ZH
RU
ES

Magnification and specific capacity

Magnification and specific capacity, Total:54 items.

In the international standard classification, Magnification and specific capacity involves: Conducting materials, Electricity. Magnetism. Electrical and magnetic measurements, Ceramics, Testing of metals, Water quality, Solar energy engineering, Products of non-ferrous metals, Air quality, Measurement of fluid flow, Metrology and measurement in general, Radiation measurements, Non-ferrous metals, Powder metallurgy, Electronic components in general, Fibre optic communications, Protection against fire, Electromagnetic compatibility (EMC), Television and radio broadcasting, Electronic tubes, Installations in buildings, Welding, brazing and soldering, Plastics.

CN-STDBOOK, Magnification and specific capacity

图书 A-4493 Ratiometric Theory and Practice

Korean Agency for Technology and Standards (KATS), Magnification and specific capacity

KS C IEC 61788-5:2002 Superconductivity-Part 5:Matrix to superconductor volume ratio measurement-Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
KS C IEC 61788-6:2002 Superconductivity - Part 6 : Mechanical properties measurement -Room temperature tensile test of Cu/Nb-Ti composite superconductors

International Electrotechnical Commission (IEC), Magnification and specific capacity

IEC 61584:2001 Radiation protection instrumentation - Installed, portable or transportable assemblies - Measurement of air kerma direction and air kerma rate
IEC 61280-2-4:1998 Fibre optic communication subsystem basic test procedures - Part 2-4: Test procedures for digital systems - Bit-rate tolerance measurement

British Standards Institution (BSI), Magnification and specific capacity

BS EN 61788-5:2003 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
BS EN 61788-5:2001 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
BS EN 61788-5:2013 Superconductivity. Matrix to superconductor volume ratio measurement. Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
BS ISO 14164:1999 Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method
BS EN 61280-2-4:1998 Fibre optic communication subsystem basic test procedures. Test procedures for digital systems. Bit-rate tolerance measurement

Taiwan Provincial Standard of the People's Republic of China, Magnification and specific capacity

CNS 13984-1997 Methods of test for thermal diffusivity,specific heat capacity,and thermal conductivity of fine ceramics by laser flash method
CNS 14676.8-2004 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 8: Power frequency magnetic field immunity test
CNS 14676-8-2004 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 8: Power frequency magnetic field immunity test

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Magnification and specific capacity

GB/T 12968-1991 Eddy current decay method for measurement of resistivity and residual resistance ratio of pure metals
GB/T 23366-2009 Electrochemical performance test of lithium cobalt oxide.Test method for discharge plateau capacity ratio and cycle life
GB/T 23365-2023 Lithium cobalt oxide electrochemical performance test first discharge specific capacity and first charge and discharge efficiency test method
GB/T 23365-2009 Electrochemical performance test of lithium cobalt oxide.Test method for specific capacity and charge.discharge efficiency of the first cycle
GB/T 42161-2022 Electrochemical performance test of lithium iron phosphate—Test method for the initial discharge specific capacity and the initial efficiency
GB/T 43093-2023 Lithium nickel manganese oxide electrochemical performance test first discharge specific capacity and first charge and discharge efficiency test method

American Society for Testing and Materials (ASTM), Magnification and specific capacity

ASTM D5472/D5472M-20 Standard Practice for Determining Specific Capacity and Estimating Transmissivity at the Control Well
ASTM D5472-93(1999)e1 Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well
ASTM E434-10(2020) Standard Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation
ASTM E434-71(2002) Standard Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation
ASTM E434-10(2015) Standard Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation
ASTM E434-71(1996)e1 Standard Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation
ASTM E434-10 Standard Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation

Japanese Industrial Standards Committee (JISC), Magnification and specific capacity

JIS R 1611:1997 Test methods of thermal diffusivity, specific heat capacity, and thermal conductivity for fine ceramics by laser flash method
JIS R 1611:2010 Measurement methods of thermal diffusivity, specific heat capacity, and thermal conductivity for fine ceramics by flash method
JIS H 7304:2002 Superconductivity -- Part 5: Matrix to superconductor volume ratio measurement -- Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
JIS H 7304:2017 Superconductivity -- Matrix to superconductor volume ratio measurement -- Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires

European Committee for Electrotechnical Standardization（CENELEC）, Magnification and specific capacity

EN 61788-5:2013 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
EN 61788-5:2001 Superconductivity Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors

Association Francaise de Normalisation, Magnification and specific capacity

NF E51-260/A1*NF ISO 1217/A1:2016 Displacement compressors - Acceptances tests - Amendment 1 : calculation of isentropic efficiency and relationship with specific energy
NF ISO 1217/A1:2016 Compresseurs volumétriques - Essais de réception - Amendement 1 : calcul de du rendement isenthropique et relation avec l'énergie spécifique
NF X70-103:2010 Generation and analysis of toxic gases in fire - Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires.
NF Z84-567:2012 Broadband Radio Access Networks (BRAN) - 60 GHz Multiple-Gigabit WAS/RLAN Systems - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive (V1.2.1).
NF EN 61094-8:2013 Microphones de mesure - Partie 8 : méthodes pour la détermination de l'efficacité en champ libre par comparaison des microphones étalons de travail
NF EN 61280-2-4:1998 Procédures d'essai de base des sous-systèmes de télécommunications à fibres optiques - Partie 2-4 : procédures d'essai des systèmes numériques - Mesure de la tolérance sur le débit binaire.

RU-GOST R, Magnification and specific capacity

GOST 8.087-2000 State system for ensuring the uniformity of measurements. Standart dosimetric installations for X-ray and gamma-radiation. Methods of calibration on the exposure dose rate and air kerma rate
GOST R 50730.5-1995 Microwave ferrite devices. Methods of measurement of voltage standing wave ratio (VSWR) and maximum VSWR at high power level
GOST 21106.13-1978 Oscillator, modulator and regulation tubes with anode dissipated power above 25 W. Methods of measurement of direct interelectrode capacitances
GOST 31596-2012 Gas tightness of equipment and apparatus for gas welding, cutting and allied processes. Permissible rates of external gas leakage and measuring procedures
GOST R 51318.16.1.3-2007 Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-3. Radio disturbance and immunity measuring apparatus. Disturbance power measuring apparatus

国家市场监督管理总局、中国国家标准化管理委员会, Magnification and specific capacity

GB/T 39861-2021 Electrochemical performance test of lithium manganese oxide—Test method for discharge plateau capacity ratio and cycle life
GB/T 37207-2018 Electrochemical performance test of lithium nickel cobalt manganese oxide— Test method for discharge plateau capacity ratio and cycle life
GB/T 39864-2021 Electrochemical performance test of lithium manganese oxide—Test method for the initial specific discharge capacity and the initial efficiency
GB/T 37201-2018 Electrochemical performance test of lithium nickel cobalt manganese oxide —Test method for discharge specific capacity and charge-discharge coulombic efficiency of the first cycle

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Magnification and specific capacity

ASHRAE QC-06-010-2006 Relationship between Energy Wheel Speed and Effectiveness and its Transient Response@ Part II: Comparison Between Mathematical Model Predictions and Experimental Measurements and Uncertainty Analysis

CENELEC - European Committee for Electrotechnical Standardization, Magnification and specific capacity

EN 50361:2001 Basic Standard for the Measurement of Specific Absorption Rate Related to Human Exposure to Electromagnetic Fields from Mobile Phones (300 MHz - 3 GHz)

未注明发布机构, Magnification and specific capacity

BS EN 50361:2001 Basic standard for the measurement of Specific Absorption Rate related to human exposure to electromagnetic fields from mobile phones (300 MHz - 3 GHz)

Canadian Standards Association (CSA), Magnification and specific capacity

CSA ISO/IEC-17341-05-CAN/CSA:2005 Information technology Data Interchange on 120 mm and 80 mm optical disk using +RW format Capacity: 4,7 Gbytes and 1,46 Gbytes per side (Recording speed up to 4X) ISO/IEC 17341: 2005

Group Standards of the People's Republic of China, Magnification and specific capacity

T/CRAAS 439.3-2022 General ventilation filters -- Part 3: Determination of gravimetric efficiency and resistance in relation to test dust holding capacity

German Institute for Standardization, Magnification and specific capacity

DIN 19527:2012 Leaching of solid materials - Batch test for the examination of the leaching behaviour of organic substances at a liquid to solid ratio of 2 l/kg

International Organization for Standardization (ISO), Magnification and specific capacity

ISO 1133-2:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture