ZH
RU
ES

Capacity and Magnification

Capacity and Magnification, Total:262 items.

In the international standard classification, Capacity and Magnification involves: Optoelectronics. Laser equipment, Protection against fire, Bottles. Pots. Jars, Barrels. Drums. Canisters, Capacitors, Air quality, Semiconductor devices, Components and accessories for telecommunications equipment, Vocabularies, Metrology and measurement in general, Measurement of time, velocity, acceleration, angular velocity, Insulating materials, Electromagnetic compatibility (EMC), Conducting materials, Products of non-ferrous metals, Transport, Plastics, Rubber and plastics products, Electronic tubes, Installations in buildings, Radiocommunications, Electricity. Magnetism. Electrical and magnetic measurements, Thermodynamics and temperature measurements, Rubber, Insulating fluids, Fluid storage devices, Test conditions and procedures in general, Environmental testing, Vibration and shock with respect to human beings, Software development and system documentation, Linear and angular measurements, Radiation measurements, Telecommunication systems, Compressors and pneumatic machines, Construction materials, Protective equipment, Audio, video and audiovisual engineering, Ceramics, Commercial vehicles, Passenger cars. Caravans and light trailers, Nuclear energy engineering, Electromechanical components for electronic and telecommunications equipment, Acoustics and acoustic measurements, Vacuum technology, Solar energy engineering, Earthworks. Excavations. Foundation construction. Underground works, Data storage devices, Environmental protection, Office machines, Vibrations, shock and vibration measurements, Internal combustion engines, Testing of metals, Water quality, Labour. Employment, Earth-moving machinery, Electrical accessories, Power transmission and distribution networks, Non-ferrous metals, Organic chemicals, Measurement of volume, mass, density, viscosity, Quantities and units, Insulation, Electronic components in general, Measurement of fluid flow, Freight distribution of goods, Wastes, Products of the chemical industry, Farming and forestry, Television and radio broadcasting.

RU-GOST R, Capacity and Magnification

GOST 11612.8-1985 Photomultipliers. Measuring method of energy resolution
GOST 11612.13-1985 Photomultipliers. Method of measuring pulse response rise time and width
GOST 19656.9-1979 Semiconductor microwave varactors and multiplier diodes. Methods of measuring time constant and limiting frequency
GOST 19656.9-1974 Ultra-high frequency multiplication and parametric semiconductor diodes fixed time and limit frequency measurement methods
GOST 8.567-1999 State system for ensuring the uniformity of measurements. Time and frequency maesurements. Terms and definitions
GOST 28885-1990 Capacitors. Methods of measurements and tests
GOST 21106.13-1978 Oscillator, modulator and regulation tubes with anode dissipated power above 25 W. Methods of measurement of direct interelectrode capacitances
GOST 8.255-2003 State system for ensuring the uniformity of measurements. Electrical capacity measures. Verification procedure
GOST 8.255-1977 State system for ensuring the uniformity of measurements. Capasitance measures. Methods and means of calibration
GOST 12152-1966 Frequency characteristics meters and generators of fluctuating freqnency. Control methods
GOST R 51318.16.1.3-2007 Electromagnetic compatibility of technical equipment. Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-3. Radio disturbance and immunity measuring apparatus. Disturbance power measuring apparatus
GOST R IEC 60247-2013 Insulating liquids. Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity
GOST R 52231-2004 External noise of motor vehicles. Permissible levels and methods of measurement
GOST 8.070-1996 State system for ensuring unisormity of measurements. State verification schedule for means measuring absorbed and equivalent dases and rate of absorbed and equivalent doses of photon and electron radiations
GOST 8.070-1983 State system for ensuring the uniformity measurements. State primary standard of unit of absorbed dose rate of photon ionizing radiation
GOST R 51799-2001 High power radio frequency connectors. Basic parameters and technical requirements. Methods of tests and measurements
GOST 8.013-1972 State system for ensuring the uniformity of measurements. Condenser personnel dosimeters. Verification. Methods and means
GOST 8.153-1975 State system of ensuring the uniformity of measurement. Measuring condenser microphones. Methods and means of verification
GOST 25368-1982 Means for measurement of pulse laser radiation maximum power. Types and main parameters. Measuring methods
GOST R 51317.4.30-2008 Electric energy. Electromagnetic compatibility of technical equipment. Power quality measurement methods
GOST 8.087-2000 State system for ensuring the uniformity of measurements. Standart dosimetric installations for X-ray and gamma-radiation. Methods of calibration on the exposure dose rate and air kerma rate
GOST 8.564-1998 State system for ensuring the uniformity of measurement. State verification scheme for means of measuring electrical capacity in frequency range from 1 to 100 MHz
GOST R 8.623-2006 State system for ensuring the uniformity of measurements. Relative dielectric permittivity and the loss tangent of solid dielectrics. Procedures of measurements at microwave frequencies
GOST 19438.19-1978 Low-power electronic tubes. Measurement of microphone effect by method of shock excitation
GOST 19.401-1978 Unified system for program documentation. Text of program. Requirements to contents and form of presentation
GOST 30318-1995 Electromagnetic compatibility of technical means. Frequency bandwidth and off-band emission requirements of radiotransmitters. Test and control methods
GOST 16863-1971 Measuring generators for frequency range 0,1-35 MHz. Methods and means of verification
GOST R 53335-2009 Vacuum equipment. Positive-displacement vacuum pumps. Measurement of performance characteristics. Part 1. Measurement of volume rate of flow (pumping speed)
GOST R 8.711-2010 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of relative dielectric permittivity and the loss tangent in range of frequencies from 1 to 78,33 GHz
GOST 21106.5-1977 Oscillator, modulator and regulation tubes; anode dissipated power more than 25 W. Methods of measurement of filament current and voltage
GOST R 51097-1997 Electromagnetic compatibility of technical equipment. Radiofrequency disturbances from insulator sets and line fittings. Limits and measuring methods
GOST 18604.3-1980 Transistors bipolar. Methods for measuring collector and emitter capacitances
GOST R 50730.3-1995 Microwave ferrite devices. Methods of measurement of return losses and isolation at high power level
GOST R 8.562-2007 State system for ensuring the uniformity of measurements. State verification schedule for means measuring the power and voltage of electromagnetic waves
GOST R 8.562-1996 State system for ensuring the uniformity of measurements. State verification schedule for means measuring power of electromagnetic waves within frequency range from 0,03 to 37,50 GHz
GOST R 50657-1994 Electromagnetic compatibility of radioelectronic equipment. Radio transmitting devices of all types and purposes for national economic use. Limits for frequency tolerances. Measuring and monitoring methods

United States Navy, Capacity and Magnification

NAVY MIL-E-22285 NOTICE 1-1997 EXTINGUISHING SYSTEM, FIRE, AIRCRAFT, HIGH-RATE- DISCHARGE TYPE, INSTALLATION AND TEST OF
NAVY MIL-E-22285 (3)-1996 EXTINGUISHING SYSTEM, FIRE, AIRCRAFT, HIGH-RATE- DISCHARGE TYPE, INSTALLATION AND TEST OF
NAVY MIL-E-22285-1959 EXTINGUISHING SYSTEM, FIRE, AIRCRAFT, HIGH-RATE- DISCHARGE TYPE, INSTALLATION AND TEST OF
NAVY MIL-E-7016 F (1)-1981 ELECTRIC LOAD AND POWER SOURCE CAPACITY, AIRCRAFT, ANALYSIS OF
NAVY MIL-E-7016 F-1976 ELECTRIC LOAD AND POWER SOURCE CAPACITY, AIRCRAFT, ANALYSIS OF

International Telecommunication Union (ITU), Capacity and Magnification

ITU-T SERIES G SUPP 37-1998 ITU-T Recommendation G.763 Digital Circuit Multiplication Equipment (DCME) Tutorial and Dimensioning - Series G: Transmission Systems and Media Digital Systems and Networks Study Group 15; 22 pp
ITU-T E.528 FRENCH-1996 DIMENSIONING OF DIGITAL CIRCUIT MULTIPLICATION EQUIPMENT (DCME) SYSTEMS Study Group 2; 20 pp
ITU-T E.528 SPANISH-1996 DIMENSIONING OF DIGITAL CIRCUIT MULTIPLICATION EQUIPMENT (DCME) SYSTEMS Study Group 2; 20 pp
ITU-T E.528-1996 DIMENSIONING OF DIGITAL CIRCUIT MULTIPLICATION EQUIPMENT (DCME) SYSTEMS Study Group 2; 20 pp
ITU-R QUESTION 221-11-2007 Compatibility between radiocommunication systems and high data rate telecommunication systems using wired electrical power supply
ITU-R RESOLUTION 46-2000 Compatibility between radiocommunication systems and high data rate telecommunication systems using electricity power supply or telephone distribution wiring
ITU-R RESOLUTION 46 ARABIC-2000 Compatibility between radiocommunication systems and high data rate telecommunication systems using electricity power supply or telephone distribution wiring
ITU-R RESOLUTION 46 CHINESE-2000 Compatibility between radiocommunication systems and high data rate telecommunication systems using electricity power supply or telephone distribution wiring

German Institute for Standardization, Capacity and Magnification

DIN EN 13972:2003 Rigid plastics containers - Definition of nominal, brimful and total capacity and measurement of brimful and total capacity; German version EN 13972:2002
DIN 55540-1:1978-05 Testing of packaging; determining the filling ratio of standard capacity prepacks; prepacks whose contents are indicated by weight
DIN EN ISO 10545-3:1997 Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density (ISO 10545-3:1995, including Technical Corrigendum 1:1997); German version EN ISO 10545-3:1997
DIN EN 60247:2005 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan ) and d.c. resistivity (IEC 60247:2004); German version EN 60247:2004
DIN EN 2667-3:2019-12 Aerospace series - Non-metallic materials - Foaming structural adhesive films - Test methods - Part 3: Expansion ratio and volatile content; German and English version EN 2667-3:2019
DIN 43807:1983-10 Measuring and control; electrical measuring instruments; terminal markings for switchboard meters, panel meters and measuring transducers for the measurement of power and power factor
DIN EN 61620:1999 Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method (IEC 61620:1998); German version EN 61620:1999
DIN 1926-3:1974 Platform scales, railway scales, capacity, platform sizes
DIN 5485:1986 Principles of terminology for physical quantities; composition of terms with adjectives and substantives
DIN EN 300633:2001 Fixed radio systems - Point-to-point equipment - Low and medium capacity point-to-point digital radio systems operating in the frequency range 2,1 GHz to 2,6 GHz (Endorsement of the English version EN 300633 V 1.3.1 (2001-02) as German Standard)
DIN EN 300633:2001-10 Fixed radio systems - Point-to-point equipment - Low and medium capacity point-to-point digital radio systems operating in the frequency range 2,1 GHz to 2,6 GHz (Endorsement of the English version EN 300633 V 1.3.1 (2001-02) as German Standard) / Note...
DIN 55540-1:1978 Testing of packaging; determining the filling ratio of standard capacity prepacks; prepacks whose contents are indicated by weight

European Standard for Electrical and Electronic Components, Capacity and Magnification

CECC 30 801-805 ISSUE 1-1995 Fixed Tantalum Surface Mounting Capacitors with Solid Electrolyte, Porous Anode; Low ESR Range En

British Standards Institution (BSI), Capacity and Magnification

BS EN 13284-2:2005 Stationary source emissions - Determination of low range mass concentration of dust - Automated measuring systems
BS EN 13284-2:2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
BS EN 13284-1:2002 Stationary source emissions - Determination of low range mass concentration of dust - Manual gravimetric method
BS 2067:1953 Determination of power-factor and permittivity of insulating materials (Hartshorn & Ward method)
BS EN 61000-4-30:2003 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Power quality measurement methods
BS ISO 1827:2016 Rubber, vulcanized or thermoplastic. Determination of shear modulus and adhesion to rigid plates. Quadruple-shear methods
BS ISO 1827:2011 Rubber, vulcanized or thermoplastic. Determination of shear modulus and adhesion to rigid plates. Quadruple-shear methods
BS EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan ) and d.c. resistivity
PD IEC TR 61000-4-40:2020 Electromagnetic compatibility (EMC). Testing and measurement techniques. Digital methods for the measurement of power quantities of modulated or distorted signals
BS EN 61000-4-8:2010 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Power frequency magnetic field immunity test
BS ISO 21172-1:2015 Gas cylinders. Welded steel pressure drums up to 3 000 litres capacity for the transport of gases. Design and construction. Capacities up to 1 000 litres
BS 1728-17:1968 Methods for the analysis of aluminium and aluminium alloys - Determination of chromium (volumetric method)
BS 5711-5:1979 Methods of sampling and test for glycerol - Determination of alkalinity or acidity: volumetric method
BS EN 61788-5:2003 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
BS EN 61788-5:2001 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
BS EN 61788-5:2013 Superconductivity. Matrix to superconductor volume ratio measurement. Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
BS 1728-22:1972 Methods for the analysis of aluminium and aluminium alloys - Determination of magnesium (volumetric CDTA method)
BS EN ISO 11114-1:2020+A1:2023 Gas cylinders. Compatibility of cylinder and valve materials with gas contents - Metallic materials
BS EN 61000-4-28:2000 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Variation of power frequency, immunity test
BS ISO 14164:1999 Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method

Professional Standard - Electron, Capacity and Magnification

SJ 2534.16-1987 Test procedures for antennas--Measurement of power-capacity
SJ/Z 9096.1-1987 Method of measurement for radio transmitter Part 1: Measurement conditions, frequency, output power and power loss

IT-UNI, Capacity and Magnification

UNI 6808-1972

Professional Standard - Traffic, Capacity and Magnification

JT/T 7-1994 Ship cargo tank volume measurement and measurement
JT/T 7-2008 Measurement and calculation of the capacity of ships liquid cargotank

CN-STDBOOK, Capacity and Magnification

图书 A-4493 Ratiometric Theory and Practice

Association Francaise de Normalisation, Capacity and Magnification

NF X43-333-2*NF EN 13284-2:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 2 : quality assurance of automated measuring systems
NF T46-020:2012 Rubber, vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple-shear methods.
NF C27-210:1979 Measurement of relative permittivity dielectric dissipation factor and D.C. Resistivity of insulating liquids.
NF C27-210*NF EN 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan delta) and d.c.resistivity
NF E51-260/A1*NF ISO 1217/A1:2016 Displacement compressors - Acceptances tests - Amendment 1 : calculation of isentropic efficiency and relationship with specific energy
NF EN ISO 11260:2018 Qualité du sol - Détermination de la capacité d'échange cationique effective et du taux de saturation en bases échangeables à l'aide d'une solution de chlorure de baryum
NF Z84-567:2012 Broadband Radio Access Networks (BRAN) - 60 GHz Multiple-Gigabit WAS/RLAN Systems - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive (V1.2.1).

Professional Standard - Agriculture, Capacity and Magnification

NY/T 82.3-1988 Container Appearance and Minimum Filling Volume
JJF 2009-2016 Calibration system table for radio frequency and microwave power measuring instruments
NY 146.3-1988 Juice Determination Method Container Appearance and Minimum Filling Volume

Taiwan Provincial Standard of the People's Republic of China, Capacity and Magnification

CNS 14676.8-2004 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 8: Power frequency magnetic field immunity test
CNS 14676-8-2004 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 8: Power frequency magnetic field immunity test
CNS 14935-2005 Measurement of amplifier power gain and noise figure
CNS 13984-1997 Methods of test for thermal diffusivity,specific heat capacity,and thermal conductivity of fine ceramics by laser flash method
CNS 14676-1-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 1 : Overview
CNS 14676.1-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 1 : Overview
CNS 8830-1998 Method for determining neutron fluence rates/fluence and spectra by radioactivation techniques
CNS 13597-1995 Office Machines-Line and Character Capacity of Address Masters
CNS 14676.5-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 5 : Surge immunity test
CNS 14676-5-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 5 : Surge immunity test
CNS 14676-2-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 2 : Electrostatic discharge immunity test
CNS 14676.2-2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Part 2 : Electrostatic discharge immunity test
CNS 13306-2-2-2007 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power

Korean Agency for Technology and Standards (KATS), Capacity and Magnification

KS C IEC 61788-5:2002 Superconductivity-Part 5:Matrix to superconductor volume ratio measurement-Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
KS M ISO 1827:2009 Rubber, vulcanized or thermoplastic-Determination of modulus in shear or adhesion to rigid plates-Quadruple shear method
KS M ISO 1827:2014 Rubber, vulcanized or thermoplastic — Determination of modulus in shear or adhesion to rigid plates — Quadruple shear method
KS C 0269-1995(2000) ELECTROMAGNETIC COMPATIBILITY-TESTING AND MEASURMENT TECHNIQUES-POWER FREQUENCY MAGNETIC FIELD IMMUNITY TEST
KS C 0266-1995 Electromagnetic compatibility-Testing and measurement techniques-Surge immunity test
KS X ISO/IEC 17341:2007 Information technology - Data interchange on 120 mm and 80 mm optical disk using +RW format - Capacity: 4.7 Gbytes and 1.46 Gbytes per side (Recording speed up to 4X)
KS R ISO 15550-2013(2018) Internal combustion engines — Determination and method for the measurement of engine power — General requirements
KS C 0269-1995 Electromagnetic compatibility-Testing and measurement techniques-Power frequency magnetic field immunity test
KS C IEC 61000-4-33-2012(2017) Electromagnetic compatibility(EMC)－Part 4-33：Testing and measurement techniques－Measurement methods for high-power transient parameters
KS C IEC 61788-16:2020 Superconductivity — Part 16: Electronic characteristic measurements — Power-dependent surface resistance of superconductors at microwave frequencies
KS C IEC 61000-4-33:2021 Electromagnetic compatibility(EMC) — Part 4-33: Testing and measurement techniques — Measurement methods for high-power transient parameters
KS C IEC 61788-6:2002 Superconductivity - Part 6 : Mechanical properties measurement -Room temperature tensile test of Cu/Nb-Ti composite superconductors
KS C IEC 60512-25-1-2004(2009) Connectors for electronic equipment－Tests and measurements－Part 25－1：Test 25a－Crosstalk ratio

National Metrological Verification Regulations of the People's Republic of China, Capacity and Magnification

JJG 2009-2016 RF and Microwave Power Measuring Instruments
JJG 2009-1987 Verification Scheme of RF and Microwave Power Measuring Instruments

International Electrotechnical Commission (IEC), Capacity and Magnification

IEC White Paper RE-EES:2012 Grid integration of large-capacity Renewable Energy sources and use of large-capacity Electrical Energy Storage
IEC 61580-8:1996 Methods of measurement for waveguides - Part 8: Waveguide power holding capability
IEC 60247:1978 Measurement of relative permittivity, dielectric dissipation factor and d.c. resistivity of insulating liquids
IEC 61000-4-30:2003 Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques; Power quality measurement methods
IEC 60247:2004 Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan ) and d.c. resistivity
IEC 62562:2010 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
IEC 61788-4:2016 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
IEC 60358-2:2013 Coupling capacitors and capacitor dividers - Part 2: AC or DC single-phase coupling capacitor connected between line and ground for power line carrier-frequency (PLC) application
IEC TR 61000-4-40:2020 Electromagnetic compatibility (EMC) - Part 4-40: Testing and measurement techniques - Digital methods for the measurement of power quantities of modulated or distorted signals

Canadian Standards Association (CSA), Capacity and Magnification

CSA ISO/IEC-17341-05-CAN/CSA:2005 Information technology Data Interchange on 120 mm and 80 mm optical disk using +RW format Capacity: 4,7 Gbytes and 1,46 Gbytes per side (Recording speed up to 4X) ISO/IEC 17341: 2005
CSA CGA P.6-1993-1993 Testing Method for Measuring Thermal and Operating Efficiencies of Gas-Fired Pool Heaters First Edition
CSA IEC 61000-4-30-04-CAN/CSA:2004 Electromagnetic compatibility (EMC) Part 4-30: Testing and measurement techniques Power quality measurement methods First Edition
CSA IEC 61000-4-16-02-CAN/CSA:2002 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz First Edition; IEC 61000-4-16:1998
CSA IEC 61000-4-28-01-CAN/CSA:2001 Electromagnetic Compatibility (EMC) - Part 4-28: Testing and Measurement Techniques - Variation of Power Frequency, Immunity Test First Edition

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Capacity and Magnification

GB/T 32992-2016 Determination of gold adsorption capacity and rate of activated carbon

Military Standard of the People's Republic of China-General Armament Department, Capacity and Magnification

GJB 10181-2021 General Specifications for Large Capacity and High Power Lithium Primary Batteries

International Organization for Standardization (ISO), Capacity and Magnification

ISO 1827:1991 Rubber, vulcanized or thermoplastic; determination of moduls in shear or adhesion to rigid plates; quadruple shear method
ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
ISO 1827:2022 Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods
ISO 2151:1972 Measurement of airborne noise emitted by compressor/primemover-units intended for outdoor use (To be replaced by future ISO 3989 of TC 43)
ISO 1827:2007 Rubber, vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple-shear methods
ISO 1133-2:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture
ISO/IEC 29642:2009 Information technology - Data interchange on 120 mm and 80 mm optical disk using +RW DL format - Capacity: 8,55 Gbytes and 2,66 Gbytes per side (recording speed 2,4X)
ISO 1133-1:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
ISO/IEC 17341:2005 Information technology - Data interchange on 120 mm and 80 mm optical disk using +RW format - Capacity: 4,7 Gbytes and 1,46 Gbytes per side (Recording speed up to 4x)
ISO/IEC 17341:2009 Information technology - Data interchange on 120 mm and 80 mm optical disk using +RW format - Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed up to 4X)
ISO/IEC 17344:2009 Information technology - Data interchange on 120 mm and 80 mm optical disk using +R format - Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed up to 16X)
ISO 21927-10:2011 Smoke and heat control systems - Part 10: Specification for power output devices
ISO/IEC 26925:2006 Information technology - Digital storage media for information interchange - Data Interchange on 120 mm and 80 mm Optical Disk using +RW HS Format - Capacity: 4,7 and 1,46 Gbytes per Side (Recording speed 8X)
ISO/IEC 26925:2009 Information technology - Data interchange on 120 mm and 80 mm optical disk using +RW HS format - Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed 8X)

Group Standards of the People's Republic of China, Capacity and Magnification

T/CRAAS 439.3-2022 General ventilation filters -- Part 3: Determination of gravimetric efficiency and resistance in relation to test dust holding capacity
T/EERT 013-2021 Regulation of water environmental capacity and pollution load allocation in small and medium-sized towns

API - American Petroleum Institute, Capacity and Magnification

API PAPER-906-14-K-1969 WATERFLOOD CORRELATION TO FORECAST RATE AND RESERVES

ESDU - Engineering Sciences Data Unit, Capacity and Magnification

ESDU 70023 A-1982 The measurement and analysis of climb and excess power performance.
ESDU 68023-1978 Thermal conductivity@ viscosity@ heat capacity@ density and Prandtl number of solid@ liquid and gaseous heavy water.

International Commission on Illumination (CIE), Capacity and Magnification

CIE X039-2014 PROCEEDINGS of CIE 2014 "Lighting Quality and Energy Efficiency”

American Society for Testing and Materials (ASTM), Capacity and Magnification

ASTM E457-96 Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM E457-96(2002) Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM E457-08 Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM E457-08(2015) Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM E457-08(2020) Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM E434-10(2020) Standard Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation
ASTM E434-71(2002) Standard Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation
ASTM D4404-84(2004) Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry
ASTM D4404-84(1998)e1 Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry
ASTM D5568-14 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Waveguide
ASTM D7449/D7449M-14 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Air Line
ASTM D5472/D5472M-20 Standard Practice for Determining Specific Capacity and Estimating Transmissivity at the Control Well
ASTM E434-10(2015) Standard Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation
ASTM D5472-93(1999)e1 Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well
ASTM C559-90(2000) Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Capacity and Magnification

GB/T 18443.3-2001 Testing method of cryo-insulation pressure vessels leakage measurement
GB/T 26915-2011 Determination of energy conversion efficiency and quantum yield for hydrogen production in the solar photocatalytic water splitting system
GB/T 6587.8-1986 Line frequency and voltage tests for electronic measuring instruments
GB/T 18703-2002 Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
GB/T 29835.2-2013 Efficiency of system and software.Part 2:Metric method
GB/T 7777-2003 Measurement and evaluation of mechanical vibration of displacement compressors
GB/T 10254-1988 Calibration for radiation protection instruments beta doseratemeters
GB/T 5654-2007 Insulating liquids.Measurement of relative permittivity,dielectric dissipation factor and d.c.resistivity
GBJ 88-1985 Measurement of sound-absorbing coefficient and sound-resistance rate by method of standing wave tubes
GB/T 18443.4-2001 Testing method of cryo-insulation pressure vessels leak and outgassing rate measurement
GB/T 18443.5-2001 Testing method of cryo-insulation pressure vessels static vaporation rate measurement
GB/T 19956.1-2005 Positive-displacement vacuum pumps.Measurement of performance characteristics.Part 1:Measurement of volume rate of flow (pumping speed)
GB/T 8994-1988 Calibration for radiation protection instruments X and gamma exposure rate meters
GB/T 11683-1989 High range X,gamma and beta radiation dose and dose rate portable instrument for emergency radiation protection purposes
GB/Z 17626.33-2023 Electromagnetic Compatibility Testing and Measurement Techniques Part 33: Measurement Methods of High Power Transient Parameters
GB/T 12968-1991 Eddy current decay method for measurement of resistivity and residual resistance ratio of pure metals
GB/T 17626.28-2006 Electromagnetic compatibility Testing and measurement techniques Variation of power frequency, immunity test

European Committee for Electrotechnical Standardization（CENELEC）, Capacity and Magnification

EN 61580-8:1996 Methods of Measurement for Waveguides Part 8: Waveguide Power Holding Capability
EN 61040:1992 Power and Energy Measuring Detectors, Instruments and Equipment for Laser Radiation
EN 60247:2004 Insulating liquids Measurement of relative permittivity, dielectric dissipation factor (tan $) and d.c. resistivity

American National Standards Institute （ANSI), Capacity and Magnification

ANSI/ASTM D5568:2008 Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies
ANSI/ATIS 1000631-2005 Signaling System No. 7 (SS7) - High Probability of Completion (HPC) Network Capability
ANSI/ASTM C559:2000 Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Capacity and Magnification

ASHRAE AT-96-13-1996 Advances in Measurement and Evaluation of Thermal Distribution System Efficiency
ASHRAE QC-06-009-2006 Relationship between Energy Wheel Speed and Effectiveness and its Transient Response@ Part 1: Mathematical Development of the Characteristic Time Constants and Their Relationship with Effectiveness
ASHRAE QC-06-010-2006 Relationship between Energy Wheel Speed and Effectiveness and its Transient Response@ Part II: Comparison Between Mathematical Model Predictions and Experimental Measurements and Uncertainty Analysis

Professional Standard - Machinery, Capacity and Magnification

JB/T 6860-1993 Power and energy measuring detectors, instruments and equipment for laser radiation
JB/T 8063.1-1996 Method for chemical analysis of powder metallurgy materials and products Determination of carbon in iron-based materials and products (gas volumetric method)

Professional Standard - Nuclear Industry, Capacity and Magnification

EJ/T 1011-1996 Fixed neutron dose equivalent rate meter, alarm device and monitor
EJ/Z 4-1978 Vacuum leak test rules for containers and equipment with helium hood method
EJ/T 581-1991 The characteristics and test methods of the parts matched with the count rate meter in the count rate measurement system

国家市场监督管理总局、中国国家标准化管理委员会, Capacity and Magnification

GB/T 7777-2021 Measurement and evaluation of mechanical vibration of displacement compressors
GB/T 18703-2021 Mechanical vibration and shock—Hand-arm vibration—Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand

BE-NBN, Capacity and Magnification

NBN-ISO 1827:1994 Rubber, vulcanized or thermoplastic. Determination of modulus in shear or adhesion to rigid plates. Quadruple shear method

National Metrological Technical Specifications of the People's Republic of China, Capacity and Magnification

JJF 1261.23-2017 Rules of Metrology Testing for Energy Efficiency of Displacement Air Compressors

ZA-SANS, Capacity and Magnification

SANS 61000-4-30:2003 Electromagnetic compatibility (EMC) Part 4-30: Testing and measurement techniques - Power quality measurement methods
SANS 61000-4-30:2009 Electromagnetic compatibility (EMC) Part 4-30: Testing and measurement techniques - Power quality measurement methods

GOSTR, Capacity and Magnification

GOST 34626-2019 Locomotives and self-propelled special railway stock. Methods to determine efficiency and power capacity coefficient

Institute of Electrical and Electronics Engineers (IEEE), Capacity and Magnification

IEEE Std C63.19-2006 Method of Measurement for Hearing Aid Compatibility with Wireless Communications
ANSI C63.19-2007 American National Standard Methods of Measurement for Hearing Aid Compatibility with Wireless Communications

AENOR, Capacity and Magnification

UNE 49354:1986 AEROSOL CONTAINERS. MEASURING PARALLELITY OF THE BEAD WITH THE BOTTOM

Defense Logistics Agency, Capacity and Magnification

DLA SMD-5962-86871 REV D-2006 MICROCIRCUITS, DIGITAL, BIPOLAR, ADVANCED LOW POWER SCHOTTKY TTL, QUADRUPLE 2-INPUT POSITIVE NAND BUFFERS, MONOLITHIC SILICON
DLA SMD-5962-95652 REV C-2000 MICROCIRCUIT, DIGITAL, RADIATION HARDENED, ADVANCED CMOS, TRIPLE THREE-INPUT NAND GATE, MONOLITHIC SILICON

ES-UNE, Capacity and Magnification

UNE-EN 2667-3:2019 Aerospace series - Non-metallic materials - Foaming structural adhesive films - Test methods - Part 3: Expansion ratio and volatile content (Endorsed by Asociación Española de Normalización in October of 2019.)

IX-FAO, Capacity and Magnification

CAC/GL 37-2001(Ch) Recovery information in analytical measurements and IUPAC consistency guidelines
CAC/GL 37-2001(En) Recovery information in analytical measurements and IUPAC consistency guidelines

SE-SIS, Capacity and Magnification

SIS SEN 08 01 03-1966 Lead-acid accumulators. Checking the 10-hour-rate capacity of stationary batteries

Japanese Industrial Standards Committee (JISC), Capacity and Magnification

JIS R 1611:1997 Test methods of thermal diffusivity, specific heat capacity, and thermal conductivity for fine ceramics by laser flash method
JIS R 1611:2010 Measurement methods of thermal diffusivity, specific heat capacity, and thermal conductivity for fine ceramics by flash method

US-CFR-file, Capacity and Magnification

CFR 19-10.2015-2013 Customs Duties. Part10:Articles conditionally free,subject to a reduced rate,etc. Section10.2015:Regional value content.

CZ-CSN, Capacity and Magnification

CSN 64 0115-1976 Determination of the permeability of lastics and vulcanized rubber to gases constant volume method)
CSN 72 1565 Cast.6-1985 Testing of brick clays. Determination of the weight loss by burning, of the water intake, apparent porosity and bulk density

Professional Standard - Energy, Capacity and Magnification

NB/T 20576-2019 Analysis of Neutron Flux Rate of Reactor Pressure Vessel in PWR Nuclear Power Plant
NB/T 20161-2012 Installation and commissioning technical guideline for ex-core neutron flux measuring system for pressurized water reactor of nuclear power plants
NB/T 20161-2021 Technical regulations for installation and testing of external neutron fluence rate measurement system for pressurized water reactor nuclear power plants

U.S. Air Force, Capacity and Magnification

AIR FORCE MIL-T-9720 F NOTICE 1-1995 TRUCK, LIFT, AERIAL STORES, 3000 POUNDS CAPACITY MJ-1A AND MJ-1B
AIR FORCE MIL-T-9720 F-1984 TRUCK, LIFT, AERIAL STORES, 3000 POUNDS CAPACITY MJ-1A AND MJ-1B

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Capacity and Magnification

IEEE C63.19-2001 Methods of Measurement of Compatibility between Wireless Communication Devices and Hearing Aids
IEEE C63.19-2006 Methods of Measurement of Compatibility between Wireless Communication Devices and Hearing Aids
IEEE C63.19-2007 Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids

Guizhou Provincial Standard of the People's Republic of China, Capacity and Magnification

DB5206/T 125-2020 Cultivation technology and quality classification of camellia oleifera light substrate container seedlings

工业和信息化部, Capacity and Magnification

YD/T 2829-2015 Electromagnetic compatibility requirements and measurement methods for sensing layer equipment

Professional Standard - Aerospace, Capacity and Magnification

QJ 2717.4-1996 Measuring Method of Mode Shape Slope in Modal Test of Missile and Launch Vehicle

Danish Standards Foundation, Capacity and Magnification

DS/EN ISO 10819:2013 Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
DS/IEC 61000-4-33:2007 Electromagnetic compatibility (EMC) - Part 4-33: Testing and measurement techniques - Measurement methods for high-power transient parameters

Professional Standard - Petroleum, Capacity and Magnification

SY/T 6612-2005 The figures & tables with their format for the report of proved oil and gas reserves

IN-BIS, Capacity and Magnification

IS 5776-1988

Ningxia Provincial Standard of the People's Republic of China, Capacity and Magnification

DB64/T 882-2013 Guidelines for Risk Assessment and Safety Capacity Analysis of Chemical Industry Parks (Agglomeration Areas)

Society of Automotive Engineers (SAE), Capacity and Magnification

SAE J/ISO 9248-2003 Earth-moving machinery Units for dimensions, performance and capacities, and their measurement accuracies Identical to ISO 9248:1992

European Telecommunications Standards Institute (ETSI), Capacity and Magnification

ETSI ETR 019-1991 Transmission and Multiplexing Specification of New Generation High-Capacity Digital Radio Systems
ETSI EN 300 220-1-2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW; Part 1: Technical characteristics and test methods (V2

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Capacity and Magnification

QUESTION 221-1/1-2007 Compatibility between radiocommunication systems and high data rate telecommunication systems using wired electrical power supply
RESOLUTION 46-2000 Compatibility between radiocommunication systems and high data rate telecommunication systems using electricity power supply or telephone distribution wiring

KR-KS, Capacity and Magnification

KS C IEC 61788-16-2020 Superconductivity — Part 16: Electronic characteristic measurements — Power-dependent surface resistance of superconductors at microwave frequencies
KS C IEC 61000-4-33-2021 Electromagnetic compatibility(EMC) — Part 4-33: Testing and measurement techniques — Measurement methods for high-power transient parameters

American Society of Mechanical Engineers (ASME), Capacity and Magnification

ASME 2303-2001 Alternative Quality Control Test Frequency, Class I Fiber Reinforced Plastic Pressure Vessels Section X

European Committee for Standardization (CEN), Capacity and Magnification

EN 840-2:2012 Mobile waste and recycling containers - Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s)@ for trunnion and/or comb lifting devices - Dimensions and design
EN 840-4:2012 Mobile waste and recycling containers - Part 4: Containers with 4 wheels with a capacity up to 1700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices - Dimensions and design
EN 840-4:2020 Mobile waste and recycling containers - Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices - Dimensions and design
EN 840-2:2020 Mobile waste and recycling containers - Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s)@ for trunnion and/or comb lifting devices - Dimensions and design
EN 840-2:1997 Mobile Waste Containers - Part 2: Containers with Four Wheels with a Capacity from 500 l to 1200 l with Flat Lid(s), for Trunnion and/or Comb Lifting Devices - Dimensions and Design
EN 840-4:1997 Mobile Waste Containers - Part 4: Containers with Four Wheels with a Capacity from 750 l to 1700 l with Flat Lid(s), for Wide Trunnion or BG-and/or Wide Comb Lifting Device - Dimensions and Design
EN ISO 16911-2:2013 Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 2: Automated measuring systems

Professional Standard - Forestry, Capacity and Magnification

LY/T 1734.2-2008 Planting technical specification and product quality grade for ornamental Palmae.Part 2:Containers cultivation

PT-IPQ, Capacity and Magnification

NP EN ISO 10545-3:2001 Ceramic tiles Part 3:Determination of water absorption,apparent porosity,apparent relative density and bulk density(ISO 10545-3:1995,including Technical Corrigendum 1:1997)