ZH
RU
ES

Surface defects

Surface defects, Total:253 items.

In the international standard classification, Surface defects involves: Fasteners, Iron and steel products, Vocabularies, Graphic technology, Ceramics, Insulating fluids, Semiconducting materials, Fibre optic communications, Electrical wires and cables, Electrical and electronic testing, Bearings, Components for electrical equipment, Magnetic materials, Linear and angular measurements, Testing of metals, Optical equipment, Seals, glands, Shipbuilding and marine structures in general, Photography, Technical drawings, Pipeline components and pipelines, Paints and varnishes, Non-destructive testing, Surface treatment and coating, Refractories, Construction of railways, Medical equipment.

SE-SIS, Surface defects

SIS 81 20 02-1973 Concrete surface blemishes
SIS 81 20 06-1973 Measurement of concrete surface blemishes

General Motors do Brasil, Surface defects

GMSA LTP 196-2011 REQUIREMENT FOR ACCEPTANCE OF SURFACE DEFECTS IN OIL PANS CRIT脡RIOS DE ACEITA脟脙O PARA DEFEITOS SUPERFICIAIS EM C脕RTERES Do Not use on New Programs; No Replacement
GMSA LTP 207-2011 Requirement for acceptance of surface defects on wheel hubs Crit茅rios de aceita莽茫o para defeitos superficiais em cubos de roda Do Not use on New Programs; No Replacement
GMSA LTP 205-2011 Requirement for acceptance of surface defects on crankshafts Crit茅rios de aceita莽茫o para defeitos superficiais em 谩rvores de manivelas Do Not use on New Programs; No Replacement
GMSA LTP 204-2011 Requirement for acceptance of surface defects on flywheels Crit茅rios de aceita莽茫o para defeitos superficiais em volantes de motor Do Not use on New Programs; No Replacement
GMSA LTP 223-2011 Requirement for acceptance of surface defects on Brake Drums Crit茅rios de aceita莽茫o para defeitos superficiais no Cilindro de Freio Do Not use on New Programs; No Replacement
GMSA LTP 198-2011 Requirement for acceptance of surface defects on bearing caps Crit茅rios de aceita莽茫o para defeitos superficiais em capas de mancal Do Not use on New Programs; No Replacement
GMSA LTP 201-2011 Requirement for acceptance of surface defects on cylinder blocks Family I Crit茅rios de aceita莽茫o para defeitos superficiais em blocos de motores Familia I Do Not use on New Programs; No Replacement
GMSA LTP 218-2011 Requirement for acceptance of surface defects on Bearing Plate Crit茅rios de aceita莽茫o para defeitos superficiais em Placa de Rolamento Do Not use on New Programs; No Replacement
GMSA LTP 197-2011 Requirements for Acceptance of Surface Defects on Brake Disc Crit茅rios para Aceita莽茫o de Defeitos Superficiais em Discos de Freio Do Not use on New Programs; No Replacement
GMSA LTP 215-2011 Requirement for acceptance of surface defects on Water Pump Body Crit茅rios de aceita莽茫o para defeitos superficiais em Corpo da Bomba de 脕gua Do Not use on New Programs; No Replacement
GMSA LTP 208-2011 Requirements for acceptance of surface defects on transmission-case Crit茅rios de aceita莽茫o para defeitos superficiais em carca莽as de transmiss茫o Do Not use on New Programs; No Replacement
GMSA LTP 217-2011 Requirement for acceptance of surface defects on Oil Pump Body Crit茅rios de aceita莽茫o para defeitos superficiais em Corpo da Bomba de 脫leo Do Not use on New Programs; No Replacement
GMSA LTP 219-2011 Requirement for acceptance of surface defects on casting connecting rod Crit茅rios de aceita莽茫o para defeitos superficiais em bielas fundidas Do Not use on New Programs; No Replacement
GMSA LTP 199-2011 Requirement for acceptance of surface defects on exhaust manifolds surface Crit茅rios de aceita莽茫o para defeitos superficiais em coletores de escape Do Not use on New Programs; No Replacement
GMSA LTP 222-2011 Requirement for acceptance of surface defects on Thermostat Housing Crit茅rios de aceita莽茫o para defeitos superficiais na Carca莽a Termost谩tica Do Not use on New Programs; No Replacement
GMSA LTP 213-2011 Requirement for acceptance of surface defects on Camshaft bracket Crit茅rios de aceita莽茫o para defeitos superficiais em Suporte da 脕rvore de Comando Do Not use on New Programs; No Replacement
GMSA LTP 206-2011 Requirement for acceptance of surface defects on engine brackets Crit茅rios de aceita莽茫o para defeitos superficiais em suportes de motor Do Not use on New Programs; No Replacement
GMSA LTP 202-2011 Requirement for acceptance of surface defects on cylinder blocks Family II Crit茅rios de aceita莽茫o para defeitos superficiais em blocos de motores Famila II Do Not use on New Programs; No Replacement
GMSA LTP 212-2011 Requirement for acceptance of surface defects on differential bearing ring Crit茅rios de aceita莽茫o para defeitos superficiais em anel do rolamento do diferencial Do Not use on New Programs; No Replacement
GMSA LTP 214-2011 Requirement for acceptance of surface defects on Gearshift Cover Crit茅rios de aceita莽茫o para defeitos superficiais em Tampa da Alavanca Do Not use on New Programs; No Replacement

NL-NEN, Surface defects

NEN-EN 493-1993 Fasteners. Surface discontinuities. Nuts

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Surface defects

GB/T 5779.2-2000 Fasteners-Surface discontinuities-Nuts
GB 5779.2-1986 Surface discontinuities of fasteners on nuts for general requirements
GB/T 5779.3-2000 Fasteners-Surface discontinuities-Bolts,screws and studs for special requirements
GB/T 5779.1-2000 Fasteners-Surface discontinuities-Bolts,screws and studs for general requirements
GB/T 42902-2023 Laser Scattering Method for Testing Surface Defects of Silicon Carbide Epitaxial Wafers
GB/T 9634.1-2002 Ferrite cores-Guide on the limits of surface irregularities--Part 1: General specification
GB/T 9634.2-2002 Ferrite cores--Guide on the limits of surface irregularities--Part 2: RM-cores
GB/T 15757-2002 Geometrical product specifications(GPS) Surface imperfections--Terms.definitions and parameters
GB/T 9634.4-2007 Ferrite cores Guide on the limits of surface irregularities Part 4: Ring-cores
GB/T 9634.3-2002 Ferrite cores--Guide on the limits of surface irregularities--Part 3: ETD-cores and E-cores

British Standards Institution (BSI), Surface defects

BS EN ISO 6157-2:2004 Fasteners - Surface discontinuities - Nuts
BS EN 60424-1:2000 Guidance of the limits of surface irregularities of ferrite cores - General specification
BS EN 60424-1:2016 Ferrite cores. Guidelines on the limits of surface irregularities. General specification
BS EN ISO 8785:1999 Geometrical product specification (GPS) - Surface imperfections - Terms, definitions and parameters
BS EN 60424-3:1999 Guidance of the limits of surface irregularities of ferrite cores - ETD-cores and E-cores
BS EN 60424-4:2001 Guidance of the limits of surface irregularities of ferrite cores - Ring cores
BS EN 60424-4:2016 Ferrite cores. Guidelines on the limits of surface irregularities. Ring-cores
BS ISO 14997:2011 Optics and photonics. Test methods for surface imperfections of optical elements
BS ISO 10110-7:2008 Optics and photonics - Preparation of drawings for optical elements and systems - Surface imperfection tolerances
BS EN ISO 21227-1:2003 Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - General guidance
BS EN 16492:2014 Paints and varnishes. Evaluation of the surface disfigurement caused by fungi and algae on coatings
BS EN 60424-5:2009 Ferrite cores - Guide on the limits of surface irregularities - Part 5:Planar-cores
BS EN 60424-3:2016 Ferrite cores. Guidelines on the limits of surface irregularities. ETD-cores, EER-cores, EC-cores and E-cores
BS ISO 14997:2017 Tracked Changes. Optics and photonics. Test methods for surface imperfections of optical elements
PD ISO/TR 14997-2:2022 Optics and photonics. Test methods for surface imperfections of optical elements. Machine vision
BS EN ISO 25178-73:2019 Geometrical product specifications (GPS). Surface texture: Areal - Terms and definitions for surface defects on material measures
BS EN ISO 10893-5:2011 Non-destructive testing of steel tubes. Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
BS EN ISO 10893-4:2011 Non-destructive testing of steel tubes. Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections
PD ISO/TR 21477:2017 Optics and photonics. Preparation of drawings for optical elements and systems. Surface imperfection specification and measurement systems
BS EN ISO 21227-3:2007 Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Evaluation of delamination and corrosion around a scribe
BS EN 10246-11:2000 Non-destructive testing of steel tubes - Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections
BS EN 10246-12:2000 Non-destructive testing of steel tubes - Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
BS EN ISO 21227-2:2007 Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Evaluation procedure for multi-impact stone-chipping test
BS EN 16729-3:2018 Railway applications. Infrastructure. Non-destructive testing on rails in track - Requirements for identifying internal and surface rail defects
BS 1902-3.13:1996 Methods of testing refractory materials. General and textural properties. Measurement of dimensions and external defects of refractory bricks. Corner and edge defects and other surface imperfections
23/30438675 DC BS ISO 5618-1. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for GaN crystal surface defects - Part 1. Classification of defects

VN-TCVN, Surface defects

TCVN 4796-1989 Nuts.Surface defects.Test methods
TCVN 4795-1989 Bolts, screws, studs.Surface defects.Test methods

Professional Standard - Aviation, Surface defects

HB 7479-1996 Repair of Surface Defects of Aluminum Alloy

Society of Automotive Engineers (SAE), Surface defects

SAE J810-1996 Classification of Common Surface Imperfections in Sheet Steel
SAE ARP4784-2000 PERFORMANCE AND EVALUATION CRITERIA, SURFACE DEFECTS, REQUIREMENTS FOR
SAE J1061-1975 Surface Discontinuities on General Application Bolts, Screws, and Studs R(1998)
SAE J349-1991 Detection of Surface Imperfections in Ferrous Rods, Bars, Tubes, and Wires

RU-GOST R, Surface defects

GOST 1759.3-1983 Nuts. Surface defects and methods of control
GOST ISO 6157-2-2015 Fasteners. Surface discontinuities. Part 2. Nuts
GOST 21014-1988 Rolled products of ferrous metals. Surfase defects. Terms and definitions
GOST 1759.2-1982 Bolts, screws and studs. Surface defects and methods of control
GOST R 59420-2021 Optics and photonics. Optical elements. Surface defects. Visual control
GOST R ISO 10893-4-2014 Seamless and welded steel tubes. Part 4. Liquid penetrant inspection for the detection of surface imperfections
GOST ISO 6157-1-2015 Fasteners. Surface discontinuities. Part 1. Bolts, screws and studs for general requirements
GOST 34004-2016 Steel casing, tubing, drill and line pipes. Surface defects of thread connections. Terms and definitions
GOST R ISO 10893-5-2016 Seamless and welded steel tubes. Part 5. Magnetic particle inspection of ferromagnetic tubes for the detection of surface imperfections

Korean Agency for Technology and Standards (KATS), Surface defects

KS B ISO 6157-2:2010 Fasteners-Surface discontinuities-Part 2:Nuts
KS C 6985-2004 Evaluation method of surface defect onfibre optic connector interfaces
KS D 0408-1999 General guide on limits of surface irregularities
KS C 6985-2014 Evaluation method of surface defect on fibre optic connector interfaces
KS C 6985-2014(2019) Evaluation method of surface defect on fibre optic connector interfaces
KS B ISO 8785-2014(2019) Geometrical Product Specification(GPS) — Surface imperfections — Terms, definitions and parameters
KS B ISO 14997:2019 Optics and photonics — Test methods for surface imperfections of optical elements
KS C IEC 60424-1:2006 Ferrite cores－Guide on the limits of surface irregularities－Part 1：General specification
KS C IEC 60424-2:2006 Ferrite cores－Guide on the limits of surface irregularities－Part 2：RM-cores
KS B ISO 6157-1:2010 Fasteners－Surface discontinuities－Part 1：Bolts, screws and studs for general requirements
KS B 0548-1995 Fasteners-Surface discontinuities.Part 2:Nuts with threads M5 to M39
KS C IEC 60424-2:2017 Ferrite cores－Guide on the limits of surface irregularities－Part 2：RM-cores
KS C IEC 60424-4:2006 Ferrite cores－Guide on the limits of surface irregularities－Part 4：Ring-cores
KS C IEC 60424-4:2017 Ferrite cores－Guide on the limits of surface irregularities－Part 4：Ring-cores
KS B ISO 14997:2004 Optics and optical instruments-Test methods for surface imperfections of optical elements
KS B ISO 14997:2014 Optics and optical instruments — Test methods for surface imperfections of optical elements
KS C IEC 60424-3:2006 Ferrite cores－Guide on the limits of surface irregularities－Part 3：ETD-cores and E-cores
KS B 0549-1995 Fasteners-surface discontinuities-Part 3:Bolts,screws and studs for special requirements
KS D ISO 13665-2002(2017) Seamless and welded steel tubes for pressure purposes－Magnetic particle inspection of the tube body for the detection of surface imperfections
KS B ISO 6157-3:2010 Fasteners-Surface discontinuities-Part 3:Bolts, screws and studs for special requirements
KS D ISO 13665:2002 Seamless and welded steel tubes for pressure purposes－Magnetic particle inspection of the tube body for the detection of surface imperfections
KS M ISO 21227-1-2009(2019) Paints and varnishes－Evaluation of defects on coated surfaces using optical imaging－Part 1：General guidance
KS L ISO 12678-2-2013(2018) Refractory products — Measurement of dimensions and external defects of refractory bricks — Part 2: Corner and edge defects and other surface imperfections
KS B ISO 10110-7:2007 Optics and optical instruments－Preparation of drawings for optical elements and systems－Part 7：Surface imperfection tolerances
KS M ISO 21227-4-2012(2017) Paints and varnishes－Evaluation of defects on coated surfaces using optical imaging－Part 4：Evaluation of filiform corrosion
KS B ISO 10110-7:2017 Optics and optical instruments－Preparation of drawings for optical elements and systems－Part 7：Surface imperfection tolerances
KS B ISO 10110-7-2017(2022) Optics and optical instruments－Preparation of drawings for optical elements and systems－Part 7：Surface imperfection tolerances
KS B ISO 10893-4:2018 Non-destructive testing of steel tubes — Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections
KS M ISO 21227-3-2012(2017) Paints and varnishes－Evaluation of defects on coated surfaces using optical imaging－Part 3：Evaluation of delamination and corrosion around a scribe

Association Francaise de Normalisation, Surface defects

NF E25-400-3*NF EN ISO 6157-2:2004 Fasteners - Surface discontinuties - Part 2 : nuts
NF A35-050:1986 Iron and steel - Bars and wire rods for drawing - Surface defects.
NF EN ISO 6157-2:2004 Éléments de fixation - Défauts de surface - Partie 2 : écrous
NF A04-121:1986 Iron and steel. Magnetic particle examination of longitudinal products. Detection of surface defects.
NF EN 26157-1:1992 Éléments de fixation - Défauts de surface - Partie 1 : vis et goujons d'usage général.
NF EN ISO 8785:1999 Spécification géométrique des produits (GPS) - Imperfections de surface - Termes, définitions et paramètres
NF S10-046:2012 Optics and photonics - Test methods for surface imperfections of optical elements.
NF S10-046*NF ISO 14997:2017 Optics and photonics - Test methods for surface imperfections of optical elements
NF C93-340-1:2000 Ferrite cores - Guide on the limits of surface irregularities - Part 1 : general specification.
NF C93-340-1*NF EN 60424-1:2016 Ferrite cores - Guidelines on the limits of surface irregularities - Part 1 : general specification
NF T30-108*NF EN 16492:2014 Paints and varnishes - Evaluation of the surface disfigurement caused by fungi and algae on coatings
NF E05-019*NF EN ISO 8785:1999 Geometrical Product Specification (GPS) - Surface imperfections - Terms, definitions and parameters
NF EN 26157-3:1992 Éléments de fixation - Défauts de surface - Partie 3 : vis et goujons pour applications particulières.
NF ISO 14997:2017 Optique et photonique - Méthodes d'essai applicables aux imperfections de surface des éléments optiques
NF B40-678-2*NF ISO 12678-2:1997 Refractory products. Measurement of dimensions and external defects of refractory bricks. Part 2 : corner and edge defects and other surface imperfections.
FD ISO/TR 14997-2:2022 Optique et photonique - Méthodes d'essai applicables aux imperfections de surface des éléments optiques - Partie 2 : Visionique
NF ISO 10110-7:2017 Optique et photonique - Indications sur les dessins pour éléments et systèmes optiques - Partie 7 : imperfection de surface
NF ISO 12678-2:1997 Produits réfractaires - Mesurage des dimensions et des défauts externes des briques réfractaires - Partie 2 : défauts d'angle et d'arête et autres imperfections de surface.
NF S10-008-7*NF ISO 10110-7:2017 Optics and photonics - Preparation of drawings for optical elements and systems - Part 7 : surface imperfections
NF EN ISO 10893-5:2011 Essais non destructifs des tubes en acier - Partie 5 : contrôle par magnétoscopie des tubes en acier ferromagnétique sans soudure et soudés pour la détection des imperfections de surface
NF EN ISO 10893-4:2011 Essais non destructifs des tubes en acier - Partie 4 : contrôle par ressuage des tubes en acier sans soudure et soudés pour la détection des imperfections de surface
NF E05-031-73*NF EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture : Areal - Part 73 : terms and definitions for surface defects on material measures
NF S10-008-7:2008 Optics and photonics - Preparation of drawings for optical elements and systems - Part 7 : surface imperfection tolerances.
NF S10-008-7:1996 Optics and optical instruments. Preparation of drawings for optical elements and systems. Part 7 : surface imperfection tolerances.
NF EN ISO 25178-73:2019 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 73 : termes et définitions pour les défauts de surface sur les mesures matérialisées
NF T30-170-4*NF EN ISO 21227-4:2008 Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 4 : evaluation of filiform corrosion.
NF EN 16729-3:2018 Application ferroviaires - Infrastructure - Essais non destructifs sur les rails de voie - Partie 3 : exigences pour l'identification des défauts internes et de surface des rails
NF A49-785-5*NF EN ISO 10893-5:2011 Non-destructive testing of steel tubes - Part 5 : magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
NF EN ISO 21227-2:2006 Peintures et vernis - Évaluation par imagerie optique des défauts des surfaces revêtues - Partie 2 : mode opératoire d'évaluation pour l'essai d'impacts multiples de cailloux

International Organization for Standardization (ISO), Surface defects

ISO 6157-2:1995 Fasteners - Surface discontinuities - Part 2: Nuts
ISO 14997:2017 Optics and optical instruments — Test methods for surface imperfections of optical elements
ISO/DIS 3643:2023 Rolling bearings — Ceramic rolling elements — Common vocabulary and characteristics of surface imperfections
ISO 14997:2011 Optics and photonics - Test methods for surface imperfections of optical elements
ISO 14997:2003 Optics and optical instruments - Test methods for surface imperfections of optical elements
ISO 6157-3:1988 Fasteners; surface discontinuities; part 3: bolts, screws and studs for special requirements
ISO 6157-1:1988 Fasteners surface discontinuities; part 1: bolts, screws and studs for general requirements
ISO/TR 14997-2:2022 Optics and photonics — Test methods for surface imperfections of optical elements — Part 2: Machine vision
ISO/PRF 5618-1:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) --Test method for GaN crystal surface defects — Part 1: Classification of defects
ISO 10110-7:2017 Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 7: Surface imperfection tolerances
ISO/TR 21477:2017 Optics and photonics — Preparation of drawings for optical elements and systems — Surface imperfection specification and measurement systems
ISO 10110-7:2008 Optics and photonics - Preparation of drawings for optical elements and systems - Part 7: Surface imperfection tolerances
ISO 25178-73:2019 Geometrical product specifications (GPS) — Surface texture: Areal — Part 73: Terms and definitions for surface defects on material measures
ISO 10893-4:2011 Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections
ISO 10893-5:2011 Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
ISO/DIS 5618-1:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) --Test method for GaN crystal surface defects — Part 1: Part 1: Classification of defects

SAE - SAE International, Surface defects

SAE ARP4784-1993 Performance and Evaluation Criteria@ Surface Defects@ Requirements for
SAE J349-1980 Detection of Surface Imperfections in Ferrous Rods@ Bars@ Tubes@ and Wires
SAE J349-2017 Detection of Surface Imperfections in Ferrous Rods@ Bars@ Tubes@ and Wires

American Society for Testing and Materials (ASTM), Surface defects

ASTM F109-12(2018) Standard Terminology Relating to Surface Imperfections on Ceramics
ASTM F109-91(1996) Standard Terminology Relating to Surface Imperfections on Ceramics
ASTM F109-04 Standard Terminology Relating to Surface Imperfections on Ceramics
ASTM F109-11 Standard Terminology Relating to Surface Imperfections on Ceramics
ASTM F109-04(2009) Standard Terminology Relating to Surface Imperfections on Ceramics
ASTM F109-12 Standard Terminology Relating to Surface Imperfections on Ceramics
ASTM F204-76(2013) Standard Test Method for Surface Flaws in Tungsten Seal Rod and Wire
ASTM F204-76(2018) Standard Test Method for Surface Flaws in Tungsten Seal Rod and Wire
ASTM F1810-97 Standard Test Method for Counting Preferentially Etched or Decorated Surface Defects in Silicon Wafers
ASTM D3274-09(2017) Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation
ASTM D3274-09(2021) Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation

German Institute for Standardization, Surface defects

DIN EN ISO 6157-2:2004 Fasteners - Surface discontinuities - Part 2: Nuts (ISO 6157-2:1995); German version EN ISO 6157-2:2004
DIN EN ISO 8785:1999 Geometrical Product Specifications (GPS) - Surface imperfections - Terms, definitions and parameters (ISO 8785:1998); German version EN ISO 8785:1999
DIN EN ISO 8785:1999-10 Geometrical Product Specifications (GPS) - Surface imperfections - Terms, definitions and parameters (ISO 8785:1998); German version EN ISO 8785:1999
DIN EN 26157-3:1991 Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988); german version EN 26157-3:1991
DIN EN 60424-1:2000 Ferrite cores - Guide on the limits of surface irregularities - Part 1: General specification (IEC 60424-1:1999); German version EN 60424-1:1999
DIN ISO 14997:2018 Optics and photonics - Test methods for surface imperfections of optical elements (ISO 14997:2017)
DIN ISO 14997:2013 Optics and photonics - Test methods for surface imperfections of optical elements (ISO 14997:2011)
DIN EN 16492:2014-09 Paints and varnishes - Evalutation of the surface disfigurement caused by fungi and algae on coatings; German version EN 16492:2014
DIN EN ISO 21227-1:2003 Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 1: General guidance (ISO 21227-1:2003); German version EN ISO 21227-1:2003
DIN EN 26157-1:1991 Fasteners; surface discontinuities; bolts, screws and studs subject to general requirements (ISO 6157-1:1988); german version EN 26157-1:1991
DIN EN 60424-3:2000 Ferrite cores - Guide on the limits of surface irregularities - Part 3: ETD-cores and E-cores (IEC 60424-3:1999); German version EN 60424-3:1999
DIN 51179:2014 Vitreous and porcelain enamels - Low-voltage test for detecting and locating defects on profiled surfaces - Slurry test
DIN EN 16492:2014 Paints and varnishes - Evalutation of the surface disfigurement caused by fungi and algae on coatings; German version EN 16492:2014
DIN EN ISO 21227-4:2008 Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 4: Evaluation of filiform corrosion (ISO 21227-4:2008); English version of DIN EN ISO 21227-4:2008-06
DIN ISO/TR 21477:2018-08*DIN SPEC 13477:2018-08 Optics and photonics - Preparation of drawings for optical elements and systems - Surface imperfection specification and measurement Systems (ISO/TR 21477:2017)
DIN ISO 10110-7:2018 Optics and photonics - Preparation of drawings for optical elements and systems - Part 7: Surface imperfections (ISO 10110-7:2017)
DIN EN ISO 10893-4:2011-07 Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO 10893-4:2011); German version EN ISO 10893-4:2011
DIN EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019)
DIN EN ISO 25178-73:2019-10 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019); German version EN ISO 25178-73:2019
DIN EN 60424-1:2016 Ferrite cores - Guidelines on the limits of surface irregularities - Part 1: General specification (IEC 60424-1:2015); German version EN 60424-1:2016
DIN EN 60424-2:2016 Ferrite cores - Guidelines on the limits of surface irregularities - Part 2: RM-cores (IEC 60424-2:2015); German version EN 60424-2:2016
DIN EN 60424-5:2009 Ferrite cores - Guide on the limits of surface irregularities - Part 5: Planar-cores (IEC 60424-5:2009); German version EN 60424-5:2009
DIN EN 60424-4:2016 Ferrite cores - Guidelines on the limits of surface irregularities - Part 4: Ring-cores (IEC 60424-4:2015); German version EN 60424-4:2016
DIN EN ISO 10893-5:2011-07 Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO 10893-5:2011); German version EN ISO 10893-5:2011
DIN EN 16729-3:2018 Railway applications - Infrastructure - Non-destructive testing on rails in track - Part 3: Requirements for identifying internal and surface rail defects

Professional Standard - Machinery, Surface defects

JB/T 8271-2015 Comparison scale for surface defect of photoconductor of electrostatic copying process
JB/T 8271-1999 Test chart for surface defect of photoconductor for electrostatic copying process
JB/T 8268-2015 Test method of surface defect for photoconductor of electrostatic copying process
JB/T 8268-1999 Standard test method for surface defect of photoconductor for electrostatic process
JB/T 10861-2008 Rolling bearings. Atlas and the assessment methods for surface imperfections of steel balls

Group Standards of the People's Republic of China, Surface defects

T/IAWBS 002-2017 Test method for surface defect of silicon carbide epitaxial wafer
T/HBZXL 005-2022 Inspection method for surface defects of stainless steel cold-rolled strip
T/GAMA 22-2021 Additive manufacturing Non-destructive testing of surface defects of metal components Laser thermography method

Taiwan Provincial Standard of the People's Republic of China, Surface defects

CNS 7633-1981 Method of Test for Surface Flaws in Tungsten Seal Rod and Wine

Anhui Provincial Standard of the People's Republic of China, Surface defects

DB34/T 1908-2013 Specification for repairing surface defects of wear-resistant steel castings

HU-MSZT, Surface defects

MSZ 229/17-1983

European Committee for Standardization (CEN), Surface defects

EN ISO 6157-2:2004 Fasteners - Surface discontinuities - Part 2: Nuts
EN ISO 8785:1999 Geometrical Product Specification (GPS) - Surface Imperfections - Terms, Definitions and Parameters ISO 8785:1998
EN 16492:2014 Paints and varnishes - Evaluation of the surface disfigurement caused by fungi and algae on coatings
EN ISO 10893-5:2011 Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO 10893-5:2011)
EN ISO 10893-4:2011 Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO 10893-4:2011)
EN 10246-11:2000 Non-Destructive Testing of Steel Tubes - Part 11: Liquid Penetrant Testing of Seamless and Welded Steel Tubes for the Detection of Surface Imperfections
EN 10246-12:2000 Non-Destructive Testing of Steel Tubes - Part 12: Magnetic Particle Inspection of Seamless and Welded Ferromagnetic Steel Tubes for the Detection of Surface Imperfections

Danish Standards Foundation, Surface defects

DS/EN ISO 8785:2000 Geometrical Product Specification (GPS) - Surface imperfections - Terms, definitions and parameters
DS/EN ISO 10893-4:2011 Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections
DS/EN ISO 10893-5:2011 Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections

未注明发布机构, Surface defects

BS EN ISO 8785:1999(2002) Geometrical Product Specification (GPS) — Surface imperfections — Terms, definitions and parameters
BS EN ISO 9341:1998 Optics and optical instruments — Contact lenses — Determination ofinclusions and surface imperfections for rigid contact lenses

Professional Standard-Ships, Surface defects

CB/T 3293-2013 Requirements for the plate surface quality evaluation and the repairs of surface defects during shipbuilding
CB/T 3293-1997 Standard for the plate surface quality evalution and the repairs of surface's defects during shipbuilding
CB/T 4275-2013 Visual method for evaluation of surface irregularities of steel castings for A kind of piping accessories

KR-KS, Surface defects

KS B ISO 14997-2019 Optics and photonics — Test methods for surface imperfections of optical elements
KS B ISO 10110-7-2017 Optics and optical instruments－Preparation of drawings for optical elements and systems－Part 7：Surface imperfection tolerances
KS B ISO 10893-4-2018 Non-destructive testing of steel tubes — Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections

International Electrotechnical Commission (IEC), Surface defects

IEC 60424-2:1997 Guidance on the limits of surface irregularities of ferrite cores - Part 2: RM-cores
IEC 60424-1:1999 Ferrite cores - Guide on the limits of surface irregularities - Part 1: General specification
IEC 60424-1:2015 Ferrite cores - Guidelines on the limits of surface irregularities - Part 1: General specification
IEC 60424-2:2015 Ferrite cores - Guidelines on the limits of surface irregularities - Part 2: RM-cores
IEC 60424-4:2001 Ferrite cores - Guide on the limits of surface irregularities - Part 4: Ring-cores
IEC 60424-4:2015 Ferrite cores - Guidelines on the limits of surface irregularities - Part 4: Ring-cores
IEC 60424-5:2009 Ferrite cores - Guide on the limits of surface irregularities - Part 5: Planar-cores
IEC 60424-3:1999 Ferrite cores - Guide on the limits of surface irregularities - Part 3: ETD-cores and E-cores
IEC 60424-3:2015 Ferrite cores - Guidelines on the limits of surface irregularities - Part 3: ETD-cores, EER-cores, EC-cores and E-cores

American National Standards Institute （ANSI), Surface defects

ANSI PH3.617-1980 Definitions Testing and Specifications for Appearance Imperfections of Optical Elements and Assemblies
ANSI/MSS SP-55-2011 Quality Standard for Steel Castings for Valves, Flanges, Fittings, and Other Piping Components - Visual Method for Evaluation of Surface Irregularities

Japanese Industrial Standards Committee (JISC), Surface defects

JIS B 0090-7:2021 Preparation of drawings for optical elements and systems -- Part 7: Surface imperfections
JIS B 0090-7:2001 Preparation of drawings for optical elements and systems -- Part 7: Surface imperfection tolerances
JIS B 0090-7:2012 Preparation of drawings for optical elements and systems -- Part 7: Surface imperfections
JIS B 1041:1993 Fasteners -- Surface discontinuities -- Part 1: Bolts, screws and studs for general requirements
JIS B 1043:1993 Fasteners -- Surface discontinuities -- Part 3: Bolts, screws and studs for special requirements
JIS C 2560-3-1:2006 Cores made of ferrite -- Part 3-1: Dimensions and surface irregularities -- E cores

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Surface defects

GB/T 9634.8-2018 Ferrite cores—Guideline on the limits of surface irregularities—Part 8: PQ-cores

Lithuanian Standards Office , Surface defects

LST EN ISO 8785:2006 Geometrical product specification (GPS) - Surface imperfections - Terms, definitions and parameters (ISO 8785:1998)

AENOR, Surface defects

UNE-EN ISO 8785:2000 GEOMETRICAL PRODUCT SPECIFICATION (GSP). SURFACE IMPERFECTIONS. TERMS, DEFINITIONS AND PARAMETERS (ISO 8785:1998)
UNE-EN 16492:2014 Paints and varnishes - Evaluation of the surface disfigurement caused by fungi and algae on coatings

ACI - American Concrete Institute, Surface defects

ACI 309.2R-1990 Identification and Control of Consolidation-Related Surface Defects in Formed Concrete

BE-NBN, Surface defects

IN-BIS, Surface defects

GOSTR, Surface defects

GOST ISO 10893-4-2017 Seamless and welded steel tubes. Part 4. Liquid penetrant inspection for the detection of surface imperfections

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Surface defects

PREN 3376-1989 Aerospace Series Limits of Surface Imperfections of Elastomeric Toroidal Sealing Rings (O-rings) (Issue P 1)

Standard Association of Australia （SAA）, Surface defects

AS 4544:2005 Non-destructive testing - Eddy current testing for the detection of surface flaws - Ferromagnetic and non-ferromagnetic metallic products

Aerospace, Security and Defence Industries Association of Europe (ASD), Surface defects

ASD-STAN PREN 3376-1989 Aerospace Series Limits of Surface Imperfections of Elastomeric Toroidal Sealing Rings (O-rings) (Issue P 1)

ES-UNE, Surface defects

UNE-EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019) (Endorsed by Asociación Española de Normalización in May of 2020.)

CEN - European Committee for Standardization, Surface defects

EN ISO 25178-73:2019 Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures
EN 16729-3:2018 Railway applications - Infrastructure - Non-destructive testing on rails in track - Part 3: Requirements for identifying internal and surface rail defects

Manufacturers Standardization Society of the Valve and Fitting Industry (MSS), Surface defects

MSS SP-55-2006 Quality Standard for Steel Castings for Valves, Flanges, Fittings and Other Piping Components - Visual Method for Evaluation of Surface Irregularities
MSS SP-55-2001 Quality standard for steel castings for valves, flanges, and fittings and other piping components - Visual method for examination of surface lrregularities

SG-SPRING SG, Surface defects

SS 373 Pt.7-1994 Specification for optics and optical instruments - contact lenses Part 7: Determination of inclusions and surface imperfections of rigid contact lenses