ZH
RU
ES

pe a

pe a, Total:140 items.

In the international standard classification, pe a involves: Electronic component assemblies, Fluid storage devices, Burners. Boilers, Rubber and plastics products, Surface treatment and coating, Paints and varnishes, Welding, brazing and soldering.

IPC - Association Connecting Electronics Industries, pe a

IPC PE-74- Trouble Shooting Guide for Printed Board Manufacture and Assembly
IPC PE-74 SECTION 2- Documentation
IPC PE-74 SECTION 17- Component Preparation and Assembly
IPC PE-74 SECTION 1- General Introduction
IPC PE-740A CD-1997 Troubleshooting for Printed Board Manufacture and Assembly
IPC PE-74 SECTION 3- Photo Tooling
IPC PE-74 SECTION 4- Raw Materials
IPC PE-74 SECTION 10- Electroplating
IPC PE-74 SECTION 7- Plated-Through Hole
IPC PE-74 SECTION 9- Imaging
IPC PE-74 SECTION 13- Lamination
IPC PE-74 SECTION 15- Metallic Protective Coatings
IPC PE-74 SECTION 6- Hole Preparation
IPC PE-74 SECTION 18- Inspection and Test
IPC PE-74 SECTION 12- Innerlayer Fabrication
IPC PE-74 SECTION 5- Mechanical Operations
IPC PE-74 SECTION 14- Process Specifics
IPC PE-74 SECTION 11- Etching
IPC PE-74 SECTION 8- Cleaning Procedures
IPC PE-74 SECTION 16- Nonmetallic Protective Coatings

National Electrical Manufacturers Association（NEMA), pe a

NEMA PE 1-2003 Uninterruptible Power Systems (UPS) - Specification and Performance Verification
NEMA PE 7-1997 Communication Type Battery Chargers
NEMA PE 5-1997 Utility Type Battery Chargers
NEMA PE 5-1996 Utility Type Battery Chargers R(2003)

Institute of Interconnecting and Packaging Electronic Circuits (IPC), pe a

IPC PE-740A-1997 Troubleshooting for Printed Board Manufacture and Assembly Revision A
IPC PE-740A INTRO-1997 Troubleshooting for Printed Board Manufacture and Assembly
IPC PE-740A SECTION 1-1997 General Introduction
IPC PE-740A SECTION 2-1997 Design and Documentation
IPC PE-740A SECTION 3-1997 Phototooling
IPC PE-740A SECTION 4-1997 Base Materials
IPC PE-740A SECTION 5-1997 Mechanical Operations
IPC PE-740A SECTION 6-1997 Hole Preparation
IPC PE-740A SECTION 7-1997 Electroless Processes
IPC PE-740A SECTION 8-1997 Cleaning Procedures
IPC PE-740A SECTION 9-1997 Imaging
IPC PE-740A SECTION 10-1997 Electroplating
IPC PE-740A SECTION 11-1997 Etching
IPC PE-740A SECTION 12-1997 Innerlayer Fabrication
IPC PE-740A SECTION 13-1997 Lamination
IPC PE-740A SECTION 14-1997 Metallic Protective Coatings
IPC PE-740A SECTION 15-1997 Non-Metallic Coatings
IPC PE-740A SECTION 16-1997 Component Mounting
IPC PE-740A SECTION 17-1997 Soldering
IPC PE-740A SECTION 18-1997 Cleaning of Printed Board Assemblies
IPC PE-740A SECTION 19-1997 Post Soldering Processes
IPC PE-740A SECTION 20-1997 Inspection and Test
IPC PE-740A SECTION 21-1997 Modification, Rework and Repair

Standard Association of Australia （SAA）, pe a

RUL PE.11-2001 Rulings to pressure equipment Standards - Ruling 11: Advanced design vessels - Design strength valves (Ruling to AS 1210 Supplement 1-1990)
RUL PE.4-2002 Rulings to pressure equipment Standards - Ruling 4: Pressure containers for paint (Ruling to AS 1210)
RUL PE.9-2002 Rulings to pressure equipment Standards - Ruling 9: Design of pressure equipment using steel having bilateral thickness tolerances (Ruling to AS 1210 and AS 1548)
RUL PE.3-2002 Rulings to pressure equipment Standards - Ruling 3: Internally fitted doors for beer tanks (Ruling to AS 1210)
RUL PE.13-2004 Rulings to pressure equipment Standards - Ruling 13: Specified minimum tensile strength of steel for buried and mounded storage vessels (AS 1210-1997)
RUL PE.8-2002 Rulings to pressure equipment Standards - Ruling 8: Seamless copper pipe joined by brazing (Ruling to AS 4041)
RUL PE.12-2004 Rulings to pressure equipment Standards - Ruling 12: Minimum nominal thickness of pressure parts (AS 1210-1997)
RUL PE.1-2002 Rulings to pressure equipment Standards - Ruling 1: Retention of backing strips in logitudinal joints in refrigeration vessels (Ruling to AS 1210)
RUL PE.10-2001 Rulings to pressure equipment Standards - Ruling 10: Advanced design vessels - Use of joggled joints (Ruling to AS 1210 Supplement 1-1990)
RUL PE.5-2002 Rulings to pressure equipment Standards - Ruling 5: Sugar processing vacuum pans and evaporators - Tubeplate design and tube fixing (Ruling to AS 1210)
RUL PE.7-2002 Rulings to pressure equipment Standards - Ruling 7: Small safety valves (Ruling to AS 1271)
RUL PE.0-2002 Rulings to pressure equipment Standards - Part 0: Introduction and list of rulings
RUL PE.2-2002 Rulings to pressure equipment Standards - Ruling 2: Nonconforming longitudinal joints in refrigeration vessels (Ruling to AS 1210)
RUL PE.6-2002 Rulings to pressure equipment Standards - Ruling 6: Fusion-welded chlorine transport drums (Ruling to AS 1210)

NEMA - National Electrical Manufacturers Association, pe a

NEMA PE 1-2012 Uninterruptible Power Systems (UPS) — Specification and Performance Verification
NEMA PE 1-1992 Uninterruptible Power Systems
NEMA PE 5-1985 Utility Type Battery Chargers
NEMA PE 7-1996 Communication Type Battery Chargers
NEMA PE 7-1985 Communication Type Battery Chargers
NEMA PE 1-1983 UNINTERRUPTIBLE POWER SYSTEMS (RESCINDED)
NEMA PE 7-2018 Communications Type Battery Chargers

GM North America, pe a

GMP.PE.003-2011 Polyethylene ?High Density, Extrusion Grade, Copolymer Issue 3; Do Not Use on New Programs; Replaced by GMW16426 ?GMW16426P-PE-T2
GMP.PE.004-2011 Polyethylene ?High Density, Copolymer, Blow Molding/Extrusion Grade, Pellet Form Issue 2; Do Not Use on New Programs; Replaced by GMW16426 ?GMW16426P-PE-T2
GMP.PE.060-2011 Polyethylene ?High Density, Stress Crack Resistant, Blow Molding Issue 3; Do Not Use on New Programs; Replaced by GMW16426 - GMW16426P-PE-T1
GM GMP.PE.006-1988 Polyethylene - High Density, Copolymer, Injection Molding Grade, Pellet Form
GM GMP.PE.008-1998 Polyethylene - High Density, Copolymer, Injection Molding (Revision B)
GM GMP.PE.011-2003 Polyethylene-High Density, Homopolymer
GM GMP.PE.012-1997 Polyethylene - Low Density, UV Stabilized, Blow Molding Grade (Revision B)
GM GMP.PE.014-2001 Polyethylene - High Density, Stress Crack Resistant, Injection Molding Grade (Revision A)
GM GMP.PE.015-1994 Polyethylene - Linear Low Density, Low Gloss, Blow Molding Grade
GM GMP.PE.051-1998 Polyethylene - Ultra High Molecular Weight, Ram Extrusion/Compression Molded Grade
GM GMP.PE.059-1990 Polyethylene - Medium Density Polyethylene
GM GMP.PE.064-1998 Polyethylene Low Density, Extrusion Grade
GM GMP.PE.003-2011 Polyethylene - High Density, Extrusion Grade, Copolymer (Issue 3; Do Not Use on New Programs; Replaced by GMW16426 - GMW16426P-PE-T2)
GM GMP.PE.004-2011 Polyethylene - High Density, Copolymer, Blow Molding/Extrusion Grade, Pellet Form (Issue 2; Do Not Use on New Programs; Replaced by GMW16426 - GMW16426P-PE-T2)
GM GMP.PE.007-2011 Polyethylene - High Density, Copolymer, Sheet Extrusion/Thermoforming, Pellet Form (Issue 5; Do Not Use on New Programs; Replaced by GMW16)
GM GMP.PE.017-2011 Polyethylene - 25% Filled, High Density, Sheet Extrudable, Blow Moldable, Homopolymer (Issue 3; Do Not Use on New Programs; No Replacement)
GM GMP.PE.020-2011 Polyethylene - High Density, 30% Mica Filled, Blow Moldable, ASTM Tests (Issue 2; Do Not Use on New Programs; No Replacement)
GM GMP.PE.060-2011 Polyethylene - High Density, Stress Crack Resistant, Blow Molding (Issue 3; Do Not Use on New Programs; Replaced by GMW16426 - GMW16426P-PE-T1)
GM GMP.PE.002-1988 Polyethylene - High Density, 25% Mica Filled, Chemically Coupled, Blow Moldable,Homopolymer
GM GMP.PE.003-2001 Polyethylene - High Density, Extrusion Grade, Copolymer
GM GMP.PE.004-1988 Polyethylene - High Density, Copolymer, Blow Molding/Extrusion Grade, Pellet Form
GM GMP.PE.005-1988 Polyethylene - High Density, Copolymer, Injection Molding Grade, Pellet Form
GM GMP.PE.007-1996 Polyethylene - High Density, Copolymer, Sheet Extrusion/ Thermoforming, Pellet Form
GM GMP.PE.009-1991 Polyethylene - High Density
GM GMP.PE.010-1989 Polyethylene - High Density, 20% Mica Filled, Chemically Coupled, Blow Moldable Homopolymer
GM GMP.PE.013-1991 Polyethylene - Medium Density, UV Stabilized, Blow Molding Grade
GM GMP.PE.017-2003 Polyethylene 25% Filled, High Density, Sheet Extrudable, Blow Moldable, Homopolymer
GM GMP.PE.018-1998 Polyethylene - 20% Glass Filled, Chemically Coupled, High Density, Injection Molding Grade
GM GMP.PE.019-2003 Polyethylene High Density, 10% Mica Filled, Blow Moldable, ASTM Tests Also known as GMN3402 (see paragraph 7)
GM GMP.PE.020-2003 Polyethylene High Density, 30% Mica Filled, Blow Moldable, ASTM Tests Also known as GMN3405 (see paragraph 7)
GM GMP.PE.021-2003 Polyethylene (PE) High Density, Conductive, Blow Moldable, ASTM Tests
GM GMP.PE.050-1991 Polyethylene - High Density, High Molecular Weight
GM GMP.PE.052-1990 Polyethylene - Low Density, Homopolymer, Extrusion Grade
GM GMP.PE.053-1990 Polyethylene - Low Density, Homopolymer, Injection Molding Grade
GM GMP.PE.054-1995 Polyethylene - Blow Molding Color Concentrate
GM GMP.PE.056-1995 Polyethylene Foam: Cross - Linked, Black
GM GMP.PE.058-1998 Polyethylene - Medium Density, UV Stable, Injection Molding Grade
GM GMP.PE.060-1992 Polyethylene - High Density, Stress Crack Resistant, Blow Molding
GM GMP.PE.061-1990 Polyethylene - High Density, HMW, Blow Molding, Copolymer
GM GMP.PE.062-2001 Polyethylene - High Density, High Molecular Weight
GM GMP.PE.063-1991 Polyethylene - Low Density, Homopolymer, Inj. Molded, UV Stable
GM GMP.PE.065-2001 Polyethylene Based Adhesive

General Motors do Brasil, pe a

GMSA EMS.PE.0588-2011 vinyl film knitted support (microperforated) Pl谩stico para estofamento (microperfurado) Do Not use on New Programs; No Replacement
GMSA LTP .PE.118-2011 Procedure for determining blocking characteristics of vinyl and trim materials Determina莽茫o da caracter铆stica de colamento de superf铆cie de pl谩sticos laminados e materiais similares Do Not use on New Programs; No Replacement
GMSA LTP.PE.021-2011 Determination of fogging characteristics of trim materials Deterrmina莽茫o de caracter铆sticas de 鈥渇ogging鈥?de materiais de acabamento Do Not use on New Programs; No Replacement
GMSA EMS.PE.0061-2011 Free blown polyurethane foam-polyether basis Espuma de poliuretano a base de poli茅ter de crescimento livre Do Not use on New Programs; No Replacement
GMSA LTP.PE.120-2011 Test method for determining topcoat adhesion of vinyl trim materials Determina莽茫o da ades茫o da camada de acabamento de material visin铆licos Do Not use on New Programs; No Replacement
GMSA EMS.PE.806-2011 Vinyl for trimming parts Pl谩stico para pe莽as de acabamento Do Not use on New Programs; No Replacement
GMSA EMS.PE.0033-2011 Polyamide 6.6 thread Linha de poliamida 6.6 Do Not use on New Programs; No Replacement
GMSA EMS.PE.0581-2011 Polyamide 6.6 thread Linha de poliamida 6.6 Do Not use on New Programs; No Replacement
GMSA LTP.PE.105-2011 Procedure for determining the seam strength of upholstery trim materials Determina莽茫o da resist锚ncia de costura de materiais de acabamento Do Not use on New Programs; No Replacement
GMSA LTP.PE.107-2011 Procedure for determining softness of trim materials Determina莽茫o da maciez de materiais de acabamento Do Not use on New Programs; No Replacement
GMSA LTP.PE.111-2011 Procedure for determining the resistance to thread tear-out of trim materials Determina莽茫o da resist锚ncia do ponto de costura de materiais de acabamento Do Not use on New Programs; No Replacement
GMSA LTP.PE.116-2011 Procedure for determining the volatility (weight loss) of trim materials Determina莽茫o da volatilidade (perda de peso) de materiadise acabamento Do Not use on New Programs; No Replacement
GMSA LTP.PE.103-2011 Procedure for determining colorfastness to rubbing of textiles and coated plastics Determina莽茫o de transfer锚cia de car por atrito de materiais t锚xteis e pl谩sticos Do Not use on New Programs; No Replacement
GMSA LTP.PE.104-2011 Procedure for determining the adhesion between components of coupled materials Determina莽茫o da ades茫o entre camadas de materiais acoplados Do Not use on New Programs; No Replacement
GMSA LTP.PE.108-2011 Procedure for determining the resistance to" spotting" of trim materials by water and saline solution Determina莽茫o da resist锚ncia ao gotejamento de 谩gua e de solu莽茫o salina em materiais de acabamento Do Not use on New Programs; No Replacement
GMSA LTP.PE.113-2011 Procedure for determining the humiditrye sistance of textilesand trim materials Determina莽茫o da resist锚ncia 脿 umidade de materiais t锚xteis e de acabamento Do Not use on New Programs; No Replacement
GMSA LTP .PE.114-2011 Procedure for determining the heat resistance of textiles and trim materials Determina莽茫o da resist锚ncia 脿 temperatura de materiais t锚xteis e de acabamento Do Not use on New Programs; No Replacement
GMSA LTP.PE.115-2011 Procedure for determining the dye stability of textile materials Determina莽茫o da estabilidade de tingimento de materiais t锚xteis Do Not use on New Programs; No Replacement
GMSA LTP.PE.117-2011 Procedure for determining the pliability of textiles and coated plastics Determina莽茫o da maciez de materiais t锚xteis e pl谩sticos laminados Do Not use on New Programs; No Replacement
GMSA LTP.PE.119-2011 Procedure for determining the staining of trim materials due to sulfur dioxide (SO,) and hydrogen sulfide (H2S) Determina莽茫o da resist锚ncia ao manchamento de materiais de acabamento por di贸xido de enxofre (SO,) e por g谩s sulf铆drico (H2S) Do Not use
GMSA LTP.PE.121-2011 Test method for determining crazing of vinyl trim materials Determina莽茫o da resist锚ncia ao dobramento de materiais vin铆licos Do Not use on New Programs; No Replacement
GMSA LTP.PE.122-2011 Procedure for determining the loss of grain of interior trim materials Determina莽茫o da perda de grava莽茫o de materiais de acabamento Do Not use on New Programs; No Replacement
GMSA LTP.PE.126-2011 Determining tensile properties of textiles, vinyls and trim materials Determina莽茫o das propriedades de tens盲o de materiais texteis, vinilicos e similares Do Not use on New Programs; No Replacement
GMSA LTP.PE.109-2011 Identification of fibers in textiles Identifica莽茫o de fibras de materiais t锚xteis Do Not use on New Programs; No Replacement
GMSA LTP .PE.110-2011 Test method for determining the weight per unit area of the backing of PVC 鈥?coated Determina莽茫o do peso por unidade de 谩rea da base de materiais vin铆licos Do Not use on New Programs; No Replacement
GMSA EMS.PE.1515-2011 Cavity bag Bolsa infl谩vel Do Not use on New Programs; No Replacement
GMSA EMS.PE.0018-2011 Laminated plastic sheet 鈥?PVC Laminado de PVC Do Not use on New Programs; No Replacement

未注明发布机构, pe a

RO-ASRO, pe a

STAS 2598/1-1979 Emulsible oils for metal workiiig OIL PE 1 TYPE A