ZH
RU
ES

Ultra Low Emission Testing

Ultra Low Emission Testing, Total:228 items.

In the international standard classification, Ultra Low Emission Testing involves: Environmental protection, Software development and system documentation, Construction materials, Products of the textile industry, Air quality, Fuels, Vocabularies, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Energy and heat transfer engineering in general, Non-destructive testing, Road engineering, Acoustics and acoustic measurements, Fluid storage devices, Valves, Applications of information technology, Power stations in general, Electricity. Magnetism. Electrical and magnetic measurements, Testing of metals, Iron and steel products, Buildings, Measurement of fluid flow, Shipbuilding and marine structures in general, Motor cycles and mopeds, Internal combustion engines, Water quality, Wastes, Terminology (principles and coordination), Road vehicles in general, Radiation measurements, Electrical engineering in general, Diagnostic, maintenance and test equipment, Internal combustion engines for road vehicles, Radiation protection, Switchgear and controlgear, Domestic, commercial and industrial heating appliances, Safety of machinery, Protection against dangerous goods, Organic chemicals, Electrical wires and cables, Adhesives.

Group Standards of the People's Republic of China, Ultra Low Emission Testing

T/SDJHXH 001-2022 Coking Industry Ultra-Low Emission Assessment and Monitoring Technical Guidelines
T/JSEE 019-2020 Coal-fired power plant ultra-low emission monitoring system integration technical guidelines
T/CCAS 022-2022 Ultra-low emission standard of air pollutants for cement industry
T/CNITA 05105-2021 Specification for filter bags for ultra-low emissions of industrial dust
T/CSEE 0290-2022 Technical Guidelines for Post-Evaluation of Ultra-Low Emission Projects in Coal-fired Power Plants
T/CSES 25-2021 Granular coal based activated carbon for ultra low emission of flue gas from iron and steel industry
T/CECA-G 0023-2019 Acceptance requirements for comprehensive energy consumption of coal-fired industrial boilers with ultra-low emission of flue gas
T/SMHTA 004-2023 DetectionMethod for Asphalt Gas Emission
T/CSES 09-2020 Specification for verification for air pollutants ultra-low emission technologies of coal-fired power plants
T/CIPR 050-2022 Technical requirements for sewage discharge testing and monitoring
T/QGCML 335-2022 Zero Energy Cabin Carbon Emission Detection System
T/CEC 555-2021 Technical Specifications for Partial Discharge Ultrasonic Detector
T/GDCKCJH 063-2022 Performance requirements and testing methods for ultra-low frequency withstand voltage testers
T/CSTM 00422-2022 Non-destructive testing — B-scan test method for low and medium frequency ultrasonic guided waves based on magnetostrictive effect
T/GDIOT 007-2023 Technical specifications for ultrasonic testing of pressure and discharge structures of semi-submersible transportation equipment
T/CSTM 00423-2022 Non-destructive testing — Characterization and verification of low and medium frequency ultrasonic guided wave testing equipment based on magnetostrictive effect
T/CSEE 0335-2022 Technical Guidelines for Ultrasonic Surface Wave Detection of Small-diameter Pipes in Dense Pipe Discharge in Power Stations
T/ACEF 005-2020 Technical requirements and test specifications for pollutant emission control in dry cleaning industry
T/HNAEPI 002-2021 Technical requirement and test method of on-line thallium monitor for pollutant discharge wastewater
T/SMA 0028-2022 Intelligent detection of ultra-wide band partial discharge in power equipment Part 1: General rules
T/SMA 0029-2022 Intelligent detection of ultra-wide band partial discharge in power equipment Part 2: Pulse sequence fast grouping technology

Hebei Provincial Standard of the People's Republic of China, Ultra Low Emission Testing

DB13/ 2169-2018 Ultra-low emission standards for air pollutants in the iron and steel industry
DB13/ 2167-2020 Ultra-low emission standards for air pollutants in the cement industry
DB13/ 2863-2018 Ultra-low emission standards for air pollutants in the coking chemical industry
DB13/ 2168-2020 Ultra-low emission standards for air pollutants in the flat glass industry
DB13/T 2782-2018 General Technical Specifications for Delayed Continuous Monitoring System of Ultra-low Emission Stationary Pollution Sources
DB13/T 2583-2017 Test method for exhaust gas emission from civil clean combustion stoves

AT-ON, Ultra Low Emission Testing

OENORM M 9421-2021 Handling of the results of emission measurements below the limit of quantification and detection
ONORM M 7455-1990 Fan-assisted gas burners with low NOx-emission; nitrogen oxide measurement

Professional Standard - Environmental Protection, Ultra Low Emission Testing

HJ 2053-2018 Technical specifications for ultra-low emission flue gas treatment engineering in coal-fired power plants
HJ/T 76-2001 Specifications and test procedures for continuous emission monitoring systems of flue gas emitted from stationary sources
HJ 733-2014 Guideline for the determination of volatile organic compound leaks and uncovered liquid surface emissions
HJ/T 76-2007 Specifications and test procedures for continuous emission monitoring systems of flue gas emitted from stationary sources (on trial)
HJ 76-2017 Technical requirements and detection methods of continuous monitoring system for flue gas (SO2, NOx, particulate matter) emissions from stationary pollution sources

Danish Standards Foundation, Ultra Low Emission Testing

DS/EN 1593/A1:2004 Non-destructive testing - Leak testing - Bubble emission techniques
DS/EN 1593:2002 Non-destructive testing - Leak testing - Bubble emission techniques
DS/ISO 17479:2013 Motorcycles - Measurement methods for gaseous exhaust emissions during inspection or maintenance
DS/EN 13284-2:2005 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
DS/EN 13284-1:2002 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
DS/EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
DS/EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors
DS/EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method

Lithuanian Standards Office , Ultra Low Emission Testing

LST EN 1593-2001 Non-destructive testing - Leak testing - Bubble emission techniques
LST EN 1593-2001/A1-2004 Non-destructive testing - Leak testing - Bubble emission techniques
LST EN 12619-2000 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon at low concentrations in flue gases - Continuous flame ionisation detector method
LST EN 13284-2-2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
LST EN 13284-1-2002 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
LST ISO 3929:2004 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance (idt ISO 3929:2003)
LST EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)
LST EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010)
LST EN 50525-3-21-2011 Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) -- Part 3-21: Cables with special fire performance - Flexible cables with halogen-free crosslinked insulation, and low emission of smoke

AENOR, Ultra Low Emission Testing

UNE-EN 1593/A1:2004 Non-destructive testing - Leak testing - Bubble emission techniques
UNE 36455:1982 LONGITUDINAL-BEAM ULTRASONIC INSPECTION OF NON ALLOY AND LOW-ALLOY STEEL CASTING
UNE-ISO 12141:2006 Stationary source emissions -- Determination of mass concentration of particulate matter (dust) at low concentrations -- Manual gravimetric method (ISO 12141:2002)
UNE-EN ISO 23210:2010 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)
UNE-EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
UNE-EN ISO 25140:2011 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010)

CZ-CSN, Ultra Low Emission Testing

CSN IEC 761-6:1993 Equipment for continuously monitoring radioactivity in gaseous effluents. Part 6: Specific requirements for transuranic aerosol effluent monitors
CSN ISO 6416:1994 Measurement of liquid flow in open channels. Measurements of discharge by ultrasonic (acoustic) method
CSN IEC 60761-2 ZZ1:2005

Society of Automotive Engineers (SAE), Ultra Low Emission Testing

SAE J2889-1-2011 Measurement of Minimum Noise Emitted by Road Vehicles

SAE - SAE International, Ultra Low Emission Testing

SAE J2889-1-2014 Measurement of Minimum Noise Emitted by Road Vehicles

German Institute for Standardization, Ultra Low Emission Testing

DIN EN 13648-3:2003 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge; Capacity and sizing; German version EN 13648-3:2002
DIN 38402-6:1991 German standard methods for the examination of water, waste water and sludge; general information (group A); assessment of the minimum frequency for controlling water constituents in discharges (emission strategy) (A 6)
DIN EN 13284-1:2018-02 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method; German version EN 13284-1:2017
DIN EN ISO 23210:2009-12 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009); German version EN ISO 23210:2009
DIN EN 13284-2:2018 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems
DIN EN 13284-2:2018-02 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems; German version EN 13284-2:2017 / Note: Applies in conjunction with DIN EN 14181 (2015-02).
DIN EN ISO 25140:2010-12 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010); German version EN ISO 25140:2010
DIN EN 12619:2013-04 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method; German version EN 12619:2013

HU-MSZT, Ultra Low Emission Testing

National Metrological Verification Regulations of the People's Republic of China, Ultra Low Emission Testing

JJG 688-1990 Verification Regulation of Vehicle Exhaust Emission Measuring Instruments
JJG 688-2007 Vehicle Exhaust Emissions Measuring Instruments
JJG 688-2017 Verification Regulations for Automobile Emission Gas Tester
JJG(船舶) 04-1991 Verification regulations for ultra-low frequency hysteresis loop tester
JJG(京) 45-2011 Remote Sensing Ignition Engine Vehicles Detector for Emit Harmful Gas
JJG(京)45-2011 Remote Sensing Ignition Engine Vehicles Detector for Emit Harmful Gas

API - American Petroleum Institute, Ultra Low Emission Testing

API 4109-1971 EVALUATION OF INSTRUMENTS FOR VEHICLE EXHAUST EMISSION INSPECTION
API 4238- STUDY OF ULTRASONIC VORTEX EFFECT AND TRACER GAS METHOD ON MEASUREMENT OF AUTOMOTIVE MASS EMISSIONS
API SMART LEAK-2004 Smart Leak Detection and Repair (LDAR) for Control of Fugitive Emissions

ECMA - European Association for Standardizing Information and Communication Systems, Ultra Low Emission Testing

328-2001 Detection and Measurement of Chemical Emissions from Electronic Equipment

Beijing Provincial Standard of the People's Republic of China, Ultra Low Emission Testing

DB11/ 207-2003 Emission controls and measurement standard for oil-gas from tank truck
DB11/ 318-2022 Emission limits and measurement methods of exhaust pollutants from in-use gasoline vehicles (remote sensing detection method)
DB11/ 1476-2017 Rapid detection method and emission limit value of nitrogen oxides in heavy-duty vehicles
DB11/ 183-2010 Smoke emission limits and measurement methods during deceleration of three-wheeled vehicles and low-speed trucks

National Metrological Technical Specifications of the People's Republic of China, Ultra Low Emission Testing

JJF(机械) 1003-2018 Calibration specification for light vehicle emission detection system
JJF(机械)1003-2018 Calibration specification for light vehicle emission detection system
JJF 1227-2009 Calibration Spectification for Exhaust Pollutants from Gasoline Vehicle under Steady-state Loaded Mode Measurement System

American Society for Testing and Materials (ASTM), Ultra Low Emission Testing

ASTM D7036-04 Standard Practice for Competence of Air Emission Testing Bodies
ASTM E2558-07 Standard Test Method for Determining Particulate Matter Emissions from Fires in Low Mass Wood-Burning Fireplaces
ASTM E2558-07e1 Standard Test Method for Determining Particulate Matter Emissions from Fires in Low Mass Wood-Burning Fireplaces
ASTM E2558-09 Standard Test Method for Determining Particulate Matter Emissions from Fires in Low Mass Wood-Burning Fireplaces
ASTM D7184-12 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
ASTM D7184-13 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
ASTM D7184-15(2019)e1 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
ASTM D7184-19 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
ASTM D7184-15 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
ASTM D7184-20 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection

Association Standard-China Association for Standardization, Ultra Low Emission Testing

CAS 125-2005 Fueling Specification of Reference Fuel during Engine Inspections of Motor Vehicles In-use

Korean Agency for Technology and Standards (KATS), Ultra Low Emission Testing

KS D 0248-1994 Methods for ultrasonic examination for carbon and low alloy steel forgings
KS D 0248-2014 Methods of ultrasonic examination for carbon and low alloy steel forgings
KS B ISO 3058-2001(2021) Non-destructive testing－Aids to visual inspection－Selection of low-power magnifiers
KS B ISO 3058-2001(2016) Non-destructive testing－Aids to visual inspection－Selection of low-power magnifiers
KS R 1046-2001 Road vehicles &##8211; Measurement methods for exhaust gasemissions during inspection or maintenance
KS B ISO 3058:2022 Non-destructive testing — Aids to visual inspection —Selection of low-power magnifiers
KS R 1046-2001(2011) Road vehicles?Measurement methods for exhaust gasemissions during inspection or maintenance
KS R ISO 3929-2006(2021) Road vehicles－Measurement methods for exhaust gas emissions during inspection or maintenance
KS R ISO 3929-2006(2016) Road vehicles－Measurement methods for exhaust gas emissions during inspection or maintenance
KS R ISO 3929:2006 Road vehicles－Measurement methods for exhaust gas emissions during inspection or maintenance
KS I ISO 25140-2012(2017) Stationary source emissions－Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS I ISO 12141:2017 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
KS I ISO 12141:2022 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
KS I ISO 25140:2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS I ISO 23210:2012 Stationary source emissions－Determination of PM10/PM2.5 mass concentration in flue gas－Measurement at low concentrations by use of impactors
KS I ISO 23210:2022 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at low concentrations by use of impactors
KS I ISO 23210:2017 Stationary source emissions－Determination of PM10/PM2.5 mass concentration in flue gas－Measurement at low concentrations by use of impactors

Heilongjiang Provincial Standard of the People's Republic of China, Ultra Low Emission Testing

DB23/T 3559-2023 Heilongjiang Province Ultra-Low Energy Building Inspection Technical Standards

Shandong Provincial Standard of the People's Republic of China, Ultra Low Emission Testing

DB37/T 2706-2015 Technical Specifications for Monitoring Low-concentration Exhaust Gases from Stationary Pollution Sources

Hubei Provincial Standard of the People's Republic of China, Ultra Low Emission Testing

DB42/T 1276-2017 Limits and detection methods of exhaust pollutants from in-use vehicles in Hubei Province (telemetry method)

VN-TCVN, Ultra Low Emission Testing

TCVN 5879-2009 Non-destructive testing.Aids to visual inspection.Selection of low-power magnifiers
TCVN 6204-2008 Road vehicles.Measurement methods for exhaust gas emissions during inspection or maintenance

YU-JUS, Ultra Low Emission Testing

JUS C.A7.092-1985 Non destructive testing. Aids to visual inspection. Selection of low-power magnifiers

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Ultra Low Emission Testing

GB/T 20968-2007 Non-destructive testing.Aids to visual inspection.Selection of low-power magnifiers
GB/T 7165.6-1989 Equipment for continuously monitoring radioactivity in gaseous effluents--Part 6: Specific requirements for transuranic aerosol effluent monitors
GB 19756-2005 Limits and measurement methods for exhaust pollutants from diesel engines of tri - wheel & low - speed goods vehicles
GB/T 7165.2-2008 Equipment for continuous monitoring of radioactivity in gaseous effluents.Part 2:Specific requirements for radioactive aerosol monitors including transuranic aerosols

未注明发布机构, Ultra Low Emission Testing

BS ISO 3058:1998(1999) Non - destructive testing — Aids to visual inspection — Selection of low - power magnifiers

British Standards Institution (BSI), Ultra Low Emission Testing

BS ISO 17479:2013 Motorcycles. Measurement methods for gaseous exhaust emissions during inspection or maintenance
BS ISO 19449:2015 Mopeds. Measurement methods for gaseous exhaust emissions during inspection or maintenance
BS EN 13284-2:2005 Stationary source emissions - Determination of low range mass concentration of dust - Automated measuring systems
BS EN 13284-2:2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
BS ISO 17479:2013+A1:2020 Motorcycles. Measurement methods for gaseous exhaust emissions during inspection or maintenance
BS EN 13648-3:2002 Cryogenic vessels. Safety devices for protection against excessive pressure. Determination of required discharge. Capacity and sizing
BS EN 13648-3:2002(2008) Cryogenic vessels. Safety devices for protection against excessive pressure. Determination of required discharge. Capacity and sizing
BS EN 13284-1:2002 Stationary source emissions - Determination of low range mass concentration of dust - Manual gravimetric method
BS ISO 3058:1998 Non-destructive testing - Aids to visual inspection - Selection of low-power magnifiers
BS ISO 3929:2003 Road vehicles. Measurement methods for exhaust gas emissions during inspection or maintenance
BS EN 13284-1:2017 Tracked Changes. Stationary source emissions. Determination of low range mass concentration of dust. Manual gravimetric method
19/30392436 DC BS ISO 17479 AMD1. Motorcycles. Measurement methods for gaseous exhaust emissions during inspection or maintenance
BS EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors
BS EN 12619:2013 Stationary source emissions. Determination of the mass concentration of total gaseous organic carbon. Continuous flame ionisation detector method
BS EN 13284-2:2017 Tracked Changes. Stationary source emissions. Determination of low range mass concentration of dust. Quality assurance of automated measuring systems
BS EN ISO 25140:2010 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
BS EN 13999-3:2007 Adhesives — Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application — Part 3: Determination of volatile aldehydes
BS EN 13999-3:2007+A1:2009 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 3:Determination of volatile aldehydes

中华人民共和国环境保护部, Ultra Low Emission Testing

环发〔2005〕15号 Technical Specifications for In-use Motor Vehicle Emission Pollutant Testing Institutions

Professional Standard - Machinery, Ultra Low Emission Testing

JB/T 6012.4-2008 Internal combustion engines.Intake and exhaust valves.Part4:Friction welding valves.Ultrasonic testing

KR-KS, Ultra Low Emission Testing

KS B ISO 3058-2022 Non-destructive testing — Aids to visual inspection —Selection of low-power magnifiers
KS I ISO 12141-2017 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
KS I ISO 23210-2017 Stationary source emissions－Determination of PM10/PM2.5 mass concentration in flue gas－Measurement at low concentrations by use of impactors
KS I ISO 12141-2022 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
KS I ISO 25140-2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS I ISO 23210-2022 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at low concentrations by use of impactors

International Organization for Standardization (ISO), Ultra Low Emission Testing

ISO 17479:2013 Motorcycles - Measurement methods for gaseous exhaust emissions during inspection or maintenance
ISO/DIS 12141:2023 Stationary source emissions - Determination of low range mass concentration of dust - Manual gravimetric method
ISO/CD 12141 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
ISO 17479:2013/Amd 1:2020 Motorcycles — Measurement methods for gaseous exhaust emissions during inspection or maintenance — Amendment 1
ISO 3929:2003 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance
ISO 3929:1995 Road vehicles - Measurement methods for exhaust gas emmissions during inspection or maintenance
ISO 19449:2015 Mopeds — Measurement methods for gaseous exhaust emissions during inspection or maintenance
ISO 23210:2009 Stationary source emissions - Determination of PM<(Index)10>/PM<(Index)2,5> mass concentration in flue gas - Measurement at low concentrations by use of impactors

Association of German Mechanical Engineers, Ultra Low Emission Testing

VDI 2466 Blatt 2-2008 Gaseous emission measurement - Measurement of methane - Automatic method - Flame ionisation detector (FID)
VDI 3863 Blatt 2-1991 Gaseous emission measurement; determination of acrylonitrile; gas chromatographic method; sampling by absorption in low temperature solvents
VDI 3862 Blatt 5-2008 Gaseous emission measurement - Measurement of lower aldehydes especially acrolein with the 2-HMP-method - GC-method
VDI 3860 Blatt 3-2011 Measurement of landfill gas - Measurement of surface emissions using the flame ionisation detector (FID)
VDI 3481 Blatt 4-2007 Gaseous emission measurement - Measurement of the concentrations of total organic carbon and methane carbon using the flame ionisation detector (FID)
VDI 2459 Blatt 1-2000 Gaseous emission measurement - Determination of carbon monoxide concentration using flame ionisation detection after reduction to methane
VDI 3481 Blatt 3-1995 Gaseous emission measurement - Determination of volatile organic compounds, especially solvents, flame ionization detector (FID)

Zhejiang Provincial Standard of the People's Republic of China, Ultra Low Emission Testing

DB33/T 2167-2018 Technical specification for low-concentration emission monitoring of waste gas from stationary pollution sources in coal-fired power plants

Association Francaise de Normalisation, Ultra Low Emission Testing

NF ISO 3929:2004 Véhicules routiers - Méthodes de mesure des émissions gazeuses au cours des inspections ou de la maintenance
NF EN 13284-1:2017 Émissions de sources fixes - Détermination de faibles concentrations en masse de poussières - Partie 1 : méthode gravimétrique manuelle
NF EN ISO 25140:2010 Émissions de sources fixes - Méthode automatique pour la détermination de la concentration en méthane par détection à ionisation de flamme (FID)
NF R10-018*NF ISO 3929:2004 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance
NF R10-018:1996 Road vehicles. Measurement procedures for exhaust gas emissions during inspection or maintenance.
NF EN ISO 20088-3:2019 Détermination de la résistance des matériaux d'isolation thermique suite à un refroidissement cryogénique - Partie 3 : émission sous forme de jet
NF X43-333-1*NF EN 13284-1:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 1 : Manual gravimetric method
NF EN ISO 23210:2009 Émissions de sources fixes - Détermination de la concentration en masse de PM10/PM2,5 dans les effluents gazeux - Mesurage à des faibles concentrations au moyen d'impacteurs
NF EN 12619:2013 Émissions de sources fixes - Détermination de la concentration massique en carbone organique total - Méthode du détecteur continu à ionisation de flamme
NF EN 13284-2:2017 Émissions de sources fixes - Détermination de faibles concentrations en masse de poussières - Partie 2 : assurance qualité des systèmes de mesurage automatisés
NF X43-333-2*NF EN 13284-2:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 2 : quality assurance of automated measuring systems
NF E09-080-2:2008 Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2 : methodology leading to verification procedures.
NF R10-019:1996 Road vehicles. Measurement equipment for exhaust gas emissions during inspection or maintenance. Technical specifications.
NF F37-040:1977 Railway transport equipment. Tank wagons for carrying liquified gases under pressure and having bottom filling and emptying devices. Maximum service pressure 40 bars. Air orifice for gauging, degassing and testing.
NF X43-353*NF EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID).

International Electrotechnical Commission (IEC), Ultra Low Emission Testing

IEC 60761-6:1991 Equipment for continuously monitoring radioactivity in gaseous effluents; part 6: specific requirements for transuranic aerosol effluent monitors

TR-TSE, Ultra Low Emission Testing

TS 2399-1976 NON - DESTRUCTIVE TESTING - A?DS TO VISUAL INSPECTION - SEUECTION OF LOW - POWER MAGNIFIERS

ES-UNE, Ultra Low Emission Testing

UNE 199142-3:2022 Road traffic management equipment. Artificial vision. Offending vehicles detection. Part 3: Functional requirements and application protocol for monitoring in Low Emission Zones and UVARs
UNE-EN 13284-1:2018 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
UNE-EN 13284-2:2018 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems

Liaoning Provincial Standard of the People's Republic of China, Ultra Low Emission Testing

DB21/T 3793-2023 Technical Specifications for Low Concentration Emission Monitoring of Stationary Pollution Source Exhaust Gas from Coal-fired Power Plants in Liaoning Province

IN-BIS, Ultra Low Emission Testing

IS 7666-1975

RU-GOST R, Ultra Low Emission Testing

GOST R ISO 25140-2017 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection

TH-TISI, Ultra Low Emission Testing

TIS 1727-1998 Road vehicles.measurement methods for exhaust gas emissions during inspection or maintenace

Professional Standard - Electricity, Ultra Low Emission Testing

DL/T 1807-2018 Oil-immersed power transformer, reactor partial discharge ultrasonic detection and location guidelines
DL/T 1250-2013 Application guidelines for charged gas-insulated metal-enclosure switchgear device partial discharge detection with ultrasonic method
DL/T 1250-2023

SE-SIS, Ultra Low Emission Testing

SIS SS IEC 861:1989 Nuc/ear instrumentation — Equipment for continuously monitoring for beta and gamma emitting radionucleides in liquid effluents

European Committee for Standardization (CEN), Ultra Low Emission Testing

EN 13284-2:2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
EN 13284-2:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems
EN 13284-1:2001 Stationary Source Emissions - Determination of Low Range Mass Concentration of Dust - Part 1: Manual Gravimetric Method
EN 13284-1:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
EN 13526:2001 Stationary Source Emissions - Determination of the Mass Concentration of Total Gaseous Organic Carbon in Flue Gases From Solvent Using Processes - Continuous Flame Ionisation Detector Method
EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Ultra Low Emission Testing

IEEE C62.32-1981 Standard Test Specifications for Low-Voltage Air Gap Surge-Protective Devices (Excluding Valve and Expulsion Devices)

Hunan Provincial Standard of the People's Republic of China, Ultra Low Emission Testing

DB43/T 2315-2022 Performance testing method of digital atmospheric pressure temperature and humidity comprehensive instrument for motor vehicle pollutant emission measurement