ZH
RU
ES

Sludge Concentration Determination Method

Sludge Concentration Determination Method, Total:498 items.

In the international standard classification, Sludge Concentration Determination Method involves: Construction materials, Wastes, Air quality, Coals, Environmental protection, Fuels, Protection against fire, Vocabularies, Analytical chemistry, Particle size analysis. Sieving, Beverages, Welding, brazing and soldering, Water quality, Soil quality. Pedology, Explosion protection, Radiation measurements, Inorganic chemicals, Pesticides and other agrochemicals, Photography, Meat, meat products and other animal produce, Extraction and processing of petroleum and natural gas, Radiation protection, Power transmission and distribution networks, Laboratory medicine, Paper and board, Electrical and electronic testing, Insulating fluids, Semiconducting materials, Road engineering, Medical sciences and health care facilities in general, Geology. Meteorology. Hydrology, Earthworks. Excavations. Foundation construction. Underground works, Ventilators. Fans. Air-conditioners, Crude petroleum, Plastics, Railway rolling stock, Chipless working equipment, Microbiology, Non-metalliferous minerals, Measurement of volume, mass, density, viscosity, Lubricants, industrial oils and related products, Paints and varnishes, Nuclear energy engineering, Graphic technology, Products of the chemical industry, Road vehicle systems, Fluid power systems, Agricultural machines, implements and equipment, Insulation.

Japanese Industrial Standards Committee (JISC), Sludge Concentration Determination Method

JIS A 1806:2011 Methods of test for production control of concrete -- Method of test for concentration of sludge water
JIS Z 4513:1977 Measuring methods of beta radioactivity concentration of drain water
JIS Z 4512:1995 Measuring methods of concentration of airborne radioactive particle
JIS B 9920:1989 Measuring methods for airborne particles in clean room and evaluating methods for air cleanliness of clean room
JIS K 7228:1987 Method for measuring smoke density and concentration of gases evolved by incineration or decomposition of plastics
JIS H 0615:2021 Test method for determination of impurity concentrations in silicon crystal by photoluminescence spectroscopy
JIS H 0615:1996 Test method for determination of impurity concentrations in silicon crystal by photoluminescence spectroscopy
JIS B 9930:2000 Hydraulic fluid power -- Fluid contamination -- Determination of particulate contamination by the counting method using a microscope
JIS B 9930:2006 Hydraulic fluid power -- Fluid contamination -- Determination of particulate contamination by the counting method using an optical microscope

European Committee for Standardization (CEN), Sludge Concentration Determination Method

EN 14702-2:2006 Characterisation of sludges - Settling properties - Part 2: Determination of thickenability
EN 196-6:1989 Methods of Testing Cement; Determination of Fineness
EN 13346:2000 Characterization of Sludges - Determination of Trace Elements and Phosphorus - Aqua Regia Extraction Methods
EN 15058:2006 Stationary source emissions Determination of the mass concentration of carbon monoxide (CO) Reference method: Non-dispersive infrared spectrometry
PD CEN/TS 17638:2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method
EN ISO 21877:2019 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method (ISO 21877:2019)
prEN 196-1-1992 Methods of testing cement; part 1: determination of strength
EN 196-1:2005 Methods of testing cement Part 1: Determination of strength
EN 196-1:2016 Methods of testing cement - Part 1: Determination of strength
EN 196-1:1987 Methods of Testing Cement; Determination of Strength
EN 196-1:1994 Methods of Testing Cement - Part 1: Determination of Strength
EN 16339:2013 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
EN 196-6:2010 Methods of testing cement - Part 6: Determination of fineness
EN 12619:1999 Stationary Source Emissions - Determination of the Mass Concentration of Total Gaseous Organic Carbon at Low Concentrations in Flue Gases - Continuous Flame Ionization Detector Method
EN 14789:2005 Stationary source emissions - Determination of volume concentration of oxygen (O2) - Reference method - Paramagnetism
EN 14789:2017 Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism
EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011)
EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method [Superseded: CEN EN 13526]
CEN/TS 17405:2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry
EN ISO 21258:2010 Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method: Non-dispersive infrared method (ISO 21258:2010)
EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010)
EN 196-1:1987/AC1:1989 Methods of testing cement; determination of strength; amendment 1 to EN 196-1:1987
EN 196-1:1987/AC2:1989 Methods of testing cement; determination of strength; amendment 2 to EN 196-1:1987
EN 14792:2005 Stationary source emissions - Determination of mass concentration of nitrogen oxides (NOx) - Reference method: Chemiluminescence

German Institute for Standardization, Sludge Concentration Determination Method

DIN EN 14702-2:2006 Characterisation of sludges - Settling properties - Part 2: Determination of thickenability English version of DIN EN 14702-2:2006-06
DIN 38414-12:1986 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of phosphorus in sludges and sediments (S 12)
DIN 38414-6:1986-04 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of oxygen consumption rate (S 6)
DIN 58932-3:2017-01 Haematology - Determination of the concentration of blood corpuscles in blood - Part 3: Reference method for the determination of the concentration of erythrozytes; Text in German and English
DIN 38412-37:1999-04 German standard methods for the examination of water, waste water and sludge - Bio-assays (group L) - Part 37: Determination of the inhibitory effect of water on the growth of bacteria (Photobacterium phosphoreum cell multiplication inhibition test) (L...
DIN EN 196-1:2016-11 Methods of testing cement - Part 1: Determination of strength; German version EN 196-1:2016
DIN 58932-3:2023-07 Haematology - Determination of the concentration of blood corpuscles in blood - Part 3: Reference method for the determination of the concentration of erythrocytes; Text in German and English / Note: Date of issue 2023-06-02*Intended as replacement for...
DIN 58932-5:2007-10 Haematology - Determination of the concentration of blood corpuscles in blood - Part 5: Reference method for the determination of the concentration of thrombocytes; Text in German and English
DIN CEN/TS 17638:2021-09 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method; German version CEN/TS 17638:2021
DIN EN ISO 21877:2020-01 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method (ISO 21877:2019); German version EN ISO 21877:2019
DIN 58932-5:2007 Haematology - Determination of the concentration of blood corpuscles in blood - Part 5: Reference method for the determination of the concentration of thrombocytes; Text in German and English
DIN VDE 0405-3:1995 Determination of breath alcohol concentration - Part 3: Test method
DIN 38412-31:1989 German standard methods for the examination of water, waste water and sludge; bio-assays (group L); determining the tolerance of fish to the toxicity of waste water by way of a dilution series (L 31)
DIN 38409-10:1980-07 German standard methods for the examination of water, waste water and sludge; general measures of effects and substances (group H), determination of the settleable matter by mass concentration in water and waste water (H10)
DIN 38414-14:2011-08 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 14: Determination of selected polyfluorinated compounds (PFC) in sludge, compost and soil - Method using high performance liquid chroma...
DIN EN 196-6:2019-03 Methods of testing cement - Part 6: Determination of fineness; German version EN 196-6:2018
DIN 38414-4:1984 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of leachability by water (S 4)
DIN 38414-9:1986-09 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of the chemical oxygen demand (COD) (S 9)
DIN 38414-8:1985 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of the amenability to anaerobic digestion (S 8)
DIN EN 13346:2001-04 Characterization of sludges - Determination of trace elements and phosphorus - Aqua regia extraction methods; German version EN 13346:2000
DIN 38409-60:2019-12 German standard methods for the examination of water, waste water and sludge - Parameters characterizing effects and substances (group H) - Part 60: Spectrometric determination of the chlorophyll-a concentration in water (H 60)
DIN 38414-14:2011 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 14: Determination of selected polyfluorinated compounds (PFC) in sludge, compost and soil - Method using high performance liquid chromatog
DIN 58932-6:2021 Haematology - Determination of the concentration of blood corpuscles in blood - Part 6: Reference method for the determination of the concentration of CD4 positive lymphocytes; Text in German and English
DIN 38414-8:1985-06 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of the amenability to anaerobic digestion (S 8)
DIN EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury; German version EN 13211:2001
DIN EN 13211:2001-06 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury; German version EN 13211:2001
DIN EN 13211 Berichtigung 1:2005-06 Air quality - Stationary source emissions - Manual methode of determination of the concentration of total mercury; German version EN 13211:2001, Corrigenda to DIN EN 13211:2001-06; German version EN 13211:2001/AC:2005
DIN 38414-22:2018-10 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 22: Determination of dry residue by freezing and preparation of the freeze dried mass of sludge (S 22)
DIN 38407-22:2001-10 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 22: Determination of Glyphosate and Aminomethyl phosphic acid (AMPA) by high performance liquid chromatography (HPLC), post-...
DIN 38407-35:2010-10 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 35: Determination of selected phenoxyalkyl carbonic acids and further acid plant treatment agents - Method using high perfor...
DIN 38407-44:2018-02 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 44: Determination of selected heterocyclic aromatic hydrocarbons (NSO heterocycles) in water - Method using gas chromatograp...
DIN 38407-42:2011-03 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 42: Determination of selected polyfluorinated compounds (PFC) in water - Method using high performance liquid chromatography...
DIN 38407-36:2014-09 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 36: Determination of selected active substances of plant protection products and other organic substances in water - Method ...
DIN 38407-39:2011-09 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 39: Determination of selected polycyclic aromatic hydrocarbons (PAH) - Method using gas chromatography with mass spectrometr...
DIN 38407-37:2013-11 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 37: Determination of organochlorine pesticides, polychlorinated biphenyls and chlorobenzene in water - Method using gas chro...
DIN EN 196-6:2019 Methods of testing cement - Part 6: Determination of fineness
DIN EN 196-1:2005 Methods of testing cement - Part 1: Determination of strength; German version EN 196-1:2005
DIN 58932-6:2021-08 Haematology - Determination of the concentration of blood corpuscles in blood - Part 6: Reference method for the determination of the concentration of CD4 positive lymphocytes; Text in German and English
DIN 38404-4:1976-12 German Standard Methods for Analysing of Water, Waste Water and Sludge; Physical and Physical-chemical Parameters (Group C); Determination of Temperature (C4)
DIN 38409-10:1980 German standard methods for the examination of water, waste water and sludge; general measures of effects and substances (group H), determination of the settleable matter by mass concentration in water and waste water (H10)
DIN 38414-18:2019-06 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 18: Determination of adsorbed organically bound halogens in sludge and sediments (AOX) (S 18)
DIN 38414-6:1986 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of oxygen consumption rate (S 6)
DIN 58931:2021 Haematology - Determination of haemoglobin concentration in blood - Reference method; Text in German and English
DIN 58931:2021-09 Haematology - Determination of haemoglobin concentration in blood - Reference method; Text in German and English
DIN EN 16339:2013-11 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling; German version EN 16339:2013
DIN EN 14791:2017-05 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method; German version EN 14791:2017
DIN 38414-9:1986 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of the chemical oxygen demand (COD) (S 9)
DIN 38414-19:1999-12 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 19: Determination of the steam-volatile organic acids (S 19)
DIN EN ISO 22032:2009-07 Water quality - Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge - Method using extraction and gas chromatography/mass spectrometry (ISO 22032:2006); German version EN ISO 22032:2009
DIN 38404-18:1994 German standard methods for the examination of water, waste water and sludge; physical and physical-chemical parameters (group C); determination of Radium-226-concentration in potable water, ground water, surface water and waste water (C 18)
DIN CEN/TS 17405:2020-11 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry; German version CEN/TS 17405:2020
DIN 38414-17:1989 German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of strippable and extractable organically bound halogens (S 17)
DIN EN 196-6:2010 Methods of testing cement - Part 6: Determination of fineness; German version EN 196-6:2010
DIN EN 14789:2017-05 Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism; German version EN 14789:2017
DIN 38406-1:1983 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of iron (E 1)
DIN 38406-5:1983-10 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of ammonia-nitrogen (E 5)
DIN 38406-2:1983-05 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of manganese (E 2)
DIN 38406-1:1983-05 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of iron (E 1)
DIN EN 17346:2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers
DIN EN 17346:2020-08 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers; German version EN 17346:2020
DIN CEN/TS 17638:2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method; German version CEN/TS 17638:2021
DIN EN ISO 25139:2011-08 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011); German version EN ISO 25139:2011
DIN 38404-4:1976 German Standard Methods for Analysing of Water, Waste Water and Sludge; Physical and Physical-chemical Parameters (Group C); Determination of Temperature (C4)
DIN 38405-24:1987-05 German standard methods for the examination of water, waste water and sludge; anions (group D); photometric determination of chromium(VI) using 1,5-diphenylcarbonohydrazide (D 24)
DIN 38414-17:2017 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 17: Determination of the organically bound halogens amenable to extraction (EOX) (S 17)
DIN 38404-13:1988 German standard methods for the examination of water, waste water and sludge; physical and physicochemical parameters (group C); determination of tritium (C 13)
DIN 38414-17:2014 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 17: Determination of the organically bound halogens amenable to extraction (EOX) (S 17)
DIN 38414-17:2017-01 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 17: Determination of the organically bound halogens amenable to extraction (EOX) (S 17)
DIN 38413-1:1982-03 German standard methods for the analysis of water, waste water and sludge; Individual components (Group P); Determination of hydrazine (P 1)
DIN 38406-2:1983 German standard methods for the examination of water, waste water and sludge; cations (group E); determination of manganese (E 2)
DIN EN 14792:2017-05 Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence; German version EN 14792:2017
DIN 38407-3:1998-07 German standard methods for the determination of water, waste water and sludge - Jointly determinable substances (group F) - Part 3: Determination of polychlorinated biphenyls (F 3)
DIN 38405-13:1981 German Standard Methods for the Analysis of Water, Waste Water and Sludge; Anions (Group D); Determination of Cyanides (D 13)
DIN 38405-1:1985-12 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of chloride ions (D 1)
DIN 38405-4:1985-07 German standard methods for the examination of water, waste water and sludge; anions (group D); determination of fluoride (D 4)
DIN 38414-24:2000 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 24: Determination of polychlorinated dibenzodioxins (PCDD) and polychlorinated dibenzofuranes (PCDF) (S 24)
DIN 38405-52:2020-11 German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 52: Photometric determination of dissolved chromium(VI) in water (D 52)
DIN 38409-16:1984 German standard methods for the examination of water, waste water and sludge; general measures of effects and substances (group H); determination of the phenol index (H 16)

TR-TSE, Sludge Concentration Determination Method

TS 2361-1976 METHODS FOR THE MEASUREMENT OF AIR POLLUTION DETF.RMINATION OF CONCENTRATION OF SUSPENDED MATTER
TS 2435-1976 Methods For The Measurement of Air Pollution Detera?ination of Lead (Colorimetric Method)

Association Francaise de Normalisation, Sludge Concentration Determination Method

FD CEN/TR 15252:2006 Caractérisation des boues - Protocole de validation des méthodes de détermination des propriétés physiques des boues
NF EN 196-6:2018 Méthodes d'essai des ciments - Détermination de la finesse
NF EN 13211:2001 Qualité de l'air - Émissions de sources fixes - Méthode manuelle de détermination de la concentration en mercure total
NF X44-052:2002 Émissions de sources fixes - Détermination de fortes concentrations massiques de poussières - Méthode gravimétrique manuelle
NF P15-476:1990 Methods of testing cement. Determination of fininess.
NF P15-435:2021 Cement testing methods - Determination of density
NF EN ISO 21258:2010 Émissions de sources fixes - Détermination de la concentration massique de protoxyde d'azote (N2O) - Méthode de référence : méthode infrarouge non dispersive
NF X43-353*NF EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID).
NF X43-013:1977 Atmospheric pollution.determination of the concentration by mass ofsulphur dioxide, in the ambient air.analysis by the thorin spectrophotometric method.
NF P15-471-6:2012 Methods of testing cements - Part 6 : determination of fineness.
NF EN 196-1:2016 Méthodes d'essais des ciments - Partie 1 : détermination des résistances
NF P15-471-1:2006 Methods of testing cement - Part 1 : determination of strength.
NF P15-471:1995 Methods of testing cement. Part 1 : determination of strength.
NF X43-356*NF EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography.
NF EN ISO 25139:2011 Émissions de sources fixes - Méthode manuelle pour la détermination de la concentration en méthane par chromatographie en phase gazeuse
NF X43-336*NF EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury.
NF X33-042-1*NF EN 16720-1:2016 Characterization of Sludges - Physical consistency - Part 1 : determination of flowability - Method by extrusion tube apparatusr
NF X43-028*NF EN 16339:2013 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
NF EN ISO 25140:2010 Émissions de sources fixes - Méthode automatique pour la détermination de la concentration en méthane par détection à ionisation de flamme (FID)
NF X43-372*NF EN 14791:2017 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method
NF EN 14791:2017 Émissions de sources fixes - Détermination de la concentration massique des oxydes de soufre - Méthode de référence normalisée
XP CEN/TS 17405:2020 Emissions de sources fixes - Détermination de la concentration volumique en dioxyde de carbone - Méthode de référence : spectrométrie infrarouge
FD T90-012:2021 Water quality - Determination of metal content - Method for the measurement of metal concentration with passive sampling by diffusive gradient in thin films
NF X43-370*NF EN 14789:2017 Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method : Paramagnetism
NF EN 14789:2017 Émissions de sources fixes - Détermination de la concentration volumique en oxygène - Méthode de référence normalisée : paramagnétisme
NF X43-142*NF EN 17346:2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive Samplers
NF EN 16339:2013 Air ambiant - Méthode pour la détermination de la concentration du dioxyde d'azote au moyen d'échantillonneurs par diffusion
NF EN 17346:2020 Air ambiant - Méthode normalisée pour la détermination de la concentration en ammoniac au moyen d'échantillonneurs par diffusion
XP ISO/TS 19021:2019 Méthode pour déterminer les concentrations des gaz émis lors de l'essai ISO 5659-2 par spectroscopie infrarouge à transformée de Fourier
NF X43-311*NF EN ISO 21258:2010 Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method : non-dispersive infrared method.
NF E09-081-9*NF EN 1093-9+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9 : pollutant concentration parameter, room method
NF E09-081-8*NF EN 1093-8+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8 : pollutant concentration parameter, test bench method
NF U26-033*NF ISO 16236:2013 Crop protection equipment - Test method for the determination of drainable volume and its concentration
NF X43-320*NF EN 1911:2010 Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method.
NF CEN/TS 17340:2020 Emissions de sources fixes - Détermination de la concentration massique en composés fluorés, exprimée en HF - Méthode de référence normalisée
FD CEN/TR 15214-1:2006 Caractérisation des boues - Détection et dénombrement des Escherichia coli dans les boues, les sols, les amendements du sol, les supports de culture et les biodéchets - Partie 1 : méthode de quantification par filtration sur membrane
NF X43-374:2006 Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method : non-dispersive infrared spectrometry.

British Standards Institution (BSI), Sludge Concentration Determination Method

BS 1747-2:1969 Methods for the measurement of air pollution - Determination of concentration of suspended matter
BS 1747-12:1993 Methods for measurement of air pollution. Determination of the mass concentration of ozone in ambient air: chemiluminescence method
BS EN 196-1:2005 Methods of testing cement - Determination of strength
BS EN 196-6:2010 Methods of testing cement - Determination of fineness
BS EN ISO 21258:2010 Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method - Non-dispersive infrared method
BS 1747-9:1987 Methods for measurement of air pollution. Determination of the mass concentration of nitrogen oxides in ambient air: chemiluminescence method
BS EN ISO 25140:2010 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
BS ISO 12141:2002 Stationary source emissions. Determination of mass concentration of particulate matter (dust) at low concentrations. Manual gravimetric method
BS EN 196-6:1992 Methods of testing cement - Determination of fineness
BS EN 196-6:2018 Tracked Changes. Methods of testing cement. Determination of fineness
BS EN 196-1:2016 Tracked Changes. Methods of testing cement. Determination of strength
BS EN ISO 21877:2019 Stationary source emissions. Determination of the mass concentration of ammonia. Manual method
BS PD CEN/TS 17638:2021 Stationary source emissions. Manual method for the determination of the mass concentration of formaldehyde. Reference method
BS EN 1093-8:1998+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 8: Pollutant concentration parameter, test bench method
BS EN 1093-8+A1:1999 Safety of machinery. Evaluation of the emission of airborne hazardous substances. Pollutant concentration parameter, test bench method
BS EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
BS EN ISO 25139:2011 Stationary source emissions. Manual method for the determination of the methane concentration using gas chromatography
BS EN 16339:2013 Ambient air. Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
BS EN ISO 22032:2009 Water quality. Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge. Method using extraction and gas chromatography/mass spectrometry
BS 6068-5.25:1999 Water quality. Biological methods. Determination of the inhibitory effect of water constituents on the growth of activated sludge microorganisms. Section 5.25 Determination of the inhibitory effect of water constituents on the growth of activated sludg...
BS 4522:1988 Method for determination of absolute density at 20 °C of liquid chemical products for industrial use
BS EN 17346:2020 Ambient air. Standard method for the determination of the concentration of ammonia using diffusive samplers
BS EN 14792:2005 Stationary source emissions - Determination of mass concentration of nitrogen oxides (NOx) - Reference method: Chemiluminescence
BS EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo(a)pyrene in ambient air
BS ISO 16236:2013 Crop protection equipment. Test method for the determination of drainable volume and its concentration
PD CEN/TS 17340:2020 Stationary source emissions. Determination of mass concentration of fluorinated compounds expressed as HF. Standard reference method
BS ISO 8573-8:2004 Compressed air - Test methods for solid particle content by mass concentration
19/30367217 DC BS EN 17346. Ambient Air Quality. Standard method for the determination of the concentration of ammonia by diffusive sampling

工业和信息化部, Sludge Concentration Determination Method

HG/T 5364-2018 Method for determination of copper content in copper-containing sludge
HG/T 5811-2020 Method for determination of iron content in iron-containing chemical sludge

国家煤炭工业局, Sludge Concentration Determination Method

MT/T 792-1998 Determination method of coal water slurry concentration

Korean Agency for Technology and Standards (KATS), Sludge Concentration Determination Method

KS I ISO 25139:2013 Stationary source emissions ― Manual method for the determination of the methane concentration using gas chromatography
KS L ISO 679:2006 Methods of testing cements－Determination of strength
KS D 0061-2005 Methods for measurement of dust concentration in welding environment
KS L ISO 679-2006(2016) Methods of testing cements－Determination of strength
KS L ISO 679-2006(2021) Methods of testing cements－Determination of strength
KS I ISO 25140:2012 Stationary source emissions－Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS I ISO 12141:2007 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
KS L 5104-2012 Testing method for tensile strength of hydraulic cement mortars
KS L 5104-1986 Testing method for tensile strength of hydraulic cement mortars
KS A 4513-2000 MEASURING METHODS OF B RADIOACTIVITY CONCENTRATION OF DRAIN WATER
KS A 4513-1985 MEASURING METHODS OF B RADIOACTIVITY CONCENTRATION OF DRAIN WATER
KS I ISO 21258:2012 Stationary source emissions-Determination of the mass concentration of dinitrogen monoxide(N2O)-Reference method:Non-dispersive infrared method
KS L 5105-2007 Testing method for compressive strength of hydraulic cement mortar
KS L 5105-1987 Testing method for compressive strength of hydraulic cement mortar
KS A 4513-1980(1995) MEASURING METHODS OF B RADIOACTIVITY CONCENTRATION OF DRAIN WATER
KS D 0078-2008 Test method for determination of impurity concentrations in silicon crystal by photoluminescence spectroscopy
KS I ISO 9698:2008 Water quality-Determination of tritium activity concentration-Liquid scintillation counting method
KS L 5106-1995 Testing method for fineness of portland cement by air permeability apparatus
KS I ISO 25139-2013(2018) Stationary source emissions ― Manual method for the determination of the methane concentration using gas chromatography
KS A ISO 14807:2006 Photography－Transmission and reflection densitometers－Method for determining performance
KS L 5112-2022 Test method for fineness of hydraulic cement by the 45 mm sieve
KS I ISO 25140-2012(2017) Stationary source emissions－Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS I ISO 7935:2006 Stationary source emissions－Determinationof the mass concentration of sulfur dioxide(Performance characteristics of automated measuring methods)
KS I ISO 25140:2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS I ISO 6768-2014(2019) Ambient air — Determination of mass concentration of nitrogen dioxide(Modified Griess-Saltzman method)
KS B ISO 7935:2009 Stationary source emissions－Determination of the mass concentration of sulfulr dioxide－Performance characteristics of automated measuring methods
KS I ISO 7935:2021 Stationary source emissions — Determination of the mass concentration of sulfur dioxide — Performance characteristics of automated measuring methods
KS B ISO 7935-2003(2008) Stationary source emissions－Determination of the mass concentration of sulfulr dioxide－Performance characteristics of automated measuring methods
KS I ISO 7935-2006(2016) Stationary source emissions－Determinationof the mass concentration of sulfur dioxide(Performance characteristics of automated measuring methods)
KS L 5106-2009(2019) Testing method for fineness of portland cement by air permeability apparatus
KS L 5112-2017 Standard testing method for fineness of hydraulic cement by the 45 m sieve
KS D 0078-2008(2018) Test method for determination of impurity concentrations in silicon crystal by photoluminescence spectroscopy

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Sludge Concentration Determination Method

GB/T 208-2014 Test method for determinging cement density
GB/T 208-1994 Standard test method for cement density
GB/T 6921-1986 Determination of the concentration of airborne particulate matters
GB/T 16425-1996 Dctermination for minimum explosive concentration of dust cloud
GB/T 2419-1994 Test method for fluidity of cement mortar
GB/T 2419-2005 Test method for fluidity of cement mortar
GB/T 3776.2-1983 Method of hydrogen ion concentration determination for pesticide emulsifiers
GB/T 18856.2-2008 Test methods for coal water mixture.Part 2:Determination of mass percentage of solid
GB/T 18856.2-2002 Test methods for quality of coal water mixture--Part 2: Determination of the solid load of coal water mixture
GB/T 9864-1988 Method for determination of silver in photographic films,papers,emulsions,fixing baths,effluents,sludges or residues
GB/T 9864-2008 Method for determination of silver in photographic films,papers,emulsions,fixing baths,effluents,sludges or residues
GB/T 20082-2006 Hydraulic fluid power-Fluid contamination-Determination of particulate contamination by the counting method using an optical microscope

Professional Standard - Traffic, Sludge Concentration Determination Method

JT/T 2014-1990 Method for Determination of Port Dust Concentration

国家煤矿安全监察局, Sludge Concentration Determination Method

MT 79-1984 Methods for determination of dust concentration and dispersion

Hebei Provincial Standard of the People's Republic of China, Sludge Concentration Determination Method

DB13/T 2375-2016 Gravimetric method for determination of low-concentration particulate matter in exhaust gas from stationary pollution sources
DB13/T 2589-2017 Infrared Spectrophotometric Method for Determination of Industrial Fume Concentration

ES-AENOR, Sludge Concentration Determination Method

UNE 80-122-1991 Methods of testing cement. Determination of fineness
UNE 80-101-1989
UNE 80-101-1991
UNE 80-108-1986
UNE 80-263-1987
UNE 80-116-1986
UNE 80-103-1986
UNE 80-104-1986
UNE 80-105-1986

SE-SIS, Sludge Concentration Determination Method

SIS SS 13 42 33-1989 Methods of testing cement — Determination of strength
SIS SS 13 42 22-1990 Methods of testing cement — Determination of fineness

未注明发布机构, Sludge Concentration Determination Method

NF P15-471-6*NF EN 196-6:2018 Methods of testing cement - Determination of fineness
DIN EN 196-1:1995 Methods of testing cement — Part 1: Determination of strength
DIN EN 14626:2005 Air quality — measuring method for determining the concentration of carbon monoxide using non-dispersive infrared photometry
DIN EN 13211 Ber-1:2005 Air quality — Emissions from stationary sources — Manual method for determining total mercury concentration
DIN EN 14211:2005 Air quality — measurement method for determining the concentration of nitrogen dioxide and nitrogen monoxide using chemiluminescence

International Organization for Standardization (ISO), Sludge Concentration Determination Method

ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
ISO 679:2009 Cement - Test methods - Determination of strength
ISO 679:1989 Methods of testing cements; determination of strength
ISO 12141:2002 Stationary source emissions - Determination of mass concentration of particulate matter (dust) at low concentrations - Manual gravimetric method
ISO 21877:2019 Stationary source emissions— Determination of the mass concentration of ammonia — Manual method
ISO 9096:1992 Stationary source emissions; determination of concentration and mass flow rate of particulate material in gas-carrying ducts; manual gravimetric method
ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography
ISO 9698:2010 Water quality - Determination of tritium activity concentration - Liquid scintillation counting method
ISO 21258:2010 Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method: Non-dispersive infrared method
ISO 7935:1992 Stationary source emissions; determination of the mass concentration of sulfur dioxide; performance characteristics of automated measuring methods
ISO 4407:2002 Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope
ISO 16236:2013 Crop protection equipment - Test method for the determination of drainable volume and its concentration

RU-GOST R, Sludge Concentration Determination Method

GOST 24701-2013 Peat. Methods for the determination of density
GOST 10650-2013 Peat. Methods for the determination of the disintegration degree
GOST 18165-1989 Drinking water. Method for determination of aluminium mass concentration
GOST 4152-1989 Drinking water. Method for determination of arsenic mass concentration
GOST 27753.4-1988 Greenhouse grounds. Method for determination of total salts content
GOST 28959-1991 Nitric acid for industrial use. Evaluation of the nitric acid concentration by measurement of density
GOST R 52391-2005 Wine production. Method for determination of citric acid mass concentration
GOST 25183.9-1982 Photographic gelatine. Method of determination of hydrogen ions concentration
GOST 13673-2013 Milling peat. Method for determination of bulk density
GOST 32113-2013 Alcoholic products and raw materials for their production. Enzymatic method for determination of citric acid mass fraction
GOST R 53954-2010 Wine production. Identification. Method of determining the mass concentration of ash and ash alkalinity
GOST 12787-1981 Methods for determination of spirit, actual extract and estimation of dry substances in the initial must
GOST R ISO 25139-2015 Stationary source emissions. Manual method for the determination of the methane concentration using gas chromatography
GOST R 56520-2015 Railway rolling stock. Methods for determination of explosive concentration of gases in storage boxes
GOST 29234.6-1991 Moulding sands. Methods for determination of water extract hydrodgen ions concentration (pH)
GOST 34749-2021 Alcoholic and non-alcoholic products. Method for the determination of the mass concentration of quinine
GOST R 51570-2000 Decontamination of territories. Method for determination of penetration depth of cesium-137 into the soil
GOST R 52968-2008 Ethanol from food raw material. Method for determination of mass concentration of dry residue
GOST 13005-1967 Interferometers for determination of liqnid and gas concentration. Methods and means for verification
GOST 310.3-1976 Cements. Methods of tests consistency, times of settining and of soundness
GOST R ISO 25140-2017 Stationary source emissions. Automatic method for the determination of the methane concentration using flame ionisation detection
GOST 31685-2012 Rectified ethanol from food raw material. Method for determination of mass concentration of dry residue
GOST 33587-2015 Activated carbon. Standard method for determination of adsorptive capacity for adsorbates at trace concentrations
GOST 25118-1982 Organic acid metallized (1:2) dyes. Determinations of concentration and shade

Standard Association of Australia （SAA）, Sludge Concentration Determination Method

AS 4215.1:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - Determination of fire extinguishing concentrations
AS 4215.2:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - Determination of fire inerting concentrations
AS 4215.0:1995 Methods of test for determining fire extinguishing and inerting concentrations for flammable liquids and gases - General introduction and list of methods
AS/NZS 1301.207s:2007 Methods of test for pulp and paper - Determination of stock concentration
AS 2891.9.3:2005 Methods of sampling and testing asphalt - Determination of bulk density of compacted asphalt - Mensuration method
AS 2891.7.1:2004 Methods of sampling and testing asphalt - Determination of maximum density of asphalt - Water displacement method
AS/NZS 2350.8:1999 Methods of testing portland and blended cement - Fineness index of portland cement by air permeability method
AS/NZS 2891.14.5:1999 Methods of sampling and testing asphalt - Field density tests - Density ratio of compacted asphalt
AS 2891.9.2:2005 Methods of sampling and testing asphalt - Determination of bulk density of compacted asphalt - Presaturation method
AS/NZS 2350.3:1999 Methods of testing portland and blended cements - Normal consistency of portland and blended cements
AS 2891.7.3:2005 Methods of sampling and testing asphalt - Determination of maximum density of asphalt - Methylated spirits displacement
AS 2891.9.1:2005 Methods of sampling and testing asphalt - Determination of bulk density of compacted asphalt - Waxing procedure
AS/NZS 1301.560:2016 Methods of test for pulp and paper, Method 560: Determination of the effective residual ink concentration (ERIC number) by infrared reflectance measurement

Qinghai Provincial Standard of the People's Republic of China, Sludge Concentration Determination Method

DB63/T 1873-2020 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Liaoning Provincial Standard of the People's Republic of China, Sludge Concentration Determination Method

DB21/T 3270-2020 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Shandong Provincial Standard of the People's Republic of China, Sludge Concentration Determination Method

DB37/T 3785-2019 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method
DB37/T 2537-2014 Gravimetric method for determination of low-concentration particulate matter in exhaust gas from stationary pollution sources in Shandong Province

Jiangxi Provincial Standard of the People's Republic of China, Sludge Concentration Determination Method

DB36/T 1386-2021 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Inner Mongolia Provincial Standard of the People's Republic of China, Sludge Concentration Determination Method

DB15/T 2362-2021 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method

Jilin Provincial Standard of the People's Republic of China, Sludge Concentration Determination Method

DB22/T 3426-2023 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method
DB22/T 1956-2013 Classification of Peat Decomposition Degree and Field Measurement Method
DB22/T 2245-2015 Determination method for assessing degree of humification of peat and organic soils

Group Standards of the People's Republic of China, Sludge Concentration Determination Method

T/XZFW 004-2023 Determination of low-concentration particulate matter in exhaust gas from stationary pollution sources β-ray method
T/GAIA 011-2021 Method for chemical analysis of industrial sludge -Determination of gold content
T/CCAS 012-2019 Determining cement density by gas displacement method
T/CSTM 00153-2020 Test method for strength retention rate of calcium aluminate cement

Association of German Mechanical Engineers, Sludge Concentration Determination Method

VDI 4301 Blatt 1-1997 Indoor air pollution measurement - Determination of the concentration of nitrogen dioxide - Manual photometric method (Saltzman)
VDI 2453 Blatt 1-1990 Gaseous air pollution measurement; determination of nitrogen dioxide concentration; photometric manual standard method (Saltzmann)
VDI 3484 Blatt 1-2001 Gaseous ambient air measurements - Indoor-air pollution measurements - Test gases measurements; Measurement of the formaldehyde concentration with the sulfite pararosaniline method

AT-ON, Sludge Concentration Determination Method

ONORM EN 196-6-1992 Methods of testing cement - Determination of fineness
ONR CEN/TS 17638-2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method (CEN/TS 17638:2021)
ONORM C 9435-3-1994 Testing of elastomers - Determination of resistance to ozone cracking - Determination of the concentration of ozone (Reference method)

RO-ASRO, Sludge Concentration Determination Method

STAS SR EN 196-6-1989 Methods of testing cement. Determination of finenesse
STAS SR 13355-3-1999 Beer. Analysis methods. Determination of alcoholic concentration
STAS 8170/2-1989 ORGANIC DYES Delivery concentration determination by comparative dyeings method

CZ-CSN, Sludge Concentration Determination Method

CSN EN 196-6-1993 Meethods of testing cement; Determination of fineness
CSN EN 196-1-1993 Methods of testing cement. Determination of strength
CSN 65 9022-1983 Reaktive dyestuffs. Method of concentration. and shade determinatlon.
CSN 65 9002-1987 Direct dyestuffs Method of dye concentration and shade determination
CSN 65 9220-1987 Sulphur dyestuffs. Method of dye concentration and shade determination
CSN EN 196-3-1993 Meethods of testing cement; Determination of setting time and soundness

Canadian General Standards Board （CGSB), Sludge Concentration Determination Method

CGSB 1-GP-71 METH 4.7-1974 Methods of Testing Paints and Pigments Consistency Consistency of Putty by Means of Gardner Mobilometer

PL-PKN, Sludge Concentration Determination Method

PN B04309-1973 Cement Methods of test etermination of whltnees gree
PN-EN 196-6-2019-01 P Methods of testing cement -- Part 6: Determination of fineness
PN C04403-06-1989 Pigments for water paints and mortars Tast methods Determination of fastness to cement
PN-EN 17346-2020-11 E Ambient air -- Standard method for the determination of the concentration of ammonia using diffusive samplers

NL-NEN, Sludge Concentration Determination Method

NEN-EN 196-6-1993 Methods of testing cement. Determination of fineness

American Society for Testing and Materials (ASTM), Sludge Concentration Determination Method

ASTM D2088-73 Method for Determination of Low Concentrations of Lead in Paint
ASTM D6331-14 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations &40;Manual Gravimetric Method&41;
ASTM D3977-97(2019) Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM D4913-00(2011) Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors
ASTM D4913-00(2016) Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors
ASTM D3977-97(2013)e1 Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM D4230-83(1996)e1 Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
ASTM D5210-92 Standard Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge
ASTM D4380-20 Standard Test Method for Determining Density of Construction Slurries
ASTM D4310-20 Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils
ASTM D4310-20a Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils
ASTM D6258-98(2003)e1 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
ASTM D6258-98e1 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
ASTM D6258-17 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
ASTM C115-10 Standard Test Method for Fineness of Portland Cement by the Turbidimeter
ASTM D789-18 Standard Test Method for Determination of Relative Viscosity of Concentrated Polyamide (PA) Solutions
ASTM D789-19 Standard Test Method for Determination of Relative Viscosity of Concentrated Polyamide (PA) Solutions
ASTM D7651-10 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
ASTM C115-96a(2003) Standard Test Method for Fineness of Portland Cement by the Turbidimeter
ASTM C115/C115M-10e1 Standard Test Method for Fineness of Portland Cement by the Turbidimeter
ASTM E1515-07 Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
ASTM D6258-09 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
ASTM D3624-85a(2005) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
ASTM D3718-85a(2005) Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
ASTM D3717-85a(2005) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
ASTM D3624-85a(2010) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
ASTM D3717-85a(2010) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
ASTM D3718-85a(2010) Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
ASTM C1625-19 Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry
ASTM D7979-15e1 Standard Test Method for Determination of Perfluorinated Compounds in Water, Sludge, Influent, Effluent and Wastewater by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
ASTM D7979-16 Standard Test Method for Determination of Perfluorinated Compounds in Water, Sludge, Influent, Effluent and Wastewater by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
ASTM D5271-93 Standard Test Method for Determining the Aerobic Biodegradation of Plastic Materials in an Activated-Sludge-Wastewater-Treatment System
ASTM D5271-02 Standard Test Method for Determining the Aerobic Biodegradation of Plastic Materials in an Activated-Sludge-Wastewater-Treatment System
ASTM F875-94(2003)e1 Standard Test Method for Evaluation of Large Area Density and Background on Office Copiers
ASTM F875-94(2003) Standard Test Method for Evaluation of Large Area Density and Background on Office Copiers
ASTM F875-94(2009) Standard Test Method for Evaluation of Large Area Density and Background on Office Copiers
ASTM F875-94(1998) Standard Test Method for Evaluation of Large Area Density and Background on Office Copiers
ASTM F875-09 Standard Test Method for Evaluation of Large Area Density and Background on Office Copiers
ASTM C1064/C1064M-01 Standard Test Method for Temperature of Freshly Mixed Portland Cement Concrete
ASTM C1064/C1064M-99 Standard Test Method for Temperature of Freshly Mixed Portland Cement Concrete
ASTM C1064/C1064M-05 Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
ASTM C1064/C1064M-03 Standard Test Method for Temperature of Freshly Mixed Portland Cement Concrete
ASTM E611-08(2015) Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography
ASTM D3718-85a(1999) Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
ASTM D3717-85a(1999) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
ASTM D3624-85a(1999) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
ASTM D3624-85a(2022) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
ASTM D3717-85a(2022) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
ASTM D3718-85A(2022)e1 Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
ASTM D3624-85a(2015) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
ASTM D3717-85a(2015) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
ASTM D3718-85a(2015) Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
ASTM D6071-96(2000) Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
ASTM D6071-96 Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
ASTM C1625-12 Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry
ASTM D6258-04 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
ASTM D6258-09(2014) Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
ASTM C1514-08 Standard Test Method for Measurement of ²³⁵U Fraction Using Enrichment Meter Principle
ASTM E2250-02 Standard Method for Determination of Endotoxin Concentration in Water Miscible Metal Working Fluids
ASTM D6007-02(2008) Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber

国家市场监督管理总局、中国国家标准化管理委员会, Sludge Concentration Determination Method

GB/T 16425-2018 Determination for minimum explosive concentration of dust clouds
GB/T 39421-2020 Methods for determining the static gel strength of cement formulations
GB/T 38301-2019 Determination of limiting oxygen concentration (LOC) of flammable gases and vapours
GB/T 36690-2018 Method of determination for 26 elements（copper，nickel，lead，zinc，cadmium，chrome etc.） content in the sludge from industrial waste liquid treatment

中华人民共和国国家卫生和计划生育委员会, Sludge Concentration Determination Method

WS/T 222-2002 Guideline for the measurement of catalytic concentration of clinical enzymes
GBZ/T 155-2002 Scintillation flask method for measuring radon concentration in the air
WS/T 349-2011 Reference method for determination of α-amylase catalytic activity concentration

VN-TCVN, Sludge Concentration Determination Method

TCVN 6016-2011 Cement.Test methods.Determination of strength
TCVN 4030-2003 Cement.Test method for determination of fineness
TCVN 5976-1995 Stationary source emission.Determination of the mass concentration of sulfur dioxide.Performance characteristics of automated measuring methods
TCVN 5975-2010 Stationary source emissions.Determination of the mass concentration of sulfur dioxide.Hydrogen peroxide/barium perchlorate/Thorin method
TCVN 7241-2003 Health care solid waste incinerators.Determination method of dusts concentration in fluegas
TCVN 5754-1993 Work place air.Methods for determination of mass concentration of toxic gases and vapours.General sampling methods
TCVN 7244-2003 Health care solid waste incinerators.Determination method of hydrochloric acid concentration (HCI) in fluegas

BE-NBN, Sludge Concentration Determination Method

NBN-EN 196-1-1991 Methods of testing cement - Determination of strength

KR-KS, Sludge Concentration Determination Method

KS L ISO 679-2022 Cement — Test methods — Determination of strength
KS I ISO 25140-2022 Stationary source emissions — Automatic method for the determination of the methane concentration using flame ionization detection(FID)
KS I ISO 7935-2021 Stationary source emissions — Determination of the mass concentration of sulfur dioxide — Performance characteristics of automated measuring methods

Hubei Provincial Standard of the People's Republic of China, Sludge Concentration Determination Method

DB42/T 1904-2022 Portable β-ray method for the determination of low-concentration particulate matter in exhaust gas from stationary pollution sources

Professional Standard - Agriculture, Sludge Concentration Determination Method

GB 3776.2-1983 Method for Determination of Hydrogen Ion Concentration of Pesticide Emulsifier

Military Standard of the People's Republic of China-General Armament Department, Sludge Concentration Determination Method

GJB 8342-2015 Method for determination of aerosol concentration and dispersion in field smoke screens
GJB 9254-2017 Determination method of mass concentration of neodymium element in neodymium phosphate glass ICP-AES method

ES-UNE, Sludge Concentration Determination Method

UNE-EN 196-6:2019 Methods of testing cement - Part 6: Determination of fineness
UNE-EN 196-1:2018 Methods of testing cement - Part 1: Determination of strength
UNE-CEN/TS 17638:2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method (Endorsed by Asociación Española de Normalización in August of 2021.)
UNE-EN ISO 21877:2020 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method (ISO 21877:2019)
UNE-EN 13211:2001/AC:2005 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
UNE 73340-1:2021 Procedure for the determination of environmental radioactivity. Analytical methods. Part 1: Determination of the activity concentration of thorium (Th) isotopes by alpha spectrometry.
UNE-EN 17346:2021 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers

IN-BIS, Sludge Concentration Determination Method

BELST, Sludge Concentration Determination Method

STB 2504-2017 Peat fuel briquettes. Method for determination of mechanical strength
STB 17.13.05-49-2021 Еnvironmental pгоtесtion аnd nature use. Sampling and measurements, monitoring. Water quality. Determination of the mass concentration of nitrogen-containing substances using photometric tests
STB 1931-2009 Wine production and wine raw material. Methods for determination a mass concentration of titrating acids

ZA-SANS, Sludge Concentration Determination Method

SANS 50196-6:1989 Methods of testing cement Part 6: Determination of fineness
SANS 50196-1:2006 Methods of testing cement Part 1: Determination of strength

Professional Standard - Electricity, Sludge Concentration Determination Method

DL/T 1884.3-2018 On-site pollution degree measurement and assessment part 3: Determination method of pollution components
DL/T 1884.4-2021 On-site pollution degree measurement and assessment part 4: test salt density correction method for natural pollution

IT-UNI, Sludge Concentration Determination Method

UNI CEN/TS 17638-2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method
UNI CEN/TS 17405-2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry

Lithuanian Standards Office , Sludge Concentration Determination Method

LST CEN/TS 17638-2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method
LST EN 196-1-2005 Methods of testing cement - Part 1: Determination of strength
LST EN 196-6-2010 Methods of testing cement - Part 6: Determination of fineness
LST EN 13211-2002 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
LST EN 13211-2002/AC-2005 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
LST EN 14789-2006 Stationary source emissions - Determination of volume concentration of oxygen (O2) - Reference method - Paramagnetism
LST CEN/TS 17405-2020 Stationary source emissions - Determination of the volume concentration of carbon dioxide - Reference method: infrared spectrometry
LST EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011)
LST EN ISO 22032:2009 Water quality - Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge - Method using extraction and gas chromatography/mass spectrometry (ISO 22032:2006)
LST ISO 7935:2001 Stationary source emissions. Determination of the mass concentration of sulfur dioxide. Performance characteristics of automated measuring methods
LST EN 14792-2006 Stationary source emissions - Determination of mass concentration of nitrogen oxides (NOx) - Reference method: Chemiluminescence

National Health Commission of the People's Republic of China, Sludge Concentration Determination Method

WST 349:2011 Reference method for determination of α-amylase catalytic activity concentration
WST 361:2011 Reference method for determination of catalytic activity concentration of lactate dehydrogenase

Danish Standards Foundation, Sludge Concentration Determination Method

DS/CEN/TS 17638:2021 Stationary source emissions – Manual method for the determination of the mass concentration of formaldehyde – Reference method
DS/EN 196-6:1994 Methods of testing cement-Part 6:Determination of fineness
DS/EN 196-1:2005 Methods of testing cement - Part 1: Determination of strength
DS/EN 196-6:2010 Methods of testing cement - Part 6: Determination of fineness
DS/EN 13211/AC:2005 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
DS/EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
DS/EN 16339:2013 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
DS/EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography
DS/EN 14789:2005 Stationary source emissions - Determination of volume concentration of oxygen (O2) - Reference method - Paramagnetism
DS 259:2004 Determination of metals in water, sludge and sediments - General guidelines for determination by atomic absorption spectrophotometry in flame
DS/EN ISO 25140:2010 Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID)
DS/ISO 16236:2013 Crop protection equipment - Test method for the determination of drainable volume and its concentration
DS/ISO 7935:1996 Stationary source emissions - Determination of the mass concentration of sulfur dioxide - Performance characteristics of automated measuring methods
DS/EN 14792:2006 Stationary source emissions - Determination of mass concentration of nitrogen oxides (NOx) - Reference method: Chemiluminescence
DS/EN ISO 21258:2010 Stationary source emissions - Determination of the mass concentration of dinitrogen monoxide (N2O) - Reference method: Non-dispersive infrared method

PT-IPQ, Sludge Concentration Determination Method

E 204-1967

水利部, Sludge Concentration Determination Method

SL 123-2012 Calibration method of cement mortar fluidity tester

AENOR, Sludge Concentration Determination Method

UNE 80108:2010 Test Methods of cement: Physical analysis. Fineness determination by wet sieving.
UNE-EN 196-6:2010 Methods of testing cement - Part 6: Determination of fineness
UNE-EN 196-1:2005 Methods of testing cement - Part 1: Determination of strength
UNE-EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury.
UNE-EN 16339:2014 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
UNE 80116:1986 TEST METHODS OF CEMENTS. PHYSICAL ANALYSIS. MECHANICAL STRENGTH DETERMINATION OF QUICKLY-SETTING NATURAL CEMENTS
UNE 80103:2013 Test methods of cements. Physical analysis. Actual density determination.
UNE-EN 14791:2017 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method
UNE-EN 14789:2017 Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism
UNE-EN ISO 25139:2011 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011)
UNE-EN ISO 22032:2009 Water quality - Determination of selected polybrominated diphenyl ethers in sediment and sewage sludge - Method using extraction and gas chromatography/mass spectrometry (ISO 22032:2006)
UNE 77222:1996 STATIONARY SOURCE EMISSIONS. DETERMINATION OF THE MASS CONCENTRATION OF SULFUR DIOXIDE. PERFORMANCE CHARACTERISTICS OF AUTOMATED MEASURING METHODS.
UNE 22335:1992 COAL DUST EXPLOSIBILITY. TEST METHOD FOR DETERMINING THE MINIMUM EXPLOSIVE CONCENTRATION IN THE HARTMANN TUBE.

Professional Standard - Nuclear Industry, Sludge Concentration Determination Method

EJ/T 20089-2014 Determination of Pu α activity in intermediate level radioactive liquid waste and its sludge.TiOA extraction α counting method

Professional Standard - Coal, Sludge Concentration Determination Method

MT/T 836-1999 Method of determining the minimum explosion concentration for methane and coal dust mixtures

Professional Standard - Hygiene , Sludge Concentration Determination Method

WS/T 361-2011 Reference procedure for the measurement of catalytic activity concentration of lactate dehydrogenase
WS/T 351-2011 Reference procedure for the measurement of catalytical activity concentration of alkaline phosphatase(ALP)
WS/T 417-2013 Reference procedure for the measurement of catalytic concentration of γ-Glutamyltransferase

US-FCR, Sludge Concentration Determination Method

FCR COE CRD-C 261-76-1968 HANDBOOK FOR CONCRETE AND CEMENT METHOD OF TEST TO DETERMINE WHETHER PORTLAND CEMENT IS CONTAMINATED WITH FLY ASH

American National Standards Institute （ANSI), Sludge Concentration Determination Method

ANSI/ASTM D5210:1992 Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewer Sludge (08.03)
ANSI/ASTM E2657:2011 Test Method for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids

Professional Standard - Petroleum, Sludge Concentration Determination Method

SY/T 0530-1993 Spectrophotometric method for the determination of oil content in oilfield sewage

SG-SPRING SG, Sludge Concentration Determination Method

SS 397 Pt.6-1997 METHODS OF TESTING CEMENT-PART 6:DETERMINA TION OF FINENESS AMENDMENT NO. 1
SS 397-6 AMD 1-1997 METHODS OF TESTING CEMENT - PART 6: DETERMINATION OF FINENESS AMENDMENT NO.1

CU-NC, Sludge Concentration Determination Method

NC 44-08-4-1986 Ores. Cobalt and Nickel Sulfide Concentrate. Photometric Deterraination of Copper. "Neocuproina" Method
NC 57-98-4-1986 Clinical Methods and Ais Photometric Determination of Thymol Turbidness in Human Serum. Chemical Analysis Method

Shaanxi Provincial Standard of the People's Republic of China, Sludge Concentration Determination Method

DB61/T 1294-2019 Determination of low-concentration sulfur dioxide in exhaust gas from stationary pollution sources Molecular sieve adsorption tube sampling-ion chromatography

GM North America, Sludge Concentration Determination Method

GM GM9156P-1989 Method for Determining the Soil Pick-Up and Cleanability of Vinyl Materials

中华人民共和国环境保护部, Sludge Concentration Determination Method

GB 6921-1986 Air quality-Determination of the concentration of airborne particulate matters

CEN - European Committee for Standardization, Sludge Concentration Determination Method

PREN 16720-2-2014 Characterization of sludges - Physical consistency - Part 2: Determination of solidity - Method by pocket vane shear apparatus
PREN 17346-2019 Ambient Air Quality - Standard method for the determination of the concentration of ammonia by diffusive sampling

Professional Standard - Meteorology, Sludge Concentration Determination Method

QX/T 67-2007 Determination of concentration of carbon dioxide in flask samples from background atmosphere.non-dispersive infrared absorption method

CH-SNV, Sludge Concentration Determination Method

SN EN 17346-2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers

The American Road & Transportation Builders Association, Sludge Concentration Determination Method

AASHTO T 271-1983 Standard Method of Test for Density of Plastic and Hardened Portland Cement Concrete In-Place by Nuclear Methods
AASHTO T 192-1999 Standard Method of Test for Fineness of Hydraulic Cement by the 45-muem (No. 325) Sieve
AASHTO T 153-2007 Standard Method of Test for Fineness of Hydraulic Cement by Air Permeability Apparatus

TH-TISI, Sludge Concentration Determination Method

TIS 15.5-1976 Standard for portland cement.part 5: method of test for fineness of portland cement by the turbidimeter
TIS 15.3-4-1976 Standard for portland cement.part 3: method of test for fineness of hydraulic cement by the 150 ?m and 75 ?m sieves.part 4: method of test for fineness of hydraulic cement by the 45 ?m sieve
TIS 15.6-1978 Portland cement.part 6: standard method of test for fineness of portland cement by air permeability apparatus

Professional Standard - Urban Construction, Sludge Concentration Determination Method

CJ 26.28-1991 Municipal sewage water quality inspection method standard Determination of total phosphorus spectrophotometric method