ZH
RU
ES

Tensile Strength of Asphalt Mixture

Tensile Strength of Asphalt Mixture, Total:317 items.

In the international standard classification, Tensile Strength of Asphalt Mixture involves: Road engineering, Waxes, bituminous materials and other petroleum products, Construction materials, Thermodynamics and temperature measurements, Construction equipment, Structures of buildings, Road vehicle systems, Equipment for petroleum and natural gas industries, Reinforced plastics, Materials for aerospace construction, Chipless working equipment, Road vehicles in general, Plastics, Ceramics.

RU-GOST R, Tensile Strength of Asphalt Mixture

PNST 179-2016 Road hot asphalt mixtures and asphalt concrete. Method for determination of bending tensile strength and ulimate relative tensile strain
PNST 136-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. The method of determining the tensile strength and stiffness
PNST 135-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. The method of determining the fatigue strength under repeated bending
PNST 95-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determining the degree of coating grains of aggregate by asphalt binder
PNST 92-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determination of maximum density
PNST 106-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determination of bulk density
GOST R 57867-2017 Polymer composites. Test methods for determination of pull-through resistance
PNST 131-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determining the density of the place of application with a gamma densitometer
GOST 23409.7-1978 Moulding sands, moulding and core sand mixtures. Methods for determination of compressive, tensile, bending and shearing strength
GOST 23409.16-1978 Moulding sand mixtures. Method for determination of tensile strength limit in moisture condensation zone
PNST 181-2016 Automobile roads of general use. Road hot asphalt mixtures and asphalt concrete. Method for determining the resistance to rutting by rolling a loaded wheel
PNST 107-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determination of bulk density, using paraffined samples
GOST R 56763-2015 Polymer composites. Method for determination of tensile strength of sandwich core materials
PNST 109-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt concrete. Method for determination of resistance to plastic flow of cylindrical samples at Marshall installation
GOST R 57802-2017 Ceramic composites. Test method for determination of transthickness tensile strength at ambient temperature

European Committee for Standardization (CEN), Tensile Strength of Asphalt Mixture

EN 12697-23:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 23: Determination of the indirect tensile strength of bituminous specimens
EN 12697-23:2017 Bituminous mixtures - Test methods - Part 23: Determination of the indirect tensile strength of bituminous specimens
EN 12697-46:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 46: Low temperature cracking and properties by uniaxial tension tests
EN 12697-45:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test
EN 12697-10:2001 Bituminous mixtures - Test methods for hot mix asphalt - Part 10: Compactability
EN 12697-10:2017 Bituminous mixtures - Test methods - Part 10: Compactability
EN 12697-5:2009 Bituminous mixtures - Test methods for hot mix asphalt - Part 5: Determination of the maximum density
PD CEN/TS 12697-51:2017 Bituminous mixtures - Test methods - Part 51: Surface shear strength test
PD CEN/TS 12697-50:2016 Bituminous mixtures - Test methods - Part 50: Resistance to scuffing
prEN 12697-41-2020 Bituminous mixtures - Test methods - Part 41: Resistance to de-icing fluids
prEN 12697-36-2020 Bituminous mixtures - Test methods - Part 36: Determination of the thickness of bituminous pavement
EN 12697-15:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 15: Determination of the segregation sensitivity
EN 12697-7:2014 Bituminous mixtures - Test methods for hot mix asphalt - Part 7: Determination of bulk density of bituminous specimens by gamma rays
CEN/TS 12697-51:2017 Bituminous mixtures - Test methods - Part 51: Surface shear strength test
EN 1744-4:2005 Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures

Association Francaise de Normalisation, Tensile Strength of Asphalt Mixture

NF P98-818-23:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 23 : determination of the indirect tensile strength of bituminous specimens.
NF P98-818-46:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 46: low temperature cracking and properties by uniaxial tension tests
NF P98-818-23*NF EN 12697-23:2017 E: Bituminous mixtures -Test methods - Part 23 : Determination of the indirect tensile strength of bituminous specimens
NF EN 12697-23:2017 Mélanges bitumineux - Méthode d'essais - Partie 23 : Détermination de la résistance à la traction indirecte des éprouvettes bitumineuses
NF P98-818-45:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 45 : Saturation Ageing Tensile Stiffness (SATS) conditioning test.
NF P98-818-36:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 36 : determination of the thickness of a bituminous pavement.
NF P98-818-7:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 7 : determination of bulk density of bituminous specimens by gamma rays.
XP P98-818-50*XP CEN/TS 12697-50:2020 Bituminous mixtures - Test methods - Part 50 : resistance to scuffing
NF P98-818-24*NF EN 12697-24:2018 Bituminous mixtures - Test methods - Part 24 : resistance to fatigue
NF P98-818-36*NF EN 12697-36:2022 Bituminous mixtures - Test methods - Part 36 : determination of the thickness of bituminous pavement
NF EN 13179-2:2001 Essais sur les fillers utilisés dans les mélanges bitumineux - Partie 2 : viscosité apparente (Nombre-bitume)
NF P98-818-45*NF EN 12697-45:2020 Bituminous mixtures - Test methods - Part 45 : saturation Ageing Tensile Stiffness (SATS) conditioning test
NF P98-818-13*NF EN 12697-13:2017 Bituminous mixtures - Test methods - Part 13 : temperature measurement
NF P98-818-49:2014 Bituminous mixtures - Test methods for hot mix asphalt - Part 49 : determination of friction after polishing
NF P98-818-46*NF EN 12697-46:2020 Bituminous mixtures - Test methods - Part 46 : low temperature cracking and properties by uniaxial tension tests
NF P18-660-4:2006 Tests for chemical properties of agregates - Part 4 : determination of water susceptibility of fillers for bituminous mixtures.
NF P98-260-1:2011 Tests relating to pavements - Measurements of the rheological properties of bituminous mixtures - Part 1 : determination of the lost of linearity under direct traction (tensile test)

BR-ABNT, Tensile Strength of Asphalt Mixture

ABNT NBR 15087-2012 Asphalt mixtures - Determination of tensile strength by diametral compression
ABNT NBR 15573-2012 Asphaltic mixtures — Determination of bulk specific gravity and density of compacted specimens

Danish Standards Foundation, Tensile Strength of Asphalt Mixture

DS/EN 12697-23:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 23: Determination of the indirect tensile strength of bituminous specimens
DS/EN 12697-24:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to fatigue
DS/EN 12697-41:2005 Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids
DS/EN 12697-26:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 26: Stiffness
DS/EN 12697-45:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test
DS/EN 12697-36:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 36: Determination of the thickness of a bituminous pavement
DS/EN 12697-13:2000 Bituminous mixtures - Test methods for hot mix asphalt - Part 13: Temperature measurement
DS/EN 12697-13/AC:2001 Bituminous mixtures - Test methods for hot mix asphalt - Part 13: Temperature measurement
DS/EN 12697-6:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens
DS/EN 12697-2+A1:2007 Bituminous mixtures - Test method for hot mix asphalt - Part 2: Determination of particle size distribution
DS/EN 12697-5/AC:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 5: Determination of the maximum density
DS/EN 12697-5:2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 5: Determination of the maximum density
DS/EN 12697-7:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 7: Determination of bulk density of bituminous specimens by gamma rays
DS/EN 12697-46:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 46: Low temperature cracking and properties by uniaxial tension tests

Lithuanian Standards Office , Tensile Strength of Asphalt Mixture

LST EN 12697-23-2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 23: Determination of the indirect tensile strength of bituminous specimens
LST EN 12697-24-2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to fatigue
LST EN 12697-41-2005 Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids
LST EN 12697-26-2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 26: Stiffness
LST EN 12697-45-2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test
LST EN 12697-36-2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 36: Determination of the thickness of a bituminous pavement
LST EN 12697-13+AC-2002 Bituminous mixtures - Test methods for hot mix asphalt - Part 13: Temperature measurement
LST EN 12697-6-2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens
LST EN 12697-2+A1-2007 Bituminous mixtures - Test method for hot mix asphalt - Part 2: Determination of particle size distribution
LST EN 12697-5-2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 5: Determination of the maximum density
LST EN 12697-5-2010/AC-2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 5: Determination of the maximum density
LST EN 12697-7-2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 7: Determination of bulk density of bituminous specimens by gamma rays
LST EN 12697-46-2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 46: Low temperature cracking and properties by uniaxial tension tests

AENOR, Tensile Strength of Asphalt Mixture

UNE-EN 12697-23:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 23: Determination of the indirect tensile strength of bituminous specimens
UNE-EN 12697-24:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to fatigue
UNE-EN 12697-41:2014 Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids
UNE-EN 12697-26:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 26: Stiffness
UNE-EN 12697-45:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test
UNE-EN 12697-36:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 36: Determination of the thickness of a bituminous pavement
UNE-EN 12697-13:2001 Bituminous mixtures - Test methods for hot mix asphalt - Part 13: Temperature measurement.
UNE-EN 12697-6:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens
UNE-EN 12697-5:2010 Bituminous mixtures - Test methods for hot mix asphalt - Part 5: Determination of the maximum density
UNE-EN 12697-7:2014 Bituminous mixtures - Test methods for hot mix asphalt - Part 7: Determination of bulk density of bituminous specimens by gamma rays
UNE-EN 12697-46:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 46: Low temperature cracking and properties by uniaxial tension tests

American Society for Testing and Materials (ASTM), Tensile Strength of Asphalt Mixture

ASTM D1074-96 Standard Test Method for Compressive Strength of Bituminous Mixtures
ASTM D1074-17 Standard Test Method for Compressive Strength of Asphalt Mixtures
ASTM D1074-02 Standard Test Method for Compressive Strength of Bituminous Mixtures
ASTM D1074-09 Standard Test Method for Compressive Strength of Bituminous Mixtures
ASTM D6931-17 Standard Test Method for Indirect Tensile (IDT) Strength of Asphalt Mixtures
ASTM D6931-07 Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures
ASTM D6931-12 Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures
ASTM D1075-96(2000) Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
ASTM D1075-96(2005) Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
ASTM D1075-11 Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
ASTM D7313-07a Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry
ASTM D7313-07 Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry
ASTM D1075-07 Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
ASTM D7313-13 Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry
ASTM C1583/C1583M-04e1 Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
ASTM D8225-19 Standard Test Method for Determination of Cracking Tolerance Index of Asphalt Mixture Using the Indirect Tensile Cracking Test at Intermediate Temperature
ASTM D7379-08 Standard Test Methods for Strength of Modified Bitumen Sheet Material Laps Using Cold Process Adhesive
ASTM D3549-93a(2000) Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
ASTM D3549/D3549M-18(2023) Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens
ASTM D3549/D3549M-17 Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens
ASTM D3549/D3549M-18 Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens
ASTM D2489/D2489M-16 Standard Test Method for Estimating Degree of Particle Coating of Asphalt Mixtures
ASTM D2489-00 Standard Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures
ASTM D2489-02 Standard Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures
ASTM D2489/D2489M-08 Standard Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures
ASTM D3549/D3549M-11 Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
ASTM D7369-09 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test
ASTM D7369-20 Standard Test Method for Determining the Resilient Modulus of Asphalt Mixtures by Indirect Tension Test
ASTM D5581-06 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)
ASTM D3549-03 Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
ASTM C1583-04 Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
ASTM C1583/C1583M-13 Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
ASTM D2950/D2950M-22 Standard Test Method for Density of Asphalt Mixtures in Place by Nuclear Methods
ASTM D4887/D4887M-11(2021)e1 Standard Practice for Preparation of Viscosity Blends for Hot Recycled Asphalt Materials
ASTM D6927-15 Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures
ASTM D4887/D4887M-11(2016) Standard Practice for Preparation of Viscosity Blends for Hot Recycled Asphalt Materials
ASTM D7369-11 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test
ASTM D8044-23 Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance Using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures
ASTM D8044-16 Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures
ASTM D2041-00 Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
ASTM D2041-03a Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
ASTM D2726-11 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM D2726/D2726M-13 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM D1560-15 Standard Test Methods for Resistance to Deformation and Cohesion of Asphalt Mixtures by Means of Hveem Apparatus
ASTM D7313-20 Standard Test Method for Determining Fracture Energy of Asphalt Mixtures Using the Disk-Shaped Compact Tension Geometry
ASTM D2726-04 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM D2726-00 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM D5766/D5766M-23 Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
ASTM D6925-08 Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
ASTM D6925-15 Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor
ASTM D7332/D7332M-23 Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite

Korean Agency for Technology and Standards (KATS), Tensile Strength of Asphalt Mixture

KS F 2351-2020 Standard test method for the compressive strength of asphalt mixtures
KS F 2351-2005 Testing method for the compressive strength of asphalt mixtures
KS F 2382-2008 Testing method for indirect tension test of bituminous mixtures
KS F 2382-2013 Standard test method for indirect tension of asphalt mixtures
KS F 2398-2017 Testing method for resistance of compacted asphalt mixtures to moisture induced damage
KS F 2398-2017(2022) Testing method for resistance of compacted asphalt mixtures to moisture induced damage
KS F 2360-2016(2021) Testing method for degree of particle coating of asphalt-aggregate mixture
KS F 2360-2016 Testing method for degree of particle coating of asphalt-aggregate mixture
KS F 2360-1986 Testing method for degree of particle coating of asphalt-aggregate mixture
KS F 2397-2005 Standard test method for density of drained asphalt mixtures
KS F 2397-2013 Standard test method for density of drained asphalt mixtures
KS F 2360-2006 Testing method for degree of particle coating of asphalt-aggregate mixture
KS F 2367-2017 Testing method for thickness or height of compacted asphalt paving mixture specimens
KS F 2367-2017(2022) Testing method for thickness or height of compacted asphalt paving mixture specimens
KS F 2367-1986 Testing method for thickness or height of compacted asphalt paving mixture specimens
KS F 2335-1995 Testing methods for resistance to deformation and cohesion of bituminous mixtures by means of Hveem apparatus
KS F 2376-2014 Standard test method for determining the resilient modulus of asphalt mixtures using indirect tensile mode
KS F 2495-2017 Testing method for maximum specific gravity and density of asphalt mixtures using automatic vacuum sealing method
KS F 2496-2012 Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
KS F 2376-2014(2019) Standard test method for determining the resilient modulus of asphalt mixtures using indirect tensile mode
KS F 2495-2012 Testing method for maximum specific gravity and density of asphalt mixtures using automatic vacuum sealing method
KS F 2377-2016 Test method for preparing and determining density of hot?mix asphalt mixture by means of the gyratory compactor
KS F 2377-2016(2021) Test method for preparing and determining density of hot?mix asphalt mixture by means of the gyratory compactor

AASHTO - American Association of State Highway and Transportation Officials, Tensile Strength of Asphalt Mixture

T167-1994 Standard Method of Test for Compressive Strength of Bituminous Mixtures
T 167-2010 Standard Method of Test for Compressive Strength of Hot Mix Asphalt
T167-1995 Standard Specification for Compressive Strength of Bituminous Mixtures (Nineteenth Edition; ASTM D1074-93)
T 167-2005 Standard Method of Test for Compressive Strength of Hot-Mix Asphalt
T 167-2002 Standard Method of Test for Compressive Strength of Bituminous Mixtures (HM-22; Part IIA; ASTM Designation: D 1074-96)
T 283-2014 Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage
T 283-2003 Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage
T 322-2003 Standard Method of Test for Determining the Creep Compliance and Strength of Hot-Mix Asphalt (MHA) Using the Indirect Tensile Test Device
TP9-1994 Standard Test Method for Determining the Creep Compliance and Strength of Hot Mix Asphalt (HMA) Using the Indirect Tensile Test Device (Edition 1C)
TP9-1996 Standard Test Method for Determining the Creep Compliance and Strength of Hot Mix Asphalt (HMA) Using the Indirect Tensile Test Device (2000 Edition)
T283-1989 Standard Method of Test for Resistance of Compacted Bituminous Mixture to Moisture Induced Damage (Eighteenth Edition)
T 246-2007 Standard Method of Test for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus
T 355-2018 Standard Method of Test for In-Place Density of Asphalt Mixtures by Nuclear Methods
T 355-2015 Standard Method of Test for In-Place Density of Asphalt Mixtures by Nuclear Methods
T 355-2016 Standard Method of Test for In-Place Density of Asphalt Mixtures by Nuclear Methods
T 195-2018 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
T 195-2011 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
T230-1968 Standard Specification for Determining Degree of Pavement Compaction of Bituminous Aggregate Mixtures (Eighteenth Edition)
TP31-1996 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension
T 246-2010 Standard Method of Test for Resistance to Deformation and Cohesion of Hot Mix Asphalt (HMA) by Means of Hveem Apparatus
T 322-2007 Standard Method of Test for Determining the Creep Compliance and Strength of Hot-Mix Asphalt (HMA) Using the Indirect Tensile Test Device
TP31-1994 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension (Edition 1B)
T 209-2012 Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Hot Mix Asphalt (HMA)
T 209-1994 Standard Specification for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures (Eighteenth Edition)
T 246-1993 Standard Method of Test for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus (ASTM Designation D1560-81)

German Institute for Standardization, Tensile Strength of Asphalt Mixture

DIN EN 12697-23:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 23: Determination of the indirect tensile strength of bituminous specimens; German version EN 12697-23:2003
DIN EN 12697-23:2018 Bituminous mixtures - Test methods - Part 23: Determination of the indirect tensile strength of bituminous specimens
DIN EN 12697-46:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 46: Low temperature cracking and properties by uniaxial tension tests; German version EN 12697-46:2012
DIN EN 12697-23:2018-02 Bituminous mixtures - Test methods - Part 23: Determination of the indirect tensile strength of bituminous specimens; German version EN 12697-23:2017
DIN EN 12697-36:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 36: Method for the determination of the thickness of a bituminous pavement; German version EN 12697-36:2003
DIN EN 12697-45:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test; German version EN 12697-45:2012
DIN CEN/TS 12697-51:2017-10*DIN SPEC 18099:2017-10 Bituminous mixtures - Test methods - Part 51: Surface shear strength test; German version CEN/TS 12697-51:2017
DIN EN 12697-2:2007 Bituminous mixtures - Test method for hot mix asphalt - Part 2: Determination of particle size distribution (includes Amendment A1:2007); English version of DIN EN 12697-2:2007-11
DIN EN 12697-41:2023 Bituminous mixtures - Test methods - Part 41: Resistance to de-icing fluids
DIN EN 12697-24:2018 Bituminous mixtures - Test methods - Part 24: Resistance to fatigue
DIN EN 12697-36:2022 Bituminous mixtures - Test methods - Part 36: Determination of the thickness of bituminous pavement
DIN EN 12697-36:2020 Bituminous mixtures - Test methods - Part 36: Determination of the thickness of bituminous pavement; German and English version prEN 12697-36:2020
DIN EN 12697-36:2022-06 Bituminous mixtures - Test methods - Part 36: Determination of the thickness of bituminous pavement; German version EN 12697-36:2022
DIN EN 12697-26/A1:2022 Bituminous mixtures - Test methods - Part 26: Stiffness; German and English version EN 12697-26:2018/prA1:2022
DIN EN 12697-26:2020 Bituminous mixtures - Test methods - Part 26: Stiffness
DIN EN 12697-45:2020 Bituminous mixtures - Test methods - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test
DIN EN 12697-13:2018 Bituminous mixtures - Test methods - Part 13: Temperature measurement
DIN EN 12697-5:2019 Bituminous mixtures - Test methods - Part 5: Determination of the maximum density
DIN EN 12697-45:2020-05 Bituminous mixtures - Test methods - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test; German version EN 12697-45:2020
DIN EN 12697-46:2020 Bituminous mixtures - Test methods - Part 46: Low temperature cracking and properties by uniaxial tension tests
DIN EN 1744-4:2005 Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures; English version of DIN EN 1744-4

British Standards Institution (BSI), Tensile Strength of Asphalt Mixture

BS EN 12697-45:2012 Bituminous mixtures. Test methods for hot mix asphalt. Saturation Ageing Tensile Stiffness (SATS) conditioning test
BS EN 12697-23:2003 Bituminous mixtures - Test methods for hot mix asphalt - Determination of the indirect tensile strength of bituminous specimens
BS EN 13587:2010 Bitumen and bituminous binders. Determination of the tensile properties of bituminous binders by the tensile test method
BS EN 12697-43:2014 Bituminous mixtures. Test methods for hot mix asphalt. Resistance to fuel
BS EN 12697-43:2005 Bituminous mixtures - Test methods for hot mix asphalt - Resistance to fuel
BS EN 12697-24:2012 Bituminous mixtures. Test methods for hot mix asphalt. Resistance to fatigue
BS EN 12697-24:2004 Bituminous mixtures - Test methods for hot mix asphalt - Resistance to fatigue
BS EN 12697-26:2012 Bituminous mixtures. Test methods for hot mix asphalt. Stiffness
BS EN 12697-26:2004 Bituminous mixtures - Test methods for hot mix asphalt - Stiffness
BS EN 12697-36:2003 Bituminous mixtures - Test methods for hot mix asphalt - Determination of the thickness of a bituminous pavement
BS EN 12697-36:2022 Bituminous mixtures - Test methods for hot mix asphalt - Determination of the thickness of a bituminous pavement
BS EN 12697-13:2000 Bituminous mixtures - Test methods for hot mix asphalt - Temperature measurement
BS EN 12697-6:2012 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens
BS EN 12697-6:2003 Bituminous mixtures — Test methods for hot mix asphalt — Part 6: Determination of bulk density of bituminous specimens
BS EN 12697-23:2017 Tracked Changes. Bituminous mixtures. Test methods. Determination of the indirect tensile strength of bituminous specimens
DD 213-1993 Method for determination of the indirect tensile stiffness modulus of bituminous mixtures
BS PD CEN/TS 12697-50:2016 Bituminous mixtures. Test methods. Resistance to scuffing
BS PD CEN/TS 12697-50:2018 Bituminous mixtures. Test methods. Resistance to scuffing
BS EN 12697-5:2002 Bituminous mixtures - Test methods for hot mix asphalt - Determination of the maximum density
BS EN 12697-5:2009 Bituminous mixtures - Test methods for hot mix asphalt - Determination of the maximum density
BS EN 12697-5:2010 Bituminous mixtures. Test methods for hot mix asphalt. Determination of the maximum density
BS EN 12697-12:2008 Bituminous mixtures — Test methods for hot mix asphalt Part 12: Determination of the water sensitivity of bituminous specimens
BS EN 12697-7:2014 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens by gamma rays
BS EN 12697-56:2019 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens by gamma rays
BS EN 12697-7:2002 Bituminous mixtures - Test methods for hot mix asphalt - Determination of the bulk density of bituminous specimens by gamma rays
BS EN 12697-48:2021 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens by gamma rays
BS EN 12697-55:2019 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens by gamma rays
BS EN 12697-53:2019 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens by gamma rays
BS EN 12697-54:2019 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens by gamma rays
BS EN 12697-9:2002 Bituminous mixtures - Test methods for hot mix asphalt - Determination of the reference density
BS EN 12697-13:2017 Bituminous mixtures. Test methods. Temperature measurement
BS EN 12697-46:2012 Bituminous mixtures. Test methods for hot mix asphalt. Low temperature cracking and properties by uniaxial tension tests
BS EN 13286-40:2003 Unbound and hydraulically bound mixtures - Test method for determination of the direct tensile strength of hydraulically bound mixtures
BS PD CEN/TS 15963:2014 Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS DD CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS EN 12697-45:2020 Tracked Changes. Bituminous mixtures. Test methods. Saturation Ageing Tensile Stiffness (SATS) conditioning test
BS EN 1744-4:2005 Tests for chemical properties of aggregates - Determination of water susceptibility of fillers for bituminous mixtures
BS EN 1744-4:2021 Tests for chemical properties of aggregates - Determination of water susceptibility of fillers for bituminous mixtures
BS EN 13286-41:2003 Unbound and hydraulically bound mixtures - Test method for determination of the compressive strength of hydraulically bound mixtures
BS 598-107:2004 Sampling and examination of bituminous mixtures for roads and other paved areas - Method of test for the determination of the composition of design surface course rolled asphalt
BS EN 13286-42:2003 Unbound and hydraulically bound mixtures - Test method for the determination of the indirect tensile strength of hydraulically bound mixtures
18/30382731 DC BS EN 12697-45. Bituminous mixtures. Test methods. Part 45. Saturation Ageing Tensile Stiffness (SATS) conditioning test

The American Road & Transportation Builders Association, Tensile Strength of Asphalt Mixture

AASHTO T 167-2010 Standard Method of Test for Compressive Strength of Hot Mix Asphalt
AASHTO T 167-2002 Standard Method of Test for Compressive Strength of Bituminous Mixtures HM-22; Part IIA; ASTM Designation: D 1074-96
AASHTO T 195-1967 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
AASHTO T 283-2014 Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage
AASHTO T 283-2021 Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage
AASHTO T 283-2002 Standard Method of Test for Resistance of Compacted Mixtures to Moisture-Induced Damage HM-22; Part IIA
AASHTO T 355-2015 Standard Method of Test for In-Place Density of Asphalt Mixtures by Nuclear Methods
AASHTO T 195-1967(R2007) Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
AASHTO T 195-2011 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
AASHTO T 322-2007 Standard Method of Test for Determining the Creep Compliance and Strength of Hot-Mix Asphalt (HMA) Using the Indirect Tensile Test Device
AASHTO T 245-1997 Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
AASHTO T 246-2010 Standard Method of Test for Resistance to Deformation and Cohesion of Hot Mix Asphalt (HMA) by Means of Hveem Apparatus
AASHTO TP 116-2015 Standard Method of Test for Rutting Resistance of Asphalt Mixtures Using Incremental Repeated Load Permanent Deformation (iRLPD)
AASHTO T 209-2012 Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Hot Mix Asphalt (HMA)

ES-UNE, Tensile Strength of Asphalt Mixture

UNE-EN 12697-23:2018 Bituminous mixtures - Test methods - Part 23: Determination of the indirect tensile strength of bituminous specimens
UNE-EN 12697-36:2023 Bituminous mixtures - Test methods - Part 36: Determination of the thickness of bituminous pavement
UNE-EN 12697-45:2022 Bituminous mixtures - Test methods - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test

Group Standards of the People's Republic of China, Tensile Strength of Asphalt Mixture

T/CI 085-2023 Deicing Material for Asphalt Mixture in Highway
T/CSRA 4-2020 Anti-rutting Agent for Highway Asphalt Mixture

Indonesia Standards, Tensile Strength of Asphalt Mixture

SNI 8139-2015 Spesifikasi bahan anti pengelupasan (anti stripping) pada campuran beraspal panas
SNI 03-6758-2002 Test method for compressive strength of asphalt mixture

GOSTR, Tensile Strength of Asphalt Mixture

GOST R 58406.6-2020 Automobile roads of general use. Asphalt mixtures and asphalt concrete for road pavement. Method for determination of tensile strength and limit of relative tensile strain
GOST R 59280-2020 Automobile roads of general use. Hot asphalt mixtures and asphalt. The method of determining the fatigue endurance by indirect tensile test
GOST R 58401.7-2019 Automobile roads of general use. Asphalt mixtures and asphalt concrete for road pavement. Method for determination of creep compliance and strength with indirect tensile test (IDT)
GOST R 58401.6-2019 Automobile roads of general use. Asphalt mixtures and asphalt concrete for road pavement. Method for determining the degree of coating grains of aggregate by asphalt binder
GOST R 58401.11-2019 Automobile roads of general use. Asphalt mixtures and asphalt concrete for road pavement. Method for determining the fatigue strength under repeated bending
GOST R 58401.10-2019 Automobile roads of general use. Asphalt mixtures and asphalt concrete for road pavement. Methods for determining of bulk density
GOST R 58401.16-2019 Automobile roads of general use. Asphalt mixtures and asphalt concrete for road pavement. Methods for determination of maximum density
GOST R 58401.22-2019 Automobile roads of general use. Asphalt mixtures and asphalt concrete for road pavement. Determination of the density of the layer by a nondestructive methods
GOST R 58401.20-2019 Automobile roads of general use. Asphalt mixtures and asphalt concrete for road pavement. Methods for determination of bulk density, using paraffined samples

Professional Standard - Urban Construction, Tensile Strength of Asphalt Mixture

CJJ/T 238-2016 Technical specification for application of anti-rutting asphalt mixture

国家市场监督管理总局、中国国家标准化管理委员会, Tensile Strength of Asphalt Mixture

GB/T 36143-2018 Durable high modulus asphalt mixture for road engineering
GB/T 38948-2020 Evaluation method for the cracking resistance of asphalt mixture at low temperature

Professional Standard - Traffic, Tensile Strength of Asphalt Mixture

JT/T 270-2002 Batch type asphalt mixing plant
JT/T 922-2014 Consistency tester for asphalt emulsion slurry mixture
JT/T 834-2012 Test apparatus for theoretical maximum specific gravity of asphalt mixtures
JT/T 860.4-2014 Modifier for asphalt mixture.Part 4:Anti-stripping agent
JT/T 860.1-2013 Modifier for asphalt mixture.Part 1:Anti-rutting additive
JT/T 860.2-2013 Modifier for asphalt mixture.Part 2:High viscosity additive

交通运输部, Tensile Strength of Asphalt Mixture

JT/T 270-2019 Forced intermittent asphalt mixture mixing equipment

Anhui Provincial Standard of the People's Republic of China, Tensile Strength of Asphalt Mixture

DB34/T 3092-2018 Technical specification for the application of drainage and anti-cracking asphalt mixture

National Metrological Verification Regulations of the People's Republic of China, Tensile Strength of Asphalt Mixture

JJG(交通) 114-2014 Consistency Tester for Asphalt Emulsion Slurry Mixture

AT-ON, Tensile Strength of Asphalt Mixture

OENORM EN 12697-36-2021 Bituminous mixtures - Test methods - Part 36: Determination of the thickness of bituminous pavement

ES-AENOR, Tensile Strength of Asphalt Mixture

UNE 104-281 Pt.6-6-1985

Shanxi Provincial Standard of the People's Republic of China, Tensile Strength of Asphalt Mixture

DB14/T 677-2012 Technical specification for design and construction of road rutting-resistant asphalt mixture
DB14/T 2282-2021 Technical specification for design and construction of high modulus anti-fatigue asphalt mixture
DB14/T 1322-2016 Rutting test method for large thickness asphalt mixture structural layer
DB14/T 1715-2018 Technical requirements and testing methods of anti-rutting agent for highway asphalt mixture

Inner Mongolia Provincial Standard of the People's Republic of China, Tensile Strength of Asphalt Mixture

DB15/T 1932-2020 Technical specifications for design and construction of anti-icing asphalt mixture for highways

Shandong Provincial Standard of the People's Republic of China, Tensile Strength of Asphalt Mixture

DB37/T 3564-2019 Technical specification for design and construction of anti-rutting and anti-fatigue high modulus asphalt mixture

CEN - European Committee for Standardization, Tensile Strength of Asphalt Mixture

PREN 12697-45-2018 Bituminous mixtures - Test methods - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test
PREN 12697-46-2018 Bituminous mixtures - Test methods - Part 46: Low temperature cracking and properties by uniaxial tension tests

Standard Association of Australia （SAA）, Tensile Strength of Asphalt Mixture

AS 2891.8:2005 Methods of sampling and testing asphalt - Voids and density relationships for compacted asphalt mixes

Taiwan Provincial Standard of the People's Republic of China, Tensile Strength of Asphalt Mixture

CNS 8755-1987 Method of Test for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
CNS 8757-1987 Method of Test for Bulk Specific Gravity and Density of Compacted Bituminous Mixtyres Using Paraffin- Coated Specimens

Society of Automotive Engineers (SAE), Tensile Strength of Asphalt Mixture

SAE AMS3892/12-1992 Tow, Carbon Fiber for Structural Composites 730 (5033) Tensile Strength, 41 (283) Tensile Modulus
SAE AMS3892/11A-1992 Tow, Carbon Fiber for Structural Composites 450 (3103) Tensile Strength, 32 (221) Tensile Modulus
SAE AMS3892/10A-1992 Tow, Carbon Fiber for Structural Composites 550 (3792) Tensile Strength, 38 (262) Tensile Modulus
SAE AMS3892/9B-1992 Tow, Carbon Fiber for Structural Composites 500 (3447) Tensile Strength, 32 (221) Tensile Modulus
SAE AMS3892/6A-1992 Tow or Yarn, Carbon Fibers For Structural Composites GF 325 (2241) Tensile Strength, 57 (393) Tensile Modulus
SAE AMS3892/5B-1992 Tow or Yarn, Carbon Fibers For Structural Composites GF 220 (1517) Tensile Strength, 75 (517) Tensile Modulus
SAE AMS3892/4B-1992 Tow or Yarn, Carbon Fibers For Structural Composites GF 300 (2068) Tensile Strength, 75 (517) Tensile ModuluS
SAE AMS3892/2B-1992 Tow or Yarn, Carbon Fibers For Structural Composites GF 300 (2068) Tensile Strength, 50 (345) Tensile Modulus
SAE AMS3892/1B-1992 Tow or Yarn, Carbon Fibers For Structural Composites GF 400 (2758) Tensile Strength, 33 (228) Tensile Modulus
SAE AMS3892/8A-1992 Tow or Yarn, Carbon Fibers For Structural Composites GF (0X) 400 (2758) Tensile Strength, 40 (276) Tensile Modulus
SAE AMS3892/7A-1992 Tow or Yarn, Carbon Fibers For Structural Composites GF (0X) 400 (2758) Tensile Strength, 33 (228) Tensile Modulus
SAE AMS3892/3B-1992 Tow or Yarn, Carbon Fibers for Structural Composites GF 400 (2758) Tensile Strength, 40 (276) Tensile Modulus

未注明发布机构, Tensile Strength of Asphalt Mixture

BS 598-111:1995(1999) Sampling and examination of bituminous mixtures for roads and other paved areas — Part 111 : Method for determination of resistance to permanent deformation of bituminous mixtures subject to unconfined uniaxial loading