ZH
RU
ES
chemical composition of plastic
chemical composition of plastic, Total:497 items.
In the international standard classification, chemical composition of plastic involves: Products of the chemical industry, Rubber and plastics products, Analytical chemistry, Welding, brazing and soldering, Plastics, Vocabularies, Ceramics, Road vehicle systems, Ferrous metals, Glass, Pipeline components and pipelines, Photography, Tobacco, tobacco products and related equipment, Paints and varnishes, Protective equipment, Testing of metals, Magnetic materials, Components for electrical equipment, Cutting tools, METALLURGY, Fuels, Company organization and management, Non-ferrous metals, Products of non-ferrous metals, Construction materials, Reinforced plastics, Products of the textile industry, Fluid storage devices, Refractories, Adhesives, Electronic components in general, Internal combustion engines for road vehicles, Agricultural machines, implements and equipment, Industrial furnaces, Energy and heat transfer engineering in general, Medical equipment, Materials for aerospace construction, Iron and steel products, Leather technology, Metalliferous minerals.
CH-SNV, chemical composition of plastic
U.S. Environmental Protection Agency (U.S. EPA), chemical composition of plastic
US-FCR, chemical composition of plastic
Taiwan Provincial Standard of the People's Republic of China, chemical composition of plastic
- CNS 11656-1986 Glassfiber Reinforced Plastic Chemical-Resistant Tank
- CNS 11657-1986 Method of Test for Glassfiber Reinforced Plastic Chemical-Resistant Tank
PT-IPQ, chemical composition of plastic
RO-ASRO, chemical composition of plastic
- STAS 10972-1977 PLASTIC CANISTRES FOR CHEMICAL PRODUCTS
- STAS 3361/2-1987 FCEL NATURAL CASES FuEL value calculus on chemical composition basis
- STAS SR EN 29453-1995 Soft solder alloys. Chemical compositions and forms
- STAS 12501-1986 PLASTICS Behaviour determination at moulding machining of plasticized polyvinyl chloride granules
- STAS 9976-1974 Plastics PBEPABATION OF SPECIMENS FOR OPTICAL TESTS Moulding method
- STAS SR EN 573-3-1995 Aluminium and aluminium alloys. Chemical composition and form of wrought products. Part 3: Chemical composition
- STAS 8317-1969
- STAS 2015/1-1983 CAST IRON AND STEELS Sampling for tlie determination of chemical composition
- SR EN 637-1996 Plastics piping systems - Glass-reinforced plastics components-Determination of the amounts of constituents using the gravimetric method
GM North America, chemical composition of plastic
PL-PKN, chemical composition of plastic
AENOR, chemical composition of plastic
- UNE 53316:2012 Plastics. Determination of chemical resistance of glass reinforced plastics.
- UNE 36077:1973 SEMIPRODUCTS DEFINED BY CHEMICAL COMPOSITION
- UNE 61001:1975 REFRACTORY MATERIALS. DEFINITION AND CLASSIFICATION BY ITS CHEMICAL COMPOSITION
- UNE-EN ISO 9453:2015 Soft solder alloys - Chemical compositions and forms (ISO 9453:2014)
- UNE 53389:2001 IN Plastics pipes and fittings. Combined chemical-resistance classification table.
- UNE-EN 573-3:2014 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
- UNE-EN 1842:1998 PLASTICS. THERMOSET MOULDING COMPOUNDS (SMC - BMC). DETERMINATION OF COMPRESSION MOULDING SHRINKAGE
- UNE-EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2001)
- UNE-EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002)
- UNE-EN 12698-1:2007 Chemical analysis of nitride bonded silicon carbide refractories - Part 1: Chemical methods
- UNE-EN 12814-8:2002 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements.
- UNE-EN 637:1996 PLASTICS PIPING SYSTEMS. GLASS-REINFORCED PLASTICS COMPONENTS. DETERMINATION OF THE AMOUNTS OF CONSTITUENTS USING THE GRAVIMETRIC METHOD.
(U.S.) Plastic Pipe Association, chemical composition of plastic
TR-TSE, chemical composition of plastic
- TS 710-1969 PLASTICS DETERMINATION OF THE RESISTANCE OF PLASTICS TO CHEMICAL SUBSTANCES
- TS 2249-1976 PLASTICS r DETERMINATION OF MELTING TEMPERATURE OF SEMI - CRYSTALLINE POLYMERS , OPTICAL METHOD
Japanese Industrial Standards Committee (JISC), chemical composition of plastic
- JIS Z 3282:1999 Soft solders -- Chemical compositions and forms
- JIS Z 3282:2006 Soft solders -- Chemical compositions and forms
- JIS Z 3282:2017 Soft solders -- Chemical compositions and forms
- JIS K 7114:2001 Plastics -- Methods of test for the determination of the effects of immersion in liquid chemicals
- JIS K 7034:1998 Plastics piping systems -- Pipes made of glass-reinforced thermosetting plastics (GRP) -- Determination of the resistance to chemical attack for the inside of a section in a deflected condition
- JIS R 7223:1997 Chemical analysis of graphite materials
- JIS R 6124:1998 Method for chemical analysis of silicon carbide abrasives
- JIS K 7070:1999 Testing method for chemical resistance of fiber reinforced plastics
- JIS H 1403:1987 Methods for chemical analysis of tungsten materials
- JIS H 1404:1987 Methods for chemical analysis of molybdenum materials
- JIS H 1403:2001 Methods for chemical analysis of tungsten materials
- JIS H 1404:2001 Methods for chemical analysis of molybdenum materials
- JIS R 6124:1987 Method for chemical analysis of silicon carbide abrasives
- JIS K 7070:1992 Testing method for chemical resistance of fiber reinforced plastics
- JIS K 7154-1:2002 Plastics -- Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) -- Part 1: General principles and moulding of multipurpose test specimens
- JIS R 6123:1995 Method for chemical analysis of aluminous abrasives
- JIS R 6123:1998 Method for chemical analysis of alumina abrasives
Professional Standard - Electron, chemical composition of plastic
- SJ/T 11392-2009 Lead-free solders-Chemical compositions and forms
- SJ/T 1505-1997 Chemical analysis methods for products and semifinished products made of gyromagnetic ferrite materials
- SJ/Z 1466-1979 Method of chemical analysis of raw materials for use in chemical engineering
- SJ/Z 1464-1979 Method of chemical analysis of ore materials
- SJ/Z 1465-1979 Method of chemical analysis of ceramic blank
工业和信息化部, chemical composition of plastic
German Institute for Standardization, chemical composition of plastic
- DIN 53748:1970 Chemical Analysis of Phenol-formaldehyde Resins; Phenoplastic Moulding Materials and Moulded Materials
- DIN EN ISO 9453:2006 Soft solder alloys - Chemical compositions and forms (ISO 9453:2006); English version of DIN EN ISO 9453:2006-12
- DIN EN ISO 9453:2021-01 Soft solder alloys - Chemical compositions and forms (ISO 9453:2020); German version EN ISO 9453:2020
- DIN 51076-1:1991 Testing of ceramic materials; chemical analysis of silicon carbide as main or minor constituent of ceramic materials; determination of SiC in materials with oxidic components and binding materials
- DIN 1707-100:2011 Soft solder alloys - Chemical composition and forms
- DIN 16889-1:1989 Determination of the chemical resistance factor for thermoplastics pipes; polyolefin pipes
- DIN 16888-1:1989 Determination of chemical resistance of thermoplastics pipes; polyolefin pipes
- DIN 53749:1970 Chemical Analysis of Urea-, Thiourea- and Melamine-formaldehyde Resins and Aminoplastic Moulding Materials in the Moulded and Unmoulded State
- DIN EN ISO 294-4:2019-04 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2018); German version EN ISO 294-4:2019
- DIN EN 12575:1998 Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC; German version EN 12575:1998
- DIN 53736:1973 Testing of plastics; determination of the melt temperature of semicristalline plastics
- DIN 16888-2:1991 Determination of chemical resistance of thermoplastics pipes; unplasticized polyvinyl chloride (PVC-U) pipes
- DIN 51079-2:2004 Testing of ceramic materials - Chemical analysis of silicon carbide used as raw material and as constituent in materials - Part 2: Pressure decomposition with acid
- DIN 51729-8:2001 Solid fuels - Determination of chemical composition of fuel ash - Part 8: Determination of soda and potash (Na<(Index)2>O, K<(Index)2>O) contents
- DIN 51729-10:2011-04 Testing of solid fuels - Determination of chemical composition of fuel ash - Part 10: X-Ray Fluorescence Analysis
- DIN EN 573-3:2007 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products; German version EN 573-3:2007
- DIN EN 573-3/A1:2021 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products; German and English version EN 573-3:2019/prA1:2021
- DIN EN 573-3:2019 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
- DIN EN 573-3:2022-09 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products; German version EN 573-3:2019+A1:2022
- DIN EN 573-3/A2:2023-05 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products; German and English version EN 573-3:2019+A1:2022/prA2:2023 / Note: Date of issue 2023-04-14*Intended as an amendment...
- DIN 51079-1:2004 Testing of ceramic materials - Chemical analysis of silicon carbide used as raw material and as constituent in materials - Part 1: Decomposition with sodium carbonate and boric acid
- DIN EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2018)
- DIN 51729-10:2011 Testing of solid fuels - Determination of chemical composition of fuel ash - Part 10: X-Ray Fluorescence Analysis
- DIN EN ISO 294-3:2020-11 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020); German version EN ISO 294-3:2020
- DIN 17742:2020 Wrought nickel alloys with chromium - Chemical composition
- DIN 86128-3:2021 Pipe couplings – Part 3: Pipe couplings intended for connecting pipes and fittings made of plastic-plastic/plastic-metal
- DIN EN ISO 294-4:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO/FDIS 294-4:2018); German and English version prEN ISO 294-4:2018
- DIN EN ISO 13693-1:2017-07 Irrigation equipment - Safety devices for chemigation - Part 1: Small plastics valves for chemigation (ISO 13693-1:2013); German version EN ISO 13693-1:2017
- DIN 16922:1981 Flexible sheet materials manufactured using plastics; technological classification
- DIN 86128-3:2021-04 Pipe couplings Part 3: Pipe couplings intended for connecting pipes and fittings made of plastic-plastic/plastic-metal
- DIN EN ISO 21068-3:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents (ISO 21068-3:2008); English version of DIN EN ISO 21068-3:2008-12
- DIN ISO 9286:1998 Abrasive grains and crude - Chemical analysis of silicon carbide (ISO 9286:1997)
- DIN EN ISO 294-2:2019-03 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018); German version EN ISO 294-2:2018
- DIN EN ISO 175:2011-03 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010); German version EN ISO 175:2010
- DIN 53380-5:2014-12 Testing of plastics - Determination of gas transmission rate - Part 5: Optical method for plastic films and moulded plastic parts
- DIN 16463:2020 Determination of influence of chemical fluids on the long-term hydrostatic strength of pressure pipes made of thermoplastics materials
- DIN 53380-5:2014 Testing of plastics - Determination of gas transmission rate - Part 5: Optical method for plastic films and moulded plastic parts
- DIN EN 12698-1:2007 Chemical analysis of nitride bonded silicon carbide refractories - Part 1: Chemical methods English version of DIN EN 12698-1:2007-06
- DIN 53477:2018-09 Testing of plastics - Determination of particle size distribution of moulding materials by dry sieving analysis
- DIN EN 637:1994-08 Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method; German version EN 637:1994
- DIN 17744:2020 Wrought nickel alloys with molybdenum and chromium - Chemical composition
- DIN 17744:2002 Wrought nickel alloys with molybdenum and chromium - Chemical composition
- DIN 17744:2020-12 Wrought nickel alloys with molybdenum and chromium - Chemical composition
- DIN 1707-100:2017 Soft solder alloys - Chemical composition and forms additional to DIN EN ISO 9453:2014-12
- DIN EN 12814-8:2023-08 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements; German and English version prEN 12814-8:2023 / Note: Date of issue 2023-06-30*Intended as replacement for DIN EN 12814-8 (2021-03).
- DIN EN 12814-8:2021-03 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements; German version EN 12814-8:2021
- DIN EN 12698-1:2007-06 Chemical analysis of nitride bonded silicon carbide refractories - Part 1: Chemical methods; German version EN 12698-1:2007
- DIN 1707-100:2017-10 Soft solder alloys - Chemical composition and forms additional to DIN EN ISO 9453:2014-12
- DIN EN ISO 294-2:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018)
- DIN ISO 9285:1998 Abrasive grains and crude - Chemical analysis of fused aluminium oxide (ISO 9285:1997)
- DIN 53393:1976 Testing of Textile Glass-reinforced Plastics; Behaviour to the Effect of Chemicals
- DIN EN 573-3:2013 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products; German version EN 573-3:2013
- DIN EN 573-3:2022 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products (includes Amendment A1:2022)
YU-JUS, chemical composition of plastic
- JUS C.C1.100-1990 Pr±mary alumlnitim. Chemical composltion
- JUS G.S3.506-1987 Plastics. Resistance termoplastic pipes to chemical fluids. Immersion test method. System for preliminary classification
- JUS C.C1.103-1983 Aluminium master alloys. Chemical composition and requirements for delivery
- JUS C.D2.100-1990 ffrough copper and copper allays. Chemical compositions forms of semimamifactured and applicatitm dlrectlcme
International Organization for Standardization (ISO), chemical composition of plastic
- ISO 16869:2008 Plastics - Assessment of the effectiveness of fungistatic compounds in plastics formulations
- ISO 9453:2006 Soft solder alloys - Chemical compositions and forms
- ISO 9453:1990 Soft solder alloys; chemical compositions and forms
- ISO 9453:2014 Soft solder alloys - Chemical compositions and forms
- ISO 175:1999 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals
- ISO 18915:2000 Imaging materials - Methods for the evaluation of the effectiveness of chemical conversion of silver images against oxidation
- ISO/CD TR 22785-5:2023 Coatings on plastics and composites — Part 5: Chemical resistance
- ISO 294-3:2020 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 3: Small plates
- ISO 24023-2:2020 Plastics — Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
- ISO/R 209:1971 Composition of wrought products of aluminium and aluminium alloys — Chemical composition (per cent)
- ISO/TR 10358:1993 Plastics pipes and fittings; combined chemical-resistance classification table
- ISO/TR 10358:2021 Plastics pipes and fittings for industrial applications - Collection of data on combined chemical-resistance
- ISO 24023-1:2020 Plastics — Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials — Part 1: Designation system and basis for specifications
- ISO 16869:2001 Plastics - Assessment of the effectiveness of fungistatic compounds in plastics formulations
- ISO 13693-1:2013 Irrigation equipment - Safety devices for chemigation - Part 1: Small plastics valves for chemigation
- ISO 9286:1997 Abrasive grains and crude - Chemical analysis of silicon carbide
- ISO 294-2:2018 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 2: Small tensile bars
- ISO 21068-3:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents
- ISO 10384:2008 Hot-rolled carbon steel sheet as defined by chemical composition
- ISO 17489:2013 Leather.Chemical tests.Determination of tan content in synthetic tanning agents
- ISO 175:2010 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals
- ISO 6185:1982 Shipbuilding and marine structures; Inflatable boats; Boats made of reinforced elastomers or plastomers
- ISO 9285:1997 Abrasive grains and crude - Chemical analysis of fused aluminium oxide
RU-GOST R, chemical composition of plastic
- GOST 12020-1972 Plastics. Testing methods of plastics resistance to chemical substances
- GOST 24888-1981 Plastics, polymers and synthetic resins. Chemical names, terms and definitions
- GOST 32362-2013 Inorganic glass and glass-crystalline materials. Determination of chemical composition. General requirements for methods of determining the content of major chemical components
- GOST 28654-1990 Abrasive grains from aluminium oxide. Test methods of chemical composition
- GOST R 59592-2021 Solid mineral fuel. Methods for determination of chemical composition of ash
- GOST 27078-1986 Thermoplastic pipes. Methods of determination of the tubes length after heating
- GOST 10538-1987 Solid fuel. Methods for determination of chemical composition of ash
- GOST 33351-2015 Polymer composites. Production of samples for testing by injection moulding of long-fibre moulding compounds
- GOST 7122-1981 Weld seams and all-weld metal. Methods of sample selection for determination of chemical composition
- GOST R 55879-2013 Solid mineral fuels. Determination of chemical composition of ash by X-Ray fluorescence
British Standards Institution (BSI), chemical composition of plastic
- BS EN ISO 9453:2014 Soft solder alloys. Chemical compositions and forms
- BS EN ISO 9453:2006 Soft solder alloys - Chemical compositions and forms
- BS EN ISO 9453:2020 Soft solder alloys. Chemical compositions and forms
- BS ISO 4433-2:1998 Thermoplastics pipes - Resistance to liquid chemicals - Classification - Polyolefin pipes
- BS 2782-4 Method 470C:1991 Methods of testing plastics. Chemical properties. Determination of ash of unplasticized cellulose acetate
- BS EN 573-3:2007 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Chemical composition and form of products
- BS EN 573-3:2013 Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products
- BS ISO 4433-2:1997 Thermoplastics pipes. Resistance to liquid chemicals. Classification. Polyolefin pipes
- BS EN 1744-1:2009 Tests for chemical properties of aggregates - Chemical analysis
- BS EN 1744-1:2009+A1:2012 Tests for chemical properties of aggregates. Chemical analysis
- BS EN 1744-1:1998 Tests for chemical properties of aggregates - Chemical analysis
- BS EN 1744-1:2010 Tests for chemical properties of aggregates. Chemical analysis
- BS EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Determination of moulding shrinkage
- BS EN 16643:2016 Rubber and plastics hoses and hose assemblies. Non-bonded fluoroplastic lined (e.g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals. Specification
- BS ISO 16869:2008 Plastics - Assessment of the effectiveness of fungistatic compounds in plastics formulations
- BS EN 573-3:2009 Aluminium and
aluminium alloys —
Chemical composition
and form of wrought
products
Part 3: Chemical composition and form
of products
- 19/30398273 DC BS EN ISO 9453. Soft solder alloys. Chemical compositions and forms
- BS EN ISO 21068-3:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products -Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents
- BS ISO 7510:2017 Plastics piping systems. Glass-reinforced plastics (GRP) components. Determination of the amounts of constituents
- BS ISO 18915:2001 Imaging materials - Methods for the evaluation of the effectiveness of chemical conversion of silver images against oxidation
- BS ISO 18915:2000 Imaging materials. Methods for the evaluation of the effectiveness of chemical conversion of silver images against oxidation
- BS ISO 4433-4:1998 Thermoplastics pipes - Resistance to liquid chemicals - Classification - Poly(vinylidene fluoride) (PVDF) pipes
- BS ISO 4433-1:1998 Thermoplastic pipes - Resistance to liquid chemicals - Classification - Immersion test method
- BS ISO 4433-4:1997 Thermoplastics pipes. Resistance to liquid chemicals. Classification. Poly(vinylidene fluoride) (PVDF) pipes
- BS ISO 9286:1997 Abrasive grains and crude - Chemical analysis of silicon carbide
- BS ISO 9285:1997 Abrasive grains and crude - Chemical analysis of fused aluminium oxide
- BS 4618 Sec.4.6:1974 Recommendations for the presentation of plastics design data. Environmental and chemical effects. The thermal endurance of plastics
- BS EN 637:1995 Plastics piping systems. Glass-reinforced plastics components. Determination of the amounts of constituents using the gravimetric method
- BS EN ISO 17489:2013 Leather. Chemical tests. Determination of tan content in synthetic tanning agents
- 23/30470932 DC BS EN 573-3 AMD 2. Aluminium and aluminium alloys. Chemical composition and form of wrought products - Part 3. Chemical composition and form of products
- 21/30429708 DC BS EN 573-3 AMD1. Aluminium and aluminium alloys. Chemical composition and form of wrought products. Part 3. Chemical composition and form of products
- BS ISO 11359-3:2002 Plastics - Thermomechanical analysis (TMA) - Determination of penetration temperature
- BS ISO 10724-1:1998 Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs). General principles and moulding of multipurpose test specimens
Association Francaise de Normalisation, chemical composition of plastic
- NF A81-363:2007 Soft solder alloys - Chemical compositions and forms.
- NF A81-363:2014 Soft solder alloys - Chemical compositions and forms
- NF A81-363:1994 Soft solder alloys. Chemical compositions and forms.
- NF T51-294-4*NF EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4 : determination of moulding shrinkage
- NF EN ISO 294-4:2019 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 4 : détermination du retrait au moulage
- NF T51-029*NF EN ISO 175:2011 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals
- NF A02-120-3:2013 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: chemical composition and form of products
- NF A02-122:1994 ALUMINIUM AND ALUMINIUM ALLOYS. CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS. PART 3 : CHEMICAL COMPOSITION. (EUROPEAN STANDARD EN 573-3).
- NF T51-294-3*NF EN ISO 294-3:2020 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3 : small plates
- NF T29-003:1968 Produits chimiques destinés à la photographie - Bromure de potassium.
- NF U51-480-1*NF EN ISO 13693-1:2017 Irrigation equipment - Safety devices for chemigation - Part 1 : small plastics valves for chemigation
- NF EN ISO 294-5:2017 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 5 : préparation d'éprouvettes normalisées pour déterminer l'anisotropie
- NF T51-294-2*NF EN ISO 294-2:2018 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars
- NF X41-513:1961 Protection of plastics. Part 1. Testing method for resistance of ingredients to microorganisms.
- NF T51-029:1982 PLASTICS. DETERMINATION OF RESISTANCE TO LIQUID CHEMICAL SUBSTANCES,INCLUDING WATER.
- NF EN ISO 294-3:2020 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 3 : plaques de petites dimensions
- NF EN ISO 294-2:2018 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 2 : Barreaux de traction de petites dimensions
- NF B49-423-3*NF EN ISO 21068-3:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 3 : determination of nitrogen, oxygen and metallic and oxidic constituents.
- NF EN ISO 13693-1:2017 Matériel d'irrigation - Dispositifs de sécurité pour l'application de produits chimiques par irrigation - Partie 1 : petites vannes en matière plastique pour l'application de produits chimiques par irrigation
- NF B49-422-1*NF EN 12698-1:2008 Chemical analysis of nitride bonded silicon carbide refractories - Part 1 : chemical methods.
- NF EN 1744-1/IN1:2014 Essais visant à déterminer les propriétés chimiques des granulats - Partie 1 : analyse chimique
- NF EN 1744-1+A1:2014 Essais visant à déterminer les propriétés chimiques des granulats - Partie 1 : analyse chimique
- NF EN ISO 21068-3:2008 Analyse chimique des matières premières et des produits réfractaires contenant du carbure de silicium - Partie 3 : dosage de l'azote, de l'oxygène et des constituants métalliques et oxydés
- NF T51-294-1*NF EN ISO 294-1:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1 : general principles, and moulding of multipurpose and bar test specimens
- NF A89-810-8:2002 Testing of welded joints of thermoplastics semi-finished products - Part 8 : requirements.
- NF A89-810-8:2021 Testing of welded joints of thermoplastics semi-finished products - Part 8 : requirements
- NF EN ISO 294-1:2017 Plastiques - Moulage par injection des éprouvettes de matériaux thermoplastiques - Partie 1 : principes généraux, et moulage des éprouvettes à usages multiples et des barreaux
- NF T51-600-3*NF EN ISO 14526-3:2000 Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 3 : requirements for selected moulding compounds
- NF T51-034-5:2009 Plastics - Determination of tensile properties - Part 5 : test conditions for unidirectional fibre-reinforced plastic composites.
- NF EN ISO 175:2011 Plastiques - Méthodes d'essai pour la détermination des effets de l'immersion dans des produits chimiques liquides
European Committee for Standardization (CEN), chemical composition of plastic
- EN ISO 9453:2020 Soft solder alloys - Chemical compositions and forms (ISO 9453:2020)
- EN ISO 9453:2014 Soft solder alloys - Chemical compositions and forms
- EN 29453:1993 Soft Solder Alloys - Chemical Compositions and Forms (ISO 9453 : 1990)
- EN ISO 24023-2:2020 Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24023-2:2020)
- EN 573-3:2009 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
- EN 573-3:1994 Aluminium and Aluminium Alloys - Chemical Composition and Form of Wrought Products - Part 3: Chemical Composition
- EN 573-3:2003 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition
- EN 573-3:2013 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
- EN ISO 24023-1:2020 Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 24023-1:2020)
- EN 1744-1:1998 Tests for Chemical Properties of Aggregates - Part 1: Chemical Analysis
- EN 12805:2002 Automotive LPG components - Containers
- EN ISO 13693-1:2017 Irrigation equipment - Safety devices for chemigation - Part 1: Small plastics valves for chemigation (ISO 13693-1:2013)
- EN ISO 21068-3:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents (ISO 21068-3:2008)
- PD CEN/TR 10261:2013 Iron and steel - European standards for the determination of chemical composition
- CEN/TR 10261:2023 Iron and steel - European standards for the determination of chemical composition
- EN ISO 175:2000 Plastics - Methods of Test for the Determination of the Effects of Immersion in Liquid Chemicals
- EN ISO 17489:2013 Leather - Chemical tests - Determination of tan content in synthetic tanning agents
- prEN 977-1992 Underground tanks of glass-reinforced plastics (GRP); determination of chemical resistance
- EN ISO 175:2010 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
- EN 573-3:2013/FprA1:2021 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
- EN ISO 9453:2006 Soft solder alloys - Chemical compositions and forms ISO 9453:2006; Supersedes EN 29453:1993
- EN ISO 527-5:2021 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2021)
- EN ISO 527-5:2009 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
Danish Standards Foundation, chemical composition of plastic
- DS/EN ISO 9453:2007 Soft solder alloys - Chemical compositions and forms
- DS/EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
- DS/ISO/TR 10358:2002 Plastics pipes and fittings - Combined chemical-resistance classification table
- DS/EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates
- DS/EN 573-3:2013 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
- DS/EN ISO 294-2/A1:2005 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars
- DS/EN ISO 294-2:1999 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars.
- DS/EN ISO 21068-3:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents
- DS/CEN/TR 10261:2013 Iron and steel - European standards for the determination of chemical composition
- DS/EN ISO 10724-2:2000 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2: Small plates
- DS/EN 12698-1:2007 Chemical analysis of nitride bonded silicon carbide refractories - Part 1: Chemical methods
- DS/EN ISO 294-1/A1:2002 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens
- DS/EN ISO 294-1:1999 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens
- DS/EN 637:1995 Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method
- DS/EN 12814-8/AC:2003 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements
- DS/EN 12814-8:2001 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements
- DS/EN ISO 10724-1:2001 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of multipurpose test specimens
- DS/EN ISO 175:2010 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals
IT-UNI, chemical composition of plastic
API - American Petroleum Institute, chemical composition of plastic
ES-UNE, chemical composition of plastic
- UNE-EN ISO 9453:2021 Soft solder alloys - Chemical compositions and forms (ISO 9453:2020)
- UNE-EN ISO 294-4:2019 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2018)
- UNE-EN 573-3:2020+A1:2023 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
- UNE-EN ISO 13693-1:2018 Irrigation equipment - Safety devices for chemigation - Part 1: Small plastics valves for chemigation (ISO 13693-1:2013)
- UNE-EN ISO 21068-3:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents (ISO 21068-3:2008) (Endorsed by AENOR in October of 2008.)
- UNE-EN 12814-8:2022 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements
未注明发布机构, chemical composition of plastic
HU-MSZT, chemical composition of plastic
Professional Standard - Light Industry, chemical composition of plastic
- QB/T 1967.3-2017 Test method for chemical composition analysis of white ceramic pigment
- QB/T 1967.5-2017 Test method for chemical composition analysis of black ceramic pigment
- QB/T 2578-2002 Standard test method for chemical composition of ceramic materials by spectrophotometry
- QB/T 1967.1-2017 Test method for chemical composition analysis of color ceramic pigment
- QB/T 1272-1991 Preparation of samples for chemical analysis of finished fur products and general rules for chemical analysis
SAE - SAE International, chemical composition of plastic
Society of Automotive Engineers (SAE), chemical composition of plastic
Professional Standard - Tobacco, chemical composition of plastic
- YC/T 235.5-2007 General tolerances- Part 5: Plastic piece made from plastic semi-manufactured goods
SE-SIS, chemical composition of plastic
- SIS SS 24 82 43-1979 Rubber or thermoplastic hose for transferring chemicals
- SIS SS-ISO 175:1987 Plastics - Determ i nation of the effects of liquid chemicals, including water
- SIS SS 16 11 56-1984 Plastics — Amorphous thermoplastic moulding materials — Preparation of test specimens with a defined level of shrinkage — Part 1: Test specimens in the form of parallelepipedic bars (Injec- tion moulding and compression moulding)
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, chemical composition of plastic
- GB/T 222-2006 Permissible tolerances for chemical composition of steel products
- GB 20265-2006 Moulded plastics industrial boots with chemical resistance
- GB/T 11436-1989 Chemical analysis methods for products and semifinished products made of soft ferrite materials
- GB/T 11436-2012 Chemical analysis methods for products and semi-finished products made of soft ferrite materials
- GB/T 222-1984 Method of sampling steel for determination of chemical composition and permissible variations for product analysis
- GB/T 11547-2008 Plastic.Methods of test for the determination of the effects of immersion in liquid chemicals
- GB/T 28898-2012 Evaluation of uncertainty in chemical composition analysis for metallurgical materials
- GB/T 3190-2020(英文版) Chemical composition of wrought aluminium and aluminium alloys
- GB/T 42922-2023 Chemical method for the determination of organic solvent extractables in plastics
- GB/T 33061.11-2022 Plastics—Determination of dynamic mechanical properties—Part 11: Glass transition temperature
- GB/T 6900-2016(英文版) Chemical analysis of alumina silica refractories
- GB/T 5070-2015(英文版) Chemical analysis of refractories containing chrome
UY-UNIT, chemical composition of plastic
American National Standards Institute （ANSI), chemical composition of plastic
American Society for Testing and Materials (ASTM), chemical composition of plastic
- ASTM E1833-07a Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition
- ASTM E1833-96(2001) Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition
- ASTM E1833-96 Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition
- ASTM D543-06 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
- ASTM D543-95(2001) Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
- ASTM D543-95 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
- ASTM D543-14 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
- ASTM D543-20 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
- ASTM D1239-22 Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals
- ASTM D543-21 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
- ASTM B772-97 Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)
- ASTM B772-97(2003) Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)
- ASTM B772-97(2008) Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)
- ASTM B772-97(2012) Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)
- ASTM D123-03 Standard Terminology Relating to Textiles
- ASTM D123-09 Standard Terminology Relating to Textiles
- ASTM D1239-98(2006)e1 Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals
- ASTM D1239-07 Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals
- ASTM D1239-22a Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals
- ASTM D123-15a Standard Terminology Relating to Textiles
- ASTM D123-15 Standard Terminology Relating to Textiles
- ASTM D123-15be1 Standard Terminology Relating to Textiles
- ASTM D3647-09 Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition
- ASTM C1147-14 Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics
- ASTM F665-98 Standard Classification for Vinyl Chloride Plastics Used in Biomedical Application
- ASTM F665-09 Standard Classification for Vinyl Chloride Plastics Used in Biomedical Application
- ASTM C1147-14(2022) Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics
- ASTM C1147-01(2012) Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics
- ASTM E877-13 Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials for Determination of Chemical Composition and Physical Properties
BE-NBN, chemical composition of plastic
- NBN EN 573-3-1995 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3 : Chemical composition
- NBN-EN 29453-1994 Soft solder alloys. Chemical compositions and forms (ISO 9453: 1990)
- NBN EN 573-2-1995 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 2 : Chemical symbol based designation system
Korean Agency for Technology and Standards (KATS), chemical composition of plastic
- KS D ISO 9453:2008 Soft solder alloys-Chemical compositions and forms
- KS D 8546-2008 Lead free soft solder alloys－Chemical compositions and forms
- KS M ISO 10724-2-2010(2020) Plastics－Injection moulding of test specimens of thermosetting powder moulding compounds(PMCs)－Part 2：Small plates
- KS M 1995-2009 Determination of organic compounds emitted from plastics－Gas chromatographic method
- KS M ISO 7510:2019 Plastics piping systems — Glass-reinforced plastics(GRP) components — Determination of the amounts of constituents
- KS M 3083-2004 Testing method for chemical resistance of fiber reinforced plastics
- KS M ISO 6721-11:2014 Plastics — Determination of dynamic mechanical properties — Part 11: Glass transition temperature
- KS M ISO 6721-11-2014(2019) Plastics — Determination of dynamic mechanical properties — Part 11: Glass transition temperature
- KS P ISO 8362-7:2020 Injection containers and accessories — Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part
- KS L 6510-2003(2018) Method for chemical analysis of silicon carbide abrasives
- KS L 6101-1999(2009) Method for chemical analysis of alumina abrasives
- KS L ISO 21068-3-2012(2022) Chemical analysis of silicon-carbide-containing raw materials and refractory products－Part 3：Determination of nitrogen, oxygen and metallic and oxidic constituents
- KS M ISO 175-2016(2021) Plastics－Methods of test for the determination of the effects of immersion in liquid chemicals
- KS L ISO 21068-3:2012 Chemical analysis of silicon-carbide-containing raw materials and refractory products-Part 3:Determination of nitrogen, oxygen and metallic and oxidic constituents
- KS L 3410-1995 Chemical analysis for high purity carbon materials
- KS D 2000-2012(2017) Methods for chemical analysis of silver brazing filler metals
- KS M ISO 10724-1-2010(2020) Plastics－Injection moulding of test specimens of thermosetting powder moulding compounds(PMCs)－Part 1：General principles and moulding of multipurpose test specimens
- KS M ISO 175:2011 Plastics-Methods of test for the determination of the effects of immersion in liquid chemicals
- KS M ISO 175:2016 Plastics－Methods of test for the determination of the effects of immersion in liquid chemicals
- KS M ISO 1874-1:2013 PLASTICS — POLYAMIDE(PA) MOULDING AND EXTRUSION MATERIALS — PART 1: DESIGNATION
- KS M ISO 1874-1:2008 Plastics-Polyamide(PA) moulding and extrusion materials-Part 1:Designation system and basis for specifications
- KS M ISO 14526-3:2006 Plastics－Phenolic powder moulding compounds(PF－PMCs)－Part 3：Requirements for selected moulding compounds
- KS D ISO 10384:2002 Hot-rolled carbon steel sheet as defined by chemical composition
- KS D ISO 10384:2013 Hot-rolled carbon steel sheet as defined by chemical composition
- KS M 3045-2018 Testing methods for chemical resistance of plastics under constant tensile load
- KS M ISO 12115-2002(2022) Fibre－reinforced plastics－Thermosetting moulding compounds and prepregs－Determination of flowability, maturation and shelf life
- KS M ISO 12115-2002(2017) Fibre－reinforced plastics－Thermosetting moulding compounds and prepregs－Determination of flowability, maturation and shelf life
- KS D 2589-2015(2020) Methods for chemical analysis of gold brazing filler metals
- KS L 3137-2016(2021) Chemical analysis of zircon refractories
SG-SPRING SG, chemical composition of plastic
- SS ISO 9453:1990 SPECIFICATION FOR Soft Solder Alloys - Chemical Compositions And Forms
KR-KS, chemical composition of plastic
- KS D 8546-2018(2023) Lead free soft solder alloys — Chemical compositions and forms
- KS M ISO 7510-2019 Plastics piping systems — Glass-reinforced plastics(GRP) components — Determination of the amounts of constituents
- KS P ISO 8362-7-2020 Injection containers and accessories — Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part
- KS M ISO 175-2016 Plastics－Methods of test for the determination of the effects of immersion in liquid chemicals
Association of German Mechanical Engineers, chemical composition of plastic
U.S. Military Regulations and Norms, chemical composition of plastic
- ARMY MIL-DTL-53039 C-2009 COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT
- ARMY QPL-53039-22 NOTICE 1-2009 Coating, Aliphatic Polyurethane, Single Component, Chemical Agent Resistant
- ARMY QPL-53039-22-2004 COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT
- ARMY MIL-DTL-53039 B-2005 COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT
FI-SFS, chemical composition of plastic
Lithuanian Standards Office , chemical composition of plastic
- LST EN ISO 9453:2014 Soft solder alloys - Chemical compositions and forms (ISO 9453:2014)
- LST EN ISO 9453:2007 Soft solder alloys - Chemical compositions and forms (ISO 9453:2006)
- LST EN ISO 9453:2020 Soft solder alloys - Chemical compositions and forms (ISO 9453:2020)
- LST EN 573-3-2009 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
- LST EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2001)
- LST EN ISO 294-3:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002)
- LST EN 12698-1-2007 Chemical analysis of nitride bonded silicon carbide refractories - Part 1: Chemical methods
- LST EN 637+AC-2002 Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method
- LST EN 12814-8-2002 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements
- LST EN 12814-8-2002/AC-2004 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements
- LST EN 12814-8-2021 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements
- LST EN ISO 294-2:2000 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996)
NL-NEN, chemical composition of plastic
- NEN-ISO 9453:1994 Soft solder alloys. Chemical compositions and forms (ISO 9453:1990)
AT-ON, chemical composition of plastic
CU-NC, chemical composition of plastic
- NC 04-75-1986 Material Testing. Welding. Test Specimen Preparation and Sampling Selection for Chemical Composition Determination
- NC 30-48-1986 Plastics. Compression Molding of Test Glass for Thermosetting Materials Testing, General Requirements
- NC 30-46-1986 Plastics. Compression Molding of Test Glass for Thermosetting Materials Testing. General Requirements
BR-ABNT, chemical composition of plastic
International Federation of Trucks and Engines, chemical composition of plastic
CEN - European Committee for Standardization, chemical composition of plastic
- EN 573-3:2007 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
- PREN 573-3-2018 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
- PD CEN/TR 10261:2018 Iron and steel - European standards for the determination of chemical composition
- PREN 12814-8-2019 Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements
Professional Standard - Aerospace, chemical composition of plastic
- QJ 2136.1-1991 Physical and chemical re-examination samples of metal materials stipulated chemical composition analysis samples
Professional Standard - Aviation, chemical composition of plastic
- HB 5421-1998 General rules and general regulations for chemical composition analysis methods of metallic materials
国家市场监督管理总局、中国国家标准化管理委员会, chemical composition of plastic
- GB/T 36702.1-2018 Irrigation equipment—Safety devices for chemigation—Part 1: Small plastics valves for chemigation
AR-IRAM, chemical composition of plastic
IN-BIS, chemical composition of plastic
国家能源局, chemical composition of plastic
- NB/T 34057.2-2017 Determination of chemical composition of lignocellulosic biomass raw materials Part 2: Purification of standard samples
- NB/T 34057.6-2017 Determination of chemical composition of lignocellulosic biomass raw materials Part 6: Determination of ash content
- NB/T 34057.3-2017 Determination of chemical composition of lignocellulosic biomass raw materials Part 3: Determination of moisture
- NB/T 34057.7-2020 Determination of chemical composition of lignocellulosic biomass raw materials Part 7: Determination of starch
- NB/T 34057.9-2020 Determination of chemical composition of lignocellulosic biomass raw materials Part 9: Determination of lipids
Professional Standard - Chemical Industry, chemical composition of plastic
- HG/T 2256-1991 Determination of ash content of couplers of photographic chemicals
- HG/T 2256-2011 Determination of ash content of couplers of photographic chemicals
- HG/T 5756～5758-2020 Analytical methods for chemical composition of catalysts for selective hydrogenation of benzene to cyclohexene, analytical methods for chemical composition of aluminum-based hydrogenation catalysts, and determination of reduction degree of catalysts for a
- HG/T 2257-1991 Determination of Volatile Content in Photochemical Couplers
- HG/T 2257-2011 Determination of Volatile Content in Photochemical Couplers
GM Daewoo, chemical composition of plastic
Malaysia Standards, chemical composition of plastic
CO-ICONTEC, chemical composition of plastic
(U.S.) Ford Automotive Standards, chemical composition of plastic
- FORD WD310-2004 THREAD FORMING SCREWS FOR PLASTIC - THROUGH HARDENED PT(R) HEXAGON COLLAR HEAD
CZ-CSN, chemical composition of plastic
ANSI - American National Standards Institute, chemical composition of plastic
- IT9.15-1997 Imaging Materials - Methods for the Evaluation of the Effectiveness of Chemical Conversion of Silver Images Against Oxidation (IS&T)
Group Standards of the People's Republic of China, chemical composition of plastic
- T/CPCIF 0150-2021 Plastics—Determination of ash— Program-controlled ashing furance method