ZH
RU
ES

Spectrometer standard sample block

Spectrometer standard sample block, Total:236 items.

In the international standard classification, Spectrometer standard sample block involves: Analytical chemistry, Optics and optical measurements, Non-ferrous metals, Electronic components in general, Plastics, Non-destructive testing, Paint ingredients, Materials for aerospace construction, Electricity. Magnetism. Electrical and magnetic measurements, Measurement of volume, mass, density, viscosity, Radiation protection, Testing of metals, Soil quality. Pedology, Nuclear energy engineering, Lubricants, industrial oils and related products, Air quality, Products of the textile industry, Fuels, Radiation measurements, Petroleum products in general, Linear and angular measurements, Ferrous metals, Paints and varnishes, Water quality, Glass, Conducting materials.

American Society for Testing and Materials (ASTM), Spectrometer standard sample block

ASTM E1217-11 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
ASTM E1217-00 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
ASTM E1217-05 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
ASTM E388-04(2015) Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers
ASTM E1507-98 Standard Guide for Describing and Specifying the Spectrometer of an Optical Emission Direct-Reading Instrument
ASTM E388-04(2023) Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers
ASTM E1840-96(2022) Standard Guide for Raman Shift Standards for Spectrometer Calibration
ASTM E1840-96(2002) Standard Guide for Raman Shift Standards for Spectrometer Calibration
ASTM E1866-97(2007) Standard Guide for Establishing Spectrophotometer Performance Tests
ASTM E1866-97(2002) Standard Guide for Establishing Spectrophotometer Performance Tests
ASTM E1866-97 Standard Guide for Establishing Spectrophotometer Performance Tests
ASTM E1683-02(2014)e1 Standard Practice for Testing the Performance of Scanning Raman Spectrometers
ASTM E2529-06(2022) Standard Guide for Testing the Resolution of a Raman Spectrometer
ASTM E2529-06e1 Standard Guide for Testing the Resolution of a Raman Spectrometer
ASTM G138-96 Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
ASTM E3029-15(2023) Standard Practice for Determining Relative Spectral Correction Factors for Emission Signal of Fluorescence Spectrometers
ASTM E991-06 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method
ASTM E1770-95 Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment
ASTM E1770-95(2006) Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment
ASTM E2911-23 Standard Guide for Relative Intensity Correction of Raman Spectrometers
ASTM E2911-13 Standard Guide for Relative Intensity Correction of Raman Spectrometers
ASTM E1217-11(2019) Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers
ASTM E634-96(2001) Standard Practice for Sampling of Zinc and Zinc Alloys for Optical Emission Spectrometric Analysis
ASTM E958-13 Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
ASTM E3029-15 Standard Practice for Determining Relative Spectral Correction Factors for Emission Signal of Fluorescence Spectrometers
ASTM E2529-06 Standard Guide for Testing the Resolution of a Raman Spectrometer
ASTM E2529-06(2014) Standard Guide for Testing the Resolution of a Raman Spectrometer
ASTM E996-04 Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
ASTM E996-10 Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
ASTM D5381-93(2014) Standard Guide for X-Ray Fluorescence 40;XRF41; Spectroscopy of Pigments and Extenders
ASTM E423-71(2014) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
ASTM D8340-20a Standard Practice for Performance-Based Qualification of Spectroscopic Analyzer Systems
ASTM D8340-20 Standard Practice for Performance-Based Qualification of Spectroscopic Analyzer Systems
ASTM E1683-02(2022) Standard Practice for Testing the Performance of Scanning Raman Spectrometers
ASTM D8340-22 Standard Practice for Performance-Based Qualification of Spectroscopic Analyzer Systems
ASTM E1016-07(2020) Standard Guide for Literature Describing Properties of Electrostatic Electron Spectrometers
ASTM E634-96 Standard Practice for Sampling of Zinc and Zinc Alloys for Optical Emission Spectrometric Analysis
ASTM E2143-01(2021) Standard Test Method for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons
ASTM E2143-01(2013) Standard Test Method for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons
ASTM B982-20 Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric or ICP Analysis
ASTM E932-89(2002) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
ASTM E932-89(1997) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
ASTM E932-89(2021) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
ASTM E932-89(2013) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
ASTM E1770-14 Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment
ASTM E902-05 Standard Practice for Checking the Operating Characteristics of X-Ray Photoelectron Spectrometers
ASTM E2977-15(2023) Standard Practice for Measuring and Reporting Performance of Fourier-Transform Nuclear Magnetic Resonance (FT-NMR) Spectrometers for Liquid Samples
ASTM E2977-14 Standard Practice for Measuring and Reporting Performance of Fourier-Transform Nuclear Magnetic Resonance 40;FT-NMR41; Spectrometers for Liquid Samples
ASTM E991-21 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method
ASTM E634-05 Standard Practice for Sampling of Zinc and Zinc Alloys for Optical Emission Spectrometric Analysis
ASTM D8340-21 Standard Practice for Performance-Based Qualification of Spectroscopic Analyzer Systems
ASTM E1812-96 Standard Practice for Optimization of Flame Atomic Absorption Spectrometric Equipment
ASTM E2977-15 Standard Practice for Measuring and Reporting Performance of Fourier-Transform Nuclear Magnetic Resonance (FT-NMR) Spectrometers for Liquid Samples
ASTM E2108-16 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
ASTM D6060-96(2001) Standard Practice for Sampling of Process Vents With a Portable Gas Chromatograph
ASTM D6060-17 Standard Test Method for Sampling of Process Vents with a Portable Gas Chromatograph
ASTM B953-07 Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis
ASTM E716-94(1998) Standard Practices for Sampling Aluminum and Aluminum Alloys for Spectrochemical Analysis
ASTM B953-21 Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis
ASTM B953-13 Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis
ASTM C1402-04 Standard Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples
ASTM C1402-98 Standard Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples
ASTM C1402-04(2009) Standard Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples
ASTM E423-71(2019) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
ASTM E423-71(2008) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
ASTM E827-07 Standard Practice for Identifying Elements by the Peaks in Auger Electron Spectroscopy
ASTM E932-89(2007) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
ASTM E902-94(1999) Standard Practice for Checking the Operating Characteristics of X-Ray Photoelectron Spectrometers
ASTM E1172-22 Standard Practice for Describing and Specifying a Wavelength Dispersive X-Ray Spectrometer
ASTM E1770-19 Standard Practice for Optimization of Instrumentation for Graphite Furnace Atomic Absorption Spectrometry
ASTM E1172-16 Standard Practice for Describing and Specifying a Wavelength Dispersive X-Ray Spectrometer
ASTM C696-19 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
ASTM E991-11 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method
ASTM D7751-12 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
ASTM E1644-98 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM E1644-04(2016)e1 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM E1644-21 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM E1832-08 Standard Practice for Describing and Specifying a Direct Current Plasma Atomic Emission Spectrometer
ASTM E1832-08(2017) Standard Practice for Describing and Specifying a Direct Current Plasma Atomic Emission Spectrometer
ASTM D6350-98 Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy
ASTM D6350-98(2003) Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy
ASTM E2056-04(2010) Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM E2056-04(2016) Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM E1009-95(2000) Standard Practice for Evaluating an Optical Emission Vacuum Spectrometer to Analyze Carbon and Low-Alloy Steel
ASTM B982-12 Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric OR ICP Analysis
ASTM D8438/D8438M-23 Standard Test Methods for Use of Hyperspectral Sensors for Soil Nutrient Analysis of Ground Based Samples
ASTM D6350-14 Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy
ASTM B982-14 Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric or ICP Analysis
ASTM B982-14e1 Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric or ICP Analysis
ASTM E1727-99 Standard Practice for Field Collection of Soil Samples for Lead Determination by Atomic Spectrometry Techniques
ASTM E1479-16 Standard Practice for Describing and Specifying Inductively Coupled Plasma Atomic Emission Spectrometers
ASTM E2120-10 Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films
ASTM E1727-04 Standard Practice for Field Collection of Soil Samples for Lead Determination by Atomic Spectrometry Techniques
ASTM E401-70(1989)e1 Practice for Bonding Thin Spectrochemical Samples and Standards to a Greater Mass of Material
ASTM E634-12 Standard Practice for Sampling of Zinc and Zinc Alloys by Spark Atomic Emission Spectrometry
ASTM E634-18 Standard Practice for Sampling of Zinc and Zinc Alloys for Analysis by Spark Atomic Emission Spectrometry
ASTM E634-23 Standard Practice for Sampling Zinc and Zinc Alloys for Analysis by Spark Atomic Emission Spectrometry
ASTM E1728-99 Standard Practice for Field Collection of Settled Dust Samples Using Wipe Sampling Methods for Lead Determination by Atomic Spectrometry Techniques
ASTM D4808-01(2006) Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy
ASTM D4808-01 Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy
ASTM D4808-98 Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy
ASTM F1708-96 Standard Practice for Evaluation of Granular Polysilicon by Meter-Zoner Spectroscopies
ASTM D4808-01(2012) Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy
ASTM D6122-21 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
ASTM D6122-20a Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
ASTM D6122-20 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
ASTM D6122-22 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
ASTM E716-10 Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spectrochemical Analysis
ASTM D6966-13 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
ASTM E1729-04 Standard Practice for Field Collection of Dried Paint Samples for Lead Determination by Atomic Spectrometry Techniques
ASTM D5954-22 Standard Test Method for Mercury Sampling and Measurement in Gaseous Fuels by Atomic Absorption Spectroscopy
ASTM D5954-22a Standard Test Method for Mercury Sampling and Measurement in Gaseous Fuels by Atomic Absorption Spectroscopy
ASTM D5954-98(2014)e1 Standard Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy
ASTM E1552-93(1998) Standard Test Method for Determining Hafnium in Zirconium and Zirconium Alloys Using the D-C Argon Plasma Spectrometer
ASTM D7941/D7941M-23 Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
ASTM D8230-19 Standard Test Method for Measurement of Volatile Silicon-Containing Compounds in a Gaseous Fuel Sample Using Gas Chromatography with Spectroscopic Detection
ASTM E2120-00 Standard Practice for the Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films
ASTM D5954-98(2006) Standard Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy
ASTM E1306-94(2004) Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition
ASTM E1306-94(1998)e1 Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition
ASTM D5954-98 Standard Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy
ASTM E1306-22 Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Melting for Spectrochemical Analysis
ASTM D6277-01 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM D6277-99 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM D6277-01(2006) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM D6277-07(2017) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM D7941/D7941M-14 Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
ASTM E1982-98(2007) Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
ASTM D7417-17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
ASTM E716-16(2021) Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry
ASTM E716-16(2021)e1 Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry
ASTM D7343-18 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM D7343-20 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM D7343-12(2017) Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM E1741-00 Standard Practice for Preparation of Airborne Particulate Lead Samples Collected During Abatement and Construction Activities for Subsequent Analysis by Atomic Spectrometry
ASTM D7171-05(2011) Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy
ASTM D7417-10 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
ASTM D6277-07 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM F1710-97 Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
ASTM F1710-97(2002) Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
ASTM D7418-07 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
ASTM D6277-07(2012) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM E716-16 Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry
ASTM D8470-22 Standard Practice for Development and Implementation of Instrument Performance Tests for Use on Multivariate Online, At-Line and Laboratory Spectroscopic Based Analyzer Systems
ASTM D7343-12 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM D7418-12 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
ASTM F1375-92(2012) Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM D7418-20 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
ASTM D7418-12(2019) Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
ASTM D7418-21 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
ASTM D7418-22 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
ASTM E3203-21 Standard Test Method for Determination of Lead in Dried Paint, Soil, and Wipe Samples by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES)
ASTM F2405-04(2011) Standard Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer
ASTM E1421-99(2021) Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests
ASTM C1110-03(2008) Standard Practice for Sample Preparation for X-Ray Emission Spectrometric Analysis of Uranium in Ores Using the Glass Fusion or Pressed Powder Method
ASTM F2405-04 Standard Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer
ASTM F1593-08(2016) Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer
ASTM F1710-08(2016) Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
ASTM C1110-88(1997)e1 Standard Practice for Sample Preparation for X-Ray Emission Spectrometric Analysis of Uranium in Ores Using the Glass Fusion or Pressed Powder Method
ASTM E3203-19 Standard Test Method for Determination of Lead in Dried Paint, Soil, and Wipe Samples by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES)
ASTM E3203-19a Standard Test Method for Determination of Lead in Dried Paint, Soil, and Wipe Samples by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES)
ASTM E1421-99 Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers Level Zero and Level One Tests
ASTM E1421-99(2004) Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests
ASTM E1421-99(2009) Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests
ASTM F1375-92(1999) Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM D7418-23 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
ASTM E1944-98(2021) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
ASTM F1375-92(2020) Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM E1421-99(2015)e1 Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests
ASTM C1110-03 Standard Practice for Sample Preparation for X-Ray Emission Spectrometric Analysis of Uranium in Ores Using the Glass Fusion or Pressed Powder Method
ASTM D6756-09a Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
ASTM D1971-95 Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry
ASTM D1971-16 Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry
ASTM D1971-16(2021)e1 Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry
ASTM D4358-84(1999) Standard Test Method for Lead and Chromium in Air Particulate Filter Samples of Lead Chromate Type Pigment Dusts by Atomic Absorption Spectroscopy
ASTM E2927-13 Standard Test Method for Determination of Trace Elements in Soda-Lime Glass Samples Using Laser Ablation Inductively Coupled Plasma Mass Spectrometry for Forensic Comparisons
ASTM D4358-05 Standard Test Method for Lead and Chromium in Air Particulate Filter Samples of Lead Chromate Type Pigment Dusts by Atomic Absorption Spectroscopy
ASTM F1845-97 Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Reduction Glow Discharge Mass Spectrometer
ASTM E1944-98(2002) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
ASTM E1944-98 Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
ASTM F1845-97(2002) Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Reduction Glow Discharge Mass Spectrometer
ASTM E1944-98(2007) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
ASTM F1845-08 Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Resolution Glow Discharge Mass Spectrometer
ASTM E1944-98(2013) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
ASTM D7442-22 Standard Practice for Sample Preparation of Fluid Catalytic Cracking Catalysts, Catalytic Materials, and Zeolites for Elemental Analysis by Inductively Coupled Plasma Optical Emission Spectroscopy

GOSTR, Spectrometer standard sample block

GOST 9716.2-1979 Copper-zinc alloys. Method spectral analysis of metal standard spesimens with photoelectric registration of spectrum
GOST 9717.2-2018 Copper. Method of spectral analysis by metal standard specimens with photographic registration of spectrum
GOST 9716.1-1979 Copper-zinc alloys. Method of spectral analysis of metal standard spesimens with photographic registration of spectrum
GOST 9717.3-2018 Copper. Method of spectral analysis by oxide standard specimens

BE-NBN, Spectrometer standard sample block

NBN P 32-016-1977 Zinc ingots - Selection and preparation of aamples for spectrographic analysis
NBN P 32-017-1977 Zinc alloy ingots - Selection and preparation of samples for spectrographic analysis

RU-GOST R, Spectrometer standard sample block

GOST 9717.2-1982 Copper. Method of spectral analysis of metal standart specimens with photographic registration of spectrum
GOST 9717.3-1982 Copper. Method of spectral analysis of oxide standart specimens
GOST 20068.1-1979 Tinless bronze. Method of spectral analysis of metal standard specimens with spectrum photographic record
GOST 20068.2-1979 Tinless bronze. Method of spectral analysis of metal standard specimens with spectrum photo-electric record
GOST 20068.3-1979 Tinless bronze. Method of spectral analysis of oxide standard specimens with spectrum photographic record
GOST 9717.1-1982 Copper. Method of spectral analysis of metal standart specimens with photoelectrical registration of spectrum / Note: To be replaced by GOST 31382 (2009).
GOST 9519.2-1977 Lead-calcium bearing alloys. Method of spectral analysis on synthetic standart specimens
GOST 9519.1-1977 Lead-calcium bearing alloys. Method of spectral analysis on cast metalic standart specimens

Professional Standard - Electron, Spectrometer standard sample block

SJ/Z 3206.7-1989 Geneeral rules for preparation and sampling sample for emission spectrum analysis
SJ/T 10714-1996 Standard practice for checking the operation characteristics of X-ray photoelectron spectrometers
SJ/T 10458-1993 Standard guide for specimen handling in auger electron spectroscopy and X-ray photoelectron spectroscopy

Japanese Industrial Standards Committee (JISC), Spectrometer standard sample block

JIS K 7200:1986 Standard reference test specimens for calibrating a laboratory light exposure apparatus
JIS K 0165:2011 Surface chemical analysis -- Medium-resolution Auger electron spectrometers -- Calibration of energy scales for elemental analysis
JIS K 0166:2011 Surface chemical analysis -- High-resolution Auger electron spectrometers -- Calibration of energy scales for elemental and chemical-state analysis

IN-BIS, Spectrometer standard sample block

IS 12737-1988

中华人民共和国国家卫生和计划生育委员会, Spectrometer standard sample block

GB/T 11713-1989 Standard methods of analyzing low specific gamma radioactivity samples by semiconductor gamma spectrometers

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Spectrometer standard sample block

GB/T 22571-2017 Surface chemical analysis—X-ray photoelectron spectrometers—Calibration of energy scales

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Spectrometer standard sample block

GB/T 22571-2008 Surface chemical analysis.X-ray photoelectron spectrometers.Calibration of energy scales
GB/T 30701-2014 Surface chemical analysis.Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy

Group Standards of the People's Republic of China, Spectrometer standard sample block

T/TGIC 001-2023 Standard samples of mulberry silk fabrics for textile fiber identification Raman spectrometry test

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Spectrometer standard sample block

IEEE 1131-1987 STANDARD CRYOSTAT END-CAP DIMENSIONS FOR GERMANIUM SEMICONDUCTOR GAMMA-RAY SPECTROMETERS

Underwriters Laboratories (UL), Spectrometer standard sample block

UL 4730 BULLETIN-2012 UL Standard for Safety OUTLINE OF INVESTIGATION FOR NAMEPLATE@ DATASHEET@ AND SAMPLING REQUIREMENTS OF PHOTOVOLTAIC MODULES
UL 61010A-2-061 BULLETIN-2005 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Atomic Spectrometers with Thermal Atomization and Ionization

German Institute for Standardization, Spectrometer standard sample block

DIN ISO 15472:2020-05 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales (ISO 15472:2010); Text in English
DIN ISO 15472:2020 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales (ISO 15472:2010); Text in English
DIN 38406-33:2000 German standard methods for the examination of water, waste water and sludge - Cations (group E) - Part 33: Determination of manganese by atomic absorption spectrometry (E 33)

Institute of Electrical and Electronics Engineers (IEEE), Spectrometer standard sample block

ANSI/IEEE Std 1131-1987 IEEE Standard Cryostat End-Cap Dimensions for Germanium Semiconductor Gamma-Ray Spectometers
ANSI Std N42.14-1991 American National Standard Calibration and Use of Germanium Spectrometers for the Measurement of Gamma-Ray Emission Rates of Radionuclides

International Organization for Standardization (ISO), Spectrometer standard sample block

ISO 23547:2022 Measurement of radioactivity — Gamma emitting radionuclides — Reference measurement standard specifications for the calibration of gamma-ray spectrometers
ISO 17973:2016 Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis
ISO 17973:2002 Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis
ISO 17974:2002 Surface chemical analysis - High-resolution Auger electron spectrometers - Calibration of energy scales for elemental and chemical-state analysis
ISO 17331:2004/Amd 1:2010 Surface chemical analysis - Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy; Amendment 1

Korean Agency for Technology and Standards (KATS), Spectrometer standard sample block

KS D ISO 17973-2011(2021) Surface chemical analysis－Medium-resolution Auger electron spectrometers－Calibration of energy scales for elemental analysis
KS D ISO 17973:2011 Surface chemical analysis－Medium-resolution Auger electron spectrometers－Calibration of energy scales for elemental analysis
KS D ISO 17974-2011(2021) Surface chemical analysis－High-resolution Auger electron spectrometers－Calibration of energy scales for elemental and chemical-state analysis
KS D ISO 17974:2011 Surface chemical analysis－High-resolution Auger electron spectrometers－Calibration of energy scales for elemental and chemical-state analysis

British Standards Institution (BSI), Spectrometer standard sample block

BS ISO 17973:2003 Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis
BS 6200-6.2:1990 Sampling and analysis of iron, steel and other ferrous metals - Guidelines on atomic absorption spectrometric techniques - Recommendations for the application of flame atomic absorption spectrometry in standard methods for the chemical analysis of iron an
BS ISO 17974:2002 Surface chemical analysis - High-resolution Auger electron spectrometers - Calibration of energy scales for elemental and chemical-state analysis
BS 6200-6.1:1990 Sampling and analysis of iron, steel and other ferrous metals - Guidelines on atomic absorption spectrometric techniques - Recommendations for the drafting of standard methods for the chemical analysis of iron and steel by flame atomic absorption spectrom

Association Francaise de Normalisation, Spectrometer standard sample block

NF X21-054*NF ISO 17973:2006 Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis.

AASHTO - American Association of State Highway and Transportation Officials, Spectrometer standard sample block

T 375M/T 375-2017 Standard Method of Test for Identification of Iron-Based Alloy Steel Bars for Concrete Reinforcement or Dowels by Handheld X-Ray Fluorescence (XRF) Spectrometer

European Committee for Standardization (CEN), Spectrometer standard sample block

prEN ISO 23547 Measurement of radioactivity - Gamma emitting radionuclides - Reference measurement standard specifications for the calibration of gamma-ray spectrometers (ISO 23547:2022)

ES-UNE, Spectrometer standard sample block

UNE-EN ISO 24459:2023 Determination of uranium content in samples coming from the nuclear fuel cycle by L-absorption edge spectrometry (ISO 24459:2021) (Endorsed by Asociación Española de Normalización in September of 2023.)