ZH
RU
ES

fracture toughness of asphalt mixture

fracture toughness of asphalt mixture, Total:338 items.

In the international standard classification, fracture toughness of asphalt mixture involves: Construction materials, Waxes, bituminous materials and other petroleum products, Road engineering, Civil engineering in general, Cutting tools, Construction of airports, Test conditions and procedures in general, Rubber and plastics products, Reinforced plastics, Mechanical testing, Road vehicles in general, Road vehicle systems, Vocabularies, Plastics.

British Standards Institution (BSI), fracture toughness of asphalt mixture

BS PD CEN/TS 15963:2014 Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS DD CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS EN 13075-2:2016 Bitumen and bituminous binders. Determination of breaking behaviour. Determination of fines mixing time of cationic bituminous emulsions
BS EN 12697-43:2014 Bituminous mixtures. Test methods for hot mix asphalt. Resistance to fuel
BS EN 12697-43:2005 Bituminous mixtures - Test methods for hot mix asphalt - Resistance to fuel
BS EN 12697-10:2001 Bituminous mixtures — Test methods for hot mix asphalt — Part 10: Compactibility
BS EN 12697-10:2002 Bituminous mixtures - Test methods for hot mix asphalt - Compactibility
BS EN 13075-1:2016 Tracked Changes. Bitumen and bituminous binders. Determination of breaking behaviour. Determination of breaking value of cationic bituminous emulsions, mineral filler method
BS EN 12697-8:2003 Bituminous mixtures - Test methods for hot mix asphalt - Determination of void characteristics of bituminous specimens
BS EN 12697-44:2010 Bituminous mixtures. Test methods for hot mix asphalt. Crack propagation by semi-circular bending test
BS EN 12697-11:2012 Bituminous mixtures. Test methods for hot mix asphalt. Determination of the affinity between aggregate and bitumen
BS EN 12697-11:2005 Bituminous mixtures — Test methods for hot mix asphalt — Part 11: Determination of the affinity between aggregate and bitumen
BS EN 12697-24:2012 Bituminous mixtures. Test methods for hot mix asphalt. Resistance to fatigue
BS EN 12697-24:2004 Bituminous mixtures - Test methods for hot mix asphalt - Resistance to fatigue
BS EN 12697-11:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 11:Determination of the affinity between aggregate and bitumen
BS EN 13075-2:2009 Bitumen and bituminous binders - Determination of breaking behaviour - Part 2:Determination of fines mixing time of cationic bitumen emulsions
BS EN 12697-12:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 12:Determination of the water sensitivity of bituminous specimens
BS EN 12697-19:2012 Bituminous mixtures. Test methods for hot mix asphalt. Permeability of specimen
BS EN 12697-19:2004 Bituminous mixtures - Test methods for hot mix asphalt - Permeabilty of specimen
BS EN 12697-15:2003 Bituminous mixtures - Test methods for hot mix asphalt - Determination of the segregation sensitivity
BS EN 12697-15:2022 Bituminous mixtures - Test methods for hot mix asphalt - Determination of the segregation sensitivity
BS EN 12697-46:2012 Bituminous mixtures. Test methods for hot mix asphalt. Low temperature cracking and properties by uniaxial tension tests
BS EN 12697-37:2003 Bituminous mixtures - Test methods for hot mix asphalt - Hot sand test for the adhesivity of binder on precoated chippings for HRA
BS EN 12697-16:2004 Bituminous mixtures - Test methods for hot mix asphalt - Abrasion by studded tyres
BS EN 12697-41:2013 Bituminous mixtures. Test methods for hot mix asphalt. Resistance to de-icing fluids
BS PD CEN/TS 12697-50:2016 Bituminous mixtures. Test methods. Resistance to scuffing
BS PD CEN/TS 12697-50:2018 Bituminous mixtures. Test methods. Resistance to scuffing
BS EN 13075-1:2009 Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method
BS ISO 15024:2023 Fibre-reinforced plastic composites. Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials
BS ISO 15024:2002 Fibre-reinforced plastic composites. Determination of mode I interlaminar fracture toughness, $iGic, for unidirectionally reinforced materials
BS EN 12697-46:2020 Tracked Changes. Bituminous mixtures. Test methods. Low temperature cracking and properties by uniaxial tension tests
BS EN 1744-4:2005 Tests for chemical properties of aggregates - Determination of water susceptibility of fillers for bituminous mixtures
BS EN 1744-4:2021 Tests for chemical properties of aggregates - Determination of water susceptibility of fillers for bituminous mixtures
18/30382734 DC BS EN 12697-46. Bituminous mixtures. Test methods. Part 46. Low temperature cracking and properties by uniaxial tension tests
20/30384113 DC BS EN 1744-4. Tests for chemical properties of aggregates. Part 4. Determination of water susceptibility of fillers for bituminous mixtures

AASHTO - American Association of State Highway and Transportation Officials, fracture toughness of asphalt mixture

TP 124-2018 Standard Method of Test for Determining the Fracture Potential of Asphalt Mixtures Using the Flexibility Index Test (FIT)
TP 105-2013 Standard Method of Test for Determining the Fracture Energy of Asphalt Mixtures Using the Semicircular Bend Geometry (SCB)
PP 61-2013 Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
TP 79-2013 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
TP 79-2015 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
PP 61-2009 Standard Practice for Developing Dynamic Modulus Master Curves for Hot Mix Asphalt (HMA) Using the Asphalt Mixture Performance Tester (AMPT)
TP 79-2009 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt (HMA) Using the Asphalt Mixture Performance Tester (AMPT)
TP 79-2012 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt (HMA) Using the Asphalt Mixture Performance Tester (AMPT)
TP 79-2011 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt: (HMA) Using the Asphalt Mixture Performance Tester (AMPT)
T 314-2012 Standard Method of Test for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
T 314-2006 Standard Method of Test for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
T 314-2007 Standard Method of Test for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
TP3-1998 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
TP3-1996 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
T 314-2002 Standard Method of Test for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
PP 61-2010 Standard Practice for Developing Dynamic Modulus Master Curves for Hot Mix Asphalt (HMA) Using the Asphalt Mixture Performance Tester (AMPT) (Revision 1)
TP 124-2016 Standard Method of Test for Determining the Fracture Potential of Asphalt Mixtures Using Semicircular Bend Geometry (SCB) at Intermediate Temperature
TP 79-2010 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt: (HMA) Using the Asphalt Mixture Performance Tester (AMPT) (Revision 1)
TP3-2000 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT) (2000 Edition)
TP3-1993 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT) (Edition 1B)
T 305-2014 Standard Method of Test for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
T 305-2009 Standard Method of Test for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures

Korean Agency for Technology and Standards (KATS), fracture toughness of asphalt mixture

KS F 2488-2006 Standard test method for toughness and tenacity of modified asphalt binder
KS F 2488-2016 Standard test method for toughness and tenacity of modified asphalt binder
KS F 2494-2007 Standard test method of the laboratory permeability test for
KS F 2487-2013 Standard test method for preparation of asphalt mixture specimens for performance testing
KS F 2337-2017 Testing method for marshall stability and flow of asphalt mixtures using marshall apparatus
KS F 2337-1995 Testing methods for resistance to plastic flow of bituminous mixtures using marshall apparatus

German Institute for Standardization, fracture toughness of asphalt mixture

DIN EN 12593:2015-09 Bitumen and bituminous binders - Determination of the Fraass breaking point; German version EN 12593:2015
DIN EN 13075-1:2017-02 Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method; German version EN 13075-1:2016
DIN EN 13075-2 Berichtigung 1:2007 Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bitumen emulsions; Corrigenda to DIN EN 13075-2:2002-10
DIN EN 16346:2022 Bitumen and bituminous binders - Determination of breaking behaviour and immediate adhesivity of cationic bituminous emulsions; German and English version prEN 16346:2022
DIN EN 13075-1:2017 Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method; German version EN 13075-1:2016
DIN EN 13075-1:2013 Bitumen and bituminous binders.Determination of breaking behaviour.Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method; German version EN 13075-1:2009
DIN EN 13075-1:2009 Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method; English version of DIN EN 13075-1:2009-07
DIN SPEC 1026:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen; German version CEN/TS 15963:2010
DIN EN 12697-44:2017 Bituminous mixtures - Test methods for hot mix asphalt - Part 44: Crack propagation by semi-circular bending test; German and English version prEN 12697-44:2017
DIN EN 13075-2:2002 Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bitumen emulsions; German version EN 13075-2:2002
DIN EN 13075-2:2017 Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions; German version EN 13075-2:2016
DIN EN 12697-43:2005 Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel; German version EN 12697-43:2005
DIN CEN/TS 16346:2012-12*DIN SPEC 51146:2012-12 Bituminous binders - Determination of breaking behaviour and immediate adhesivity of cationic bituminous emulsions with 2/4 mm aggregate; German version CEN/TS 16346:2012 / Note: To be replaced by DIN EN 16346 (2022-10).
DIN EN 12697-12:2008 Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens; English version of DIN EN 12697-12:2008-10
DIN EN 15813:2011-06 Polymer modified bituminous thick coatings for waterproofing - Determination of flexibility at low temperatures; German version EN 15813:2011
DIN EN 13075-2:2009 Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions; English version of DIN EN 13075-2:2009-07
DIN EN 12697-15:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 15: Determination of the segregation sensitivity; German version EN 12697-15:2003
DIN EN 12697-37:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA; German version EN 12697-37:2003
DIN EN 12697-43:2021 Bituminous mixtures - Test methods - Part 43: Resistance to fuel; German and English version prEN 12697-43:2021
DIN EN 12697-43:2014 Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel; German version EN 12697-43:2014
DIN EN 12697-46:2020 Bituminous mixtures - Test methods - Part 46: Low temperature cracking and properties by uniaxial tension tests
DIN CEN/TS 16346:2012 Bituminous binders - Determination of breaking behaviour and immediate adhesivity of cationic bituminous emulsions with 2/4 mm aggregate; German version CEN/TS 16346:2012
DIN EN 12697-10:2018 Bituminous mixtures - Test methods - Part 10: Compactability
DIN EN 12697-46:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 46: Low temperature cracking and properties by uniaxial tension tests; German version EN 12697-46:2012
DIN EN 12697-44:2019 Bituminous mixtures - Test methods - Part 44: Crack propagation by semi-circular bending test
DIN EN 12697-24:2018 Bituminous mixtures - Test methods - Part 24: Resistance to fatigue
DIN EN 12697-43:2023-07 Bituminous mixtures - Test methods - Part 43: Resistance to fuel; German version EN 12697-43:2023
DIN EN 12697-40:2020 Bituminous mixtures - Test methods - Part 40: In situ drainability
DIN EN 12697-1:2020 Bituminous mixtures - Test methods - Part 1: Soluble binder content
DIN EN 12697-19:2020 Bituminous mixtures - Test methods - Part 19: Permeability of specimen
DIN EN 1744-4:2022 Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures
DIN EN 1744-4:2022-03 Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures; German version EN 1744-4:2021
DIN EN 12697-37:2020 Bituminous mixtures - Test methods - Part 37: Hot sand test for the adhesivity of binder on pre-coated chippings for Hot-Rolled-Asphalt (HRA); German and English version prEN 12697-37:2020
DIN EN 12697-41:2014 Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids; German version EN 12697-41:2013
DIN EN 12697-46:2020-05 Bituminous mixtures - Test methods - Part 46: Low temperature cracking and properties by uniaxial tension tests; German version EN 12697-46:2020
DIN EN 12697-15:2022 Bituminous mixtures - Test methods - Part 15: Determination of the segregation sensitivity
DIN EN 12697-15:2020 Bituminous mixtures - Test methods - Part 15: Determination of the segregation sensitivity; German and English version prEN 12697-15:2020
DIN EN 12697-15:2022-04 Bituminous mixtures - Test methods - Part 15: Determination of the segregation sensitivity; German version EN 12697-15:2022
DIN EN 12697-37:2022 Bituminous mixtures - Test methods - Part 37: Hot sand test for the adhesivity of binder on pre-coated chippings for Hot-Rolled-Asphalt (HRA)

ES-UNE, fracture toughness of asphalt mixture

UNE-EN 12593:2015 Bitumen and bituminous binders - Determination of the Fraass breaking point
UNE-EN 13075-1:2017 Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method
UNE-EN 12697-46:2022 Bituminous mixtures - Test methods - Part 46: Low temperature cracking and properties by uniaxial tension tests

未注明发布机构, fracture toughness of asphalt mixture

DIN EN 12593:2000 Bitumen and bituminous binders Determination of the breaking point according to Fraaß
BS PD CEN TS 15963:2014 Bitumen and bituminous binders — Determination of the fracture toughness temperature by a three point bending test on a notched specimen

Danish Standards Foundation, fracture toughness of asphalt mixture

DS/CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
DS/EN 13075-1:2009 Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method
DS/EN 13075-2:2009 Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions
DS/EN 12697-46:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 46: Low temperature cracking and properties by uniaxial tension tests
DS/EN 12697-43:2005 Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel
DS/EN 12697-10/AC:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 10: Compactability
DS/EN 12697-10:2002 Bituminous mixtures - Test methods for hot mix asphalt - Part 10: Compactability
DS/EN 12697-44:2011 Bituminous mixtures - Test methods for hot mix asphalt - Part 44: Crack propagation by semi-circular bending test
DS/EN 12697-24:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to fatigue
DS/EN 12697-8:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 8: Determination of void characteristics of bituminous specimens
DS/EN 12697-12:2008 Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens
DS/CEN/TS 16346:2013 Bituminous binders - Determination of breaking behaviour and immediate adhesivity of cationic bituminous emulsions with 2/4 mm aggregate
DS/EN 12697-41:2005 Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids
DS/EN 12697-40:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 40: In situ drainability
DS/EN 12697-19:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 19: Permeability of specimen
DS/EN 12697-1:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 1: Soluble binder content
DS/EN 12697-15:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 15: Determination of the segregation sensitivity
DS/EN 12697-37:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA
DS/EN 1744-4:2006 Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures

Association Francaise de Normalisation, fracture toughness of asphalt mixture

XP T66-078*XP CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
NF T66-017-1:2009 Bitumen and bituminous binders - Determination of breaking behaviour - Part 1 : determination of breaking value of cationic bituminous emulsions, mineral filler method.
NF T66-017-1*NF EN 13075-1:2016 Bitumen and bituminous binders - Determination of breaking behaviour - Part 1 : determination of breaking value of cationic bituminous emulsions, mineral filler method
NF T66-017-2:2009 Bitumen and bituminous binders - Determination of breaking behaviour - Part 2 : determination of fines mixing time of cationic bitumen emulsions.
NF T66-017-2*NF EN 13075-2:2016 Bitumen and bituminous binders - Determination of breaking behaviour - Part 2 : determination of fines mixing time of cationic bituminous emulsions
NF EN 13075-1:2016 Bitumes et liants bitumineux - Détermination du comportement à la rupture - Partie 1 : détermination de l'indice de rupture des émulsions cationiques de bitume, méthode des fines minérales
XP CEN/TS 16346:2013 Bitumes et liants bitumineux - Détermination du comportement à la rupture et de l'adhésivité immédiate des émulsions cationiques de bitume avec un granulat de 2/4 mm
XP T66-071*XP CEN/TS 16346:2013 Bitumen und bituminous binders - Determination of breaking behaviour and immediate adhesivity of cationic bituminous emulsions with 2/4 mm aggregate
NF P98-818-43:2005 Asphalt - Pr?Bituminous mixtures - Test methods for hot mix asphalt - Part 43 : resistance to fuel.
NF P98-818-44:2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 44 : crack propagation by semi-circular bending test.
NF P98-818-43*NF EN 12697-43:2014 Bituminous mixtures - Test methods for hot mix asphalt - Part 43 : resistance to fuel
XP CEN/TS 12697-50:2020 Mélanges bitumineux - Méthodes d'essai - Partie 50 : résistance aux arrachements superficiels
NF EN 15813:2011 Revêtements bitumineux épais modifiés aux polymères pour imperméabilisation - Détermination de la souplesse à basse température
NF P98-818-46:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 46: low temperature cracking and properties by uniaxial tension tests
NF P98-818-41*NF EN 12697-41:2014 Bituminous mixtures - Test methods for hot mix asphalt - Part 41 : resistance to de-icing fluids
NF P98-134:2000 Bituminous mixes - Wearing courses : porous asphalts - Definition - Classification - Characteristics - Manufacturing - Laying.
NF P98-818-46*NF EN 12697-46:2020 Bituminous mixtures - Test methods - Part 46 : low temperature cracking and properties by uniaxial tension tests
NF P98-818-10*NF EN 12697-10:2017 Bituminous mixtures - Test methods - Part 10 : compactability
XP P98-818-50*XP CEN/TS 12697-50:2020 Bituminous mixtures - Test methods - Part 50 : resistance to scuffing
NF P98-818-24*NF EN 12697-24:2018 Bituminous mixtures - Test methods - Part 24 : resistance to fatigue
NF EN 12697-43:2023 Mélanges bitumineux - Méthodes d'essais - Partie 43 : résistance aux carburants
NF EN 15812:2011 Revêtements bitumineux épais modifiés aux polymères pour imperméabilisation - Détermination de l'aptitude à ponter les fissures
NF P98-818-19*NF EN 12697-19:2020 Bituminous mixtures - Test methods - Part 19 : permeability of specimen
NF P18-660-4*NF EN 1744-4:2021 Tests for chemical properties of aggregates - Part 4 : determination of water susceptibility of fillers for bituminous mixtures
NF P98-818-37*NF EN 12697-37:2022 Bituminous mixtures - Test methods - Part 37 : hot sand test for the adhesivity of binder on pre-coated chippings for Hot-Rolled Asphalt (HRA)
NF EN 12697-46:2020 Mélanges bitumineux - Méthodes d'essai - Partie 46 : fissuration et propriétés à basse température par des essais de traction uniaxiale
NF ISO 15024:2002 Composites plastiques renforcés de fibres - Détermination de la ténacité à la rupture interlaminaire en mode I, Gic, de matériaux composites à matrice polymère renforcés de fibres unidirectionnelles
NF P98-256-1:1991 Tests relating to pavements. Tests on constituants of bituminous mixtures. Part 1 : determination of fines particules absorbing capacity.
NF P98-253-1:1991 Tests relating to pavements. Bituminous mixtures permanent deformation. Part 1 : wheel tracking test.
NF P98-150:1992 Bituminous asphalt. Laying of base, binder and surface courses. Components. Mix contents. Performance and checks.

The American Road & Transportation Builders Association, fracture toughness of asphalt mixture

AASHTO T 393-2021 Standard Method of Test for Determining the Fracture Potential of Asphalt Mixtures Using the Illinois Flexibility Index Test (I-FIT)
AASHTO TP 105-2013 Standard Method of Test for Determining the Fracture Energy of Asphalt Mixtures Using the Semicircular Bend Geometry (SCB)
AASHTO PP 61-2013 Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
AASHTO TP 79-2013 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
AASHTO TP 79-2015 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT)
AASHTO M 323-2007 Standard Specification for Superpave Volumetric Mix Design
AASHTO T 314-2012 Standard Method of Test for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
AASHTO TP 79-2009 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt (HMA) Using the Asphalt Mixture Performance Tester (AMPT)
AASHTO PP 61-2010 Standard Practice for Developing Dynamic Modulus Master Curves for Hot Mix Asphalt (HMA) Using the Asphalt Mixture Performance Tester (AMPT) Revision 1
AASHTO T 314-2007 Standard Method of Test for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
AASHTO TP 63-2007 Standard Method of Test for Determining Rutting Susceptibility of Hot-Mix Asphalt (HMA) Using the Asphalt Pavement Analyzer (APA)
AASHTO TP 79-2010 Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Hot Mix Asphalt: (HMA) Using the Asphalt Mixture Performance Tester (AMPT) Revision 1
AASHTO T 305-2014 Standard Method of Test for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
AASHTO PP 61-2009 Standard Practice for Developing Dynamic Modulus Master Curves for Hot Mix Asphalt (HMA) Using the Asphalt Mixture Performance Tester (AMPT)
AASHTO T 110-2003 Standard Method of Test for Moisture or Volatile Distillates in Hot-Mix Asphalt (HMA)

Lithuanian Standards Office , fracture toughness of asphalt mixture

LST EN 13075-1-2009 Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method
LST EN 13075-2-2009 Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions
LST EN 12697-46-2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 46: Low temperature cracking and properties by uniaxial tension tests
LST EN 12697-43-2005 Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel
LST EN 12697-10-2002 Bituminous mixtures - Test methods for hot mix asphalt - Part 10: Compactability
LST EN 12697-10-2002/AC-2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 10: Compactibility
LST EN 12697-44-2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 44: Crack propagation by semi-circular bending test
LST EN 12697-24-2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to fatigue
LST EN 12697-8-2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 8: Determination of void characteristics of bituminous specimens
LST EN 12697-12-2008 Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens
LST EN 12697-41-2005 Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids
LST EN 12697-40-2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 40: In situ drainability
LST EN 12697-19-2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 19: Permeability of specimen
LST EN 12697-1-2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 1: Soluble binder content
LST EN 12697-15-2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 15: Determination of the segregation sensitivity
LST 1419-1995/1K-1996 Asphalt concrete mixtures and asphalt concrete for road construction. Requirements for activated mineral filler
LST 1419-1995 Asphalt concrete mixtures and asphalt concrete for road construction. Requirements for activated mineral filler
LST 1419.1-1996 Asphalt concrete mixtures and asphalt concrete for road construction. Testing methods for activated mineral filler
LST EN 12697-37-2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA
LST EN 1744-4-2006 Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures

European Committee for Standardization (CEN), fracture toughness of asphalt mixture

PD CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
EN 13075-2:2016 Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions
EN 12697-43:2005 Bituminous mixtures Test methods for hot mix asphalt Part 43: Resistance to fuel
EN 12697-46:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 46: Low temperature cracking and properties by uniaxial tension tests
CEN/TS 16346:2012 Bituminous binders - Determination of breaking behaviour and immediate adhesivity of cationic bituminous emulsions with 2/4 mm aggregate
prEN 12697-43-2021 Bituminous mixtures - Test methods - Part 43: Resistance to fuel
EN 12697-37:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA
PD CEN/TS 12697-50:2016 Bituminous mixtures - Test methods - Part 50: Resistance to scuffing
FprEN 1744-4-2021 Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures
FprEN 12697-15-2021 Bituminous mixtures - Test methods - Part 15: Determination of the segregation sensitivity
EN 1744-4:2021 Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures
prEN 12697-37-2020 Bituminous mixtures - Test methods - Part 37: Hot sand test for the adhesivity of binder on pre-coated chippings for Hot-Rolled-Asphalt (HRA)

国家市场监督管理总局、中国国家标准化管理委员会, fracture toughness of asphalt mixture

GB/T 38948-2020 Evaluation method for the cracking resistance of asphalt mixture at low temperature
GB/T 38990-2020 Waterborne epoxylite emulsified binder mixture for road engineering
GB/T 39484-2020 Fibre-reinforced plastic composites—Determination of the mode Ⅱ fracture resistanc for unidirectionally reinforced materials using the calibrated end-loaded split(C-ELS) test and an effective crack length approach

RU-GOST R, fracture toughness of asphalt mixture

GOST EN 13075-1-2013 Bitumens and bituminous binders. Determination of breaking behaviour. Part 1. Determination of breaking value of cationic bituminous emulsions by mineral filler method
GOST EN 13075-2-2013 Bitumens and bituminous binders. Determination of breaking behaviour. Part 2. Determination of fines mixing time of cationic bitumen emulsions
GOST R 56808-2015 Polymer composites. Method for determination interlaminar fracture toughness of unidirectional-reinforced composites
PNST 128-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. The method of determining the dynamic modulus, the number of the flow of hot asphalt mixes using the setup for performance test (AMPT)
PNST 113-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt concrete. Method for determination of water resistance and adhesion properties
GOST R 57206-2016 Polymer composites. Test method of determination of the mode II fracture toughness for the calibrated end-loaded split (C-ELS)
GOST R 57994-2017 Polymer composites. Test methods for fracture toughness definition and energy release speeds
PNST 180-2016 Automobile roads of general use. Road hot asphalt mixtures and asphalt concrete. Method for determination of abrasion
PNST 115-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Design method of volumetric composition according to Superpave methodology
PNST 134-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. The method of determining the internal angle of rotation of the rotary seal to the Superpave (SGC)
PNST 114-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Technical requirements for volumetric design method according to Superpave methodology
GOST 33685-2015 Polymer composites. Test method for determination of the interlaminar fracture toughness under shear GIIC
GOST R 55419-2013 Composite material based on active rubber powder, modifying asphalt mixes. Technical requirements and test methods
GOST R 56740-2015 Polymer composites. Method for determination of translaminar fracture toughness characteristic of polymer composite laminates and pultruded polymer composites
PNST 109-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt concrete. Method for determination of resistance to plastic flow of cylindrical samples at Marshall installation

CEN - European Committee for Standardization, fracture toughness of asphalt mixture

PREN 13075-1-2015 Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions@ mineral filler method
PREN 12697-44-2017 Bituminous mixtures - Test methods for hot mix asphalt - Part 44: Crack propagation by semi-circular bending test
PD CEN/TS 16346:2012 Bituminous binders - Determination of breaking behaviour and immediate adhesivity of cationic bituminous emulsions with 2/4 mm aggregate
PREN 12697-46-2018 Bituminous mixtures - Test methods - Part 46: Low temperature cracking and properties by uniaxial tension tests
PREN 12697-55-2018 Bituminous mixtures - Test methods - Part 55: Organoleptic assessment of compatibility of constituent materials of a mixture with bitumen emulsion
PREN 12697-40-2018 Bituminous mixtures - Test methods - Part 40: In situ drainability
PREN 12697-1-2018 Bituminous mixtures - Test methods - Part 1: Soluble binder content
PREN 12697-19-2018 Bituminous mixtures - Test methods - Part 19: Permeability of specimen

KR-KS, fracture toughness of asphalt mixture

KS F 2385-2013(2023) Permeable asphalt mixtures

AENOR, fracture toughness of asphalt mixture

UNE-EN 12697-46:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 46: Low temperature cracking and properties by uniaxial tension tests
UNE-EN 12697-43:2014 Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel
UNE-EN 12697-44:2011 Bituminous mixtures - Test methods for hot mix asphalt - Part 44: Crack propagation by semi-circular bending test
UNE-EN 12697-24:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to fatigue
UNE-EN 12697-12:2009 Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens
UNE-EN 12697-8:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 8: Determination of void characteristics of bituminous specimens
UNE-EN 12697-40:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 40: In situ drainability
UNE-EN 12697-41:2014 Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids
UNE-EN 12697-19:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 19: Permeability of specimen
UNE-EN 12697-1:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 1: Soluble binder content
UNE-EN 12697-15:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 15: Determination of the segregation sensitivity
UNE-EN 12697-10:2003 BITUMINOUS MIXTURES. TEST METHODS FOR HOT MIX ASPHALT. PART 10: COMPACTABILITY.
UNE-EN 12697-37:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA
UNE-EN 1744-4:2007 Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures

Henan Provincial Standard of the People's Republic of China, fracture toughness of asphalt mixture

DB41/T 1466-2017 Construction technical specification for rock asphalt modified asphalt mixture

Anhui Provincial Standard of the People's Republic of China, fracture toughness of asphalt mixture

DB34/T 3092-2018 Technical specification for the application of drainage and anti-cracking asphalt mixture
DB34/T 2876-2017 Technical specification for design and construction of rubber powder modified asphalt mixture
DB34/T 3350-2019 Construction Technical Regulations for Activated Wet Buton Rock Modified Asphalt Mixture
DB34/T 3839-2021 Technical specification for design and construction of high fatigue performance and high modulus asphalt mixture

Guangdong Provincial Standard of the People's Republic of China, fracture toughness of asphalt mixture

DB44/T 1182-2013 Asphalt mixture polyolefin modifier

Group Standards of the People's Republic of China, fracture toughness of asphalt mixture

T/CHTS 20014-2021 Polyolefin Asphalt Mixture Modifier
T/CHTS 10093-2023 Technical Guide for Application of Polyphosphoric Acid Modified Asphalt Mixture
T/CECS G D54-05-2021 Technical Specifications for Application of High Modulus Asphalt Concrete Modified by Direct-adding Polymer Modifier

Professional Standard - Traffic, fracture toughness of asphalt mixture

JT/T 860.5-2014 Modifier for asphalt mixture.Part 5:Natural asphalt
JT/T 1169-2017 Vacuum sealing device for porous asphalt mixture
JT/T 860.3-2014 Modifier for asphalt mixture.Part 3: Flame retardant additive
JT/T 860.6-2016 Modifier for asphalt mixture.Part 6: Warm mixture additive
JT/T 860.4-2014 Modifier for asphalt mixture.Part 4:Anti-stripping agent
JT/T 860.1-2013 Modifier for asphalt mixture.Part 1:Anti-rutting additive
JT/T 860.2-2013 Modifier for asphalt mixture.Part 2:High viscosity additive

Professional Standard - Machinery, fracture toughness of asphalt mixture

JB/T 12616-2016 Inspection methods of fracture toughness for hardmetals tool base material

Professional Standard - Aviation, fracture toughness of asphalt mixture

HB 7718.1-2002 Test method of interlaminar fracture toughness of carbon fiber composite laminates in hot-wet environments Part 1:Test method of mode Ⅰ interlaminar fracture toughness
HB 7718.2-2002 Test method of interlaminar fracture toughness of carbon fiber composite laminates in hot-wet environments Part 2:Test method of mode Ⅱ interlaminar fracture toughness
HB 7402-1996 GIC test method for mode I interlaminar fracture toughness of carbon fiber composite laminates
HB 7403-1996 GⅡC test method for mode Ⅱ interlaminar fracture toughness of carbon fiber composite laminates

ES-AENOR, fracture toughness of asphalt mixture

UNE 104-281 Pt.6-6-1985

Inner Mongolia Provincial Standard of the People's Republic of China, fracture toughness of asphalt mixture

DB15/T 1637-2019 Specifications for Design and Construction of Normal Temperature Modified Asphalt and Asphalt Mixture
DB15/T 1417-2018 Code for design and construction of rubber powder modified asphalt and mixture

American Society for Testing and Materials (ASTM), fracture toughness of asphalt mixture

ASTM D7313-20 Standard Test Method for Determining Fracture Energy of Asphalt Mixtures Using the Disk-Shaped Compact Tension Geometry
ASTM D7313-07a Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry
ASTM D7313-07 Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry
ASTM D7313-13 Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry
ASTM E1922-97 Standard Test Method for Translaminar Fracture Toughness of Laminated Polymer Matrix Composite Materials
ASTM E1922-04 Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
ASTM E1922-04(2010)e1 Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
ASTM D6671/D6671M-19 Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
ASTM D8225-19 Standard Test Method for Determination of Cracking Tolerance Index of Asphalt Mixture Using the Indirect Tensile Cracking Test at Intermediate Temperature
ASTM D6671/D6671M-22 Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
ASTM D6671/D6671M-13e1 Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
ASTM E1922/E1922M-22 Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
ASTM E1922-04(2015) Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
ASTM D6723-01 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
ASTM D6723-02 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
ASTM D6723-12 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
ASTM D8303-20 Standard Test Method for Determining Thermal Cracking Properties of Asphalt Mixtures Through Measurement of Thermally Induced Stress and Strain
ASTM D5528-01 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D5528-94a Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D5528-01(2007) Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D5528-01(2007)e3 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D8044-23 Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance Using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures
ASTM D8044-16 Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures
ASTM D6627-01(2006) Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures
ASTM D6627-01 Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures
ASTM D6627/D6627M-11 Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures
ASTM D6927-22 Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures
ASTM D5528/D5528M-21 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D6704-22 Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material
ASTM D6927-06 Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures
ASTM D6927-04 Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures
ASTM D7460-10 Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending
ASTM D6671/D6671M-06 Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
ASTM D5528-01(2007)e1 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D5528-01(2007)e2 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D7905/D7905M-19 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D7905/D7905M-19e1 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D6704-08(2015) Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material
ASTM D1461-17 Standard Test Method for Moisture or Volatile Distillates in Asphalt Mixtures
ASTM D7905/D7905M-14 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D6704-01 Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material
ASTM D6704-08 Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material
ASTM D6927-05 Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures
ASTM D6927-05e1 Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures

Xinjiang Provincial Standard of the People's Republic of China, fracture toughness of asphalt mixture

DB65/T 3891-2016 Technical specifications for design and construction of SMC normal temperature modified asphalt pavement asphalt mixture

Yunnan Provincial Standard of the People's Republic of China, fracture toughness of asphalt mixture

DB53/T 977-2020 Construction technical specification for diatom modified asphalt mixture

AT-ON, fracture toughness of asphalt mixture

OENORM EN 12697-43-2021 Bituminous mixtures - Test methods - Part 43: Resistance to fuel
OENORM EN 12697-15-2021 Bituminous mixtures - Test methods - Part 15: Determination of the segregation sensitivity
OENORM EN 12697-37-2021 Bituminous mixtures - Test methods - Part 37: Hot sand test for the adhesivity of binder on pre-coated chippings for Hot-Rolled-Asphalt (HRA)

Standard Association of Australia （SAA）, fracture toughness of asphalt mixture

AS/NZS 2891.8:2014

Military Standard of the People's Republic of China-General Armament Department, fracture toughness of asphalt mixture

GJB 586A-2021 Test method for tensile interlaminar fracture toughness of fiber reinforced plastic laminates

Hebei Provincial Standard of the People's Republic of China, fracture toughness of asphalt mixture

DB13/T 2511-2017 Technical Guidelines for the Application of Buton Rock Modified Asphalt Mixture

Shandong Provincial Standard of the People's Republic of China, fracture toughness of asphalt mixture

DB37/T 2978-2017 Surfactant type warm mix asphalt mixture technical specification
DB37/T 1722-2010 Technical Specifications for High Performance Asphalt Mixtures for Highway Engineering in Shandong Province
DB37/T 4382-2021 Environmentally friendly and stable rubber powder modified asphalt and mixture construction technical regulations

Jiangsu Provincial Standard of the People's Republic of China, fracture toughness of asphalt mixture

DB32/T 2619-2014 Construction technical specification for diatomite modified asphalt mixture

Liaoning Provincial Standard of the People's Republic of China, fracture toughness of asphalt mixture

DB21/T 2538-2015 Technical specification for design and construction of SBR modified asphalt mixture
DB21/T 1402-2006 Technical Specifications for Design and Construction of SBS Modified Asphalt Mixtures

GOSTR, fracture toughness of asphalt mixture

GOST R 58401.18-2019 Automobile roads of general use. Asphalt mixtures and asphalt concrete for road pavement. Method for determination of water resistance and adhesion properties
GOST R 58406.8-2019 Automobile roads of general use. Asphalt mixtures and asphalt concrete for road pavement. Determination of the resistance to plastic flow by Marshall’s method
GOST R 58401.22-2019 Automobile roads of general use. Asphalt mixtures and asphalt concrete for road pavement. Determination of the density of the layer by a nondestructive methods

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, fracture toughness of asphalt mixture

GB/T 28891-2012 Fibre-reinforced plastic composites.Determination of mode I interlaminar fracture toughness G<下标IC> for unidirectionally reinforced materials

Society of Automotive Engineers (SAE), fracture toughness of asphalt mixture

SAE J2118-1994 Braking Performance - Rubber-Tired Asphalt Pavers R(1998)

Jilin Provincial Standard of the People's Republic of China, fracture toughness of asphalt mixture

DB22/T 2980-2019 Technical specifications for the application of rubber powder modified asphalt and its mixture
DB22/T 5051-2021 Technical standard for warm-mix rubber-modified asphalt mixture for urban roads

Sichuan Provincial Standard of the People's Republic of China, fracture toughness of asphalt mixture

DB51/T 2514-2018 Technical Guidelines for Application of Diatomite Modified Asphalt Mixture for Highway

交通运输部, fracture toughness of asphalt mixture

JT/T 860.8-2023 Asphalt mixture modification additives Part 8: High modulus agent
JT/T 860.7-2017 Asphalt mixture modification additives Part 7: Waste tire pyrolysis carbon black

Taiwan Provincial Standard of the People's Republic of China, fracture toughness of asphalt mixture

CNS 12395-1988 Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus

Heilongjiang Provincial Standard of the People's Republic of China, fracture toughness of asphalt mixture

DB23/T 3481-2023 Environmentally friendly and stable rubber powder modified asphalt and mixture construction technical regulations