ZH
RU
ES

Granularity use

Granularity use, Total:498 items.

In the international standard classification, Granularity use involves: Cutting tools, Road engineering, Ferroalloys, Particle size analysis. Sieving, Iron and steel products, Measurement of volume, mass, density, viscosity, Products of the textile industry, Domestic electrical appliances in general, Products of the chemical industry, Air quality, Raw materials for rubber and plastics, Gears, Non-metalliferous minerals, Coals, Soil quality. Pedology, Fuels, Organic chemicals, Chipless working equipment, Refractories, Powder metallurgy, Shipbuilding and marine structures in general, Non-ferrous metals, Electricity. Magnetism. Electrical and magnetic measurements, Optics and optical measurements, Machine tools, Lamps and related equipment, Metalliferous minerals, Tea. Coffee. Cocoa, Power stations in general, Switchgear and controlgear, Automatic controls for household use, Thermodynamics and temperature measurements, Paint ingredients, Paints and varnishes, On-board equipment and instruments, Earthworks. Excavations. Foundation construction. Underground works, Pipeline components and pipelines, Spices and condiments. Food additives, Miscellaneous domestic and commercial equipment, Textile fibres, Inorganic chemicals, Fasteners, Fluid power systems, Electronic tubes, Ceramics, Construction materials, Aerospace electric equipment and systems, Ferrous metals, Surface treatment and coating, Water quality, Medical equipment, Paper production processes, Services, Rubber and plastics products, Heat pumps, Geology. Meteorology. Hydrology, Flexible drives and transmissions, Machine tool systems, Materials for aerospace construction, Fertilizers, Protective equipment, Domestic safety, Products of non-ferrous metals, Special purpose vehicles, Diagnostic, maintenance and test equipment, Ventilators. Fans. Air-conditioners, Equipment for the chemical industry, Electrical wires and cables, Physics. Chemistry, Electrical accessories, Lubricants, industrial oils and related products, Protection against dangerous goods.

HU-MSZT, Granularity use

• MSZ 1698/2-1982

American National Standards Institute （ANSI), Granularity use

• ANSI B74.12-2012 Specifications for the Size of Abrasive Grain-Grinding Wheels, Polishing and General Industrial Uses
• ANSI/SAE J421-1993 Cleanliness Rating of Steels by the Magnetic Particle Method
• ANSI/SAE J444-1993 Cast Shot and Grit Size Specifications for Peening and Cleaning

RU-GOST R, Granularity use

• GOST 32860-2014 Automobile roads of general use. Rubble and sand slag. Determination of particle size distribution
• GOST 33029-2014 Automobile roads of general use. Crushed stone and gravel from rocks. Method for determination of granulometric composition
• GOST 32719-2014 Automobile roads of general use. Mineral powder. Method of determination of the grain
• GOST 34236-2017 Light and middle distillate fuels. Determination of sizing and counting particles by automatic particle counter
• GOST R 50568.2-1993 Urea for industrial use. Determination of alkalinity. Titrimetric method
• GOST R ISO 12984-2015 Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of particle size distribution
• GOST 3594.12-1993 Moulding refractory clays. Method for determination of size distribution by sieving clays
• GOST 21073.4-1975 Non-ferrous metals. Determination of grain size bu planimetric method
• GOST 23409.24-1978 Moulding sands and sand mixtures. Methods for determination of granulometric composition, fineness modulus and average size of sand base grain
• PNST 95-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determining the degree of coating grains of aggregate by asphalt binder
• PNST 71-2015 Automobile roads of general use. Mineral materials for preparing fine-grained asphalt concrete mixtures. Method for determination of density and absorption
• PNST 78-2015 Automobile roads of general use. Mineral materials for preparing coarse-grained asphalt concrete mixtures. Method for determination of density and absorption
• GOST 32823-2014 Automobile roads of general use. Slag sand. Determination of clay particles content (swelling method)
• GOST 32717-2014 Automobile roads of general use. Crushed sand. Determination of lamellar grains (flakiness) and needle shape
• GOST 32727-2014 Automobile roads of general use. Natural and crushed sand. Determination of particle size distribution and size of the module
• GOST 32725-2014 Automobile roads of general use. Natural and crushed sand. Method for determination of dust and clay particles
• GOST 32859-2014 Automobile roads of general use. Slag rubble and sand. Determination of dust and clay particles content
• GOST 32858-2014 Automobile roads of general use. Slag rubble. Determination of resistance of grain structure of slag rubble against decay
• PNST 75-2015 Automobile roads of general use. Mineral materials for the preparation of asphalt mixtures. The method of determining grain composition
• GOST 32762-2014 Automobile roads of general use. Mineral powder. Method for determination of moisture
• GOST 33101-2014 Automobile roads of general use. Road pavement. Roughness measurement methods
• GOST 32963-2014 Automobile roads of general use. Visibility distances. Methods of measurement
• GOST R 50568.3-1993 Urea for industrial use. Determination of iron content. Photometric method with use of 2, 2' - bipyridyl
• GOST 32708-2014 Automobile roads of general use. Natural and crushed sand. Method for determination of clay particles by swelling
• GOST 32861-2014 Automobile roads of general use. Rubble and sand slag. Determination of content of weak grains and metal impurities
• GOST 33055-2014 Automobile roads of general use. Crushed stone and gravel from rocks. Determination of the content of dust and clay particles
• GOST 32764-2014 Automobile roads of general use. Mineral powder. Method for determination of medium density and porosity
• GOST 31247-2004 Industrial cleanliness. Determination of fluid sample contamination using automatic particle counter
• PNST 74-2015 Automobile roads of general use. Materials coarse mineral for the preparation of asphalt mixtures. The method of determining of crushed grains
• GOST 32822-2014 Automobile roads of general use. Slag rubble and sand. Determination of bulk density and voidness
• GOST 25699.16-1990 Carbon black for rubber industry. Method for determination of individual pellet crushing strength
• PNST 73-2015 Automobile roads of general use. Fine-grained mineral materials for preparing asphalt mixtures. Method for determination of the void volume
• GOST 32864-2014 Automobile roads of general use. Slag rubble. Determination of grains of lamellar (flakiness) and needle shaped forms content
• GOST 32721-2014 Automobile roads of general use. Natural and crushed sand. Determination of bulk density and emptiness
• GOST 32821-2014 Automobile roads of general use. Rubble and sand slag. The definition of true density and porosity
• GOST 32763-2014 Automobile roads of general use. Mineral powder. The method of determining the true density
• GOST 33051-2014 Automobile roads of general use. Crushed stone and gravel from rocks. Determination of crushed particles in the gravel rubble and gravel
• PNST 9-2012 Automobile roads of general use. Viscous petroleum road bitumens. Determination of solubility
• PNST 3-2012 Automobile roads of general use. Viscous petroleum road bitumens. Determination of needle penetration
• GOST 33175-2014 Automobile roads of general use. Horizontal illuminance from artificial lighting. Control methods
• GOST 33176-2014 Automobile roads of general use. Horizontal illuminance from artificial lighting. Technical requirements
• GOST 33137-2014 Automobile roads of general use. Viscous road petroleum bitumens. Method for determination of dynamic viscosity by rotational viscometer
• GOST R ISO 14644-9-2013 Cleanrooms and associated controlled environments. Part 9. Classification of surface cleanliness by particle concentration
• PNST 11-2012 Automobile roads of general use. Viscous petroleum road bitumens. Determination of kinematic viscosity
• PNST 12-2012 Automobile roads of general use. Viscous petroleum road bitumens. Calculation of penetration index
• GOST 32722-2014 Automobile roads of general use. Natural and crushed sand. Determination of the true density
• PNST 131-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determining the density of the place of application with a gamma densitometer
• PNST 76-2015 Automobile roads of general use. The mineral materials for the preparation of asphalt mixtures. The method of determining the content of silt particles by washing
• PNST 6-2012 Automobile roads of general use. Viscous petroleum road bitumens. Test method determination of dynamic viscosity by rotational viscometer
• GOST 33134-2014 Automobile roads of general use. Viscous road petroleum bitumens. Determination of the penetration index
• GOST 33135-2014 Automobile roads of general use. Viscous petroleum road bitumens. Method for determination of solubility
• GOST R ISO 10142-2016 Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of grain stability using a laboratory vibration mill
• GOST 33054-2014 Automobile roads of general use. Crushed stone and gravel from rocks. Determination of grains of weak mining rocks in rubble (gravel)
• GOST 33056-2014 Automobile roads of general use. Crushed stone and gravel from rocks. Determination of resistance of grains of crushed stone (gravel) structure against decay

Association Francaise de Normalisation, Granularity use

• NF A36-620-4*NF EN 10222-4+A1:2021 Steel forgings for pressure purposes - Part 4 : weldable fine grain steels with high proof strength
• NF A36-620-4/IN1*NF EN 10222-4/IN1:2021 Steel forgings for pressure purposes - Part 4 : weldable fine grain steels with high proof strength
• NF EN 10222-4+A1:2021 Pièces forgées en acier pour appareils à pression - Partie 4 : aciers soudables à grains fins avec limite d'élasticité élevée
• NF EN 10222-4/IN1:2021 Pièces forgées en acier pour appareils à pression - Partie 4 : aciers soudables à grains fins avec limite d'élasticité élevée
• NF X11-681:1982 Particle size analysis. Particle size analysis by gravity sedimentation. Pipette method.
• NF T20-223:1973 Aluminium oxide primarily used for the production of aluminium. Particle size analysis. Sieving method.
• NF M03-040:1995 Hard coal. Size analysis by sieving.
• NF X11-670:1989 Particle size analysis in an electrolytic suspension using a resistance variation counter.
• NF X43-276*NF EN 481:1993 Workplace atmospheres. Size fraction definitions for measurement of airborne particles.
• NF A95-152:1993 Metallic powders. Determination of particle size by dry sieving.
• NF A20-008*NF ISO 4701:1986 Iron ores. Determination of size distribution by sieving.
• NF T30-044:1968 Paints. Determination of the particle size distribution of paint fillers by the ANDREASEN pipette method.
• NF T20-218*NF ISO 8220:1987 Aluminium oxide primarilly used for the production of aluminium. Determination of the fine particle size distribution (less than 60 micrometers). Method using electroformed sieves.
• NF B35-507:1983 Laboratory glassware. Enclosed-scale general purpose thermometers.
• NF P94-040:1993 Soils : investigation and testing. Practical method for identifying the 0/50 mm fraction of a granular material. Determination of particle size and blue value.
• NF A36-205-3:2009 Flat products made of steels for pressure purposes - Part 3 : weldable fine grain steels, normalized.
• NF X43-133*NF EN ISO 28439:2011 Workplace atmospheres - Characterization of ultrafine aerosols/nanoaerosols - Determination of the size distribution and number concentration using differential mobility analysing systems.
• NF X11-680:1980 PARTICLE SIZE ANALYSIS BY SEDIMENTATION METHOD IN THE GRAVITATIONAL FIELD IN A LIQUID.
• NF P18-566:2014 Granulats - Analyse granulométrique - Essai à l'aide d'un appareil d'ombroscopie
• NF EN ISO 8130-13:2019 Poudres pour revêtement - Partie 13 : analyse granulométrique par diffraction laser
• NF X34-214-3*NF EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3 : method by image analysis for large dimension particles
• NF EN 15234-6:2012 Biocombustibles solides - Assurance qualité du combustible - Partie 6 : granulés non ligneux à usage non industriel
• NF B35-506:1983 Laboratory glassware. Solid-stem general purpose thermometers.
• NF U44-182*NF EN 12948:2010 Liming materials - Determination of size distribution by dry and wet sieving
• NF X34-214-1*NF EN 15415-1:2011 Solid recovered fuels - Determination of particle size distribution - Part 1 : screen method for small dimension particles
• NF T30-499-13:2011 Coating powders - Part 13 : particle size analysis by laser diffraction.
• NF EN ISO 8130-1:2019 Poudres pour revêtement - Partie 1 : détermination de la distribution granulmétrique par tamisage
• NF E48-652:1990 Hydraulic fluid power. Fluids. Determination of overall particulate contamination by the gravimetric method.
• NF E48-651*NF ISO 4407:2002 Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope.
• NF A36-620-4/A1:2002 Steel forgings for pressure purposes - Part 4 : weldable fine grain steels with high proof strength.
• NF EN 16450:2017 Air ambiant - Systèmes automatisés de mesurage de la concentration de matière particulaire (PM10;PM2,5)
• NF X44-101-9*NF EN ISO 14644-9:2012 Cleanrooms and associated controlled environments - Part 9 : classification of surface cleanliness by particle concentration.
• FD X43-711-2*FD CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2 : evaluating airborne particle concentrations using Optical Particle Counters
• NF X11-680-1*NF ISO 13317-1:2001 Determination of particle size distribution by gravitational liquid sedimentation methods - Part 1 : general principles and guidelines
• NF X11-685-1*NF ISO 13318-1:2001 Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 1 : general principles and guidelines
• NF X43-021*NF EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10;PM2,5)
• NF T20-485:1973 Sodium tripolyphosphate and pyrophosphate for industrial use. Granulometric analysis by mechanical sieving.

Japanese Industrial Standards Committee (JISC), Granularity use

• JIS G 1641:1998 Methods of sampling for size analysis of ferroalloys and size determination
• JIS Z 8900-1:2008 Standards particles -- Part 1: Reference particles for calibrating particle size measurements apparatus
• JIS G 1641:1985 Methods of sampling for size analysis of ferroalloys and size determination
• JIS R 6011:1991 Testing method for grain size of coated abrasive macrogrits (P12-P220)
• JIS R 6012:1991 Testing method for grain size of coated abrasive microgrits (P240-P1200)
• JIS R 6010:1991 Coated abrasive grain sizes
• JIS K 6219-4:2006 Carbon black for rubber industry -- Characteristics of pelletized carbon black -- Part 4: Determination of pellet size distribution
• JIS B 6202:1998 General purpose parallel lathes -- Testing of the accuracy
• JIS B 7411:1997 Solid-stem general purpose liquid-in-glass thermometers
• JIS R 1619:1995 Testing method for size distribution of fine ceramic particles by liquid photosedimentation method
• JIS K 6219-3:2006 Carbon black for rubber industry -- Characteristics of pelletized carbon black -- Part 3: Determination of individual pellet crushing strength
• JIS B 1009:1991 Bolts, screws and studs -- Nominal lengths, and thread lengths for general purpose bolts
• JIS M 8706:2008 Iron ores and direct reduced iron -- Determination of size distribution by sieving
• JIS M 8706:2015 Iron ores and direct reduced iron -- Determination of size distribution by sieving
• JIS R 1622:1995 General rules for the sample preparation of particle size analysis of fine ceramic raw powder
• JIS B 7411-1:2014 Glass thermometers for general -- Part 1: General measuring instruments
• JIS B 1006:2009 Fasteners -- Thread run-outs for external thread in accordance with ISO general purpose metric screw threads

German Institute for Standardization, Granularity use

• DIN 66120:1983 Particle size analysis; size analysis by air classification with centrifugal counterflow classifier
• DIN 66120:2016 Particle size analysis - Size analysis by air classification with centrifugal counterflow classifier
• DIN 66118:1984 Particle size analysis; size analysis by air classification; fundamentals
• DIN EN 10222-4/A1:2019 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength; German and English version EN 10222-4:2017/prA1:2019
• DIN 66119:2016 Particle size analysis - Size analysis by air classification with gravitation-counterflow elutriator
• DIN 66119:1983 Particle size analysis; size analysis by air classification with gravitation-counterflow elutriator
• DIN 66119:2016-10 Particle size analysis - Size analysis by air classification with gravitation-counterflow elutriator
• DIN ISO 4497:1991 Metallic powders; determination of particle size by dry sieving; identical with ISO 4497:1983
• DIN EN 10028-3:2017-10 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized; German version EN 10028-3:2017
• DIN ISO 16000-42:2022-01 Indoor air - Part 42: Measurement of the particle number concentration by Condensation Particle Counters (ISO/DIS 16000-42:2021); Text in German and English / Note: Date of issue 2021-12-10
• DIN EN 16450:2017-07 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5); German version EN 16450:2017
• DIN EN 10217-3:2005 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes; German version EN 10217-3:2002 + A1:2005
• DIN 52098:2005 Aggregates test methods - Determination of particle size distribution by wet sieving
• DIN EN 10028-6:2017-10 Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered; German version EN 10028-6:2017
• DIN 33899-3:2014 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
• DIN EN 623-3:2003 Advanced technical ceramics - Monolithic ceramics; General and textural properties - Part 3: Determination of grain size and size distribution (characterized by the linear intercept method); German version EN 623-3:2001
• DIN ISO 7708:1996 Air quality - Particle size fraction definitions for health-related sampling (ISO 7708:1995)
• DIN 33899-1:2014 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 1: Choice of monitor for specific applications
• DIN 33899-2:2014 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
• DIN EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles; German version EN 15415-3:2012
• DIN 33899-2:2014-02 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
• DIN 22018:1985 Investigations of the raw material in hard-coal-mining determation of the particle-density-distribution by float-and-sink-analysis

Danish Standards Foundation, Granularity use

• DS/EN 10222-4+A1:2002 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
• DS/EN 24497:1994 Metallic powders-Determination of particle size by dry sieving
• DS/ISO 21501-4:2007 Determination of particle size distribution - Single particle light interaction methods - Part 4: Light scattering airborne particle counter for clean spaces
• DS/EN 12948:2011 Liming materials - Determination of size distribution by dry and wet sieving
• DS/EN 10222-4:2021 Steel forgings for pressure purposes – Part 4: Weldable fine grain steels with high proof strength
• DS/CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
• DS/CEN/TS 16450:2013 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)

Lithuanian Standards Office , Granularity use

• LST EN 10222-4-2000 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
• LST EN 10222-4-2000/A1-2003 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
• LST EN 10222-4+A1-2021 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
• LST EN 12948-2011 Liming materials - Determination of size distribution by dry and wet sieving
• LST 1360.7-1995 Soils for road construction. Testing methods. Determination density of solid particles

IT-UNI, Granularity use

• UNI EN 10222-4-2021 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
• UNI 6887-1971
• UNI 7374-1974
• UNI 6886-1971
• UNI 7610-1976
• UNI 7609-1976
• UNI 6885-1971
• UNI 7352-1974
• UNI 5788-1966

AENOR, Granularity use

• UNE-EN 10222-4:2017 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
• UNE-EN 10217-3:2003 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes.
• UNE-EN 12948:2011 Liming materials - Determination of size distribution by dry and wet sieving
• UNE 103900:2013 In situ determination of density and moisture content of soil and granular materials by nuclear methods: low depths.
• UNE 7138:1958 GRANULOMETRIC AND CHEMICAL ANALYSIS OF CALCIUM CHLORIDE USED AS AN ADDUCT OF CONCRETES.
• UNE 34232:1981 SODIUM CHLORIDE USED AS TABLE SALT. DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY MECHANICAL SIEVING.
• UNE-EN 16450:2017 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)

ES-UNE, Granularity use

• UNE-EN 10222-4:2017+A1:2022 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
• UNE-EN 1150:1999 Protective clothing - Visibility clothing for non-professional use - Test methods and requirements

CZ-CSN, Granularity use

• CSN 25 7610-1981 Glass areometer of constant mass. Densimeters for general purposes. Dimensions
• CSN EN 481-1994 Workplace atmospheres. Size fraction definitions for measurement of airborne particles
• CSN 03 1006-1979 Gear-boxes for general use. Shaft heights
• CSN 64 3019-1979 Low density polyethyle-ne for speciál purposes
• CSN 44 1324-1985 Determination of the bulk density of coal for special purposes
• CSN 44 1324-1963 Determination of ?he bulk density of coal for special purposes
• CSN 65 1025 Cast.11-1989 Sulphuric acid for industrial use. pectrophotometric method for the etermination of iron
• CSN ISO 691:1994 Wrench and socket openings-Metric series-Tolerances for general use
• CSN 03 1806-1986 Variable speed with wide V belt for general use. General technical requirements
• CSN 02 6204-1976 Shaft couplings for general use. Torque, bore diameters and hub lengths
• CSN 65 1025 Cast.10-1989 Sulphuric acid for industrial use. pectrophotometric method for the etermination of total nitrogen xides
• CSN ISO 888:1995 Fasteners. Bolts, screws and studs. Nominal lengths and thread lengths for general purpose bolts

YU-JUS, Granularity use

• JUS K.F0.001-1989 Grain si7.es of fused alumlnium oxlde and sIlicon carbide for bonded abrasive products. ?esignaticm and graJn slze distribution
• JUS K.F0.005-1989 Gralns of fused alumiuium oxide and silicon carbide for boodod abrasivc products. Particle si?e measurement of microgrfts by Eppendorf - photosedimentometer
• JUS K.F0.002-1989 GraJns of fused aluminium oxide and silicon carbide for boodod abrasivc products. Grain si?e analysis of macrogrits F 4 to F 220
• JUS K.F0.033-1989 GraJns of fused aluminium oxlde and sIlIcon carbide for coated abrasive producls. Grain slze analysis of microgrits P 240 to P 1200
• JUS K.F0.032-1989 Grains of fused aluminium oxJde and slllcon carbide for coated abrasive products. Graln sir.e analysls of macrogrlts P 12 to P 220
• JUS K.F0.004-1989 Gralns of fused alumlnium oxide and slllccm carbide for bonded abrasive. products. Grala si?e analysis of microgrits P 230 to F 1200
• JUS K.F0.031-1989 Grains of fused aluminJuti oxide and sillcou carbide for coated abrasive products. raiv slze dlstrlbutltm and designatlon
• JUS K.F0.006-1988 Grains of fused alumininm oxfdo and silJcon carbide for abrasivo products. DeterminatIon of the buJk densfty of tbe abraslve grains
• JUS H.B8.617-1979 Aluminium oxide primarily used for the production of ahiminium. Particle si?e analysis. Sieving metho?
• JUS B.E4.359-1983 Laboratory glassware and accessorias. Liquid-in~glass thermomaters for special purpotst
• JUS B.E4.340-1984 Laboratorf glassmre andaccessories. Density hydrometers for generalpurposes
• JUS E.B8.035-1987 Durum wheat for milling industry, Estimation of yellowpigment. Spectrophotometric method

Korean Agency for Technology and Standards (KATS), Granularity use

• KS D 0046-2002 Methods of sampling for size analysis of ferroalloys and size determination
• KS L 6522-2001 Coated abrasives-Grain sizes
• KS L 6001-2002(2017) Bonded abrasive grain sizes
• KS L 6513-2001 Testing methods for bonded abrasive grain size
• KS E ISO 1953:2002 Hard coal－Size analysis by sieving
• KS E ISO 728:2002 Coke(nominal top size greater than 20 mm)－Size analysis by sieving
• KS C 7521-2020 Standard lamps of luminous intensity (general use)
• KS E ISO 6230:2003 Manganese ores－Determination of size distribution by sieving
• KS H ISO 11286:2007 Tea－Classification of grades by particle size analysis
• KS D ISO 9327-4:2003 Steel forgings and rolled or forged bars for pressure purposes-Technical delivery conditions-Part 4:Weldable fine grain steels with high proof strength
• KS L 6524-2001 Coated abrasives-Determination of grain size distribution of microgrits P240 to P2500
• KS I ISO 7708-2010(2016) Air quality－Particle size fraction definitions for health-related sampling
• KS I 2004-2005(2010) Air quality－Particle size fraction definitions for health-related sampling
• KS A 0508-1992(2002) GENERAL RULES FOR THE DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY SEDIMENTATION IN LIQUID
• KS M ISO 8130-1:2008 Coating powders－Part 1：Determination of particle size distribution by sieving
• KS B 1065-2015(2020) Bolts, screws and studs－Nominal lengths, andthread lengths for general purpose bolts
• KS I ISO 4405:2005 Hydraulic fluid power－Fluid contamination－Determination of particulate contamination by the gravimetric method
• KS L 6523-2001 Coated abrasives-Determination of grain size distribution of microgrits P12 to P220
• KS P ISO 8871-3:2020 Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 3: Determination of released-particle count
• KS A 0509-1992(2002) DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY THE SEDIMENTATION IN LIQUID USING THE PIPPETTE APPARATUS
• KS M ISO 12984:2004 Carbonaceous materials used in the production of aluminium－Calcined coke－Determination of particle size distribution
• KS M ISO 12984-2004(2019) Carbonaceous materials used in the production of aluminium－Calcined coke－Determination of particle size distribution
• KS K ISO 13982-1-2012(2017) Protective clothing for use against solid particulates－Part 1：Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates(type 5
• KS I ISO 28439:2013 Workplace atmospheres ― Characterization of ultrafine aerosols/ nanoaerosols ― Determination of the size distribution and number concentration using differential electrical mobility analysing systems
• KS M ISO 2926:2010 Aluminium oxide primarily used for the production of aluminium-Particle size analysis for the range 45μm to 150μm - Method using electroformed sieves
• KS L 1614-2001(2016) Determination of particle size distributions for fine ceramic raw powders by laser diffraction method
• KS L 1614-2001(2021) Determination of particle size distributions for fine ceramic raw powders by laser diffraction method
• KS C IEC 60730-2-13:2002 Automatic electrical controls for household and similar use－Part 2：Particular requirements for humidity sensing controls
• KS M ISO 649-1:2001 Laboratory glassware－Density hydrometers for general purposes－Part 1：Specification
• KS B ISO 649-1-2017(2022) Laboratory glassware — Density hydrometers for general purposes — Part 1: Specification

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Granularity use

• GB/T 9258.1-2000 Coated abrasives-Grain size analysis-Part 1: Grain size distribution test
• GB/T 9258.2-2000 Coated abrasives-Grain size analysis-Part 2: Determination of grain size distribution of macrogrits P12 to P220
• GB/T 9258.2-2008 Coated abrasives.Grain size analysis.Part 2:Determination of grain size distribution of macrogrits P12 to P220
• GB/T 14853.6-2002 Rubber compounding ingredients--Carbon black,pelletized--Determination of individual pellet crushing trength
• GB/T 15057.11-1994 Limestone for chemical industry- Determination of size
• GB/T 26647.1-2011 Determination of particle size distribution.Single-particle light interaction methods.Part 1:Light interaction considerations
• GB/T 9258.3-2000 Coated abrasives-Grain size analysis-Part 3: Determination of grain size distribution of microgrits P240 to P2500
• GB/T 9258.3-2017 Coated abrasives.Grain size analysis.Part 3:Determination of grain size distribution of microgrits P240 to P2 500
• GB/T 14853.6-2013 Rubber compounding ingredients.Pelletized carbon black.Part 6:Determination of individual pellet crushing strength
• GB/T 30202.2-2013 Test method for granular coal-based activated carbon for desulfurization and denitration process.Part 2 : Particle size
• GB/T 22687-2008 Bimetal temperature controls for household and similar use
• GB/T 22688-2008 Pressure-type temperature controls for household and similar use
• GB/T 25266-2010 Paints.Determination of the particle size distribution of paint fillers by the ANDREASEN pipette method
• GB/T 14853.4-2002 Rubber compounding ingredients--Carbon black,pelletized--Determination of mass strength
• GB/T 14853.1-2002 Rubber compounding ingredients--Carbon black,pelletized--Determination of pour density
• GB/T 13025.1-1991 General test method in salt industry--Determination of grain size
• GB/T 13025.1-2012 General test method in salt industry.Determination of grain size
• GB/T 15445.5-2011 Representation of results of particle size analysis.Part 5:Methods of calculations relating to particle size analyses using logarithmic normal probability distribution
• GB/T 2481.1-1998 Bonded abrasives--Determination and designation of grain size distribution--Part 1: Macrogrits F4 to F220
• GB/T 14853.4-2013 Rubber compounding ingredients.Pelletized carbon black.Part 4:Determination of mass strength
• GB/T 14853.1-2013 Rubber compounding ingredients.Pelletized carbon black.Part 1:Determination of pour density
• GB 31459-2015 Safety requirements for temperature control systems for floor heating for household and similar use
• GB/T 27613-2011 Hydraulic fluid power - Fluid contamination.Determination of particulate contamination by the gravimetric method
• GB/T 30202.3-2013 Test method for granular coal-based activated carbon for desulfurization and denitration process.Part 3 : Abrasive resistance and compression strength
• GB 14536.15-1999 Automatic electrical controls for household and similar use Particular requirements for humidity sensing controls
• GB 14536.10-1996 Automatic electrical controls for household and similar use. Particular requirements for temperature sensing contrls
• GB/T 14536.15-2008 Automatic electrical controls for household and similar use - Particular requirements for humidity sensing controls
• GB/T 14536.10-2008 Automatic electrical controls for household and similar use - Particular requirements for temperature sensing controls
• GB 14536.10-2008 Automatic electrical controls for household and similar use.Particular requirements for temperature sensing controls
• GB 14536.15-2008 Automatic electrical controls for household and similar use.Particular requirements for humidity sensing controls
• GB/T 21756-2008 Chemical products for industrial use.Determination of relative temperature of spontaneous flammable of solids

U.S. Military Regulations and Norms, Granularity use

• ARMY P-D-245 F (1)-1991 DETERGENT, GENERAL PURPOSE, LAUNDRY AND HAND DISHWASHING (GRANULAR)
• ARMY P-D-245 F-1990 DETERGENT, GENERAL PURPOSE, LAUNDRY AND HAND DISHWASHING (GRANULAR)

Group Standards of the People's Republic of China, Granularity use

• T/CAQI 13-2016 Household and similar drinking water conditioning equipment—— Granular active carbon
• T/SAEPI 003-2019 Commercial Indoor Particles Concentration Detection System
• T/AQSPMK 004-2023 Color standard card for chromaticity measurement of fiber color masterbatch
• T/AQSPMK 0004-2023 Color standard card for chromaticity measurement of fiber color masterbatch
• T/SSM 5-2022 Calibration specifications for particle number concentration measuring instruments used in motor vehicle emissions
• T/CEC 426.3-2022 General Technical Conditions for Electric Power Oil Testing Instruments Part 3: Particle Size Meter
• T/CAB 0147-2022 Household and similar electrical appliances-Safety-Arrangement method for heating temperature points
• T/CAQI 86-2019 Technical requirements and test method of air freshness for household and similar fresh-air air cleaner

BE-NBN, Granularity use

• NBN-ISO 2066:1992 Expanded pure agglomerated cork. Determination of moisture content
• NBN B 11-013-1985
• NBN T 03-426-1988 Aluminium oxide primarily used for the production of aluminium - Determination of the fine particle size distribution (less than 60 u.m) - Method using electroformed sieves
• NBN E 62-001-1973

United States Navy, Granularity use

• NAVY A-A-59155-2003 NITROGEN, HIGH PURITY, SPECIAL PURPOSE
• NAVY A-A-59155 VALID NOTICE 1-2008 Nitrogen, High Purity, Special Purpose
• NAVY MIL-E-24617 A-1995 EDTA HARDNESS TESTING REAGENTS, BOILER FEEDWATER, SHIPBOARD USE
• NAVY MIL-PRF-81322 G-2005 GREASE, AIRCRAFT, GENERAL PURPOSE, WIDE TEMPERATURE RANGE, NATO CODE G-395
• NAVY MIL-M-23167 B (1)-1978 METER, FREQUENCY, EXPANDED SCALE SWITCHBOARD TYPE (NAVAL SWITCHBOARD USE)
• NAVY MIL-M-23167 B-1969 METER, FREQUENCY, EXPANDED SCALE SWITCHBOARD TYPE (NAVAL SWITCHBOARD USE)

ES-AENOR, Granularity use

• UNE 40-528-1986
• UNE 28 012 h1
• UNE 28 012 h2
• UNE 57 007

AT-ON, Granularity use

• ONORM EN 481-1993 Workplace atmospheres - Size fraction definitions for measurement of airborne particles
• ONORM EN 10028-3-1993 Fiat products made of steels for pressure purposes -Part 3: Weldable fine grain steels, normalized
• ONORM M 1157-3-1994 Testing methods for foundry sands - Determination of grain size distribution (sieve grading)
• ONORM B 3683-1991 Technical asphalts for road construction and related purposes — Determination of bulk density

British Standards Institution (BSI), Granularity use

• 19/30396207 DC BS EN 10222-4 AMD1. Steel forgings for pressure purposes. Part 4. Weldable fine grain steels with high proof strength
• BS ISO 21501-3:2019 Determination of particle size distribution. Single particle light interaction methods - Light extinction liquid-borne particle counter
• BS EN 24497:1993 Metallic powders - Determination of particle size by dry sieving
• BS ISO 21501-2:2019 Determination of particle size distribution. Single particle light interaction methods - Light scattering liquid-borne particle counter
• BS 3625:1963 Specification for eyepiece and screen graticules for the determination of the particle size of powders
• BS ISO 11286:2004 Tea - Classification of grades by particle size analysis
• BS ISO 21501-4:2018+A1:2023 Determination of particle size distribution. Single particle light interaction methods - Light scattering airborne particle counter for clean spaces
• BS ISO 9276-5:2005 Representation of results of particle size analysis - Methods of calculation relating to particle size analyses using logarithmic normal probability distribution
• BS EN ISO 8130-1:1993 Coating powders. Determination of particle size distribution by sieving
• BS EN ISO 8130-1:2010 Coating powders. Determination of particle size distribution by sieving
• BS EN 10028-3:2017 Tracked Changes. Flat products made of steels for pressure purposes. Weldable fine grain steels, normalized
• BS EN ISO 8130-13:2010 Coating powders. Particle size analysis by laser diffraction
• BS EN ISO 8130-13:2001 Coating powders. Particle size analysis by laser diffraction
• 19/30385918 DC BS ISO 21501-3. Determination of particle size distribution. Single particle light interaction methods. Part 3. Light extinction liquid-borne particle counter
• BS EN 10028-5:2017 Tracked Changes. Flat products made of steels for pressure purposes. Weldable fine grain steels, thermomechanically rolled
• BS EN 10028-6:2017 Tracked Changes. Flat products made of steels for pressure purposes. Weldable fine grain steels, quenched and tempered
• 19/30385915 DC BS ISO 21501-2. Determination of particle size distribution. Single particle light interaction methods. Part 2. Light scattering liquid-borne particle counter
• 21/30396033 DC BS ISO 16000-42. Indoor air - Part 42. Measurement of the particle number concentration by Condensation Particle Counters
• BS 3G 148:1981 Specification for general purpose platinum temperature sensors for aircraft
• BS 1438:2004 Aggregates - Single-sized aggregates for use as a medium in biological percolating filters
• 21/30419440 DC BS ISO 21501-4 AMD1. Determination of particle size distribution. Single particle light interaction methods. Part 4. Light scattering airborne particle counter for clean spaces
• BS ISO 13317-4:2014 Determination of particle size distribution by gravitational liquid sedimentation methods. Balance method
• BS EN 16450:2017 Tracked Changes. Ambient air. Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
• BS ISO 13317-1:2001 Determination of particle size distribution by gravitational liquid sedimentation methods - General principles and guidelines
• BS EN 12948:2010 Liming materials. Determination of size distribution by dry and wet sieving
• BS ISO 20290-1:2021 Aggregates for concrete. Test methods for mechanical and physical properties - Determination of bulk density, particle density, particle mass-per-volume and water absorption
• 22/30441335 DC BS EN 61547 AMD1. Equipment for general lighting purposes. EMC immunity requirements
• BS EN IEC 61547:2023 Tracked Changes. Equipment for general lighting purposes. EMC immunity requirements
• 17/30346753 DC BS ISO 9328-3. Steel flat products for pressure purposes. Technical delivery conditions. Part 3. Weldable fine grain steels, normalized
• BS ISO 13317-2:2001 Determination of particle size distribution by gravitational liquid sedimentation methods - Fixed pipette method
• BS EN 12948:2002 Liming materials - Determination of size distribution by dry and wet sieving
• BS ISO 13318-3:2004 Determination of particle size distribution by centrifugal liquid sedimentation methods - Centrifugal X-ray method
• BS 5663-2:1987 Methods of testing iron ores - Determination of size distribution by sieving
• BS ISO 12984:2018 Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of particle size distribution
• BS ISO 13317-3:2001 Determination of particle size distribution by gravitational liquid sedimentation methods - X-ray gravitational technique
• BS EN ISO 28439:2011 Workplace atmospheres. Characterization of ultrafine aerosols/nanoaerosols. Determination of the size distribution and number concentration using differential electrical mobility analysing systems
• BS PD CEN/TR 16013-2:2010 Workplace exposure — Guide for the use of direct-reading instruments for aerosol monitoring Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
• 19/30373025 DC BS ISO 20290-1. Aggregates for concrete. Test methods for mechanical and physical properties. Part 1. Determination of bulk density, particle density, particle mass-per-volume and water absorption
• BS EN 60730-2-9:2011 Automatic electrical controls for household and similar use. Particular requirements for temperature sensing controls
• BS EN 60730-2-9:2010 Automatic electrical controls for household and similar use. Particular requirements for temperature sensing controls
• 17/30346759 DC BS ISO 9328-5. Steel flat products for pressure purposes. Technical delivery conditions. Part 5. Weldable fine grain steels, thermomechanically rolled

Professional Standard - Machinery, Granularity use

• JB 3630-1984 Abrasive particle size composition for coated abrasives
• JB/T 8967-1999 Pressure-type thermostats for household and similar use
• JB/T 3751-1997 Double metal temperature controller for domestic use and similar purpose

American Society for Testing and Materials (ASTM), Granularity use

• ASTM D6913-04 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
• ASTM D6913-04e1 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
• ASTM D6913-04(2009) Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
• ASTM D7928-21 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
• ASTM D7928-16e1 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
• ASTM D7928-21e1 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
• ASTM D7928-17 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
• ASTM F660-83(2002)e1 Standard Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters
• ASTM F660-83(2007) Standard Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters
• ASTM F660-83(2013) Standard Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters
• ASTM E1772-95 Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
• ASTM E1772-95(2001) Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
• ASTM D8049-17 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
• ASTM D4016-08 Standard Test Method for Viscosity of Chemical Grouts by Brookfield Viscometer (Laboratory Method)
• ASTM D8049-16 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
• ASTM C357-07 Standard Test Method for Bulk Density of Granular Refractory Materials
• ASTM D448-03 Standard Classification for Sizes of Aggregate for Road and Bridge Construction
• ASTM D448-03a Standard Classification for Sizes of Aggregate for Road and Bridge Construction
• ASTM D448-08 Standard Classification for Sizes of Aggregate for Road and Bridge Construction
• ASTM D448-12 Standard Classification for Sizes of Aggregate for Road and Bridge Construction
• ASTM F1226-89(1994)e1 Standard Test Method for Calibration of Liquid-Borne Particle Counters for Submicrometer Particle Sizing (Withdrawn 2002)
• ASTM D7619-10 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
• ASTM D2977-03 Standard Test Method for Particle Size Range of Peat Materials for Horticultural Purposes
• ASTM E382-07 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
• ASTM A595/A595M-18 Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
• ASTM A595/A595M-22 Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
• ASTM D2728-98(2019) Standard Practice for Paving Uses and Application Temperatures for Road Tars
• ASTM F328-98 Standard Practice for Calibration of an Airborne Particle Counter Using Monodisperse Spherical Particles
• ASTM E2980-15 Standard Test Methods for Estimating Average Particle Size of Powders Using Air Permeability
• ASTM B609/B609M-12e1 Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
• ASTM B609/B609M-99(2010) Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
• ASTM B609/B609M-12(2016) Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
• ASTM D6913-04e2 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
• ASTM D6913/D6913M-17 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
• ASTM E2980-20 Standard Test Methods for Estimating Average Particle Size of Powders Using Air Permeability
• ASTM B624-99 Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application
• ASTM E799-92(1998) Standard Practice for Determining Data Criteria and Processing for Liquid Drop Size Analysis
• ASTM D5158-98(2019) Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air-Jet Sieving
• ASTM A1082/A1082M-16(2021) Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications

Indonesia Standards, Granularity use

• SNI 13-6580-2001 Test methods for particle size distribution of peat materials for horticultural purposes

IN-BIS, Granularity use

• IS 1480-1970
• IS 3087-1985
• IS 5257-1969
• IS 120-1962
• IS 4848-1981
• IS 123-1962

European Committee for Standardization (CEN), Granularity use

• EN ISO 4497:2020 Metallic powders - Determination of particle size by dry sieving (ISO 4497:2020)
• EN 481:1993 Workplace atmospheres; size fraction definitions for measurement of airborne particles
• EN 10028-6:2009 Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
• EN 10028-6:1996 Flat Products Made of Steels for Pressure Purposes - Part 6: Weldable Fine Grain Steels, Quenched and Tempered
• EN 10028-6:2017 Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels@ quenched and tempered
• EN 24497:1993 Metallic powders; determination of particle size by dry sieving (ISO 4497:1983)
• EN ISO 8130-13:2010 Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2001)
• EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
• EN ISO 8130-1:2010 Coating powders - Part 1: Determination of particle size distribution by sieving (ISO 8130-1:1992)
• EN 10273:2007 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
• EN 10273:2000 Hot Rolled Weldable Steel Bars for Pressure Purposes with Specified Elevated Temperature Properties
• EN 10273:2016 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
• CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
• PD CEN/TS 16450:2013 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
• EN 10216-3:2002 Seamless Steel Tubes for Pressure Purposes - Technical Delivery Conditions - Part 3: Alloy Fine Grain Steel Tubes Includes Amendment A1:2004
• EN ISO 14644-9:2012 Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration (ISO 14644-9:2012)
• EN ISO 14644-9:2022 Cleanrooms and associated controlled environments - Part 9: Assessment of surface cleanliness for particle concentration (ISO 14644-9:2022)

International Organization for Standardization (ISO), Granularity use

• ISO 4497:1983 Metallic powders; Determination of particle size by dry sieving
• ISO/TS 4807:2022 Reference materials for particle size measurement — Specification of requirements
• ISO 21501-3:2019 Determination of particle size distribution — Single particle light interaction methods — Part 3: Light extinction liquid-borne particle counter
• ISO 21501-2:2019 Determination of particle size distribution — Single particle light interaction methods — Part 2: Light scattering liquid-borne particle counter
• ISO 11286:2004 Tea - Classification of grades by particle size analysis
• ISO 9327-4:1999 Steel forgings and rolled or forged bars for pressure purposes - Technical delivery conditions - Part 4: Weldable fine grain steels with high proof strength
• ISO 9328-3:2004 Steel flat products for pressure purposes - Technical delivery conditions - Part 3: Weldable fine grain steels, normalized
• ISO 4405:1991 Hydraulic fluid power; fluid contamination; determination of particulate contamination by the gravimentric method
• ISO 9276-5:2005 Representation of results of particle size analysis - Part 5: Methods of calculation relating to particle size analyses using logarithmic normal probability distribution
• ISO 3118:1976 Sodium perborates for industrial use; Determination of particle size distribution by mechanical sieving
• ISO 12984:2000 Carbonaceous materials used in the production of aluminium - Calcined coke - Determination of particle size distribution
• ISO 8130-1:1992 Coating powders; part 1: determination of particle size distribution by sieving
• ISO 5915:1980 Sodium hexafluorosilicate for industrial use; Determination of particle size distribution; Sieving method
• ISO 2926:1974 Aluminium oxide primarily used for the production of aluminium; Particle size analysis; Sieving method
• ISO 12984:2018 Carbonaceous materials used in the production of aluminium - Calcined coke - Determination of particle size distribution
• ISO 8573-3:1999 Compressed air - Part 3: Test methods for measurement of humidity
• ISO 8130-13:2001 Coating powders - Part 13: Particle size analysis by laser diffraction
• ISO 4701:2008 Iron ores and direct reduced iron - Determination of size distribution by sieving
• ISO 4701:2017 Iron ores and direct reduced iron - Determination of size distribution by sieving
• ISO 9276-1:1990 Representation of results of particle size analysis; part 1: graphical representation
• ISO 9328-6:2004 Steel flat products for pressure purposes - Technical delivery conditions - Part 6: Weldable fine grain steels, quenched and tempered
• ISO 16232-9:2007 Road vehicles - Cleanliness of components of fluid circuits - Part 9: Particle sizing and counting by automatic light extinction particle counter
• IEC/DIS 63086-2-1 Household and similar electrical air cleaning appliances - Methods for measuring the performance — Part 2-1: Particular requirements for determination of reduction of particles
• ISO 20290-1:2021 Aggregates for concrete - Test methods for mechanical and physical properties - Part 1: Determination of bulk density, particle density, particle mass-per-volume and water absorption
• ISO 2996:1974 Sodium tripolyphosphate and sodium pyrophosphate for industrial use; Determination of particle size distribution by mechanical sieving
• ISO 10142:1996 Carbonaceous materials for use in the production of aluminium - Calcined coke - Determination of grain stability using a laboratory vibration mill
• ISO/TR 22681:2019 Hydraulic fluid power — Impact and use of ISO 11171:2016 μm(b) and μm(c) particle size designations on particle count and filter test data
• ISO 13317-4:2014 Determination of particle size distribution by gravitational liquid sedimentation methods - Part 4: Balance method
• IEC/FDIS 63086-2-1:2023 Household and similar electrical air cleaning appliances - Methods for measuring the performance — Part 2-1: Particular requirements for determination of particle reduction
• ISO 14644-9:2012 Cleanrooms and associated controlled environments - Part 9: Classification of surface cleanliness by particle concentration

Professional Standard-Ships, Granularity use

• CB/T 3997-2008 Determination method of contaminating level by particles for marine fluid

Taiwan Provincial Standard of the People's Republic of China, Granularity use

• CNS 10943-1984 1
• CNS 1167-1995 Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or magnesium Sulfate
• CNS 13419-1994 6

Professional Standard - Electricity, Granularity use

• DL/T 432-2018 Determination method of particle size in electric power oil
• DL/T 1978-2019 Classification standard for the degree of pollution of electric power oil particles
• DL/T 432-2007 Determination of particulate contamination in oil

Defense Logistics Agency, Granularity use

• DLA MS28009 REV B VALID NOTICE 3-2005 INDICATOR - TEMPERATURE, ELECTRICAL RESISTANCE MULTI-FUNCTION, -70 TO +150 C, 2-INCH SIZE
• DLA MS28009 REV B NOTICE 2-1999 INDICATOR - TEMPERATURE, ELECTRICAL RESISTANCE MULTI-FUNCTION, -70 TO +150 C, 2-INCH SIZE
• DLA MS28009 REV B-1963 INDICATOR - TEMPERATURE, ELECTRICAL RESISTANCE MULTI-FUNCTION, -70 TO +150 C, 2-INCH SIZE
• DLA QPL-7077-14-2006 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, MULTIFUNCTION, -70 DEGREES TO +150 DEGREES C 2 INCH SIZE
• DLA MIL-DTL-49055/11 C VALID NOTICE 2-2008 Cables, Special Purpose, Electrical, Flexible, Flat, Unshielded, Round Conductor, 150 Deg. C

Standard Association of Australia （SAA）, Granularity use

• AS 1289.3.6.1:1995 Methods of testing soils for engineering purposes - Soil classification tests - Determination of the particle size distribution of a soil - Standard method of analysis by sieving
• AS 1289.6.8.1:1995 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the resilient modulus and permanent deformation of granular unbound pavement materials
• AS 1289.3.6.2:1995 Methods of testing soils for engineering purposes - Soil classification tests - Determination of the particle size distribution of a soil - Analysis by sieving in combination with hydrometer analysis (subsidiary method)
• AS 5009.2:2003 Determination of particle size distribution by centrifugal liquid sedimentation methods - Photocentrifuge method
• AS 4133.4.2:1993 Methods of testing rocks for engineering purposes - Rock strength tests - Determination of uniaxial compressive strength
• AS 1141.11.2:2008 Methods for sampling and testing aggregates - Particle size distribution for vision sizing systems

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Granularity use

• GB/T 13531.6-2018 General methods on determination of cosmetics—Determination of partical size
• GB/T 31459-2015 Safety requirements for temperature control systems for floor heating for household and similar use

VN-TCVN, Granularity use

• TCVN 5415-1991 Gear reducer for general purpose.The height of axit

North Atlantic Treaty Organization Standards Agency, Granularity use

• STANAG 3713-2008 DETERMINATION OF PARTICULATE MATTER IN AEROSPACE HYDRAULIC FLUIDS USING A PARTICLE SIZE ANALYSER

未注明发布机构, Granularity use

• BS 3625:1963(1999) Specification for Eyepiece and screen graticules — For the determination of particle size of powders
• BS ISO 13323-1:2000(2002) Determination of particle size distribution — Single - particle light interaction methods — Part 1 : Light interaction considerations
• DIN EN 471:2003 High-visibility warning clothing for professional use — Test methods and requirements

国家市场监督管理总局、中国国家标准化管理委员会, Granularity use

• GB/T 22688-2022 Pressure-type temperature controls for household and similar use
• GB/T 22687-2022 Bimetal temperature controls for household and similar use
• GB/T 37163-2018 Hydraulic fluid power—Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle

NATO - North Atlantic Treaty Organization, Granularity use

• STANAG 3713-1990 Determination of Particulate Matter in Aerospace Hydraulic Fluids Using a Particle Size Analyser (ED 3 AMD 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +

CU-NC, Granularity use

• NC 21-02-1967 Aproximate concentration reagent solutions for general use
• NC 21-03-1968 Exact concentration reagent solutions for general use

CEN - European Committee for Standardization, Granularity use

• EN ISO 8130-13:2019 Coating powders - Part 13: Particle size analysis by laser diffraction
• PD CEN/TS 15415:2006 Solid recovered fuels - Determination of particle size distribution by screen method
• EN ISO 8130-1:2019 Coating powders - Part 1: Determination of particle size distribution by sieving

KR-KS, Granularity use

• KS A 0095-2007(2022) Determination of particle size distribution by the weight of sedimentation in liquid
• KS P ISO 8871-3-2020 Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 3: Determination of released-particle count
• KS B ISO 649-1-2017 Laboratory glassware — Density hydrometers for general purposes — Part 1: Specification

GOSTR, Granularity use

• GOST R 58401.6-2019 Automobile roads of general use. Asphalt mixtures and asphalt concrete for road pavement. Method for determining the degree of coating grains of aggregate by asphalt binder
• PNST 324-2019 Automobile roads of general use. Soils. Determination of optimum moisture and maximum density by Proctor method

RO-ASRO, Granularity use

• STAS SR ISO 9477:1995 High strength cast steels for general engineering and structural purposes

Professional Standard - Electron, Granularity use

• SJ/T 10943-1996 Test method for granulometric distribution of alundum powder for vacuum tubes - Density balance method

工业和信息化部, Granularity use

• SJ/T 10943-2020 Density balance method for determination of particle size distribution of corundum powder for electric vacuum devices
• YS/T 738.5-2020 Methods for analysis of aluminum hydroxide for fillers Part 5: Determination of particle size

Professional Standard - Aviation, Granularity use

• HB 8581-2020 Hydraulic fluid power- Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light- extinction principle
• HB 5931.4-1986 Determination of Solid Particle Contamination Degree of Working Fluid Using Automatic Particle Counter for Contamination Test of Aircraft Hydraulic System

Canadian Standards Association (CSA), Granularity use

• CSA ISO 18847:2021 Solid biofuels - Determination of particle density of pellets and briquettes (Adopted ISO 18847:2016, first edition, 2016-09-01)

Military Standard of the People's Republic of China-General Armament Department, Granularity use

• GJB 380.4-1987 Aircraft hydraulic system contamination test uses automatic particle counter to determine oil solid particle contamination degree
• GJB 227.2-1989 General purpose silicone rubber compound (Shore A type hardness 35~45)
• GJB 227.3-1989 General purpose silicone rubber compound (Shore A type hardness 55~65)
• GJB 227.4-1989 General purpose silicone rubber compound (Shore A type hardness 65~75)
• GJB 380.4A-2015 Aviation Service Fluid Contamination Testing Part 4: Determination of Solid Particle Contamination by Automatic Particle Counting Method

IEC - International Electrotechnical Commission, Granularity use

• IEC 61547 INT 1:2013 EQUIPMENT FOR GENERAL LIGHTING PURPOSES – EMC IMMUNITY REQUIREMENTS (Edition 2.0)

Society of Automotive Engineers (SAE), Granularity use

• SAE J444-2005 Cast Shot and Grit Size Specifications for Peening and cleaning
• SAE J444-2012 Cast Shot and Grit Size Specifications for Peening and Cleaning
• SAE AMS2304B-2010 Steel Cleanliness, Special Aircraft-Quality Magnetic Particle Inspection Procedure
• SAE AMS3358B-1995 Silicone Potting Compound, Elastomeric Two-Part, General Purpose 80 to 180 Poise (8 to 18 Pa-s) Viscosity
• SAE AMS3361B-1995 Silicone Potting Compound, Elastomeric Two-Part, General Purpose 150 to 400 Poise (15 to 40 Pa-s) Viscosity
• SAE AMS3359B-1995 Silicone Potting Compound, Elastomeric Two-Part, General Purpose 200 to 400 Poises (20 to 40 Pa-s) Viscosity
• SAE AMS3361C-2012 Silicone Potting Compound, Elastomeric, Two-Part, General Purpose, 140 to 400 Poise (15 to 40 Pa˙s) Viscosity
• SAE AMS3358C-2012 Silicone Potting Compound, Elastomeric, Two-Part General Purpose, 80 to 180 Poise (8 to 18 Pa˙s) Viscosity

Professional Standard - Business, Granularity use

• SB/T 10425-2007 Criterion on measurement of satisfaction in household and similar electronic and electrical appliance service

Malaysia Standards, Granularity use

• MS 1478-1999 Specification for low-density polyethylene films for general use and packaging applications

国家能源局, Granularity use

• NB/T 10776-2021 Low ambient temperature air source heat pump water heaters for domestic and similar purposes
• NB/T 10777-2021 Low ambient temperature air source heat pump water heaters for commercial or industrial use and similar purposes

SE-SIS, Granularity use

• SIS SS-ISO 898-1:1991 Bolts, screws and studs - Nominal lengths, and thread lengths for general purpose bolts
• SIS SS-ISO 888:1986 Bolts, screws and studs - Nominal lengths, and thread lengths for general purpose bolts
• SIS SS-ISO 898/2:1985 Bolts, screws and studs - Nominal lengths, and thread lengths for general purpose bolts

Association of German Mechanical Engineers, Granularity use

• VDI 3786 Blatt 10-1994 Environmental meteorology; measurement of the atmospheric turbidity due to aerosol particles with sunphotometers

ESDU - Engineering Sciences Data Unit, Granularity use

• ESDU 09016-2013 Use of local-flow conditions for calculation of roughness-particle height in transition strips on wings

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Granularity use

• GJB 380.4A-2004 Contamination test method of operating liquid for aviation Part 4:Determination of solid particle contamination level by automatic particle counting method
• GJB 6239.2-2008 Test method of impregnated activated carbon for military. Part 2: Particle size

U.S. Air Force, Granularity use

• AIR FORCE MS27999-1961 LENS, CAMERA, GENERAL PHOTOGRAPHIC, MOUNTED WIDE ANGLE-TYPE

Aerospace Industries Association/ANSI Aerospace Standards, Granularity use

• AIA/NAS NASM1312-3-1997 Fastener Test Methods; Method 3 Humidity
• AIA/NAS NASM1312-6-1997 Fastener Test Methods; Method 6 Hardness
• AIA/NAS NASM1312-18-1997 Fastener Test Methods; Method 18 Elevated Temperature Tensile Strength
• AIA/NAS NASM1312-8-2001 Fastener Test Methods; Method 8 Tensile Strength
• AIA/NAS NASM81177/1-1999 Fasteners, Blind, High Strength, Installation Formed, Alloy Steel; Design and Usage Limitations for

TH-TISI, Granularity use

• TIS 2450-2009 Bolts, screws and studs.nominal lengths, and thread lengths for general purpose bolts

(U.S.) Ford Automotive Standards, Granularity use

• FORD WSS-M6J175-A-1997 PRIMER SURFACER, 130 C BAKING TEMPERATURE, CHIP AND SCRATCH INHIBITING, REPAIR PARTS

TR-TSE, Granularity use

• TS 1945-1975 ALUMINIUM OXIDE PRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM — PARTICLE S?ZE ANALYSIS — SIEVING METHOD

PL-PKN, Granularity use

• PN E06300-15-1990 Electrical appliances for household use and similar purposes General requirements and tests procedures Mechanical strength

PH-BPS, Granularity use

• PNS ISO 21363:2021 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy

Professional Standard - Petrochemical Industry, Granularity use

• SH/T 1612.8-2005 Purified terephthalic acid for industrial use - Determination of partical size distribution - Laser diffraction method

Professional Standard - Automobile, Granularity use

• QC/T 29104-2013 Limiting value of contamination level of solid particles of special purpose vehicle hydraulic system

Others:   oil use, Packaging purpose, oxygen use, Hydrogen use, Mercury use, iso purpose, repurpose, Purpose definition, gas use, paper use, Fluorescent use, Potential use, Substance, Purpose Nozzle, Air pump use, ms purpose, Laser use, Particle size analyzer use, Granularity use, The use of particle size analyzer.