ZH
RU
ES

spectrometer block

spectrometer block, Total:499 items.

In the international standard classification, spectrometer block involves: Analytical chemistry, Optics and optical measurements, Fibre optic communications, Special measuring equipment for use in telecommunications, Geology. Meteorology. Hydrology, Vocabularies, Medical equipment, Non-ferrous metals, Metalliferous minerals, Radiation measurements, Electronic components in general, Metrology and measurement in general, Non-destructive testing, Testing of metals, Linear and angular measurements, Paints and varnishes, Optical equipment, Products of the chemical industry, Optoelectronics. Laser equipment, Laboratory medicine, Water quality, Test conditions and procedures in general, Quality, Products of the textile industry, Solar energy engineering, Products of non-ferrous metals, Ferrous metals, Nuclear energy engineering, Measurement of volume, mass, density, viscosity, General methods of tests and analysis for food products, Plastics, Paint ingredients, Organic chemicals, Astronomy. Geodesy. Geography, Air quality, Power stations in general, Electricity. Magnetism. Electrical and magnetic measurements, Technical drawings, Materials for aerospace construction, Radiation protection, Particle size analysis. Sieving, Physics. Chemistry, Surface treatment and coating, Petroleum products in general, Fuels, Ceramics, Lubricants, industrial oils and related products, Leather technology, Soil quality. Pedology, Lamps and related equipment.


National Metrological Verification Regulations of the People's Republic of China, spectrometer block

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, spectrometer block

  • GB/T 21191-2007 Atomic fluorescence spectrometer
  • GB/T 42027-2022 Gas-phase molecular absorption spectrometer
  • GB/T 32266-2015 Method of performance testing for atomic fluorescence spectrometer
  • GB/T 25481-2010 On-line ultraviolet/visible spectrum analyzer
  • GB/T 21186-2007 Fourier transform infrared spectrometer
  • GB/T 5678-1985 The method for sampling cast alloys for spectrochemical analysis
  • GB/T 5678-2013 Sampling methods of spectrochemical analysis for cast alloys
  • GB/T 6060.4-1988 Roughness comparison specimens--Polished surfaces
  • GB/T 25184-2010 Verification method for X-ray photoelectron spectrometers
  • GB/T 8432-1987 Humidity test control for colour fastness to light
  • GB 8432-1987 Humidity test control for colour fastness to light
  • GB/T 36244-2018 Inductively coupled plasma atomic emission spectrometer
  • GB/T 21006-2007 Surface chemical analysis.X-ray photoelectron and Auger electron spectrometers.Linearity of intensity scale
  • GB/T 31364-2015 Test methods for main performance of energy dispersive X-ray fluorescence spectrometer
  • GB/T 33252-2016 Nanotechnology—Performance testing for laser confocal microscope Raman spectrometers
  • GB/Z 42358-2023 Determination of Accuracy of Wavelength Dispersive X-ray Fluorescence Spectrometer for Iron Ore
  • GB/T 28634-2012 Microbeam analysis.Electron probe microanalysis.Quantitative point analysis for bulk specimen using wavelength dispersive X-ray spectroscopy
  • GB/T 13370-1992 Determination of lithium,sodium,potassium and cesium in uranium dioxide dioxide powders and pellets by atomic absorption spectrophotometry/flame emission spectrophotometry
  • GB/T 22571-2008 Surface chemical analysis.X-ray photoelectron spectrometers.Calibration of energy scales

Jilin Provincial Standard of the People's Republic of China, spectrometer block

Taiwan Provincial Standard of the People's Republic of China, spectrometer block

  • CNS 14341-1999 Optical spectrum analyzer
  • CNS 5223-1980 Method of Test for Zinc in Water (Atomic Absorption, Direct)
  • CNS 5225-1980 Method of Test for Manganese in Water (Atomic Absorption, Dorect)
  • CNS 5224-1980 Method of Test for Nickel in Water (Atomic Absoption, Direct)
  • CNS 5462-1980 Method of Test for Lead in Water (Atomic Absorption, Direct)
  • CNS 5463-1980 The Method of Test for Cabmium in Water (Atomic Absorption, Direct)
  • CNS 5465-1980 Method of Test for Cobalt in Water (Atomic Absorption, Direct)
  • CNS 5466-1980 Method of Test for Iron in Water (Atomic Absorption, Direct)
  • CNS 5464-1980 Method of Test for Copper in Water (Atomic Absorption, Direct)
  • CNS 5468-1980 Method of Test for Lead in Water (Atomic Absorption, Chelation-Extraction)

Professional Standard - Machinery, spectrometer block

U.S. Air Force, spectrometer block

Group Standards of the People's Republic of China, spectrometer block

  • T/ZZB 0673-2018 Emission spectrometer
  • T/QGCML 1522-2023 FLA Micro Fiber Spectrometer
  • T/CAIA YQ004-2018 Performance testing method for liquid chromatograph coupled with atomic fluorescence spectrometer
  • T/SHDSGY 031-2023 Technical specification for high-resolution spectrometer
  • T/CSTM 00445-2021 Calibration specification for glow discharge mass spectrometry
  • T/CSTM 00901-2023 Calibration specification for handheld X-ray fluorescence spectrometer
  • T/CSTM 00159-2020 Calibration methods of portable Raman spectroscopy
  • T/CAIA YQ003-2016 Testing Methods for Optical/Electrical Characteristics of Linear Charge Coupled Imaging Device for Spectrometer
  • T/CSTM 00964-2022 General rules for performance evaluation of atomic spectrometer
  • T/CAQI 108-2020 Specification for verification and evaluation of portable Raman spectrometer
  • T/NAIA 069-2021 Determination of mercury in dry plant by water bath hot extraction and atomic fluorescence spectrometry
  • T/CAIA SH004-2015 Rice-Determination of cadmium-Solid sampling electrothermal vaporization atomic fluorescence spectrometry
  • T/CIS 17006-2022 General technical specification of Fourier transform near-infrared spectrometer
  • T/CSTM 00962-2022 Evaluation method for spectrometer performance of spark discharge atomic emission
  • T/CAIA SH012-2020 Rice —Determination of cadmium —Direct solid sample analysis using plasma jet atomic emission spectrometry

BE-NBN, spectrometer block

  • NBN P 32-016-1977 Zinc ingots - Selection and preparation of aamples for spectrographic analysis
  • NBN P 32-017-1977 Zinc alloy ingots - Selection and preparation of samples for spectrographic analysis
  • NBN EN 1138-1995 Fruit and vegetable juices - Enzymatic determination of L-malic acid (L-malate) content - NADH spectrometric method

American Society for Testing and Materials (ASTM), spectrometer block

  • ASTM E1217-11 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
  • ASTM E1217-00 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
  • ASTM E1217-05 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
  • ASTM E388-04(2023) Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers
  • ASTM E1507-98 Standard Guide for Describing and Specifying the Spectrometer of an Optical Emission Direct-Reading Instrument
  • ASTM E388-04(2015) Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers
  • ASTM E1217-11(2019) Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
  • ASTM E3029-15(2023) Standard Practice for Determining Relative Spectral Correction Factors for Emission Signal of Fluorescence Spectrometers
  • ASTM E356-78(1996) Practices for Describing and Specifying the Spectrograph
  • ASTM E3029-15 Standard Practice for Determining Relative Spectral Correction Factors for Emission Signal of Fluorescence Spectrometers
  • ASTM E2143-01(2021) Standard Test Method for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons
  • ASTM E2143-01(2013) Standard Test Method for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons
  • ASTM E716-94(2002) Standard Practices for Sampling Aluminum and Aluminum Alloys for Spectrochemical Analysis
  • ASTM E716-16(2021)e2 Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry
  • ASTM E1866-97(2007) Standard Guide for Establishing Spectrophotometer Performance Tests
  • ASTM E1866-97(2002) Standard Guide for Establishing Spectrophotometer Performance Tests
  • ASTM E1866-97 Standard Guide for Establishing Spectrophotometer Performance Tests
  • ASTM E1683-02(2014)e1 Standard Practice for Testing the Performance of Scanning Raman Spectrometers
  • ASTM E996-04 Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
  • ASTM E996-10 Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
  • ASTM E991-06 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method
  • ASTM E958-13 Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
  • ASTM E634-96(2001) Standard Practice for Sampling of Zinc and Zinc Alloys for Optical Emission Spectrometric Analysis
  • ASTM E2529-06(2022) Standard Guide for Testing the Resolution of a Raman Spectrometer
  • ASTM E2529-06e1 Standard Guide for Testing the Resolution of a Raman Spectrometer
  • ASTM E2977-15(2023) Standard Practice for Measuring and Reporting Performance of Fourier-Transform Nuclear Magnetic Resonance (FT-NMR) Spectrometers for Liquid Samples
  • ASTM E2977-14 Standard Practice for Measuring and Reporting Performance of Fourier-Transform Nuclear Magnetic Resonance 40;FT-NMR41; Spectrometers for Liquid Samples
  • ASTM B982-20 Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric or ICP Analysis
  • ASTM E1770-95 Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment
  • ASTM E1770-95(2006) Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment
  • ASTM E2911-23 Standard Guide for Relative Intensity Correction of Raman Spectrometers
  • ASTM E2911-13 Standard Guide for Relative Intensity Correction of Raman Spectrometers
  • ASTM D5381-93(2014) Standard Guide for X-Ray Fluorescence 40;XRF41; Spectroscopy of Pigments and Extenders
  • ASTM E2977-15 Standard Practice for Measuring and Reporting Performance of Fourier-Transform Nuclear Magnetic Resonance (FT-NMR) Spectrometers for Liquid Samples
  • ASTM E634-96 Standard Practice for Sampling of Zinc and Zinc Alloys for Optical Emission Spectrometric Analysis
  • ASTM E2529-06 Standard Guide for Testing the Resolution of a Raman Spectrometer
  • ASTM E2529-06(2014) Standard Guide for Testing the Resolution of a Raman Spectrometer
  • ASTM E1840-96(2022) Standard Guide for Raman Shift Standards for Spectrometer Calibration
  • ASTM E902-05 Standard Practice for Checking the Operating Characteristics of X-Ray Photoelectron Spectrometers
  • ASTM D8340-20a Standard Practice for Performance-Based Qualification of Spectroscopic Analyzer Systems
  • ASTM D8340-20 Standard Practice for Performance-Based Qualification of Spectroscopic Analyzer Systems
  • ASTM E1683-02(2022) Standard Practice for Testing the Performance of Scanning Raman Spectrometers
  • ASTM D8340-22 Standard Practice for Performance-Based Qualification of Spectroscopic Analyzer Systems
  • ASTM E1016-07(2020) Standard Guide for Literature Describing Properties of Electrostatic Electron Spectrometers
  • ASTM E634-05 Standard Practice for Sampling of Zinc and Zinc Alloys for Optical Emission Spectrometric Analysis
  • ASTM E1010-84(2004) Standard Practice for Preparation of Disk Specimens of Steel and Iron for Spectrochemical Analysis by Remelting
  • ASTM E423-71(2002) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
  • ASTM E423-71(1996)e1 Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
  • ASTM E1010-09 Standard Practice for Preparation of Disk Specimens of Steel and Iron for Spectrochemical Analysis by Remelting
  • ASTM E1010-84(2000) Standard Practice for Preparation of Disk Specimens of Steel and Iron for Spectrochemical Analysis by Remelting
  • ASTM E932-89(2002) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E932-89(1997) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E1840-96(2002) Standard Guide for Raman Shift Standards for Spectrometer Calibration
  • ASTM E932-89(2021) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E932-89(2013) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E1770-14 Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment
  • ASTM E991-21 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method
  • ASTM D6060-96(2001) Standard Practice for Sampling of Process Vents With a Portable Gas Chromatograph
  • ASTM D6060-17 Standard Test Method for Sampling of Process Vents with a Portable Gas Chromatograph
  • ASTM C696-19 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
  • ASTM D8340-21 Standard Practice for Performance-Based Qualification of Spectroscopic Analyzer Systems
  • ASTM E1812-96 Standard Practice for Optimization of Flame Atomic Absorption Spectrometric Equipment
  • ASTM B982-12 Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric OR ICP Analysis
  • ASTM B982-14 Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric or ICP Analysis
  • ASTM B982-14e1 Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric or ICP Analysis
  • ASTM B953-07 Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis
  • ASTM E716-94(1998) Standard Practices for Sampling Aluminum and Aluminum Alloys for Spectrochemical Analysis
  • ASTM B953-21 Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis
  • ASTM B953-13 Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis
  • ASTM D7751-12 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
  • ASTM G138-96 Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
  • ASTM D6350-98 Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy
  • ASTM D6350-98(2003) Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy
  • ASTM E1009-95(2000) Standard Practice for Evaluating an Optical Emission Vacuum Spectrometer to Analyze Carbon and Low-Alloy Steel
  • ASTM D6122-21 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
  • ASTM D6122-20a Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
  • ASTM D6122-20 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
  • ASTM D6122-22 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
  • ASTM C1402-04 Standard Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples
  • ASTM C1402-98 Standard Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples
  • ASTM C1402-04(2009) Standard Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples
  • ASTM E423-71(2019) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
  • ASTM E423-71(2008) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
  • ASTM E991-11 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method
  • ASTM E827-07 Standard Practice for Identifying Elements by the Peaks in Auger Electron Spectroscopy
  • ASTM E932-89(2007) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E902-94(1999) Standard Practice for Checking the Operating Characteristics of X-Ray Photoelectron Spectrometers
  • ASTM E1172-22 Standard Practice for Describing and Specifying a Wavelength Dispersive X-Ray Spectrometer
  • ASTM E1770-19 Standard Practice for Optimization of Instrumentation for Graphite Furnace Atomic Absorption Spectrometry
  • ASTM E1172-16 Standard Practice for Describing and Specifying a Wavelength Dispersive X-Ray Spectrometer
  • ASTM D6350-14 Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy

未注明发布机构, spectrometer block

  • BS IEC 61428:1998(1999) Nuclear instrumentation — Sample containers for gamma - ray spectrometry with Ge - detectors
  • BS EN ISO 8599:1997 Optics and optical instruments — Contact lenses — Determination ofthe spectral and luminous transmittance
  • BS ISO 21270:2004(2010) Surface chemical analysis — X - ray photoelectron and Auger electron spectrometers — Linearity of intensity scale
  • BS EN 61290-3-1:2003(2004) Optical amplifiers — Test methods — Part 3 - 1 : Noise figure parameters — Optical spectrum analyzer method
  • DIN EN IEC 61290-1-1:2022 Test methods for fiber optic amplifiers – Part 1 1: Optical performance and gain parameters – Optical spectrum analyzer method

European Committee for Standardization (CEN), spectrometer block

  • CEN EN 62129-2006 Calibration of optical spectrum analyzers
  • CEN EN 62129-2006_ Calibration of optical spectrum analyzers
  • EN ISO 8599:1996 Optics and Optical Instruments - Contact Lenses - Determination of the Spectral and Luminous Transmittance ISO 8599 : 1994
  • EN ISO 16773-4:2009 Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 4: Examples of spectra of polymer-coated specimens

Association Francaise de Normalisation, spectrometer block

  • NF C93-845:2006 Calibration of optical spectrum analyzers.
  • NF C93-846-1*NF EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments - Part 1 : optical spectrum analyzers
  • NF S11-687:1997 Optics and optical instruments. Contact lenses. Determination of the spectral and luminous transmittance.
  • NF S12-003:1975 OPTICAL EQUIPMENT. FOCIMETERS. SPECIFICATIONS AND CALIBRATION.
  • NF ISO 16795:2006 Énergie nucléaire - Dosage de Gd2O3 dans des pastilles combustibles au gadolinium par spectrométrie à fluorescence X
  • NF X21-006:2007 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy.
  • NF A01-811:1975 Zinc ingots. Selection and preparation of samples for spectrographic analysis.
  • NF A01-810:1975 Zinc alloy ingots. Selection and preparation of samples for spectrographic analysis.
  • NF C57-113-2*NF EN 61853-2:2017 Photovoltaic (PV) module performance testing and energy rating - Part 2 : spectral responsivity, incidence angle and module operating temperature measurements
  • NF EN 61853-2:2017 Essais de performance et caractéristiques assignées d'énergie des modules photovoltaïques (PV) - Partie 2 : mesurages de réponse spectrale, d'angle d'incidence et de température de fonctionnement des modules
  • NF A06-840-1*NF EN ISO 3815-1:2005 Zinc and zinc alloys - Part 1 : analysis of solid samples by optical emission spectrometry
  • NF M60-827:2014 Water quality - Uranium isotopes - Test method using alpha-spectrometry
  • NF EN 62129-1:2016 Étalonnage des appareils de mesure de longueur d'onde/appareil de mesure de la fréquence optique - Partie 1 : analyseurs de spectre optique
  • NF EN 61290-5-1:2006 Amplificateurs optiques - Méthodes d'essais - Partie 5-1 : paramètres de réflectance - Méthode d'analyseur de spectre optique
  • NF X21-055:2006 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales.
  • NF C93-805-3-1*NF EN 61290-3-1:2004 Optical amplifiers - Test methods - Part 3-1 : noise figure parameters - Optical spectrum analyzer method
  • NF EN 61290-3-1:2004 Amplificateurs optiques - Méthodes d'essai - Partie 3-1 : paramètres du facteur de bruit - Méthode d'analyseur du spectre optique
  • NF T36-030-4*NF EN ISO 16773-4:2017 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 4 : examples of spectra of polymer-coated and uncoated specimens
  • NF A24-003:1985 Chemical analysis of zinc ores concentrates. Accurate determination of zinc samples by X-ray fluorescence spectrometry on sample solution containing an internal standard.
  • NF EN ISO 3815-1:2005 Zinc et alliages de zinc - Partie 1 : analyse d'échantillons massifs par spectrométrie d'émission optique
  • NF C93-805-1-1:2020 Optical amplifiers - Test methods - Part 1-1 : Power and gain parameters - Optical spectrum analyzer method
  • NF C93-805-1-1*NF EN 61290-1-1:2017 Optical amplifiers - Test methods - Part 1-1 : power and gain parameters - Optical spectrum analyzer method
  • NF EN IEC 61290-1-1:2020 Amplificateurs optiques - Méthodes d'essai - Partie 1-1 : paramètres de puissance et de gain - Méthode de l'analyseur de spectre optique
  • NF C93-805-1-1:2007 Optical amplifiers - Test methods - Part 1-1 : power and gain parameters - Optical spectrum analyzer method.
  • NF C93-845-2*NF EN 62150-2:2011 Fibre optic active components and devices - Test and measurement procedures - Part 2 : ATM-PON transceivers.

Professional Standard - Military and Civilian Products, spectrometer block

  • WJ 946-1977 Die-casting mold parts for optical instruments Die-casting mold stops for optical instruments
  • WJ 947-1977 Die-casting mold parts for optical instruments Die-casting mold stops for optical instruments
  • WJ 951-1977 Die-casting mold parts for optical instruments Die-casting mold sliders for optical instruments
  • WJ 952-1977 Die-casting mold parts for optical instruments Die-casting mold sliders for optical instruments
  • WJ 953-1977 Die-casting mold parts for optical instruments Die-casting mold sliders for optical instruments
  • WJ 944-1977 Die-casting mold parts for optical instruments Die-casting mold wedges for optical instruments
  • WJ 945-1977 Die-casting mold parts for optical instruments Die-casting mold wedges for optical instruments
  • WJ 950-1977 Die-casting mold parts for optical instruments Die-casting mold slider handles for optical instruments
  • WJ 981-1977 Optical instrument investment casting mold parts Optical instrument investment casting mold edge block
  • WJ 2300-1995 Verification Regulations for Plane Grating Spectrograph
  • WJ 2299-1995 Inductively Coupled Plasma Sequential Scanning Spectrometer Verification Regulations

British Standards Institution (BSI), spectrometer block

  • BS EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments. Optical spectrum analyzers
  • BS EN 62129:2006 Calibration of optical spectrum analyzers
  • BS ISO 21395-2:2022 Optics and photonics. Test method for refractive index of optical glasses - V-block refractometer method
  • BS EN 62343-3-2:2016 Dynamic modules. Performance specification templates. Optical channel monitor
  • BS ISO 22489:2007 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy
  • BS ISO 22489:2016 Microbeam analysis. Electron probe microanalysis. Quantitative point analysis for bulk specimens using wavelength dispersive X-ray spectroscopy
  • BS EN 61290-5-1:2006 Optical amplifiers - Test methods - Reflectance parameters - Optical spectrum analyzer method
  • BS EN 61853-2:2016 Photovoltaic (PV) module performance testing and energy rating. Spectral responsivity, incidence angle and module operating temperature measurements
  • BS EN ISO 3815-1:2005 Zinc and zinc alloys - Analysis of solid samples by optical emission spectrometry
  • BS PD ISO/TR 18231:2016 Iron ores. Wavelength dispersive X-ray fluorescence spectrometers. Determination of precision
  • PD ISO/TR 18231:2016 Iron ores. Wavelength dispersive X-ray fluorescence spectrometers. Determination of precision
  • BS ISO 21270:2004 Surface chemical analysis. X-ray photoelectron and Auger electron spectrometers. Linearity of intensity scale
  • BS EN IEC 61290-1-1:2020 Optical amplifiers. Test methods - Power and gain parameters. Optical spectrum analyzer method
  • BS ISO 16129:2012 Surface chemical analysis. X-ray photoelectron spectroscopy. Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
  • 19/30354872 DC BS ISO 16795. Nuclear energy. Determination of Gd2O3 content of gadolinium fuel pellets by X-ray fluorescence spectrometry
  • BS EN 61280-1-1:1998 Optical fibre amplifiers.Basic spectrum analyzers - Transmitter output optical power measurement for single-mode optical fibre cable
  • BS EN ISO 16773-4:2009 Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Examples of spectra of polymer-coated specimens
  • BS EN 61290-10-2:2009 Optical amplifiers. Test methods. Multichannel parameters. Pulse method using a gated optical spectrum analyzer
  • BS EN 61290-10-2:2008 Optical amplifiers – Test methods — Part 10-2: Multichannel parameters – Pulse method using a gated optical spectrum analyzer
  • BS ISO 13166:2014 Water quality. Uranium isotopes. Test method using alpha-spectrometry
  • 18/30382086 DC BS EN 61452. Nuclear instrumentation. Measurement of gamma-ray emission rates of radionuclides. Calibration and use of germanium spectrometers
  • BS EN ISO 18314-4:2021 Analytical colorimetry. Metamerism index for pairs of samples for change of illuminant
  • BS ISO 16129:2018 Tracked Changes. Surface chemical analysis. X-ray photoelectron spectroscopy. Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
  • BS EN 61290-10-2:2003 Optical amplifiers - Test methods - Multichannel parameters - Pulse method using a gated optical spectrum analyzer
  • BS ISO 15470:2005 Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters
  • BS EN ISO 20884:2011 Petroleum products. Determination of sulfur content of automotive fuels. Wavelength-dispersive X-ray fluorescence spectrometry
  • BS ISO 15470:2017 Surface chemical analysis. X-ray photoelectron spectroscopy. Description of selected instrumental performance parameters
  • BS EN ISO 16773-4:2017 Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens. Part 4: Examples of spectra of polymer-coated specimens
  • 20/30412413 DC BS EN IEC 61452. Nuclear instrumentation. Measurement of gamma-ray emission rates of radionuclides. Calibration and use of germanium spectrometers
  • BS ISO 19618:2017 Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement method for normal spectral emissivity using blackbody reference with an FTIR spectrometer
  • BS ISO 15529:2010 Optics and photonics. Optical transfer function. Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
  • BS EN ISO 24459:2023 Determination of uranium content in samples coming from the nuclear fuel cycle by L-absorption edge spectrometry
  • BS EN 61290-10-1:2003 Optical amplifiers - Test methods - Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
  • BS ISO 21270:2005 Surface chemical analysis - X-ray photoelectron and Auger electron spectrometers - Linearity of intensity scale
  • BS EN 61290-10-4:2007 Optical amplifiers - Test methods - Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
  • BS EN 61290-3-1:2003 Optical amplifiers - Test methods - Part 3-1:Noise figure parameters - Optical spectrum analyzer method
  • BS EN 61290-3-1:2004 Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters. Optical spectrum analyzer method
  • BS ISO 24459:2021 Determination of uranium content in samples coming from the nuclear fuel cycle by L-absorption edge spectrometry
  • BS EN 61290-1-1:2006 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
  • BS EN 61290-1-1:2015 Optical amplifiers. Test methods. Power and gain parameters. Optical spectrum analyzer method

国家市场监督管理总局、中国国家标准化管理委员会, spectrometer block

International Electrotechnical Commission (IEC), spectrometer block

  • IEC PAS 62129:2004 Calibration of optical spectrum analyzers
  • IEC 62129:2006 Calibration of optical spectrum analyzers
  • IEC 61428:1998 Nuclear instrumentation - Sample containers for gamma-ray spectrometry with Ge-detectors
  • IEC 61976:2000 Nuclear instrumentation - Spectrometry - Characterization of the spectrum background in HPGe nuclear gamma-ray spectrometry
  • IEC 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers
  • IEC 61853-2:2016 Photovoltaic (PV) module performance testing and energy rating - Part 2: Spectral responsivity, incidence angle and module operating temperature measurements
  • IEC 61239:1993 Nuclear instrumentation; portable gamma radiation meters and spectrometers used for prospecting; definitions, requirements and calibration
  • IEC TR3 61276:1994 Nuclear instrumentation - Guidelines for selection of metrologically supported nuclear radiation spectrometry systems
  • IEC 61290-3-1:2003 Optical amplifiers - Test methods - Part 3-1: Noise figure parameters; Optical spectrum analyzer method
  • IEC 61290-1-1:2020 RLV Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
  • IEC 61290-1-1:2020 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
  • IEC 61290-2-1:1998 Optical fibre amplifiers - Basic specification - Part 2-1: Test methods for optical power parameters - Optical spectrum analyzer
  • IEC 61290-1-1:2015 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
  • IEC 61290-1-1:2006 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
  • IEC 61290-10-2:2003 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters; Pulse method using a gated optical spectrum analyzer

Danish Standards Foundation, spectrometer block

  • DS/EN 62129/Corr. 1:2007 Calibration of optical spectrum analyzers
  • DS/EN 62129:2006 Calibration of optical spectrum analyzers
  • DS/EN 61290-5-1:2006 Optical amplifiers - Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyzer method
  • DS/EN ISO 16773-4:2009 Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 4: Examples of spectra of polymer-coated specimens
  • DS/EN 15483:2009 Ambient air quality - Atmospheric measurements near ground with FTIR spectroscopy
  • DS/EN 61290-3-1:2004 Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method
  • DS/EN ISO 3815-1:2005 Zinc and zinc alloys - Part 1: Analysis of solid samples by optical emission spectrometry
  • DS/EN 61290-1-1:2007 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
  • DS/EN IEC 61290-1-1:2020 Optical amplifiers – Test methods – Part 1-1: Power and gain parameters – Optical spectrum analyzer method
  • DS/EN 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer

IN-BIS, spectrometer block

Japanese Industrial Standards Committee (JISC), spectrometer block

  • JIS C 6192:2008 Calibration of optical spectrum analyzers
  • JIS H 1632-1:2014 Titanium.ICP atomic emission spectrometry.Part 1: General requirements and sample decomposition
  • JIS M 8205:2000 Iron ores -- X-ray fluorescence spectrometric analysis
  • JIS C 6183-1:2019 Optical spectrum analyzers -- Part 1: Test methods
  • JIS C 6183:1992 Test methods of fiber-optic spectrum analyzer
  • JIS K 7200:1986 Standard reference test specimens for calibrating a laboratory light exposure apparatus
  • JIS C 8915:1998 Measuring methods of spectral response for crystalline solar cells and modules
  • JIS H 1632-3:2014 Titanium.ICP atomic emission spectrometry.Part 3: Determination of boron
  • JIS K 0162:2010 Surface chemical analysis -- X-ray photoelectron spectroscopy -- Description of selected instrumental performance parameters

中国气象局, spectrometer block

RU-GOST R, spectrometer block

  • GOST 27176-1986 Spectroscopic optical instruments. Terms and definitions
  • GOST 9717.2-1982 Copper. Method of spectral analysis of metal standart specimens with photographic registration of spectrum
  • GOST 22091.8-1984 X-ray devices. Method of measuring spectral structure and relative spectrum contamination
  • GOST 14828-1969 Instruments for physical-chemical quantities measurement. Radiospectrometers. Terms
  • GOST 9717.3-1982 Copper. Method of spectral analysis of oxide standart specimens
  • GOST 20068.1-1979 Tinless bronze. Method of spectral analysis of metal standard specimens with spectrum photographic record
  • GOST 20068.2-1979 Tinless bronze. Method of spectral analysis of metal standard specimens with spectrum photo-electric record
  • GOST 20068.3-1979 Tinless bronze. Method of spectral analysis of oxide standard specimens with spectrum photographic record
  • GOST 9717.1-1982 Copper. Method of spectral analysis of metal standart specimens with photoelectrical registration of spectrum / Note: To be replaced by GOST 31382 (2009).
  • GOST 9519.2-1977 Lead-calcium bearing alloys. Method of spectral analysis on synthetic standart specimens
  • GOST 4.450-1986 Product-quality index system. Instruments for spectral analysis. Nomenclature of indices
  • GOST 8.197-2013 State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring of the spectral radiance, spectral radiant power, spectral irradiance, spectral radiant intensity, power and radiant intensity in spectral range
  • GOST 17173-1981 Spectral slits and attachments to them. Types, basic parameters and dimensions. Technical requirements
  • GOST 26874-1986 Ionizing radiation power spectrometers. Methods of basic parameters measurement
  • GOST 9519.1-1977 Lead-calcium bearing alloys. Method of spectral analysis on cast metalic standart specimens
  • GOST R EN ISO 14596-2008 Petroleum products. Determination of sulfur content by method of wavelength-dispersive X-ray fluorescence spectrometry

RO-ASRO, spectrometer block

  • STAS 12814-1990 ALUMINIUM AND ALUMINIUM ALLOYS Analysis by optical emission spectro- metry
  • STAS 2015/2-1985 CAST IRONS AND STEELS Sampling and samples prcparation for spectral analysis
  • STAS 11564-1982 RAPID STEELS FOR TOOLS Spectrographic analysis in emission
  • STAS 11607-1981 LOW AND MEDIUM ALLOYED CARBON STEELS Spectrographic analysis

Professional Standard - Ocean, spectrometer block

National Metrological Technical Specifications of the People's Republic of China, spectrometer block

  • JJF 1544-2015 Calibration Specification for Raman Spectrometers
  • JJF 1329-2011 Calibration Specification for Instantaneous Spectral Instruments
  • JJF 1601-2016 Calibration Specification for Spectrophotometers for Diffuse Reflectance Measurement
  • JJF 2024-2023
  • JJF 1603-2016 Calibration Specification for (0.1~2.5) THz Terahertz Spectrometers
  • JJF 1818-2020 Calibration Specification for Calibration Device of Raman Spectrometers
  • JJF 1319-2011 Calibration Specification for Fourier Transform Infrared Spectrometers
  • JJF 1133-2005 Calibration Specification of Gold Gauge Utilizing X-ray Fluorescence Spectrometry
  • JJF 1929-2021 Calibration Specification for Rotating Disc Electrode Atomic Emission Spectrometers
  • JJF 1953-2021 Calibration Specification for Gas Chromatographs with Sulfur Chemiluminescence Detector

Military Standard of the People's Republic of China-General Armament Department, spectrometer block

  • GJB 8472-2015 Verification regulation for field spectrometer
  • GJB 9726-2020 Specifications for spaceborne hyperspectral imagers
  • GJB 8662-2015 Calibration procedures for Fourier transform infrared spectrometers

Korean Agency for Technology and Standards (KATS), spectrometer block

  • KS C 6918-1995 Test methods of fiber-optic spectrum analyzer
  • KS G ISO 11380:2001 Optics and optical instruments－Ophthalmic optics－Formers
  • KS C 6918-1995(2020) Test methods of fiber-optic spectrum analyzer
  • KS B ISO 8599:2004 Optics and optical instruments-Contact lenses-Determination of the spectral and luminous transmittance
  • KS B ISO 8599:2014 Optics and optical instruments — Contact lenses — Determination of the spectral and luminous transmittance
  • KS B ISO 8599-2014(2019) Optics and optical instruments — Contact lenses — Determination of the spectral and luminous transmittance
  • KS D ISO 22489:2012 Microbeam analysis－Electron probe microanalysis－Quantitative point analysis for bulk specimens using wavelength-dispersive x-ray spectroscopy
  • KS M ISO 16773-4:2013 Paints and varnishes ㅡ Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens ㅡ Part 4: Examples of spectra of polymer-coated specimens
  • KS M ISO 6286:2010 Molecular absorption spectrometry-Vocabulary-General-Apparatus
  • KS M ISO 6286-2010(2020) Molecular absorption spectrometry－Vocabulary－General－Apparatus
  • KS D ISO 3816:2011 Zinc ingots－Selection and preparation of samples for spectrographic analysis
  • KS D ISO 3815-1:2006 Zinc and zinc alloys-Part 1:Analysis of solid samples by optical emission spectrometry
  • KS D ISO 3816-2002(2006) Zinc ingots－Selection and preparation of samples for spectrographic analysis
  • KS D ISO 10701:2002 Steel and iron－Determination of sulfur content－Methylene blue spectrophotometric method
  • KS D ISO 21270:2005 Surface chemical analysis－X-ray photoelectron and Auger electron spectrometers－Linearity of intensity scale
  • KS D ISO 21270-2005(2020) Surface chemical analysis－X-ray photoelectron and Auger electron spectrometers－Linearity of intensity scale
  • KS D ISO 19319-2005(2020) Surface chemical analysis－Auger electron spectroscopy and X-ray photoelectron spectroscopy－Determination of lateral resolution, analysis area, and sample area viewed by the analyzer
  • KS D ISO 3817-2003(2008) Zinc alloy ingots－Selection and preparation of samples for spectrographic analysis
  • KS D ISO 3815-1-2006(2016) Zinc and zinc alloys－Part 1：Analysis of solid samples by optical emission spectrometry
  • KS D ISO 15472:2003 Surface chemical analysis-X-ray photoelectron spectrometers-Calibration of energy scales
  • KS D ISO 3815-1:2021 Zinc and zinc alloys — Part 1: Analysis of solid samples by optical emission spectrometry
  • KS C IEC 61290-5-1-2007(2022) Optical amplifiers－Test methods－Part 5－1：Reflectance parameters －Optical spectrum analyzer method
  • KS C IEC 61290-5-1-2007(2017) Optical amplifiers－Test methods－Part 5－1：Reflectance parameters －Optical spectrum analyzer method
  • KS D ISO 3817:2011 Zinc alloy ingots－Selection and preparation of samples for spectrographic analysis
  • KS C IEC 61452-2017(2022) Nuclear instrumentation — Measurement of gamma-ray emission rates of radionuclides — Calibration and use of germanium spectrometers
  • KS C IEC 61290-3-1-2005(2020) Optical amplifiers－Test methods－Part 3－1：Noise figure parameters－Optical spectrum analyzer method
  • KS E ISO 15247:2012 Zinc sulfide concentrates-Determination of silver content-Acid dissolution and flame atomic absorption spectrometric method
  • KS D ISO 3497-2002(2017) Metallic coatings－Measurement of coating thickness－X-ray spectrometric methods
  • KS C IEC 61290-3-1:2005 Optical amplifiers－Test methods－Part 3－1：Noise figure parameters－Optical spectrum analyzer method
  • KS D ISO 15470:2005 Surface chemical analysis－X-ray photoelectron spectroscopy－Description of selected instrumental performance parameters
  • KS C IEC 61290-10-1-2005(2020) Optical amplifiers－Test methods－Part 10－1：Multichannel parameters－Pulse method using an optical switch and optical spectrum analyzer
  • KS M ISO 16773-4:2018 Electrochemical impedance spectroscopy(EIS) on coated and uncoated metallic specimens — Part 4: Examples of spectra of polymer-coated and uncoated specimens
  • KS P ISO 9913-1-2014(2019) Optics and optical instruments — Contact lenses — Part 1: Determination of oxygen permeability and transmissibility with the polarographic method
  • KS C IEC 61290-5-1:2007 Optical amplifiers-Test methods-Part 5-1:Reflectance parameters -Optical spectrum analyzer method
  • KS C IEC 61290-10-2-2005(2020) Optical amplifiers－Test methods－Part 10－2：Multichannel parameters－Pulse method using a gated optical spectrum analyzer

German Institute for Standardization, spectrometer block

  • DIN EN ISO 11380:1996 Optics and optical instruments - Ophthalmic optics - Formers (ISO 11380:1994); German version EN ISO 11380:1996
  • DIN EN 62129:2007 Calibration of optical spectrum analyzers (IEC 62129:2006); German version EN 62129:2006
  • DIN 51820:2013-12 Testing of lubricants - Analysis of greases by infrared spectrometer - Recording and interpretation of an infrared spectrum / Note: Applies in conjunction with DIN 51451 (2004-09).
  • DIN EN 62129 Berichtigung 1:2008 Calibration of optical spectrum analyzers (IEC 62129:2006); German version EN 62129:2006, Corrigendum to DIN EN 62129:2007-01; German version CENELEC-Cor. :2006 to EN 62129:2006
  • DIN ISO 16129:2020-11 Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer (ISO 16129:2018); Text in English
  • DIN EN ISO 3815-1:2005-08 Zinc and zinc alloys - Part 1: Analysis of solid samples by optical emission spectrometry (ISO 3815-1:2005); German version EN ISO 3815-1:2005
  • DIN EN 61290-5-1:2007 Optical amplifiers - Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyzer method (IEC 61290-5-1:2006); German version EN 61290-5-1:2006
  • DIN EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers (IEC 62129-1:2016); German version EN 62129-1:2016
  • DIN ISO 10110-11:2000 Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 11: Non-toleranced data (ISO 10110-11:1996)
  • DIN IEC 62484:2014 Radiation protection instrumentation - Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material (IEC 62484:2010)
  • DIN EN ISO 3815-1:2005 Zinc and zinc alloys - Part 1: Analysis of solid samples by optical emission spectrometry (ISO 3815-1:2005); German version EN ISO 3815-1:2005
  • DIN EN 61290-5-1:2007-03 Optical amplifiers - Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyzer method (IEC 61290-5-1:2006); German version EN 61290-5-1:2006 / Note: DIN EN 61290-5-1 (2001-06) remains valid alongside this standard until 2009-06-01.
  • DIN 51008-2:2001-12 Optical Emission Spectrometry (OES) - Part 2: Terms for flame and plasma systems
  • DIN EN 61290-3-1:2004 Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method (IEC 61290-3-1:2003); German version EN 61290-3-1:2003
  • DIN EN 61290-3-1:2004-05 Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method (IEC 61290-3-1:2003); German version EN 61290-3-1:2003
  • DIN EN 61290-1-1:2007 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method (IEC 61290-1-1:2006); German version EN 61290-1-1:2006
  • DIN EN 15483:2009-02 Ambient air quality - Atmospheric measurements near ground with FTIR spectroscopy; German version EN 15483:2008
  • DIN EN ISO 16773-4:2009 Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 4: Examples of spectra of polymer-coated specimens (ISO 16773-4:2009); English version of DIN EN ISO 16773-4:2009-09
  • DIN ISO 15632:2022-09 Microbeam analysis - Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA) (ISO 15632:2...
  • DIN EN ISO 16773-4:2017-07 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 4: Examples of spectra of polymer-coated and uncoated specimens (ISO 16773-4:2017); German version EN ISO 16773-4:2017

GOSTR, spectrometer block

  • GOST 9716.2-1979 Copper-zinc alloys. Method spectral analysis of metal standard spesimens with photoelectric registration of spectrum
  • GOST 9717.2-2018 Copper. Method of spectral analysis by metal standard specimens with photographic registration of spectrum
  • GOST 9716.3-1979 Copper-zinc alloys. Method of spectral analysis of oxide spesimens with photographic registration of spectrum
  • GOST 9716.1-1979 Copper-zinc alloys. Method of spectral analysis of metal standard spesimens with photographic registration of spectrum
  • GOST 9717.3-2018 Copper. Method of spectral analysis by oxide standard specimens

ZA-SANS, spectrometer block

  • SANS 62129:2008 Calibration of optical spectrum analyzers
  • SANS 61290-5-1:2007 Optical amplifiers - Test methods Part 5-1: Reflectance parameters - Optical spectrum analyzer method

GM Daewoo, spectrometer block

Professional Standard - Meteorology, spectrometer block

  • QX/T 159-2012 Specification for atmospheric spectrum measurement by ground-based high spectral resolution Fourier transform spectroscopy
  • QX/T 172-2012 Observation method of total column ozone with Brewer spectrophotometer
  • QX/T 206-2013 Calculation Method of Performance Index of Satellite Low Spectral Resolution Infrared Instrument

Professional Standard - Electron, spectrometer block

  • SJ/Z 3206.8-1989 Geneeral rules for preparation of standard sample for spectrum analysis
  • SJ/Z 3206.7-1989 Geneeral rules for preparation and sampling sample for emission spectrum analysis
  • SJ/Z 3206.3-1989 Instrument and its performance requirements for determination of emision spectrum
  • SJ/T 10458-1993 Standard guide for specimen handling in auger electron spectroscopy and X-ray photoelectron spectroscopy
  • SJ/T 10714-1996 Standard practice for checking the operation characteristics of X-ray photoelectron spectrometers

Lithuanian Standards Office , spectrometer block

  • LST EN 62129-2006 Calibration of optical spectrum analyzers (IEC 62129:2006)
  • LST EN 62129-2006/AC-2007 Calibration of optical spectrum analyzers (IEC 62129:2006)
  • LST EN 15483-2009 Ambient air quality - Atmospheric measurements near ground with FTIR spectroscopy
  • LST EN ISO 16773-4:2009 Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 4: Examples of spectra of polymer-coated specimens (ISO 16773-4:2009)

Professional Standard - Agriculture, spectrometer block

European Committee for Electrotechnical Standardization（CENELEC）, spectrometer block

  • EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers
  • EN 61853-2:2016 Photovoltaic (PV) module performance testing and energy rating - Part 2: Spectral responsivity, incidence angle and module operating temperature measurements
  • EN 62129:2006 Calibration of optical spectrum analyzers (Incorporating corrigendum December 2006)
  • EN 61290-1-1:2015 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
  • EN IEC 61290-1-1:2020 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
  • EN 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer

ES-UNE, spectrometer block

  • UNE-EN 62129-1:2016 Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers (Endorsed by AENOR in July of 2016.)
  • UNE-EN 61290-3-1:2003 Optical amplifiers - Test methods -- Part 3-1: Noise figure parameters - Optical spectrum analyzer method (Endorsed by AENOR in April of 2004.)
  • UNE-EN ISO 3815-1:2005 Zinc and zinc alloys - Part 1: Analysis of solid samples by optical emission spectrometry (ISO 3815-1:2005) (Endorsed by AENOR in June of 2005.)
  • UNE-EN IEC 61290-1-1:2020 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method (Endorsed by Asociación Española de Normalización in December of 2020.)
  • UNE-EN 61290-1-1:2015 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method (Endorsed by AENOR in August of 2015.)

工业和信息化部/国家能源局, spectrometer block

  • JB/T 12962.2-2016 Energy dispersive X-ray fluorescence spectrometer Part 2: Elemental analyzers
  • JB/T 12962.3-2016 Energy dispersive X-ray fluorescence spectrometer Part 3: Coating thickness analyzer
  • JB/T 12962.1-2016 Energy-dispersive X-ray fluorescence spectrometers Part 1: General techniques

IEC - International Electrotechnical Commission, spectrometer block

  • PAS 62129-2004 Calibration of optical spectrum analyzers (Edition 1.0;: 2006)

International Organization for Standardization (ISO), spectrometer block

  • ISO 8599:1994 Optics and optical instruments - Contact lenses - Determination of the spectral and luminous transmittance
  • ISO 22489:2006 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy
  • ISO 22489:2016 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength dispersive X-ray spectroscopy
  • ISO 6286:1982 Molecular absorption spectrometry; Vocabulary; General; Apparatus
  • ISO/TR 18231:2016 Iron ores - Wavelength dispersive X-ray fluorescence spectrometers - Determination of precision
  • ISO 3816:1976 Zinc ingots; Selection and preparation of samples for spectrographic analysis
  • ISO 21270:2004 Surface chemical analysis - X-ray photoelectron and Auger electron spectrometers - Linearity of intensity scale
  • ISO 16129:2012 Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
  • ISO 3817:1976 Zinc alloy ingots; Selection and preparation of samples for spectrographic analysis
  • ISO 16129:2018 Surface chemical analysis — X-ray photoelectron spectroscopy — Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer
  • ISO 3815-1:2005 Zinc and zinc alloys - Part 1: Analysis of solid samples by optical emission spectrometry
  • ISO 13166:2014 Water quality - Uranium isotopes - Test method using alpha-spectrometry
  • ISO 16773-4:2009 Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 4: Examples of spectra of polymer-coated specimens
  • ISO 21501-1:2009 Determination of particle size distribution - Single particle light interaction methods - Part 1: Light scattering aerosol spectrometer
  • ISO/TS 10867:2010 Nanotechnologies - Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
  • ISO 15472:2010 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales
  • ISO 15472:2001 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales
  • ISO 15470:2004 Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters
  • ISO 19618:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) - Measurement method for normal spectral emissivity using blackbody reference with an FTIR spectrometer
  • ISO 24459:2021 Determination of uranium content in samples coming from the nuclear fuel cycle by L-absorption edge spectrometry
  • ISO 22309:2006 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS)

Standard Association of Australia （SAA）, spectrometer block

  • AS 2563:1996 Wavelength dispersive X-ray fluorescence spectrometers - Determination of precision
  • AS 2563:2019 Iron ores — Wavelength dispersive X-ray fluorescence spectrometers — Determination of precision
  • AS/NZS 3580.15:2014
  • AS 2612:1997 Aluminium and aluminium alloys - Sampling for chemical and spectrochemical analysis
  • AS 2534:1997 Lead and lead alloys - Sampling for chemical and spectrochemical analysis
  • AS 2347:1998 Zinc and zinc alloys - Sampling for chemical and spectrochemical analysis
  • AS ISO 15470:2006 Surface chemical analysis - X-ray photoelectron spectroscopy - Description of selected instrumental performance parameters
  • AS 2614:1998 Copper and copper alloys - Sampling for chemical and spectrochemical analysis, and physical testing
  • AS/NZS 3580.12.1:2001 Methods for sampling and analysis of ambient air - Determination of light scattering - Integrating nephelometer method

Professional Standard - Aviation, spectrometer block

  • HB/Z 206-1991 Specification for sampling of specimens for spectroscopic analysis of steel and superalloys
  • HB/Z 208-1991 Specification for sampling of test samples for spectroscopic analysis of nonferrous metal materials

Heilongjiang Provincial Standard of the People's Republic of China, spectrometer block

国家药监局, spectrometer block

  • YY/T 1740.2-2021 Medical Mass Spectrometry Part 2: Matrix-Assisted Laser Desorption Ionization Time-of-Flight Mass Spectrometry

CZ-CSN, spectrometer block

  • CSN 35 6535-1983 Electronic measuring instruments. Succesive process spectra analyzers. Nomenclature of pnrameters
  • CSN 75 7554-1998 Water quality - Determination of selected polynuclear aromatic hydrocarbons (PAH) - HPLC (FLD) and GC (MSD) methods
  • CSN 42 1211-1986 The sampling of technical iron for spectrometric and chemical analysis
  • CSN 42 0600 Cast.2-1975 Antimony of high purity. Methods of chemical and spectral analysis. Preparation of the sample

Professional Standard - Medicine, spectrometer block

  • YY 91060-1999 Vocabulary of biochemical instruments.UV-VIS spectrophotometry

Indonesia Standards, spectrometer block

  • SNI 06-6596-2001 Water treatment for metal analysis by atomic absorption spectrophotometers
  • SNI 12-7181-2006 Test methods of total chromium content in leather by atomic absorption spectrophotometers (AAS)

KR-KS, spectrometer block

SE-SIS, spectrometer block

  • SIS SS IEC 714:1983 Electronic measurement equipment - Expression of the properties of spectrum analyzers

Shanxi Provincial Standard of the People's Republic of China, spectrometer block

  • DB14/T 1435-2017 Data preprocessing of ground laser raindrop spectrometer detection
  • DB1404/T 18-2021 Inspection and testing laboratory instrument analysis method validation requirements Spectroscopy

Fujian Provincial Standard of the People's Republic of China, spectrometer block

  • JJF（闽）1085-2018 Calibration Specification for Portable Raman spectrum fast detection instruments
  • DB35/T 1564-2016 Technical Requirements for Portable Rapid Raman Spectroscopy Detector

GB-REG, spectrometer block

American National Standards Institute （ANSI), spectrometer block

  • ANSI/ASTM D6645:2001 Test Methods for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
  • ANSI/TIA/EIA 455-221-2001 Optical Fiber Amplifiers - Basic Specification - Part 5 -1: Test Method for Reflectance Parameters - Optical Spectrum Analyzer

AENOR, spectrometer block

  • UNE-EN 61853-2:2017 Photovoltaic (PV) module performance testing and energy rating - Part 2: Spectral responsivity, incidence angle and module operating temperature measurements
  • UNE-EN 15483:2009 Ambient air quality - Atmospheric measurements near ground with FTIR spectroscopy
  • UNE-EN ISO 16773-4:2017 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 4: Examples of spectra of polymer-coated and uncoated specimens (ISO 16773-4:2017)

Association of German Mechanical Engineers, spectrometer block

  • VDI 3869 Blatt 4-2012 Measurement of ammonia in ambient air - Sampling with diffusive samplers - Photometric or ion chromatographic analysis

NZ-SNZ, spectrometer block

  • AS/NZS 3580.17:2016 Methods for sampling and analysis of ambient air Method 17: Determination of gaseous compounds in ambient air-Direct-reading cavity ring-down spectroscopy instrumental method

Professional Standard - Electricity, spectrometer block

  • DL/T 386-2010 Calibration for second derivative flame atomic emission spectrometer

International Commission on Illumination (CIE), spectrometer block

  • CIE 214-2014 Effect of Instrumental Bandpass Function and Measurement Interval on Spectral Quantities
  • CIE 76-1988 Intercomparison on Measurement of (Total) Spectral Radiance Factor of Luminescent Specimens (1st Edition) (Reprint 1990) (E)

Underwriters Laboratories (UL), spectrometer block

  • UL SUBJECT 4730-2012 OUTLINE OF INVESTIGATION FOR NAMEPLATE@ DATASHEET@ AND SAMPLING REQUIREMENTS OF PHOTOVOLTAIC MODULES (Issue 1)
  • UL 4730 BULLETIN-2012 UL Standard for Safety OUTLINE OF INVESTIGATION FOR NAMEPLATE@ DATASHEET@ AND SAMPLING REQUIREMENTS OF PHOTOVOLTAIC MODULES

CENELEC - European Committee for Electrotechnical Standardization, spectrometer block

  • EN 61290-2-1:1998 Optical Fibre Amplifiers - Basic Specification Part 2-1: Test Methods for Optical Power Parameters Optical Spectrum Analyzer
  • EN 61290-5-1:2000 Optical Fibre Amplifiers - Basic Specification - Part 5-1: Test Methods for Reflectance Parameters - Optical Spectrum Analyser
  • EN 61290-1-1:1998 Optical Fibre Amplifiers - Basic Specification Part 1-1: Test Methods for Gain Parameters Optical Spectrum Analyzer

中华人民共和国国家卫生和计划生育委员会, spectrometer block

  • GB/T 11713-1989 Standard methods of analyzing low specific gamma radioactivity samples by semiconductor gamma spectrometers

Professional Standard - Coal, spectrometer block

  • MT 116.2-1986 Preparation method of coal rock analysis sample Part 2 Preparation method of block coal light slice

Professional Standard - Energy, spectrometer block

  • NB/SH/T 0940-2016 Test method for the analysis of in-use lubricants using a specific 4-in-1 tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity and Laser Particle Counter)

国家能源局, spectrometer block

  • SH/T 0940-2016 Test methods for analyzing in-service lubricants using specific four-in-one testers (atomic emission spectrometry, infrared spectroscopy, viscosity and laser particle counter)

Professional Standard - Non-ferrous Metal, spectrometer block

  • YS/T 426.4-2000 Method for chemical analysis of antimony-beryllium pellets.Determination of lead,iron,manganese,magnesium contents.Atomic absorption spectrophotometric method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, spectrometer block

  • GB/T 22571-2017 Surface chemical analysis—X-ray photoelectron spectrometers—Calibration of energy scales

Guangdong Provincial Standard of the People's Republic of China, spectrometer block

  • DB44/T 1496.1-2014 Calibration method of LED test instrument Part 1: Integrating sphere spectrum test system

  Spectral Standard Blocks, spectrometer block, Spectral Standard Blocks, icp standard block, Spectrometer Standard Block, Spectral detection sample block, Spectrometer Standard Block, spectrometer block, Spectrometer Block Test, block slice, xrd of sample block, Spectrometer standard sample block, Sample blocks for spectrometer calibration, Spectrometer standard sample block, Sample block management system, tem block, Paraffin block, Spectral Block Calibration, degree comparison block, Sample storage room.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved