ZH
RU
ES
Die casting
Die casting, Total:328 items.
In the international standard classification, Die casting involves: Non-ferrous metals, Products of non-ferrous metals, Iron and steel products, Materials for aerospace construction, Quality, Manufacturing forming processes, Analytical chemistry, Chipless working equipment, Ferroalloys, Testing of metals, Technical drawings, Structure and structure elements, Mining equipment.
Association Francaise de Normalisation, Die casting
- NF A57-702:1981 PERMANENT MOULD CASTINGS AND SAND CASTINGS OF ALUMINIUM,ALUMINIUM ALLOYS. PROPERTIES.
- NF A57-703:1984 FOUNDRY PRODUCTS. PRESSURE DIE CASTINGS OF ALUMINIUM AND ALUMINIUM ALLOYS. PROPERTIES.
- NF A04-191-2*NF EN 1371-2:2015 Founding - Liquid penetrant testing - Part 2 : investment castings
- NF A57-711:1984 FOUNDRY PRODUCTS. ALUMINIUM,ALUMINIUM-MMAGNESIUM-AND ZINC. ALLOYS PRESSURE DIE CASTINGS. SUPPLYING.
- NF A00-501-8:1994 FOUNDRY PRODUCTS. GENERAL TECHNICAL CONDITIONS OF ORDER AND SUPPLY. PART 8 : INVESTMENT CASTINGS PRODUCED BY PLASTER OR CERAMIC MOULDING.
ZA-SANS, Die casting
American Society for Testing and Materials (ASTM), Die casting
- ASTM B93/B93M-09 Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
- ASTM B93/B93M-04 Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
- ASTM B93/B93M-00 Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
- ASTM B93/B93M-06 Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
- ASTM B93/B93M-03 Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
- ASTM B93/B93M-07 Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
- ASTM B93/B93M-21 Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
- ASTM B93/B93M-15 Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
- ASTM B179-96 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
- ASTM B806-08 Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
- ASTM B806-93a Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
- ASTM B618/B618M-07 Standard Specification for Aluminum-Alloy Investment Castings
- ASTM B85-03 Standard Specification for Aluminum-Alloy Die Castings
- ASTM B176-04 Standard Specification for Copper-Alloy Die Castings
- ASTM B618-03 Standard Specification for Aluminum-Alloy Investment Castings
- ASTM B618-06 Standard Specification for Aluminum-Alloy Investment Castings
- ASTM B85-02 Standard Specification for Aluminum-Alloy Die Castings
- ASTM B85-99 Standard Specification for Aluminum-Alloy Die Castings
- ASTM B176-95 Standard Specification for Copper-Alloy Die Castings
- ASTM B618-02e1 Standard Specification for Aluminum-Alloy Investment Castings
- ASTM B26/B26M-09 Standard Specification for Aluminum-Alloy Sand Castings
- ASTM B618/B618M-08 Standard Specification for Aluminum-Alloy Investment Castings
- ASTM B85/B85M-09 Standard Specification for Aluminum-Alloy Die Castings
- ASTM B108/B108M-11 Standard Specification for Aluminum-Alloy Permanent Mold Castings
- ASTM B108/B108M-12 Standard Specification for Aluminum-Alloy Permanent Mold Castings
- ASTM B108/B108M-12e1 Standard Specification for Aluminum-Alloy Permanent Mold Castings
- ASTM B94-05 Standard Specification for Magnesium-Alloy Die Castings
- ASTM B94-04 Standard Specification for Magnesium-Alloy Die Castings
- ASTM B86-98e1 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
- ASTM B403-07 Standard Specification for Magnesium-Alloy Investment Castings
- ASTM B403-12 Standard Specification for Magnesium-Alloy Investment Castings
- ASTM B618/B618M-14 Standard Specification for Aluminum-Alloy Investment Castings
- ASTM B26/B26M-14e1 Standard Specification for Aluminum-Alloy Sand Castings
- ASTM B85/B85M-10 Standard Specification for Aluminum-Alloy Die Castings
- ASTM B618/B618M-10 Standard Specification for Aluminum-Alloy Investment Castings
- ASTM B618/B618M-11a Standard Specification for Aluminum-Alloy Investment Castings
- ASTM B85/B85M-10e1 Standard Specification for Aluminum-Alloy Die Castings
- ASTM B85/B85M-13 Standard Specification for Aluminum-Alloy Die Castings
- ASTM B94-13 Standard Specification for Magnesium-Alloy Die Castings
- ASTM B199-07 Standard Specification for Magnesium-Alloy Permanent Mold Castings
- ASTM B199-12 Standard Specification for Magnesium-Alloy Permanent Mold Castings
- ASTM B894-99e1 Standard Specification for Zinc-Copper-Aluminum Alloy Die Castings
- ASTM B108-99 Standard Specification for Aluminum-Alloy Permanent Mold Castings
- ASTM B108-01a Standard Specification for Aluminum-Alloy Permanent Mold Castings
- ASTM B108-01 Standard Specification for Aluminum-Alloy Permanent Mold Castings
- ASTM B108-02 Standard Specification for Aluminum-Alloy Permanent Mold Castings
- ASTM A732/A732M-98e1 Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
- ASTM A732/A732M-05 Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
- ASTM B806-04 Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
- ASTM B806-02 Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
- ASTM B93/B93M-05 Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
- ASTM B86-05 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
- ASTM B102-00(2005) Standard Specification for Lead- and Tin-Alloy Die Castings
- ASTM B108/B108M-14 Standard Specification for Aluminum-Alloy Permanent Mold Castings
- ASTM B806-23 Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
- ASTM B806-05 Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
- ASTM B806-06 Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
- ASTM B806-08a Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
- ASTM B806-14 Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
- ASTM B892-01 Standard Specification for Zinc - Copper - Aluminum in Ingot Form for Die Castings
- ASTM B892-01e1 Standard Specification for Zinc - Copper - Aluminum in Ingot Form for Die Castings
- ASTM B892-10 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy in Ingot Form for Die Castings
- ASTM B240-10 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
- ASTM B806-93 Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
- ASTM B806-14(2022) Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
- ASTM B240-13 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
- ASTM A957/A957M-06 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
- ASTM A985/A985M-12a Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
- ASTM A985/A985M-11a Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
- ASTM A985/A985M-12 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
- ASTM A985/A985M-13 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
- ASTM B240-07 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
- ASTM B240-17 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
- ASTM B240-04e1 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
- ASTM B240-04 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
- ASTM E505-01(2006) Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings
- ASTM E505-96 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings
- ASTM A985/A985M-14 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
- ASTM A985/A985M-16 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
- ASTM B240-05 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
- ASTM B240-06 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
- ASTM B252-92(2004) Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
- ASTM A985/A985M-20 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
- ASTM A985/A985M-18 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
- ASTM A985/A985M-19 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
- ASTM A985-01 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
- ASTM A985/A985M-18a Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
- ASTM B252-92(1998) Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
- ASTM A997-08 Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
- ASTM A997/A997M-23 Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
- ASTM A997-08(2012) Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
- ASTM A997-07 Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
- ASTM A957/A957M-08 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
- ASTM A957/A957M-09 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
- ASTM A957/A957M-09a Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
- ASTM A957/A957M-21 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
- ASTM A823-99(2003) Standard Specification for Statically Cast Permanent Mold Gray Iron Castings
- ASTM A823-99 Standard Specification for Statically Cast Permanent Mold Gray Iron Castings
- ASTM B252-92(2014) Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings
- ASTM A957/A957M-15 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
- ASTM A823-99(2008) Standard Specification for Statically Cast Permanent Mold Gray Iron Castings
- ASTM A823-99(2012) Standard Specification for Statically Cast Permanent Mold Gray Iron Castings
- ASTM B199-99(2005) Standard Specification for Magnesium-Alloy Permanent Mold Castings
- ASTM B199-99 Standard Specification for Magnesium-Alloy Permanent Mold Castings
- ASTM B199-17 Standard Specification for Magnesium-Alloy Permanent Mold Castings
- ASTM B19-15 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
- ASTM A732/A732M-20 Standard Specification for Castings, Investment, Carbon and Low-Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
Korean Agency for Technology and Standards (KATS), Die casting
U.S. Military Regulations and Norms, Die casting
Society of Automotive Engineers (SAE), Die casting
- SAE AMS-QQ-A-591A-2009 Aluminum Alloy Die Castings
- SAE AMS-QQ-A-591A-2000 Aluminum Alloy Die Castings
- SAE AMS-T-81915A-2008 Titanium and Titanium-Alloy Castings, Investment
- SAE AMS4803D-2000 Zinc Alloy Castings, Die 4.0Al 0.04Mg (AG40A) As Cast
- SAE AMS5210A-1970 Castings, Investment, Electrical-Induction Melted, Annealed
- SAE AMS4490G-1988 Magnesium Alloy Castings, Die, 9.0Al 0.70Zn (AZ91A-F), As Cast (Reaffirmed: 01 Apr 1994)
- SAE AMS4291H-2010 Aluminum Alloy, Die Castings 8.5Si - 3.5Cu (A380.0-F) As Cast (UNS A13800)
- SAE AMS4290K-2005 Aluminum Alloy, Die Castings 9.5Si 0.50Mg, (360.0-F) (See AS 1990) As Cast
- SAE AMS4291G-2005 Aluminum Alloy, Die Castings 8.5Si - 3.5Cu (A390.0-F0) (See AS 1990) As Cast
- SAE AMS5353E-2014 Steel, Corrosion-Resistant, Investment Castings, 16Cr - 1.8Ni - 0.08N, as Cast
- SAE AMS5328D-1998 Steel Castings, Investment 0.80Cr - 1.8Ni - 0.35Mo (0.28 - 0.36C) (SAE 4330 Modified) Annealed J23260; R (2003)
- SAE AMS7918A-2008 Beryllium Aluminum Alloy Investment Castings 64.9Be - 30Al - 3Ag - 1Co - 0.75Ge As Cast
- SAE AMS4490H-2005 Magnesium Alloy Castings, Die 9.0Al - 0.70Zn (AZ91D, Temper F) As Cast Composition similar to UNS M11916
- SAE AMS4275D-1977 Castings, Permanent Mold, 6.2Sn 1Cu 1Ni, Stress Relieved
- SAE AMS5352F-2009 Steel, Corrosion Resistant, Investment Castings 17Cr 0.55Mo (0.95-1.20C) Annealed
- SAE AMS5387E-2011 Alloy, Corrosion and Heat Resistant, Investment Castings 60Co 29Cr 4.5W As Cast
- SAE AMS5385H-2008 Cobalt Alloy, Corrosion and Heat-Resistant, Investment Castings 62Co - 27Cr - 2.8Ni - 5.5Mo As-Cast UNS R30021
- SAE AMS5380G-2008 Cobalt Alloy, Corrosion and Heat-Resistant, Investment Castings 50.5Co - 26Cr - 15Ni - 6.0Mo As-Cast UNS R30030
- SAE AMS4286E-2001 Aluminum Alloy Castings, Permanent Mold 7Si 0.32Mg (356.0-T51) Precipitation Heat Treated
- SAE AMS5387D-2009 Alloy, Corrosion and Heat Resistant, Investment Castings 60Co 29Cr 4.5W As Cast
- SAE AMS5366E-2004 Steel, Corrosion and Heat-Resistant, Investment Castings 25Cr - 20Ni (CK-20) As-Cast
- SAE AMS4455G-2012 Magnesium Alloy, Investment Castings 10Al (AM100A-T6) Solution and Precipitation Heat Treated (UNS M10100)
- SAE AMS5349F-2019 Steel, Corrosion-Resistant, Investment Castings 13Cr Free Machining; Hardened and Tempered
- SAE AMS4455E-2006 Magnesium Alloy, Investment Castings 10Al (AM100A-T6) Solution and Precipitation Heat Treated UNS M10100
- SAE AMS4443G-2011 Magnesium Alloy, Sand Castings, 4.5Zn 0.75Zr (ZK51A-T5) Precipitation Heat Treated
- SAE AMS4991D-2010 Titanium Alloy Castings, Investment 6Al 4V Hot Isostatic Pressed, Anneal Optional
- SAE AMS4991E-2014 Titanium Alloy Castings, Investment 6Al - 4V Hot Isostatic Pressed, Anneal Optional
- SAE AMS5368D-2004 Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.0Ni - 2.3Mo - 0.09N Solution Heat Treated
- SAE AMS5396D-2005 Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 65Ni - 28Mo - 5.5Fe - 0.40V (N-12MV) As-Cast UNS N10001
- SAE AMS5396E-2013 Nickel Alloy, Corrosion and Heat Resistant, Investment Castings, 65Ni - 28Mo - 5.5Fe - 0.4V (N-12MV), As-Cast
- SAE AMS5396F-2014 Nickel Alloy, Corrosion and Heat Resistant, Investment Castings, 65Ni - 28Mo - 5.5Fe - 0.4V (N-12MV), As-Cast
- SAE AMS4260F-2006 Aluminum Alloy, Investment Castings 7.0Si - 0.32Mg (356.0-T6) Solution and Precipitation Heat Treated
- SAE AMS5336J-2022 Steel, Investment Castings 0.95Cr - 0.20Mo (0.25 - 0.35C) (4130 Mod) Normalized or Normalized and Tempered
- SAE AMS5338H-2022 Steel, Investment Castings 0.95Cr - 0.20Mo (0.35 - 0.45C) (4140 Mod) Normalized or Normalized and Tempered
- SAE AS586B-1993 Wheel and Brake (Sand and Permanent Mold) Castings Minimum Requirements for Aircraft Applications
- SAE AMS4453D-2006 Magnesium Alloy, Investment Castings 9.0Al - 2.0Zn (AZ92A-T6) Solution and Precipitation Heat Treated UNS M11920
- SAE AMS4442G-2012 Magnesium Alloy Sand Castings 3.2 Rare Earths - 2.5Zn - 0.70Zr (EZ33A-T5) Precipitation Heat Treated (UNS M12330)
- SAE AMS5338G-2013 Steel, Investment Castings, 0.95Cr - 0.20Mo (0.35 - 0.45C) (SAE 4140 Mod), Normalized or Normalized and Tempered
- SAE AMS4260F-2001 Aluminum Alloy, Investment Castings 7.0Si 0.32Mg (356.0-T6) Solution and Precipitation Heat Treated
- SAE AMS4260G-2008 Aluminum Alloy, Investment Castings 7.0Si 0.32Mg (356.0-T6) Solution and Precipitation Heat Treated
- SAE AMS5338E-2006 Steel, Investment Castings 0.95Cr - 0.20Mo (0.35 - 0.45C) (SAE 4140 Mod) Normalized or Normalized and Tempered
- SAE AMS5402C-2011 Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 62Ni - 21.5Cr - 9.0Mo - 3.6Cb (Nb) As Cast
- SAE AMS4452E-2012 Magnesium Alloy, Investment Castings 8.7Al 0.70Zn 0.22Mn (AZ 91C-T6) Solution and Precipitation Heat Treated
- SAE AMS5360F-2004 Steel, Corrosion and Heat-Resistant, Investment Castings 17Cr - 13Ni - 1.9Mo Solution Heat Treated UNS J92951
- SAE AMS5388H-2005 Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 53.3Ni - 16.5Cr - 17Mo - 4.5W - 5.8Fe - 0.40V (CW-12MW) As-Cast UNS N10002
- SAE AMS4281F-2001 Aluminum Alloy Castings, Permanent Mold 5.0Si 1.2Cu 0.5Mg (355.0-T6) Solution and Precipitation Heat Treated
- SAE AS586-1965 WHEEL AND BRAKE (SAND AND PERMANENT MOLD) CASTINGS — MINIMUM REQUIREMENTS FOR AIRCRAFT APPLICATIONS
- SAE AS586A-2002 Wheel and Brake (Sand and Permanent Mold) Castings - Minimum Requirements for Aircraft Applications
- SAE AMS5402B-1996 (R) Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 62Ni - 21.5Cr - 9.0Mo - 3.6Cb as Cast (UNS N26625)
- SAE AMS5336G-2009 Steel, Investment Castings 0.95Cr 0.20Mo (0.25-0.35C) (SAE 4130 Mod) Normalized or Normalized and Tempered
- SAE AMS4452C-2006 Magnesium Alloy, Investment Castings 8.7Al - 0.70Zn - 0.22Mn (AZ91C-T6) Solution and Precipitation Heat Treated UNS M11914
- SAE AMS5370D-2004 Steel, Corrosion and Heat-Resistant, Investment Castings 19Cr - 9.5Ni (CF-3) Solution Heat Treated
- SAE AMS5390E-2005 Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 47.5Ni - 22Cr - 1.5Co - 9Mo - 0.60W - 18.5Fe (N-12MV) As-Cast
- SAE AMS5338F-2009 Steel, Investment Castings 0.95Cr 0.20Mo (0.35-0.45C) (SAE 4140 Mod) Normalized or Normalized and Tempered
- SAE AMS5364C-2004 Steel, Corrosion and Heat-Resistant, Investment Castings 19.5Cr - 10.5Ni - 0.65Cb (CF-8C) Solution Heat Treated
- SAE AMS5391D-1995 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, INVESTMENT CASTINGS 73Ni - 13Cr - 4.5Mo - 2.3Cb - 0.75Ti - 6.0Al - 0.010B - 0.10Zr Vacuum Cast, As Cast
- SAE AMS5391F-2005 Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 73Ni - 0.14C - 13Cr - 4.5Mo - 2.3Cb - 0.75Ti - 6.0Al - 0.010B - 0.10Zr Vacuum Cast, As-Cast UNS N07713
- SAE AMS5376G-2002 Alloy, Corrosion and Heat Resistant, Investment Castings 30Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N As Cast UNS R30155
- SAE AMS5377D-1995 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, INVESTMENT CASTINGS 73Ni - 12Cr - 4.5Mo - 2.0Cb - 0.70Ti - 0.05C - 6.0Al - 0.010B - 0.10Zr Vacuum Cast, As Cast
- SAE AMS5377F-2004 Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 73Ni - 12Cr - 4.5Mo - 2.0Cb - 0.70Ti - 0.05C - 6.0Al - 0.010B - 0.10Zr Vacuum Cast, As-Cast
- SAE AMS5340D-1997 (R) Steel, Corrosion Resistant, Investment Castings 14Cr - 4.25Ni - 2.25Mo - 0.25Cb - 3.25Cu Homogenization and Solution Heat Treated UNS J92240
- SAE AMS5409-1984 Castings, Alloy-Investment, 61Ni 16Cr 8.5Co 1.8Mo 2.6W 0.8Cb 3.4Ti 1.8Ta 3.4Al 0.010B 0.06Zr (0.03-0.08C), Vacuum Melted, Vacuum Cast, As Cast
- SAE AMS5397C-1985 Alloy Castings, Investment, Corrosion and Heat Resistant 50Ni 9.5Cr 15Co 3.0Mo 4.8Ti 5.5Al 0.015B 0.95V 0.06Zr Vacuum Melted, Vacuum Cast, As Cast
- SAE AMS5350J-2011 Steel, Corrosion and Moderate Heat Resistant, Investment Castings 12.5Cr (SAE 51410) Hardened and Tempered
- SAE AMS5354F-2012 Steel, Corrosion and Heat Resistant, Investment Castings 13Cr 2.0Ni 3.0W Hardened and Tempered to 32 - 38 HRC
- SAE AMS5405A-2001 Alloy Castings, Investment, Corrosion and Heat Resistant 64Ni - 8.0Cr - 10Co - 6.0Mo - 1.0Ti - 4.2Ta - 6.0Al - 0.015B - 0.08Zr Vacuum Melted, Vacuum Cast as Cast
(U.S.) Ford Automotive Standards, Die casting
American National Standards Institute （ANSI), Die casting
Professional Standard - Aerospace, Die casting
European Committee for Standardization (CEN), Die casting
- EN 3548:1992 Aluminium Alloy AL-C21002 T7 Sand Castings
- EN 1753:1997 Magnesium and magnesium alloys - Magnesium alloy ingots and castings
Professional Standard - Aviation, Die casting
- HB 5430-1989 Stainless steel, heat-resistant steel investment castings
- HB 5001-1992 Technical Standards for Structural Steel Investment Castings
- HB 5001-2012 Specification for investment castings of structure steel for aviation
- HB 5312-1985 Standard for Copper Alloy Investment Castings for Aerospace
- HB 20040-2011 Specification for superalloy investment castings for aviation
- HB 5430-2011 Specification for investment castings of stainless steel and heat-resistant steel for aviation
Professional Standard-Ships, Die casting
- CB 20144-2014 Specification for beryllium aluminum alloy (BeAlAgCo) investment castings
TR-TSE, Die casting
- TS 1979-1975 MAGNESIUM ALLOY SAND CASTINGS - REFERENCE TEST BAR
International Organization for Standardization (ISO), Die casting
- ISO 2377:1972 Magnesium alloy sand castings; Reference test bar
- ISO 2379:1972 Aluminium alloy sand castings; Reference test bar
- ISO 16468:2005 Investment castings (steel, nickel alloys and cobalt alloys) - General technical requirements
- ISO 16468:2015 Investment castings (steel, nickel alloys and cobalt alloys) - General technical requirements
- ISO/CD 16468:1972 Investment castings (steel, nickel alloys and cobalt alloys) — General technical requirements
- ISO 10135:1994 Technical drawings - Simplified representation of moulded, cast and forged parts
- ISO 19959:2005 Visual examination of the surface condition of investment castings - Steel, nickel alloys and cobalt alloys
- ISO 19959:2020 Steels, nickel alloys and cobalt alloys investment castings — Visual testing of surface quality
Professional Standard - Military and Civilian Products, Die casting
- WJ 649-1995 Specification for investment castings for optical instruments
- WJ 2524-1998 Specifications for non-ferrous metal investment-castings for ordinance
- WJ 2336-1995 Specification for aluminum alloy plaster type investment castings for optical instruments
- WJ 930-1977 Die-casting mold parts for optical instruments Die-casting mold push rods for optical instruments
- WJ 933-1977 Die-casting mold parts for optical instruments Die-casting mold guide pillars for optical instruments
- WJ 934-1977 Die-casting mold parts for optical instruments Die-casting mold guide pillars for optical instruments
- WJ 935-1977 Die-casting mold parts for optical instruments Die-casting mold guide sleeves for optical instruments
- WJ 936-1977 Die-casting mold parts for optical instruments Die-casting mold guide sleeves for optical instruments
- WJ 937-1977 Die-casting mold parts for optical instruments Die-casting mold guide pins for optical instruments
- WJ 938-1977 Die-casting mold parts for optical instruments Die-casting mold guide pins for optical instruments
- WJ 940-1977 Die-casting mold parts for optical instruments Die-casting mold supports for optical instruments
- WJ 946-1977 Die-casting mold parts for optical instruments Die-casting mold stops for optical instruments
- WJ 947-1977 Die-casting mold parts for optical instruments Die-casting mold stops for optical instruments
- WJ 949-1977 Die-casting mold parts for optical instruments Die-casting mold plugs for optical instruments
- WJ 951-1977 Die-casting mold parts for optical instruments Die-casting mold sliders for optical instruments
- WJ 952-1977 Die-casting mold parts for optical instruments Die-casting mold sliders for optical instruments
- WJ 953-1977 Die-casting mold parts for optical instruments Die-casting mold sliders for optical instruments
- WJ 478-1995 Specification for investment castings for firearms, artillery and vehicles
- WJ 918-1977 Die-casting mold parts for optical instruments Die-casting mold splitter cones for optical instruments
- WJ 919-1977 Die-casting mold parts for optical instruments Die-casting mold splitter cones for optical instruments
- WJ 920-1977 Die-casting mold parts for optical instruments Die-casting mold splitter cones for optical instruments
- WJ 921-1977 Die-casting mold parts for optical instruments Die-casting mold splitter cones for optical instruments
- WJ 922-1977 Die-casting mold parts for optical instruments Sprue sleeves for die-casting molds for optical instruments
- WJ 923-1977 Die-casting mold parts for optical instruments Sprue sleeves for die-casting molds for optical instruments
- WJ 924-1977 Die-casting mold parts for optical instruments Sprue sleeves for die-casting molds for optical instruments
- WJ 925-1977 Die-casting mold parts for optical instruments Sprue sleeves for die-casting molds for optical instruments
- WJ 926-1977 Die-casting mold parts for optical instruments Sprue sleeves for die-casting molds for optical instruments
- WJ 927-1977 Die-casting mold parts for optical instruments Sprue sleeves for die-casting molds for optical instruments
- WJ 928-1977 Die-casting mold parts for optical instruments Sprue sleeves for die-casting molds for optical instruments
- WJ 929-1977 Die-casting mold parts for optical instruments Sprue sleeves for die-casting molds for optical instruments
- WJ 939-1977 Optical instrument die-casting mold parts Optical instrument die-casting mold guide nail set
- WJ 941-1977 Optical instrument die-casting mold parts Optical instrument die-casting mold right foot
- WJ 942-1977 Optical instrument die-casting mold parts Optical instrument die-casting mold left foot
- WJ 943-1977 Die-casting mold parts for optical instruments Die-casting mold parts for optical instruments
- WJ 944-1977 Die-casting mold parts for optical instruments Die-casting mold wedges for optical instruments
- WJ 945-1977 Die-casting mold parts for optical instruments Die-casting mold wedges for optical instruments
- WJ 948-1977 Optical instrument die-casting mold parts Optical instrument die-casting mold limit pin
- WJ 950-1977 Die-casting mold parts for optical instruments Die-casting mold slider handles for optical instruments
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Die casting
Japanese Industrial Standards Committee (JISC), Die casting
SAE - SAE International, Die casting
- SAE AMS4962-1998 Titanium Alloy@ Investment Castings 6AL - 4V Hot Isostatically Pressed
- SAE AMS4962B-2016 Titanium Alloy@ Investment Castings 6Al - 4V Hot Isostatically Pressed
- SAE AMS5353D-2007 Steel@ Corrosion-Resistant@ Investment Castings 16Cr - 1.8Ni - 0.08N As Cast (UNS J91651)
- SAE AMS5333G-2017 Steel@ Investment Castings 0.50Cr - 0.55Ni - 0.25Mo (0.11 - 0.17C) (SAE 8615) Normalized (UNS J11442)
- SAE AMS5366F-2018 Steel@ Corrosion and Heat-Resistant@ Investment Castings 25Cr - 20Ni (CK-20) As-Cast (UNS J94211)
- SAE AMS4455F-2011 Magnesium Alloy@ Investment Castings 10Al (AM100A-T6) Solution and Precipitation Heat Treated (UNS M10100)
- SAE AMS5334E-2007 Steel@ Investment Castings 0.50Cr - 0.55Ni - 0.20Mo (0.25 - 0.35C) (SAE 8630 Mod) Normalized and Tempered (UNS J13042)
- SAE AMS5334F-1996 Steel@ Investment Castings 0.50Cr - 0.55Ni - 0.20Mo (0.25 - 0.35C) (SAE 8630 Mod) Normalized and Tempered (UNS J13042)
- SAE AMS5334J-2018 Steel@ Investment Castings 0.50Cr - 0.55Ni - 0.20Mo (0.25 - 0.35C) (SAE 8630 Mod) Normalized and Tempered (UNS J13042)
- SAE AMS4455H-2019 Magnesium Alloy@ Investment Castings 10Al (AM100A-T6) Solution and Precipitation Heat Treated (UNS M10100)
- SAE AMS4260E-1994 Aluminum Alloy@ Investment Castings 7.0Si - 0.32Mg (356.0- T6) Solution and Precipitation Heat Treated (UNS A03560)
- SAE AMS4453G-2019 Magnesium Alloy@ Investment Castings 9.0Al - 2.0Zn (AZ92A-T6) Solution and Precipitation Heat Treated (UNS M11920)
- SAE AMS5360G-2018 Steel@ Corrosion and Heat-Resistant@ Investment Castings 17Cr - 13Ni - 1.9Mo Solution Heat Treated (UNS J92951)
- SAE AS586B-2005 Wheel and Brake (Sand and Permanent Mold) Castings - Minimum Requirements for Aircraft Applications
- SAE AS586C-2011 Wheel and Brake (Sand and Permanent Mold) Castings - Minimum Requirements for Aircraft Applications
- SAE AMS4452D-2011 Magnesium Alloy@ Investment Castings 8.7Al - 0.70Zn - 0.22Mn (AZ91C-T6) Solution and Precipitation Heat Treated (UNS M11914)
- SAE AMS5362L-2009 Steel@ Corrosion and Heat Resistant@ Investment Castings 19Cr - 12Ni - 1.0Cb (Nb) Solution Heat Treated (UNS J92811)
- SAE AMS5370E-2018 Steel@ Corrosion and Heat-Resistant@ Investment Castings 19Cr - 9.5Ni (CF-3) Solution Heat Treated (UNS J92620)
- SAE AMS4452F-2019 Magnesium Alloy@ Investment Castings 8.7Al - 0.70Zn - 0.22Mn (AZ91C-T6) Solution and Precipitation Heat Treated (UNS M11914)
- SAE AMS5357B-2001 Steel@ Corrosion Resistant@ Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution Heat Treated@ Precipitation Hardenable (UNS J92110)
- SAE AMS5362H-1993 Steel@ Corrosion and Heat Resistant@ Investment Castings 19Cr - 12Ni - 1.0 (Cb + Ta) Solution Heat Treated (UNS J92811)
- SAE AMS5357D-2017 Steel@ Corrosion-Resistant@ Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution Heat Treated@ Precipitation Hardenable (UNS J92110)
- SAE AMS5364D-2018 Steel@ Corrosion and Heat-Resistant@ Investment Castings 19.5Cr - 10.5Ni - 0.65Cb (CF-8C) Solution Heat Treated (UNS J92710)
- SAE AMS5340E-2018 Steel@ Corrosion Resistant@ Investment Castings 14Cr - 4.25Ni - 2.25Mo - 0.25Cb - 3.25Cu Homogenization and Solution Heat Treated (UNS J92240)
- SAE AMS5354G-2018 Steel@ Corrosion and Heat Resistant@ Investment Castings 13Cr - 2.0Ni - 3.0W Hardened and Tempered to 32 - 38 HRC (UNS J91631)
- SAE AMS5397D-2008 Alloy Castings, Investment, Corrosion and Heat Resistant 50Ni 9.5Cr 15Co 3.0Mo 4.8Ti 5.5Al 0.015B 0.95V 0.06Zr Vacuum Melted, Vacuum Cast, As Cast
British Standards Institution (BSI), Die casting
- BS 5338:1976 Code of practice for zinc alloy pressure die casting for engineering
- BS EN 1753:1997 Magnesium and magnesium alloys - Magnesium alloy ingots and castings
- BS EN 1371-1:2011 Founding. Liquid penetrant testing. Sand, gravity die and low pressure die castings
- BS EN 1371-1:1997 Founding - Liquid penetrant inspection - Sand, gravity die and low pressure die castings
- BS ISO 16468:2005 Investment castings (steel,nickel alloys and cobalt alloys) - General technical requirements
- BS ISO 16468:2015 Investment castings (steel, nickel alloys and cobalt alloys). General technical requirements
- BS ISO 19959:2005 Visual examination of the surface condition of investment castings - Steel, nickel alloys and cobalt alloys
- BS ISO 19959:2020 Tracked Changes. Steels, nickel alloys and cobalt alloys investment castings. Visual testing of surface quality
- BS ISO 8693:2011 Tools for moulding. Flat ejector pins
- 18/30355296 DC BS ISO 19959. Visual examination of the surface condition of investment castings. Steel, nickel alloys and cobalt alloys
- BS ISO 6751:2011 Tools for moulding. Ejector pins with cylindrical head
- BS ISO 8694:2011 Tools for moulding. Shouldered ejector pins
未注明发布机构, Die casting
- SAE AMS5387E-201512 Alloy, Corrosion and Heat Resistant, Investment Castings 60Co 29Cr 4.5W As Cast
- BS 3146-1:1974(1999) Specification for Investment castings in metal — Part 1 : Carbon and low alloy steels
German Institute for Standardization, Die casting
- DIN EN 1371-2:2015 Founding - Liquid penetrant testing - Part 2: Investment castings
- DIN 1687-4:1986 Heavy metal alloy raw castings; pressure die castings; general tolerances, machining allowances
- DIN 1688-4:1986 Light metal alloy raw castings; pressure die castings; general tolerances, machining allowances
RU-GOST R, Die casting
- GOST 16247-1970 Chill moulds. Devices for push of castings. Construction and dimensions
FI-SFS, Die casting
PL-PKN, Die casting
- PN H54556-1988 Fouadry machinery plant Permanent mould castings machines Safety requirements in construction
ES-UNE, Die casting
- SAE AMS5402D-2023 Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings 62Ni - 21.5Cr - 9.0Mo - 3.6Cb (Nb) As Cast
- SAE AMS5401C-2023 Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings 62Ni - 21.5Cr - 9.0Mo - 3.6Cb (Nb) Vacuum Melted, Vacuum Cast As Cast
IN-BIS, Die casting
Professional Standard - Petroleum, Die casting
- SY/T 5310-1987 General technical specifications for investment castings for petroleum drilling and production machinery products
Professional Standard - Machinery, Die casting
- JB/T 7162-2014 Rock drilling machines and pneumatic tools.General specifications for construction steel lost casting parts
- JB/T 7162-2004 General specifications for construction steel lost casting parts of rock drilling machines & pneumatic tools
- JB/T 7162-1993 General technical specifications for structural steel investment castings of rock drilling machinery and pneumatic tools
Aerospace, Security and Defence Industries Association of Europe (ASD), Die casting
- ASD-STAN PREN 3125-2001 Aerospace Series Aluminium Alloy AL-C42201 T6 Investment Casting a Less Than or Equal to 20 mm (Issue P 2)
United States Navy, Die casting
CU-NC, Die casting
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Die casting