ZH
RU
ES

The use of particle size analyzer

The use of particle size analyzer, Total:498 items.

In the international standard classification, The use of particle size analyzer involves: Power stations in general, Cutting tools, Particle size analysis. Sieving, Air quality, Road engineering, Fuels, Products of the textile industry, General methods of tests and analysis for food products, Thermodynamics and temperature measurements, Iron and steel products, Domestic safety, Photography, Ferroalloys, Non-metalliferous minerals, Raw materials for rubber and plastics, Analytical chemistry, Soil quality. Pedology, Products of the chemical industry, Cinematography, Electrical accessories, Miscellaneous domestic and commercial equipment, Cereals, pulses and derived products, Earthworks. Excavations. Foundation construction. Underground works, Construction industry, Paint ingredients, Paints and varnishes, Production of metals, Testing of metals, Spices and condiments. Food additives, Inorganic chemicals, Ceramics, Measurement of fluid flow, Measurement of volume, mass, density, viscosity, Lubricants, industrial oils and related products, Optoelectronics. Laser equipment, Medical equipment, Domestic electrical appliances in general, Electronic tubes, Tobacco, tobacco products and related equipment, On-board equipment and instruments, Surface treatment and coating, Refractories, Construction materials, Linear and angular measurements, Fibre optic communications, Fluid power systems, Aerospace electric equipment and systems, Equipment for petroleum and natural gas industries, Organic chemicals, Ferrous metals, Water quality, Hydraulic fluids, Kitchen equipment, Rubber and plastics products, Non-ferrous metals, Radiation protection, Fasteners, Crude petroleum, Geology. Meteorology. Hydrology, Machine tool systems, Metalliferous minerals, Construction technology, Optics and optical measurements, Ventilators. Fans. Air-conditioners, Products of non-ferrous metals, Aircraft and space vehicles in general, Protective equipment, Automatic controls for household use, Protection against electric shock, Astronomy. Geodesy. Geography, Electrical wires and cables, Fertilizers, Physics. Chemistry, Glass, Radiation measurements, CONSTRUCTION MATERIALS AND BUILDING, Nuclear energy engineering, Electromagnetic compatibility (EMC), Protection against fire, Materials for aerospace construction, Protection against dangerous goods, Textile fibres, Special purpose vehicles, Plant and equipment for the food industry, Plastics.

YU-JUS, The use of particle size analyzer

JUS K.F0.005-1989 Gralns of fused alumiuium oxide and silicon carbide for boodod abrasivc products. Particle si?e measurement of microgrfts by Eppendorf - photosedimentometer
JUS K.F0.001-1989 Grain si7.es of fused alumlnium oxlde and sIlicon carbide for bonded abrasive products. ?esignaticm and graJn slze distribution
JUS K.F0.033-1989 GraJns of fused aluminium oxlde and sIlIcon carbide for coated abrasive producls. Grain slze analysis of microgrits P 240 to P 1200
JUS K.F0.032-1989 Grains of fused aluminium oxJde and slllcon carbide for coated abrasive products. Graln sir.e analysls of macrogrlts P 12 to P 220
JUS K.F0.002-1989 GraJns of fused aluminium oxide and silicon carbide for boodod abrasivc products. Grain si?e analysis of macrogrits F 4 to F 220
JUS K.F0.004-1989 Gralns of fused alumlnium oxide and slllccm carbide for bonded abrasive. products. Grala si?e analysis of microgrits P 230 to F 1200
JUS K.F0.006-1988 Grains of fused alumininm oxfdo and silJcon carbide for abrasivo products. DeterminatIon of the buJk densfty of tbe abraslve grains
JUS H.B8.617-1979 Aluminium oxide primarily used for the production of ahiminium. Particle si?e analysis. Sieving metho?
JUS B.E4.340-1984 Laboratorf glassmre andaccessories. Density hydrometers for generalpurposes
JUS B.E4.359-1983 Laboratory glassware and accessorias. Liquid-in~glass thermomaters for special purpotst
JUS H.M8.114-1982 Testing of accessory materials for rubber industr/. Determination of pour density of pelleted carbon black

North Atlantic Treaty Organization Standards Agency, The use of particle size analyzer

STANAG 3713-2008 DETERMINATION OF PARTICULATE MATTER IN AEROSPACE HYDRAULIC FLUIDS USING A PARTICLE SIZE ANALYSER

NATO - North Atlantic Treaty Organization, The use of particle size analyzer

STANAG 3713-1990 Determination of Particulate Matter in Aerospace Hydraulic Fluids Using a Particle Size Analyser (ED 3 AMD 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +
AFLP-3713-2014 DETERMINATION OF PARTICULATE MATTER IN AEROSPACE HYDRAULIC FLUIDS USING A PARTICLE ANALYSER (ED A@ Ver 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (

Group Standards of the People's Republic of China, The use of particle size analyzer

T/CEC 426.3-2022 General Technical Conditions for Electric Power Oil Testing Instruments Part 3: Particle Size Meter
T/SSM 5-2022 Calibration specifications for particle number concentration measuring instruments used in motor vehicle emissions
T/CAB 0147-2022 Household and similar electrical appliances-Safety-Arrangement method for heating temperature points

American National Standards Institute （ANSI), The use of particle size analyzer

ANSI B74.12-2012 Specifications for the Size of Abrasive Grain-Grinding Wheels, Polishing and General Industrial Uses
ANSI/SAE J421-1993 Cleanliness Rating of Steels by the Magnetic Particle Method
ANSI/ASTM A833:1996 Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers

British Standards Institution (BSI), The use of particle size analyzer

BS ISO 21501-1:2009 Determination of particle size distribution - Single particle light interaction methods - Light scattering aerosol spectrometer
BS EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
BS PD CEN/TR 16013-2:2010 Workplace exposure — Guide for the use of direct-reading instruments for aerosol monitoring Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
19/30396207 DC BS EN 10222-4 AMD1. Steel forgings for pressure purposes. Part 4. Weldable fine grain steels with high proof strength
PD CEN/TS 17434:2020 Ambient air. Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS)
BS ISO 21501-3:2019 Determination of particle size distribution. Single particle light interaction methods - Light extinction liquid-borne particle counter
BS EN 60320-3:2014+A2:2022 Appliance couplers for household and similar general purposes - Standard sheets and gauges
BS ISO 21501-2:2019 Determination of particle size distribution. Single particle light interaction methods - Light scattering liquid-borne particle counter
BS ISO 21501-4:2018+A1:2023 Determination of particle size distribution. Single particle light interaction methods - Light scattering airborne particle counter for clean spaces
BS ISO 9276-5:2005 Representation of results of particle size analysis - Methods of calculation relating to particle size analyses using logarithmic normal probability distribution
BS 7334-4:1992 Measuring instruments for building construction. Methods for determining accuracy in use of theodolites
BS EN 10028-3:2017 Tracked Changes. Flat products made of steels for pressure purposes. Weldable fine grain steels, normalized
BS EN ISO 8130-13:2010 Coating powders. Particle size analysis by laser diffraction
BS EN ISO 8130-13:2001 Coating powders. Particle size analysis by laser diffraction
BS DD CEN/TS 15465:2008 Cereals and cereal products - Durum wheat (T. durum Desf.) - General guidelines for instrumental methods measurement of semolina colour
BS EN 60335-2-56:2003 Specification for safety of household and similar electrical appliances - Particular requirements for projectors and similar appliances
BS EN 60335-2-56:2003+A2:2014 Household and similar electrical appliances. Safety - Particular requirements for projectors and similar appliances
BS 7334-3:1990 Measuring instruments for building construction. Methods for determining accuracy in use: optical levelling instruments
BS 3G 148:1981 Specification for general purpose platinum temperature sensors for aircraft
BS 7334-5:1992 Measuring instruments for building construction. Methods for determining accuracy in use of optical plumbing instruments
19/30385918 DC BS ISO 21501-3. Determination of particle size distribution. Single particle light interaction methods. Part 3. Light extinction liquid-borne particle counter
BS EN 10028-5:2017 Tracked Changes. Flat products made of steels for pressure purposes. Weldable fine grain steels, thermomechanically rolled
BS EN 10028-6:2017 Tracked Changes. Flat products made of steels for pressure purposes. Weldable fine grain steels, quenched and tempered
21/30419440 DC BS ISO 21501-4 AMD1. Determination of particle size distribution. Single particle light interaction methods. Part 4. Light scattering airborne particle counter for clean spaces
BS IEC 60692:1999 Nuclear instrumentation. Density gauges utilizing ionizing radiation. Definitions and test methods
19/30385915 DC BS ISO 21501-2. Determination of particle size distribution. Single particle light interaction methods. Part 2. Light scattering liquid-borne particle counter
BS 7334-6:1992 Measuring instruments for building construction - Methods for determining accuracy in use of laser instruments
BS EN 62534:2015 Radiation protection instrumentation. Highly sensitive hand-held instruments for neutron detection of radioactive material
BS EN 62533:2016 Radiation protection instrumentation. Highly sensitive hand-held instruments for photon detection of radioactive material
BS 7334-7:1992 Measuring instruments for building construction - Methods for determining accuracy in use of instruments when used for setting out
BS 7334-8:1992 Measuring instruments for building construction. Methods for determining accuracy in use of electronic distance-measuring instruments up to 150 m
BS ISO 12984:2018 Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of particle size distribution
22/30441335 DC BS EN 61547 AMD1. Equipment for general lighting purposes. EMC immunity requirements
BS EN IEC 61547:2023 Tracked Changes. Equipment for general lighting purposes. EMC immunity requirements
BS IEC 61336:1996 Nuclear instrumentation. Thickness measurement systems utilizing ionizing radiation. Definitions and test methods
BS EN 12948:2002 Liming materials - Determination of size distribution by dry and wet sieving
BS PD CEN/TR 16013-1:2010 Workplace exposure — Guide for the use of direct-reading instruments for aerosol monitoring Part 1: Choice of monitor for specific applications
PD ISO/TS 19278:2019 Plastics. Instrumented micro-indentation test for hardness measurement
BS ISO 20290-1:2021 Aggregates for concrete. Test methods for mechanical and physical properties - Determination of bulk density, particle density, particle mass-per-volume and water absorption
BS 4140-24:1987 Methods of test for aluminium oxide. Determination of fine particle size distribution (method using electroformed sieves)
BS 4044:1989 Methods for determination of fibre length by comb sorter diagram
17/30346753 DC BS ISO 9328-3. Steel flat products for pressure purposes. Technical delivery conditions. Part 3. Weldable fine grain steels, normalized

RU-GOST R, The use of particle size analyzer

GOST 32860-2014 Automobile roads of general use. Rubble and sand slag. Determination of particle size distribution
GOST 33029-2014 Automobile roads of general use. Crushed stone and gravel from rocks. Method for determination of granulometric composition
GOST 32719-2014 Automobile roads of general use. Mineral powder. Method of determination of the grain
GOST R ISO 12984-2015 Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of particle size distribution
GOST IEC 60335-2-56-2013 Safety of household and similar electrical appliances. Part 2-56. Particular requirements for projectors and similar appliances
PNST 71-2015 Automobile roads of general use. Mineral materials for preparing fine-grained asphalt concrete mixtures. Method for determination of density and absorption
PNST 78-2015 Automobile roads of general use. Mineral materials for preparing coarse-grained asphalt concrete mixtures. Method for determination of density and absorption
PNST 95-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determining the degree of coating grains of aggregate by asphalt binder
GOST 32823-2014 Automobile roads of general use. Slag sand. Determination of clay particles content (swelling method)
PNST 79-2016 Automobile roads of general use. Viscous petroleum road bitumens. The method determining of the flexural creep stiffness using the bending beam rheometer (BBR)
GOST 32717-2014 Automobile roads of general use. Crushed sand. Determination of lamellar grains (flakiness) and needle shape
PNST 75-2015 Automobile roads of general use. Mineral materials for the preparation of asphalt mixtures. The method of determining grain composition
GOST 32727-2014 Automobile roads of general use. Natural and crushed sand. Determination of particle size distribution and size of the module
GOST 32725-2014 Automobile roads of general use. Natural and crushed sand. Method for determination of dust and clay particles
GOST 32859-2014 Automobile roads of general use. Slag rubble and sand. Determination of dust and clay particles content
GOST 33055-2014 Automobile roads of general use. Crushed stone and gravel from rocks. Determination of the content of dust and clay particles
GOST 19300-1986 Instruments for measurement of surface roughness by the profile method. Contact profilographs and profilometers. Types and main parameters
GOST 32762-2014 Automobile roads of general use. Mineral powder. Method for determination of moisture
GOST R 50568.3-1993 Urea for industrial use. Determination of iron content. Photometric method with use of 2, 2' - bipyridyl
PNST 74-2015 Automobile roads of general use. Materials coarse mineral for the preparation of asphalt mixtures. The method of determining of crushed grains
GOST 32858-2014 Automobile roads of general use. Slag rubble. Determination of resistance of grain structure of slag rubble against decay
PNST 73-2015 Automobile roads of general use. Fine-grained mineral materials for preparing asphalt mixtures. Method for determination of the void volume
GOST 32764-2014 Automobile roads of general use. Mineral powder. Method for determination of medium density and porosity
GOST R 8.698-2010 State system for ensuring the uniformity of measurements. Dimensional parameters of nanoparticles and thin films. Method for measurement by means of a small angle X-ray scattering diffractometer
GOST 31247-2004 Industrial cleanliness. Determination of fluid sample contamination using automatic particle counter
GOST 32708-2014 Automobile roads of general use. Natural and crushed sand. Method for determination of clay particles by swelling
GOST 32861-2014 Automobile roads of general use. Rubble and sand slag. Determination of content of weak grains and metal impurities
GOST 25699.16-1990 Carbon black for rubber industry. Method for determination of individual pellet crushing strength
GOST 32822-2014 Automobile roads of general use. Slag rubble and sand. Determination of bulk density and voidness
GOST 33051-2014 Automobile roads of general use. Crushed stone and gravel from rocks. Determination of crushed particles in the gravel rubble and gravel
GOST 32763-2014 Automobile roads of general use. Mineral powder. The method of determining the true density
GOST 32721-2014 Automobile roads of general use. Natural and crushed sand. Determination of bulk density and emptiness
GOST 32821-2014 Automobile roads of general use. Rubble and sand slag. The definition of true density and porosity
GOST 32864-2014 Automobile roads of general use. Slag rubble. Determination of grains of lamellar (flakiness) and needle shaped forms content
PNST 9-2012 Automobile roads of general use. Viscous petroleum road bitumens. Determination of solubility
PNST 3-2012 Automobile roads of general use. Viscous petroleum road bitumens. Determination of needle penetration
PNST 76-2015 Automobile roads of general use. The mineral materials for the preparation of asphalt mixtures. The method of determining the content of silt particles by washing
GOST 32729-2014 Automobile roads of general use. The method of measuring elastic deflection to determine the strength of non-rigid pavement

American Society for Testing and Materials (ASTM), The use of particle size analyzer

ASTM D8049-17 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM D8049-16 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM E1458-92 Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
ASTM E2056-00 Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM D7928-21 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
ASTM D7928-16e1 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
ASTM D7928-21e1 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
ASTM D7928-17 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
ASTM D6913-04 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913-04e1 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913-04(2009) Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM E1458-12(2022) Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
ASTM D8392-22 Standard Practice for Calibration and Verification of Direct Imaging Analyzers Used for Particle Size and Shape Analysis of Catalytic Materials
ASTM D8200-22 Standard Practice for Creating a Correlation to Compare Particle Size Distribution Results of Proppants by Dynamic Imaging Analyzers and Sieves
ASTM F660-83(2002)e1 Standard Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters
ASTM F660-83(2007) Standard Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters
ASTM F660-83(2013) Standard Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters
ASTM D8049-16a Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM D7596-23 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
ASTM D8184-18 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
ASTM D8184-18e1 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
ASTM F1226-89(1994)e1 Standard Test Method for Calibration of Liquid-Borne Particle Counters for Submicrometer Particle Sizing (Withdrawn 2002)
ASTM E1772-95 Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
ASTM E1772-95(2001) Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
ASTM C357-07 Standard Test Method for Bulk Density of Granular Refractory Materials
ASTM D448-03 Standard Classification for Sizes of Aggregate for Road and Bridge Construction
ASTM D448-03a Standard Classification for Sizes of Aggregate for Road and Bridge Construction
ASTM D448-08 Standard Classification for Sizes of Aggregate for Road and Bridge Construction
ASTM D448-12 Standard Classification for Sizes of Aggregate for Road and Bridge Construction
ASTM D8489-23 Test Method for Determination of Microplastics Particle and Fiber Size, Distribution, Shape, and Concentration in Waters with High to Low Suspended Solids Using a Dynamic Image Particle Size and Shape
ASTM D4016-08 Standard Test Method for Viscosity of Chemical Grouts by Brookfield Viscometer (Laboratory Method)
ASTM D7619-10 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D2728-98(2019) Standard Practice for Paving Uses and Application Temperatures for Road Tars
ASTM D7596-14 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
ASTM D2977-03 Standard Test Method for Particle Size Range of Peat Materials for Horticultural Purposes
ASTM D7690-11 Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography
ASTM D8489-23e1 Standard Test Method for Determination of Microplastics Particle and Fiber Size, Distribution, Shape, and Concentration in Waters with High to Low Suspended Solids Using a Dynamic Image Particle Size
ASTM D7596-10 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
ASTM B647-84(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM D5002-13 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-16 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM E382-07 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
ASTM F328-98 Standard Practice for Calibration of an Airborne Particle Counter Using Monodisperse Spherical Particles
ASTM D5002-99 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-15 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-99(2005) Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM D5002-99(2010) Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
ASTM E2980-20 Standard Test Methods for Estimating Average Particle Size of Powders Using Air Permeability
ASTM B609/B609M-12e1 Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
ASTM B609/B609M-99(2010) Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
ASTM B609/B609M-12(2016) Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
ASTM E1458-92(2001) Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
ASTM F1708-96 Standard Practice for Evaluation of Granular Polysilicon by Meter-Zoner Spectroscopies
ASTM E1458-12(2016) Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
ASTM E3040-18 Standard Practice for Evaluation of Instrumental Color Difference with a Gray Scale
ASTM D8049-19a Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer
ASTM D8049-19 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer
ASTM D8049-21 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer
ASTM B624-99 Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application
ASTM E2980-15 Standard Test Methods for Estimating Average Particle Size of Powders Using Air Permeability
ASTM E799-92(1998) Standard Practice for Determining Data Criteria and Processing for Liquid Drop Size Analysis
ASTM F50-21 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
ASTM C729-05 Standard Test Method for Density of Glass by the Sink-Float Comparator
ASTM E3040-15 Standard Test Method for Evaluation of Instrumental Color Difference with a Gray Scale
ASTM E2297-04(2010) Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods
ASTM D4166-99 Standard Test Method for Measurement of Thickness of Nonmagnetic Materials by Means of a Digital Magnetic Intensity Instrument
ASTM A833-08a(2014) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM E1458-12 Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
ASTM D6913-04e2 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913/D6913M-17 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D7417-17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
ASTM D7417-10 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)

Association Francaise de Normalisation, The use of particle size analyzer

NF A36-620-4*NF EN 10222-4+A1:2021 Steel forgings for pressure purposes - Part 4 : weldable fine grain steels with high proof strength
NF A36-620-4/IN1*NF EN 10222-4/IN1:2021 Steel forgings for pressure purposes - Part 4 : weldable fine grain steels with high proof strength
NF X11-681:1982 Particle size analysis. Particle size analysis by gravity sedimentation. Pipette method.
NF EN 10222-4+A1:2021 Pièces forgées en acier pour appareils à pression - Partie 4 : aciers soudables à grains fins avec limite d'élasticité élevée
NF EN 10222-4/IN1:2021 Pièces forgées en acier pour appareils à pression - Partie 4 : aciers soudables à grains fins avec limite d'élasticité élevée
XP X43-174*XP CEN/TS 17434:2020 Ambient air - Determination of the particle size spectra of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS)
NF X11-670:1989 Particle size analysis in an electrolytic suspension using a resistance variation counter.
NF X43-276*NF EN 481:1993 Workplace atmospheres. Size fraction definitions for measurement of airborne particles.
FD X43-711-2*FD CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2 : evaluating airborne particle concentrations using Optical Particle Counters
FD CEN/TR 16013-2:2010 Exposition au poste de travail - Guide d'utilisation des instruments à lecture directe pour la surveillance des aérosols - Partie 2 : évaluation des concentrations de particules en suspension dans l'air à l'aide de compteurs optiques de particules
XP CEN/TS 17434:2020 Air ambiant - Détermination de la distribution granulométrique de particules d'un aérosol atmosphérique à l'aide d'un spectromètre de granulométrie à mobilité électrique (MPSS)
NF P94-040:1993 Soils : investigation and testing. Practical method for identifying the 0/50 mm fraction of a granular material. Determination of particle size and blue value.
NF A36-205-3:2009 Flat products made of steels for pressure purposes - Part 3 : weldable fine grain steels, normalized.
FD CEN/TR 16013-3:2012 Exposition au poste de travail - Guide d'utilisation des instruments à lecture directe pour la surveillance des aérosols - Partie 3 : évaluation des concentrations de particules en suspension dans l'air à l'aide de photomètres
NF T30-044:1968 Paints. Determination of the particle size distribution of paint fillers by the ANDREASEN pipette method.
FD X43-711-3*FD CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3 : evaluation of airborne particle concentrations using photometers
NF B35-507:1983 Laboratory glassware. Enclosed-scale general purpose thermometers.
NF C73-832*NF EN 60335-2-32:2005 Household and similar electrical appliances - Safety - Part 2-32 : particular requirements for massage appliances
NF V37-001:2000 Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.
NF X34-214-1*NF EN 15415-1:2011 Solid recovered fuels - Determination of particle size distribution - Part 1 : screen method for small dimension particles
NF EN 15234-6:2012 Biocombustibles solides - Assurance qualité du combustible - Partie 6 : granulés non ligneux à usage non industriel
NF X34-214-3*NF EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3 : method by image analysis for large dimension particles
NF C73-856:1992 SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES. PART 2 : PARTICULAR REQUIREMENTS FOR PROJECTORS AND SIMILAR APPLIANCES. (EUROPEAN STANDARD EN 60 335-2-56).
NF C73-856*NF EN 60335-2-56:2004 Household and similar electrical appliances - Safety - Part 2-56 : particular requirements for projectors and similar appliances
NF T30-499-13:2011 Coating powders - Part 13 : particle size analysis by laser diffraction.
NF EN 12830:2018 Enregistreurs de température pour le transport, le stockage et la distribution des marchandises thermosensibles - Essais, performance, aptitude à l'emploi
NF A36-620-4/A1:2002 Steel forgings for pressure purposes - Part 4 : weldable fine grain steels with high proof strength.
NF EN 16450:2017 Air ambiant - Systèmes automatisés de mesurage de la concentration de matière particulaire (PM10;PM2,5)
NF C19-534*NF EN 62534:2016 Radiation protection instrumentation - Highly sensitive hand-held instruments for neutron detection of radioactive material
NF C19-533*NF EN 62533:2016 Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material
NF EN 62534:2016 Instrumentation pour la radioprotection - Instruments portables de haute sensibilité pour la détection neutronique de matières radioactives
NF EN 62533:2016 Instrumentation pour la radioprotection - Instruments portables de haute sensibilité pour la détection photonique de matières radioactives
NF E18-150*NF EN 12830:2018 Temperature recorders for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability
NF EN IEC 62020-1:2021 Petit appareillage électrique - Contrôleurs d'isolement à courant différentiel résiduel (RCM) Partie 1 : RCM pour usages domestiques et analogues

U.S. Military Regulations and Norms, The use of particle size analyzer

ARMY P-D-245 F (1)-1991 DETERGENT, GENERAL PURPOSE, LAUNDRY AND HAND DISHWASHING (GRANULAR)
ARMY P-D-245 F-1990 DETERGENT, GENERAL PURPOSE, LAUNDRY AND HAND DISHWASHING (GRANULAR)

German Institute for Standardization, The use of particle size analyzer

DIN 33899-3:2014 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
DIN EN 10222-4/A1:2019 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength; German and English version EN 10222-4:2017/prA1:2019
DIN 33899-1:2014 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 1: Choice of monitor for specific applications
DIN 33899-2:2014 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
DIN 66119:2016 Particle size analysis - Size analysis by air classification with gravitation-counterflow elutriator
DIN 66119:1983 Particle size analysis; size analysis by air classification with gravitation-counterflow elutriator
DIN CEN/TS 17434:2020-06 Ambient air - Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS); German version CEN/TS 17434:2020
DIN 33899-2:2014-02 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
DIN 33899-3:2014-09 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
DIN CEN/TS 15465:2008 Cereals and cereal products - Durum wheat (T. durum Desf.) - General guidelines for instrumental methods measurement of semolina colour; German version CEN/TS 15465:2008
DIN 58395:1976 Temperature ranges for lubricants for optical instruments
DIN 58543:1987 Spring bow divider for school drawing instruments
DIN 2271-2:1976 Pneumatic Length Measurement (Air Gauging); Design Features of Instruments Working in the High Pressure Range
DIN 18723-6:1990 Field procedure for precision testing of surveying instruments; electro-optical distance measuring instruments for short ranges
DIN IEC 61336:1999-05 Nuclear instrumentation - Thickness measurement systems utilizing ionizing radiation - Definitions and test methods (IEC 61336:1996)
DIN EN 60335-2-56:2009 Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances (IEC 60335-2-56:2002 + A1:2008); German version EN 60335-2-56:2003 + A1:2008
DIN 50933:2015 Measurement of coating thicknesses - Measurement of the thickness of coatings by difference measurement using a stylus instrument
DIN EN 12830:2018 Temperature recorders for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, The use of particle size analyzer

GB/T 34790-2017 Inspenction of grain and oils—Determination of water activity of grains—Instrumental method
GB/T 13531.6-2018 General methods on determination of cosmetics—Determination of partical size
GB/T 31459-2015 Safety requirements for temperature control systems for floor heating for household and similar use

Japanese Industrial Standards Committee (JISC), The use of particle size analyzer

JIS B 7411-1:2014 Glass thermometers for general -- Part 1: General measuring instruments
JIS B 7411-2:2014 Glass thermometers for general -- Part 2: Measuring instruments used in transaction or certification
JIS G 1641:1985 Methods of sampling for size analysis of ferroalloys and size determination
JIS R 6011:1991 Testing method for grain size of coated abrasive macrogrits (P12-P220)
JIS R 6010:1991 Coated abrasive grain sizes
JIS R 6012:1991 Testing method for grain size of coated abrasive microgrits (P240-P1200)
JIS K 6219-4:2006 Carbon black for rubber industry -- Characteristics of pelletized carbon black -- Part 4: Determination of pellet size distribution
JIS H 7805:2005 Method for crystallite size determination in metal catalysts by X-ray diffractometry
JIS R 1619:1995 Testing method for size distribution of fine ceramic particles by liquid photosedimentation method
JIS B 7612-1:2008 Load Cells for Weighing Instruments -- Part 1: Analog Load Cells
JIS C 6182:1991 Test methods of optical power meters for laser beam
JIS C 9335-2-211:2007 Safety of household and similar electrical appliances -- Part 2-211: Particular requirements for heat therapy apparatus for home use
JIS C 9335-2-209:2007 Safety of household and similar electrical appliances -- Part 2-209: Particular requirements for electric therapy apparatus for home use
JIS C 6184:1993 Test methods of optical power meters for optical fiber
JIS C 9335-2-211:2004 Safety of household and similar electrical appliances -- Part 2-211: Particular requirements for heat therapy apparatus for home use
JIS C 9335-2-209:2009 Safety of household and similar electrical appliances -- Part 2-209: Particular requirements for electric therapy apparatus for home use
JIS K 6219-3:2006 Carbon black for rubber industry -- Characteristics of pelletized carbon black -- Part 3: Determination of individual pellet crushing strength
JIS C 9335-2-209:2004 Safety of household and similar electrical appliances -- Part 2-209: Particular requirements for electric therapy apparatus for home use
JIS C 9335-2-210:2007 Safety of household and similar electrical appliances -- Part 2-210: Particular requirements for electromagnetic induction therapy apparatus for home use
JIS C 9335-2-210:2018 Household and similar electrical appliances -- Safety -- Part 2-210: Particular requirements for electromagnetic induction therapy apparatus for home use
JIS B 1009:1991 Bolts, screws and studs -- Nominal lengths, and thread lengths for general purpose bolts
JIS C 9335-2-211 AMD 1:2006 Safety of household and similar electrical appliances -- Part 2-211: Particular requirements for heat therapy apparatus for home use (Amendment1)
JIS R 1622:1995 General rules for the sample preparation of particle size analysis of fine ceramic raw powder
JIS C 9335-2-210:2004 Safety of household and similar electrical appliances -- Part 2-210: Particular requirements for magnetic induction therapy apparatus for home use
JIS C 9335-2-209 AMD 1:2006 Safety of household and similar electrical appliances -- Part 2-209: Particular requirements for electric therapy apparatus for home use (Amendment 1)
JIS C 9335-2-56:2005 Household and similar electrical appliances -- Safety -- Part 2-56: Particular requirements for projectors and similar appliances
JIS C 9335-2-210 AMD 1:2006 Safety of household and similar electrical appliances -- Part 2-210: Particular requirements for magnetic induction therapy apparatus for home use (Amendment 1)
JIS C 9335-2-56:2000 Safety of household and similar electrical appliances -- Part 2-56: Particular requirements for projectors and similar appliances

Association of German Mechanical Engineers, The use of particle size analyzer

VDI 3867 Blatt 5-2013 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Time-of-flight spectrometer
VDI 3867 Blatt 4-2011 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Optical aerosol spectrometer
VDI 3867 Blatt 3-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical mobility spectrometer
VDI 3786 Blatt 10-1994 Environmental meteorology; measurement of the atmospheric turbidity due to aerosol particles with sunphotometers

Korean Agency for Technology and Standards (KATS), The use of particle size analyzer

KS C 1611-1982(2017) Electronic Self-Balancing Recorders for Industrial Use
KS C IEC 60335-2-56-2013(2018) Household and similar electrical appliances－Safety－Part 2-56：Particular requirements for projectors and similar appliances
KS M ISO 15825:2007 Rubber compounding ingredients－Carbon black－Determination of aggregate size distribution by disc centrifuge photosedimentometry
KS M ISO 15825:2017 Rubber compounding ingredients－Carbon black－Determination of aggregate size distribution by disc centrifuge photosedimentometry
KS D ISO 9327-4:2003 Steel forgings and rolled or forged bars for pressure purposes-Technical delivery conditions-Part 4:Weldable fine grain steels with high proof strength
KS B 0501-2021 Instruments for the measurement of surface roughness by the stylus method
KS B 0506-2016(2021) Instruments for the Measurement of Surface Roughness by the Interferometric Method
KS P ISO 8871-3:2020 Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 3: Determination of released-particle count
KS M ISO 12984:2004 Carbonaceous materials used in the production of aluminium－Calcined coke－Determination of particle size distribution
KS M ISO 12984-2004(2019) Carbonaceous materials used in the production of aluminium－Calcined coke－Determination of particle size distribution
KS K ISO 13982-1-2012(2017) Protective clothing for use against solid particulates－Part 1：Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates(type 5
KS C IEC 60335-2-56:2004 Household and similar electrical appliances-Safety-Part 2-56:Particular requirements for projectors and similar appliances
KS C IEC 60335-2-56:2013 Household and similar electrical appliances-Safety-Part 2-56:Particular requirements for projectors and similar appliances
KS M ISO 2926:2010 Aluminium oxide primarily used for the production of aluminium-Particle size analysis for the range 45μm to 150μm - Method using electroformed sieves
KS L 1614-2001(2016) Determination of particle size distributions for fine ceramic raw powders by laser diffraction method
KS C IEC 60730-2-13:2002 Automatic electrical controls for household and similar use－Part 2：Particular requirements for humidity sensing controls
KS L 1614-2001(2021) Determination of particle size distributions for fine ceramic raw powders by laser diffraction method
KS I ISO 28439:2013 Workplace atmospheres ― Characterization of ultrafine aerosols/ nanoaerosols ― Determination of the size distribution and number concentration using differential electrical mobility analysing systems

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., The use of particle size analyzer

ASHRAE CI-01-1-2-2001 Measurement of Two-Dimensional Air Velocities in a Full-Scale Room Using Particle Image Velocimetry
ASHRAE HI-02-19-2-2002 Development of a Particle Image Velocimetry for Measuring Air Velocity in Large-Scale Room Airflow Applications (RP-978)

Danish Standards Foundation, The use of particle size analyzer

DS/EN 10222-4+A1:2002 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
DS/CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
DS/EN 60335-2-56/A1:2008 Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances
DS/EN 60335-2-56:2003 Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances
DS/CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
DS/ISO 21501-4:2007 Determination of particle size distribution - Single particle light interaction methods - Part 4: Light scattering airborne particle counter for clean spaces
DS/ISO 1880:1981 Instruments for the measurement of surface roughness by the profile method. Contact (stylus) instruments of progressive profile transformation. Profile recording instruments
DS/ISO 3274:1981 Instruments for the measurement of surface roughness by the profile method. Contact (stylus) instruments of consecutive profile transformation. Contact profile meters, system M

Lithuanian Standards Office , The use of particle size analyzer

LST EN 10222-4-2000 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
LST EN 10222-4-2000/A1-2003 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
LST EN 10222-4+A1-2021 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
LST 1360.7-1995 Soils for road construction. Testing methods. Determination density of solid particles

IT-UNI, The use of particle size analyzer

UNI EN 10222-4-2021 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
UNI 6887-1971
UNI 6886-1971
UNI 6885-1971

AENOR, The use of particle size analyzer

UNE-EN 10222-4:2017 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
UNE-EN 60335-2-56:2005 Household and similar electrical appliances - Safety -- Part 2-56: Particular requirements for projectors and similar appliances
UNE-EN 60335-2-56:2005/A1:2008 Household and similar electrical appliances - Safety -- Part 2-56: Particular requirements for projectors and similar appliances
UNE-EN 60335-2-56:2005/A2:2014 Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances
UNE 7138:1958 GRANULOMETRIC AND CHEMICAL ANALYSIS OF CALCIUM CHLORIDE USED AS AN ADDUCT OF CONCRETES.
UNE 82303:1991 INSTRUMENTS FOR THE MEASUREMENT OF SURFACE ROUGHNESS BY THE PROFILE METHOD. VOCABULARY
UNE 34232:1981 SODIUM CHLORIDE USED AS TABLE SALT. DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY MECHANICAL SIEVING.
UNE 103900:2013 In situ determination of density and moisture content of soil and granular materials by nuclear methods: low depths.
UNE 82500:1997 EX/1M EX TEMPERATURA RECORDERS FOR THE TRANSPORT, STORAGE AND DISTRIBUTION OF FROZEN AND DEEP-FROZEN PRODUCTS.

ES-UNE, The use of particle size analyzer

UNE-EN 10222-4:2017+A1:2022 Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
UNE-CEN/TS 17434:2020 Ambient air - Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS) (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN 62534:2015 Radiation protection instrumentation - Highly sensitive hand-held instruments for neutron detection of radioactive material (Endorsed by AENOR in January of 2016.)
UNE-EN 62533:2016 Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material (Endorsed by AENOR in April of 2016.)

BE-NBN, The use of particle size analyzer

NBN-ISO 2066:1992 Expanded pure agglomerated cork. Determination of moisture content
NBN T 03-426-1988 Aluminium oxide primarily used for the production of aluminium - Determination of the fine particle size distribution (less than 60 u.m) - Method using electroformed sieves
NBN-EN 60335-2-27-1993 Safety of household and similar electrical appliances Part 2 : Particular requirements for ultra-violet and infra-red radiation skin treatment appliances for household and similar use
NBN-EN 60335-2-27-1994 Safety of household and similar electrical appliances. Part 2: Particular requirements for ultra-violet and infra-red radiation skin treatment appliances for household and similar use
NBN E 62-001-1973
NBN-ISO 8322-4:1992 Building construction - Measuring instruments - Procedures for determining accuracy in use - Part 4 : Theodolites
NBN-ISO 8322-6:1992 Building construction - Measuring instruments - Procedures for determining accuracy in use - Part 6 : Laser instruments
NBN-ISO 8322-8:1992 Building construction - Measuring instruments - Procedures for determining accuracy in use - Part 8 : Electronic distance-measuring instruments up to 150 m

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, The use of particle size analyzer

GB 4706.43-1999 Safety of household and similar electrical appliances Particular requirements for projectors and similar appliances
GB 4706.43-2005 Household and similar electrical appliances.Safety.Particular requirements for projectors and similar appliances
GB/T 9258.2-2000 Coated abrasives-Grain size analysis-Part 2: Determination of grain size distribution of macrogrits P12 to P220
GB/T 9258.2-2008 Coated abrasives.Grain size analysis.Part 2:Determination of grain size distribution of macrogrits P12 to P220
GB/T 15057.11-1994 Limestone for chemical industry- Determination of size
GB/T 14853.6-2002 Rubber compounding ingredients--Carbon black,pelletized--Determination of individual pellet crushing trength
GB/T 26647.1-2011 Determination of particle size distribution.Single-particle light interaction methods.Part 1:Light interaction considerations
GB/T 9258.3-2000 Coated abrasives-Grain size analysis-Part 3: Determination of grain size distribution of microgrits P240 to P2500
GB/T 9258.3-2017 Coated abrasives.Grain size analysis.Part 3:Determination of grain size distribution of microgrits P240 to P2 500
GB/T 14853.6-2013 Rubber compounding ingredients.Pelletized carbon black.Part 6:Determination of individual pellet crushing strength
GB/T 14853.4-2002 Rubber compounding ingredients--Carbon black,pelletized--Determination of mass strength
GB/T 14853.1-2002 Rubber compounding ingredients--Carbon black,pelletized--Determination of pour density
GB/T 25266-2010 Paints.Determination of the particle size distribution of paint fillers by the ANDREASEN pipette method
GB/T 13025.1-1991 General test method in salt industry--Determination of grain size
GB/T 13025.1-2012 General test method in salt industry.Determination of grain size
GB/T 15445.5-2011 Representation of results of particle size analysis.Part 5:Methods of calculations relating to particle size analyses using logarithmic normal probability distribution
GB/T 2481.1-1998 Bonded abrasives--Determination and designation of grain size distribution--Part 1: Macrogrits F4 to F220
GB/T 14853.4-2013 Rubber compounding ingredients.Pelletized carbon black.Part 4:Determination of mass strength
GB/T 14853.1-2013 Rubber compounding ingredients.Pelletized carbon black.Part 1:Determination of pour density
GB 31459-2015 Safety requirements for temperature control systems for floor heating for household and similar use
GB/T 21756-2008 Chemical products for industrial use.Determination of relative temperature of spontaneous flammable of solids

ES-AENOR, The use of particle size analyzer

European Committee for Standardization (CEN), The use of particle size analyzer

PD CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
PD CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
CEN/TR 16013-2:2010 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters
PD CEN/TS 15465:2008 Cereals and cereal products - Durum wheat (T. durum Desf.) - General guidelines for instrumental methods measurement of semolina colour
CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
EN 481:1993 Workplace atmospheres; size fraction definitions for measurement of airborne particles
EN ISO 8130-13:2010 Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2001)
EN 10028-6:2009 Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
EN 10028-6:1996 Flat Products Made of Steels for Pressure Purposes - Part 6: Weldable Fine Grain Steels, Quenched and Tempered
EN 10028-6:2017 Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels@ quenched and tempered
prEN 591-1991 In-vitro diagnostic systems; requirements for user manual of in-vitro diagnostic instruments for professional use
EN ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer (ISO 7759:2010)
EN 10273:2007 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
EN 10273:2000 Hot Rolled Weldable Steel Bars for Pressure Purposes with Specified Elevated Temperature Properties
EN 10273:2016 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
EN 13182:2002 Ventilation for buildings - Instrumentation requirements for air velocity measurements in ventilated spaces
EN 12830:2018 Temperature recorders for the transport@ storage and distribution of temperature sensitive goods - Tests@ performance@ suitability

United States Navy, The use of particle size analyzer

NAVY MIL-M-23167 B (1)-1978 METER, FREQUENCY, EXPANDED SCALE SWITCHBOARD TYPE (NAVAL SWITCHBOARD USE)
NAVY MIL-M-23167 B-1969 METER, FREQUENCY, EXPANDED SCALE SWITCHBOARD TYPE (NAVAL SWITCHBOARD USE)
NAVY A-A-59155 VALID NOTICE 1-2008 Nitrogen, High Purity, Special Purpose
NAVY MS91662-1969 STORAGE/CARRYING CASE FOR ANIMATED TRANSPARENCY

Indonesia Standards, The use of particle size analyzer

SNI 13-6580-2001 Test methods for particle size distribution of peat materials for horticultural purposes
SNI 05-4533-1998 Instruments for the measurement of surface roughness by the profile method- Contact (stylus) instrumens of progressive profile transformation - Profile recording instrument

CZ-CSN, The use of particle size analyzer

CSN 44 1324-1985 Determination of the bulk density of coal for special purposes
CSN 44 1324-1963 Determination of ?he bulk density of coal for special purposes
CSN 65 1025 Cast.11-1989 Sulphuric acid for industrial use. pectrophotometric method for the etermination of iron
CSN ISO 1879:1993 Instruments for the measurement of surface roughness by the profile method. Terminology
CSN EN 60335-2-15-2005
CSN ISO 1880:1993 Instruments for the measurement of surface roughness by the profile method. Contact (stylus) instruments of progressive profile transformation. Profile recording instruments
CSN 65 1025 Cast.10-1989 Sulphuric acid for industrial use. pectrophotometric method for the etermination of total nitrogen xides
CSN ISO 3274:1994 Instruments for the measurement of surface roughness by the profile method.Contact(stylus)instruments of consecutive profile transformation.Contact profile meters,system M
CSN 25 0260-1967 Verification of standardized blocks to be_ used for Rockwell B, C & A settle hardness testing machines
CSN 25 0271-1974 Calibration of standardized' blocks to be used for Rpckwell superficial N and T ?cale hardness testing machines

IN-BIS, The use of particle size analyzer

AT-ON, The use of particle size analyzer

ONORM EN 10028-3-1993 Fiat products made of steels for pressure purposes -Part 3: Weldable fine grain steels, normalized
ONORM B 3683-1991 Technical asphalts for road construction and related purposes — Determination of bulk density

Standard Association of Australia （SAA）, The use of particle size analyzer

AS 3181:1995 Approval and test specification-- electrically operated projectors for household and similar use
AS 1289.6.3.2:1997 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the penetration resistance of a soil - 9kg dynamic cone penetrometer test
AS 1289.5.8.6:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Assigned density of a Type B standard density block
AS 1289.3.6.1:1995 Methods of testing soils for engineering purposes - Soil classification tests - Determination of the particle size distribution of a soil - Standard method of analysis by sieving
AS 1289.5.8.5:1998 Methods of testing soils for engineering purposes - Soils compaction and density tests - Nuclear surface moisture-density gauges - Density of a Type A or Type C standard density block
AS 1289.6.8.1:1995 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the resilient modulus and permanent deformation of granular unbound pavement materials
AS 1289.5.8.8:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using proportion of water
AS 1289.6.3.3:1997 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the penetration resistance of a soil - Perth sand penetrometer test
AS 1289.5.8.7:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using hydrogen content of components
AS 1289.5.8.4:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Calibration using standard blocks
AS 1289.5.8.9:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using comparison against primary blocks
AS 1289.3.6.2:1995 Methods of testing soils for engineering purposes - Soil classification tests - Determination of the particle size distribution of a soil - Analysis by sieving in combination with hydrometer analysis (subsidiary method)
AS 4133.4.2:1993 Methods of testing rocks for engineering purposes - Rock strength tests - Determination of uniaxial compressive strength
AS 1141.11.2:2008 Methods for sampling and testing aggregates - Particle size distribution for vision sizing systems
AS/NZS 60320.3:2023 Appliance couplers for household and similar general purposes, Part 3: Standard sheets and gauges (IEC 60320-3:2014 (ED. 1.2) MOD)

VN-TCVN, The use of particle size analyzer

TCVN 5699-2-56-2007 Household and similar electrical appliances.Safety.Part 2-56: Particular requirements for projectors and similar appliances

International Organization for Standardization (ISO), The use of particle size analyzer

ISO 15825:2015 Rubber compounding ingredients - Carbon black - Determination of aggregate size distribution by disc centrifuge photosedimentometry
ISO 15825:2004 Rubber compounding ingredients - Carbon black - Determination of aggregate size distribution by disc centrifuge photosedimentometry
ISO 15825:2017 Rubber compounding ingredients - Carbon black - Determination of aggregate size distribution by disc centrifuge photosedimentometry
ISO 9327-4:1999 Steel forgings and rolled or forged bars for pressure purposes - Technical delivery conditions - Part 4: Weldable fine grain steels with high proof strength
ISO 21501-3:2019 Determination of particle size distribution — Single particle light interaction methods — Part 3: Light extinction liquid-borne particle counter
ISO 21501-2:2019 Determination of particle size distribution — Single particle light interaction methods — Part 2: Light scattering liquid-borne particle counter
ISO 9276-5:2005 Representation of results of particle size analysis - Part 5: Methods of calculation relating to particle size analyses using logarithmic normal probability distribution
ISO 7759:1983 Anodizing of aluminium and its alloys; Measurement of reflectivity characteristics of aluminium surfaces using abridged goniophotometer or goniophotometer
ISO 7759:2010 Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
ISO 12984:2000 Carbonaceous materials used in the production of aluminium - Calcined coke - Determination of particle size distribution
ISO 5915:1980 Sodium hexafluorosilicate for industrial use; Determination of particle size distribution; Sieving method
ISO 2926:1974 Aluminium oxide primarily used for the production of aluminium; Particle size analysis; Sieving method
ISO 12984:2018 Carbonaceous materials used in the production of aluminium - Calcined coke - Determination of particle size distribution
ISO 8130-13:2001 Coating powders - Part 13: Particle size analysis by laser diffraction
ISO 9276-1:1990 Representation of results of particle size analysis; part 1: graphical representation
ISO 8322-7:1991 Building construction; measuring instruments; procedures for determining accuracy in use; part 7: instruments when used for setting out
ISO 8322-4:1991 Building construction — Measuring instruments — Procedures for determining accuracy in use — Part 4: Theodolites
ISO 4288:1985 Rules and procedures for the measurement of surface roughness using stylus instruments
ISO 9328-6:2004 Steel flat products for pressure purposes - Technical delivery conditions - Part 6: Weldable fine grain steels, quenched and tempered
ISO 8322-6:1991 Building construction; measuring instruments; procedures for determining accuracy in use; part 6: laser instruments
ISO 20290-1:2021 Aggregates for concrete - Test methods for mechanical and physical properties - Part 1: Determination of bulk density, particle density, particle mass-per-volume and water absorption
ISO 8322-5:1991 Building construction; measuring instruments; procedures for determining accuracy in use; part 5: optical plumbing instruments
ISO/TS 19278:2019 Plastics — Instrumented micro-indentation test for hardness measurement

Professional Standard - Energy, The use of particle size analyzer

NB/SH/T 6017-2020 Test Method for Automatic Particle Counting and Particle Shape Classification of Oil Using a Direct Imaging Synthetic Test Apparatus
NB/SH/T 0940-2016 Test method for the analysis of in-use lubricants using a specific 4-in-1 tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity and Laser Particle Counter)

International Electrotechnical Commission (IEC), The use of particle size analyzer

IEC 60335-2-56:2002/AMD2:2014 Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances
IEC 60335-2-56:2014 Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances
IEC 60335-2-56:2002/AMD1:2008 Amendment 1 - Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances
IEC 60320-3:2014 Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges
IEC 60320-3:2018 Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges
IEC 60320-3:2014/AMD1:2018 Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges; Amendment 1
IEC 60335-2-56:2002 Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances
IEC 60335-2-56:2003 Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances
IEC 60335-2-56:2002+AMD1:2008 CSV Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances
IEC 60335-2-56:2002+AMD1:2008+AMD2:2014 CSV Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances
CISPR 14-1 INT 2-2017 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
CISPR 14-1 Edition 5.2-2011 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
CISPR 14-1-2016 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
CISPR 14-1 INT 1-2017 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

CU-NC, The use of particle size analyzer

NC 21-02-1967 Aproximate concentration reagent solutions for general use
NC 21-03-1968 Exact concentration reagent solutions for general use

未注明发布机构, The use of particle size analyzer

BS 3625:1963(1999) Specification for Eyepiece and screen graticules — For the determination of particle size of powders
BS ISO 13323-1:2000(2002) Determination of particle size distribution — Single - particle light interaction methods — Part 1 : Light interaction considerations
BS 5540-6:1990(2011) Evaluating particulate contamination of hydraulic fluids — Part 6 : Method of calibrating liquid automatic particle - count instruments (using mono - sized latex spheres)
BS IEC 61336:1996(1999) Nuclear instrumentation — Thickness measurement systems utilizing ionizing radiation — Definitions and test methods

GOSTR, The use of particle size analyzer

GOST R 58400.8-2019 Automobile roads of general use. Petroleum-based bitumen binders. Method of determining the flexural creep stiffness at subzero temperatures using the bending beam rheometer (BBR)
GOST R 58401.6-2019 Automobile roads of general use. Asphalt mixtures and asphalt concrete for road pavement. Method for determining the degree of coating grains of aggregate by asphalt binder

Canadian Standards Association (CSA), The use of particle size analyzer

CAN/CSA-C22.2 NO.60335-2-56-2015 Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances (Third Edition)
CSA ISO 18847:2021 Solid biofuels - Determination of particle density of pellets and briquettes (Adopted ISO 18847:2016, first edition, 2016-09-01)

CEN - European Committee for Standardization, The use of particle size analyzer

EN ISO 8130-13:2019 Coating powders - Part 13: Particle size analysis by laser diffraction

KR-KS, The use of particle size analyzer

KS A 0095-2007(2022) Determination of particle size distribution by the weight of sedimentation in liquid
KS P ISO 8871-3-2020 Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 3: Determination of released-particle count

American Society of Mechanical Engineers (ASME), The use of particle size analyzer

ASME PTC 19.5-1972 Application, Part II of fluid meters: Interim supplement on instruments and apparatus

RO-ASRO, The use of particle size analyzer

STAS SR ISO 9477:1995 High strength cast steels for general engineering and structural purposes
STAS SR ISO 8322-4:1995 Building construction - Measuring instruments - Procedures for determining accuracy in use. Part 4: Theodolites
STAS SR ISO 8322-7:1995 Building construction - Measuring instruments- Procedures for determining accuracy in use. Part 7: Instruments when use for setting out
STAS SR CEI 1018-1995 High range beta and photon dose and dose rate portable instruments for emerpency radiation protection purposes
STAS SR ISO 8322-6:1995 Building construction - Measuring instriiments- Procedures for determining sccuracy in use. Part 6: Laser instruments
STAS SR ISO 8322-3:1995 Building construction - Measuring instruments- Procedures for determining accuracy in use. Part 3: Optical levelling instruments

Professional Standard - Electron, The use of particle size analyzer

SJ/T 10943-1996 Test method for granulometric distribution of alundum powder for vacuum tubes - Density balance method

工业和信息化部, The use of particle size analyzer

SJ/T 10943-2020 Density balance method for determination of particle size distribution of corundum powder for electric vacuum devices
YS/T 738.5-2020 Methods for analysis of aluminum hydroxide for fillers Part 5: Determination of particle size

SE-SIS, The use of particle size analyzer

SIS SS-ISO 898-1:1991 Bolts, screws and studs - Nominal lengths, and thread lengths for general purpose bolts
SIS SS-ISO 888:1986 Bolts, screws and studs - Nominal lengths, and thread lengths for general purpose bolts
SIS SS-ISO 898/2:1985 Bolts, screws and studs - Nominal lengths, and thread lengths for general purpose bolts
SIS SS 441 01 65-1989 Safety requirements for mains operated electronic and related apparatus for household and similar general use

国家能源局, The use of particle size analyzer

SH/T 0940-2016 Test methods for analyzing in-service lubricants using specific four-in-one testers (atomic emission spectrometry, infrared spectroscopy, viscosity and laser particle counter)

国家市场监督管理总局、中国国家标准化管理委员会, The use of particle size analyzer

GB/T 37163-2018 Hydraulic fluid power—Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
GB/T 40291-2021 Nuclear instrumentation High—purity germanium crystals for radiation detectors—Measurement methods of basic characteristics

Professional Standard - Aviation, The use of particle size analyzer

HB 8581-2020 Hydraulic fluid power- Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light- extinction principle

Canadian General Standards Board （CGSB), The use of particle size analyzer

CGSB 88.21-M90-CAN/CGSB-1990 Graduations Et Marques Des Instruments De Mesure Lineaire Pour La Construction, L'Arpentage Et D'Autres Applications Particulieres

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), The use of particle size analyzer

ASHRAE 4674-2004 An Algorithm of Stereoscopic Particle Image Velocimetry for Full-Scale Room Airflow Studies

IEC - International Electrotechnical Commission, The use of particle size analyzer

IEC 61547 INT 1:2013 EQUIPMENT FOR GENERAL LIGHTING PURPOSES – EMC IMMUNITY REQUIREMENTS (Edition 2.0)

Society of Automotive Engineers (SAE), The use of particle size analyzer

SAE J444-2005 Cast Shot and Grit Size Specifications for Peening and cleaning
SAE J444-2012 Cast Shot and Grit Size Specifications for Peening and Cleaning
SAE AMS3358B-1995 Silicone Potting Compound, Elastomeric Two-Part, General Purpose 80 to 180 Poise (8 to 18 Pa-s) Viscosity
SAE AMS3361B-1995 Silicone Potting Compound, Elastomeric Two-Part, General Purpose 150 to 400 Poise (15 to 40 Pa-s) Viscosity
SAE AMS3359B-1995 Silicone Potting Compound, Elastomeric Two-Part, General Purpose 200 to 400 Poises (20 to 40 Pa-s) Viscosity
SAE AMS3361C-2012 Silicone Potting Compound, Elastomeric, Two-Part, General Purpose, 140 to 400 Poise (15 to 40 Pa˙s) Viscosity
SAE AMS3358C-2012 Silicone Potting Compound, Elastomeric, Two-Part General Purpose, 80 to 180 Poise (8 to 18 Pa˙s) Viscosity

(U.S.) Ford Automotive Standards, The use of particle size analyzer

FORD WSS-M6J175-A-1997 PRIMER SURFACER, 130 C BAKING TEMPERATURE, CHIP AND SCRATCH INHIBITING, REPAIR PARTS

Malaysia Standards, The use of particle size analyzer

MS 1478-1999 Specification for low-density polyethylene films for general use and packaging applications

ESDU - Engineering Sciences Data Unit, The use of particle size analyzer

ESDU 09016-2013 Use of local-flow conditions for calculation of roughness-particle height in transition strips on wings
ESDU 17008-2018 A Practical Guide to Turbulence and Flow Measurement by Thermal Anemometry (CTA)@ Laser-Doppler Anemometry (LDA) and Particle-Image Velocimetry (PIV) Part 3: Laser-Doppler Anemometry
ESDU 16001-2018 A Practical Guide to Turbulence and Flow Measurement by Thermal Anemometry (CTA)@ Laser-Doppler Anemometry (LDA) and Particle-Image Velocimetry (PIV) Part 1: Overview and Selection of Measurement Technique

U.S. Air Force, The use of particle size analyzer

AIR FORCE MS27999-1961 LENS, CAMERA, GENERAL PHOTOGRAPHIC, MOUNTED WIDE ANGLE-TYPE

CENELEC - European Committee for Electrotechnical Standardization, The use of particle size analyzer

EN 60335-2-56:1991 Safety of Household and Similar Electrical Appliances Part 2: Particular Requirements for Projectors and Similar Appliances
EN 60335-2-56:1997 Safety of Household and Similar Electrical Appliances Part 2: Particular Requirements for Projectors and Similar Appliances

US-FCR, The use of particle size analyzer

FCR COE CRD-C 53-01-2001 TEST METHOD FOR CONSISTENCY OF NO-SLUMP CONCRETE USING THE MODIFIED VEBE APPARATUS

TR-TSE, The use of particle size analyzer

TS 1945-1975 ALUMINIUM OXIDE PRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM — PARTICLE S?ZE ANALYSIS — SIEVING METHOD

TH-TISI, The use of particle size analyzer

TIS 2450-2009 Bolts, screws and studs.nominal lengths, and thread lengths for general purpose bolts

VE-FONDONORMA, The use of particle size analyzer

NORVEN 55-4-1960

NZ-SNZ, The use of particle size analyzer

SAA/SNZ HB 86.2-1998 Guide to the Selection, Care, Calibration and Checking of Measuring Instruments in Industry Part 2: Simple Length and Angle Measuring Instruments

ZA-SANS, The use of particle size analyzer

SANS 60335-2-56:2009 Household and similar electrical appliances - Safety Part 2-56: Particular requirements for projectors and similar appliances
SANS 4044:2007 Methods for determination of fibre length by comb sorter diagram

Professional Standard - Petrochemical Industry, The use of particle size analyzer

SH/T 1612.8-2005 Purified terephthalic acid for industrial use - Determination of partical size distribution - Laser diffraction method

Professional Standard - Automobile, The use of particle size analyzer

QC/T 29104-2013 Limiting value of contamination level of solid particles of special purpose vehicle hydraulic system

PL-PKN, The use of particle size analyzer

PN E06300-15-1990 Electrical appliances for household use and similar purposes General requirements and tests procedures Mechanical strength

European Committee for Electrotechnical Standardization（CENELEC）, The use of particle size analyzer

EN 62533:2016 Radiation protection instrumentation - Highly sensitive hand-held instruments for photon detection of radioactive material
EN 62534:2015 Radiation protection instrumentation - Highly sensitive hand-held instruments for neutron detection of radioactive material