ZH

RU

ES

Determination of sludge concentration

Determination of sludge concentration, Total:500 items.

In the international standard classification, Determination of sludge concentration involves: Wastes, Raw materials for rubber and plastics, Construction materials, Air quality, Environmental protection, Vocabularies, Corrosion of metals, Metalliferous minerals, Water quality, Protection against fire, Pulps, Inorganic chemicals, Test conditions and procedures in general, General methods of tests and analysis for food products, Prepackaged and prepared foods, Milk and milk products, Measurement of fluid flow, Coals, Radiation measurements, Soil quality. Pedology, Paper and board, Spices and condiments. Food additives, Fruits. Vegetables, Laboratory medicine, Analytical chemistry, Rubber, Fuels, Beverages, Fertilizers, Nuclear energy engineering, Particle size analysis. Sieving, Welding, brazing and soldering, Alarm and warning systems, CHEMICAL TECHNOLOGY, Road engineering, Refractories, Explosion protection, Protection against dangerous goods, Non-metalliferous minerals, Natural gas, Occupational safety. Industrial hygiene, Machine tools, Paints and varnishes, Photography, Power transmission and distribution networks, Pesticides and other agrochemicals, Meat, meat products and other animal produce, Fluid power systems, Diagnostic, maintenance and test equipment, Ventilators. Fans. Air-conditioners.


European Committee for Standardization (CEN), Determination of sludge concentration

  • EN 14702-2:2006 Characterisation of sludges - Settling properties - Part 2: Determination of thickenability
  • EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)
  • EN 14672:2005 Characterization of sludges - Determination of total phosphorus
  • EN 12176:1998 Characterization of Sludge - Determination of pH-Value
  • EN 13342:2000 Characterisation of sludges - Determination of Kjeldahl nitrogen
  • EN 15933:2012 Sludge, treated biowaste and soil - Determination of pH
  • EN 12879:2000 Characterization of Sludges - Determination of the Loss on Ignition of Dry Mass
  • EN 12880:2000 Characterization of sludges - Determination of dry residue and water content
  • EN ISO 4119:1996 Pulps - Determination of Stock Concentration (ISO 4119 : 1995)
  • EN 15058:2006 Stationary source emissions Determination of the mass concentration of carbon monoxide (CO) Reference method: Non-dispersive infrared spectrometry
  • EN 196-6:1989 Methods of Testing Cement; Determination of Fineness
  • EN 1131:1994 Fruit and vegetable juices - Determination of the relative density

German Institute for Standardization, Determination of sludge concentration

  • DIN EN 14702-2:2006 Characterisation of sludges - Settling properties - Part 2: Determination of thickenability English version of DIN EN 14702-2:2006-06
  • DIN EN 14702-1:2006-06 Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index); German version EN 14702-1:2006
  • DIN EN 14672:2005-10 Characterization of sludges - Determination of total phosphorus; German version EN 14672:2005
  • DIN EN 15170:2009-05 Characterization of sludges - Determination of calorific value; German version EN 15170:2008
  • DIN EN 13342:2001-01 Characterization of sludges - Determination of Kjeldahl nitrogen; German version EN 13342:2000
  • DIN EN 14701-4:2019-12 Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludge; German version EN 14701-4:2018
  • DIN EN 14701-4:2019 Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludge
  • DIN EN ISO 4119:1996 Pulps - Determination of stock concentration (ISO 4119:1995); German version EN ISO 4119:1996
  • DIN EN 13342:2001 Characterization of sludges - Determination of Kjeldahl nitrogen; German version EN 13342:2000
  • DIN EN 14672:2005 Characterization of sludges - Determination of total phosphorus; English version of DIN EN 14672
  • DIN 38414-12:1986 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of phosphorus in sludges and sediments (S 12)
  • DIN 10318:1995 Determination of the density of buttermilk serum
  • DIN ISO 2005:2017 Rubber latex, natural, concentrate - Determination of sludge content (ISO 2005:2014)
  • DIN EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009); German version EN ISO 23210:2009
  • DIN EN 14702-3:2020-04 Characterisation of sludges - Settling properties - Part 3: Determination of zone settling velocity (ZSV); German version EN 14702-3:2019
  • DIN 58932-4:2003 Haematology - Determination of the concentration of blood corpuscles in blood - Part 4: Reference procedure for the determination of the concentration of leucocytes
  • DIN 38414-15:1990 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of the specific residual beta activity in sludge, sediment and suspended matter (S 15)
  • DIN EN 12880:2001-02 Characterization of sludges - Determination of dry residue and water content; German version EN 12880:2000 / Note: To be replaced by DIN EN 15934 (2009-05).
  • DIN EN 12879:2001 Characterization of sludges - Determination of the loss on ignition of dry mass; German version EN 12879:2000
  • DIN 58932-3:1994 Haematology; determination of the concentration of blood corpuscles in blood; determination of the concentration of erythrocytes; reference method
  • DIN 38414-6:1986-04 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of oxygen consumption rate (S 6)
  • DIN 38409-10:1980-07 German standard methods for the examination of water, waste water and sludge; general measures of effects and substances (group H), determination of the settleable matter by mass concentration in water and waste water (H10)
  • DIN 58932-3:2017-01 Haematology - Determination of the concentration of blood corpuscles in blood - Part 3: Reference method for the determination of the concentration of erythrozytes; Text in German and English
  • DIN EN ISO 23210:2009-12 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009); German version EN ISO 23210:2009
  • DIN EN 12880:2001 Characterization of sludges - Determination of dry residue and water content; German version EN 12880:2000
  • DIN 38409-60:2019-12 German standard methods for the examination of water, waste water and sludge - Parameters characterizing effects and substances (group H) - Part 60: Spectrometric determination of the chlorophyll-a concentration in water (H 60)
  • DIN 58932-5:2007-10 Haematology - Determination of the concentration of blood corpuscles in blood - Part 5: Reference method for the determination of the concentration of thrombocytes; Text in German and English
  • DIN 58932-3:2023-07 Haematology - Determination of the concentration of blood corpuscles in blood - Part 3: Reference method for the determination of the concentration of erythrocytes; Text in German and English / Note: Date of issue 2023-06-02*Intended as replacement for...
  • DIN 58932-4:2003-07 Haematology - Determination of the concentration of blood corpuscles in blood - Part 4: Reference procedure for the determination of the concentration of leucocytes
  • DIN EN 14702-1:2006 Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index) English version of DIN EN 14702-1:2006-06
  • DIN ISO 125:2014-11 Natural rubber latex concentrate - Determination of alkalinity (ISO 125:2011)
  • DIN ISO 125:2008 Natural rubber latex concentrate - Determination of alkalinity (ISO 125:2003);English version of DIN ISO 125:2008-06
  • DIN EN ISO 4119:1996-05 Pulps - Determination of stock concentration (ISO 4119:1995); German version EN ISO 4119:1996
  • DIN 38414-22:2018-10 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 22: Determination of dry residue by freezing and preparation of the freeze dried mass of sludge (S 22)
  • DIN 58932-5:2007 Haematology - Determination of the concentration of blood corpuscles in blood - Part 5: Reference method for the determination of the concentration of thrombocytes; Text in German and English
  • DIN 38414-8:1985 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of the amenability to anaerobic digestion (S 8)
  • DIN 38414-4:1984 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of leachability by water (S 4)
  • DIN 38414-9:1986-09 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of the chemical oxygen demand (COD) (S 9)
  • DIN EN 17042:2018-08 Fertilizers - Determination of boron in concentrations > 10 % using acidimetric titration; German version EN 17042:2018
  • DIN 38414-18:2019-06 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 18: Determination of adsorbed organically bound halogens in sludge and sediments (AOX) (S 18)
  • DIN 38414-8:1985-06 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of the amenability to anaerobic digestion (S 8)
  • DIN 58932-6:2021 Haematology - Determination of the concentration of blood corpuscles in blood - Part 6: Reference method for the determination of the concentration of CD4 positive lymphocytes; Text in German and English
  • DIN 38412-37:1999-04 German standard methods for the examination of water, waste water and sludge - Bio-assays (group L) - Part 37: Determination of the inhibitory effect of water on the growth of bacteria (Photobacterium phosphoreum cell multiplication inhibition test) (L...
  • DIN EN 13725:2003 Air quality - Determination of odour concentration by dynamic olfactometry; German version EN 13725:2003
  • DIN EN ISO 9698:2015-12 Water quality - Determination of tritium activity concentration - Liquid scintillation counting method (ISO 9698:2010); German version EN ISO 9698:2015 / Note: To be replaced by DIN EN ISO 9698 (2017-04).
  • DIN 58932-6:2021-08 Haematology - Determination of the concentration of blood corpuscles in blood - Part 6: Reference method for the determination of the concentration of CD4 positive lymphocytes; Text in German and English
  • DIN EN ISO 10062:2023-03 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) (ISO 10062:2022); German version EN ISO 10062:2022
  • DIN 38414-14:2011-08 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 14: Determination of selected polyfluorinated compounds (PFC) in sludge, compost and soil - Method using high performance liquid chroma...
  • DIN ISO 2005:2008 Rubber latex, natural, concentrate - Determination of sludge content (ISO 2005:1992 + Amd. 1:2006);English version of DIN ISO 2005:2008-06
  • DIN 38409-10:1980 German standard methods for the examination of water, waste water and sludge; general measures of effects and substances (group H), determination of the settleable matter by mass concentration in water and waste water (H10)
  • DIN 58932-3:2017 Haematology - Determination of the concentration of blood corpuscles in blood - Part 3: Reference method for the determination of the concentration of erythrozytes; Text in German and English

VN-TCVN, Determination of sludge concentration

  • TCVN 6320-2016 Rubber latex,natural,concentrate - Determination of sludge content
  • TCVN 6320-2007 Rubber latex, natural, concentrade.Determination of sludge content
  • TCVN 4857-2007 Natural rubber latex concentrate.Determination of alkalinity
  • TCVN 4857-2015 Natural rubber latex concentrate -Determination of alkalinity
  • TCVN 5975-2010 Stationary source emissions.Determination of the mass concentration of sulfur dioxide.Hydrogen peroxide/barium perchlorate/Thorin method
  • TCVN 6016-2011 Cement.Test methods.Determination of strength
  • TCVN 4030-2003 Cement.Test method for determination of fineness
  • TCVN 6830-2016 Water quality - Determination of tritium activity concentration - Liquid scintillation counting method

International Organization for Standardization (ISO), Determination of sludge concentration

  • ISO 2005:1985 Natural rubber latex concentrate — Determination of sludge content
  • ISO 23210:2009 Stationary source emissions - Determination of PM<(Index)10>/PM<(Index)2,5> mass concentration in flue gas - Measurement at low concentrations by use of impactors
  • ISO 10396:1993 Stationary source emissions; sampling for the automated determination of gas concentrations
  • ISO/CD 13610:2023 Sludge recovery, recycling, treatment and disposal — Determination of calorific value of sludge
  • ISO 12141:2002 Stationary source emissions - Determination of mass concentration of particulate matter (dust) at low concentrations - Manual gravimetric method
  • ISO 2005:1974 Natural rubber latex — Determination of sludge content
  • ISO 4119:1995 Pulps - Determination of stock concentration
  • ISO 11657:2014 Hydrometry - Suspended sediment in streams and canals - Determination of concentration by surrogate techniques
  • ISO 9096:1992 Stationary source emissions; determination of concentration and mass flow rate of particulate material in gas-carrying ducts; manual gravimetric method
  • ISO 125:2003 Natural rubber latex concentrate - Determination of alkalinity
  • ISO 125:1990 Natural rubber latex concentrate; determination of alkalinity
  • ISO 125:2011 Natural rubber latex concentrate - Determination of alkalinity
  • ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
  • ISO/CD 12141 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
  • ISO 4119:1978 Pulps; Determination of stock concentration (Rapid method)
  • ISO 679:2009 Cement - Test methods - Determination of strength
  • ISO 905:1976 Hydrochloric acid for industrial use; Evaluation of hydrochloric acid concentration by measurement of density
  • ISO 911:1977 Sulphuric acid for industrial use; Evaluation of sulphuric acid concentration by measurement of density
  • ISO 125:2020 Natural rubber latex concentrate — Determination of alkalinity
  • ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors
  • ISO 679:1989 Methods of testing cements; determination of strength
  • ISO 4405:1991 Hydraulic fluid power; fluid contamination; determination of particulate contamination by the gravimentric method

GOSTR, Determination of sludge concentration

  • GOST ISO 2005-2017 Natural rubber latex concentrate. Determination of sludge content
  • GOST 28326.4-1989 Technical liquid ammonia. Determination of oil mass concentration by spectrophotometry method

AENOR, Determination of sludge concentration

  • UNE 53627:1988 NATURAL RUBBER LATEX CONCENTRATE. DETERMINATION OF SLUDGE CONTENT
  • UNE-EN 14702-1:2007 Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
  • UNE-EN 15170:2009 Characterization of sludges - Determination of calorific value
  • UNE-EN 14672:2006 Characterization of sludges - Determination of total phosphorus
  • UNE-EN 14701-4:2010 Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludges
  • UNE-ISO 125:2012 Natural rubber latex concentrate. Determination of alkalinity
  • UNE 73320-2:2004 Procedure for the ambient radioactivity determination. Sampling. Part 2: Sludges.
  • UNE-ISO 12141:2006 Stationary source emissions -- Determination of mass concentration of particulate matter (dust) at low concentrations -- Manual gravimetric method (ISO 12141:2002)
  • UNE-EN ISO 23210:2010 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)

Korean Agency for Technology and Standards (KATS), Determination of sludge concentration

  • KS M ISO 2005:2021 Rubber latex, natural, concentrate —Determination of sludge content
  • KS I ISO 23210:2012 Stationary source emissions-Determination of PM10/PM2.5 mass concentration in flue gas-Measurement at low concentrations by use of impactors
  • KS I ISO 12141:2007 Stationary source emissions-Determination of mass concentration of particulate matter(dust) at low concentrations-Manual gravimetric method
  • KS I ISO 25139:2013 Stationary source emissions ― Manual method for the determination of the methane concentration using gas chromatography
  • KS M ISO 4119:2006 Pulps-Determination of stock concentration
  • KS M ISO 4119:2016 Pulps-Determination of stock concentration
  • KS M ISO 4119:2021 Pulps — Determination of stock concentration
  • KS M ISO 125:2010 Natural rubber latex concentrate-Determination of alkalinity
  • KS M ISO 125:2015 Natural rubber latex concentrate-Determination of alkalinity
  • KS I ISO 25140:2012 Stationary source emissions-Automatic method for the determination of the methane concentration using flame ionization detection(FID)
  • KS I ISO 13271-2014(2019) Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors
  • KS A 0079-1982 General rule of measuring methods for airborne dust concentration in environmental atmosphere
  • KS I ISO 12141:2017 Stationary source emissions-Determination of mass concentration of particulate matter(dust) at low concentrations-Manual gravimetric method
  • KS I ISO 12141:2022 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
  • KS D 0061-2005 Methods for measurement of dust concentration in welding environment
  • KS D ISO 10062:2019 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
  • KS I ISO 23210:2022 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at low concentrations by use of impactors
  • KS L ISO 679:2006 Methods of testing cements-Determination of strength
  • KS L 3127-2010 Testing method for cone penetration of refractory mortar
  • KS I ISO 23210:2017 Stationary source emissions-Determination of PM10/PM2.5 mass concentration in flue gas-Measurement at low concentrations by use of impactors
  • KS M ISO 125:2021 Natural rubber latex concentrate — Determination of alkalinity
  • KS I ISO 13271:2014 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors
  • KS L ISO 679-2006(2016) Methods of testing cements-Determination of strength
  • KS L ISO 679-2006(2021) Methods of testing cements-Determination of strength
  • KS I ISO 4405:2005 Hydraulic fluid power-Fluid contamination-Determination of particulate contamination by the gravimetric method
  • KS R ISO 11614:2001 Reciprocating internal combustion compression-ignition engines- Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas

KR-KS, Determination of sludge concentration

  • KS M ISO 2005-2021 Rubber latex, natural, concentrate —Determination of sludge content
  • KS M ISO 4119-2021 Pulps — Determination of stock concentration
  • KS M ISO 4119-2016 Pulps-Determination of stock concentration
  • KS I ISO 23210-2017 Stationary source emissions-Determination of PM10/PM2.5 mass concentration in flue gas-Measurement at low concentrations by use of impactors
  • KS I ISO 12141-2017 Stationary source emissions-Determination of mass concentration of particulate matter(dust) at low concentrations-Manual gravimetric method
  • KS I ISO 12141-2022 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
  • KS D ISO 10062-2019 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
  • KS I ISO 23210-2022 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at low concentrations by use of impactors
  • KS M ISO 125-2021 Natural rubber latex concentrate — Determination of alkalinity
  • KS L ISO 679-2022 Cement — Test methods — Determination of strength

Association Francaise de Normalisation, Determination of sludge concentration

  • NF T97-001-3:2018 Caractérisation des boues - Essais des boues - Partie 3 : détermination de la siccité de référence
  • NF EN 14702-2:2006 Caractérisation des boues - Propriétés de sédimentation - Partie 2 : détermination de l'aptitude à l'épaississement
  • NF EN 14702-1:2006 Caractérisation des boues - Propriétés de sédimentation - Partie 1 : détermination de l'aptitude à la sédimentation (Détermination du volume de boues et de l'indice de boues)
  • NF T42-019/A1:2006 Rubber latex, natural, concentrate - Determination of sludge content - Amendment 1 : precision data.
  • FD CEN/TR 15252:2006 Caractérisation des boues - Protocole de validation des méthodes de détermination des propriétés physiques des boues
  • NF T97-001-1:2018 Caractérisation des boues - Essais des boues - Partie 1 : détermination de la siccité limite
  • NF X44-052:2002 Émissions de sources fixes - Détermination de fortes concentrations massiques de poussières - Méthode gravimétrique manuelle
  • NF EN 15170:2009 Caractérisation des boues - Détermination du pouvoir calorifique
  • NF EN 14701-4:2018 Caractérisation des boues - Propriétés de filtration - Partie 4 : détermination de l'aptitude à l'égouttage des boues floculées
  • NF X33-036*NF EN 15170:2009 Characterization of sludges - Determination of calorific value.
  • NF EN 13342:2000 Caractérisation des boues - Détermination de l'azote Kjeldahl
  • NF X43-710:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Part 1 : measurement at low concentrations by use of impactors.
  • NF X43-013:1977 Atmospheric pollution.determination of the concentration by mass ofsulphur dioxide, in the ambient air.analysis by the thorin spectrophotometric method.
  • FD X43-070-6:2019 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 6 : estimation of the uncertainties on mass concentrations of particulate matters measured automatically
  • NF Q50-006*NF EN ISO 4119:1996 Pulps. Determination of stock concentration.
  • NF EN ISO 4119:1996 Pâtes - Détermination de la concentration en pâte
  • NF X43-353*NF EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID).
  • NF T42-005:2011 Natural rubber latex concentrate - Determination of alkalinity.
  • NF V05-001:1959 Food products. Vinegar. Determination of acetic acid concentration.
  • NF EN 13211:2001 Qualité de l'air - Émissions de sources fixes - Méthode manuelle de détermination de la concentration en mercure total
  • NF X33-027-3*NF EN 14702-3:2019 Characterisation of sludges - Settling properties - Part 3 : determination of zone settling velocity (ZSV)
  • NF EN 14702-3:2019 Caractérisation des boues - Propriétés de sédimentation - Partie 3 : détermination de la vitesse du front de sédimentation (ZSV)
  • NF ISO 38200:2019 Caractérisation des boues - Propriétés de sédimentation - Partie 3 : détermination de la vitesse du front de sédimentation (ZSV)
  • NF ISO 125:2020 Latex concentré de caoutchouc naturel - Détermination de l'alcalinité
  • NF EN ISO 23210:2009 Émissions de sources fixes - Détermination de la concentration en masse de PM10/PM2,5 dans les effluents gazeux - Mesurage à des faibles concentrations au moyen d'impacteurs
  • NF EN ISO 21258:2010 Émissions de sources fixes - Détermination de la concentration massique de protoxyde d'azote (N2O) - Méthode de référence : méthode infrarouge non dispersive
  • NF U44-171:1982 Boues - Amendements organiques - Supports de culture - Détermination de la matière sèche
  • NF U42-467*NF EN 17042:2018 Fertilizers - Determination of boron in concentrations > or 10 % using acidimetric titration
  • NF X33-042-1*NF EN 16720-1:2016 Characterization of Sludges - Physical consistency - Part 1 : determination of flowability - Method by extrusion tube apparatusr
  • FD X43-070-1:2018 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambiant air - Part 1 : general
  • NF M60-407*NF ISO 10980:1998 Validation of the strength of reference solutions used for measuring concentrations.
  • NF X33-027-1*NF EN 14702-1:2006 Characterization of sludges - Settling properties - Part 1 : determination of settleability (Determination of the proportion of sludge volume and sludge volume index).
  • NF EN 196-6:2018 Méthodes d'essai des ciments - Détermination de la finesse
  • NF T42-005*NF ISO 125:2020 Natural rubber latex concentrate - Determination of alkalinity
  • NF ISO 13271:2012 Émissions de sources fixes - Détermination de la concentration en masse de PM10/PM2,5 dans les effluents gazeux - Mesurage à des hautes concentrations à l'aide des impacteurs virtuels
  • NF EN 12880:2000 Caractérisation des boues - Détermination de la teneur en matière sèche et de la teneur en eau
  • NF S66-270:2007 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours.
  • NF X43-342*NF ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors.
  • NF E09-081-9*NF EN 1093-9+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9 : pollutant concentration parameter, room method
  • NF X31-039:2013 Sludge, treated biowaste, soil and waste - Determination of loss on ignition
  • NF X31-117*NF EN ISO 10390:2022 Soil, treated biowaste and sludge - Determination of pH
  • NF EN 14701-3:2006 Caractérisation des boues - Propriétés de filtration - Partie 3 : détermination de la compressibilité
  • NF EN ISO 10390:2022 Sols, biodéchets traités et boues - Détermination du pH
  • NF X43-327:2003 Air quality - Determination of odour concentration by dynamic olfactometry.
  • NF EN 14884:2022 Emissions de sources fixes - Détermination de la concentration en mercure total - Systèmes de mesurage automatisés
  • NF P15-476:1990 Methods of testing cement. Determination of fininess.
  • NF P15-435:2021 Cement testing methods - Determination of density
  • NF X43-308*NF EN ISO 21877:2019 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method
  • NF EN ISO 21877:2019 Émissions de sources fixes - Détermination de la concentration en masse de l'ammoniac - Méthode manuelle
  • XP X43-136:2013 Emissions de sources fixes - Détermination de la concentration en chrome VI hydrosoluble

TR-TSE, Determination of sludge concentration

  • TS 2361-1976 METHODS FOR THE MEASUREMENT OF AIR POLLUTION DETF.RMINATION OF CONCENTRATION OF SUSPENDED MATTER

HU-MSZT, Determination of sludge concentration

AT-ON, Determination of sludge concentration

  • ONORM M 6292-1989 Analysis of sewage Sludge; determination of pH-value in Sludges and Sediments
  • ONORM M 6293-1989 Analysis of sewage Sludge; determination of phosphorus in Sludges and Sediments
  • ONORM M 6296-1993 Analysis of sewage Sludge - Determination of nitrogen components
  • ONORM M 6273-2000 Water analysis-Analysis of activated sludge-Determination of the settled share of sludge volume,the dry residue and the sludge volume index
  • ONORM M 9440-1996 Dispersion of pollutants in the atmosphere - Calculation of ambient air concentrations and determination of Stack heights
  • ONORM M 9405-1993 Determination of asbestos concentration in air Dosage des concentrations d'amiante dans l'air
  • ONORM M 9412-1994 Requirements for evaluation equipment for continuous measurement of the emission of air contaminants
  • ONORM M 6295-1993 Analysis of sewage Sludge - Determination of the residue on ignition and the loss of mass on ignition
  • ONORM EN 196-6-1992 Methods of testing cement - Determination of fineness
  • ONORM M 6290-1988 Analysis of sewage Sludge; digestion with aqua regia for the determination of acid soluble mineral components
  • ONORM M 6270-1985 Determination ofthe water content and dry residue and/or dry matter of Sludge and Sediments

British Standards Institution (BSI), Determination of sludge concentration

  • BS EN 14702-1:2006(2007) Characterization of sludges - Settling properties - Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
  • BS EN ISO 10062:2008 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
  • BS 1747-2:1969 Methods for the measurement of air pollution - Determination of concentration of suspended matter
  • BS ISO 12141:2002 Stationary source emissions. Determination of mass concentration of particulate matter (dust) at low concentrations. Manual gravimetric method
  • BS EN 14701-4:2018 Tracked Changes. Characterization of sludges. Filtration properties. Determination of the drainability of flocculated sludge
  • BS EN 12176:1998 Characterization of sludge - Determination of pH value
  • BS EN ISO 4119:1995 Pulps. Determination of stock concentration
  • BS EN ISO 4119:1996 Pulps. Determination of stock concentration
  • BS ISO 11657:2014 Hydrometry. Suspended sediment in streams and canals. Determination of concentration by surrogate techniques
  • BS 1747-12:1993 Methods for measurement of air pollution. Determination of the mass concentration of ozone in ambient air: chemiluminescence method
  • BS EN ISO 25140:2010 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
  • BS EN 13342:2000 Characterization of sludges - Determination of Kjeldahl nitrogen
  • BS EN 14702-3:2019 Characterisation of sludges - Settling properties - Determination of thickenability
  • BS EN 14702-2:2006(2007) Characterisation of sludges - Settling properties - Determination of thickenability
  • BS EN ISO 21258:2010 Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method - Non-dispersive infrared method
  • BS 1747-9:1987 Methods for measurement of air pollution. Determination of the mass concentration of nitrogen oxides in ambient air: chemiluminescence method
  • BS EN ISO 10062:2022 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
  • BS EN 12879:2000 Characterization of sludges - Determination of the loss of ignition of dry mass
  • BS EN 14701-3:2006(2007) Characterization of sludges - Filtration properties - Determination of the compressibility
  • BS EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors
  • BS EN 196-1:2005 Methods of testing cement - Determination of strength
  • BS ISO 125:2011 Natural rubber latex concentrate. Determination of alkalinity
  • BS ISO 125:2020 Tracked Changes. Natural rubber latex concentrate. Determination of alkalinity
  • BS EN 196-6:2010 Methods of testing cement - Determination of fineness
  • BS EN 17042:2018 Fertilizers. Determination of boron in concentrations > 10 % using acidimetric titration
  • BS ISO 13271:2012 Stationary source emissions. Determination of PM10/PM2,5 mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors
  • BS EN 12880:2000 Characterization of sludges - Determination of dry residue and water content
  • BS EN 14701-2:2013 Characterisation of sludges. Filtration properties. Determination of the specific resistance to filtration
  • BS EN 14701-2:2007 Characterization of sludges - Filtration properties - Determination of the specific resistance to filtration
  • BS EN 13725:2003 Air quality - Determination of odour concentration by dynamic olfactometry
  • BS EN 13725:2022 Air quality - Determination of odour concentration by dynamic olfactometry
  • BS EN 1093-8:1998+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 8: Pollutant concentration parameter, test bench method
  • BS EN 1093-8+A1:1999 Safety of machinery. Evaluation of the emission of airborne hazardous substances. Pollutant concentration parameter, test bench method
  • BS ISO 11564:1998 Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Naphthylethylenediamine photometric method

Japanese Industrial Standards Committee (JISC), Determination of sludge concentration

  • JIS A 1806:2011 Methods of test for production control of concrete -- Method of test for concentration of sludge water
  • JIS P 8225:2003 Pulps -- Determination of stock concentration
  • JIS Z 4513:1977 Measuring methods of beta radioactivity concentration of drain water

IT-UNI, Determination of sludge concentration

Hebei Provincial Standard of the People's Republic of China, Determination of sludge concentration

  • DB13/T 2375-2016 Gravimetric method for determination of low-concentration particulate matter in exhaust gas from stationary pollution sources

Shandong Provincial Standard of the People's Republic of China, Determination of sludge concentration

  • DB37/T 2706-2015 Technical Specifications for Monitoring Low-concentration Exhaust Gases from Stationary Pollution Sources
  • DB37/T 3785-2019 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method
  • DB37/T 2537-2014 Gravimetric method for determination of low-concentration particulate matter in exhaust gas from stationary pollution sources in Shandong Province

Qinghai Provincial Standard of the People's Republic of China, Determination of sludge concentration

  • DB63/T 1873-2020 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Liaoning Provincial Standard of the People's Republic of China, Determination of sludge concentration

  • DB21/T 3270-2020 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method
  • DB21/T 3793-2023 Technical Specifications for Low Concentration Emission Monitoring of Stationary Pollution Source Exhaust Gas from Coal-fired Power Plants in Liaoning Province

Jiangxi Provincial Standard of the People's Republic of China, Determination of sludge concentration

  • DB36/T 1386-2021 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Inner Mongolia Provincial Standard of the People's Republic of China, Determination of sludge concentration

  • DB15/T 2362-2021 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Jilin Provincial Standard of the People's Republic of China, Determination of sludge concentration

  • DB22/T 3426-2023 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Group Standards of the People's Republic of China, Determination of sludge concentration

  • T/XZFW 004-2023 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method
  • T/SEESA 005-2020 Technical Specification for High Concentration Organic Waste Water & Sludge Treatment by Wet Air Oxidation Technology
  • T/XZFW 006-2023 Digital processor for monitoring results of low-concentration particulate matter in exhaust gas from fixed pollution sources
  • T/XZFW 010-2023 Stationary source emission —data processor for monitoring of particulate matter at low concentration
  • T/GXAS 523-2023 Sludge—Determination of fecal coliforms—Enzyme substrate method
  • T/GAIA 011-2021 Method for chemical analysis of industrial sludge -Determination of gold content
  • T/AHFIA 042-2019 Determination of water-soluble potassium in cellar mud of nongxiangxing baijiu by ion chromatography
  • T/ZJATA 0001-2021 Solid waste- determination of calorific value for sludge- bomb calorimetry

Association of German Mechanical Engineers, Determination of sludge concentration

  • VDI 4301 Blatt 1-1997 Indoor air pollution measurement - Determination of the concentration of nitrogen dioxide - Manual photometric method (Saltzman)
  • VDI 2453 Blatt 1-1990 Gaseous air pollution measurement; determination of nitrogen dioxide concentration; photometric manual standard method (Saltzmann)
  • VDI 2453 Blatt 3-1995 Gaseous air pollution measurement - Determination of the nitrogen monoxide and nitrogen dioxide concentration - Preparation of the calibration gas mixtures and determination of their concentration
  • VDI 2452 Blatt 2-1975 Gaseous air pollution measurement; determination of fluoric ion concentration; preseparation and electrometric detection
  • VDI 2452 Blatt 1-1978 Air pollution measurement; measurement of total fluoride ion concentration; impinger method
  • VDI 2454 Blatt 1-1982 Gaseous air pollution measurement; measurement of hydrogen sulphide concentration; molybdenum blue sorption method
  • VDI 2454 Blatt 2-1982 Gaseous air pollution measurement; measurement of hydrogen sulphide concentration; methylene blue Impinger method
  • VDI 3484 Blatt 1-2001 Gaseous ambient air measurements - Indoor-air pollution measurements - Test gases measurements; Measurement of the formaldehyde concentration with the sulfite pararosaniline method
  • VDI 3484 Blatt 2-2001 Gaseous ambient air measurements - Indoor-air pollution measurements - Measurement of the formaldehyde concentration with the acatylacetone method

Danish Standards Foundation, Determination of sludge concentration

  • DS/EN 14702-1:2006 Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
  • DS/EN 12176:1998 Characterization of sludge - Determination of pH-value
  • DS/EN 14672:2005 Characterization of sludges - Determination of total phosphorus
  • DS/EN 15170:2009 Characterization of sludges - Determination of calorific value
  • DS 298:1984 Water quality. Inhibition of activated sludge by determination of oxygen consumption rate
  • DS/EN 13342:2001 Characterisation of sludges - Determination of total Kjeldahl nitrogen
  • DS/EN 14701-4:2010 Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludges
  • DS/EN ISO 4119:1996 Pulps - Determination of stock concentration
  • DS/EN 12879:2001 Characterization of sludges - Determination of the loss on ignition of dry mass
  • DS/EN 12880:2001 Characterization of sludges - Determination of dry residue and water content
  • DS 259:2004 Determination of metals in water, sludge and sediments - General guidelines for determination by atomic absorption spectrophotometry in flame
  • DS/EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors
  • DS/ISO 13161:2011 Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry
  • DS/ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors
  • DS/EN 15933:2012 Sludge, treated biowaste and soil - Determination of pH
  • DS/ISO 10390:2021 Soil, treated biowaste and sludge – Determination of pH
  • DS/ISO 9698:2011 Water quality - Determination of tritium activity concentration - Liquid scintillation counting method

Lithuanian Standards Office , Determination of sludge concentration

  • LST EN 14702-1-2006 Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
  • LST EN 15170-2009 Characterization of sludges - Determination of calorific value
  • LST EN 14672-2005 Characterization of sludges - Determination of total phosphorus
  • LST EN 12176-2000 Characterization of sludge - Determination of pH-value
  • LST EN 13342-2002 Characterization of sludges - Determination of Kjeldahl nitrogen
  • LST EN 14701-4-2010 Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludges
  • LST EN 12879-2002 Characterization of sludges - Determination of the loss on ignition of dry mass
  • LST EN 12880-2002 Characterization of sludges - Determination of dry residue and water content
  • LST EN ISO 4119:2001 Pulps - Determination of stock concentration (ISO 4119:1995)
  • LST EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)
  • LST EN 15933-2012 Sludge, treated biowaste and soil - Determination of pH

RO-ASRO, Determination of sludge concentration

  • STAS SR 13303-1-1995 Chlorous sludge. Moisture determination
  • STAS SR 13303-3-1995 Chlorous sludge Zinc content determination
  • STAS SR 13303-5-1996 Chlorous sludge. Determination of iron content
  • STAS SR 13303-4-1996 Chlorous sludge. Determination of chlorine content
  • STAS SR 13303-2-1995 Chlorous sludge. Determination of copper content
  • STAS 8798/13-1973 NATURAL RUBBER LATEX Determination of sludge content
  • STAS 13117-1992 Sludges resulting from the surface waters treatment and used waters purding. Determination of the chrome conten
  • STAS SR 13179-1994 Sludges resulting from the surface waters treatment and used waters purging. Determination of the copper content
  • STAS SR 13181-1994 Sludges resulting from the surface waters treatment and used waters purging. Determination of the zinc content
  • STAS SR EN 196-6-1989 Methods of testing cement. Determination of finenesse
  • STAS SR 13355-3-1999 Beer. Analysis methods. Determination of alcoholic concentration
  • STAS 8613/4-1980 CONCENTRATED FOOD STUFF Determination of acidity of aqueous extract
  • STAS 13116-1992 Sludges resulting from the surface waters treatement and used waters purification. Determination of compresibility coeficient
  • STAS 9464-1981 Organic dyestufis OPTICAL BLEACHING AGENT Determination of concentration by the spectrophotometry method
  • STAS 8170/1-1980 ORGANIC DYES Determination of delivery concentration by spectroiphotometric method
  • STAS 227/2-1986 Cements PHYSICAL TESTS Grinding fineness determination
  • STAS 184/2-1987 ETHYL ALCOHOL AND ALGOHOLIC DRINKS Determination of alcoholic concentration
  • STAS 12344-1985 Paper and board POLLUTION DEGREE DETERMINATION
  • STAS 13094-1992 Sludges resulting from the surface waters and from the treatement of the used waters. Determination of the nickel content
  • SR EN 196-1-1995 Methods of testing cement - Part 1: Determination of strength
  • STAS 12780-1989 SLUDGES RESULTED FROM SURFACE WATERS TREATMENT AND WASTE WATERS PURIFICATION Specifical resistance determination at vacuum filtration

TN-INNORPI, Determination of sludge concentration

NL-NEN, Determination of sludge concentration

  • NEN 6624-1982 Sludge - Determination of sludge volume index
  • NEN 6511-1984 Water - Determination of acute toxicity in nitrificating active sludge by measurement of ammonia degradation
  • NEN 6414-1988 Water and sludge - Determination of temperature
  • NEN-EN 196-6-1993 Methods of testing cement. Determination of fineness

未注明发布机构, Determination of sludge concentration

CU-NC, Determination of sludge concentration

  • NC 54-393-1987 Construction Materials. Concrete. Determination of the Characteristic Compression Strength
  • NC 44-12-12-1985 Ores. Copper Conoentrates Photometric Deterraination of Arsenic
  • NC 10-72-1988 Metallurgy. Determination of Compression Strength. Testing Method
  • NC 44-12-10-1985 Ores. Copper concentrates Polarographic Determination of lead
  • NC 44-12-15-1985 Ores. Copper Concentrates Silver and Gold Gravimetric Determination
  • NC 44-12-14-1985 Ores. Copper Concentrates Volumetric Determinatlon of Aluminum Oxide
  • NC 83-26-1987 Fermentation Industry Ethyl Alcohol. Determination of Alcoholic Strength
  • NC 44-12-2-1984 Ores Copper Cencentrates. Gravimetrie Determination of Silionum Diexide

ES-UNE, Determination of sludge concentration

  • UNE-EN 14701-4:2020 Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludge
  • UNE-EN 13342:2001 Characterization of sludges - Determination of Kjeldahl nitrogen
  • UNE-EN 14702-3:2020 Characterisation of sludges - Settling properties - Part 3: Determination of zone settling velocity (ZSV)
  • UNE-EN 12880:2001 Characterization of sludges - Determination of dry residue and water content.
  • UNE-EN 17042:2019 Fertilizers - Determination of boron in concentrations > 10 % using acidimetric titration
  • UNE-EN ISO 10390:2022 Soil, treated biowaste and sludge - Determination of pH (ISO 10390:2021) (Endorsed by Asociación Española de Normalización in April of 2022.)
  • UNE-ISO 9096:2005/COR 1:2009 Stationary source emissions -- Manual determination of mass concentration of particulate matter
  • UNE-EN ISO 10062:2023 Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) (ISO 10062:2022)

Hubei Provincial Standard of the People's Republic of China, Determination of sludge concentration

  • DB42/T 1904-2022 Portable β-ray method for the determination of low-concentration particulate matter in exhaust gas from stationary pollution sources

Standard Association of Australia (SAA), Determination of sludge concentration

  • AS 2917.1:1994 Copper sulfide concentrates - Determination of copper content - Titrimetric methods
  • AS 4215.1:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - Determination of fire extinguishing concentrations
  • AS 4215.2:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - Determination of fire inerting concentrations
  • AS/NZS 4323.3:2001 Stationary source emissions - Determination of odour concentration by dynamic olfactometry
  • AS 2884.4:1997 Heavy mineral sand concentrates - Sampling - Determination of precision and bias

ES-AENOR, Determination of sludge concentration

Zhejiang Provincial Standard of the People's Republic of China, Determination of sludge concentration

  • DB33/T 2167-2018 Technical specification for low-concentration emission monitoring of waste gas from stationary pollution sources in coal-fired power plants

工业和信息化部, Determination of sludge concentration

  • HG/T 5364-2018 Method for determination of copper content in copper-containing sludge
  • HG/T 5811-2020 Method for determination of iron content in iron-containing chemical sludge

CZ-CSN, Determination of sludge concentration

American Society for Testing and Materials (ASTM), Determination of sludge concentration

  • ASTM D4913-00(2011) Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors
  • ASTM D4913-00(2016) Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors
  • ASTM D4913-00(2005)e1 Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors
  • ASTM D2088-73 Method for Determination of Low Concentrations of Lead in Paint
  • ASTM D4599-97 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
  • ASTM D459-08 Standard Terminology Relating to Soaps and Other Detergents
  • ASTM D459-08a Standard Terminology Relating to Soaps and Other Detergents
  • ASTM D4599-20 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
  • ASTM D4599-21 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
  • ASTM D6331-14 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations &40;Manual Gravimetric Method&41;

RU-GOST R, Determination of sludge concentration

  • GOST 18294-2004 Drinking water. Method for determination of beryllium content
  • GOST 15113.5-1977 Food concentrates. Methods for determination of acidity
  • GOST 18294-1989 Drinking water. Method for determination of berillium mass concentration
  • GOST 13525.4-1968 Paper and board. Method for the determination of flaw
  • GOST 27198-1987 Fresh grapes. Methods for determination of mass concentration of sugars
  • GOST 4386-1989 Drinking water. Methods for determination of fluorides mass concentration
  • GOST 10650-1972 Peat. Determination of the disintegration degree
  • GOST 13673-1976 Turf. Method for determination of bulk density
  • GOST 24701-2013 Peat. Methods for the determination of density
  • GOST R ISO 13271-2016 Stationary source emissions. Determination of PM/PM mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors
  • GOST 30305.4-1995 Dry dairy products. The procedure of measurement of solubility index
  • GOST 19413-1989 Drinking water. Method for determination of selenium mass concentration
  • GOST 23950-1988 Drinking water. Method for determination of strontium mass concentration
  • GOST 27709-1988 Canned condensed milk. The viscosity estimation method
  • GOST 18132-1972 Peat briquetts and semibriquetts. Method for determination of mechanical strength
  • GOST R 50068-1992 Pulps. Determination of stock concentration (Rapid method)
  • GOST 310.2-1976 Cements. Methods of grinding fineness determination
  • GOST 10650-2013 Peat. Methods for the determination of the disintegration degree
  • GOST 28959-1991 Nitric acid for industrial use. Evaluation of the nitric acid concentration by measurement of density
  • GOST 18165-1989 Drinking water. Method for determination of aluminium mass concentration
  • GOST 4152-1989 Drinking water. Method for determination of arsenic mass concentration
  • GOST 19609.19-1989 Concentrated kaolin. Method for determination of hydrogen ions concentration of water suspension
  • GOST 27753.4-1988 Greenhouse grounds. Method for determination of total salts content
  • GOST R 52391-2005 Wine production. Method for determination of citric acid mass concentration
  • GOST 17818.6-1990 Graphite. Method for determination of hydrogen ions concentration of water suspension and water extract
  • GOST 25183.9-1982 Photographic gelatine. Method of determination of hydrogen ions concentration

PL-PKN, Determination of sludge concentration

Indonesia Standards, Determination of sludge concentration

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Determination of sludge concentration

  • GB/T 5399-2004 Pulps-Determination of stock concentration
  • GB/T 6921-1986 Determination of the concentration of airborne particulate matters
  • GB/T 5399-1985 Pulp--Determination of stock concentration--Rapid method
  • GB/T 208-2014 Test method for determinging cement density
  • GB/T 208-1994 Standard test method for cement density
  • GB/T 8300-2001 Natural rubber latex concentrate--Determination of alkalinity
  • GB/T 8300-2008 Natural rubber latex concenttrate. Determination of alkalinity
  • GB/T 8300-2016 Natural rubber latex concentrate.Determination of alkalinity
  • GB/T 8301-2001 Natural rubber latex concentrate--Determination of mechanical stability
  • GB/T 8301-2008 Natural rubber latex concenttrate. Determination of mechanical stability
  • GB/T 16425-1996 Dctermination for minimum explosive concentration of dust cloud
  • GB/T 2419-1994 Test method for fluidity of cement mortar
  • GB/T 2419-2005 Test method for fluidity of cement mortar
  • GB/T 3776.2-1983 Method of hydrogen ion concentration determination for pesticide emulsifiers
  • GB/T 11276-2007 Determination of Critical Micelle Concentration of Surfactant

国家煤炭工业局, Determination of sludge concentration

  • MT/T 792-1998 Determination method of coal water slurry concentration

国家煤矿安全监察局, Determination of sludge concentration

  • MT 79-1984 Methods for determination of dust concentration and dispersion

YU-JUS, Determination of sludge concentration

Professional Standard - Nuclear Industry, Determination of sludge concentration

  • EJ/T 20089-2014 Determination of Pu α activity in intermediate level radioactive liquid waste and its sludge.TiOA extraction α counting method
  • EJ/T 20186-2018 Determination of 137Cs activity concentration in low-level organic waste liquid by gamma spectroscopy

BELST, Determination of sludge concentration

  • STB 17.13.05-49-2021 Еnvironmental pгоtесtion аnd nature use. Sampling and measurements, monitoring. Water quality. Determination of the mass concentration of nitrogen-containing substances using photometric tests
  • STB 17.13.05-48-2020 Еnvironmental pгоtесtion and nature use. Sampling, measurments and monitoring. Ambient air. Determination of mass concentration of chlorine in emissions into the аmbient air from stationary sources

Professional Standard - Traffic, Determination of sludge concentration

BE-NBN, Determination of sludge concentration

CEN - European Committee for Standardization, Determination of sludge concentration

  • EN 14702-3:2019 Characterisation of sludges - Settling properties - Part 3: Determination of zone settling velocity (ZSV)
  • PREN 17042-2016 Fertilizers - Determination of boron in concentrations > 10 % using acidimetric titration
  • PREN 16720-2-2014 Characterization of sludges - Physical consistency - Part 2: Determination of solidity - Method by pocket vane shear apparatus

Canadian General Standards Board (CGSB), Determination of sludge concentration

  • CGSB 1-GP-71 METH 4.7-1974 Methods of Testing Paints and Pigments Consistency Consistency of Putty by Means of Gardner Mobilometer

SE-SIS, Determination of sludge concentration

Professional Standard - Agriculture, Determination of sludge concentration

Shaanxi Provincial Standard of the People's Republic of China, Determination of sludge concentration

  • DB61/T 1294-2019 Determination of low-concentration sulfur dioxide in exhaust gas from stationary pollution sources Molecular sieve adsorption tube sampling-ion chromatography

American Society of Mechanical Engineers (ASME), Determination of sludge concentration

  • ASME PTC 38-1980 Determining the Concentration of Particulate Matter in a Gas Stream

Taiwan Provincial Standard of the People's Republic of China, Determination of sludge concentration

  • CNS 7250-1989 Method for Determining Average Concentration of Weld Fume in Welding Environment
  • CNS 5596-1980 Method of Test for Determination of Low Concentrations of Lead in Paints
  • CNS 7252-1981 General Rule of Measuring Methods for Airbone Dust Concentration in Environmental Atmosphere

National Metrological Verification Regulations of the People's Republic of China, Determination of sludge concentration

海关总署, Determination of sludge concentration

  • SN/T 5162-2019 Determination of limited oxygen concentrations for flammable gases and vapors

IN-BIS, Determination of sludge concentration

国家市场监督管理总局、中国国家标准化管理委员会, Determination of sludge concentration

  • GB/T 16425-2018 Determination for minimum explosive concentration of dust clouds

中华人民共和国国家卫生和计划生育委员会, Determination of sludge concentration

  • WS/T 222-2002 Guideline for the measurement of catalytic concentration of clinical enzymes
  • GBZ/T 155-2002 Scintillation flask method for measuring radon concentration in the air

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Determination of sludge concentration

  • GB/T 34536-2017 Natural gas—Determination of radon concentration—Scintillation flash method

Institute of Environmental Sciences and Technology, Determination of sludge concentration

Heilongjiang Provincial Standard of the People's Republic of China, Determination of sludge concentration

Professional Standard - Machinery, Determination of sludge concentration

  • JB/T 9878-1999 Determination of dust concentration of metal cutting machine tools

American National Standards Institute (ANSI), Determination of sludge concentration

  • ANSI/I3A IT4.42-1998 Silver in Photographic Films, Papers, Fixing Baths, Sludges, or Residues, Determination of
  • ANSI/PIMA IT4.42-1998 Silver in Photographic Films, Papers, Fixing Baths, Sludges, or Residues, Determination of

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Determination of sludge concentration

  • ASHRAE 4486-2001 Measureing Principles for the Determination of Ice Concentration in Ice Slurry (RP-1166)

Anhui Provincial Standard of the People's Republic of China, Determination of sludge concentration

  • DB34/T 2500-2015 Determination of Performance Index of Activated Sludge in Liquor Industry Wastewater

Military Standard of the People's Republic of China-General Armament Department, Determination of sludge concentration

  • GJB 8342-2015 Method for determination of aerosol concentration and dispersion in field smoke screens

Professional Standard - Electricity, Determination of sludge concentration

  • DL/T 1884.3-2018 On-site pollution degree measurement and assessment part 3: Determination method of pollution components

Professional Standard - Labor and Labor Safety, Determination of sludge concentration

  • LD/T 98-1996 Light-scattering method for determination of dust concentration in air




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved