ZH
RU
ES

smoke density

smoke density, Total:126 items.

In the international standard classification, smoke density involves: TESTING, Protection against fire, Air quality, Diagnostic, maintenance and test equipment, Plastics, Electrical engineering in general, Electrical wires and cables, Construction materials, Fuels, Tobacco, tobacco products and related equipment, Fruits. Vegetables, Aerospace electric equipment and systems, On-board equipment and instruments, Aircraft and space vehicles in general, Materials for aerospace construction, Optics and optical measurements.

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, smoke density

GJB/J 5899-2006 Specification for certified reference materials of smoke density

Military Standard of the People's Republic of China-General Armament Department, smoke density

GJB/J 5230-2003 Calibration procedures for smoke density tester

Professional Standard - Civil Aviation, smoke density

MH/T 6040-2017 Test method for smoke density generated by aircraft materials
MH/T 6040-2006 Test method for smoke density generated by aircraft materials

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, smoke density

GB/T 8323-1987 Test method for flammability of plastics--Smoke density test
GB 8323-1987 Test method for flammability of plastics－Smoke density test
GB/T 8323.1-2008 Plastic.Smoke generation.Part 1:Guidance on optical-denstity testing
GB/T 8627-2007 Test method for density of smoke from the burning or decomposition of building materials
GB/T 8627-1999 Test method for density of smoke from the burning or decomposition of building materials
GB/T 8323.2-2008 Plastic.Smoke generation.Part 2:Determination of optical density by a single-chamber test
GB/T 31786-2015 Tobacco and tobacco products.Non-destructive determination of strips density variation ratio in case.Ionizing radiation method
GB/T 17651.1-1998 Measurement of smoke density of cables burning under defined conditions. Part 1: Test apparatus
GB/T 17651.2-1998 Measurement of smoke density of cables burning under defined conditions. Part 2: Test procedure and requirements

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, smoke density

PREN 2825-1990 Aerospace Series Burning Behaviour@ Determination of Smoke Density and Gas Components in the Smoke of Materials Under the Influence of Radiating Heat and Flames - Determination of Smoke Density
PREN 2826-1990 Aerospace Series Burning Behaviour@ Determination of Smoke Density and Gas Components in the Smoke of Materials Under the Influence of Radiating Heat and Flames - Determination of Gas Components in the Smoke
PREN 2825-1995 Aerospace Series Burning Behavior of Non Metallic Materials Under the Influence of Radiating Heat and Flames Determination of Smoke Density (Edition P 1)

Korean Agency for Technology and Standards (KATS), smoke density

KS R ISO 11614:2001 Reciprocating internal combustion compression-ignition engines- Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas
KS M 3047-2008 Methods for the analysis of evolved gases concentration by burning of plastics
KS M 3047-1993 Method for Measuring Smoke Density and Concentration of Gases Evolved by Incineration or Decomposition of Plastics

American Society for Testing and Materials (ASTM), smoke density

ASTM D2156-65(1970) Standard Test Method for Smoke Density In The Flue Gases From Distillate Fuels
ASTM D2843-19 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
ASTM D2156-09(2013) Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
ASTM D2156-94(2003) Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
ASTM D2156-94(1999) Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
ASTM D2156-08 Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
ASTM D2156-09 Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
ASTM D2157-94(1999) Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases From Burning Distillate Fuels
ASTM D2157-94(2013) Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases from Burning Distillate Fuels
ASTM D2157-94(2008) Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases From Burning Distillate Fuels
ASTM D2157-94(2003) Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases From Burning Distillate Fuels
ASTM D2156-80(1988)e1 Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
ASTM D2156-09(2018) Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
ASTM D2843-10 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics

American National Standards Institute （ANSI), smoke density

ANSI/ASTM D2843:1999 Test Method for Density of Smoke from the Burning or Decomposition of Plastics (08.02)
ANSI/ASTM E662a:2013 Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ANSI/ASTM E662b:2013 Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ANSI/ASTM E662c:2013 Test Method for Specific Optical Density of Smoke Generated by Solid Materials

Association Francaise de Normalisation, smoke density

NF C32-073-2:1993 MEASUREMENT OF SMOKE DENSITY OF ELECTRIC CABLES BURNING UNDER DEFINED CONDITIONS. PART 2 : TEST PROCEDURE AND REQUIREMENTS.
NF T51-073:1977 Plastics. Reaction to fire.test method to measure the density of smoke.
NF EN 3475-601:2008 Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 601 : densité de fumée
NF L52-250-601*NF EN 3475-601:2008 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601 : smoke density
NF C32-073-1:1993 MEASUREMENT OF SMOKE DENSITY OF ELECTRIC CABLES BURNING UNDER DEFINED CONDITIONS. PART 1 : TEST APPARATUS.
NF C32-073-1/A2*NF EN 61034-1/A2:2020 Measurement of smoke density of cables burning under defined conditions - Part 1 : test apparatus
NF EN 3745-601:2008 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 601 : densité de fumée
NF C32-073-1/A1*NF EN 61034-1/A1:2014 Measurement of smoke density of cables burning under defined conditions - Part 1 : test apparatus
NF C32-073-2/A2*NF EN 61034-2/A2:2020 Measurement of smoke density of cables burning under defined conditions - Part 2 : test procedure and requirements
NF EN 2825:2012 Série aérospatiale - Comportement au feu des matériaux non métalliques sous l'action de chaleur rayonnante et de flammes - Détermination de la densité de fumée
NF EN 2824:2012 Série aérospatiale - Comportement au feu des matériaux nonmétalliques sous l'action de chaleur rayonnante et de flammes - Détermination de la densité de fumée et des composants des gaz de fumée des matériaux - Équipement, appareils et moyens...

European Committee for Standardization (CEN), smoke density

prEN 864-1992 Medical electrical equipment; capnometer for uses with humans; particular requirements

Professional Standard - Aviation, smoke density

HB 6577-1992 Test method for smoke density of non-metallic materials inside civil aircraft cabin
HB 6577-2014 Test method for smoke density of non-metallic materials inside civil aircraft cabin

Society of Automotive Engineers (SAE), smoke density

SAE AS85449/5-2013 CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, FIRE RESISTANCE, LOW SMOKE DENSITY AND TOXICITY
SAE AS85449/5A-2020 CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, FIRE RESISTANCE, LOW SMOKE DENSITY AND TOXICITY
SAE AMS3310-2007 Rubber, Silicone Flame Retardant, Low Smoke Density, High Strength 65 - 75 Durometer Color White
SAE AMS3742-2022 Elastomer: Rubber, Silicone (MQ/VMQ/PVMQ) Flame Retardant, Low Smoke Density, Low Smoke Toxicity 50 – 60 Durometer Type A Hardness for Products in Pressurized Aircraft Compartment Interiors

British Standards Institution (BSI), smoke density

BS EN 61034-1:2005+A2:2020 Measurement of smoke density of cables burning under defined conditions - Test apparatus
BS EN 61034-2:2005+A2:2020 Measurement of smoke density of cables burning under defined conditions - Test procedure and requirements
BS EN 61034-2:2005+A1:2013 Measurement of smoke density of cables burning under defined conditions. Test procedure and requirements
BS 2811:1969 Specification for smoke density indicators and recorders
18/30377599 DC BS EN 61034-1 AMD2. Measurement of smoke density of cables burning under defined conditions. Part 1. Test apparatus
18/30377603 DC BS EN 61034-2 AMD2. Measurement of smoke density of cables burning under defined conditions. Part 2. Test procedure and requirements
BS EN ISO 5659-2:2013 Plastics. Smoke generation. Determination of optical density by a single-chamber test
BS EN ISO 5659-2:2012 Plastics. Smoke generation. Determination of optical density by a single-chamber test
BS EN ISO 5659-2:2017 Plastics. Smoke generation. Determination of optical density by a single-chamber test

Professional Standard - Tobacco, smoke density

YC/T 476-2013 Determination of the density of cut tobacco in cigarette.Microwave method
YC/T 236-2008 Tobacco and tobacco products.Nondestructive detection of strip density variety ratio in case.Ionizing radiation method

Japanese Industrial Standards Committee (JISC), smoke density

JIS K 7228:1987 Method for measuring smoke density and concentration of gases evolved by incineration or decomposition of plastics

European Association of Aerospace Industries, smoke density

AECMA PREN 3475-601-2001 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 601: Smoke Density Edition P 1
AECMA PREN 3475-601-2006 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 601: Smoke Density Edition P 2

German Institute for Standardization, smoke density

DIN EN 3475-601:2008 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density; German and English version EN 3475-601:2007
DIN EN 3475-601:2008-11 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density; German and English version EN 3475-601:2007
DIN EN 3745-601:2009 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 601: Smoke density; German and English version EN 3745-601:2007
DIN EN 3745-601:2009-05 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 601: Smoke density; German and English version EN 3745-601:2007 / Note: Applies in conjunction with DIN EN 3745-100 (2009-07).
DIN EN 2825:2011-07 Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of smoke density; German and English version EN 2825:2011

AENOR, smoke density

UNE-EN 61034-1:2005 Measurement of smoke density of cables burning under defined conditions -- Part 1: Test apparatus
UNE-EN 61034-1:2005/A1:2014 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
UNE-EN 61034-2:2005 Measurement of smoke density of cables burning under defined conditions -- Part 2: Test procedure and requirements
UNE-EN 61034-2:2005/A1:2013 Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements

Standard Association of Australia （SAA）, smoke density

AS/NZS IEC 61034.1:2017 Measurement of smoke density of cables burning under defined conditions, Part 1: Test apparatus
AS/NZS IEC 61034.2:2017 Measurement of smoke density of cables burning under defined conditions, Part 2: Test procedure and requirements

未注明发布机构, smoke density

BS 7622-1:1993(1999) Measurement ofsmoke density ofelectric cables burning under defined conditions — Part 1 : Test apparatus —
BS 7622-2:1993(1999) Measurement ofsmoke density ofelectric cables burning under defined conditions — Part 2 : Test procedure and requirements
BS EN 3745-601:2007(2008) Aerospace series — Fibres and cables, optical, aircraft use — Test methods — Part 601 : Smoke density
BS EN 50268-1:2000 Common test methods for cables under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 1: Apparatus
BS EN 50268-2:2000 Common test methods for cables under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 2: Procedure

ES-UNE, smoke density

UNE-EN 61034-1:2005/A2:2020 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
UNE-EN 3475-601:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density (Endorsed by AENOR in November of 2007.)
UNE-EN 61034-2:2005/A2:2020 Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
UNE-EN 3745-601:2007 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 601: Smoke density (Endorsed by AENOR in November of 2007.)
UNE-EN 2825:2011 Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of smoke density (Endorsed by AENOR in June of 2011.)

ZA-SANS, smoke density

SANS 61034-1:2006 Measurement of smoke density of cables burning under defined conditions Part 1: Test apparatus
SANS 61034-2:2006 Measurement of smoke density of cables burning under defined conditions Part 2: Test procedure and requirements

International Electrotechnical Commission (IEC), smoke density

IEC 61034-1:2005+AMD1:2013+AMD2:2019 CSV Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
IEC 61034-1:2013 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
IEC 61034-1:2019 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
IEC 61034-1:2005+AMD1:2013 CSV Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
IEC 61034-1:1997 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
IEC 61034-1:2005/AMD1:2013 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
IEC 61034-1:2005 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
IEC 61034-2:2005/AMD2:2019 Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
IEC 61034-2:2005+AMD1:2013+AMD2:2019 CSV Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
IEC 61034-1:2005/AMD2:2019 Amendment 2 - Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
IEC 61034-2:2019 Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
IEC 61034-2:2005+AMD1:2013 CSV Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
IEC 61034-2:2005/AMD1:2013 Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
IEC 61034-2:2013 Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
IEC 61034-2:2005 Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
IEC 61034-2:2005/COR1:2006 Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements; Corrigendum 1

Danish Standards Foundation, smoke density

DS/EN 61034-1:2006 Measurement of smoke density of cables burning under defined conditions – Part 1: Test apparatus
DS/EN 3745-601:2007 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 601: Smoke density
DS/EN 61034-2:2006 Measurement of smoke density of cables burning under defined conditions – Part 2: Test procedure and requirements
DS/EN 61034-2/A1:2013 Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
DS/EN 2825:2011 Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of smoke density

Lithuanian Standards Office , smoke density

LST EN 3745-601-2007 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 601: Smoke density
LST EN 61034-1-2005 Measurement of smoke density of cables burning under defined conditions. Part 1: Test apparatus (IEC 61034-1:2005)
LST EN 61034-2-2005 Measurement of smoke density of cables burning under defined conditions. Part 2: Test procedure and requirements (IEC 61034-2:2005)
LST EN 2825-2011 Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of smoke density

国家市场监督管理总局、中国国家标准化管理委员会, smoke density

GB/T 17651.1-2021 Measurement of smoke density of cables or optical fiber cables burning under defined conditions—Part 1: Test apparatus
GB/T 17651.2-2021 Measurement of smoke density of cables or optical fiber cables burning under defined conditions—Part 2: Test procedure and requirements

AT-OVE/ON, smoke density

OVE EN 61034-1-2021 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus (german version)

Professional Standard - Machinery, smoke density

JB/T 4278.16-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 16: Smoke density test device

CEN - European Committee for Standardization, smoke density

EN 2825:2011 Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of smoke density

CZ-CSN, smoke density

CSN 64 0150-1989 Determination of the smoke optical ensity

CENELEC - European Committee for Electrotechnical Standardization, smoke density

EN 50268-1:1999 Common Test Methods for Cables under Fire Conditions - Measurement of Smoke Density of Cables Burning under Defined Conditions - Part 1: Apparatus
EN 50268-2:1999 Common Test Methods for Cables under Fire Conditions - Measurement of Smoke Density of Cables Burning under Defined Conditions Part 2: Procedure

NZ-SNZ, smoke density

AS/NZS 1660.5.2:2006 Test methods for electric cables, cords and conductors Method 5.2: Fire testsMeasurement of smoke density of cables burning under defined conditions