ZH
RU
ES

mj thread and m thread

mj thread and m thread, Total:499 items.

In the international standard classification, mj thread and m thread involves: Screw threads, Fasteners for aerospace construction, Fasteners, Shafts and couplings, Vocabularies, Technical drawings, Cutting tools, Hand-held tools, Protective equipment, Valves, Linear and angular measurements.

Association Francaise de Normalisation, mj thread and m thread

NF EN 2943:2019 Série aérospatiale - Filets rapportés, filetages MJ et M - Spécification technique
NF L05-026:1988 Aerospace industry. ISO M and mj threads. Undercut relief and lead-in chamfers.
NF L24-980*NF EN 2943:2019 Aerospace series - Inserts, MJ and M screw threads, helical coil - Technical specification
NF L05-230-2:1990 AEROSPACE. MJ THREADS. PART 2 : LIMIT DIMENSIONS FOR BOLTS AND NUTS.
NF L22-455:2000 Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, reduced height, ISO M or ISO MJ threads, 4H tolerance class.
NF L22-457:2000 Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, ISO M or ISO MJ threads, 4H tolerance class.
NF L22-574:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, closed corner, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC.
NF L22-458:2000 Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, left-hand ISO M or ISO MJ threads, 4H tolerance class.
NF L22-442:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.
NF L22-433:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, normal height, normal across flats, ISO M or ISO MJ threads, 4H tolerance class.
NF L22-519:2000 Aircraft bolts and nuts - Bihexagonal nuts, self-locking, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 550 MPa (at ambient temperature) / 235 oC
NF EN 4619:2010 Série aérospatiale - Douilles filetées, à filetage MJ, à freinage interne, à clavettes auto-brochantes - Procédure d'installation et d'extraction
NF L22-570:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, 60 o corner, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC.
NF E03-005:1981 Pipe threads where pressure tight joints are not made on the threads (parallel internal and external threads).
NF EN 4620:2010 Série aérospatiale - Douilles filetées, à filetage MJ, à freinage interne, à clavettes auto-brochantes - Norme de conception
NF ISO 2901:2016 Filetages métriques trapézoïdaux ISO - Profils de base et nominal
NF L22-246:1989 Aircraft bolts and nuts. Bolt, bihexagonal head. ISO M thread. 4G class. Fine pitch.
NF L22-236:1989 Aircraft bolts and nuts. Bolt, bihexagonal head. ISO M thread 4G class.
NF L22-441:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, reduced across flats, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.
NF L22-568:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC.
NF EN 4621:2010 Série aérospatiale - Douilles filetées, à filetages MJ, à freinage interne à clavettes auto-brochantes - Spécification technique
NF E66-120:1975 Hand taps for pipe threads for parallel and taper threads.
NF L22-036:1989 Aerospace. Fasteners with ISO M thread or without thread (except rivets). Identification.
NF L22-526:1980 12 POINT SELF-LOCKING FLANGE NUTS IN E-Z 6 NCT 25 CORROSION RESISTING STEEL. MJ THREAD.
NF EN 148-3:1999 Appareils de protection respiratoire - Filetages pour pièces faciales - Partie 3 : raccord à filetage M 45 X 3
NF L22-590:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, 60 o corner, with counterbore, ISO M or ISO MJ threads,in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 oC.
NF L22-451:2000 Aircraft bolts and nuts - Nuts, hexagonal, slotted/castellated, normal height, ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter
NF L05-224:1990 Aircraft and aerospace. ISO M thread. Limiting profiles and ISO tolerances for bolts and nuts.
NF L22-440:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, 4H tolerance class.
NF L22-439:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, 4H tolerance class.
NF L22-436:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, left-hand ISO M or ISO MJ threads, 4H5H or 5H tolerance class according to diameter.
NF L22-573:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC.
NF L22-572:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature) / 235 oC.
NF L22-587:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 oC.
NF L22-589:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 oC.
NF L22-592:2000 Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature) / 425 oC.
NF L22-567:2001 Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambiant temperature) / 235 oC.
NF L22-462:2000 Aircraft bolts and nuts - Nuts, hexagonal, Plain, reduced height, normal across flats, with locking holes, left-hand ISO M or ISO MJ threads, fine pitch threads, 4H5H tolerance class
NF L22-461:2000 Aircraft bolts and nuts - Nuts, hexagonal, plain, reduced height, normal across flats, with locking holes, ISO M or ISO MJ threads, fine pitch threads, 4H5H tolerance class
NF L22-589:2020 Aircraft bolts and nuts - Nuts, anchor, self-locking, 90o corner, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperature)/425 oC
NF E03-004:1981 Pipe threads where pressure tight joints are made on the threads (tapered external thread and parallel internal thread).
NF EN ISO 6410-2:1996 Dessins techniques - Filetages et pièces filetées - Partie 2 : inserts filetés.
NF L22-296:1979 Slotted and drilled cheese head screws, fully threaded. ISO thread.

Military Standard of the People's Republic of China-General Armament Department, mj thread and m thread

GJB 3374-1998 Bolts with MJ thread
GJB 3373-1998 MJ threaded screws
GJB 3.2-1982 MJ threaded bolt and nut thread dimensions and tolerances
GJB 52-1985 MJ thread head and tail
GJB 3.2A-2015 MJ Threads Part 2: Limiting Dimensions of Bolt and Nut Threads
GJB 8618-2015 GH2132 General specification for MJ threaded bolts and screws
GJB 3.3-1985 Dimensions and tolerances of MJ threaded pipe fittings threads
GJB 3.4-1985 Dimensions and tolerances of threads of MJ threaded structural parts
GJB 3377-1998 Shear resistant MJ thread high locking nut
GJB 3.5-1985 MJ thread calculation formula
GJB 3.1-1982 MJ thread basic profile
GJB 3.3A-2003 MJ threads Part 3: Limiting dimensions of pipe fitting threads
GJB 3.3A-2015 MJ threads Part 3: Limiting dimensions of pipe fitting threads
GJB 3.1A-2015 MJ threads Part 1: General requirements
GJB 3376-1998 General specification for MJ threaded alloy steel and stainless steel bolts and screws

Professional Standard - Aerospace, mj thread and m thread

QJ 2760.2-1995 MJ Thread Ring Gauge Double Handle MJ Thread Ring Gauge
QJ 2760.1-1995 MJ Thread Ring Gauge Shankless MJ Thread Ring Gauge
QJ 2759.1-1995 MJ Thread Plug Gauge Integral MJ Thread Plug Gauge
QJ 2759.5-1995 MJ thread plug gauge single head double handle type MJ thread plug gauge
QJ 2759.3-1995 MJ thread plug gauge double-ended steel ball fixed MJ thread plug gauge
QJ 2759.2-1995 MJ thread plug gauge double-ended taper locking type MJ thread plug gauge
QJ 2759.4-1995 MJ thread plug gauge single head steel ball fixed MJ thread plug gauge
QJ 2090-1991 MJ threaded fasteners 1100MPa/235°C pan head short threaded bolts
QJ 2085-1991 MJ threaded fasteners 1100MPa/235°C countersunk head short thread bolts
QJ 1977-1990 MJ threaded fasteners 1100MPa/235℃ hexagon head short thread bolts
QJ 2091-1991 MJ threaded fasteners 1100MPa/235°C pan head close tolerance short thread bolts
QJ 2086-1991 MJ threaded fasteners 1100MPa/235℃ countersunk head tight tolerance short thread bolts
QJ 1978-1990 MJ threaded fasteners 1100MPa/235℃ hexagon head close tolerance short thread bolts
QJ 2770-1995 MJ Thread 1100MPa/235℃Titanium Alloy Hexagon Head Close Tolerance Short Thread Bolts
QJ 2738.3-1995 MJ Thread Tap Short Shank Nut Tap
QJ 2738.4-1995 MJ Thread Tap Long Shank Nut Tap
QJ 2741-1995 MJ thread 1100MPa/235℃ double-ended stud (bm=1.5d)
QJ 2742-1995 MJ thread 1100MPa/235℃ double-ended stud (bm=2d)
QJ 2743-1995 MJ thread 1100MPa/235℃ equal length double-ended stud
QJ 2740-1995 MJ thread 1100MPa/235℃ double-ended stud (bm=1d)
QJ 1983-1990 MJ Thread Fastener Logo
QJ 1750-1989 Test method for MJ threaded fastener bolts
QJ 2083-1991 MJ threaded fasteners 1100MPa/235℃ countersunk head bolts
QJ 2087-1991 MJ threaded fasteners 1100MPa/235℃ countersunk head screws
QJ 2088-1991 MJ threaded fasteners 1100MPa/235℃ pan head bolts
QJ 2092-1991 MJ Thread Fastener 1100MPa/235℃ Pan Head Screw
QJ 2771-1995 MJ Thread 1100MPa/235℃ Titanium Alloy Pan Head Screws
QJ 2772-1995 MJ Thread 1100MPa/235℃Titanium Alloy Countersunk Screws
QJ 2739-1995 MJ thread tap technical conditions
QJ 2761-1995 MJ Thread Gauge Application Dimensions
QJ 2762-1995 MJ Thread Gauge Specifications
QJ 2602-1994 Technical conditions for MJ thread 1100MPa titanium alloy bolts
QJ 1975-1990 MJ threaded fasteners 1100MPa/235℃ hex head bolts
QJ 2769-1995 MJ thread 1100MPa/235℃ titanium alloy hex head bolts
QJ 1749-1989 Shape and position tolerances of MJ threaded fastener nuts
QJ 1748-1989 Shape and position tolerances of bolts for MJ threaded fasteners
QJ 2420-1992 MJ threaded fastener 1100MPa/235℃ hexagonal self-locking nut
QJ 1981-1990 MJ Thread Fastener 1100MPa/235℃ Hexagon Slotted Nut
QJ 1979-1990 MJ threaded fasteners 1100MPa/235℃ hexagonal ordinary nuts
QJ 1747-1989 Strength classification and temperature classification of bolts and nuts for MJ threaded fasteners
QJ 2089-1991 MJ threaded fasteners 1100MPa/235℃ pan head tight tolerance bolts
QJ 2826-1996 MJ Thread Titanium Alloy Flat Head Close Tolerance High Lock Bolts
QJ 1980-1990 MJ threaded fasteners 900MPa/235℃ hexagonal ordinary book nuts
QJ 1982-1990 MJ Thread Fastener 900MPa/235℃ Hexagon Slotted Thin Nut
QJ 2084-1991 MJ threaded fasteners 1100MPa/235℃ countersunk head tight tolerance bolts
QJ 2920-1997 Bottom hole diameter before MJ internal thread tapping
QJ 1757-1989 Technical conditions of 1100MPa alloy steel bolts for MJ threaded fasteners
QJ 2825-1996 MJ Thread Titanium Alloy Small Countersunk Head Tight Tolerance High Lock Bolts
QJ 2410-1992 MJ threaded fasteners 1100MPa/235℃ self-locking nuts with one ear plate
QJ 2412-1992 MJ threaded fasteners 1100MPa/235℃ self-locking nuts with two lugs
QJ 1976-1990 MJ threaded fasteners 1100MPa/235℃ hexagon head tight tolerance bolts
QJ 2738.1-1995 MJ thread tap short handle machine, hand tap
QJ 2738.2-1995 MJ thread tap long handle machine, hand tap
QJ 2414-1992 MJ threaded fasteners 1100MPa/235°C 90° angled plate self-locking nut
QJ 2417-1992 MJ threaded fastener 1100MPa/235℃Single lug floating pallet self-locking nut
QJ 2418-1992 MJ threaded fasteners 1100MPa/235℃ self-locking nuts with two lugs and floating pallets
QJ 1758-1989 Specifications for 1100MPa heat-resistant stainless steel bolts for MJ threaded fasteners

American Society of Mechanical Engineers (ASME), mj thread and m thread

ASME B1.3-1941 Screw Thread Gaging Systems for Acceptability:Inch and Metric Screw Threads (UN,UNR,UNJ,M,MJ)
ASME B1.3-2007(R2022) Screw Thread Gaging Systems for Acceptability: Inch & Metric Screw Threads (UN,UNR,UNJ,M,MJ)
ASME B1.3M-1992 Screw thread gaging systems for dimensional acceptability - Inch and metric screw threads (UN, UNR, UNJ, M, and MJ)
ASME B1.3M Errata-1994 Screw thread gaging systems for dimensional acceptability - Inch and metric screw threads (UN, UNR, UNJ, M, and MJ); Errata
ASME B1.21M-1997(R2018) Metric Screw Threads: MJ Profile
ASME B1.21M-1978 Metric screw threads - MJ profile
ASME B1.21M-1997(R2008) Metric Screw Threads: MJ Profile
ASME B1.21M-1997 Metric Screw Threads: MJ Profile
ASME B1.13M-1995 Metric screw threads - M profile
ASME B1.13M-2005 Metric Screw Threads: M Profile
ASME B1.13M-2001 Metric screw threads: M profile
ASME B1.13M-2005(R2020) Metric Screw Threads: M Profile
ASME B1.13M-1983 Metric Screw Threads: M Profile
ASME B1.13M-1979 Metric Screw Threads: M Profile
ASME B1.3-2007 Screw Thread Gaging Systems for Acceptability: Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)
ASME B1.3-2007(R2017) Screw Thread Gaging Systems for Acceptability: Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)
ASME B1.16M-1984(R2016) Gages and Gaging for Metric M Screw Threads
ASME B1.22M-1985(R2016) Gages and Gaging for MJ Series Metric ScrewThreads
ASME B18.6.5M-2000 Metric thread-forming and thread-cutting tapping screws
ASME B18.6.5M-1986 Metric thread forming and thread cutting tapping screws

Professional Standard - Aviation, mj thread and m thread

HB 7417～7420-1996 MJ thread short thread small hex head bolts
HB 8240-2002 Reduced hexagon nuts with nuts
HB 8240～HB 8242-2002、HB 8223-2002 MJ thread small hex nut
HB 7450～7451-1996 MJ Thread Flat Head Screws
HB 7410～7413-1996 MJ Thread Hex Head Bolts
HB 7434～7435-1996 MJ Thread Flat Head Bolts
HB 7444～7447-1996 MJ Thread Hex Head Screws
HB 8223-2002 Small hexagonal nut with MJ thread (8223)
HB 8241-2002 Small hexagonal nut with MJ thread (8241)
HB 8242-2002 Small hexagonal nut with MJ thread (8242)
HB 7443-1996 Theoretical weight of MJ threaded bolts
HB 6400-1990 MJ Thread Ordinary Hex Nuts
HB 7415-1996 MJ thread polished rod tolerance with f9 short thread hexagon head bolts
HB 7416-1996 MJ thread polished rod tolerance with r6 short thread hexagon head bolts
HB 20133-2012 Nut, self-locking, decagon, MJ thread, GH4738
HB 6508-2005 Hi-lock,shear,with MJ thread
HB 8239-2002 Insert acorn nuts with MJ thread
HB 8033-2002 Hexagon ladder bolts with MJ thread
HB 8051-2002 Nuts, insert,self-locking, with MJ thread
HB 8238-2002 Small hexagonal nut with MJ thread and blind hole
HB 8248-2002 Small hexagonal thin nut with MJ thread (8248)
HB 8249-2002 Small hexagonal thin nut with MJ thread (8249)
HB 8250-2002 Small hexagonal thin nut with MJ thread (8250)
HB 8251-2002 Small hexagonal thin nut with MJ thread (8251)
HB 8234-2002 MJ thread hexagon thick self-locking nut
HB 7362-1996 MJ thread small twelve head bolts
HB 7431～7433-1996 MJ Thread Cross Recessed Flat Head Bolts
HB 7436～7437-1996 MJ thread oblate head cone end bolts
HB 7448～7449-1996 MJ Thread Cross Recessed Pan Head Screws
HB 8247-2002 Small hexagonal thin nut with MJ thread (8247)
HB 6827-1993 MJ thread inspection method
HB 7421-1996 MJ thread polished rod tolerance band f9 short thread small hexagon head bolts
HB 7422～7424-1996 MJ thread polished rod tolerance band h8 short thread small hexagon head bolts
HB 8252-2002 Reduced hexagon slotted thick nuts with MJ thread
HB 8052-2002 Reduced hexagon thick slotted nuts with MJ thread
HB 8053-2002;HB 8063-2002 Self-locking corner anchor nuts with MJ thread
HB 8054-2002 Self-locking two-lug anchor nuts with MJ thread
HB 8055-2002 Self-locking,single-lug anchor nuts with MJ thread
HB 8058-2002 Self-locking,two lug anchor nuts, with MJ thread
HB 8059-2002 Self-locking,corner anchor nuts, with MJ thread
HB 8063-2002 Corner anchor self-locking nut with MJ thread
HB 8232-2002 Hexagonal thick self-locking nut with MJ thread (8232)
HB 8236-2002 Hexagonal thin self-locking nut with MJ thread (8236)
HB 8237-2002 Free anchor self-locking nut with MJ thread
HB 8244-2002 Small thin hexagonal nut with MJ thread (8244)
HB 8245-2002 Small thin hexagonal nut with MJ thread (8245)
HB 8246-2002 Small thin hexagonal nut with MJ thread (8246)
HB 8254-2002 Small hexagonal grooved nut with MJ thread (8254)
HB 8255-2002 Small hexagonal grooved nut with MJ thread (8255)
HB 8269-2002 Hexagonal thick self-locking nut with MJ thread (8269)
HB 8293-2002 Small thin hexagonal nut with MJ thread (8293)
HB 20067-2011 Bolts, short MJ threads, flat head, for big interfere fit
HB 20066-2011 Bolts, long MJ threads, flat head, for big interfere fit
HB 8053-2002 MJ thread angle bracket self-locking nut
HB 7438-1996 MJ thread cross recessed 100° countersunk head bolts
HB 7438-2013 MJ thread cross recessed 100° countersunk head bolts
HB 8382-2013 GH2132 MJ thread twelve angle self-locking nut
HB 8383-2013 GH4738 MJ thread twelve angle self-locking nut
HB 8243-2002 Small thin hexagonal nut with MJ thread (8243)
HB 8253-2002 Small hexagonal grooved nut with MJ thread (8253)
HB 8235-2002 Hexagonal thin self-locking nut with MJ thread (8235)
HB 7247-1995 Specifications for thread milling cutters for machining titanium alloy MJ threads
HB 7442-1996 MJ thread polished rod tolerance band r6 short thread cross recessed 100° countersunk head bolts
HB 7441-1996 MJ thread polished rod tolerance band h8 short thread cross recessed 100° countersunk head bolts
HB 8045-2002 Self-locking hexagon,slotted,thick nuts with MJ thread
HB 8046～8048-2002 Self-locking hexagon,slotted,thick nuts with MJ thread
HB 8049-2002 Self-locking hexagon,slotted,thin nuts with MJ thread
HB 8050-2002 Self-locking hexagon,slotted,thin nuts with MJ thread
HB 8064-2002 Self-locking,floating,right angle anchor nuts with MJ thread
HB 8257-2002 Small hexagonal grooved thin nut with MJ thread (8257)
HB 8258-2002 Small hexagonal grooved thin nut with MJ thread (8258)
HB 8259-2002 Small hexagonal grooved thin nut with MJ thread (8259)
HB 20065-2011 Bolts, short MJ threads, 90° countresunk head, for big interfere fit
HB 20064-2011 Bolts, long MJ threads, 90° countresunk head, for big interfere fit
HB 8256-2002 Small hexagonal grooved thin nut with MJ thread (8256)
HB 6826-1993 MJ external thread adjustment standard parts
HB 8025-2002 General specification for MJ thread bolts and screws,in titanium alloy TC16
HB 8034-2002 90°countersunk head ladder bolts with MJ thread,slotted
HB 8056-2002 Self-locking,single-lug double holes anchor nuts, with MJ thread
HB 8057-2002 Self-locking,single-lug single holes anchor nuts, with MJ thread
HB 8061-2002 Self-locking,sealed,two lug anchor nuts, with MJ thread
HB 8062-2002 Self-locking,sealed,corner anchor nuts, with MJ thread
HB 8046-2002 Hexagonal grooved thick self-locking nut with MJ thread (8046)
HB 8047-2002 Hexagonal grooved thick self-locking nut with MJ thread (8047)
HB 8048-2002 Hexagonal grooved thick self-locking nut with MJ thread (8048)
HB 7440-1996 MJ Thread Cross Recessed 100° Countersunk Taper Bolts
HB 8387-2013 Self-locking nuts for double lugs traveling plate with MJ thread
HB 7425～7427-1996 MJ thread polished rod tolerance f7 short thread small hexagon head bolts for hinge connection
HB 7428～7430-1996 H6 short thread small hexagon head bolts with MJ thread smooth rod tolerance for hinge connection
HB 8338-2013 TC4 thread tolerance with 6e head 2 fuse holes MJ thread hex head screw
HB 6387-1990 Blank diameter before MJ thread rolling
HB 7414-1996 MJ thread polished rod tolerance with f9 hex head bolts
HB 8355-2013 TC4 thread tolerance with 6e head 2 fuse holes MJ long thread hex head bolts
HB 8060-2002 Self-locking,sealed,single lug,double holes anchor nuts, with MJ thread
HB 8369-2013 Aluminum alloy light shear type MJ thread high lock nut
HB 8386-2013 GH2132 MJ thread ten angle self-locking nut with countersink
HB 6818-1993 MJ external thread cone, V-type middle diameter measuring tool
HB 6819-1993 MJ external thread arc type middle diameter measuring tool
HB 7246-1995 Set type thread milling cutter for processing titanium alloy MJ thread d=40~100mm P=1.00~3.00mm
HB 7454-1997 General specification for MJ threaded alloy steel and stainless steel bolts and screws
HB 20135-2012 Nut, self-locking double hexagon, counterbored, MJ thread, GH4738
HB 8384-2013 GH2132 MJ thread twelve angle self-locking nut with countersink
HB 6825-1993 Technical conditions of measuring tool for pitch diameter of MJ external thread
HB 6817-1993 MJ external thread complete pitch diameter measuring tool
HB 7243-1995 Morse taper shank thread milling cutter for processing titanium alloy MJ thread d=10.0~20.0mm P=0.75~2.50mm
HB 7439-1996 MJ thread polished rod tolerance f9 cross recessed 100° countersunk head bolts
HB 8370-2013 Aluminum Light Duty Shear Resistant Sealed MJ Thread High Lock Nuts
HB 8372-2013 Aluminum alloy light shear resistant spherical MJ thread high lock nut
HB 8374-2013 Stainless steel light tensile type sealed MJ thread high lock nut
HB 8376-2013 Stainless steel light tensile type spherical MJ thread high lock nut
HB 8356-2013 TC4 thread tolerance with 4h6h polished rod tolerance with f9 head 1 fuse hole MJ extended thread hex head bolt

CH-SNV, mj thread and m thread

SEV 3031-1963
SN 213 163-1979
VSM 10840-1973
SNV 24568-1957
VSM 15363.2-1955
VSM 34217.1-1938
VSM 14050-1944
SN ISO 3521:1984 Plastics — Polyester and epoxy casting resins — Determination of total volume shrinkage
SN 640 280-1985
VSM 15355-1955
SNV 742 401.9-1971
VSM 15285-1967
VSM 12041-1967
SEV 138-1938
SN 198 604-1990 Textile floor coverings: Test Programm for the Classification into Suitability Ranges
SN ISO 105/P01:1984 Textiles — Tests for colour fastnessSection E03: Colour fastness to chlorinated water (swimming-bath water)
SNV 24776-1937
VSM 15327.2-1956 Feste KupplungenTyp P (Paβschrauben)mit langen Nabenfür zylindrische Wellenenden1)Hauptabmessungen für Schraubenkreisdurchmesserk = 400 ... 1200 mm
VSM 13190.4-1967
SN 198 602-1990 Textile Floor Coverings - Suitability ranges
VSM 12262-1927
VSM 33650-1969
SN ISO 898/1:1981 Textiles — Tests for colour fastness Section Z02: Colour fastness to metals in the dye-bath:hon and copper
VSM 23780-1973
SNV 81509-1952
SNV 137 202.4-1970
VSM 11857-1974
SEV 3044-1964
SNV 57610-1949
SN 234 340-1982 Shell end mills with tenon drive
SN 210 901/2-1983 Textile Floor Coverings - Suitability ranges
VSM 10875-1936
VSM 13179-1968
SN 591 385/11-1990 Testing of Textiles: Twist of Ring-Spun Yarns - Determination by Simple Untwist I Retwist Method

SE-SIS, mj thread and m thread

SIS SMS 1373-1963
SIS SMS 272-1929
SIS SMS 1568-1953
SIS SMS 1538-1952
SIS SMS 1524-1950
SIS SS 2628-1989 Lubricating nipples M, R- and S-threads
SIS SS-EN 148-3-1992 Respiratory protective devices — Threads for facepieces — Thread connection M 45x3
SIS SMS 1970-1969 Grub screws. M, UNC and UNF screw threads. Tolerance dass 1
SIS SMS-199-1928
SIS SMS 1536-1952
SIS SS-ISO 5855-2:1990 Aerospace — MJ threads — Part 2: Limit dimensions for bolts and nuts
SIS SS-ISO 5855/2:1983 Aerospace construction - MJ threads - Part 2: Dimensions for bolts and nuts
SIS SMS 1710-1960
SIS SS 1702-1980 Screw threads and screw thread tolerances — Terminology
SIS SMS 1702-1966 Screw threads and screw thread tolerances. Vocabulary
SIS SMS 2187-1967 Slotted grub screws with cone point. Melric screw threads. Coarse pitch
SIS SMS 2188-1967 Slotted griib screws with cup point. Metric screw threads. Coarse pitch

American National Standards Institute （ANSI), mj thread and m thread

ANSI/ASME B1.3-2007 Screw Thread Gaging Systems for Dimensional Acceptability – Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)
ANSI/ASME B1.21M-1997 Metric Screw Threads – MJ Profile
ANSI/ASME B1.13M-2005 Metric Screw Threads: M Profile
ANSI/ASME B1.3M-1992 Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)
ANSI/ASME B1.16M-1984 Gages and Gaging for Metric M Screw Threads
ANSI/ASME B18.6.5M-1999 Metric Thread Forming and Thread Cutting Tapping Screws

British Standards Institution (BSI), mj thread and m thread

BS EN 2943:2019 Aerospace series. Inserts, MJ and M screw threads, helical coil. Technical specification
22/30453793 DC BS EN 2943. Aerospace series. Inserts, MJ and M screw threads, helical coil. Technical specification
18/30377545 DC BS EN 2943. Aerospace series. Inserts, MJ and M screw threads, helical coil, Technical specification
BS A 324:1998 Nuts, bihexagonal, self-locking, MJ threads, classifications: 1100 MPa (at ambient temperature)/425°C, 1100 MPa (at ambient temperature)/650°C, 1210 MPa (at ambient temperature)/425°C, 1210 MPa (at ambient temperature)/730°C, 1550 MPa (at ambient t...
BS ISO 10959:2000 Aerospace - MJ threads - Gauging
BS EN ISO 6410-2:1996 Technical drawings. Screw threads and threaded parts. Screw thread inserts
BS 3A 212:1993 Specification for cadmium-plated steel bolts, 55/65 tonf/in2 (Unified hexagons, 3A Unified threads and close tolerance shanks)
BS A 327:1998 Nuts, bihexagonal, self-locking, with counterbore and MJ threads, classifications: 1100 MPa (at ambient temperature)/425°C, 1100 MPa (at ambient temperature)/650°C, 1210 MPa (at ambient temperature)/425°C, 1210 MPa (at ambient temperature)/730°C, 1...
BS 919-2:2007 Screw gauge limits and tolerances – Part 2: Specification for gauges for screw threads of Whitworth and B.A. forms
2A 231-1993 Rolled threads for bolts. Lead and runout requirements

ES-UNE, mj thread and m thread

UNE-EN 2943:2019 Aerospace series - Inserts, MJ and M screw threads, helical coil - Technical specification (Endorsed by Asociación Española de Normalización in January of 2020.)

未注明发布机构, mj thread and m thread

BS EN 2943:2019(2020) Aerospace series — Inserts, MJ and M screw threads, helical coil — Technical specification
BS EN 148-3:1999(2000) Respiratory protective devices — Threads for facepieces — Part 3 : Thread connection M 45 × 3

German Institute for Standardization, mj thread and m thread

DIN EN 2943:2020-04 Aerospace series - Inserts, MJ and M screw threads, helical coil - Technical specification; German and English version EN 2943:2019 / Note: To be replaced by DIN EN 2943 (2022-07).
DIN EN 2943:2023-08 Aerospace series - Insert, MJ and M screw threads, helical coil - Technical specification; German version ASD-STAN prEN 2943:2023 / Note: Date of issue 2023-06-30*Intended as replacement for DIN EN 2943 (2020-04).
DIN EN 2943:2020 Aerospace series - Inserts, MJ and M screw threads, helical coil - Technical specification; German and English version EN 2943:2019
DIN 65532:1984 Aerospace; runouts, undercuts and thread ends for MJ-threads to DIN ISO 5855
DIN 65451:2003-11 Aerospace - Thread inserts, with MJ thread, locked, screw-locking, steel; Classification: 900 MPa/1100 MPa/235 °C
DIN 65532:1984-07 Aerospace; runouts, undercuts and thread ends for MJ-threads to DIN ISO 5855
DIN 65501:2001 Aerospace - Shims for anchor nuts with MJ-thread
DIN 65397:2003-11 Aerospace - Thread inserts, with MJ thread, locked, screw-locking, corrosion-resisting steel; Classification: 1100 MPa/315 °C/425 °C
DIN 65394:2003-11 Aerospace - Thread inserts, with MJ thread, ring locked, screw-locking, corrosion-resisting steel; Classification: 900 MPa/1100 MPa/1250 MPa/1550 MPa/315 °C/425 °C
DIN EN 2943:2022 Aerospace series - Inserts, MJ and M screw threads, helical coil - Technical specification; English version prEN 2943:2022
DIN 65393:2002-11 Aerospace - Thread inserts with MJ thread, ring locked, screw-locking, steel; Classification: 900 MPa/1100 MPa/1250 MPa/1550 MPa/235 °C
DIN 76-3:1977 Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch
DIN 65208:2016 Aerospace series - Testing of locking torques for nuts and related threaded parts with MJ thread - Test bolts
DIN 65500:1984 Aerospace; nuts, hexagon, thin, with MJ-thread, aluminium alloy
DIN 65501:2016-12 Aerospace series - Shims for anchor nuts with MJ-thread
DIN 7998:1975 Threads and Thread Ends for Wood Screws
DIN 7998:1975-02 Threads and Thread Ends for Wood Screws
DIN 2244:2002 Screw threads - Terms and screw thread elements for parallel screw threads
DIN 2244:2002-05 Screw threads - Terms and screw thread elements for parallel screw threads
DIN ISO 5855-2 Berichtigung 1:2020-01 Aerospace - MJ threads - Part 2: Limit dimensions for bolts and nuts (ISO 5855-2:1999); Text in German and English; Corrigendum 1
DIN ISO 5855-2:2009-07 Aerospace - MJ threads - Part 2: Limit dimensions for bolts and nuts (ISO 5855-2:1999); Text in German and English
DIN 65208:2016-11 Aerospace series - Testing of locking torques for nuts and related threaded parts with MJ thread - Test bolts
DIN 65501:2016 Aerospace series - Shims for anchor nuts with MJ-thread
DIN 65191:2002-11 Aerospace - Inserts for composite materials with MJ thread, threaded part floating and screw-locking, corrosion-resisting steel
DIN EN 148-3:1999-04 Respiratory protective devices - Threads for facepieces - Part 3: Thread connection M 45 × 3; German version EN 148-3:1999
DIN ISO 6410-2:1993 Technical drawings; screw threads and threaded parts; screw thread inserts; identical with ISO 6410-2:1993
DIN 65398:2021 Aerospace series - Thread inserts, with MJ thread, locked, screw-locking, corrosion-resisting steel, classification: 900 MPa/1 100 MPa/315 °C; Text in German and English
DIN 65509:1984 Aerospace; nuts, hexagon, with MJ-thread, steel, class: 1100 MPa/235 °C
DIN 16261:2004-07 PN 16 cocks with female/female and female/male connection for pressure gauges / Note: To be replaced by DIN 16261 (2019-07), DIN 16261 (2023-02).
DIN 16261:2023-02 PN 16 cocks with female/female and female/male connection for pressure gauges / Note: Date of issue 2023-01-13*Intended as replacement for DIN 16261 (2004-07).
DIN 2999-1:1983 Pipe threads for tubes and fittings; parallel internal thread and taper external thread; tread dimensions
DIN 65330:1987-08 Aerospace; hexagon bolts, with MJ thread, short thread, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 °C
DIN 65391:2002-11 Aerospace - Press nuts with MJ thread, self-locking, corrosion-resisting steel; Classification: 1100 MPa/315 °C/425 °C
DIN 16261:2004 PN 16 cocks with female/female and female/male connection for pressure gauges
DIN 65510:1984 Aerospace; nuts, hexagon, thin, with MJ-thread steel, classification: 1100 MPa/235 °C
DIN 65268:1986 Aerospace; bolts hexagon with MJ thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C
DIN 65524:1984-07 Aerospace; heaxagon bolts, with MJ-thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C
DIN 40431-2:1972-11 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Plug Gauges
DIN 40431-1:1970-11 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Ring Gauges
DIN 65392:2002-11 Aerospace - Press nuts with MJ thread, self-locking, floating, steel; Classification: 1100 MPa/235 °C
DIN 65534:1992-09 Aerospace; nuts, hexagon, with MJ-thread, corrosion resisting steel; classification: 1100 MPa/650 °C
DIN 65524:1984 Aerospace; heaxagon bolts, with MJ-thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C
DIN 40431-2:1972 Steel Conduit Thread; Thread Gauges, "Go" and "Not go" Thread Plug Gauges
DIN 86103:2019-09 Sockets for screwed ends with metric fine thread and Whitworth pipe thread
DIN 3858:1988 Whitworth pipe threads for pipe couplings; parallel internal threads and taper external threads; thread dimensions
DIN 65516:1984 Aerospace; cheese head bolts with internal serration thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C
DIN 65527:1984 Aerospace; hexagon bolts, close tolerance, with MJ-thread, short thread, steel, nominal tensile stregth 1100 MPa, for temperatures up to 235 °C
DIN 405-3:1997 General purpose knuckle threads - Part 3: Gauges for external and internal thread; types of gauges, profiles, tolerances

SAE - SAE International, mj thread and m thread

SAE MA1370-1989 Screw Threads - MJ Profile@ Metric
SAE MA3288A-2018 NUT@ PLAIN HEX – UNS S66286@ MJ THREAD@ METRIC
SAE AS1370-1979 METRIC SCREW THREADS - MJ PROFILE
SAE MA3350A-2018 NUT@ CASTELLATED@ HEX - UNS S66286@ MJ THREAD@ METRIC
SAE MA3376A-1986 Bolts & Screws@ UNS G87400 860 MPa@ MJ Thread@ Procurement Specification for@ Metric
SAE MA3344A-2018 NUT@ PLAIN HEX - THIN@ UNS S66286 MJ THREAD@ METRIC
SAE MA3425-1985 Nut@ Castellated@ Hex - UNS G87400@ Cadmium Plate@ MJ Thread@ Metric (FSC 5310; UNS G87400; Reaffirmed Noncurrent Sept 2001)
SAE MA3426A-2016 NUT, CASTELLATED, HEX - UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA3422A-2016 NUT, PLAIN HEX - UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA3302-1985 Nut@ Plain Hex - UNS G87400@ Cadmium Plate@ MJ Thread@ Metric
SAE MA3375D-2018 STUDS, UNS S66286 900 MPa, MJ Thread, Procurement Specification for, Metric
SAE MA3421-1985 Nut@ Plain Hex - Drld@ UNS G87400@ Cadmium Plate@ MJ Thread@ Metric (UNS G87400; Reaffirmed Noncurrent Sept 2001)
SAE MA3421A-2007 Nut@ Plain Hex - Drld@ UNS G87400@ Cadmium Plate@ MJ Thread@ Metric
SAE MA3302A-1996 Nut@ Plain Hex - UNS G87400@ Cadmium Plate@ MJ Thread@ Metric (Reaffirmed Noncurrent November 2001; UNS G87400;)
SAE MA3302B-2010 NUT@ PLAIN HEX - UNS G87400@ CADMIUM PLATE@ MJ THREAD@ METRIC
SAE MA3286B-1987 BOLT@ MACHINE-HEX HEAD-PD SHANK-MJ THREAD@ AMS 5731@ METRIC
SAE MA3286B-2004 Bolt@ Machine-Hex Head-PD Shank-MJ Thread@ AMS 5731@ Metric
SAE MA3424A-2016 NUT, PLAIN HEX - THIN, UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA3350-1985 Nut@ Castellated@ Hex - UNS S66286@ MJ Thread@ Metric (FSC 5310; UNS S66286)
SAE MA3354-1985 Nut@ Plain Hex - Thin@ UNS G87400@ Cadmium Plate@ MJ Thread@ Metric
SAE MA3423-1985 Nut@ Plain Hex - Drld@ UNS S66286@ Silver Plate@ MJ Thread@ Metric
SAE MA3433-1989 Nut@ Self Locking - Shank UNS N07001@ Silver Plate@ MJ Thread@ Metric (FSC 5310)
SAE MA3286A-1990 Bolt@ Machine-Hex Head-PD Shank-MJ Thread@ AMS 5731@ Metric
SAE MA3302C-2014 NUT@ PLAIN HEX - UNS G87400@ CADMIUM PLATE@ MJ THREAD@ METRIC
SAE MA3286C-2018 Bolt@ Machine-Hex Head-PD Shank-MJ Thread@ AMS 5731@ Metric
SAE MA3421B-2013 NUT@ PLAIN HEX - DRLD@ UNS G87400@ CADMIUM PLATE@ MJ THREAD@ METRIC
SAE MA3423A-2015 NUT@ PLAIN HEX - DRLD@ UNS S66286@ SILVER PLATE@ MJ THREAD@ METRIC
SAE MA3354B-2010 NUT@ PLAIN HEX - THIN@ UNS G87400@ CADMIUM PLATE@ MJ THREAD@ METRIC
SAE MA3428B-2016 NUT, CASTELLATED, HEX - THIN, UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA3422-1985 Nut@ Plain Hex - UNS S66286@ Silver Plate@ MJ Thread@ Metric (UNS S66286)
SAE MA1566B-2018 Gaging Practice and Gage Requirements for MJ Metric Screw Threads
SAE MA3430-1990 Nut@ Self Locking-Reduced Hex Drive@ AMS-6322@ Cadmium Plated@ MJ Thread@ Metric (FSC 5310; Reaffirmed Noncurrent Sept 2001)
SAE MA3289B-2009 BOLT@ MACHINE-HEX HEAD-PD SHANK MJ THREAD@ AMS6322@ CADMIUM PLATE@ METRIC
SAE MA3424-1985 Nut@ Plain Hex - Thin@ UNS S66286@ Silver Plate@ MJ Thread@ Metric (UNS S66286)
SAE MA3430A-2007 NUT@ SELF LOCKING-REDUCED HEX DRIVE@ AMS 6322@ CADMIUM PLATED@ MJ THREAD@ METRIC
SAE MA3289A-1996 Bolt@ Machine-Hex Head-PD Shank MJ Thread@ AMS 6322@ Cadmium Plate@ Metric
SAE MA3289-1987 Bolt@ Machine-Hex Head- PD Shank MJ Thread@ AMS 6322@ Cadmium Plate@ Metric
SAE MA3430B-2013 NUT@ SELF LOCKING-REDUCED HEX DRIVE@ AMS 6322@ CADMIUM PLATED@ MJ THREAD@ METRIC
SAE MA3289C-2014 BOLT@ MACHINE-HEX HEAD-PD SHANK MJ THREAD@ AMS6322@ CADMIUM PLATE@ METRIC
SAE MA1568A-2018 Nut@ Self Locking - UNS S66286@ 425°C & 650°C@ 1100 MPa@ MJ Thread@ Procurement Specification For@ Metric

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, mj thread and m thread

GJB 5879-2006 Specification for bolts and screws, MJ thread, Corrosion and resistant steel GH 2132

Society of Automotive Engineers (SAE), mj thread and m thread

SAE MA3288-1985 NUT, PLAIN HEX - UNS S66286, MJ THREAD, METRIC
SAE MA3288-2012 NUT, PLAIN HEX – UNS S66286, MJ THREAD, METRIC
SAE MA1370-2018 Screw Threads - MJ Profile, Metric
SAE MA3350-2012 NUT, CASTELLATED, HEX - UNS S66286, MJ THREAD, METRIC
SAE MA3344-2012 NUT, PLAIN HEX - THIN, UNS S66286 MJ THREAD, METRIC
SAE MA3433-2006 NUT, SELF LOCKING - SHANK UNS N07001, SILVER PLATE MJ THREAD, METRIC
SAE MA3433A-2014 Nut, Self Locking - Shank UNS N07001, Silver Plate MJ Thread, Metric
SAE MA3374-1995 BOLTS & SCREWS, UNS S66286 650°C, 900 MPa, MJ Thread, Procurement Specification for, Metric
SAE MA3375-1981 STUDS, A-286 CRES Roll Threaded After Heat Treatment, Procurement Specification for, Metric
SAE MA3426-2006 NUT, CASTELLATED, HEX - UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA3375A-1995 STUDS, UNS S66286 900 MPa, MJ Thread, Procurement Specification for, Metric
SAE MA3422-2006 NUT, PLAIN HEX - UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA3425B-2013 Nut, Castellated, Hex-UNS G87400, Cadmium Plate, MJ Thread, Metric
SAE MA3426B-2021 NUT, CASTELLATED, HEX - UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA3422B-2021 NUT, PLAIN HEX - UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA3425-2006 NUT, CASTELLATED, HEX - UNS G87400, CADMIUM PLATE, MJ THREAD, METRIC
SAE MA3302A-1985 Nut, Plain Hex-UNS G87400, Cadmium Plate, MJ Thread, Metric
SAE MA3302A-2006 NUT, PLAIN HEX - UNS G87400, CADMIUM PLATE, MJ THREAD, METRIC
SAE MA3354A-2006 NUT, PLAIN HEX - THIN, UNS G87400, CADMIUM PLATE, MJ THREAD, METRIC
SAE MA3424-2006 NUT, PLAIN HEX - THIN, UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA3423-2006 NUT, PLAIN HEX - DRLD, UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA3421-2006 NUT, PLAIN HEX - DRLD, UNS G87400, CADMIUM PLATE, MJ THREAD, METRIC
SAE MA3286A-2001 BOLT, MACHINE-HEX HEAD-PD SHANK-MJ THREAD, AMS 5731, METRIC
SAE MA3286-1995 BOLT, MACHINE-HEX HEAD-PD SHANK-MJ THREAD, AMS 5731, METRIC
SAE MA3424A-2020 NUT, PLAIN HEX - THIN, UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA1370-1990 Screw Threads - MJ Profile, Metric [Superseded: SAE AS 1370A]
SAE MA2039-1986 PLUG, MJ THREAD, O-RING SEAL, AMS 5640
SAE MA3354C-2014 NUT, PLAIN HEX - THIN, UNS G87400, CADMIUM PLATE, MJ THREAD, METRIC
SAE MA3428-2006 NUT, CASTELLATED, HEX - THIN, UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA3427-2006 NUT, CASTELLATED, HEX - THIN, UNS G87400, CADMIUM PLATE, MJ THREAD, METRIC
SAE MA3354-2001 Nut, Plain Hex-Thin, UNS G87400, Cadmium Plate, MJ Thread, Metric
SAE MA3428C-2021 NUT, CASTELLATED, HEX - THIN, UNS S66286, SILVER PLATE, MJ THREAD, METRIC
SAE MA2521A-2023 NUT - HEX, PORT FITTING CONNECTOR, AMS5639, MJ THREAD, METRIC
SAE MA1566A-1992 Gaging Practice and Gage Requirements for MJ Metric Screw Threads
SAE MA1566-1980 GAGING PRACTICE AND GAGE REQUIREMENTS FOR MJ METRIC SCREW THREADS
SAE MA1566A-2012 Gaging Practice and Gage Requirements For MJ Metric Screw Threads
SAE MA3344-1985 Nut, Plain Hex - Thin, UNS S66286, MJ Thread, Metric FSC 5310; UNS S66286
SAE MA2521-2012 NUT - HEX, PORT FITTING CONNECTOR, AMS 5639, MJ THREAD, METRIC
SAE MA3289A-2006 BOLT, MACHINE-HEX HEAD-PD SHANK MJ THREAD, AMS 6322, CADMIUM PLATE, METRIC
SAE AS4861-2002 BUSHING, PIPE, INTERNAL AND EXTERNAL THREAD
SAE MA1943-1987 NUT, SELF LOCKING - UNS N07001, 760°C, 1250 MPa & 1100 MPa, MJ THREAD, PROCUREMENT SPECIFICATION FOR, METRIC
SAE MA1568-2012 Nut, Self Locking - UNS S66286, 425°C & 650°C, 1100 MPa, MJ Thread, Procurement Specification For, Metric
SAE AMS7473F-1991 Bolts and Screws Roll Threaded

CZ-CSN, mj thread and m thread

CSN 25 4130-1964 Master gauges for thread calliper gauges. Metric thread M 3 to M 100
CSN 25 4128-1964 Limit thread calliper gauges. Metric thread M 3 to M 100
CSN ON 22 8708-1966

International Organization for Standardization (ISO), mj thread and m thread

ISO 5855-2:1999 Aerospace - MJ threads - Part 2: Limit dimensions for bolts and nuts
ISO 10959:2000 Aerospace - MJ threads - Gauging
ISO 10959:2016 Aerospace - MJ threads - Gauging
ISO 5855-2:1981 Aerospace construction — MJ threads — Part 2: Dimensions for bolts and nuts
ISO 5855-2:1988 Aerospace; MJ threads; part 2: limit dimensions for bolts and nuts

BE-NBN, mj thread and m thread

NBN 553 F-1966
NBN 623 F-1966
NBN 643-F-1966
NBN 644-F-1966
NBN-EN 148-3-1992 Respiratory protective devices. Threads for facepieces. Thread connection M 45 x 3
NBN 646-F-1966
NBN 555 F-1966

Korean Agency for Technology and Standards (KATS), mj thread and m thread

KS W ISO 10959:2005 Aerospace-MJ threads-Gauging
KS W ISO 10959-2005(2015) Aerospace－MJ threads－Gauging
KS W ISO 10959:2016 Aerospace－MJ threads－Gauging
KS W 1551-2001 Aerospace-MJ threads-Part 2:Limit dimensions for bolts and nuts
KS W ISO 5855-2:2005 Aerospace－MJ threads－Part 2：Limit dimensions for bolts and nuts
KS B 0245-1987(2022) Thread Run-Outs and Thread Undercuts for External Threaded Fasteners
KS B ISO 6410-2-2014(2019) Technical drawings — Screw threads and threaded parts — Part 2: Screw thread inserts

ZA-SANS, mj thread and m thread

SANS 1700-2-22:2004 Fasteners Part 2: Screw threads Section 22: Aerospace - MJ threads - Limit dimensions for bolts and nuts
SANS 1700-2-21:2004 Fasteners Part 2: Screw threads Section 21: Aerospace - MJ threads - General requirements

AT-ON, mj thread and m thread

ONORM M 2012-1983 Tapped holes and screwed plugs with metric pipe thread, fine, for pipe unions, jitüngs and screw plugs; design dimensions
ONORM M 1530-1979 Thread and thread endsfor wood screws
ONORM M 1900-1980 Sealing rings for screwed pipe ions and screw plugs
ONORM M 1804-1987 Thread ends and lengths of holt ends for metric ISO-threads

Danish Standards Foundation, mj thread and m thread

DS/EN 148-3:1992 Respiratory protective devices. Threads for facepieces. Thread connection M 45 x 3
DS/EN 148-3:1999 Respiratory protective devices - Threads for facepieces - Part 3: Thread connection M 45 x 3
DS/ISO 6410-2:1995 Technical drawings - Screw threads and threaded parts - Part 2: Screw thread inserts
DS/EN ISO 6410-2:1996 Technical drawings - Screw threads and threaded parts - Part 2: Screw threads inserts

AIA/NAS - Aerospace Industries Association of America Inc., mj thread and m thread

NA0271-1997 Procurement Specification@ Metric Fasteneers@ CRES 300 Series@ Externally Threaded@ MJ Thread@ 500MPa Ftu and 700MPa Ftu

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, mj thread and m thread

GB/T 42180-2022 A286 bihexagonal head bolts with long length MJ threads for aerospace
GB/T 42179-2022 MJ thread spline-drive self-locking nuts for aerospace

RO-ASRO, mj thread and m thread

STAS 3508/5-1980 THREAD RUN-OUT AND UNDERCUT ISO trapezoidal screw thread and buttress thread
STAS 3508/2-1970 SCREW THREAD RUNOUT AND UNDERCUT Pipe thread
STAS 2298-1983 Serew cutting tools STRAIGHT COMBS FOR ISO METRIC THREAD AND GAZ THREAD WITH THREAD PACKING

IN-BIS, mj thread and m thread

IS 10980 Pt.2-1984

Aerospace Industries Association, mj thread and m thread

AIA NA 0271-1997 Procurement Specification, Metric Fasteneers, CRES 300 Series, Externally Threaded, MJ Thread, 500MPa Ftu and 700MPa Ftu FSC 5305

Japanese Industrial Standards Committee (JISC), mj thread and m thread

JIS B 1006:1985 Thread run-outs and thread undercuts for external threaded fasteners
JIS B 0002-2:1998 Technical drawings -- Screw threads and threaded parts -- Part 2: Screw thread inserts

IT-UNI, mj thread and m thread

UNI 4649-1961

FI-SFS, mj thread and m thread

VN-TCVN, mj thread and m thread

TCVN 5907-1995 Screw threads and threaded parts.General conventions

YU-JUS, mj thread and m thread

JUS M.B1.035-1979 ISO exterml metric trapezoidal screw threads, knuckle screw threads and other screw threads ofcoarse pitches. Runouts and undercuts
JUS M.B1.036-1979 SO internat trapezoidal screw threads, knuckle screw treads and other screw threa?s of coarse pitches. Runouts and undercuts

NL-NEN, mj thread and m thread

NEN-ISO 6410-2:1994 Technical drawings.Screw threads and threaded parts.Part 2:Screw thread inserts

KP-CSK, mj thread and m thread

KPS 102-2-2002 Technical drawings-Screw threads and threaded parts-Part 2:Screw thread inserts

TH-TISI, mj thread and m thread

TIS 2406.2-2008 Technical drawings.screw threads and threaded parts.part 2: screw thread inserts