ZH
RU
ES

Fitting error calculation

Fitting error calculation, Total:80 items.

In the international standard classification, Fitting error calculation involves: Electricity. Magnetism. Electrical and magnetic measurements, Electromagnetic compatibility (EMC), Linear and angular measurements, Products of the textile industry, Solar energy engineering, Shipbuilding and marine structures in general, Quality, Electrical engineering in general, Insulation, Equipment for the chemical industry, Petroleum, petroleum products and natural gas handling equipment, Natural gas, Metrology and measurement in general, Domestic, commercial and industrial heating appliances, Fasteners, Galvanic cells and batteries, Construction industry, Structures of buildings.

Professional Standard - Electricity, Fitting error calculation

DL/T 731-2000 Error calculator used in electrical energy meter calibrating

Institute of Electrical and Electronics Engineers (IEEE), Fitting error calculation

IEEE Std C63.6-1996 American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements
IEEE Std C63.6-1988 Guide for the computation of errors in open-area test site measurements
ANSI Std C63.6-1996 American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements
IEEE/ANSI C63.6-1996 American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements
ANSI Std C63.6-1988 American National Standard Guide for electromagnetic compatibility--open-area test site measurements--guide for the computation of errors
IEEE/ANSI C63.6-1988 American National Standard Guide for electromagnetic compatibility--open-area test site measurements--guide for the computation of errors

American National Standards Institute （ANSI), Fitting error calculation

ANSI C63.6-1996 Guide for the Computation of Errors in Open-Area Test Site Measurements
ASNI C63.6-1996 Guide for the Computation of Errors in Open-Area Test Site Measurements

CZ-CSN, Fitting error calculation

CSN 36 9031-1975 Symbols for analog and hybrid computation

Association Francaise de Normalisation, Fitting error calculation

NF X10-106:1983 Mesure de débit des fluides - Calcul de l'erreur limite sur une mesure de débit
NF X06-047:1986 Application of statistical. Treatment of measured results. Errors estimation from interlaboratory comparaisons.
NF EN ISO 10360-6:2002 Spécification géométrique des produits (GPS) - Essai de réception et de vérification périodique des machines à mesurer tridimensionnelles (MMT) - Partie 6 : estimation des erreurs dans le calcul des éléments associés Gaussiens

GOSTR, Fitting error calculation

GOST 18421-1993 Analog and hybrid computing technique. Terms and definitions

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Fitting error calculation

GB/T 5371-1985 Tolerances and fits--The calculation and selection of interference fits
GB/T 16857.6-2006 Geometrical Product Specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Part 6: Estimation of errors in computing Gaussian associated features
GB/T 311.4-2010 Insulation co-ordination.Part 4:Computational guide to insulation co-ordination and modeling of electrical networks
GB/T 6495.7-2006 Photovoltaic devices. Part 7: Computation of spectral mismatch error introduced in the testing of a photovoltaic device

AGMA - American Gear Manufacturers Association, Fitting error calculation

90FTM3-1990 Simulation of Meshing@ Transmission Errors and Bearing Contact for Single-Enveloping Worm-Gear Drives
10FTM10-2010 Evaluation of Methods for Calculating Effects of Tip Relief on Transmission Error@ Noise and Stress in Loaded Spur Gears
09FTM07-2009 Optimizing Gear Geometry for Minimum Transmission Error@ Mesh Friction Losses and Scuffing Risk Through Computer Aided Engineering

International Organization for Standardization (ISO), Fitting error calculation

ISO 105-J03:1995/Cor 2:2006 Textiles - Tests for colour fastness - Part J03: Calculation of colour differences; Technical Corrigendum 2
ISO 105-J03:1995/Cor 1:1996 Textiles - Tests for colour fastness - Part J03: Calculation of colour differences; Technical Corrigendum 1
ISO 10360-6:2001/cor 1:2007 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features; Technical Corrigendum 1
ISO 10360-6:2001 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features
ISO 6976:1995/Cor 1:1997 Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition; Technical Corrigendum 1
ISO 6976:1995/Cor 3:1999 Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition; Technical Corrigendum 3
ISO 8423:1991/Cor 1:1993 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation); technical corrigendum 1

International Electrotechnical Commission (IEC), Fitting error calculation

IEC 60904-7:1995 Photovoltaic devices - Part 7: Computation of spectral mismatch error introduced in the testing of a photovoltaic device
IEC 60904-7:1998 Photovoltaic devices - Part 7: Computation of spectral mismatch error introduced in the testing of a photovoltaic device
IEC TR 60071-4:2004 Insulation co-ordination - Part 4: Computational guide to insulation co-ordination and modelling of electrical networks

American Gear Manufacturers Association, Fitting error calculation

AGMA 10FTM10-2010 Evaluation of Methods for Calculating Effects of Tip Relief on Transmission Error, Noise and Stress in Loaded Spur Gears
AGMA 09FTM07-2009 Optimizing Gear Geometry for Minimum Transmission Error, Mesh Friction Losses and Scuffing Risk Through Computer Aided Engineering

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Fitting error calculation

IEEE C63.6-1988 Standard for Electromagnetic Compatibility - Open - Area Test Site Measurements - Guide for the Computation of Errors
IEEE C63.6-1996 American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements
IEEE 1076.1-1999 VHDL Analog and Mixed-Signal Extensions (IEEE Computer Society Document)
IEEE P1076/D6-2018 Draft standard VHDL Analog and Mixed-Signal Extensions (IEEE Computer Society)
IEEE 1666.1-2016 Standard SystemC Analog/Mixed-Signal Extensions Language Reference Manual (IEEE Computer Society)
IEEE 1076.1.1-2011 VHDL Analog and Mixed-Signal Extensions—Packages for Multiple Energy Domain Support (IEEE Computer Society)
IEEE 802.1Q CORR 1-2008 Local and metropolitan area networks Virtual Bridged Local Area Networks Corrigendum 1: Corrections to the Multiple Register Protocol (IEEE Computer Society)
IEEE 1735-2014 Recommended Practice for Encryption and Management of Electronic Design Intellectual Property (IP) (IEEE Computer Society; Incorporating Corrigendum 1: 2015)
IEEE 802.1AX COR 1-2017 Local and metropolitan area networks-Link Aggregation-Corrigendum 1: Technical and editorial corrections (IEEE Computer Society)
IEEE 802.1Q CORR 2-2012 Local and metropolitan area networks-Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks-Corrigendum 2: Technical and editorial corrections (IEEE Computer Society)

Professional Standard-Ships, Fitting error calculation

CB*/Z 178-1980 Calculation and Inspection Method of Torque, Backlash and Transmission Error of Precision Gear Transmission Chain

Indonesia Standards, Fitting error calculation

SNI IEC 60904-7:2011

RU-GOST R, Fitting error calculation

GOST R 50779.28-2007 Statistical methods. Power law model. Goodness of-fit tests and estimation methods
GOST R 52857.11-2007 Vessels and apparatus. Norms and methods of strength calculation. Method of strength calculation of shells and heads according to weld misalignment, angular misalignment and shell nonroundness
GOST R 8.882-2015 State system for ensuring the uniformity of measurements. The volume of natural gas. Method of error calculations in measurements of natural gas volume at reference conditions. Basic principles

CENELEC - European Committee for Electrotechnical Standardization, Fitting error calculation

EN 60904-7:1998 Photovoltaic Devices Part 7: Computation of Spectral Mismatch Error Introduced in the Testing of a Photovoltaic Device

Japanese Industrial Standards Committee (JISC), Fitting error calculation

JIS Z 9041-2 ERRATUM 1:2000 Statistical Interpretation of Data Part 2: Techniques of estimation and test relating to means and variancesStatistical Interpretation of Data Part 2: Techniques of estimation and test relating to means and variances (Erratum 1)
JIS K 5600-4-6 ERRATUM 1:2002 Testing methods for paints -- Part 4: Visual characteristics of film -- Section 6: Colorimetry (Calculation of colour differences) (Erratum 1)

European Committee for Standardization (CEN), Fitting error calculation

EN ISO 105-J03:1997 Textiles - Tests for Colour Fastness - Part J03: Calculation of Colour Differences ISO 105-J03: 1995, Including Technical Corrigendum 1: 1996
EN 1996-3:2006 Eurocode 6 - Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures

IN-BIS, Fitting error calculation

IS 1885 Pt.52/Sec.13-1980

Taiwan Provincial Standard of the People's Republic of China, Fitting error calculation

CNS 13059.7-2002 Photovoltaic devices Part 7:Computation of spectral mismatch error introduced in the testing of a photovoltaic device
CNS 13059-7-2002 Photovoltaic devices Part 7:Computation of spectral mismatch error introduced in the testing of a photovoltaic device

Standard Association of Australia （SAA）, Fitting error calculation

AS/NZS CISPR 16.4.4:2004 Specification for radio disturbance and immunity measuring apparatus and methods - Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits

British Standards Institution (BSI), Fitting error calculation

BS EN ISO 10360-6:2001 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Estimation of errors in computing Gaussian associated features
BS EN ISO 10360-6:2002 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Estimation of errors in computing Gaussian associated features
BS ISO 9459-4:2013 Solar heating. Domestic water heating systems. System performance characterization by means of component tests and computer simulation

European Committee for Electrotechnical Standardization（CENELEC）, Fitting error calculation

EN 60970:2007 Insulating liquids - Methods for counting and sizing particles (Incorporating corrigendum January 2008)

Natural Gas Processor's Association (NGPA), Fitting error calculation

GPA RR-35-1979 Computer Simulations of Vapor-Liquid Compositions of Propane-Butane Mixtures in Cold Weather Field Tests

Korean Agency for Technology and Standards (KATS), Fitting error calculation

KS B ISO 10360-6:2014 Geometrical Product Specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 6: Estimation of errors in computing Gaussian associated features
KS B ISO 10360-6:2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring achines(CMM)-Part 6:Estimation of errors in computing Gsussian associated features
KS B ISO 10360-6:2019 Geometrical Product Specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 6: Estimation of errors in computing Gaussian associated features

Danish Standards Foundation, Fitting error calculation

DS/EN ISO 10360-6/Corr. 1:2007 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features
DS/EN ISO 10360-6:2002 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features

KR-KS, Fitting error calculation

KS B ISO 10360-6-2019 Geometrical Product Specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 6: Estimation of errors in computing Gaussian associated features

未注明发布机构, Fitting error calculation

BS EN ISO 10360-6:2001(2008) Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 6 : Estimation of errors in computing Gaussian associated features

ES-UNE, Fitting error calculation

UNE-EN ISO 10360-6:2002/AC:2009 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001/Cor 1:2007)

Lithuanian Standards Office , Fitting error calculation

LST EN ISO 10360-6:2002 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001)
LST EN ISO 10360-6:2002/AC:2008 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001/Cor 1:2007)

AENOR, Fitting error calculation

UNE-EN ISO 10360-6:2002 Geometrical Product Specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Part 6: Estimation of errors in computing Gaussian associated features. (ISO 10360-6:2001)

German Institute for Standardization, Fitting error calculation

DIN 29733-3:1984 Aerospace; rivet calculation values, static load, for close tolerance bolts of titanium alloy, with countersunk head, single shear
DIN 29732-3:1984 Aerospace; rivet calculation-values, static load, for close tolerance bolts of titanium alloy, with protruding head, single shear
DIN EN ISO 10360-6:2009 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001+Cor. 1:2007); English version of DIN EN ISO 1

Group Standards of the People's Republic of China, Fitting error calculation

T/CSAE 220-2021 Joint test methods for estimation error of states of charge and health of lithium-ion traction batteries for electric vehicles

ZA-SANS, Fitting error calculation

SANS 216-4-4:2008 Specification for radio disturbance and immunity measuring apparatus and methods Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits for the protection of radio services

ECMA - European Association for Standardizing Information and Communication Systems, Fitting error calculation

323-2002 XML Protocol for Computer Supported Telecommunications Applications (CSTA) Phase III (Incorporated errata: September 18@ 2003)

Canadian Standards Association (CSA), Fitting error calculation

CAN/CSA-ISO/IEC 14776-326:2004 Information technology – Small computer system interface (SCSI) – Part 326: Reduced block commands (RBC) (Incorporates Corrigendum 1: December 2010)