2001 Methods measuring and evaluating heat loss and thermal insulation efficiency for thermal insulation construction of heating pipeline
IX-FAO, Failure Monitoring
- CAC/GL 91-2017 Principles and guidelines for monitoring the performance of national food control systems
Sichuan Provincial Standard of the People's Republic of China, Failure Monitoring
- DB51/T 1963-2015 Technical specifications for remote sensing monitoring of ecological benefits of grassland ecological projects
- DB51/T 1964-2015 Technical specifications for ground investigation of grassland ecological engineering ecological benefit monitoring
- DB51/T 1847-2014 Technical regulations for ground fixed-point monitoring of grassland ecological protection subsidy and reward mechanism for ecological benefits
- DB51/T 1965-2015 Technical Specifications for Ecological Effect Monitoring and Evaluation of Grassland Ecological Protection Subsidy and Reward Mechanism
RO-ASRO, Failure Monitoring
- STAS SR 13377-1997 Triphase induction machines. Method for determination of iron losses and efficiency in any operational system
Yunnan Provincial Standard of the People's Republic of China, Failure Monitoring
- DB53/T 815-2017 Determination of Rhenium Content in Spent Platinum-Rhenium Catalysts by Inductively Coupled Plasma Emission Spectrometry
- DB53/T 816-2017 Determination of Platinum, Palladium and Rhodium Contents in Plasma Smelted Ferroalloys of Failed Automobile Exhaust Purification Catalysts by Inductively Coupled Plasma Emission Spectrometry
Standard Association of Australia （SAA）, Failure Monitoring
- AS/NZS 1359.102.3:2000 Rotating electrical machines - General requirements - Methods for determining losses and efficiency - Three-phase cage induction motors
- AS/NZS 3580.9.17:2018 Methods for sampling and analysis of ambient air, Method 9.17: Demonstration of equivalence for ambient particulate matter monitoring methods
Danish Standards Foundation, Failure Monitoring
- DS/ISO 13953:2001 Polyethylene (PE) pipes and fittings - Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
- DS/EN ISO 14329:2003 Resistance welding - Destructive tests of welds - Failure types and geometric measurements for resistance spot, seam and projection welds
- DS/EN 61557-11:2009 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 11: Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and
European Committee for Electrotechnical Standardization（CENELEC）, Failure Monitoring
- EN 61557-9:2009 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems
- EN 61557-9:2015 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems
- EN 61557-11:2009 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 11: Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and
CENELEC - European Committee for Electrotechnical Standardization, Failure Monitoring
- EN 61557-9:1999 Electrical Safety in Low Voltage Distribution Systems up to 1 kV a.c. and 1@5 kV d.c. Equipment for Testing@ Measuring or Monitoring of Protective Measures Part 9: Equipment for Insulation Fault Location in IT Systems
AENOR, Failure Monitoring
- UNE-ISO 13953:2011 Polyethylene (PE) pipes and fittings. Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
- UNE-EN ISO 14329:2004 Resistance welding - Destructive tests of welds - Failure types and geometric measurements for resistance spot, seam and projection welds (ISO 14329:2003)
Professional Standard - Environmental Protection, Failure Monitoring
- HJ/T 356-2007 Technical specifications for validity of wastewater on-line monitoring data (on trial)
- HJ 356-2019 Technical Specifications for Data Validity Judgment of Water Pollution Source Online Monitoring System (CODCr, NH3-N, etc.)
Professional Standard - Hygiene , Failure Monitoring
- WS 310.3-2016 Central sterile supply department (CSSD).Part 3:Surveillance standard for cleaning, disinfection and sterilization
- WS 310.3-2009 Central sterile supply department(CSSD) Part III: surveillance standard for cleaning, disinfection and sterilization
AT-ON, Failure Monitoring
- ONR 24810-2021 Technical protection against rockfall - Terms and definitions, effects of actions, design, monitoring and maintenance
AASHTO - American Association of State Highway and Transportation Officials, Failure Monitoring
- TP 107-2018 Standard Method of Test for Determining the Damage Characteristic Curve and Failure Criterion Using the Asphalt Mixture Performance Tester (AMPT) Cyclic Fatigue Test
VN-TCVN, Failure Monitoring
- TCVN 6627-2A-2001 Rotating electrical machines.Part 2: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles).Measurement of losses by the calorimetric method
National Fire Protection Association (NFPA), Failure Monitoring
- NFPA 720-2012 Standard for the Installation of Carbon Monoxide (CO) Detection and Warning Equipment Effective Date: 08/31/2011
GOSTR, Failure Monitoring
- GOST IEC 60034-2-1-2017 Rotating electrical machines. Part 2-1. Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
Japanese Industrial Standards Committee (JISC), Failure Monitoring
- JIS C 4034-2-1:2011 Rotating electrical machines -- Part 2-1: Methods for determining losses and efficiency from tests of single-speed, three-phase, cage-induction motors
Professional Standard - Nuclear Industry, Failure Monitoring
- EJ/T 1010-1996 Calibration of α and β radioactive aerosol monitors and testing methods for effectiveness of radon daughter compensation
The American Road & Transportation Builders Association, Failure Monitoring
- AASHTO TP 133-2021 Standard Method of Test for Determining the Damage Characteristic Curve and Failure Criterion Using Small Specimens in the Asphalt Mixture Performance Tester (AMPT) Cyclic Fatigue Test
Underwriters Laboratories (UL), Failure Monitoring
- UL 1995 CRD-2015 UL Standard for Safety Heating and Cooling Equipment - Section / Paragraph Reference: 79.10 Subject: Correction of the water failure test (Edition 5: July 31, 2015)
Institute of Electrical and Electronics Engineers (IEEE), Failure Monitoring
- IEEE 1205/COR 1-2006 Assessing, monitoring, and mitigating aging effects on class 1E equipment used in nuclear power generating stations - Corrigendum 1: Thermal aging model; Corrections
- IEEE Std P1205-Corrigendum1, Dec 2006 IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations - Corrigendum 1: Thermal Aging Model Corrections
- IEEE Std 1205-2000/COR 1-2006 IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations - Corrigendum 1: Thermal Aging Model Corrections
- IEEE 1205-2000/Cor 1-2006 IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations - Corrigendum 1: Thermal Aging Model Corrections
ES-UNE, Failure Monitoring
- UNE-EN IEC 61557-11:2023 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 11: Effectiveness of residual current monitors (RCM) in TT, TN and IT systems