ZH
RU
ES

Composition of acetate plastic

Composition of acetate plastic, Total:259 items.

In the international standard classification, Composition of acetate plastic involves: Plastics, Materials for aerospace construction, Rubber and plastics products, Tobacco, tobacco products and related equipment, Materials and articles in contact with foodstuffs, Pipeline components and pipelines, Fertilizers, Company organization and management, Fuels, Medical equipment, Beverages, Paint ingredients.

European Committee for Standardization (CEN), Composition of acetate plastic

EN ISO 1597:1999 Plastics - Unplasticized Cellulose Acetate - Determination of Acetic Acid Yield ISO 1597: 1994
EN ISO 1598:1999 Plastics - Cellulose Acetate - Determination of Insoluble Particles
EN ISO 1061:1999 Plastics - Unplasticized Cellulose Acetate - Determination of Free Acidity
EN ISO 1599:1999 Plastics - Cellulose Acetate - Determination of Viscosity Loss on Moulding ISO 1599: 1990
EN ISO 1157:1999 Plastics - Cellulose Acetate in Dilute Solution - Determination of Viscosity Number and Viscosity Ratio ISO 1157: 1990
EN ISO 1600:1999 Plastics - Cellulose Acetate - Determination of Light Absorption on Moulded Specimens Produced Using Different Periods of Heating
EN ISO 585:1999 Plastics - Unplasticized Cellulose Acetate - Determination of Moisture Content
EN ISO 24026-2:2020 Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24026-2:2020)
EN ISO 9369:1997 Plastics - Basic Materials for Polyurethanes - Pure Isocyanates - Analysis of Isocyanate Groups ISO 9369: 1997; Superseded by EN ISO 14986: 2001
EN 13130-8:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 8: Determination of isocyanates in plastics
EN ISO 24026-1:2020 Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 24026-1:2020)

International Organization for Standardization (ISO), Composition of acetate plastic

ISO 1597:1975 Plastics; Unplasticized cellulose acetate; Determination of acetic acid yield
ISO 1597:1994 Plastics - Unplasticized cellulose acetate - Determination of acetic acid yield
ISO/R 872:1968 Plastics — Determination of ash of unplasticized cellulose acetate
ISO 1599:1975 Plastics — Cellulose acetate — Determination of viscosity loss on moulding
ISO 8985:2022 Plastics — Ethylene/vinyl acetate copolymer (EVAC) thermoplastics — Determination of vinyl acetate content
ISO 585:1982 Plastics - Non-plasticized cellulose acetate - Determination of moisture content
ISO 1061:1975 Plastics — Unplasticized cellulose acetate — Determination of free acidity
ISO 1159:1978 Plastics; Vinyl chloride-vinyl acetate copolymers; Determination of vinyl acetate
ISO 4613-1:1985 Plastics — Ethylene/vinyl acetate copolymer thermoplastics (E/VAC) — Part 1: Designation
ISO 1598:1975 Plastics — Cellulose acetate — Determination of insoluble particles
ISO 1600:1975 Plastics — Cellulose acetate — Determination of light absorption before and after heating
ISO 4613-2:1989 Plastics; Ethylene/vinyl acetate copolymer (E/VAC) thermoplastics; part 2: preparation of test specimens and determination of properties
ISO 3499:1976 Plastics; Aqueous dispersions of homopolymers and copolymers of vinyl acetate; Determination of bromine number
ISO 1157:1975 Plastics — Cellulose acetate in dilute solution — Determination of viscosity number and viscosity ratio
ISO 21301-1:2019 Plastics — Ethylene-vinyl acetate (EVAC) moulding and extrusion materials — Part 1: Designation system and basis for specifications
ISO 21301-2:2019 Plastics — Ethylene-vinyl acetate (EVAC) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 1157:1990 Plastics; cellulose acetate in dilute solution; determination of viscosity number and viscosity ratio
ISO 21305-2:2019 Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 3451-3:1984 Plastics; Determination of ash; Part 3 : Unplasticized cellulose acetate
ISO 585:1990 Plastics; unplasticized cellulose acetate; determination of moisture content
ISO 294-3:2020 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 3: Small plates
ISO 21305-1:2019 Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 1: Designation system and basis for specification
ISO 2114:1996 Plastics - Unsaturated polyester resins - Determination of partial acid value and total acid value
ISO 24026-2:2020 Plastics — Poly(methyl methacrylate) (PMMA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 9369:1997 Plastics - Basic materials for polyurethanes - Pure isocyanates - Analysis of isocyanate groups
ISO 294-2:2018 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 2: Small tensile bars
ISO 24026-1:2020 Plastics — Poly(methyl methacrylate) (PMMA) moulding and extrusion materials — Part 1: Designation system and basis for specifications
ISO 1628-4:1986 Plastics; Determination of viscosity number and limiting viscosity number; Part 4 : Polycarbonate (PC) moulding and extrusion materials

未注明发布机构, Composition of acetate plastic

BS EN ISO 1597:2000 Plastics - Unplasticized cellulose acetate - Determination of acetic acid yield
BS EN ISO 1061:1999(2001) Plastics — Unplasticized cellulose acetate — Determination offree acidity
BS EN ISO 1157:2000 Plastics - Cellulose acetate in dilute solution - Determination of viscosity number and viscosity ratio
BS EN ISO 4613-2:1995(2004) Plastics — Ethylene / vinyl acetate (E / VAC) moulding and extrusion materials — Part 2 : Preparation oftest specimens and determination ofproperties
DIN EN ISO 294-2:1998 Plastics — Injection molding of test specimens of thermoplastic materials — Part 2: Small tensile bars
BS EN ISO 2114:2000(2002)*BS 2782-4-Method 432B:2000 Plastics (polyester resins) and paints and varnishes (binders) — Determination of partial acid value and total acid value

Japanese Industrial Standards Committee (JISC), Composition of acetate plastic

JIS K 7192:1999 Plastics -- Ethylene/vinyl acetate copolymer (EVAC) thermoplastics -- Determination of vinyl acetate content
JIS K 7372:2000 Plastics -- Vinyl chloride-vinyl acetate copolymers -- Determination of vinyl acetate
JIS K 6924-2:1996 Plastics -- Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6719-2:1999 Plastics -- Polycarbonate (PC) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 7250-2:2002 Plastics -- Determination of ash -- Part 2: Poly (alkylene terephthalate) materials

Danish Standards Foundation, Composition of acetate plastic

DS/EN ISO 1599:1999 Plastics - Cellulose acetate - Determination of viscosity loss on moulding
DS/EN ISO 585:1999 Plastics - Unplasticized cellulose acetate - Determination of moisture content
DS/EN ISO 1061:2000 Plastics - Unplasticized cellulose acetate - Determination of free acidity
DS/EN ISO 1598:1999 Plastics - Cellulose acetate - Determination of insoluble particles
DS/EN ISO 4613-1:1999 Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 1: Designation and specification
DS/EN ISO 4613-2/A1:2004 Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
DS/EN ISO 4613-2:1996 Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
DS/EN ISO 1600:1999 Plastics - Cellulose acetate - Determination of light absorption on moulded specimens produced using different periods of heating
DS/EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
DS/EN ISO 7391-2:2006 Plastics – Polycarbonate (PC) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties
DS/EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates
DS/EN ISO 294-2/A1:2005 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars
DS/EN ISO 294-2:1999 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars.
DS/EN ISO 7391-1:2006 Plastics – Polycarbonate (PC) moulding and extrusion materials – Part 1: Designation system and basis for specifications
DS/EN ISO 10724-2:2000 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2: Small plates
DS/EN ISO 294-1/A1:2002 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens
DS/EN ISO 294-1:1999 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens
DS/EN 637:1995 Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method

German Institute for Standardization, Composition of acetate plastic

DIN EN ISO 1599:2000-02 Plastics - Cellulose acetate - Determination of viscosity loss on moulding (ISO 1599:1990); German version EN ISO 1599:1999
DIN EN ISO 8985:2022-11 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO 8985:2022, Corrected version 2022-08); German version EN ISO 8985:2022
DIN EN ISO 585:2000-02 Plastics - Unplasticized cellulose acetate - Determination of moisture content (ISO 585:1990); German version EN ISO 585:1999
DIN EN ISO 1061:2000-02 Plastics - Unplasticized cellulose acetate - Determination of free acidity (ISO 1061:1990); German version EN ISO 1061:1999
DIN EN ISO 1598:1999-09 Plastics - Cellulose acetate - Determination of insoluble particles (ISO 1598:1990); German version EN ISO 1598:1999
DIN EN ISO 21301-1:2019-05 Plastics - Ethylene-vinyl acetate (EVAC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21301-1:2019); German version EN ISO 21301-1:2019
DIN EN ISO 21301-2:2019-05 Plastics - Ethylene-vinyl acetate (EVAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21301-2:2019); German version EN ISO 21301-2:2019
DIN ISO 3451-3:1991 Plastics; determination of ash; unplasticized cellulose acetate; identical with ISO 3451-3:1984
DIN EN ISO 21301-1:2017 Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 1: Designation and specification (ISO/DIS 21301-1:2017); German and English version prEN ISO 21301-1:2017
DIN EN ISO 21301-2:2019 Plastics - Ethylene-vinyl acetate (EVAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21301-2:2019)
DIN 53742:1971 Testing of Plastics; Determination of the Vinyl Acetate Content of Copolymers of Vinyl Chloride and Vinyl Acetate; Infrared Spectrographic Method
DIN EN ISO 21301-2:2017 Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO/DIS 21301-2:2017); German and English version prEN ISO 21301-2:2017
DIN EN ISO 1600:2000-05 Plastics - Cellulose acetate - Determination of light absorption on moulded specimens produced using different periods of heating (ISO 1600:1990); German version EN ISO 1600:1999
DIN CEN/TS 13130-9:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 9: Determination of acetic acid, vinyl ester in food simulants; German version CEN/TS 13130-9:2005
DIN EN ISO 1598:1999 Plastics - Cellulose acetate - Determination of insoluble particles (ISO 1598:1990); German version EN ISO 1598:1999
DIN EN ISO 294-4:2019-04 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2018); German version EN ISO 294-4:2019
DIN EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2018)
DIN EN ISO 294-3:2020-11 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020); German version EN ISO 294-3:2020
DIN EN ISO 21305-2:2019-05 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21305-2:2019); German version EN ISO 21305-2:2019
DIN 86128-3:2021 Pipe couplings – Part 3: Pipe couplings intended for connecting pipes and fittings made of plastic-plastic/plastic-metal
DIN EN ISO 294-4:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO/FDIS 294-4:2018); German and English version prEN ISO 294-4:2018
DIN 16922:1981 Flexible sheet materials manufactured using plastics; technological classification
DIN EN ISO 21305-1:2019-05 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21305-1:2019); German version EN ISO 21305-1:2019
DIN 86128-3:2021-04 Pipe couplings Part 3: Pipe couplings intended for connecting pipes and fittings made of plastic-plastic/plastic-metal
DIN EN ISO 2114:2002-06 Plastics (polyester resins) and paints varnishes (binders) - Determination of partial acid value and total acid value (ISO 2114:2000); German version EN ISO 2114:2000
DIN EN ISO 294-2:2019-03 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018); German version EN ISO 294-2:2018
DIN EN ISO 21305-2:2019 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21305-2:2019)
DIN EN ISO 21305-1:2019 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21305-1:2019)
DIN EN ISO 2114 Berichtigung 1:2006-11 Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value (ISO 2114:2000); German version EN ISO 2114:2000, Corrigenda to DIN EN ISO 2114:2002-06; German version EN ISO 2114:2000/AC:2005
DIN 53477:2018-09 Testing of plastics - Determination of particle size distribution of moulding materials by dry sieving analysis
DIN EN 637:1994-08 Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method; German version EN 637:1994
DIN EN ISO 21305-1:2017 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO/DIS 21305-1:2017); German and English version prEN ISO 21305-1:2017
DIN EN ISO 21305-2:2017 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO/DIS 21305-2:2017); German and English version prEN ISO 21305-2:2017

British Standards Institution (BSI), Composition of acetate plastic

BS EN ISO 8985:2022 Plastics. Ethylene/vinyl acetate copolymer (EVAC) thermoplastics. Determination of vinyl acetate content
BS EN ISO 8985:1998 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content
BS EN ISO 1061:1999 Plastics - Unplasticized cellulose acetate - Determination of free acidity
20/30409956 DC BS EN ISO 8985. Plastics. Ethylene/vinyl acetate copolymer (EVAC) thermoplastics. Determination of vinyl acetate content
BS EN ISO 1599:1999 Plastics - Cellulose acetate - Determination of viscosity loss on moulding
BS 2782-4 Method 470C:1991 Methods of testing plastics. Chemical properties. Determination of ash of unplasticized cellulose acetate
BS EN ISO 4613-2:1996 Plastics. Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO 21301-1:2019 Tracked Changes. Plastics. Ethylene-vinyl acetate (EVAC) moulding and extrusion materials. Designation system and basis for specifications
BS EN ISO 21301-2:2019 Plastics. Ethylene-vinyl acetate (EVAC) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 585:1991 Plastics. Unplasticized cellulose acetate. Determination of moisture content
BS EN ISO 585:1999 Plastics - Unplasticized cellulose acetate - Determination of moisture content
BS EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Determination of moulding shrinkage
BS ISO 16869:2008 Plastics - Assessment of the effectiveness of fungistatic compounds in plastics formulations
BS ISO 7510:2017 Plastics piping systems. Glass-reinforced plastics (GRP) components. Determination of the amounts of constituents
BS EN 637:1995 Plastics piping systems. Glass-reinforced plastics components. Determination of the amounts of constituents using the gravimetric method

ES-UNE, Composition of acetate plastic

UNE-EN ISO 8985:2022 Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO 8985:2022, Corrected version 2022-08)
UNE-EN ISO 21301-1:2020 Plastics - Ethylene-vinyl acetate (EVAC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21301-1:2019)
UNE-EN ISO 21301-2:2020 Plastics - Ethylene-vinyl acetate (EVAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21301-2:2019)
UNE-EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2018)
UNE-EN ISO 21305-2:2020 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21305-2:2019)
UNE-EN ISO 21305-1:2020 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21305-1:2019)

Association Francaise de Normalisation, Composition of acetate plastic

NF T51-820:1998 Plastics. Ethylene/vinyl acetate copolymer (EVAC) thermoplastics. Determination of vinyl acetate content.
NF EN ISO 8985:2022 Plastiques - Copolymères éthylène/acétate de vinyle (EVAC) thermoplastiques - Dosage de l'acétate de vinyle
NF T51-351:1985 Plastics. Determination of ash. Unplasticized cellulose acetate.
NF EN ISO 1599:1999 Plastiques - Acétate de cellulose - Détermination de la perte de viscosité au moulage.
NF T51-352*NF EN ISO 1061:1999 Plastics. Unplasticized cellulose acetate. Determination of free acidity.
NF EN ISO 1061:1999 Plastiques - Acétate de cellulose non plastifié - Détermination de l'acidité libre.
NF EN ISO 585:1999 Plastiques - Acétate de cellulose non plastifié - Détermination de l'humidité.
NF T50-004:1988 PLASTICS. ETHYLENE/VINYL ACETATE COPOLYMER THERMOPLASTICS (E/VAC). PART 1 : DESIGNATION.
NF EN ISO 1598:1999 Plastiques - Acétate de cellulose - Détermination des particules insolubles
NF T50-004-2:1995 Plastics. Ethylene/vinyl acetate (E/vac) moulding and extrusion materials. Part 2 : preparation of test specimens and determination of properties.
NF T50-004-1*NF EN ISO 21301-1:2019 Plastics - Ethylene/vinyl acetate (EVAC) moulding and extrusion materials - Part 1 : designation system and basis for specifications
NF EN ISO 21301-1:2019 Plastiques - Matériaux à base de copolymères éthylène/acétate de vinyle (EVAC) pour moulage et extrusion - Partie 1 : système de désignation et base de spécification
NF EN ISO 21301-2:2019 Plastiques - Matériaux à base de copolymère éthylène/acétate de vinyle (EVAC) pour moulage et extrusion - Partie 2 : préparation des éprouvettes et détermination des propriétés
NF T51-250:1976 Plastics. Aqueous dispersions of homo and copolymers of vinyl acetate. Determination of bromine number.
NF T50-004-1:1999 Plastics. Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials. Part 1 : designation and specification.
NF EN ISO 1600:1999 Plastiques - Acétate de cellulose - Détermination de l'absorption de lumière sur éprouvettes moulées produites en utilisant différentes périodes de chauffage.
NF T51-358*NF EN ISO 1600:1999 Plastics. Cellulose acetate. Determination of light absorption on moulded specimens produced using different periods of heating.
NF T51-294-4*NF EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4 : determination of moulding shrinkage
NF EN ISO 294-4:2019 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 4 : détermination du retrait au moulage
NF T51-294-3*NF EN ISO 294-3:2020 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3 : small plates
NF T52-115:1985 Plastics. Basic materials for polyurethanes. Polyethers and polyesters. Determination of water.
NF T51-294-2*NF EN ISO 294-2:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars
NF X41-513:1961 Protection of plastics. Part 1. Testing method for resistance of ingredients to microorganisms.
NF EN ISO 21305-1:2019 Plastiques - Matériaux à base de polycarbonate (PC) pour moulage et extrusion - Partie 1 : système de désignation et base de spécifications
NF EN ISO 294-3:2020 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 3 : plaques de petites dimensions
NF EN ISO 294-2:2018 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 2 : Barreaux de traction de petites dimensions
NF T51-294-1*NF EN ISO 294-1:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1 : general principles, and moulding of multipurpose and bar test specimens

SAE - SAE International, Composition of acetate plastic

SAE AMS3622B-1984 Plastic Moldings and Extrusions@ Cellulose Acetate General Purpose )
SAE AMS3622D-1996 Plastic Moldings and Extrusions@ Cellulose Acetate General Purpose

RU-GOST R, Composition of acetate plastic

GOST R ISO 1159-1993 Plastics. Vinylchloride-vinylacetate copolymers. Determination of vinylacetate
GOST 33812-2016 Ammonium nitrate fertilizers. Determination of the combustible ingredients
GOST R 51822-2001 Wines and wine materials. Gas-chromatographic method for determination of volume fraction of ethanol and mass concentration of acetic and propionic acids

ES-AENOR, Composition of acetate plastic

SE-SIS, Composition of acetate plastic

SIS SS-ISO 1159:1987 Plastics - Vinyl chloride-vinyl acetate copolymers - Determination of vinyl acetate
SIS SS 16 11 56-1984 Plastics — Amorphous thermoplastic moulding materials — Preparation of test specimens with a defined level of shrinkage — Part 1: Test specimens in the form of parallelepipedic bars (Injec- tion moulding and compression moulding)

IT-UNI, Composition of acetate plastic

UY-UNIT, Composition of acetate plastic

AENOR, Composition of acetate plastic

UNE-EN ISO 8985:1998 PLASTICS. ETHYLENE/VINYL ACETATE COPOLYMER (EVAC) THERMOPLASTICS. DETERMINATION OF VINYL ACETATE CONTENT. (ISO 8985:1998).
UNE-EN ISO 1599:2000 PLASTICS - CELLULOSE ACETATE - DETERMINATION OF VISCOSITY LOSS ON MOULDING (ISO 1599:1990)
UNE-EN ISO 1061:2000 PLASTICS - UNPLASTICIZED CELLULOSE ACETATE - DETERMINATION OF FREE ACIDITY (ISO 1061:1990)
UNE-EN ISO 585:2000 PLASTICS - UNPLASTICIZED CELLULOSE ACETATE - DETERMINATION OF MOISTURE CONTENT (ISO 585:1990)
UNE-EN ISO 1598:2000 PLASTICS. CELLULOSE ACETATE. DETERMINATION OF INSOLUBLE PARTICLES (ISO 1598:1990)
UNE-EN ISO 4613-1:2000 PLASTICS - ETHYLENE/VINYL ACETATE (E/VAC) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION AND SPECIFICATION (ISO 4613-1:1993)
UNE-EN ISO 4613-2:1996 PLASTICS. ETHYLENE/VINYL ACETATE (E/VAC) MOULDING AND EXTRUSION MATERIals. Part 2: Preparation of test specimens and determination of properties. (ISO 4613-2:1995).
UNE-EN 13189:2001 ACETIC ACID FOOD GRADE. PRODUCT MADE FROM MATERIALS OF NON-AGRICULTURAL ORIGIN. DEFINITIONS, REQUIREMENTS, MARKING.
UNE-EN ISO 4613-2/A1:2004 Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties - Amendment 1 (ISO 4613-2:1995/Amd 1:2004)
UNE-EN ISO 1600:2000 PLASTICS - CELLULOSE ACETATE - DETERMINATION OF LIGHT ABSORPTION ON MOULDED SPECIMENS PRODUCED USING DIFFERENT PERIODS OF HEATING (ISO 1600:1990)
UNE-EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2001)
UNE-EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002)
UNE-EN ISO 7391-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006)

Korean Agency for Technology and Standards (KATS), Composition of acetate plastic

KS M ISO 3451-3-2008(2018) Plastics－Determination of ash－Part 3：Unplasticized cellulose acetate
KS M ISO 3451-3:2008 Plastics－Determination of ash－Part 3：Unplasticized cellulose acetate
KS M ISO 4613-1-2016(2021) Plastics - Ethylene/vinyl acetate(E/VAC) moulding and extrusion materials - Part 1 : Designation and specification
KS M ISO 4613-2:2011 Plastics-Ethylene/vinyl acetate(E/VAC) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 4613-2-2016(2021) Plastics－Ethylene/vinyl acetate(E/VAC) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 4613-2:2016 Plastics－Ethylene/vinyl acetate(E/VAC) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 4613-1:2006 Plastics - Ethylene/vinyl acetate(E/VAC) moulding and extrusion materials - Part 1 : Designation and specification
KS M ISO 4613-1:2016 Plastics - Ethylene/vinyl acetate(E/VAC) moulding and extrusion materials - Part 1 : Designation and specification
KS M ISO 7510:2019 Plastics piping systems — Glass-reinforced plastics(GRP) components — Determination of the amounts of constituents
KS P ISO 8362-7:2020 Injection containers and accessories — Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part
KS M ISO 2114:2010 Plastics(polyester resins) and paints and varnishes(binders)－Determination of partial acid value and total acid value
KS M ISO 10724-1-2010(2020) Plastics－Injection moulding of test specimens of thermosetting powder moulding compounds(PMCs)－Part 1：General principles and moulding of multipurpose test specimens
KS M ISO 1874-1:2013 PLASTICS — POLYAMIDE(PA) MOULDING AND EXTRUSION MATERIALS — PART 1: DESIGNATION
KS M ISO 1874-1:2008 Plastics-Polyamide(PA) moulding and extrusion materials-Part 1:Designation system and basis for specifications

Lithuanian Standards Office , Composition of acetate plastic

LST EN ISO 1599:2000 Plastics - Cellulose acetate - Determination of viscosity loss on moulding (ISO 1599:1990)
LST EN ISO 1061:2000 Plastics - Unplasticized cellulose acetate - Determination of free acidity (ISO 1061:1990)
LST EN ISO 585:2000 Plastics - Unplasticized cellulose acetate - Determination of moisture content (ISO 585:1990)
LST EN ISO 4613-1:2001 Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 1: Designation and specification (ISO 4613-1:1993)
LST EN ISO 1598:2000 Plastics - Cellulose acetate - Determination of insoluble particles (ISO 1598:1990)
LST EN ISO 4613-2:2001 Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4613-2:1995)
LST EN ISO 1600:2000 Plastics - Cellulose acetate - Determination of light absorption on moulded specimens produced using different periods of heating (ISO 1600:1990)
LST EN ISO 4613-2:2001/A1:2004 Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties - Amendment 1 (ISO 4613-2:1995/Amd 1:2004)
LST EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2001)
LST EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002)
LST EN ISO 7391-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006)
LST EN 637+AC-2002 Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method

TR-TSE, Composition of acetate plastic

TS 1854-1975 PLASTICS DETERMINATION OF ETHYL ETHER SOLUBLE MATTER ?N PLASTICIZED CELLULOSE ACETATE
TS 1117-1972 PLASTICS DETERMINATION OF VINYL AOETATE ?N VINYL CHLORIDE - VINYL ACETATE COPOLYMERS
TS 1973-1975 P L A S T I C S DETERMINATION OF LIGHT ABSORPTION OF CELLULOSE ACETATE BEFORE AND AFTER HEATING
TS 3239-1978 PLASTiCS - AQUEOUS DISPERSIONS OF HOMOPOLYMERS AND COPOLYMERS OF VINYL ACETATE - DETERMINATION OF BROMINE NUMBER
TS 1803-1975 — PLASTICS — PVC BESINS DETERMINATION OF ASH AND SULPHATED ASH

FI-SFS, Composition of acetate plastic

SFS-ISO 585 E:1986 This standard is approved in English
SFS-ISO 1875 E:1986 This standard is approved in English

RO-ASRO, Composition of acetate plastic

STAS 9685-1974 PLASTIGS Determination of vinyl acetalc content in vinyl chloride - vinyl acetate copolymers
STAS 7359-1989 Varnishes and paints PAINTS BASED ON POLYVI- NYLACETATE AQUEOUSDIS- PERT1DNS
SR EN 637-1996 Plastics piping systems - Glass-reinforced plastics components-Determination of the amounts of constituents using the gravimetric method

United States Navy, Composition of acetate plastic

NAVY MIL-P-21094 B-1968 PLASTIC SHEET, CELLULOSE ACETATE, OPTICAL QUALITY
NAVY MIL-P-81390 NOTICE 2-1996 PLASTIC, MOLDING MATERIAL, POLYCARBONATE, GLASS FIBER REINFORCED
NAVY MIL-P-81390 VALID NOTICE 1-1991 PLASTIC, MOLDING MATERIAL, POLYCARBONATE, GLASS FIBER REINFORCED
NAVY MIL-P-81390-1966 PLASTIC, MOLDING MATERIAL, POLYCARBONATE, GLASS FIBER REINFORCED

PL-PKN, Composition of acetate plastic

PN C89420-1991 Plastics. Aqueous dispersions of homopolymers and copolymers of vinyl acetate. Determination of bromine number
PN-EN ISO 294-3-2021-01 E Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)

KR-KS, Composition of acetate plastic

KS M ISO 4613-2-2016 Plastics－Ethylene/vinyl acetate(E/VAC) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 7510-2019 Plastics piping systems — Glass-reinforced plastics(GRP) components — Determination of the amounts of constituents
KS M ISO 4613-1-2016 Plastics - Ethylene/vinyl acetate(E/VAC) moulding and extrusion materials - Part 1 : Designation and specification
KS P ISO 8362-7-2020 Injection containers and accessories — Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part

U.S. Military Regulations and Norms, Composition of acetate plastic

ARMY L-P-380 C VALID NOTICE 1-1989 PLASTIC MOLDING MATERIAL METHACRYLATE
ARMY L-P-380 C-1973 PLASTIC MOLDING MATERIAL METHACRYLATE

CEN - European Committee for Standardization, Composition of acetate plastic

EN ISO 21301-1:2019 Plastics - Ethylene-vinyl acetate (EVAC) moulding and extrusion materials - Part 1: Designation system and basis for specifications
EN ISO 21301-2:2019 Plastics - Ethylene-vinyl acetate (EVAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
EN ISO 21305-2:2019 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
EN ISO 21305-1:2019 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications

IN-BIS, Composition of acetate plastic

IS 12150-1987

Group Standards of the People's Republic of China, Composition of acetate plastic

T/CSRA 21-2022 Plastic composition test Polyethylene (PE), polypropylene (PP), polystyrene (PS), polyvinyl chloride (PVC), ethylene-vinyl acetate copolymer (EVA), polyethylene terephthalate in plastic products Esters (PET) Qualitative Analysis Method

CH-SNV, Composition of acetate plastic

VSM 15160-1971 Rectangular or square parallel keys and their corresponding keyways (Dimensions in millimetres)
SNV 24501-1937
SN EN ISO 294-3:2020 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)

American Society for Testing and Materials (ASTM), Composition of acetate plastic

ASTM D707-15(2023) Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB)
ASTM D707-09 Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds
ASTM D706-15 Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA)
ASTM D706-20 Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA)
ASTM D706-09 Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds
ASTM D4084-07 Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)
ASTM D4084-94(1999) Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)
ASTM D4084-82(1988) Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)
ASTM D4084-07(2012) Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)
ASTM D4084-07(2017) Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)

Professional Standard - Tobacco, Composition of acetate plastic

YC/T 235.5-2007 General tolerances- Part 5: Plastic piece made from plastic semi-manufactured goods

PT-IPQ, Composition of acetate plastic

E 158-1964
E 157-1964
NP 2277-1988 Alcoholic beverages and spirits Determination of sorbic acid content
NP 2274-1988 Alcoholic beverages and spirits Detection of sorbic, benzoic, p-chlorobenzoic, salicylic, hydroxybenzoic acids and esters of p-hydroxybenzoic
NP 2227-1988 Alcoholic beverages and spirits Determination of sulphates content

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Composition of acetate plastic

GB/T 2895-2008 Plastics.Polyester resin.Determination of partial acid value and total acid value
GB/T 12008.5-2010 Plastics.Polyether polyols.Part 5:Determination of acidity as acid number

国家市场监督管理总局、中国国家标准化管理委员会, Composition of acetate plastic

GB/T 41003.1-2021 General technical specification for plastic foam mats—Part 1:Polyethylene/ethylene vinylacetate copolymer foam mats for children

Association of German Mechanical Engineers, Composition of acetate plastic

VDI 3822 Blatt 2.1.1-2012 Failure analysis - Defects of thermoplastic products made of plastics caused by faulty design
VDI 3822 Blatt 2.1.8-2012 Failure analysis - Defects of thermoplastic products made of plastics caused by weather-induced stress
VDI 3822 Blatt 2.1.3-2012 Failure analysis - Defects of thermoplastic products made of plastics caused by an unfavourable choice of material and by defects in the material

AT-ON, Composition of acetate plastic

OENORM EN ISO 294-3:2020 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)

Canadian General Standards Board （CGSB), Composition of acetate plastic

CGSB 1-GP-71 METH 57.1-1980 Methodes D'Essai Des Peintures Et Pigments Teneur En Anhydride Phtalique
CGSB 1-GP-71 METH 60.2-1974 Methods of Testing Paints and Pigments Total Rosin Acids Content of Coating Vehicles