ZH
RU
ES

Plastic thread specification

Plastic thread specification, Total:499 items.

In the international standard classification, Plastic thread specification involves: Plastics, Screw threads, Pipeline components and pipelines, Bottles. Pots. Jars, Materials for the reinforcement of composites, Rubber and plastics products, Cutting tools, Construction materials, Fasteners, Fasteners for aerospace construction, Installations in buildings, Wastes, Welding, brazing and soldering, Lamps and related equipment, Linear and angular measurements, Machine tool systems, Sports equipment and facilities, Products of non-ferrous metals, Fluid power systems, Reinforced plastics, Aerospace electric equipment and systems, Cases. Boxes. Crates, Iron and steel products, Road engineering, Powder metallurgy, Surface treatment and coating, Cellular materials, Coatings and related processes used in aerospace industry, Fluid storage devices, Insulating materials, Electricity. Magnetism. Electrical and magnetic measurements, Kitchen equipment, Laboratory medicine, Barrels. Drums. Canisters, Mining equipment, External sewage systems, Products of the textile industry, Electrical accessories, Chipless working equipment, Valves, Tyres, Cans. Tins. Tubes, Electrical wires and cables, Hand-held tools.

American National Standards Institute （ANSI), Plastic thread specification

ANSI/ASTM D2464:2013 Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
ANSI/ASTM F437:2009 Specification For Threaded Chlorinated Poly Vinyl Chloride Cpvc Plastic Pipe Fittings, Schedule 80
ANSI/ASTM F437:2021 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
ANSI/ASTM F1498:2008 Specification for Taper Pipe Threads 60 Deg; for Thermoplastic Pipe and Fittings
ANSI/ASTM D2737a:2012 Specification for Polyethylene (PE) Plastic Tubing
ANSI/ASTM F2331:2011 Test Method For Determining Chemical Compatibility Of Thread Sealants With Thermoplastic Threaded Pipe And Fittings Materials
ANSI/ASME B1.3-2007 Screw Thread Gaging Systems for Dimensional Acceptability – Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)
ASME NM.3.1-2022 Nonmetallic Materials Part 1 - Thermoplastic Material Specifications
ANSI/ASTM F2768:2009 Specification For For Modified Stub Acme Thread Joint With Elastomeric Seal In Plastic Piping Components
ANSI/ASTM F409:2012 Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
ANSI/ASTM F442:2013 SPECIFICATION FOR CHLORINATED POLY(VINYL CHLORIDE) (CPVC) PLASTIC PIPE (SDR-PR)
ANSI/ASTM F1733a:2013 Specification for Butt Heat Fusion Polyamide (PA) Plastic Fitting for Polyamide (PA) Plastic Pipe and Tubing
ASME NM.3.2-2022 Nonmetallic Materials Part 2 - Reinforced Thermoset Plastic Material Specifications
ANSI/ASTM F2653:2016 Standard Specification for Paintball Valve Male Threaded Connection for Use with Approved Cylinders
ANSI A118.12-2008 Specifications for Crack Isolation Membranes for Thin-Set Ceramic Tile and Dimension Stone Installations
ANSI/ASTM F481:1996 Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields
ANSI/ASTM F714:2013 SPECIFICATION FOR POLYETHYLENE (PE) PLASTIC PIPE (DR-PR) BASED ON OUTSIDE DIAMETER
ANSI/ASTM F441:2013 SPECIFICATION FOR CHLORINATED POLY(VINYL CHLORIDE) (CPVC) PLASTIC PIPE, SCHEDULES 40 AND 80
ANSI A108.17-2005 Installation of Crack Isolation Membranes for Thin-set Tile and Dimension Stone

German Institute for Standardization, Plastic thread specification

DIN 6063-2:2011 Threads, mainly for plastic containers - Part 2: Trapezoidal screw threads, dimensions
DIN 6063-1:2011 Threads, mainly for plastic containers - Part 1: Buttress threads, dimensions
DIN 40431-2:1972-11 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Plug Gauges
DIN 40431-1:1970-11 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Ring Gauges
DIN 6063-2:2004 Threads, mainly for plastic containers - Part 2: Trapezoidal screw threads, dimensions
DIN 6063-1:2004 Screw threads used mainly for plastic containers - Part 1: Dimensions of buttress threads
DIN 6063-2:2011-04 Threads, mainly for plastic containers - Part 2: Trapezoidal screw threads, dimensions
DIN 6063-1:2011-04 Threads, mainly for plastic containers - Part 1: Buttress threads, dimensions
DIN 405-3:1997-11 General purpose knuckle threads - Part 3: Gauges for external and internal thread; types of gauges, profiles, tolerances
DIN 8140-3:2017-05 Wire thread inserts for ISO metric screw threads - Part 3: Gauges and gauge sizes
DIN 55525:1988-11 Preferred threads, for plastic and glass containers with unified screw cap; buttress thread; dimensions
DIN 55525:1988 Preferred threads, for plastic and glass containers with unified screw cap; buttress thread; dimensions
DIN 79012:2011 Screw threads for bicycles and mopeds - Theoretical values, limiting screw thread dimensions
DIN EN ISO 22068:2014-06 Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012); German version EN ISO 22068:2014
DIN 55427:1983 Packaging means; plastic crates; 12 bottle size
DIN 16903-4:1991 Insert nuts; heavy type for plastics mouldings and pressure die castings with dead hole
DIN 7868-1:1982-10 Rubber and plastics covered rollers; hardness specifications
DIN EN ISO 3994:2015-11 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2014); German version EN ISO 3994:2014
DIN EN 14867:2005-09 Packaging - Plastic freezer bags - Specifications and test methods; German version EN 14867:2005
DIN EN ISO 14526-1:2000-08 Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14526-1:1999); German version EN ISO 14526-1:1999
DIN EN ISO 15252-1:2000-08 Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 1: Designation system and basis for specifications (ISO 15252-1:1999); German version EN ISO 15252-1:1999
DIN 20316:2012 Rock drilling - Thread connections for thin-walled rotary drilling equipment - Dimensions, design
DIN ISO 724:2010 ISO general-purpose metric screw threads - Basic dimensions (ISO 724:1993 + Cor. 1:2009)
DIN 20317:2012 Rock drilling - Round thread connections for percussive drilling equipment - Dimensions, design
DIN EN ISO 24025-1:2020-08 Plastics - Sulfone polymer moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 24025-1:2020); German version EN ISO 24025-1:2020
DIN EN ISO 11363-1:2012 Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2010 + Cor. 2:2012); German version EN ISO 11363-1:2010 + AC:2012

American Society for Testing and Materials (ASTM), Plastic thread specification

ASTM F1498-08(2012)e1 Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings
ASTM D2464-13 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
ASTM D2464-15 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
ASTM F1498-00 Standard Specification for Taper Pipe Threads 60176 for Thermoplastic Pipe and Fittings
ASTM F1498-00e1 Standard Specification for Taper Pipe Threads 60176 for Thermoplastic Pipe and Fittings
ASTM F1498-08 Standard Specification for Taper Pipe Threads 60x00B0; for Thermoplastic Pipe and Fittings
ASTM C1526-08(2014) Standard Specification for Serpentine Dimension Stone
ASTM D2464-23 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
ASTM A66-07(2013) Standard Specification for Steel Screw Spikes
ASTM F1498-08(2020) Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings
ASTM C1526-08 Standard Specification for Serpentine Dimension Stone
ASTM D2464-99e1 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
ASTM D2464-99 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
ASTM D2464-06 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
ASTM F437-99 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
ASTM F437-21 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
ASTM F437-15 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
ASTM C1526-03 Standard Specification for Serpentine Dimension Stone
ASTM F437-06 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
ASTM D6394-11 Standard Specification for Sulfone Plastics (SP)
ASTM F1750-16 Standard Specification for Paintball Marker Threaded-Propellant Source Interface
ASTM B302-17 Standard Specification for Threadless Copper Pipe, Standard Sizes
ASTM A307-14e1 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
ASTM F437-09 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
ASTM B302-12 Standard Specification for Threadless Copper Pipe, Standard Sizes
ASTM F2482-08(2015) Standard Specification for Load-Indicating Externally Threaded Fasteners
ASTM D2609-21 Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
ASTM D2609-14 Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
ASTM D2609-15 Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
ASTM D2737-12 Standard Specification for Polyethylene (PE) Plastic Tubing
ASTM D2737-12e1 Standard Specification for Polyethylene (PE) Plastic Tubing
ASTM D4203-17 Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials
ASTM F3091/F3091M-14 Standard Specification for Powder Bed Fusion of Plastic Materials
ASTM F2331-04 Standard Test Method for Determining Chemical Compatibility of Thread Sealants with Thermoplastic Threaded Pipe and Fittings Materials
ASTM F2331-04e1 Standard Test Method for Determining Chemical Compatibility of Thread Sealants with Thermoplastic Threaded Pipe and Fittings Materials
ASTM A955/A955M-12e1 Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
ASTM A955/A955M-12 Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
ASTM F1750-11(2015) Standard Specification for Paintball Marker Threaded-Propellant Source Interface
ASTM A955/A955M-14 Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
ASTM A354-03a Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
ASTM A354-03 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
ASTM D2911-94 Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D2737-12a Standard Specification for Polyethylene (PE) Plastic Tubing
ASTM B532-85(2014) Standard Specification for Appearance of Electroplated Plastic Surfaces
ASTM D3350-14 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
ASTM D4819-13 Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics
ASTM A354-17e1 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
ASTM A354-11 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
ASTM A955/A955M-11e1 Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
ASTM A1035/A1035M-11 Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement
ASTM D2911-94(2001) Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D2911/D2911M-16 Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM C582-09 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
ASTM D4976-12 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
ASTM D4976-12a Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
ASTM D4976-12a(2020) Standard specifications for polyethylene plastic molding and extrusion materials
ASTM E934-94(1998) Standard Specification for Serological Pipet, Disposable Plastic
ASTM E934-94(2021) Standard Specification for Serological Pipet, Disposable Plastic
ASTM B883-15 Standard Specification for Metal Injection Molded (MIM) Materials
ASTM B883-17 Standard Specification for Metal Injection Molded (MIM) Materials
ASTM D2749-13 Standard Symbols for Dimensions of Plastic Pipe Fittings
ASTM D5419-95 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures
ASTM D5419-09 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures
ASTM D5419-21 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures
ASTM D5419-95(2003) Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures
ASTM D5419-14a Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures
ASTM D5419-14 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures
ASTM D3350-12 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
ASTM D3350-12e1 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
ASTM F2768-09 Standard Specification for Modified Stub ACME Thread Joint with Elastomeric Seal in Plastic Piping Components
ASTM E934-94(2015) Standard Specification for Serological Pipet, Disposable Plastic
ASTM D4101-14e1 Standard Specification for Polypropylene Injection and Extrusion Materials
ASTM F2653-07 Standard Specification for Paintball Valve Male Threaded Connection for Use with Approved Cylinders
ASTM E1844-08(2015) Standard Specification for A Size 10&x2009;&xd7;&x2009;4&x2013;5 Smooth-Tread Friction Test Tire
ASTM F2653-16 Standard Specification for Paintball Valve Male Threaded Connection for Use with Approved Cylinders
ASTM F2653-16(2020) Standard Specification for Paintball Valve Male Threaded Connection for Use with Approved Cylinders
ASTM D1248-12 Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
ASTM F1750-96 Standard Specification for Paintball Gun Threaded-Propellant Source Interface
ASTM D3006-99(2004) Standard Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape
ASTM D3006-10 Standard Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape
ASTM D3006-99 Standard Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape
ASTM D2301-10(2017) Standard Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
ASTM D2466-13 Standard Specification for Polylpar;Vinyl Chloriderpar; lpar;PVCrpar; Plastic Pipe Fittings, Schedule 40
ASTM D3841-16 Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels
ASTM C1081-98(2014) Standard Specification for Asbestos-Cement Corrugated Fill For Use in Cooling Towers
ASTM F2329/F2329M-15 Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners

US-FCR, Plastic thread specification

FCR FED PCDT 1-1972 PLASTIC CORRUGATED DRAINAGE TUBING, TENTATIVE SPECIFICATIONS FOR

(U.S.) Ford Automotive Standards, Plastic thread specification

FORD WD313-2015 THREAD FORMING SCREWS FOR PLASTIC - THROUGH HARDENED REMFORM II “HS” AND DELTA PT PAN COLLAR HEAD CATEGORY 080.035
FORD WD 312-2015 THREAD FORMING SCREWS FOR PLASTIC - THROUGH HARDENED REMFORM II “HS” AND DELTA PT HEXAGON COLLAR HEAD CATEGORY 070.025
FORD WD310-2004 THREAD FORMING SCREWS FOR PLASTIC - THROUGH HARDENED PT(R) HEXAGON COLLAR HEAD
FORD WE503-2001 HEXAGON FLANGED WELD NUTS PLASTIC INSERT PC 8 - THREAD CLASS 6H
FORD WD311-2004 THREAD FORMING SCREWS FOR PLASTIC - THROUGH HARDENED PT(R) PAN COLLAR HEAD, 6 LOBE
FORD WD312-2007 THREAD FORMING SCREWS FOR PLASTIC THROUGH HARDENED DELTA PT HEXAGON COLLAR HEAD CATEGORY 070.025
FORD WD313-2003 THREAD FORMING SCREWS FOR PLASTIC THROUGH HARDENED DELTA PT PAN COLLAR HEAD CATEGORY 080.035
FORD WD315-2015 THREAD FORMING SCREWS FOR PLASTIC - THROUGH HARDENED REMFORM, REMFORM II AND PT FASTENERS PAN COLLAR HEAD CATEGORY 080.035
FORD WD 314-2012 THREAD FORMING SCREWS FOR PLASTIC - THROUGH HARDENED REMFORM AND PT FASTENERS HEXAGON COLLAR HEAD CATEGORY 070.025
FORD WD314-2015 THREAD FORMING SCREWS FOR PLASTIC - THROUGH HARDENED REMFORM, REMFORM II AND PT FASTENERS HEXAGON COLLAR HEAD CATEGORY 070.025
FORD WD 315-2009 THREAD FORMING SCREWS FOR PLASTIC - THROUGH HARDENED REMFORM AND PT FASTENERS PAN COLLAR HEAD
FORD WD 314-2009 THREAD FORMING SCREWS FOR PLASTIC - THROUGH HARDENED REMFORM AND PT FASTENERS HEXAGON COLLAR HEAD

British Standards Institution (BSI), Plastic thread specification

BS 5789:1979 Specification for screw thread finishes for plastics containers
BS ISO 20058:2017 General purpose rubber thread. Specification
BS 949-3:1993 Screwing taps - Specification for pipe thread taps
BS SP 114:1955+A5:2013 Specification for eye bolts (unified threads) for aircraft
BS EN ISO 3994:2011 Plastics hoses. Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials. Specification
BS EN ISO 3994:2014 Plastics hoses. Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials Specification
BS ISO 725:2009 ISO inch screw threads - Basic dimensions
BS 7752-2:1994 Free running type wire thread inserts - Specification for ISO metric fine pitch threads
BS 4A 113:1999+A1:2012 Specification for cadmium-plated, mushroom-headed, unified-thread, slotted drive, bolts
BS 1254:1981 Specification for WC seats (plastics)
BS 2A 173:1962 Specification for 100 ° countersunk head steel bolts (Unified threads) for aircraft
BS 4A 170:1999+A1:2012 Specification for aluminium alloy, mushroom-headed, slotted drive, bolts (unified thread)
BS EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Dimensions, tolerances and designation
BS EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads. Part 1: Taper external threads and parallel internal threads. Dimensions, tolerances and designation
BS EN 10226-1:2004(2010) Pipe threads where pressure tight joints are made on the threads. Part 1: Taper external threads and parallel internal threads. Dimensions, tolerances and designation
19/30388662 DC BS ISO 20819. Plastics. Wood-plastic recycled composites (WPRC). Specification
BS 2A 175:1962 Specification for 100 ° countersunk head aluminium alloy bolts (Unified threads) for aircraft
BS 2A 173:1962+A7:2012 Specification for 100° Countersunk head steel bolts (Unified threads), cadmium plated, for aircraft
BS 2A 174:1962 Specification for 100 ° countersunk head corrosion-resisting steel bolts (Unified threads) for aircraft
BS EN ISO 22068:2014 Sintered-metal injection-moulded materials. Specifications
BS ISO 8605:2001 Textile-glass-reinforced plastics - Sheet moulding compound (SMC) - Basis for specification
BS ISO 20819-1:2020 Tracked Changes. Plastics. Wood-plastic recycled composites (WPRC). Specification
BS 4A 102:2002+A2:2012 Specification for steel bolts (Unified hexagons and Unified threads) for aircraft
BS EN ISO 20028-1:2017 Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 7792-1:2012 Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 17855-1:2014 Plastics. Polyethylene (PE) moulding and extrusion materials. Designation system and basis for specifications
BS EN 2943:2019 Aerospace series. Inserts, MJ and M screw threads, helical coil. Technical specification
15/30331960 DC BS EN 2943. Aerospace series. Inserts, screw thread, helical coil. Technical specification
12/30266874 DC BS EN 1871. Road marking materials. Paint, thermoplastic and cold plastic materials. Specifications
BS ISO 22068:2012 Sintered-metal injection-moulded materials. Specifications
BS ISO 21844:2018 Cellular plastic. Cellulose foam thermal insulation. Material specification
BS EN ISO 1874-1:2010 Plastics. Polyamide (PA) moulding and extrusion materials. Designation system and basis for specification
14/30300809 DC BS EN 2943. Aerospace series. Inserts, screw thread, helical coil, self-locking. Technical specification
BS ISO 19712-1:2009 Plastics. Decorative solid surfacing materials. Classification and specifications
BS EN 60674-2:1990 Specification for plastic films for electrical purposes. Methods of test
BS EN 60674-2:2017 Specification for plastic films for electrical purposes. Methods of test
BS EN ISO 24023-1:2020 Plastics. Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Designation system and basis for specifications
22/30453793 DC BS EN 2943. Aerospace series. Inserts, MJ and M screw threads, helical coil. Technical specification
18/30377545 DC BS EN 2943. Aerospace series. Inserts, MJ and M screw threads, helical coil, Technical specification
BS EN 3299:2019 Aerospace series. Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated. Technical specification
BS EN ISO 24025-1:2020 Plastics. Sulfone polymer moulding and extrusion materials - Designation system and basis for specifications
BS EN ISO 24022-1:2020 Plastics. Polystyrene (PS) moulding and extrusion materials - Designation system and basis for specifications
BS EN ISO 20558-1:2019 Plastics. Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Designation system and basis for specifications
BS EN 12713:2000 Screw cap closure systems for plastics containers with a nominal capacity of 20 L to 60 L
BS A 401-420:2015 Specification for screws, pan and 100 countersunk head, hexalobular drive recess (unified threads below $9D inch) in various materials
BS ISO 6123-2:2015 Rubber or plastics covered rollers. Specifications. Surface characteristics
BS ISO 4898:2018 Rigid cellular plastics. Thermal insulation products for buildings. Specifications
BS EN ISO 16396-1:2015 Plastics. Polyamide (PA) moulding and extrusion materials. Designation system, marking of products and basis for specifications
BS EN ISO 11363-1:2018+A1:2023 Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders - Specifications
BS ISO 16365-1:2014 Plastics. Thermoplastic polyurethanes for moulding and extrusion. Designation system and basis for specifications
BS EN ISO 1923:1995 Cellular plastics and rubbers - Determination of linear dimensions
BS EN 13045:2009 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances

CZ-CSN, Plastic thread specification

CSN ON 22 8708-1966
CSN 25 4011-1973 Limit screw gauges ISO for metric hread. Basic regulations
CSN 13 7712-1959
CSN 19 6012-1955
CSN 25 4015 Za-1987
CSN ON 54 7852-1964
CSN 64 0011-1967 Technical specifications for lastics products
CSN 02 1005 Cast.5-1984 Bolts, serews and nuts - technical spe-cif ícations. Set serews and similar thread-ed fasteners not under tensile stresses
CSN ST SEV 182-1975

Professional Standard - Automobile, Plastic thread specification

QC/T 713-2004 Tapping screws thread for plastic(nylon)

PL-PKN, Plastic thread specification

PN G53031-1969 Gauges for casing ?hread
PN G53040-1966 Core drilling Gauges for line-pipe threads
PN M53395-1988 Mcusurint: instruments Sc rew pitcli tiauges lor metrie thrcads
PN M73125-1972 Hydraulic drive and control equip- ment Threaded pipe connections Specification
PN O79834-03-1987 Piastics transport packages Cases cells Specifications
PN B75704-01-1986 Toilet seats of thermoplastics General specification and methods of test
PN P50555-1992 Wall coverings in roll form. Specification for finished wallpapers, wall vinyls and plastics wallcoverings
PN C89104-01-1992 Plastics Symbols General regulations and scope of the standard
PN O79834-01-1987 Plastics transport packages Cases cells General regulations
PN O79835-03-1987 Plastics transport packages Cases without cells Specifications

未注明发布机构, Plastic thread specification

BS 811:1950(1999) Specification Cycle threads
DIN EN ISO 7792-1:2004 Plastics – Thermoplastic polyester (TP) molding compounds – Part 1: Designation system and basis for specifications
BS EN ISO 28941-1:2008(2015) Plastics — Poly (phenylene ether) (PPE) moulding and extrusion materials Part 1 : Designation system and basis for specifications
BS EN ISO 1873-1:1995(2000) Plastics — Polypropylene (PP) mouldingandextrusion materials — Part 1 : Designation systemand basis for specifications
BS EN ISO 25137-1:2017 Plastics — Sulfone polymer moulding and extrusion materials Part 1 : Designation system and basis for specifications
ISO 28491-1:2008 Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 1: Designation system and basis for specifications

AIA/NAS - Aerospace Industries Association of America Inc., Plastic thread specification

NAS258-1947 Elbow - 90 Degree@ Female Screw Thread Plastic Tee-Female Screw Thread Cross- Female Screw Thread (Rev 2)
NAS264-1947 Elbow - 45 Degree Female Straight Threads Plastic (Rev 2)
NAS276-1947 Plug - Pipe Thread Plastic (Rev 2)
NAS251-1947 Nipple - Pipe Thread & Hose Plastic (Rev 2)
NAS275-1947 Plug & Bleeder - Screw Thread Plastic (Rev 2)
NAS270-1947 Tee - Hose Run Pipe Thread Side Plastic (Rev 2)
NAS245-1947 Nipple - Flared Tube & Pipe Thread Plastic (Rev 2)
NAS273-1947 Cross - Hose Pipe Thread Bottom Plastic (Rev 2)
NAS256-1947 Elbow-Hose & Pipe Thread@ 90 Degree@ Plastic (Rev 2)
NAS262-1947 Elbow - 45 Degree Pipe Thread & Hose Plastic (Rev 2)
NAS259-1947 Elbow - 45 Degree Flared Tube & Pipe Thread Plastic (Rev 2)
NAS253-1947 Elbow - 90 Degree Flared Tube & Pipe Thread@ Plastic (Rev 2)
NAS267-1947 Tee - Flared Tube Run Pipe Thread Side Plastic (Rev 2)
NAS269-1947 Tee - Pipe Thread & Hose Run & Side Plastic (Rev 2)
NAS268-1947 Tee - Pipe Thread & Flared Tube Run & Side Plastic (Rev 2)
NAS1838-2013 INSERTS@ SCREW THREAD@ METALLIC@ KEYRING LOCKED@ SPECIFICATION FOR (Rev 2)
NASM85353-2012 NUTS@ FASTENERS@ INTERNALLY THREADED@ PRELOAD LOCKING@ 450 °F@ 800 °F AND 1@200 °F@ GENERAL SPECIFICATION FOR (Rev 1)

VN-TCVN, Plastic thread specification

TCVN 4628-1988 Metric screw thread for the parts from plastics

SE-SIS, Plastic thread specification

SIS SS 3357-1980 Screw threads -Asymmetrical trapezoidal screw threads of plastic material - Basic dimensions and screw thread tolerances - Metric series
SIS SEN 24 10 21-1962 Conduit pipe threads. Gaugcs
SIS 84 50 02-1970 GL screw threads for plastic closures for glass containers
SIS SS IEC 674:1983 Specification for plastic film for electrical purposes

AT-ON, Plastic thread specification

ONORM M 5251-1965 Die Schlüsselweiten der Hutmuttern entsprechen der ISO-Empfehlung R 272. Bis zum 31. 12. 1965 dürfen die Hutmuttern M 8 und M 8X. 1 noch mit der Schlüsselweite s = 14 mm geliefert werden.
ONORM M 4865-1989 Bonded abrasive products; threaded abrasive products for portable grinding machines; marking of confortnity

Aerospace Industries Association, Plastic thread specification

AIA NAS 258-1947 (Inactive)Elbow - 90 Degree, Female Screw Thread Plastic Tee-Female Screw Thread Cross- Female Screw Thread (Rev. 2)
AIA NAS 264-1947 (Inactive)Elbow - 45 Degree Female Straight Threads Plastic (Rev. 2)
AIA NAS 276-1947 (Inactive)Plug - Pipe Thread Plastic (Rev. 2)
AIA NAS 251-1947 (Inactive)Nipple - Pipe Thread & Hose Plastic (Rev. 2)
AIA NAS 270-1947 (Inactive)Tee - Hose Run Pipe Thread Side Plastic (Rev. 2)
AIA NAS 275-1947 (Inactive)Plug & Bleeder - Screw Thread Plastic (Rev. 2)
AIA NAS 245-1947 (Inactive)Nipple - Flared Tube & Pipe Thread Plastic (Rev. 2)
AIA NAS 273-1947 (Inactive)Cross - Hose Pipe Thread Bottom Plastic (Rev. 2)
AIA NAS 256-1947 (Inactive)Elbow-Hose & Pipe Thread, 90 Degree, Plastic (Rev. 2)
AIA NAS 262-1947 (Inactive)Elbow - 45 Degree Pipe Thread & Hose Plastic (Rev. 2)
AIA NAS 1838-1982 Inserts, Screw Thread - Metallic, Keyring Locked, Specification for (Rev. 1)
AIA NAS 253-1947 (Inactive)Elbow - 90 Degree Flared Tube & Pipe Thread, Plastic (Rev. 2)
AIA NAS 259-1947 (Inactive)Elbow - 45 Degree Flared Tube & Pipe Thread Plastic (Rev. 2)
AIA NAS 267-1947 (Inactive)Tee - Flared Tube Run Pipe Thread Side Plastic (Rev. 2)
AIA NAS 268-1947 (Inactive)Tee - Pipe Thread & Flared Tube Run & Side Plastic (Rev. 2)
AIA NAS 269-1947 (Inactive)Tee - Pipe Thread & Hose Run & Side Plastic (Rev. 2)

FI-SFS, Plastic thread specification

SFS C.5.14-1953 Panssariputkikierteet Mutterikierteiden tulkit
SFS C.5.13-1953 Panssariputkikierteet Ruuvikierteidentulkit

RO-ASRO, Plastic thread specification

STAS 7456/2-1984 GAUGES AND REFERENCE GAUGES FOR METRIC TAPERED SCREW THREAD Dimensions
STAS 9740-1974 THREADl MILLING AND HOBBING MACHINES Accuracy specifications
STAS 6572/1-1979 Plastics THERMOPLASTICS SPECIMENS MOULDING BY INJECTION General specifications
STAS 6572/2-1979 Plastics THERMOPLASTICS SPECIMENS MOULDING BY COMPRESSION General specifications
STAS 7456/1-1983 GAUGES AND REFERENCE GAUGES FOR METRIC TAPERED SCREW THREAD Manufacturing and wear tolerances
STAS SR ISO 7689:1996 Aerospace - Alloy steel bolts with strength classification 1100 MPa and MJ threads - Procurement specification
STAS 2700/9-1978 THEADED FASTENERS General requirements Mechanical properties and methods of test for seif locking nuts, with plastic ring

RU-GOST R, Plastic thread specification

GOST 11709-1981 Metric screw threads in the range 1-180 mm diameters for the parts in plastics. Profile, basic dimensions and tolerances
GOST 10727-2015 Unidirectional glass threads. Specifications
GOST 5689-1979 Phenolic moulding compound. Specifications
GOST 13448-1982 Plastic ventilating grills. Specifications
GOST 2746.1-1988 Plastic Edison screw lampholders. Specifications
GOST 17759-1972 Threaded plug-gauges with full form of thread of diameters from 52 to 100 mm. Design and basic dimensions
GOST 17761-1972 Threaded plug-gauges with full of thread of diameter from 105 to 300 mm. Design and basic dimensions
GOST 17763-1972 Threaded plug-gauges with full form of thread of diameters from 1 to 100 mm. Design and basic dimensions
GOST 17765-1972 Threaded ring-gauges with full-form of thread of diameters from 105 to 300 mm. Design and basic dimensions
GOST 9590-1976 Laminated paper decorative plastic. Specifications
GOST 7883-1982 Plastic accumulator cases. Specifications
GOST 12466-1967 Shackles with thread holes. Design and sizes
GOST 11650-1980 Self-tapping round-head and sharpening end screws for metals and plastics. Design and dimensions
GOST 17756-1972 Threaded plug-gauges with inserts with full-form of thread of diameters from 1 to 100 mm. Design and basic dimensions
GOST 17760-1972 Threaded plug-gauges with incomplete form of thread of diameters from 52 to 100 mm. Design and basic dimensions
GOST 17764-1972 Threaded ring-gauges with incomplete form of thread of diameters from 2 to 100 mm. Design and basic dimensions
GOST 17766-1972 Threaded ring-gauges with incomplete form of thread of diameters from 105 to 300 mm. Design and basic dimensions
GOST 17757-1972 Threaded plug-gauges with inserts with incomplete form of thread of diameters from 1 to 100 mm. Design and basic dimensions
GOST 15948-1976 Thread-forming pieces for moulding metric thread in plastic articles. Size calculation
GOST 6211-1981 Conical pipe thread. Profile, basic dimensions and tolerances
GOST 8958-1975 Ductile iron fittings with parallel thread for pipelines. Double nipples. Basic dimensions
GOST 8967-1975 Pipe steel connections with cylindrical thread for pipelines P = 1,6 MPa. Nippels. Basic dimensions
GOST 10362-2017 Pressure rubber hoses with thread reinforcement without end fittings. Specifications
GOST 13969-1974 Screwed unions for tube connections on external cone. Construction and dimensions
GOST 15976-1981 Perforated and perforated-corrugated vinyl plastic film. Specifications
GOST 25452-2017 High-pressure rubber hoses with spiral wire reinforcement without end fittings. Specifications
PNST 36-2015 Nanomodified thermoplastical carbon composite. Specifications
GOST 8961-1975 Ductile iron fittings with parallel thread for pipelines. Locknuts. Basic dimensions
GOST 8959-1975 Ductile iron fittings with parallel thread for pipelines. Connection nuts. Basic dimensions
GOST 32972-2014 Plastic manholes for sewerage and drainage systems. Specifications
GOST R 56730-2015 Plastic flexible pipes with thermal insulation for district heating. General specifications
GOST R 57514-2017 Rubber- or plastics-coated fabrics for water-resistant clothing. Specification
GOST 16070-1970 Unions screwed for rubber packer for tube connections on internal cone. Construction and dimensions
GOST 16717-1971 Shouldered and threaded shanks for dies of sheet pressing. Construction and dimensions
GOST 10618-1980 Self-tapping screws for metals and plastics. General specifications
GOST 17387-1972 Guide bushings of plastics moulds and die casting dies. Construction and dimensions
GOST 6436-1975 PE-insulated plastic-sheathed block-signalling cables. Specifications
GOST 378-1976 Asbestos-cement corrugated sheets of ordinary prfile and details for them
GOST R 51254-1999 Assembly tools for stanlardized tightening of threaded connections. Torque wrenches. Basic specifications
GOST 16073-1970 Screwed union elbows with slope angle 135° for tube connections on internal cone. Construction and dimensions
GOST 16226-1981 End double-tooth mill thereaded shank for machining light alloys. Design and dimensions

Professional Standard - Electron, Plastic thread specification

SJ/T 10519.14-1994 Components of injection mould for plastics.Ejector pins with thread
SJ/Z 9055-1987 Paper or Plastic Printing Ribbons - Core Specifications

BELST, Plastic thread specification

STB 1148-99 Screws with special buttress thread. Specifications
STB 1264-2001 Plastic profiles for windows and doors. Specifications
STB 1240-2000 Roll fiberglass plastic. Specifications
STB 1103-98 Glass fiber plastic reinforcement. Specifications
STB 1267-2001 Sealants of polyvinylchloride plastic. Specifications
STB 1156-99 Furniture made of plastics. General specifications
STB 951-94 Plastic and metal toys. General specifications
STB 2152-2010 Tapers thread sockets for mechanical coupling of reinforcement. Specifications
STB 1064-97 Floor tiles from thermoplastic material. Composites. Specifications
STB 1015-97 Household and consumer products made of plastics. General specifications
STB 1065-97 Roof tile from thermoplastic material composites. Specifications

Association Francaise de Normalisation, Plastic thread specification

NF H35-066:1990 Bottling industry. Plastic screw finishes, diameter 28 and 31 - 1 thread for sparkling drinks. Dimensions.
NF T51-800:2015 Plastiques - Spécifications pour les plastiques aptes au compostage domestique
NF H35-067:1990 Bottling industry. Plastic screw finish, 1 thread, diameter 28 for sparkling drinks with outlet gaps. Dimensions.
NF H35-065:1990 Bottling industrie. Plastic screw finish for flat products.
NF H35-036:1984 Bottling industry. Plastic screw finish. Parfumery type. Dimensions.
NF EN ISO 3994:2014 Tuyaux en plastiques - Tuyaux thermoplastiques à renforcement thermoplastique en spirale pour aspiration et refoulement de matières aqueuses - Spécifications
NF E49-051:1973 Coupling for pneumatic transmissions. Screwed couplings-metal and plastic pipes.
NF ISO 8830:1993 Tarauds à machine, en acier rapide, à filets rectifiés - Spécifications techniques.
NF EN 3899:2005 Série aérospatiale - Douilles filetées, à paroi renforcée, à freinage interne, à filetage MJ, en acier résistant à chaud FE-PM3801 (17-4PH) - Spécification technique
NF A95-770*NF EN ISO 22068:2014 Sintered-metal injection-moulded materials - Specifications
NF EN ISO 6224:2011 Tuyaux en matières thermoplastiques à armature textile d'usage général pour l'eau - Spécifications
NF T54-086:1990 Plastiques - Tubes et raccords en polychlorure de vinyle non plastifié (PVC-U) pour les réseaux d'irrigation enterrés - Spécifications.
NF EN 3297:1998 Série aérospatiale - Douilles filetées, à paroi mince, à freinage interne, à filetage MJ, en alliage résistant à chaud à base de nickel NI-P100HT (Inconel 718) - Spécification technique
NF T54-801:1992 Plastiques - Plateaux pour libre service - Spécifications et méthodes d'essai.
NF EN ISO 15252-1:2000 Plastiques - Poudres à mouler à base d'époxydes (EP-PMC) - Partie 1 : système de désignation et base de spécification
NF EN ISO 14526-1:2000 Plastiques - Poudres à mouler phénoliques (PF-PMC) - Partie 1 : système de désignation et base de spécification
NF EN 3299:2019 Série aérospatiale - Écrous d'arbres et bagues filetées, à freinage interne, filetage MJ à droite ou à gauche, en acier résistant à chaud FE-PA2601 (A286), argentés - Spécification technique
NF T50-005-1:2013 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 1: designation system and basis for specifications
NF T50-700:2014 Plastics - Rotomoulding - Characterisation of polyolefins for rotomoulding and general specifications of rotomoulded parts
NF T50-001-1:2011 Plastics - Polyamide (PA) moulding and extrusion materials - Part 1 : designation system and basis for specification.
NF T54-029:1981 Plastiques - Raccords moulés en polychlorure de vinyle non plastifié - Série pression - Spécifications
NF EN 14867:2005 Emballages - Sacs plastiques pour congélation - Spécifications et méthodes d'essai
NF EN 13706-1:2003 Composites en plastiques renforcés - Spécification pour les profilés pultrudés - Partie 1 : désignation
NF EN ISO 22068:2014 Matériaux métalliques frittés pour moulage par injection - Spécifications
NF EN ISO 14530-1:2000 Plastiques - Poudres à mouler à base de polyester non saturé (UP-PMC) - Partie 1 : système de désignation et base de spécification
NF T53-040-1*NF EN ISO 21970-1:2019 Plastics - Polyketone (PK) moulding and extrusion materials - Part 1 : designation system and basis for specifications
NF H34-051*NF EN 13045:2009 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
NF EN ISO 8029:2014 Tuyaux plastiques - Tuyaux d'eau écrasables d'usage général renforcés textiles - Spécifications
NF T53-003-1*NF EN ISO 24023-1:2020 Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 1 : designation system and basis for specifications

IN-BIS, Plastic thread specification

IS 10073-1982
IS 8801-1978
IS 9387 Pt.2-1979
IS 4372-1967
IS 9392-1980
IS 13713-1993 Plastic chairs for general office purposes. Specification
IS 13664-1993 Poly-pallets for bag storage godowns. Specification

CU-NC, Plastic thread specification

NC 30-47-1986 Plastica. Industrial Plastic Helmets. Quality Specifications
NC 30-42-1985 Plastics PVC Boots Quality Specifications
NC 30-40-1985 Plastics. Sport Glasses Quality Specifications
NC 30-38-1985 Piastics. Rigid PVC Pipes Quality Specifications
NC 09-207-1985 Material Forming. Screw Presses, Accuracy Control Methods
NC 30-58-1986 Plastics. Safety Glasses Panoramic Model. Quality Specifications
NC 30-67-1987 Plastics Industry. Findings for Furniture General Quality Specifications
NC 98-16-1987 Non-Electrical Household Equipment. Plástic Brush for Brooms Ouality Specifications

International Organization for Standardization (ISO), Plastic thread specification

ISO 17088:2021 Specifications for compostable plastics
ISO 17088:2012 Specifications for compostable plastics
ISO 7180:1986 Pneumatic fluid power; Cylinders; Bore and port thread sizes
ISO 7792-1:2012 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 20028-1:2017 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 4898:2018 Rigid cellular plastics — Thermal insulation products for buildings — Specifications
ISO 3994:2007 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (Fourth Edition)
ISO 3994:2014 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification

ZA-SANS, Plastic thread specification

CKS 178-1985 Plastics interscrews

KE-KEBS, Plastic thread specification

KS 06-323-1982 KENYA STANDARD SPECIFICATION FOR ISO METRIC THREADS
KS 03-379-1982 KENYA STANDARD SPECIFICATION FOR MELAMINE PLASTIC TABLEWARE

Association of German Mechanical Engineers, Plastic thread specification

DVS 2240-1-2004
DVS 2213 Beiblatt 1-2010 Qualification testing regulations for the qualification test to become a specialist for plastics welding

Professional Standard - Aerospace, Plastic thread specification

QJ 890.2-1984 Plastic Extrusion Mold Threaded Core (for Fixing Inserts)
QJ 890.4-1984 Plastic Extrusion Mold Threaded Core (for Fixing Inserts)
QJ 890.5-1984 Plastic Extrusion Mold Threaded Core (for Fixing Inserts)
QJ 890.1-1984 Combination threaded core for plastic extrusion die (for fixing inserts)

TH-TISI, Plastic thread specification

TIS 17088-2012 Specifications for compostable plastics

GOSTR, Plastic thread specification

GOST 17622-1972 Industrial organic plastic. Specifications
GOST R 58726-2019 Plastic and rubber tile coatings. Specifications
GOST 19034-1982 Tubes of polyvinylchloride plastic. Specifications
GOST 34288-2017 Pipeline valves. Butterfly valves of thermoplastics materials. General specifications
GOST 34289-2017 Pipeline valves. Gate valves of thermoplastics materials. General specifications
GOST 34290-2017 Pipeline valves. Diaphragm valves of thermoplastics materials. General specifications
GOST 34292-2017 Pipeline valves. Ball valves of thermoplastics materials. General specifications
GOST 34291-2017 Pipeline valves. Check valves of thermoplastics materials. General specifications
GOST R 58654-2019 Automobile roads of general use. Metal corrugated spiralvoice pipes. Specifications
GOST R 59150-2020 Vapor-insulating flexible polymeric materials (thermoplastic and elastomeric). General specifications

ES-AENOR, Plastic thread specification

UNE 10-088-1985
UNE 53-491 Pt.1-1991 Plastics. Decorative laminates of polyesters. Specifications
UNE 53 085

Japanese Industrial Standards Committee (JISC), Plastic thread specification

JIS B 0216-3:2013 ISO metric trapezoidal screw threads -- Basic dimensions
JIS Z 3831:1989 Standard qualification procedure for welding technique of plastics
JIS Z 3831:2002 Standard qualification procedure for welding technique of plastics

SAE - SAE International, Plastic thread specification

SAE AMS3050-2017 Performance Specification Anti-Seize Thread Compound@ High Temperature
SAE AMS3050/1-2017 Performance Specification Anti-Seize Thread Compound@ High Temperature - Copper Only
SAE AMS3050/3-2017 Performance Specification Anti-Seize Thread Compound@ High Temperature - Nickel Only
SAE AMS3050/5-2017 Performance Specification Anti-Seize Thread Compound@ High Temperature - PTFE Only
SAE AMS3050/2-2017 Performance Specification Anti-Seize Thread Compound@ High Temperature - Aluminum Only
SAE AMS3050/6-2017 Performance Specification Anti-Seize Thread Compound@ High Temperature - ‘Nickel+Graphite’ Only
SAE MA1568A-2018 Nut@ Self Locking - UNS S66286@ 425°C & 650°C@ 1100 MPa@ MJ Thread@ Procurement Specification For@ Metric
SAE AMS3050/7-2017 Performance Specification Anti-Seize Thread Compound@ High Temperature - ‘Copper+Graphite+Aluminum’ Only
SAE AMS3050/9-2017 Performance Specification Anti-Seize Thread Compound@ High Temperature - ‘Graphite+Calcium Fluoride’ Only
SAE AMS3050/4-2017 Performance Specification Anti-Seize Thread Compound@ High Temperature - Molybdenum Disulphide; Graphite Only

GM North America, Plastic thread specification

GM 9981736-2002 Plastic Adhesive Compounds Used in Conjunction with Thread
GM GMM125-1988 Straight Thread Filler and Drain Plugs General Specifications

Korean Agency for Technology and Standards (KATS), Plastic thread specification

KS T 1350-2020 Specifications for compostable plastic packaging materials
KS B ISO 7180:2006 Pneumatic fluid power-Cylinders-Bore and port thread sizes
KS B ISO 7180:2013 Pneumatic fluid power－Cylinders－Bore and port thread sizes
KS W ISO 7689:2007 Aerospace－Alloy steel bolts with strength classification 1 100 MPa and MJ threads－Procurement specification
KS B ISO 15245-1-2015(2020) Gas cylinders — Parallel threads for connection of valves to gas cylinders — Part 1: Specification
KS M ISO 4898:2018 Rigid cellular plastics — Thermal insulation products for buildings — Specifications
KS W 0934-2013 Aerospace－Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1550 MPa－Procurement specification
KS M ISO 15526-1:2012 Plastics-Polyketone(PK) moulding and extrusion materials-Part 1:Designation system and basis for specifications
KS M ISO 20028-1:2019 Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 1: Designation system and basis for specifications

BE-NBN, Plastic thread specification

NBN T 41-012-1979 Specifications for reinforced plastics - General
NBN T 42-402-1978 Plastic _pipes and fittings - Measurement of dimensions

CH-SNV, Plastic thread specification

SNV 81509-1952
SNV 137 202.4-1970
VSM 13179-1968
VSM 11857-1974
SN 591 385/11-1990 Testing of Textiles: Twist of Ring-Spun Yarns - Determination by Simple Untwist I Retwist Method
SNV 57610-1949
VSM 18750-1965
SEV 195 d-1949
SN 198 602-1990 Textile Floor Coverings - Suitability ranges
VSM 12262-1927
VSM 33650-1969
SNV 742 401.9-1971
VSM 15285-1967
SN ISO 898/1:1981 Textiles — Tests for colour fastness Section Z02: Colour fastness to metals in the dye-bath:hon and copper
VSM 23780-1973
VSM 76140.1-1974
VSM 10875-1936
SN 010 901-1978

U.S. Military Regulations and Norms, Plastic thread specification

ARMY MIL-I-45914 A-1991 INSERT, SCREW THREAD - LOCKED IN, KEY LOCKED, GENERAL SPECIFICATION FOR
ARMY MIL-I-45910 C SUPP 1-1985 INSERT, SCREW THREAD-LOCKED IN AND RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR
ARMY MIL-I-45910 C-1985 INSERT, SCREW THREAD-LOCKED IN AND RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR

Danish Standards Foundation, Plastic thread specification

DS/ISO 7180:1989 Pneumatic fluid power. Cylinders. Bore and port thread sizes
DS/EN ISO 3994:2011 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification
DS/EN ISO 7792-1:2013 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DS/EN ISO 14526-1:2000 Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 1: Designation system and basis for specifications
DS/EN ISO 2898-1:1999 Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 1: Designation system and basis for specifications

Aerospace Industries Association/ANSI Aerospace Standards, Plastic thread specification

AIA/NAS NAS 1838-1982 Inserts, Screw Thread - Metallic, Keyring Locked, Specification for (Rev. 1)
AIA/NAS NAS1838-2013 INSERTS, SCREW THREAD, METALLIC, KEYRING LOCKED, SPECIFICATION FOR (Rev 2)
AIA/NAS NASM85353-2012 NUTS, FASTENERS, INTERNALLY THREADED, PRELOAD LOCKING, 450 °F, 800 °F AND 1,200 °F, GENERAL SPECIFICATION FOR (Rev 1)
AIA/NAS NAS 278-1947 Tube Fittings Molded from Thermosetting Plastic Materials, Specification for (Rev. 1)

The American Road & Transportation Builders Association, Plastic thread specification

AASHTO M 252-2007 Standard Specification for Corrugated Polyethylene Drainage Pipe

European Committee for Standardization (CEN), Plastic thread specification

EN ISO 3994:2011 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification
EN ISO 3994:2000 Plastics Hoses - Helical-Thermoplastic-Reinforced Thermoplastics Hoses for Suction and Discharge of Aqueous Materials - Specification
EN ISO 17855-1:2014 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 1: Designation system and basis for specifications
EN ISO 16396-1:2022 Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 16396-1:2022)

Society of Automotive Engineers (SAE), Plastic thread specification

SAE AS50151B-2013 Connectors, Electrical, Circular Threaded, AN Type, General Specification For
SAE MA1943-1987 NUT, SELF LOCKING - UNS N07001, 760°C, 1250 MPa & 1100 MPa, MJ THREAD, PROCUREMENT SPECIFICATION FOR, METRIC
SAE MA1568-2012 Nut, Self Locking - UNS S66286, 425°C & 650°C, 1100 MPa, MJ Thread, Procurement Specification For, Metric
SAE AS4723-2018 Insert, Screw Thread, Self-Locking, UNS S66286, Key Locked, Plastic Self Locking Device, Solid Film Lubricant Procurement Specification For
SAE AS4723-2007 Insert, Screw Thread, Self-Locking, UNS S66286, Key Locked, Plastic Self Locking Device, Solid Film Lubricant Procurement Specification For
SAE AS3502-2014 INSERT, SCREW THREAD, SELF LOCKING PLASTIC LOCKING DEVICE, SOLID FILM LUBRICATED SELF-BROACHING KEYS, UNS S66286
SAE AS3502A-2019 INSERT, SCREW THREAD, SELF LOCKING PLASTIC LOCKING DEVICE, SOLID FILM LUBRICATED SELF-BROACHING KEYS, UNS S66286
SAE AIR4923-1996 Bolts and Screws, Aerospace Engine - Materials, Procurement Specifications and Properties

CO-ICONTEC, Plastic thread specification

ICONTEC 915-1981

Lithuanian Standards Office , Plastic thread specification

LST EN ISO 3994:2011 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2007)

CL-INN, Plastic thread specification

INDITECNOR 55-16

IT-UNI, Plastic thread specification

UNI 6960-1971
UNI 4324-1959
UNI EN ISO 24023-1:2020 Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 1: Designation system and basis for specifications

YU-JUS, Plastic thread specification

JUS G.C7.202-1990 Cellular plastics. Specification for rigid cellular materials used in the thermal insulation of buildings

AENOR, Plastic thread specification

UNE 16562:2004 Tools for pipes. Die heads for conic threading. Technical specifications.
UNE-EN ISO 3994:2014 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2014)
UNE 53491-1:2017 Plastics. Decorative laminates of polyesters. Part 1. Specifications

HU-MSZT, Plastic thread specification

MSZ 1167-1958

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Plastic thread specification

GB/T 12010.3-2010 Plastic.Poly(vinyl alcohol)(PVAL)materials.Part 3:Specification
GB/T 12008.2-2010 Plastics.Polyether polyols.Part 2:Specification
GB 12001.1-12001.3-89 Moulding materials for windows of unpl asticized polyvinyl chloride-Designation,quality specification and determination of properties
GB/T 12001.2-1989 Moulding materials for windows of unplasticized polyvinyl chloride--Part 2: Quality specification

National Electrical Manufacturers Association（NEMA), Plastic thread specification

NEMA TCB-3-2001 User's Manual for the Installation of Underground Corrugated Coilable Plastic Utility Duct (CCD)

KR-KS, Plastic thread specification

KS M ISO 17855-1-2017 Plastics ㅡ Polyethylene (PE) moulding and extrusion materials ㅡ Part 1: Designation system and basis for specifications
KS M ISO 19069-1-2017 Plastics ㅡ Polypropylene (PP) moulding and extrusion materials ㅡ Part 1: Designation system and basis for specifications
KS M ISO 4898-2018 Rigid cellular plastics — Thermal insulation products for buildings — Specifications
KS M ISO 20028-1-2019 Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 1: Designation system and basis for specifications

PT-IPQ, Plastic thread specification

NP EN 1450/A1-2000 Plastics piping systems Glass-reinforced thermosetting plastics (GRP) components Test methods to prove the design of bolted flange joints

ES-UNE, Plastic thread specification

UNE-EN ISO 14526-1:2000 PLASTICS - PHENOLIC POWDER MOULDING COMPOUNDS (PF-PMCs) - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS. (ISO 14526-1:1999)
UNE-EN 14680:2016 Adhesives for non-pressure thermoplastics piping systems - Specifications
UNE-EN ISO 24025-1:2021 Plastics - Sulfone polymer moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 24025-1:2020)

International Federation of Trucks and Engines, Plastic thread specification

NAVISTAR ESP EM-92.101-GS-2015 VOID - Coiled Thread Inserts - General Specifications Metric Series (Noun Code 4675)

Professional Standard - Aquaculture, Plastic thread specification

SC 116-1983 Specification series, technology and hygienic requirements of plastic fish boxes

Defense Logistics Agency, Plastic thread specification

DLA QPL-28840-40-2006 CONNECTORS, ELECTRICAL, CIRCULAR THREADED, HIGH DENSITY, HIGH SHOCK SHIPBOARD, CLASS D, GENERAL SPECIFICATION FOR
DLA MIL-C-19978/21 A VALID NOTICE 2-2011 Capacitors, Fixed, Plastic (or Paper-Plastic) Dielectric, Axial-Wire Terminal, Threaded-Stud Retainer, Tubular (Uninsulated), (Hermetically Sealed in Metal Cases), Style CQ11

ISUZU - Isuzu Motors Ltd., Plastic thread specification

INDEX VOLUME 5-2001 Material Specifications and Test Methods - Plastics and Rubbers (Japanese/English Version)

DE-VDA, Plastic thread specification

VDA 235-103-2005