ZH
RU
ES

Plastic Packing Specifications

Plastic Packing Specifications, Total:499 items.

In the international standard classification, Plastic Packing Specifications involves: Equipment for the chemical industry, Rubber and plastics products, Wastes, Construction materials, Dentistry, Installations in buildings, Plastics, Welding, brazing and soldering, Road engineering, Petroleum products in general, Raw materials for rubber and plastics, Materials for the reinforcement of composites, Protective equipment, Reinforced plastics, Pipeline components and pipelines, Cellular materials, Refractories, Cases. Boxes. Crates, Vocabularies, Powder metallurgy, Surface treatment and coating, Industrial furnaces, Company organization and management, Shipbuilding and marine structures in general, Insulating materials, Paint ingredients, Electricity. Magnetism. Electrical and magnetic measurements, Bottles. Pots. Jars, Kitchen equipment, Laboratory medicine, Iron and steel products, Road vehicle systems, Materials for aerospace construction, External sewage systems, Products of the textile industry, Adhesives, Non-ferrous metals, Pharmaceutics, Cans. Tins. Tubes, Chipless working equipment, Electrical wires and cables.

Professional Standard - Chemical Industry, Plastic Packing Specifications

• HG/T 5099-2016 Plastic structured tower packing
• HG/T 3986-2016 Plastic tower packings
• HG/T 21557.3-2006 Plastic cascade ring packing
• HG/T 3986-2007 Specification for plastic tower packing

Professional Standard - Machinery, Plastic Packing Specifications

• JB/T 5209-1991 plastic filler

机械电子工业部, Plastic Packing Specifications

• JB 5209-1991 plastic filler

BELST, Plastic Packing Specifications

• STB 1417-2003 Filler dolomite. Specifications
• STB 826-2017 Stuffed material. General specifications
• STB 1264-2001 Plastic profiles for windows and doors. Specifications
• STB 1240-2000 Roll fiberglass plastic. Specifications
• STB 1103-98 Glass fiber plastic reinforcement. Specifications
• STB 1267-2001 Sealants of polyvinylchloride plastic. Specifications
• STB 1156-99 Furniture made of plastics. General specifications
• STB 951-94 Plastic and metal toys. General specifications
• STB 1064-97 Floor tiles from thermoplastic material. Composites. Specifications
• STB 1065-97 Roof tile from thermoplastic material composites. Specifications
• STB 1015-97 Household and consumer products made of plastics. General specifications

CH-SNV, Plastic Packing Specifications

• SEV 191 d-1950
• VSM 76140.1-1974
• SN EN 13067-2021 Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies
• VSM 10856.2-1943
• SNV 93100-1966
• SN ISO 105/Z01:1984 Textiles — Tests for colour fastnessSection X01: Colour fastness to carbonizing: Aluminium Chloride
• SNV 742 401.6-1971

Professional Standard - Energy and Power Planning, Plastic Packing Specifications

• NDGJ 88-1989 Technical regulations for cooling tower plastic water spray filler

CU-NC, Plastic Packing Specifications

• NC 30-47-1986 Plastica. Industrial Plastic Helmets. Quality Specifications
• NC 30-42-1985 Plastics PVC Boots Quality Specifications
• NC 30-40-1985 Plastics. Sport Glasses Quality Specifications
• NC 30-38-1985 Piastics. Rigid PVC Pipes Quality Specifications
• NC 30-58-1986 Plastics. Safety Glasses Panoramic Model. Quality Specifications
• NC 30-67-1987 Plastics Industry. Findings for Furniture General Quality Specifications
• NC 98-16-1987 Non-Electrical Household Equipment. Plástic Brush for Brooms Ouality Specifications

YU-JUS, Plastic Packing Specifications

• JUS G.C0.012-1991 Plastics - Symbols - Fillers and reinforcing materials
• JUS G.C7.202-1990 Cellular plastics. Specification for rigid cellular materials used in the thermal insulation of buildings

IN-BIS, Plastic Packing Specifications

• IS 10073-1982
• IS 5414-1969
• IS 7087-1979
• IS 13713-1993 Plastic chairs for general office purposes. Specification
• IS 13798-1993 Polyurethane base knifing filler (two pack) for exterior painting of railway coaches. Specification
• IS 13664-1993 Poly-pallets for bag storage godowns. Specification
• IS 9066-1979
• IS 9065-1979
• IS 7295-1974

Association Francaise de Normalisation, Plastic Packing Specifications

• NF T51-800:2015 Plastiques - Spécifications pour les plastiques aptes au compostage domestique
• NF EN ISO 3262-7:1998 Matières de charge pour peintures - Spécifications et méthodes d'essai - Partie 7 : dolomite.
• NF EN ISO 3262-14:2000 Matières de charge pour peintures - Spécifications et méthodes d'essai - Partie 14 : cristobalite
• NF EN ISO 3262-15:2023 Matières de charge - Spécifications et méthodes d'essai - Partie 15 : silice vitreuse
• NF T51-400*NF EN 12943:2000 Filler materials for thermoplastics - Scope, designation, requirements, tests.
• NF EN 12943:2000 Produits d'apport pour thermoplastiques - Domaine d'application, désignation, exigences, essais
• NF EN ISO 3262-17:2000 Matières de charge pour peintures - Spécifications et méthodes d'essai - Partie 17 : silicate de calcium précipité
• NF P85-513:1985 Sealants. Plastic type mastics for packing seals. Plasticity test.
• NF EN ISO 3262-18:2000 Matières de charge pour peintures - Spécifications et méthodes d'essai - Partie 18 : silicoaluminate de sodium précipité
• NF T54-086:1990 Plastiques - Tubes et raccords en polychlorure de vinyle non plastifié (PVC-U) pour les réseaux d'irrigation enterrés - Spécifications.
• NF EN ISO 3262-5:1998 Matières de charge pour peintures - Spécifications et méthodes d'essai - Partie 5 : carbonate de calcium cristallin naturel.
• NF EN ISO 3262-12:2002 Matières de charge pour peintures - Spécifications et méthodes d'essai - Partie 12 : mica de type muscovite
• NF A95-770*NF EN ISO 22068:2014 Sintered-metal injection-moulded materials - Specifications
• NF EN ISO 15252-1:2000 Plastiques - Poudres à mouler à base d'époxydes (EP-PMC) - Partie 1 : système de désignation et base de spécification
• NF EN ISO 14526-1:2000 Plastiques - Poudres à mouler phénoliques (PF-PMC) - Partie 1 : système de désignation et base de spécification
• NF EN ISO 3262-8:2023 Matières de charge - Spécifications et méthodes d'essai - Partie 8 : argile naturelle
• NF EN ISO 3262-4:1998 Matières de charge pour peintures - Spécifications et méthodes d'essai - Partie 4 : craie.
• NF EN 13706-1:2003 Composites en plastiques renforcés - Spécification pour les profilés pultrudés - Partie 1 : désignation
• NF T50-005-1:2013 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 1: designation system and basis for specifications
• NF T54-801:1992 Plastiques - Plateaux pour libre service - Spécifications et méthodes d'essai.
• NF T50-001-1:2011 Plastics - Polyamide (PA) moulding and extrusion materials - Part 1 : designation system and basis for specification.
• NF EN ISO 6224:2011 Tuyaux en matières thermoplastiques à armature textile d'usage général pour l'eau - Spécifications
• NF EN ISO 11667:1999 Plastiques renforcés de fibre - Préimprégnés et compositions de moulage - Détermination des taux de résine, de fibre de renfort et de charge minérale. Méthodes par dissolution.
• NF EN ISO 3262-13:2023 Matières de charge - Spécifications et méthodes d'essai - Partie 13 : quartz naturel (broyé)
• NF EN ISO 3262-16:2023 Matières de charge - Spécifications et méthodes d'essai - Partie 16 : alumines hydratées
• NF EN ISO 3994:2014 Tuyaux en plastiques - Tuyaux thermoplastiques à renforcement thermoplastique en spirale pour aspiration et refoulement de matières aqueuses - Spécifications
• NF EN ISO 14530-1:2000 Plastiques - Poudres à mouler à base de polyester non saturé (UP-PMC) - Partie 1 : système de désignation et base de spécification
• NF EN 14867:2005 Emballages - Sacs plastiques pour congélation - Spécifications et méthodes d'essai
• NF EN ISO 3262-19:2021 Matières de charge - Spécifications et méthodes d'essai - Partie 19 : silice précipitée
• NF EN ISO 3262-20:2021 Matières de charge - Spécifications et méthodes d'essai - Partie 20 : silice pyrogénée
• NF T53-040-1*NF EN ISO 21970-1:2019 Plastics - Polyketone (PK) moulding and extrusion materials - Part 1 : designation system and basis for specifications
• NF T54-029:1981 Plastiques - Raccords moulés en polychlorure de vinyle non plastifié - Série pression - Spécifications
• NF EN ISO 22068:2014 Matériaux métalliques frittés pour moulage par injection - Spécifications
• NF T50-700:2014 Plastics - Rotomoulding - Characterisation of polyolefins for rotomoulding and general specifications of rotomoulded parts
• NF EN ISO 1172:1999 Plastiques renforcés de verre textile - Préimprégnés, compositions de moulage et stratifiés - Détermination des taux de verre textile et de charge minérale. Méthodes par calcination.
• NF EN ISO 3262-6:2022 Matières de charge - Spécifications et méthodes d'essai - Partie 6 : Carbonate de calcium précipité
• NF T50-015-1*NF EN ISO 24025-1:2020 Plastics - Sulfone polymer moulding and extrusion materials - Part 1 : designation system and basis for specifications
• NF T50-009-1*NF EN ISO 29988-1:2019 Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1 : designation system and basis for specifications
• NF T53-051-1*NF EN ISO 20557-1:2018 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 1 : designation system and basis for specifications
• NF T53-003-1*NF EN ISO 24023-1:2020 Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 1 : designation system and basis for specifications
• NF T50-050-2*NF EN ISO 1043-2:2012 Plastics - Symbols and abbreviated terms - Part 2 : fillers and reinforcing materials
• NF EN 1873+A1:2016 Accessoires préfabriqués pour couverture - Lanterneaux ponctuels en matière plastique - Spécifications des produits et méthodes d'essais
• NF EN ISO 15023-1:2017 Plastiques - Matériaux en poly(alcool de vinyle) (PVAL) - Partie 1 : système de désignation et base de specifications
• NF EN ISO 19712-1:2013 Plastiques - Matériaux décoratifs massifs de revêtement de surface - Partie 1 : classification et spécifications
• NF EN 1873/IN1:2016 Accessoires préfabriqués pour couverture - Lanterneaux ponctuels en matière plastique - Spécifications des produits et méthodes d'essais
• NF P85-515:1985 Sealants. Plastic type mastics for packing seals. Determination of resistance to heat.
• NF H34-051*NF EN 13045:2009 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
• NF EN ISO 8029:2014 Tuyaux plastiques - Tuyaux d'eau écrasables d'usage général renforcés textiles - Spécifications

GM Europe, Plastic Packing Specifications

• GME STD 518380-1979 Plastic 8380 Wood flour filler moulding compound Plast 8380 Tr鋗j鰈sfylld pressmassa English/Swedish
• GME QK 000745-1988 Phenoplast mit mineralischen F黮lstoffen Phenoplast with Mineral Filler
• GME QK 000731-1984 Phenoplast mit Holzmehl Phenoplast with Wood Meal German
• GME QK 000747-1989 Phenoplast mit Grafitf黮lung Phenoplast with Graphite Filling English/German
• GME QK 000741-1983 Phenoplast mit F黮lstoffen, asbestfrei Phenoplast with Fillers, Free of Asbestos German
• GME QK 000742-1983 Phenoplast mit F黮lstoffen, asbestfrei Phenoplast with Fillers, Free of Asbestos German
• GME QK 000744-1985 Phenoplast mit mineralischen F黮lstoffen und Glasfasern Phenoplast with Mineral Fillers and Glass Fibres German
• GME QK 000748-1990 Phenoplast mit Kohlefasern und Grafitzusatz Phenoplast with Carbon Fibres and Graphite Filling English/German
• GME STD 518606-1990 Plastic 8606 PA6.6 20% Mineral material/filler Plast 8606 PA6.6 20% Mineralfyllmedel English/Swedish
• GME QK 000746-1996 Phenoplast mit mineralischen F黮lstoffen und Glasfasern Phenolic Plast with Mineralic Fillers and Glass Fibres English/German
• GME QK 000749-1990 Phenoplast mit Glasfasern und Mineralien Phenoplast with Glass Fibres and Minerals English/German

PL-PKN, Plastic Packing Specifications

• PN C89104-03-1992 Plastics Symbols Fillers and reinforcing materials
• PN P50555-1992 Wall coverings in roll form. Specification for finished wallpapers, wall vinyls and plastics wallcoverings
• PN O79834-03-1987 Piastics transport packages Cases cells Specifications
• PN-EN 13067-2021-02 E Platics welding personnel--Qualfication of welders--Thermoplastics welded assemblies
• PN C89104-01-1992 Plastics Symbols General regulations and scope of the standard
• PN O79834-01-1987 Plastics transport packages Cases cells General regulations
• PN B75704-01-1986 Toilet seats of thermoplastics General specification and methods of test
• PN O79834-08-1989 Plastics transport packages Cases cells 250
• PN O79834-10-1990 Plastics transport packages Cases celles 375
• PN O79834-11-1990 Plastics transport packages Cases cells 500
• PN O79834-12-1990 Plastics transport packages Cases cells 750
• PN O79834-13-1990 Plastics transport packages Cases cells 1000
• PN O79835-03-1987 Plastics transport packages Cases without cells Specifications
• PN O79834-05-1987 Plastics transport packages Cases celles Tests

RU-GOST R, Plastic Packing Specifications

• GOST 32021-2012 Hard rock aggregates and fillers for production dre building mixes. Specifications
• GOST 5689-1979 Phenolic moulding compound. Specifications
• GOST 32496-2013 Fillers porous for light concrete. Specifications
• GOST 13448-1982 Plastic ventilating grills. Specifications
• GOST 9590-1976 Laminated paper decorative plastic. Specifications
• GOST 7883-1982 Plastic accumulator cases. Specifications
• GOST 11035.1-1993 Plastics. Determinations of apparent density of moulding materials that can be poured from a specified funnel
• GOST R 57333-2016 Blocks for wall made of concrete on the dense and porous fillers. Specifications
• PNST 36-2015 Nanomodified thermoplastical carbon composite. Specifications
• GOST 33366.2-2015 Plastics. Symbols and abbreviated terms. Part 2. Fillers and reinforcing materials
• GOST 32972-2014 Plastic manholes for sewerage and drainage systems. Specifications
• GOST R 56730-2015 Plastic flexible pipes with thermal insulation for district heating. General specifications
• GOST R 57514-2017 Rubber- or plastics-coated fabrics for water-resistant clothing. Specification
• GOST 12923-1982 Cellulose wadding medical. Specifications
• GOST 17387-1972 Guide bushings of plastics moulds and die casting dies. Construction and dimensions
• GOST 6436-1975 PE-insulated plastic-sheathed block-signalling cables. Specifications

Cooling Technology Institute, Plastic Packing Specifications

• CTI STD-136-2010 Thermoplastic Materials Used for Film Fill, Splash Fill, Louvers And Drift Eliminators

Korean Agency for Technology and Standards (KATS), Plastic Packing Specifications

• KS P 5107-2018 Dentistry — Dental plastic filling instrument
• KS P 5107-1976 Dentistry — Dental plastic filling instrument
• KS T 1350-2020 Specifications for compostable plastic packaging materials
• KS M ISO 1043-2-2013(2018) Plastics — Symbols and abbreviated terms-Part 2: Fillers and reinforcing materials
• KS M ISO 11667-2002(2017) Fibre－reinforced plastics－Moulding compounds and prepregs－Determination of resin, reinforced－fibre and mineral－filler content－Dissolution methods
• KS M ISO 800:2007 Plastics－Phenolic moulding materials－Specification
• KS M ISO 800:2012 Plastics－Phenolic moulding materials－Specification
• KS M ISO 4898:2018 Rigid cellular plastics — Thermal insulation products for buildings — Specifications
• KS M ISO 15526-1:2012 Plastics-Polyketone(PK) moulding and extrusion materials-Part 1:Designation system and basis for specifications
• KS M ISO 20028-1:2019 Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 1: Designation system and basis for specifications
• KS M ISO 8606:2006 Plastics－Prepregs－Bulk moulding compound(BMC) and dough moulding compound(DMC)－Basis for a specification
• KS M ISO 8606-2006(2016) Plastics－Prepregs－Bulk moulding compound(BMC) and dough moulding compound(DMC)－Basis for a specification
• KS M ISO 8606-2006(2021) Plastics－Prepregs－Bulk moulding compound(BMC) and dough moulding compound(DMC)－Basis for a specification
• KS F 2538-2005 Specification for preformed expansion joint fillers for concrete paving and structural construction
• KS M ISO 1172-2002(2017) Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content-Calcination methods
• KS M ISO 3262-8:2007 Extenders for paints－Specifications and methods of test－Part 8：Natural clay

RO-ASRO, Plastic Packing Specifications

• STAS 6572/1-1979 Plastics THERMOPLASTICS SPECIMENS MOULDING BY INJECTION General specifications
• STAS 6572/2-1979 Plastics THERMOPLASTICS SPECIMENS MOULDING BY COMPRESSION General specifications
• STAS SR ISO 1043-2:1995 Plastics. Symbols Part 2: Fillers and reinforcing materials

British Standards Institution (BSI), Plastic Packing Specifications

• BS 1254:1981 Specification for WC seats (plastics)
• 19/30388662 DC BS ISO 20819. Plastics. Wood-plastic recycled composites (WPRC). Specification
• 12/30266874 DC BS EN 1871. Road marking materials. Paint, thermoplastic and cold plastic materials. Specifications
• BS ISO 8605:2001 Textile-glass-reinforced plastics - Sheet moulding compound (SMC) - Basis for specification
• BS ISO 20819-1:2020 Tracked Changes. Plastics. Wood-plastic recycled composites (WPRC). Specification
• BS ISO 21844:2018 Cellular plastic. Cellulose foam thermal insulation. Material specification
• BS EN ISO 22068:2014 Sintered-metal injection-moulded materials. Specifications
• BS EN ISO 17855-1:2014 Plastics. Polyethylene (PE) moulding and extrusion materials. Designation system and basis for specifications
• BS EN ISO 20028-1:2017 Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Designation system and basis for specifications
• BS EN ISO 7792-1:2012 Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Designation system and basis for specifications
• BS EN ISO 1043-2:2011 Plastics. Symbols and abbreviated terms. Fillers and reinforcing materials
• BS ISO 19712-1:2009 Plastics. Decorative solid surfacing materials. Classification and specifications
• BS EN 12943:2000 Filler materials for thermoplastics - Scope, designation, requirements, tests
• BS EN ISO 1874-1:2010 Plastics. Polyamide (PA) moulding and extrusion materials. Designation system and basis for specification
• BS ISO 22068:2012 Sintered-metal injection-moulded materials. Specifications
• BS EN ISO 24023-1:2020 Plastics. Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Designation system and basis for specifications
• BS EN ISO 24025-1:2020 Plastics. Sulfone polymer moulding and extrusion materials - Designation system and basis for specifications
• BS EN ISO 24022-1:2020 Plastics. Polystyrene (PS) moulding and extrusion materials - Designation system and basis for specifications
• BS EN ISO 20558-1:2019 Plastics. Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Designation system and basis for specifications
• BS 1795:1976 Specification for extenders for paints
• BS EN 60674-2:1990 Specification for plastic films for electrical purposes. Methods of test
• BS EN 60674-2:2017 Specification for plastic films for electrical purposes. Methods of test
• BS EN 13067:2012 Plastics welding personnel. Qualification testing of welders. Thermoplastics welded assemblies
• BS EN 13067:2020 Plastics welding personnel. Qualification testing of welders. Thermoplastics welded assemblies
• BS EN 13067:2003 Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies
• BS 1322:1992 Specification for aminoplastic moulding materials
• BS EN ISO 3994:2011 Plastics hoses. Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials. Specification
• BS EN ISO 3994:2014 Plastics hoses. Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials Specification
• BS EN ISO 16396-1:2015 Plastics. Polyamide (PA) moulding and extrusion materials. Designation system, marking of products and basis for specifications
• 19/30387862 DC BS EN 13067. Plastics welding personnel. Qualification of welders. Thermoplastics welded assemblies
• BS 1453:1972 Specification for filler materials for gas welding
• BS ISO 6123-2:2015 Rubber or plastics covered rollers. Specifications. Surface characteristics
• BS ISO 4898:2018 Rigid cellular plastics. Thermal insulation products for buildings. Specifications
• BS EN ISO 21970-1:2019 Plastics. Polyketone (PK) moulding and extrusion materials - Designation system and basis for specifications
• BS EN ISO 1172:2023 Textile-glass-reinforced plastics. Prepregs, moulding compounds and laminates. Determination of the textile-glass and mineral-filler content using calcination methods
• BS EN ISO 24026-1:2020 Plastics. Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Designation system and basis for specifications
• BS EN ISO 21309-1:2019 Plastics. Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Designation system and basis for specifications
• BS EN ISO 16396-1:2022 Plastics. Polyamide (PA) moulding and extrusion materials - Designation system and basis for specifications
• BS ISO 28078-1:2010 Plastics. Poly(phenylene sulfide) (PPS) moulding and extrusion materials. Designation system and basis for specifications
• BS ISO 28078-1:2009 Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Designation system and basis for specifications
• BS EN ISO 21302-1:2019 Tracked Changes. Plastics. Polybutene-1 (PB-1) moulding and extrusion materials. Designation system and basis for specifications
• BS ISO 17088:2021 Plastics. Organic recycling. Specifications for compostable plastics
• BS EN ISO 21306-1:2019 Tracked Changes. Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials. Designation system and basis for specifications
• BS EN ISO 1923:1995 Cellular plastics and rubbers - Determination of linear dimensions
• BS EN 13045:2009 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances

International Organization for Standardization (ISO), Plastic Packing Specifications

• ISO 17088:2021 Specifications for compostable plastics
• ISO 17088:2012 Specifications for compostable plastics
• ISO 1043-2:1988 Plastics; symbols; part 2: fillers and reinforcing materials
• ISO 2112:1977 Plastics — Aminoplastic moulding materials — Specification
• ISO 1043-2:2011 Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials
• ISO 7792-1:2012 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 1: Designation system and basis for specifications
• ISO 20028-1:2017 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 1: Designation system and basis for specifications
• ISO 1172:1996 Textile-glass-reinforced plastics, prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods
• ISO 800:1992 Plastics; phenolic moulding materials; specification
• ISO 2112:1990 Plastics; aminoplastic moulding materials; specification
• ISO 800:1977 Plastics — Phenolic moulding materials — Specification
• ISO 4898:2018 Rigid cellular plastics — Thermal insulation products for buildings — Specifications
• ISO/FDIS 1172:1980 Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content using calcination methods
• ISO 1172:2023 Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content using calcination methods
• ISO 1043-2:2000 Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials
• ISO 8606:1990 Plastics; prepregs; bulk moulding compound (BMC) and dough moulding compound (DMC); basis for a specification
• ISO/CD 8606:2023 Plastics — Prepregs — Bulk moulding compound (BMC) and dough moulding compound (DMC) — Requirements and specifications
• ISO 24023-1:2020 Plastics — Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials — Part 1: Designation system and basis for specifications
• ISO 20819:2018 Plastics - Wood-plastic recycled composites (WPRC) - Specification

ES-AENOR, Plastic Packing Specifications

• UNE 53-491 Pt.1-1991 Plastics. Decorative laminates of polyesters. Specifications
• UNE 53-277 Pt.2-1991 Plastics. Symbols. Part 2. Fillers and reinforcing materials
• UNE 53 085

GOSTR, Plastic Packing Specifications

• GOST R 58726-2019 Plastic and rubber tile coatings. Specifications
• GOST 17622-1972 Industrial organic plastic. Specifications
• GOST 19034-1982 Tubes of polyvinylchloride plastic. Specifications
• GOST 34288-2017 Pipeline valves. Butterfly valves of thermoplastics materials. General specifications
• GOST 34289-2017 Pipeline valves. Gate valves of thermoplastics materials. General specifications
• GOST 34290-2017 Pipeline valves. Diaphragm valves of thermoplastics materials. General specifications
• GOST 34292-2017 Pipeline valves. Ball valves of thermoplastics materials. General specifications
• GOST 34291-2017 Pipeline valves. Check valves of thermoplastics materials. General specifications
• GOST R 59150-2020 Vapor-insulating flexible polymeric materials (thermoplastic and elastomeric). General specifications

ZA-SANS, Plastic Packing Specifications

• SANS 1655:2004 Welding of thermoplastics - Welding rods, fillers and solvents
• SANS 5417:2005 Density of foamed plastic fillers for life jackets
• SANS 11043-2:2004 Plastics - Symbols and abbreviated terms Part 2: Fillers and reinforcing materials
• SANS 5413:2006 Water absorption of plastics filler foam for life jackets

Japanese Industrial Standards Committee (JISC), Plastic Packing Specifications

• JIS T 5405:1979 Dental plastic filling instruments
• JIS K 6899-2:1996 Plastics -- Symbols -- Part 2: Fillers and reinforcing materials
• JIS Z 3831:1989 Standard qualification procedure for welding technique of plastics
• JIS Z 3831:2002 Standard qualification procedure for welding technique of plastics
• JIS K 6899-2:2004 Plastics -- Symbols and abbreviated terms -- Part 2: Fillers and reinforcing materials
• JIS K 6899-2:2015 Plastics -- Symbols and abbreviated terms -- Part 2: Fillers and reinforcing materials
• JIS K 7052:1999 Textile glass reinforced plastics -- Prepregs, moulding compounds and laminates -- Determination of the textile-glass and mineral-filler content -- Calcination method

Indonesia Standards, Plastic Packing Specifications

• SNI 06-6723-2002 Specification of mineral filler for bituminous paving mixtures
• SNI 03-4815-1998 Specification for preformed expansion joint fillers for concrete paving and structural construction
• SNI 01-4239-1996 Specification and test method for coconut shell powder for plywood adhesive filler

TH-TISI, Plastic Packing Specifications

• TIS 17088-2012 Specifications for compostable plastics
• TIS 1705-1998 Plastics.aminoplastic moulding materials.specification

American Society for Testing and Materials (ASTM), Plastic Packing Specifications

• ASTM D242/D242M-09(2014) Standard Specification for Mineral Filler For Bituminous Paving Mixtures
• ASTM D6394-11 Standard Specification for Sulfone Plastics (SP)
• ASTM D2609-21 Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
• ASTM D2609-14 Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
• ASTM D2609-15 Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
• ASTM F3091/F3091M-14 Standard Specification for Powder Bed Fusion of Plastic Materials
• ASTM C1054-85(1995) Standard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens
• ASTM C475/C475M-12 Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board
• ASTM D3350-14 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
• ASTM D4819-13 Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics
• ASTM C549-06(2012) Standard Specification for Perlite Loose Fill Insulation
• ASTM D2737-12 Standard Specification for Polyethylene (PE) Plastic Tubing
• ASTM D2737-12e1 Standard Specification for Polyethylene (PE) Plastic Tubing
• ASTM D4976-12 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
• ASTM D4976-12a Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
• ASTM D4976-12a(2020) Standard specifications for polyethylene plastic molding and extrusion materials
• ASTM C475/C475M-17 Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board
• ASTM C475/C475M-12e1 Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board
• ASTM D4350-16(2022) Standard Test Method for Corrosivity Index of Plastics and Fillers
• ASTM D4350-15 Standard Test Method for Corrosivity Index of Plastics and Fillers
• ASTM C515-13 Standard Specification for Chemical-Resistant Ceramic Tower Packings
• ASTM C516-08(2013)e1 Standard Specification for Vermiculite Loose Fill Thermal Insulation
• ASTM D4350-13 Standard Test Method for Corrosivity Index of Plastics and Fillers
• ASTM D4350-16 Standard Test Method for Corrosivity Index of Plastics and Fillers
• ASTM D2911-94 Standard Specification for Dimensions and Tolerances for Plastic Bottles
• ASTM D2737-12a Standard Specification for Polyethylene (PE) Plastic Tubing
• ASTM B532-85(2014) Standard Specification for Appearance of Electroplated Plastic Surfaces
• ASTM C582-09 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
• ASTM F891-00e1 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
• ASTM F891-00 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
• ASTM C764-11 Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation
• ASTM F1836M-97(2007) Standard Specification for Stuffing Tubes, Nylon, and Packing Assemblies (Metric)
• ASTM F1836M-15(2019) Standard Specification for Stuffing Tubes, Nylon, and Packing Assemblies (Metric)
• ASTM F1836M-15 Standard Specification for Stuffing Tubes, Nylon, and Packing Assemblies (Metric)
• ASTM C937-16 Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete
• ASTM D4350-00(2005) Standard Test Method for Corrosivity Index of Plastics and Fillers
• ASTM D4350-00 Standard Test Method for Corrosivity Index of Plastics and Fillers
• ASTM D3350-12 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
• ASTM D3350-12e1 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
• ASTM D2911-94(2001) Standard Specification for Dimensions and Tolerances for Plastic Bottles
• ASTM D2911/D2911M-16 Standard Specification for Dimensions and Tolerances for Plastic Bottles
• ASTM D4203-17 Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials
• ASTM D994/D994M-11 Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)
• ASTM C1081-98(2014) Standard Specification for Asbestos-Cement Corrugated Fill For Use in Cooling Towers
• ASTM C716-06(2015) Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials
• ASTM C764-17 Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation
• ASTM D1248-12 Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
• ASTM E934-94(1998) Standard Specification for Serological Pipet, Disposable Plastic
• ASTM E934-94(2021) Standard Specification for Serological Pipet, Disposable Plastic
• ASTM B883-15 Standard Specification for Metal Injection Molded (MIM) Materials
• ASTM B883-17 Standard Specification for Metal Injection Molded (MIM) Materials
• ASTM D2749-13 Standard Symbols for Dimensions of Plastic Pipe Fittings
• ASTM C1797-17 Standard Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete
• ASTM C1797-16e1 Standard Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete
• ASTM E934-94(2015) Standard Specification for Serological Pipet, Disposable Plastic
• ASTM D4101-14e1 Standard Specification for Polypropylene Injection and Extrusion Materials
• ASTM D1667-17 Standard Specification for Flexible Cellular Materials&x2014;Poly (Vinyl Chloride) Foam (Closed-Cell)
• ASTM D3261-12 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
• ASTM B793-16 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
• ASTM D3261-12e1 Standard Specification for Butt Heat Fusion Polyethylene 40;PE41; Plastic Fittings for Polyethylene 40;PE41; Plastic Pipe and Tubing
• ASTM C920-05 Standard Specification for Elastomeric Joint Sealants
• ASTM D3006-99(2004) Standard Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape
• ASTM D3006-10 Standard Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape
• ASTM D3006-99 Standard Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape
• ASTM D2301-10(2017) Standard Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
• ASTM D2466-13 Standard Specification for Polylpar;Vinyl Chloriderpar; lpar;PVCrpar; Plastic Pipe Fittings, Schedule 40
• ASTM D3841-16 Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels

AENOR, Plastic Packing Specifications

• UNE-EN 12943:2000 FILLER MATERIALS FOR THERMOPLASTICS - SCOPE, DESIGNATION, REQUIREMENTS, TESTS
• UNE-EN 15343:2008 Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content
• UNE-EN 13067:2014 Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies
• UNE-EN ISO 1043-2:2012 Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011)
• UNE 53491-1:2017 Plastics. Decorative laminates of polyesters. Part 1. Specifications
• UNE-EN ISO 11667:2000 FIBRE-REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF RESIN, REINFORCED-FIBRE AND MINERAL-FILLER CONTENT - DISSOLUTION METHODS (ISO 11667:1997)

German Institute for Standardization, Plastic Packing Specifications

• DIN EN 12943:1999-12 Filler materials for thermoplastics - Scope, designation, requirements, tests; German version EN 12943:1999
• DIN 55625-23:1999 Extenders for plastics - Part 23: Phlogopite; specifications and methods of test
• DIN 55625-4:1999 Extenders for plastics - Part 4: Whiting, specifications and methods of test
• DIN 55625-10:2013 Extenders for plastics - Part 10: Natural talc and chlorite in lamellar form, containing carbonates - Specifications and methods of test
• DIN EN ISO 22068:2014-06 Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012); German version EN ISO 22068:2014
• DIN 55625-24:1999 Extenders for plastics - Part 24: Magnesium hydroxide; specifications and methods of test
• DIN 55427:1983 Packaging means; plastic crates; 12 bottle size
• DIN EN ISO 1043-2:2012-03 Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011); German version EN ISO 1043-2:2011
• DIN EN 12943:1999 Filler materials for thermoplastics - Scope, designation, requirements, tests; German version EN 12943:1999
• DIN EN 13067:2019 Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies; German and English version prEN 13067:2019
• DIN EN 13067:2020-11 Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies; German version EN 13067:2020
• DIN VDE 0291-1:1972 Specifications for filling compounds for cable accessories and for scalding compounds; Hot-cast filling compounds, filling-compounds for cold pressing-in, two-component cold-cast filling compounds and scalding compounds
• DIN 7868-1:1982-10 Rubber and plastics covered rollers; hardness specifications
• DIN 55625-5:1999 Extenders for plastics - Part 5: Natural crystalline calcium carbonate (NCC), specifications and methods of test
• DIN EN ISO 1172:1998-12 Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content; calcination methods (ISO 1172:1996); German version EN ISO 1172:1998 / Note: To be replaced by DIN EN ISO 11...
• DIN EN ISO 14526-1:2000-08 Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14526-1:1999); German version EN ISO 14526-1:1999
• DIN EN ISO 15252-1:2000-08 Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 1: Designation system and basis for specifications (ISO 15252-1:1999); German version EN ISO 15252-1:1999
• DIN 55625-7:1999 Extenders for plastics - Part 7: Dolomite, specifications and methods of test
• DIN EN ISO 11667:1999-10 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforced-fibre and mineral-filler content - Dissolution methods (ISO 11667:1997); German version EN ISO 11667:1999
• DIN EN 14867:2005-09 Packaging - Plastic freezer bags - Specifications and test methods; German version EN 14867:2005
• DIN EN ISO 1172:2022-11 Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO/DIS 1172:2022); German and English version prEN ISO 1172:2022 / Note: Date of issu...
• DIN 65470:1989-11 Aerospace; filler metals for welding metallic materials; technical specification
• DIN EN ISO 24025-1:2020-08 Plastics - Sulfone polymer moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 24025-1:2020); German version EN ISO 24025-1:2020
• DIN 55625-6:1999 Extenders for plastics - Part 6: Precipitated calcium carbonate (PCC), specifications and methods of test
• DIN EN ISO 14530-1:2000-08 Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 1: Designation system and basis for specifications (ISO 14530-1:1999); German version EN ISO 14530-1:1999
• DIN EN ISO 1043-2:2012 Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011); German version EN ISO 1043-2:2011
• DIN 6103:2009 Means of packaging - Flexible cylindrical plastic tubes - Coex multilayer tube, dimensions, materials
• DIN EN ISO 14528-1:2000-08 Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14528-1:1999); German version EN ISO 14528-1:1999
• DIN EN ISO 14529-1:2000-08 Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 1: Designation system and basis for specifications (ISO 14529-1:1999); German version EN ISO 14529-1:1999
• DIN EN 13067:2020 Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies; German version EN 13067:2020

工业和信息化部, Plastic Packing Specifications

• HG/T 3216-2018 Test method for heat deformation resistance of plastic tower packing
• HG/T 3213-2018 Test method for drop weight impact strength of plastic tower packing
• QB/T 5303-2018 Geosynthetic four-way stretch plastic geogrid

SE-SIS, Plastic Packing Specifications

• SIS SS IEC 674:1983 Specification for plastic film for electrical purposes
• SIS SS-EN 233-1989 Wallcoverings in roll form — Specification for finished wallpapers, wall vinyls andplastics wallcoverings
• SIS 16 04 10 Specifikationer

HU-MSZT, Plastic Packing Specifications

• MNOSZ 14984-1952
• MNOSZ 14956-1952
• MNOSZ 14951-1952
• MNOSZ 14732-1954
• MNOSZ 14726-1953
• MNOSZ 14978-1953
• MNOSZ 14960-1953
• MSZ 1167-1958
• MNOSZ 14980-1952

Military Standards (MIL-STD), Plastic Packing Specifications

• DOD A-A-53508-1988 PLUGGER, PLASTIC FILLING, DENTAL, (GLICK NO. 1)
• DOD A-A-53507-1991 PLUGGER, PLASTIC FILLING, DENTAL CONTOURING INSTRUMENT, MATRIX, DENTAL

CZ-CSN, Plastic Packing Specifications

• CSN 64 0011-1967 Technical specifications for lastics products

BE-NBN, Plastic Packing Specifications

• NBN T 41-012-1979 Specifications for reinforced plastics - General
• NBN B 11-121-1995
• NBN T 42-402-1978 Plastic _pipes and fittings - Measurement of dimensions

Danish Standards Foundation, Plastic Packing Specifications

• DS/EN 12943:2000 Filler materials for thermoplastics - Scope, designation, requirements, tests
• DS/EN ISO 1043-2:2012 Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials
• DS/EN 15343:2008 Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content
• DS/EN 13067:2013 Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies
• DS/EN ISO 11667:1999 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforced-fibre and mineral-filler content - Dissolution methods
• DS/EN ISO 14526-1:2000 Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 1: Designation system and basis for specifications
• DS/EN ISO 7792-1:2013 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 1: Designation system and basis for specifications
• DS/EN ISO 1872-1:1999 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 1: Designation system and basis for specifications
• DS/EN ISO 1873-1:1996 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications
• DS/EN ISO 28941-1:2009 Plastics - Poly(phenylene ether) (PPE) moulding and extrusion materials - Part 1: Designation system and basis for specifications
• DS/EN ISO 9988-1:2006 Plastics – Polyoxymethylene (POM) moulding and extrusion materials – Part 1: Designation system and basis for specifications
• DS/EN ISO 2898-1:1999 Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 1: Designation system and basis for specifications
• DS/EN ISO 14530-1:2000 Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 1: Designation system and basis for specifications
• DS/EN ISO 1622-1:2012 Plastics - Polystyrene (PS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
• DS/ISO 17088:2021 Plastics – Organic recycling – Specifications for compostable plastics

Lithuanian Standards Office , Plastic Packing Specifications

• LST EN 12943-2001 Filler materials for thermoplastics - Scope, designation, requirements, tests
• LST EN 13067-2020 Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies
• LST EN 15343-2008 Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content
• LST EN 13067-2013 Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies
• LST EN ISO 1043-2:2012 Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011)
• LST EN ISO 11667:2000 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforced-fibre and mineral-filler content - Dissolution methods (ISO 11667:1997)

Association of German Mechanical Engineers, Plastic Packing Specifications

• DVS 2211-1979 "Filler materials for thermoplastics - Scope, designation, requirements, tests"
• DVS 2211-2005 "Weling of thermoplastics - Welding fillers - Marking, requirements and tests"
• DVS 2213 Beiblatt 1-2010 Qualification testing regulations for the qualification test to become a specialist for plastics welding

GM Holden Ltd, Plastic Packing Specifications

• HOLDEN HN 1377-1992 Putty - Plastisol Gap Filling - Hand Type

Taiwan Provincial Standard of the People's Republic of China, Plastic Packing Specifications

• CNS 7455-1981 Dental Plastic Filling Instruments
• CNS 5346-1-2005 Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials

American National Standards Institute （ANSI), Plastic Packing Specifications

• ANSI/ASTM D2737a:2012 Specification for Polyethylene (PE) Plastic Tubing
• ASME NM.3.1-2022 Nonmetallic Materials Part 1 - Thermoplastic Material Specifications
• ASME NM.3.2-2022 Nonmetallic Materials Part 2 - Reinforced Thermoset Plastic Material Specifications
• ANSI/ASTM F1733a:2013 Specification for Butt Heat Fusion Polyamide (PA) Plastic Fitting for Polyamide (PA) Plastic Pipe and Tubing
• ANSI/ASTM F442:2013 SPECIFICATION FOR CHLORINATED POLY(VINYL CHLORIDE) (CPVC) PLASTIC PIPE (SDR-PR)
• ANSI/ASTM F409:2012 Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
• ANSI/ASTM F1733:2013 Specification for Butt Heat Fusion Polyamide (PA) Plastic Fitting for Polyamide (PA) Plastic Pipe and Tubing
• ANSI/ASTM D2581:2001 Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials (08.02, 08.04)
• ANSI/ASTM D4101:2001 Propylene Plastic Injection and Extrusion Materials, Specification for (08.03)
• ANSI/ASTM F714:2013 SPECIFICATION FOR POLYETHYLENE (PE) PLASTIC PIPE (DR-PR) BASED ON OUTSIDE DIAMETER
• ANSI/ASTM F441:2013 SPECIFICATION FOR CHLORINATED POLY(VINYL CHLORIDE) (CPVC) PLASTIC PIPE, SCHEDULES 40 AND 80
• ANSI/ASTM D2464:2013 Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

United States Navy, Plastic Packing Specifications

• NAVY QPL-17578-14 NOTICE 1-2006 PACKING MATERIAL, PLASTIC (FOR DOGS FOR WATERTIGHT CLOSURES) (SYMBOL 1425)
• NAVY QPL-17578-14-2004 PACKING MATERIAL, PLASTIC (FOR DOGS FOR WATERTIGHT CLOSURES) (SYMBOL 1425)
• NAVY QPL-24249-5 NOTICE 1-2006 PLASTIC MATERIAL, CELLULAR POLYURETHANE, RIGID, VOID FILLER, FOAM-IN-PLACE, LARGE SCALE AND INSTALLATION OF
• NAVY QPL-24249-5-1996 PLASTIC MATERIAL, CELLULAR POLYURETHANE, RIGID, VOID FILLER, FOAM-IN-PLACE, LARGE SCALE AND INSTALLATION OF
• NAVY QPL-24249-5 NOTICE 2-2008 PLASTIC MATERIAL, CELLULAR POLYURETHANE, RIGID, VOID FILLER, FOAM-IN-PLACE, LARGE SCALE AND INSTALLATION OF
• NAVY MIL-P-24249 A (1)-1992 PLASTIC MATERIAL, CELLULAR POLYURETHANE, RIGID, VOID FILLER, FOAM-IN-PLACE, LARGE SCALE AND INSTALLATION OF
• NAVY MIL-P-24249 A-1992 PLASTIC MATERIAL, CELLULAR POLYURETHANE, RIGID, VOID FILLER, FOAM-IN-PLACE, LARGE SCALE AND INSTALLATION OF

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Plastic Packing Specifications

• GB/T 12010.3-2010 Plastic.Poly(vinyl alcohol)(PVAL)materials.Part 3:Specification
• GB/T 1844.2-2022 Plastics—Symbols and abbreviated terms—Part 2: Fillers and reinforcing materials
• GB/T 17689-1999 Geosynthetics--Plastic geogrid
• GB/T 17689-2008 Geosynthetics.Plastic geogrids
• GB/T 19274-2003 Geosynthetics-Plastic geocell
• GB/T 12008.2-2010 Plastics.Polyether polyols.Part 2:Specification
• GB/T 1844.2-2008 Plastics.Symbols and abbreviated terms.Part2:Fillers and reinforcing materials
• GB/T 26700-2011 Rigid polyurethane(PUR)cellular plastics used for doors filling
• GB/T 1844.2-1995 Symbols of plastics and resins--Part 2: Fillers and reinforcing materials
• GB 12001.1-12001.3-89 Moulding materials for windows of unpl asticized polyvinyl chloride-Designation,quality specification and determination of properties
• GB/T 12001.2-1989 Moulding materials for windows of unplasticized polyvinyl chloride--Part 2: Quality specification

SAE - SAE International, Plastic Packing Specifications

• SAE AMS3640D-1987 Plastic Moldings Melamine-Formaldehyde@ Mineral Filled
• SAE AMS3640F-1996 Plastic Moldings Melamine-Formaldehyde@ Mineral Filled
• SAE AMS3640E-1992 Plastic Moldings Melamine-Formaldehyde@ Mineral Filled
• SAE AMS3644/1A-1987 PLASTIC ROD AND BAR@ POLYIMIDE Unfilled@ Molded
• SAE AMS3644/1C-1994 PLASTIC ROD AND BAR@ POLYIMIDE UNFILLED@ MOLDED
• SAE AMS3644/1B-1992 PLASTIC ROD AND BAR@ POLYIMIDE Unfilled@ Molded

Professional Standard - Petroleum, Plastic Packing Specifications

• SY/T 6123-1995 Double-layer pre-packed plastic sand control screen

CO-ICONTEC, Plastic Packing Specifications

• ICONTEC 915-1981

US-FCR, Plastic Packing Specifications

• FCR FED PCDT 1-1972 PLASTIC CORRUGATED DRAINAGE TUBING, TENTATIVE SPECIFICATIONS FOR

未注明发布机构, Plastic Packing Specifications

• DIN EN ISO 7792-1:2004 Plastics – Thermoplastic polyester (TP) molding compounds – Part 1: Designation system and basis for specifications
• BS 4371:1991(1999) Specification for Fibrous gland packings
• BS 1453:1972(2001) Specification for Filler materials for gas welding
• BS EN ISO 28941-1:2008(2015) Plastics — Poly (phenylene ether) (PPE) moulding and extrusion materials Part 1 : Designation system and basis for specifications
• BS EN ISO 25137-1:2017 Plastics — Sulfone polymer moulding and extrusion materials Part 1 : Designation system and basis for specifications
• ISO 28491-1:2008 Plastics — Poly(phenylene ether) (PPE) moulding and extrusion materials — Part 1: Designation system and basis for specifications
• BS EN ISO 1873-1:1995(2000) Plastics — Polypropylene (PP) mouldingandextrusion materials — Part 1 : Designation systemand basis for specifications
• BS EN ISO 1172:1999(2000) Textile - glass - reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile - glass and mineral - filler content — Calcination methods

(U.S.) Ford Automotive Standards, Plastic Packing Specifications

• FORD ESB-M18P6-A-2007 FRP FILLER, PRODUCTION REPAIR - PERFORMANCE
• FORD ESB-M4G202-A-1978 FILLER, POLYESTER - TWO COMPONENT, FOR FRP SEAMS
• FORD ESH-M4D166-C-1980 POLYPROPYLENE, TALC FILLED-, HEAT STABILIZED, INJECTION MOLDING COMPOUND
• FORD FLTM EU-BV 052-02-2000 DETERMINATION OF FLOW PROPERTIES OF EXTRUDED BODY FILLERS
• FORD WSK-M4D852-A-2006 ACETAL (POM) COPOLYMER, MOLYBDENUM DISULPHIDE FILLED MOLDING COMPOUND
• FORD ESB-M3D118-C-2004 PHENOLIC INJECTION MOLDING COMPOUND HEAT RESISTANT - MINERAL FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***

European Committee for Standardization (CEN), Plastic Packing Specifications

• EN 12943:1999 Filler materials for thermoplastics - Scope, designation, requirements, tests
• EN 13067:2012 Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies
• EN ISO 11667:1999 Fibre Reinforced Plastics - Mouldings Compounds and Prepregs - Determination of Resin, Reinforcement-Fibre and Mineral-Filler Content - Dissolution Methods
• EN 13067:2003 Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies
• EN ISO 17855-1:2014 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 1: Designation system and basis for specifications
• EN ISO 16396-1:2022 Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 16396-1:2022)
• EN ISO 1043-2:2011 Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011)
• EN ISO 24023-1:2020 Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 24023-1:2020)

Shaanxi Provincial Standard of the People's Republic of China, Plastic Packing Specifications

• DB6111/T 170-2021 Technical regulations for winter fill-up cultivation of red cabbage sprouts in plastic greenhouses

CL-INN, Plastic Packing Specifications

• INDITECNOR 55-16

IT-UNI, Plastic Packing Specifications

• UNI EN 13067-2021 Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies
• UNI EN ISO 24023-1:2020 Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 1: Designation system and basis for specifications
• UNI EN ISO 24022-1:2020 Plastics - Polystyrene (PS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

ES-UNE, Plastic Packing Specifications

• UNE-EN 13067:2021 Plastics welding personnel - Qualification of welders - Thermoplastics welded assemblies
• UNE-EN ISO 14526-1:2000 PLASTICS - PHENOLIC POWDER MOULDING COMPOUNDS (PF-PMCs) - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS. (ISO 14526-1:1999)
• UNE-EN ISO 24025-1:2021 Plastics - Sulfone polymer moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 24025-1:2020)
• UNE-EN 14680:2016 Adhesives for non-pressure thermoplastics piping systems - Specifications
• UNE-EN ISO 14528-1:2000 PLASTICS - MELAMINE-FORMALDEHYDE POWDER MOULDING COMPOUNDS (MF-PMCs) - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS. (ISO 14528-1:1999)
• UNE-EN ISO 14529-1:2000 PLASTICS - MELAMINE/PHENOLIC POWDER MOULDING COMPOUNDS (MP-PMCs) - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 14529-1:1999)

Professional Standard - Coal, Plastic Packing Specifications

• MT/T 783-1998 Reinforced filler for rubber and plastic made of ash and slag from fluidized bed Boiler Specification limits

U.S. Military Regulations and Norms, Plastic Packing Specifications

• ARMY MIL-P-13436 A VALID NOTICE 3-2013 PLASTIC SHEET, FILLED PHENOLIC, UNCURED
• ARMY MIL-O-60540 NOTICE 1-1997 OBTURATING BANDS, PLASTIC, RIGID, HIGH IMPACT, POLYVINYL CHLORIDE (MOLDED)

Society of Automotive Engineers (SAE), Plastic Packing Specifications

• SAE AMS3644/1-1994 PLASTIC ROD AND BAR, POLYIMIDE Unfilled, Molded
• SAE AMS3640B-1968 PLASTIC MOLDINGS Melamine-Formaldehyde, Mineral Filled
• SAE AMS3640C-1980 PLASTIC MOLDINGS Melamine-Formaldehyde, Mineral Filled
• SAE AMS3640D-1991 PLASTIC MOLDINGS Melamine-Formaldehyde, Mineral Filled
• SAE AMS3640A-1953 PLASTIC MOLDINGS Melamine-Formaldehyde, Mineral Filled
• SAE AMS3644/1C-1992 Plastic Rod and Bar, Polyimide, Unfilled, Molded
• SAE AMS3640-1948 PLASTIC MOLDINGS Mineral Filled Melemine-Formaldehyde
• SAE AMS3641-1946 PLASTIC MOLDING - THERMOSETTING Phenol Formaldehyde-Macerated Fabric Filled

Professional Standard - Electron, Plastic Packing Specifications

• SJ/Z 9055-1987 Paper or Plastic Printing Ribbons - Core Specifications

KR-KS, Plastic Packing Specifications

• KS M ISO 17855-1-2017 Plastics ㅡ Polyethylene (PE) moulding and extrusion materials ㅡ Part 1: Designation system and basis for specifications
• KS M ISO 19069-1-2017 Plastics ㅡ Polypropylene (PP) moulding and extrusion materials ㅡ Part 1: Designation system and basis for specifications
• KS M ISO 800-2007 Plastics－Phenolic moulding materials－Specification
• KS M ISO 4898-2018 Rigid cellular plastics — Thermal insulation products for buildings — Specifications
• KS M ISO 20028-1-2019 Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 1: Designation system and basis for specifications

ISUZU - Isuzu Motors Ltd., Plastic Packing Specifications

• INDEX VOLUME 5-2001 Material Specifications and Test Methods - Plastics and Rubbers (Japanese/English Version)
• INDEX VOLUME 5-2000 Material Specifications and Test Methods - Volume 5 Plastics@ Rubber (Japanese/English Version)
• INDEX VOLUME 5-2003 Material Specifications and Test Methods - Volume 5 Plastics and Rubber (Japanese/English Version)
• INDEX VOLUME 5-2004 Material Specifications and Test Methods - Volume 5 Plastics and Rubbers (Japanese/English Version)
• INDEX VOLUME 5-2002 Material Specifications and Test Methods - Volume 5 Plastics and Rubber (Japanese/English Version)

Military Standard of the People's Republic of China-General Armament Department, Plastic Packing Specifications

• GJB 9151-2017 Specifications for military filled composite electromagnetic safety protection conductive plastics

The American Road & Transportation Builders Association, Plastic Packing Specifications

• AASHTO M 146-1991 Standard Specification for Terms Relating to Subgrade, Soil-Aggregate, and Fill Materials

KE-KEBS, Plastic Packing Specifications

• KS 03-379-1982 KENYA STANDARD SPECIFICATION FOR MELAMINE PLASTIC TABLEWARE

Professional Standard - Aquaculture, Plastic Packing Specifications

• SC 116-1983 Specification series, technology and hygienic requirements of plastic fish boxes

AT-ON, Plastic Packing Specifications

• ONORM S 2013-1987 Dust bin, plustic, 1101; marking oj conformity

Professional Standard - Military and Civilian Products, Plastic Packing Specifications

• WJ 2361-1995 Specification for inert fillers for ammunition

CEN - European Committee for Standardization, Plastic Packing Specifications

• EN ISO 1043-2:2001 Plastics - Symbols and Abbreviated Terms - Part 2: Fillers and Reinforcing Materials

GM North America, Plastic Packing Specifications

• GM GMP.PVC.049-1995 PVC - 70 Shore A, Weatherable, 10% Mineral Filled, Extrusion Molding Compound
• GM GMP.PVC.050-1995 PVC - 65 Shore D, Weatherable, 8% Mineral Filled, Extrusion Molding Compound

Aerospace Industries Association/ANSI Aerospace Standards, Plastic Packing Specifications

• AIA/NAS NAS 278-1947 Tube Fittings Molded from Thermosetting Plastic Materials, Specification for (Rev. 1)

Others:   Polyethylene Plastic Film Specifications, Plastic pipe specification, plastic filler, Specifications for plastic films for electrical purposes., Standard Specification for Materials for Polyethylene Plastic Pipe and Fittings, Polyethylene Plastic Pipe Specifications, Polyethylene Plastic Bottle Specifications, Plastic thread specification, Polyethylene Plastic Pipe Specifications, Plastics - polycarbonate sheets - types, dimensions and characteristics, Plastic Air Hose Specifications, plastic filler, Plastic bottle size specification, Technical regulations for cooling tower plastic water spray filler, Chlorinated polyvinyl chloride plastic pipe specification, Polyethylene Plastic Bottle Specifications, Plastic Packing Specifications, plastic pipe specification symbol, Specifications of pvc plastic pipe fittings, Plastic pipe specification.