ZH

RU

ES

Ultra Low Emission Sampling

Ultra Low Emission Sampling, Total:124 items.

In the international standard classification, Ultra Low Emission Sampling involves: Air quality, Construction materials, Products of the textile industry, Environmental protection, Shipbuilding and marine structures in general, Fuels, Vocabularies, Software development and system documentation, Aerospace engines and propulsion systems, Energy and heat transfer engineering in general, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Fluid storage devices, Valves, Nuclear energy engineering, Protection against fire.


Association Francaise de Normalisation, Ultra Low Emission Sampling

  • NF X43-329:2003 Émissions de sources fixes - Prélèvement et mesurage d'hydrocarbures aromatiques polycycliques à l'émission
  • NF ISO 10396:2007 Émissions de sources fixes - Échantillonnage pour la détermination automatisée des concentrations d'émission de gaz pour des systèmes fixes de surveillance
  • NF ISO 2889:2021 Echantillonnage de substances radioactives en suspension dans l'air dans les émissaires de rejet et les conduits des installations nucléaires
  • NF ISO 15713:2006 Émissions de sources fixes - Échantillonnage et détermination de la teneur en fluorure gazeux
  • FD CEN/TR 16220:2011 Produits de construction - Évaluation de l'émission de substances dangereuses - Complément relatif à l'échantillonnage
  • FD X43-319:2010 Émissions de sources fixes - Guide de prélèvement et d'analyse de composés organiques volatils
  • NF ISO 11338-1:2005 Émissions de sources fixes - Détermination des hydrocarbures aromatiques polycycliques sous forme gazeuse et particulaire - Partie 1 : échantillonnage
  • NF EN 16402:2019 Peintures et vernis - Évaluation des émissions de substances émanant des revêtements dans l'air intérieur - Échantillonnage, conditionnement et essais
  • NF ISO 21741:2021 Émissions de sources fixes - Échantillonnage et détermination de la teneur en mercure dans les gaz de combustion en utilisant un piège d'amalgamation avec de l'or
  • NF X43-121:2021 Stationary source emissions - Sampling and determination of mercury compounds in flue gas using gold amalgamation trap
  • NF X43-122*NF ISO 21741:2021 Stationary source emissions - Sampling and determination of mercury compounds in flue gas using gold amalgamation trap
  • NF EN ISO 13833:2013 Émissions de sources fixes - Détermination du rapport du dioxyde de carbone de la biomasse (biogénique) et des dérivés fossiles - Échantillonnage et détermination du radiocarbone
  • NF ISO 25597:2014 Émissions de sources fixes - Méthode d'essai pour la détermination de la concentration en masse de PM 2,5 et PM 10 dans les gaz émis à la cheminée en utilisant des échantillonneurs cyclone et une dilution d'échantillon
  • NF M60-825:2012 Nuclear energy - Radioactivity measurement in gaseous and liquid effluents - Sampling of liquid effluents in a vessel or a discharge channel
  • XP X43-324-5*XP CEN/TS 1948-5:2015 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5 : long-term sampling of PCDDs/PCDFs and PCBs
  • NF X43-053*NF EN 17359:2020 Stationary source emissions - Bioaerosols and biological agents - Sampling of bioaerosols and collection in liquids - Impingement method
  • XP CEN/TS 1948-5:2015 Émissions de sources fixes - Détermination de la concentration massique en PCDD/PCDF et PCB de type dioxine - Partie 5 : prélevement à long terme de PCDD/PCDF et PCB
  • NF EN 17359:2020 Émissions de sources fixes - Bioaérosols et agents biologiques - Prélèvement des bioaérosols et collecte dans les liquides - Méthode d'impaction par bullage
  • NF EN 1948-4/IN1:2014 Émissions de sources fixes - Détermination de la concentration massique en PCDD/PCDF et PCB de type dioxine - Partie 4 : prélèvement et analyse des PCB de type dioxine
  • NF EN 1948-4+A1:2014 Émissions de sources fixes - Détermination de la concentration massique en PCDD/PCDF et PCB de type dioxine - Partie 4 : prélèvement et analyse des PCB de type dioxine
  • NF X70-102*NF ISO 19702:2016 Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier transform infrared (FTIR) spectroscopy
  • XP CEN/TS 13649:2015 Émissions de sources fixes - Détermination de la concentration massique en composés organiques gazeux individuels - Échantillonnage par adsorption et extraction par solvant ou thermodésorption
  • NF EN ISO 15011-2:2009 Hygiène et sécurité en soudage et techniques connexes - Méthode de laboratoire d'échantillonnage des fumées et des gaz - Partie 2 : détermination des débits d'émission du monoxyde de carbone (CO), du dioxyde de carbone (CO2), du monoxyde d'...
  • NF EN ISO 15011-3:2009 Hygiène et sécurité en soudage et techniques connexes - Méthode de laboratoire d'échantillonnage des fumées et des gaz - Partie 3 : détermination du débit d'émission d'ozone lors du soudage à l'arc
  • NF X43-710:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Part 1 : measurement at low concentrations by use of impactors.

Standard Association of Australia (SAA), Ultra Low Emission Sampling

  • AS 4323.1:1995 Stationary source emissions - Selection of sampling positions
  • AS/NZS 4323.4:2009
  • AS 4323.2:1995(R2014) Stationary source emissions - Determination of total particulate matter - Isokinetic manual sampling - Gravimetric method
  • AS 4323.1:2021 Stationary source emissions, Method 1: Selection of sampling positions and measurement of velocity in stacks
  • AS 4323.2:2023 Stationary source emissions, Method 2: Determination of total particulate matter — Isokinetic manual sampling — Gravimetric method
  • AS 4323.2:1995 Stationary source emissions - Determination of total particulate matter - Isokinetic manual sampling - Gravimetric method
  • AS 4323.2:1995(R2014) Stationary source emissions - Determination of total particulate matter - Isokinetic manual sampling - Gravimetric method

Group Standards of the People's Republic of China, Ultra Low Emission Sampling

  • T/CCAS 022-2022 Ultra-low emission standard of air pollutants for cement industry
  • T/CNITA 05105-2021 Specification for filter bags for ultra-low emissions of industrial dust
  • T/SDJHXH 001-2022 Coking Industry Ultra-Low Emission Assessment and Monitoring Technical Guidelines
  • T/CSEE 0290-2022 Technical Guidelines for Post-Evaluation of Ultra-Low Emission Projects in Coal-fired Power Plants
  • T/CSES 25-2021 Granular coal based activated carbon for ultra low emission of flue gas from iron and steel industry
  • T/JSEE 019-2020 Coal-fired power plant ultra-low emission monitoring system integration technical guidelines
  • T/CECA-G 0023-2019 Acceptance requirements for comprehensive energy consumption of coal-fired industrial boilers with ultra-low emission of flue gas
  • T/CSES 09-2020 Specification for verification for air pollutants ultra-low emission technologies of coal-fired power plants

Hebei Provincial Standard of the People's Republic of China, Ultra Low Emission Sampling

  • DB13/ 2169-2018 Ultra-low emission standards for air pollutants in the iron and steel industry
  • DB13/ 2167-2020 Ultra-low emission standards for air pollutants in the cement industry
  • DB13/ 2863-2018 Ultra-low emission standards for air pollutants in the coking chemical industry
  • DB13/ 2168-2020 Ultra-low emission standards for air pollutants in the flat glass industry
  • DB13/T 2782-2018 General Technical Specifications for Delayed Continuous Monitoring System of Ultra-low Emission Stationary Pollution Sources

Professional Standard - Agriculture, Ultra Low Emission Sampling

  • 空气和废气监测分析方法 5.1.4-2003 Chapter 5 Pollution Source Monitoring Chapter 1 Sampling 4 Emission Concentration Calculation of Emissions
  • 空气和废气监测分析方法 7.2.3-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter 2 Sample Collection of Atmospheric Particulate Matter Emission Sources Three-source Sample Collection Methods

British Standards Institution (BSI), Ultra Low Emission Sampling

  • BS ISO 11711-1:2013 Ships and marine technology. Piping and machinery. Ballast water sampling and analysis. Discharge sampling port
  • BS ISO 21741:2020 Stationary source emissions. Sampling and determination of mercury compounds in flue gas using gold amalgamation trap
  • BS ISO 11711-1:2019 Tracked Changes. Ships and marine technology. Aquatic nuisance species. Ballast water discharge sample port
  • 19/30349187 DC BS ISO 21741. Stationary source emissions. Sampling and determination of mercury compounds in flue gas using gold amalgamation trap
  • BS ISO 20041-1:2022 Tritium and carbon-14 activity in gaseous effluents and gas discharges of nuclear installations - Sampling of tritium and carbon-14
  • BS EN 17359:2020 Stationary source emissions. Bioaerosols and biological agents. Sampling of bioaerosols and collection in liquids. Impingement method
  • 19/30382408 DC BS EN 17359. Stationary source emissions. Bioaerosols and biological agents. Sampling of bioaerosols and collection in liquids. Impingement method
  • 20/30395670 DC BS ISO 20041-1. Tritium and carbon-14 activity in gaseous effluents and gas discharges of nuclear installations. Part 1. Sampling of tritium and carbon-14
  • BS PD CEN/TS 13649:2014 Stationary source emissions. Determination of the mass concentration of individual gaseous organic compounds. Sorptive sampling method followed by solvent extraction or thermal desorption

Professional Standard - Environmental Protection, Ultra Low Emission Sampling

  • HJ 2053-2018 Technical specifications for ultra-low emission flue gas treatment engineering in coal-fired power plants

AENOR, Ultra Low Emission Sampling

  • UNE-ISO 10396:2009 Stationary source emissions. Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
  • UNE-EN 1948-1:2007 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
  • UNE-EN ISO 13833:2013 Stationary source emissions - Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide - Radiocarbon sampling and determination (ISO 13833:2013)

Society of Automotive Engineers (SAE), Ultra Low Emission Sampling

  • SAE J1094A-1978 CONSTANT VOLUME SAMPLER SYSTEM FOR EXHAUST EMISSIONS MEASUREMENT
  • SAE ARP1256D-2011 Procedure for the Continuous Sampling and Measurement of Gaseous Emissions from Aircraft Turbine Engines
  • SAE ARP1256B-1990 Procedure for the Continuous Sampling and Measurement of Gaseous Emissions from Aircraft Turbine Engines
  • SAE ARP1256E-2023 Procedure for the Continuous Sampling and Measurement of Gaseous Emissions from Aircraft Turbine Engines
  • SAE ARP1256A-1980 PROCEDURE FOR THE CONTINUOUS SAMPLING AND MEASUREMENT OF GASEOUS EMISSIONS FROM AIRCRAFT TURBINE ENGINES
  • SAE ARP1256-1971 PROCEDURE FOR THE CONTINUOUS SAMPLING AND MEASUREMENT OF GASEOUS EMISSIONS FROM AIRCRAFT TURBINE ENGINES
  • SAE AIR6241A-2020 Procedure for the Continuous Sampling and Measurement of Non-Volatile Particle Emissions from Aircraft Turbine Engines
  • SAE ARP6320A-2021 Procedure for the Continuous Sampling and Measurement of Non-Volatile Particulate Matter Emissions from Aircraft Turbine Engines

International Organization for Standardization (ISO), Ultra Low Emission Sampling

  • ISO/DIS 5409:2023 Stationary source emissions — Sampling and determination of mercury in flue gas using chemical absorption method
  • ISO 10396:1993 Stationary source emissions; sampling for the automated determination of gas concentrations
  • ISO 11711-1:2013 Ships and marine technology - Piping and machinery - Ballast water sampling and analysis - Part 1: Discharge sampling port
  • ISO/CD 5409 Stationary source emissions — Sampling and determination of mercury in flue gas using chemical absorption method
  • ISO 21741:2020 Stationary source emissions - Sampling and determination of mercury compounds in flue gas using gold amalgamation trap
  • ISO/CD 19702 Sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy

Danish Standards Foundation, Ultra Low Emission Sampling

  • DS/ISO 10396:2007 Stationary source emissions - Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
  • DS/ISO 21741:2020 Stationary source emissions – Sampling and determination of mercury compounds in flue gas using gold amalgamation trap
  • DS/EN 1948-1:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
  • DS/EN ISO 13833:2013 Stationary source emissions - Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide - Radiocarbon sampling and determination

SAE - SAE International, Ultra Low Emission Sampling

  • SAE ARP1256C-2006 Procedure for the Continuous Sampling and Measurement of Gaseous Emissions from Aircraft Turbine Engines
  • SAE ARP6320-2018 Procedure for the Continuous Sampling and Measurement of Non-Volatile Particulate Matter Emissions from Aircraft Turbine Engines (Includes Access to Additional Content)

Korean Agency for Technology and Standards (KATS), Ultra Low Emission Sampling

  • KS V ISO 11711-1-2014(2019) Ships and marine technology — Piping and machinery — Ballast water sampling and analysis — Part 1: Discharge sampling port

CEN - European Committee for Standardization, Ultra Low Emission Sampling

  • EN 1911-1:1998 Stationary Source Emissions - Manual Method of Determination of HCI - Part 1: Sampling of Gases
  • EN 16402:2019 Paints and varnishes - Assessment of emissions of substances from coatings into indoor air - Sampling@ conditioning and testing
  • PREN 16402-2017 Paints and varnishes - Assessment of emissions of substances from coatings into indoor air - Sampling@ conditioning and testing
  • PREN 17359-2019 Stationary source emissions - Bioaerosols and biological agents - Sampling of bioaerosols and collection in liquids - Impingement method

API - American Petroleum Institute, Ultra Low Emission Sampling

  • API PUBL 931 C5-1976 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS CHAPTER 5-SAMPLING AND SURVEYS
  • API PUBL 344-1998 Critical Review of Source Sampling and Analysis Methodologies for Characterizing Organic Aerosol and Fine Particulate Source Emission Profiles

American Society for Testing and Materials (ASTM), Ultra Low Emission Sampling

  • ASTM D5835-20 Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
  • ASTM D6602-00 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
  • ASTM D6602-03a Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
  • ASTM D6602-13(2018) Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
  • ASTM D6602-03be1 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both

German Institute for Standardization, Ultra Low Emission Sampling

  • DIN EN 13648-3:2003 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge; Capacity and sizing; German version EN 13648-3:2002
  • DIN EN 16402:2019-08 Paints and varnishes - Assessment of emissions of substances from coatings into indoor air - Sampling, conditioning and testing; German version EN 16402:2019
  • DIN EN 1948-1:2006-06 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs; German version EN 1948-1:2006
  • DIN EN ISO 13833:2013-07 Stationary source emissions - Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide - Radiocarbon sampling and determination (ISO 13833:2013); German version EN ISO 13833:2013
  • DIN EN 17359:2020-10 Stationary source emissions - Bioaerosols and biological agents - Sampling of bioaerosols and collection in liquids - Impingement method; German version EN 17359:2020
  • DIN CEN/TS 1948-5:2015-06*DIN SPEC 33970:2015-06 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of PCDDs/PCDFs and PCBs; German version CEN/TS 1948-5:2015
  • DIN EN 17359:2020 Stationary source emissions - Bioaerosols and biological agents - Sampling of bioaerosols and collection in liquids - Impingement method
  • DIN EN ISO 16000-11:2023-04 Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO/DIS 16000-11:2023); German and English version prEN ISO 16000-...
  • DIN EN 1948-4:2014-03 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs; German version EN 1948-4:2010+A1:2013
  • DIN CEN/TS 16429:2013 Stationary source emissions - Sampling and determination of hydrogen chloride content in ducts and stacks - Infrared analytical technique; German version CEN/TS 16429:2013
  • DIN CEN/TS 13649:2015-03*DIN SPEC 33969:2015-03 Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption; German version CEN/TS 13649:2014

未注明发布机构, Ultra Low Emission Sampling

  • BS ISO 25597:2013(2015) Stationary source emissions — Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution
  • BS EN 1948-1:2006(2019) Stationary source emissions - Determination of the mass concentration of PCDDs / PCDFs and dioxin - like PCBs Part 1 : Sampling of PCDDs / PCDFs

Association of German Mechanical Engineers, Ultra Low Emission Sampling

  • VDI 3863 Blatt 2-1991 Gaseous emission measurement; determination of acrylonitrile; gas chromatographic method; sampling by absorption in low temperature solvents
  • VDI 3868 Blatt 1-1994 Determination of total emission of metals, metalloids, and their compounds - Manual measurement in flowing, emitted gases - Sampling system for particulate and filter-passing matter

CZ-CSN, Ultra Low Emission Sampling

  • CSN 83 4721 Cast.2-1987 Air Pollution Control. Determination of nitrogen oxides emissions from stationary sources. Sampling for manual measurement

ES-UNE, Ultra Low Emission Sampling

  • UNE-EN 16402:2020 Paints and varnishes - Assessment of emissions of substances from coatings into indoor air - Sampling, conditioning and testing
  • UNE-EN 17359:2021 Stationary source emissions - Bioaerosols and biological agents - Sampling of bioaerosols and collection in liquids - Impingement method
  • UNE-CEN/TS 13649:2014 Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption (Endorsed by Asociación Española de Normalización in August...

US-CFR-file, Ultra Low Emission Sampling

  • CFR 40-61.33-2014 Protection of Environment. Part61:National emission standards for hazardous air pollutants. Section61.33:Stack sampling.
  • CFR 40-61.53-2014 Protection of Environment. Part61:National emission standards for hazardous air pollutants. Section61.53:Stack sampling.
  • CFR 40-86.110-94-2014 Protection of Environment. Part86:Control of emissions from new and in-use highway vehicles and engines. Section86.110-94:Exhaust gas sampling system; diesel-cycle vehicles, and Ottocycle vehicles requiring particulate emissions measurements.

Lithuanian Standards Office , Ultra Low Emission Sampling

  • LST EN 1948-1-2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
  • LST ISO 11338-1:2008 Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Part 1: Sampling (ISO 11338-1:2003, identical)
  • LST EN 17359-2020 Stationary source emissions - Bioaerosols and biological agents - Sampling of bioaerosols and collection in liquids - Impingement method

Indonesia Standards, Ultra Low Emission Sampling

PL-PKN, Ultra Low Emission Sampling

  • PN Z04111-02-1989 Air purity protection Microbiological testings Determination number of bacteria in the atmospheric air (imision) with sampling by aspiration and sedimentation method

CH-SNV, Ultra Low Emission Sampling

  • SN EN 17359-2021 Stationary source emissions - Bioaerosols and biological agents - Sampling of bioaerosols and collection in liquids - Impingement method

IT-UNI, Ultra Low Emission Sampling

  • UNI EN 17359-2021 Stationary source emissions - Bioaerosols and biological agents - Sampling of bioaerosols and collection in liquids - Impingement method

European Committee for Standardization (CEN), Ultra Low Emission Sampling

  • CEN/TS 1948-5:2015 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of PCDDs/PCDFs and PCBs
  • PD CEN/TS 13649:2014 Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption
  • PD CEN/TS 1948-5:2015 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of PCDDs/PCDFs and PCBs




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved