ZH
RU
ES

Selectivity in method validation

Selectivity in method validation, Total:212 items.

In the international standard classification, Selectivity in method validation involves: Electricity. Magnetism. Electrical and magnetic measurements, Biology. Botany. Zoology, General methods of tests and analysis for food products, Sterilization and disinfection, Water quality, Milk and milk products, Air quality, Construction materials, Protection against fire, Surface treatment and coating, Metrology and measurement in general, Fuels, Inorganic chemicals, Test conditions and procedures in general, Ceramics, Analytical chemistry, Domestic electrical appliances in general, Electronic component assemblies, Internal combustion engines, Quality, Electronic components in general, Medical equipment, Wastes, Nuclear energy engineering, Safety of machinery, Rubber, Furniture, Linear and angular measurements, Optics and optical measurements, Laboratory medicine, Adhesives, Iron and steel products, Microbiology, Non-ferrous metals, Measurement of volume, mass, density, viscosity, Soil quality. Pedology, Products of the textile industry, Fluid storage devices, Paints and varnishes.

CU-NC, Selectivity in method validation

NC 90-19-17-1987 Metrological Assurance. Low Frecuency Selective Microvoltrneters. Methods and Means of Verification

RU-GOST R, Selectivity in method validation

GOST 8.119-1985 State system for ensuring the uniformity of measurements. Selective electron voltmeters. Methods of verification
GOST R 8.683-2009 State system for ensuring the uniformity of measurements. Selective electronic voltmeters. Verification methods
GOST R 8.704-2010 State system for ensuring the uniformity of measurements. Working dilatometers. Verification procedure
GOST R 8.671-2009 State system for ensuring the uniformity of measurements. In process gauges of linear parameters. Verification methods
GOST R 8.730-2010 State system for ensuring the uniformity of measurements. Interference refractometers for gas analysis. Verification procedure
GOST R 55492-2013 Electronics assembly technology. Part 3. Selection guidance of environmental and endurance test methods for solder joints
GOST R ISO/TR 8550-2-2008 Statistical methods. Guide to the selection and usage of acceptance sampling systems of discrete items in lots. Part 2. Sampling by attributes
GOST 8.634-2013 State system for ensuring the uniformity of measurements. Gas-analytical interferencial.Verification procedure
GOST 8.442-1981 State system for ensuring the uniformity of measurements. Moisture meters neutron. Methods and means of verification
GOST 8.624-2013 State system for ensuring the traceability of measurements. Laboratory water in crude oil analyzers. Verification method
GOST R 8.616-2006 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring the ultrasound power in water within the frequency range from 0,5 to 12 MHz
GOST R 8.803-2012 State system for ensuring the uniformity of measurements. State verification schedule for means measuring absorbed dose rate and dose equivalent rate of neutron radiation

Canadian General Standards Board （CGSB), Selectivity in method validation

CGSB 4.2 NO. 27-98-CAN/CGSB-1998 Methodes Pour Epreuves Textiles Comportement Au Feu - Selection Des Methodes
CGSB 1-GP-71 METH 143.1-1980 Methods of Testing Paints and Pigments Long-Term Outdoor Performance Selection, Exposure and Examination of Panels

British Standards Institution (BSI), Selectivity in method validation

BS ISO 24190:2023 Biotechnology. Analytical methods. Risk-based approach for method selection and validation for rapid microbial detection in bioprocesses
BS EN ISO 20813:2022 Foodstuffs. Principles of selection and criteria of validation for varietal identification methods using specific nucleic acid
BS EN 1093-1:1999 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Selection of test methods
BS PD CEN ISO/TS 23758:2021 Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products
BS DD CEN/TS 14425-1:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Guide to test method selection
DD CEN/TS 14425-1:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Guide to test method selection
PD ISO/TS 16688:2017 Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications
BS EN 62137-3:2012 Electronics assembly technology. Selection guidance of environmental and endurance test methods for solder joints
BS EN 13238:2001 Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
PD ISO/TR 16203:2016 Corrosion of metals and alloys. Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
BS ISO 26842-2:2013 Adhesives. Test methods for the evaluation and selection of adhesives for indoor wood products. Resistance to delamination in severe environments
PD CEN ISO/TS 23758:2021 Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products
BS ISO 26842-2:2020 Adhesives. Test methods for the evaluation and selection of adhesives for indoor wood products - Resistance to delamination in severe environments
PD ISO/TS 27878:2023 Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies
BS EN ISO 22032:2007 Water quality. Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge. Method using extraction and gas chromatography/mass spectrometry
BS ISO 26842-1:2020 Adhesives. Test methods for the evaluation and selection of adhesives for indoor wood products - Resistance to delamination in non-severe environments
BS EN ISO 11114-4:2007 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Test methods for selecting metallic materials resistant to hydrogen embrittlement
BS EN ISO 11114-4:2017 Tracked Changes. Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Test methods for selecting steels resistant to hydrogen embrittlement

Association Francaise de Normalisation, Selectivity in method validation

NF EN 14575:2005 Géomembranes - Méthode d'essai sélective pour la détermination de la résistance à l'oxydation
NF V03-045*NF ISO 13495:2014 Foodstuffs - Principles of selection and criteria of validation for the varietal identification methods using specific nucleic acid
NF EN 12447:2021 Géotextiles et produits apparentés - Méthode d'essai sélective pour la détermination de la résistance à l'hydrolyse dans l'eau
XP V04-551*XP CEN ISO/TS 23758:2021 Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products
NF ISO 13495:2014 Produits alimentaires - Principes de sélection et critères de validation des méthodes d'identification variétale par analyses d'acides nucléiques spécifiques
NF G07-180:1985 Textiles - Fire Behaviour - Data for choosing standardized methods of test to be used
XP X31-131:2020 Test methods for the environmental characterization of solid matrices - Characterization of analytical methods - Guide for the validation of physico-chemical analytical methods in soil, sediment and sludge matrices and for the selection of test samples
NF E09-081-1*NF EN 1093-1:2009 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1 : selection of test methods
NF EN ISO 12960:2020 Géotextiles et produits apparentés - Méthodes d'essai sélectives pour la détermination de la résistance aux liquides acides et alcalins
NF T46-038:1995 Rubber vulcanized of thermoplastic. Resistance to ozone cracking. Reference and alternative methods for determining ozone concentration in laboratory test chambers.
NF EN 14414:2004 Géosynthétiques - Méthode d'essai sélective permettant de déterminer la résistance chimique pour l'utilisation dans les centres de stockage de déchets
FD A05-013*FD ISO/TR 16203:2016 Corrosion of metals and alloys - Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
NF ISO 26842-1:2020 Adhésifs - Méthodes d'essai pour la sélection et l'évaluation des adhésifs destinés aux produits en bois utilisés à l'intérieur - Partie 1 : résistance à la délamination dans des environnements non sévères
XP CEN ISO/TS 23758:2021 Lignes directrices pour la validation des méthodes qualitatives de dépistage des résidus de médicaments vétérinaires dans le lait et les produits laitiers
NF EN 300338-3:2020 Caractéristiques techniques et méthodes de mesure pour les équipements destinés à la génération, l'émission et la réception d'Appels Sélectifs Numériques (ASN) dans le service mobile maritime en ondes hectométriques, en ondes hectométriq...
NF EN 300338-5:2020 Caractéristiques techniques et méthodes de mesure pour les équipements destinés à la génération, l'émission et la réception d'Appels Sélectifs Numériques (ASN) dans le service mobile maritime en ondes hectométriques, en ondes hectométriq...
NF EN 300338-6:2020 Caractéristiques techniques et méthodes de mesure pour les équipements destinés à la génération, l'émission et la réception d'Appels Sélectifs Numériques (ASN) dans le service mobile maritime en ondes hectométriques, en ondes hectométriq...
NF EN 300338-2:2020 Caractéristiques techniques et méthodes de mesure pour les équipements destinés à la génération, l'émission et la réception d'Appels Sélectifs Numériques (ASN) dans le service mobile maritime en ondes hectométriques, en ondes hectométriq...
NF EN 300338-7:2022 Caractéristiques techniques et méthodes de mesure pour les équipements destinés à la génération, l'émission et la réception d'Appels Sélectifs Numériques (ASN) dans le service mobile maritime en ondes hectométriques, en ondes hectométriq...
NF EN 300338-8:2022 Caractéristiques techniques et méthodes de mesure pour les équipements destinés à la génération, la transmission et la réception d'Appels Sélectifs Numériques (ASN) dans le service maritime mobile en ondes hectométriques, en ondes hectomét...
NF EN 300338-4:2017 Caractéristiques techniques et méthodes de mesure pour les équipements destinés à la génération, la transmission et la réception d'Appels Sélectifs Numériques (ASN) dans le service maritime mobile en ondes hectométriques, en ondes hectomét...
NF EN 300338-1:2021 Caractéristiques techniques et méthodes de mesure pour les équipements destinés à la génération, la transmission et la réception d'Appels Sélectifs Numériques (ASN) dans le service maritime mobile en ondes hectométriques, en ondes hectomét...
NF T76-340-2*NF ISO 26842-2:2020 Adhesives - Test methods for the evaluation and selection of adhesives for indoor wood products - Part 2 : resistance to delamination in severe environments
NF ISO 26842-2:2020 Adhésifs - Méthodes d'essai pour la sélection et l'évaluation des adhésifs destinés aux produits en bois utilisés à l'intérieur - Partie 2 : résistance à la délamination dans des environnements sévères
NF E29-648-4*NF EN ISO 11114-4:2017 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4 : Test methods for selecting steels resistant to hydrogen embrittlement
NF T76-340-1*NF ISO 26842-1:2020 Adhesives - Test methods for the evaluation and selection of adhesives for indoor wood products - Part 1 : resistance to delamination in non-severe environments
NF E29-648-4:2006 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4 : test methods for selecting metallic materials resistant to hydrogen embrittlement.
NF EN ISO 11114-4:2017 Bouteilles à gaz transportables - Compatibilité des matériaux et des robinets avec les contenus gazeux - Partie 4 : Méthodes d'essai pour le choix de matériaux métalliques résistants à la fragilisation par l'hydrogène
NF T76-340-2:2009 Adhesives - Test methods for the evaluation and selection of adhesives for indoor wood products - Part 2 : resistance to delamination in severe environments.

International Organization for Standardization (ISO), Selectivity in method validation

ISO 24190:2023 Biotechnology — Analytical methods — Risk-based approach for method selection and validation for rapid microbial detection in bioprocesses
ISO/FDIS 24190 Biotechnology — Analytical methods — Risk-based approach for method selection and validation for rapid microbial detection in bioprocesses
ISO/TS 23758:2021 Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products
ISO/TS 16688:2017 Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications
ISO/TR 9966:1989 Implants for surgery — Biocompatibility — Selection of biological test methods for materials and devices
ISO 2605-3:1985 Steel products for pressure purposes; Derivation and verification of elevated temperature properties; Part 3 : An alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limited
ISO/TS 23758:2021 | IDF/RM 251 Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products
ISO/TS 23758:2021 | IDF/RM 251:2021 Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products
ISO 9283:1990/Amd 1:1991 Manipulating industrial robots; performance criteria and related test methods; amendment 1: guide for selection of performance criteria for typical applications
ISO/TS 27878:2023 Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies
ISO 26842-1:2013 Adhesives - Test methods for the evaluation and selection of adhesives for indoor wood products - Part 1: Resistance to delamination in non-severe environments
ISO 11114-4:2017 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement
ISO 16140-2:2016/DAmd 1:2023 Microbiology of the food chain — Method validation — Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method — Amendment 1: Revision of qualitative MCS data evaluation, RLOD calculations in the ILS, cal...
ISO/TR 5601:2023 Paints and varnishes — Determination of volatile organic compound (VOC) and/or semi-volatile organic compound (SVOC) content — Best practices for the selection of test methods
ISO 11114-4:2005 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement

European Committee for Standardization (CEN), Selectivity in method validation

EN ISO/TS 13004:2014 Sterilization of health care products - Radiation - Substantiation of selected sterilization dose: Method VDmaxSD
CEN ISO/TS 23758:2021 Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products (ISO/TS 23758:2021)
PD CEN/TS 14425-1:2003 Advanced technical ceramics Test methods for determination of fracture toughness of monolithic ceramics Part 1:Guide to test method selection
EN 1093-1:1998 Safety of Machinery - Evaluation of the Emission of Airborne Hazardous Substances - Part 1: Selection of Test Methods
EN ISO 11114-4:2017 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement

Indonesia Standards, Selectivity in method validation

SNI 06-6876-2002 Test methods of ammonia content in water by ion selective electrode

Danish Standards Foundation, Selectivity in method validation

DS/ISO/TS 23758:2021 Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products
DS/CEN ISO/TS 23758:2021 Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products (ISO/TS 23758:2021)
DS/CEN/TS 14425-1:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 1: Guide to test method selection
DS/EN 1093-1:2009 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods
DS/EN 62137-3:2012 Electronics assembly technology - Part 3: Selection guidance of environmental and endurance test methods for solder joints
DS/EN ISO 17402:2011 Soil quality - Requirements and guidance for the selection and application of methods for the assessment of bioavailability of contaminants in soil and soil materials

IT-UNI, Selectivity in method validation

UNI CEN ISO/TS 23758:2021 Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products

American Society for Testing and Materials (ASTM), Selectivity in method validation

ASTM D6434-12(2018) Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes
ASTM D6434-12 Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes
ASTM D4043-96(2004) Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques
ASTM D4043-96e1 Standard Guide for Selection of Aquifer-Test Method in Determining of Hydraulic Properties by Well Techniques
ASTM D4043-96(2010)e1 Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques
ASTM D6434-99 Standard Guide for the Selection of Test Methods for Flexible Polypropylene (fPP) Geomembranes
ASTM D6434-04 Standard Guide for the Selection of Test Methods for Flexible Polypropylene (fPP) Geomembranes
ASTM D7011-10 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection
ASTM D4208-02(2007) Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
ASTM D4208-88(2002) Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
ASTM D4208-02 Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
ASTM D5623-94(2004)e1 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
ASTM D7011-04 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection
ASTM D6345-98 Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air
ASTM D6345-98(2004)e1 Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air
ASTM D5819-99 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM D5819-21 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM D5819-18 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM D5819-22 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM D5819-05(2016) Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM D5623-94(2009) Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
ASTM D5154-91 Standard Test Method for Determining the Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D4208-18 Standard Test Method for Total Chlorine in Coal by the Oxygen Vessel Combustion/Ion Selective Electrode Method
ASTM D4208-88(1997) Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
ASTM D4208-02e1 Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
ASTM D4208-13 Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
ASTM D4208-19 Standard Test Method for Total Chlorine in Coal by the Oxygen Vessel Combustion/Ion Selective Electrode Method
ASTM D5599-17 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
ASTM D5599-18 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
ASTM D5599-22 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
ASTM D5154-10 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D5819-05(2012) Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM D3761-96 Standard Test Method for Total Fluorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
ASTM D3761-96(2002) Standard Test Method for Total Fluorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
ASTM D3761-10 Standard Test Method for Total Fluorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
ASTM F2277-03 Standard Test Methods for Evaluating Design and Performance Characteristics of Selectorized Strength Equipment
ASTM D5599-15 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
ASTM D5819-05 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
ASTM D5154-03 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D5154-05 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D4765-13(2018) Standard Test Method for Measurement of Fluorides in Workplace Atmospheres by Ion-Selective Electrodes
ASTM D4765-13 Standard Test Method for Measurement of Fluorides in Workplace Atmospheres by Ion-Selective Electrodes
ASTM D4978-95 Standard Test Methods for Screening of Reactive Sulfides in Waste
ASTM D4978-95(2001) Standard Test Methods for Screening of Reactive Sulfides in Waste
ASTM D4978-16 Standard Test Methods for Screening of Reactive Sulfides in Waste
ASTM D7011-15 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection
ASTM D7011-15(2019) Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection
ASTM D8509/D8509M-23 Standard Guide for Test Method Selection and Test Specimen Design for Bolted Joint Related Properties
ASTM D6345-98(2003) Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air
ASTM D7011-10a Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection
ASTM D5154/D5154M-18 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM F1870-05 Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities
ASTM F1870-11 Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities
ASTM F1870-22 Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities
ASTM D4978-95(2007) Standard Test Methods for Screening of Reactive Sulfides in Waste
ASTM F1870-99 Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities
ASTM F1870-16 Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities
ASTM D6345-10 Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air
ASTM D5623-94(1999)e1 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
ASTM D5623-94(2014) Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
ASTM D5987-96(2002) Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods
ASTM D5987-96 Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods
ASTM D5987-96(2007) Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods
ASTM D5623-19 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
ASTM F1277-02(2009) Standard Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials by Ion-Selective Electrode Technique
ASTM D8141-17 Standard Guide for Selecting Volatile Organic Compounds (VOCs) and Semi-Volatile Organic Compounds (SVOCs) Emission Testing Methods to Determine Emission Parameters for Modeling of Indoor Environments
ASTM D5987-96(2015) Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods
ASTM D6196-03 Standard Practice for Selection of Sorbents, Sampling, and Thermal Desorption Analysis Procedures for Volatile Organic Compounds in Air
ASTM D6196-03(2009) Standard Practice for Selection of Sorbents, Sampling, and Thermal Desorption Analysis Procedures for Volatile Organic Compounds in Air
ASTM E2471-05(2016) Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity In Carpets
ASTM E2471-05 Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity In Carpets
ASTM E2471-05(2011)e1 Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity In Carpets

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Selectivity in method validation

GB 14103-1993 Halon fire extinguishing systems performance reguirements and test methods for selector valves
GB/T 21057-2007 Inorganic chemicals for industrial use- General method for determination of fluorine content- Ion selective electrode method
GB/T 12690.16-2010 Chemical analysis methods of non-rare earth impurities in rare earth metals and the oxides—Part 16:Determination of fluorine content—Ion selective electrode analysis

Group Standards of the People's Republic of China, Selectivity in method validation

T/QGCML 312-2022 A technical method for selectively extracting salt from high-salt organic wastewater
T/CAQI 253-2022 Selected purification technology for drinking water treatment units requirements and test methods
T/CICEIA /CAMS4-2020 Diesel engine - Test method of ammonia uniformity for SCR converter

AT-ON, Selectivity in method validation

ONR CEN ISO/TS 23758:2021 Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products (ISO/DTS 23758:2021)
ONORM ENV 1006-1993 Advanced technical ceramics - Methods of testing monolithic ceramics - Guidance on the sampling and selection of test pieces

Korean Agency for Technology and Standards (KATS), Selectivity in method validation

KS F 2587-2010(2020) Standard test method for chloride ion in fresh concrete using a chloride ion-selective electrode method
KS C IEC 62137-3-2012(2017) Electronics assembly technology－Selection guidance of environmental and endurance test methods for solder joints
KS C IEC 62137-3-2012(2022) Electronics assembly technology－Selection guidance of environmental and endurance test methods for solder joints
KS C IEC 62137-3:2012 Electronics assembly technology－Selection guidance of environmental and endurance test methods for solder joints
KS A ISO/IEC GUIDE 43-2:2002 Proficiency testing by interlaboratory comparisons-Part 2:Selection and use of proficiency testing schemes by laboratory accreditation bodies
KS A ISO/IEC GUIDE 43-2:2013 Proficiency testing by interlaboratory comparisons－Part 2：Selection and use of proficiency testing schemes by laboratory accreditation bodies
KS M ISO 26842-1-2014(2019) Adhesives — Test methods for the evaluation and selection of adhesives for indoor wood products — Part 1: Resistance to delaminaion in non-severe environments
KS D ISO 2605-3:2004 Steel products for pressure purposes Derivation and verification of elevated temperature properties Part 3 An alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limited
KS D ISO 2605-3:2013 Steel products for pressure purposes Derivation and verification of elevated temperature properties Part 3 An alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limited
KS K 0936-2022 Geotextiles and geotextile-related products — Screening test method for determining the resistance to hydrolysis in water

Taiwan Provincial Standard of the People's Republic of China, Selectivity in method validation

CNS 14627-2002 Method of test for determination of oxygenates in gasoline by gas chromatography and oxygen selective flame ionization detection

German Institute for Standardization, Selectivity in method validation

DIN V 55394-2:2000 Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies (ISO/IEC Guide 43-2:1997)
DIN CEN/TS 14425-1:2003-11 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 1: Guide to test method selection; German version CEN/TS 14425-1:2003
DIN CEN/TS 14425-1:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 1: Guide to test method selection; German version CEN/TS 14425-1:2003
DIN CEN ISO/TS 23758:2022-02 Guidelines for the validation of qualitative screening methods for the detection of residues of veterinary drugs in milk and milk products (ISO/TS 23758:2021); German version CEN ISO/TS 23758:2021
DIN EN ISO 16140-2/A1:2023-08 Microbiology of the food chain - Method validation - Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method - AMENDMENT 1: Revision of qualitative MCS data evaluation, RLOD calculations in the ILS, calculati...
DIN EN ISO 11114-4:2017-09 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO 11114-4:2017); German version EN ISO 11114-4:2017
DIN EN 12447:2021-11 Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis in water; German version EN 12447:2021

International Electrotechnical Commission (IEC), Selectivity in method validation

IEC PAS 62137-3:2008 Electronics assembly technology - Selection guidance of environmental and endurance test methods for solder joints
IEC 91/784/PAS:2008 Electronics assembly technology - Selection guidance of environmental and endurance test methods for solder joints

Professional Standard - Nuclear Industry, Selectivity in method validation

EJ/T 1231.4-2008 Test method for analysis of impurity in diuranate.Part4: Determination of fluorine and chlorine by ion selective electrode

Lithuanian Standards Office , Selectivity in method validation

LST EN 1093-1-2009 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods
LST EN ISO 17402:2011 Soil quality - Requirements and guidance for the selection and application of methods for the assessment of bioavailability of contaminants in soil and soil materials (ISO 17402:2008)

AENOR, Selectivity in method validation

UNE-EN 1093-1:2009 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods

Illuminating Engineering Society of North America, Selectivity in method validation

IESNA LM-28-2012 Approved Method: IES Guide for the Selection, Care, and Use of Electrical Instruments in the Photometric Laboratory

European Committee for Electrotechnical Standardization（CENELEC）, Selectivity in method validation

EN 62137-3:2012 Electronics assembly technology - Part 3: Selection guidance of environmental and endurance test methods for solder joints

Japanese Industrial Standards Committee (JISC), Selectivity in method validation

JIS C 62137-3:2014 Electronics Assembly Technology.Part 3: Selection guidance of environmental and endurance test methods for solder joints

Professional Standard - Hygiene , Selectivity in method validation

WS/T 27-1996 Urine.Separate Determination of organic,inorganic and total mercury.Selective reduction cold atomic absorption spectrometric method

Standard Association of Australia （SAA）, Selectivity in method validation

AS 2300.2.3:2008

ESDU - Engineering Sciences Data Unit, Selectivity in method validation

ESDU 98004-1998 Design and performance evaluation of heat exchangers: the effectiveness-NTU method. Part 2: performance comparisons and selection of configurations presented in Part 3.

Professional Standard - Agriculture, Selectivity in method validation

水产品质量安全检验手册 9.3.1.0-2005 Chapter IX Fishing Feed Inspection Section 3 Fishing Feed Routine Physical and Chemical Testing Methods 1. Determination of Fluorine in Fishing Feed--Ion Selective Electrode Method (GBT 13083-2002)
水产品质量安全检验手册 7.2.1.3-2005 Chapter 7 Inspection of additives in aquatic products Section 2 Determination of sweeteners in aquatic products 1. Determination of sodium saccharin (GBT 5009.28-2003) (3) Determination method of ion selective electrode

European Telecommunications Standards Institute (ETSI), Selectivity in method validation

ETSI EN 300 338-3-2017 Technical characteristics and methods of measurement for equipment for generation@ transmission and reception of Digital Selective Calling (DSC) in the maritime MF@ MF/HF and/or VHF mobile service; Part 3: Class D DSC (V1.2.1)
ETSI EN 300 338-6-2017 Technical characteristics and methods of measurement for equipment for generation@ transmission and reception of Digital Selective Calling (DSC) in the maritime MF@ MF/HF and/or VHF mobile service; Part 6: Class M DSC (V1.1.1)
ETSI EN 300 338-2-2017 Technical characteristics and methods of measurement for equipment for generation@ transmission and reception of Digital Selective Calling (DSC) in the maritime MF@ MF/HF and/or VHF mobile service; Part 2: Class A/B DSC (V1.4.1)
ETSI EN 300 338-4-2017 Technical characteristics and methods of measurement for equipment for generation@ transmission and reception of Digital Selective Calling (DSC) in the maritime MF@ MF/HF and/or VHF mobile service; Part 4: Class E DSC (V1.2.1)
ETSI EN 300 338-5-2017 Technical characteristics and methods of measurement for equipment for generation@ transmission and reception of Digital Selective Calling (DSC) in the maritime MF@ MF/HF and/or VHF mobile service; Part 5: Handheld VHF Class H DSC (V1.2.1)

IX-FAO, Selectivity in method validation

CAC/GL 60-2006(Ch) Guidelines for the use of traceability/product tracing methods in food inspection and certification systems
CAC/GL 60-2006(En) Guidelines for the use of traceability/product tracing methods in food inspection and certification systems

Inner Mongolia Provincial Standard of the People's Republic of China, Selectivity in method validation

DB15/T 688.3-2014 Methods for Chemical Analysis of Thorium Dioxide Powder Part 3: Determination of Fluorine in Thorium Dioxide Powder—Pyrohydrolysis Ion Selective Electrode Method

GOSTR, Selectivity in method validation

GOST ISO 11114-4-2017 Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Part 4. Test methods for selecting steels resistant to hydrogen embrittlement

ES-UNE, Selectivity in method validation

UNE-EN 12447:2022 Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis in water