ZH
RU
ES

pe pe

pe pe, Total:57 items.

In the international standard classification, pe pe involves: Pipeline components and pipelines, Rubber and plastics products, Networking.

German Institute for Standardization, pe pe

DIN 8074:2022 Polyethylene (PE) pipes - PE 80, PE 100 - Dimensions; Text in German and English
DIN 8074:2022-03 Polyethylene (PE) pipes - PE 80, PE 100 - Dimensions; Text in German and English / Note: Date of issue 2022-02-11*Intended as replacement for DIN 8074 (2011-12).
DIN 8074:2011 Polyethylene (PE) - Pipes PE 80, PE 100 - Dimensions; Text in German and English
DIN 8074:2011-12 Polyethylene (PE) - Pipes PE 80, PE 100 - Dimensions; Text in German and English / Note: To be replaced by DIN 8074 (2022-03).
DIN 8074:2023-10 Polyethylene (PE) pipes - PE 80, PE 100 - Dimensions; Text in German and English
DIN 16972:1995 Compression moulded plates made of polyethylene high density (PE-UHMW), (PE-HMW), (PE-HD) - Technical specifications
DIN 8075:2018-08 Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing; Text in German and English
DIN 16834:2022 Polyethylene pipes of raised temperature resistance (PE-RT) - PE-RT Type I and PE-RT Type II - Dimensions; Text in German and English
DIN 16834:2009-10 Polyethylene pipes of raised temperature resistance (PE-RT) - PE-RT Type I and PE-RT Type II - Dimensions / Note: To be replaced by DIN 16834 (2022-03).
DIN 16834:2022-03 Polyethylene pipes of raised temperature resistance (PE-RT) - PE-RT Type I and PE-RT Type II - Dimensions; Text in German and English / Note: Date of issue 2022-02-04*Intended as replacement for DIN 16834 (2009-10).
DIN 8075:2011 Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing; Text in German and English
DIN 8075:2018 Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing; Text in German and English
DIN 16833:2022 Polyethylene pipes of raised temperature resistance (PE-RT) - PE-RT Type I and PE-RT Type II - General quality requirements, testing; Text in German and English
DIN 16833:2009-09 Polyethylene pipes of raised temperature resistance (PE-RT) - PE-RT Type I and PE-RT Type II - General quality requirements, testing / Note: To be replaced by DIN 16833 (2022-03).
DIN 16833:2022-03 Polyethylene pipes of raised temperature resistance (PE-RT) - PE-RT Type I and PE-RT Type II - General quality requirements, testing; Text in German and English / Note: Date of issue 2022-02-04*Intended as replacement for DIN 16833 (2009-09).
DIN 16834:2023-10 Polyethylene pipes of raised temperature resistance (PE-RT) - PE-RT Type I and PE-RT Type II - Dimensions; Text in German and English
DIN 16834:2009 Polyethylene pipes of raised temperature resistance (PE-RT) - PE-RT Type I and PE-RT Type II - Dimensions
DIN EN ISO 15527:2022-05 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2022); German version EN ISO 15527:2022
DIN 16833:2023-10 Polyethylene pipes of raised temperature resistance (PE-RT) - PE-RT Type I and PE-RT Type II - General quality requirements, testing; Text in German and English
DIN EN ISO 15527:2019 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2018)
DIN EN ISO 15527:2021 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO/DIS 15527:2021); German and English version prEN ISO 15527:2021

International Telecommunication Union (ITU), pe pe

ITU-T Q.3303.0-2007 Resource control protocol No. 3 Protocols at the Rw interface between a policy decision physical entity (PD-PE) and a policy enforcement physical entity (PE-PE): Overview Study Group 11
ITU-T Q.3303.3-2008 Resource control protocol No. 3 Protocols at the Rw interface between a policy decision physical entity (PD-PE) and a policy enforcement physical entity (PE-PE): Diameter Study Group 11
ITU-T Q.3303.1-2007 Resource control protocol No. 3 ?Protocol at the interface between a Policy Decision Physical Entity (PD-PE) and a Policy Enforcement Physical Entity (PE-PE): COPS alternative Study Group 11
ITU-T Q.3303.3-2013 Resource control protocol No. 3 – Protocols at the Rw interface between a policy decision physical entity (PD-PE) and a policy enforcement physical entity (PE-PE): Diameter profile version 3 (Study Group 11)
ITU-T Q.3303.3-2012 (Pre-Published) Resource control protocol No. 3 Protocols at the Rw interface between a policy decision physical entity (PD-PE) and a policy enforcement physical entity (PE-PE): Diameter profile version 2
ITU-T Q.3303.2-2007 Resource control protocol No. 3 Protocol at the interface between a Policy Decision Physical Entity (PD-PE) and a Policy Enforcement Physical Entity (PE-PE) (Rw interface): H.248 alternative Study Group 11
ITU-T Q.3303.2-2014 Resource control protocol No. 3 - Protocol at the interface between a policy decision physical entity (PD-PE) and a policy enforcement physical entity (PE-PE) (Rw interface): ITU-T H.248 alternative version 2
ITU-T Q.3303.1 CORR 1-2014 Resource control protocol No. 3 - Protocol at the interface between a Policy Decision Physical Entity (PD-PE) and a Policy Enforcement Physical Entity (PE-PE): COPS alternative version 2; Corrections to Annex A
ITU-T Q.3303.1-2012 Resource control protocol No. 3 – Protocol at the interface between a Policy Decision Physical Entity (PD-PE) and a Policy Enforcement Physical Entity (PE-PE): COPS alternative version 2 (Study Group 11)

American National Standards Institute （ANSI), pe pe

ANSI/ASTM F1282:2010 Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe

Danish Standards Foundation, pe pe

DS/EN ISO 15527:2013 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods

Association Francaise de Normalisation, pe pe

NF T54-426*NF EN ISO 15527:2022 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods
NF T54-426:2013 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods
NF EN ISO 15527:2022 Plastiques - Plaques moulées par compression en polyéthylène (PE-UHMW, PE-HD) - Exigences et méthodes d'essai

American Society for Testing and Materials (ASTM), pe pe

ASTM F1282-23 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
ASTM F1282-17 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
ASTM F1282-03e1 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
ASTM F1282-03 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
ASTM F1282-02e1 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
ASTM F1282-02e2 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
ASTM F1282-00 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
ASTM F1282-01 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
ASTM F1282-01a Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
ASTM F1282-10 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
ASTM F1282-23a Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
ASTM F1282-06 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe

ES-UNE, pe pe

UNE-EN ISO 15527:2022 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2022)

International Organization for Standardization (ISO), pe pe

ISO 15527:2018 Plastics — Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) — Requirements and test methods
ISO 15527:2022 Plastics — Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) — Requirements and test methods
ISO 15527:2007 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods
ISO 15527:2010 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods

British Standards Institution (BSI), pe pe

BS EN ISO 15527:2022 Plastics. Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD). Requirements and test methods
21/30429475 DC BS EN ISO 15527. Plastics. Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD). Requirements and test methods

AENOR, pe pe

UNE-EN ISO 15527:2014 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2010)

AT-ON, pe pe

OENORM EN ISO 15527:2021 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO/DIS 15527:2021)

European Committee for Standardization (CEN), pe pe

FprEN ISO 15527:2021 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO/FDIS 15527:2021)