ZH
RU
ES
laboratory comparison program
laboratory comparison program, Total:204 items.
In the international standard classification, laboratory comparison program involves: Quality, Mechanical testing, Civil engineering in general, Farming and forestry, Veterinary medicine, Air quality, Dentistry, Services, Water quality, Wastes, Coals, Environmental protection, Ground service and maintenance equipment, Road vehicles in general, Road vehicle systems, Tyres, Laboratory medicine, Construction materials, Metrology and measurement in general, Products of the textile industry, Paper and board, Analytical chemistry, Petroleum products in general, Microbiology, Test conditions and procedures in general, Optics and optical measurements, Electrical engineering in general, Fuels, Solar energy engineering, Medical sciences and health care facilities in general, Electricity. Magnetism. Electrical and magnetic measurements, Crude petroleum, Buildings, Plastics.
Group Standards of the People's Republic of China, laboratory comparison program
- T/SCETIA 1001-2021 Specification for inter-laboratory comparison of construction engineering testing
- T/CAMA 74-2022 Guide for the implementation of interlaboratory comparison of agricultural machinery testing parameter
- T/FDSA 022-2021 Food inspection and testing-General requirements for interlaboratory comparison
Sichuan Provincial Standard of the People's Republic of China, laboratory comparison program
Taiwan Provincial Standard of the People's Republic of China, laboratory comparison program
- CNS 15009-2006 Proficiency testing by interlaboratory comparisons
- CNS 15125-1-2007 Solar heating - Domestic water heating systems - Part 1 : Performance rating procedure using indoor test methods
Indonesia Standards, laboratory comparison program
- SNI 2848-2008
- SNI ISO 15198:2009 Clinical laboratory medicine - In vitro diagnostic medical devices - validation of user quality control procedures by the manufacturer
- SNI 8059-2014 Standard practice for conducting an interlaboratory test program to determine the precision of test methods for construction materials
海关总署, laboratory comparison program
- SN/T 5557-2022 Implementation Guidelines for Inter-laboratory Comparisons in the Field of Phytosanitary
Professional Standard - Certification and Accreditation, laboratory comparison program
- RB/T 208-2016 Internal quality control of chemical laboratory.Comparison test
Association Francaise de Normalisation, laboratory comparison program
American Society for Testing and Materials (ASTM), laboratory comparison program
- ASTM E1301-95e1 Standard Guide for Proficiency Testing by Interlaboratory Comparisons
- ASTM E1301-95(2003) Standard Guide for Proficiency Testing by Interlaboratory Comparisons
- ASTM D8424-21 Standard Guide for Retroreflective Composite Optics Laboratory Procedures
- ASTM C802-96(2002) Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
- ASTM C802-96 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
- ASTM C802-96(2008)e1 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
- ASTM C802-09 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
- ASTM C802-09a Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
- ASTM C802-14 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
- ASTM F649-80(1999) Standard Practice for Secondary Calibration of Airborne Particle Counter Using Comparison Procedures
- ASTM F3539-22 Standard Practice for Creation of Walkway Tribometer Interlaboratory Study Reports and Test Procedures
- ASTM C802-14(2022) Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
- ASTM E784-89(2005) Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp
- ASTM E784-89(1996) Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp
- ASTM E784-89(2017) Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp
- ASTM E784-89(2022) Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp
- ASTM E2489-21 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
- ASTM E2489-16 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
- ASTM D5322-23 Standard Practice for Laboratory Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids
- ASTM E2480-07 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method with Multi-Valued Measurands
- ASTM D5327-97(2021)e1 Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
- ASTM D7448-16 Standard Practice for Establishing the Competence of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal and Coke
- ASTM D5322-17 Standard Practice for Laboratory Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids
- ASTM D5166-97(2008) Standard Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven
- ASTM D5166-97(2016) Standard Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven
- ASTM D4007-22 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
- ASTM D1796-22 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
- ASTM F2838-17 Standard Practice for Accelerated Laboratory Aging of Radial Passenger Car and Light Truck Tires through Load Range E for the Laboratory Generation of Belt Separation
- ASTM F2838-10 Standard Practice for Accelerated Laboratory Aging of Radial Passenger Car and Light Truck Tires through Load Range E for the Laboratory Generation of Belt Separation
- ASTM D4007-11(2016) Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
- ASTM E2480-12 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method with Multi-Valued Measurands
- ASTM D5327-97(2007) Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
- ASTM D5327-97(2002) Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
- ASTM D5327-97(2013) Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
- ASTM C1519-04 Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
- ASTM C1519-02 Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
- ASTM C1519-02a Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
- ASTM C1519-10(2022) Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
- ASTM D1796-11(2016) Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
Shandong Provincial Standard of the People's Republic of China, laboratory comparison program
- DB37/T 4003-2020 Neutralization test and ELISA test comparison laboratory evaluation standard
RU-GOST R, laboratory comparison program
- GOST R ISO 13528-2010 Statistical methods. Using in proficiency testing by interlaboratory comparison tests
- GOST 31879-2012 Principles of Good Laboratory Practice (GLP). Guides for compliance monitoring procedures for GLP Principles
- GOST ISO/TS 22117-2013 Microbiology of food and animal feeding stuffs. Specific requirements and guidance for proficiency testing by interlaboratory comparison
- GOST 8.298-2013 State system for ensuring the uniformity of measurements. Photoelectrical laboratory colorimeters. Verification procedure
- GOST 8.292-2013 State system for ensuring the uniformity of measurements. Laboratory conductometers of liquid. Verification procedure
Korean Agency for Technology and Standards (KATS), laboratory comparison program
- KS A ISO/IEC GUIDE 43-2-2002(2012) Proficiency testing by interlaboratory comparisons－Part 2：Selection and use of proficiency testing schemes by laboratory accreditation bodies
- KS A ISO/IEC GUIDE 43-1-2002(2012) Proficiency testing by interlaboratory comparisons－Part 1：Development and operation of proficiency testing schemes by laboratory accreditation bodies
- KS Q ISO 13528:2009 Statistical methods for use in proficiency testing by interlaboratory comparisons
- KS P ISO TR 15599:2019 Digital codification of dental laboratory procedures
- KS E ISO 8858-1:2007 Hard coal－Froth flotation testing－Part 1：Laboratory procedure
- KS R 0075-2007(2022) Steering control system laboratory impact test procedure for passenger cars
- KS R 0075-2007(2017) Steering control system laboratory impact test procedure for passenger cars
- KS E ISO 8858-1:2022 Hard coal — Froth flotation testing — Part 1: Laboratory procedure
- KS R 0075-1987 Steering control system laboratory impact test procedure for passenger cars
- KS A ISO/IEC GUIDE 43-2:2002 Proficiency testing by interlaboratory comparisons-Part 2:Selection and use of proficiency testing schemes by laboratory accreditation bodies
- KS A ISO/IEC GUIDE 43-2:2013 Proficiency testing by interlaboratory comparisons－Part 2：Selection and use of proficiency testing schemes by laboratory accreditation bodies
- KS K ISO 11379:2022 Textile floor coverings — Laboratory cleaning procedure using spray extraction
- KS K ISO 11379:2017 Textile floor coverings — Laboratory cleaning procedure using spray extraction
- KS P 2094-2020 Protocol for measurement procedures comparison and bias estimation using patient samples in in-vitro diagnostic medical laboratory
- KS K ISO 11379:2011 Textile floor coverings－Laboratory cleaning procedure using spray extraction
- KS P 2069-2020 Protocol for evaluation of detection capability for measurement procedures in in-vitro diagnostic medical laboratory
- KS P ISO 15198:2006 Clinical laboratory medicine-In vitro diagnostic medical devices-Validation of user quality control procedures by the manufacturer
- KS P ISO 15198:2017 Clinical laboratory medicine — In vitro diagnostic medical devices — Validation of user quality control procedures by the manufacturer
Danish Standards Foundation, laboratory comparison program
- DS/ISO 13528:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons
- DS/CEN/TS 14793:2007 Stationary source emission - Intralaboratory validation procedure for an alternative method compared to a reference method
- DS/EN 16101:2013 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment
- DS/CEN/TR 14742:2006 Characterization of sludges - Laboratory chemical conditioning procedure
- DS/EN ISO 24998:2009 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures
- DS/CEN ISO/TS 22117:2011 Microbiology of food and animal feeding stuffs – Specific requirements and guidance for proficiency testing by interlaboratory comparison
- DS/ISO 17822:2020 In vitro diagnostic test systems – Nucleic acid amplification-based examination procedures for detection and identification of microbial pathogens – Laboratory quality practice guideLaboratory quality practice guide
ZA-SANS, laboratory comparison program
- SANS 13528:2009 Statistical methods for use in proficiency testing by interlaboratory comparisons
- SANS 11379:2003 Textile floor coverings - Laboratory cleaning procedure using spray extraction
RO-ASRO, laboratory comparison program
PL-PKN, laboratory comparison program
- PN B13035-1974 Laboratory glassware Separating funnels
- PN-EN ISO 15195-2019-04 P Laboratory medicine -- Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018)
国家市场监督管理总局、中国国家标准化管理委员会, laboratory comparison program
- GB/T 28043-2019 Statistical methods for use in proficiency testing by interlaboratory comparison
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, laboratory comparison program
- GB/T 28043-2011 Statistical methods for use in proficiency testing by interlaboratory comparisons
- GB/T 15483.2-1999 Proficiency testing by interlaboratory comparisons--Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
- GB/T 15483.1-1999 Proficiency testing by interlaboratory comparisons--Part 1: Development and operation of proficiency testing schemes
- GB/T 22274.1-2008 Guidance for authorities overseeing good laboratory practice - part 1: guidance for procedures for overseeing compliance with good laboratory practice
- GB/T 21919-2022 Laboratory medicine—Requirements for the competence of calibration laboratories using reference measurement procedures
CEN - European Committee for Standardization, laboratory comparison program
- PD CEN/TS 14793:2005 Stationary source emission - Intralaboratory validation procedure for an alternative method compared to a reference method
US-FCR, laboratory comparison program
KR-KS, laboratory comparison program
- KS P ISO TR 15599-2019 Digital codification of dental laboratory procedures
- KS E ISO 8858-1-2022 Hard coal — Froth flotation testing — Part 1: Laboratory procedure
- KS P ISO 15198-2017(2022) Clinical laboratory medicine — In vitro diagnostic medical devices — Validation of user quality control procedures by the manufacturer
- KS K ISO 11379-2017 Textile floor coverings — Laboratory cleaning procedure using spray extraction
- KS K ISO 11379-2022 Textile floor coverings — Laboratory cleaning procedure using spray extraction
- KS P ISO 15198-2017 Clinical laboratory medicine — In vitro diagnostic medical devices — Validation of user quality control procedures by the manufacturer
German Institute for Standardization, laboratory comparison program
- DIN 66054:1982 Comparative testing; Principles regarding procedure
- DIN V 55394-2:2000 Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies (ISO/IEC Guide 43-2:1997)
- DIN EN 14742:2015-07 Characterization of sludges - Laboratory chemical conditioning procedure; German version EN 14742:2015
- DIN EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018)
- DIN 25429:1985 Programme for hot cell shielding with gamma point sources
- DIN EN ISO 15195:2019-07 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018); German version EN ISO 15195:2019
- DIN ISO 13528:2009 Statistical methods for use in proficiency testing by interlaboratory comparisons (ISO 13528:2005); Text in German and English
- DIN EN ISO 22117:2019-08 Microbiology of the food chain - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO 22117:2019); German version EN ISO 22117:2019
- DIN ISO 13528:2020 Statistical methods for use in proficiency testing by interlaboratory comparison (ISO 13528:2015, Corrected version 2016-10-15); Text in German and English
- DIN CEN/TS 14793:2005 Stationary source emission - Intralaboratory validation procedure for an alternative method compared to a reference method; German version CEN/TS 14793:2005
- DIN EN ISO 24998:2009-03 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures (ISO 24998:2008); German version EN ISO 24998:2008
- DIN EN ISO 22117:2019 Microbiology of the food chain - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO 22117:2019)
- DIN EN 16101:2012 Water quality.Guidance standard on interlaboratory comparison studies for ecological assessment; German version EN 16101:2012
- DIN 38402-45:2014 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45)
- DIN 38402-45:2003 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45)
British Standards Institution (BSI), laboratory comparison program
- BS ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
- BS ISO 13528:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons
- BS EN 14742:2015 Characterization of sludges. Laboratory chemical conditioning procedure
- BS ISO 8858-1:2019 Hard coal. Froth flotation testing - Laboratory procedure
- BS EN 16101:2012 Water quality. Guidance standard on interlaboratory comparison studies for ecological assessment
- BS DD CEN/TS 14793:2005 Stationary source emission — Intralaboratory validation procedure for an alternative method compared to a reference method
- BS DD CEN/TS 14793:2006 Stationary source emission. Intralaboratory validation procedure for an alternative method compared to a reference method
- BS ISO 11379:1998 Textile floor coverings - Laboratory cleaning procedure using spray extraction
- BS ISO 11379:2009 Textile floor coverings - Laboratory cleaning procedure using spray extraction
- BS EN ISO 22117:2019 Tracked Changes. Microbiology of the food chain. Specific requirements and guidance for proficiency testing by interlaboratory comparison
- BS DD CEN ISO/TS 22117:2010 Microbiology of food and animal feeding stuffs. Specific requirements and guidance for proficiency testing by interlaboratory comparison
- BS EN ISO 15195:2019 Tracked Changes. Laboratory medicine. Requirements for the competence of calibration laboratories using reference measurement procedures
International Organization for Standardization (ISO), laboratory comparison program
- ISO 13528:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons
- ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
- ISO/IEC Guide 43-2:1997 Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
- ISO 15195:2018 Laboratory medicine — Requirements for the competence of calibration laboratories using reference measurement procedures
- ISO 8858-1:1990 Hard coal; froth flotation testing; part 1: laboratory procedure
- ISO/IEC Guide 43-1:1997 Proficiency testing by interlaboratory comparisons - Part 1: Development and operation of proficiency testing schemes
- ISO 11379:2009 Textile floor coverings - Laboratory cleaning procedure using spray extraction
- ISO 8858-1:1990/Cor 1:2001 Hard coal - Froth flotation testing - Part 1: Laboratory procedure; Technical Corrigendum 1
- ISO 3675:1976 Crude petroleum and liquid petroleum products — Laboratory determination of density or relative density — Hydrometer method
- ISO/TS 22117:2010 Microbiology of food and animal feeding stuffs - Specific requirements and guidance for proficiency testing by interlaboratory comparison
- ISO 15198:2004 Clinical laboratory medicine - In vitro diagnostic medical devices - Validation of user quality control procedures by the manufacturer
- ISO/TR 18486:2018 Plastics — Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance
Lithuanian Standards Office , laboratory comparison program
- LST EN 16101-2013 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment
- LST EN ISO 24998:2009 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures (ISO 24998:2008)
AENOR, laboratory comparison program
- UNE-EN 16101:2013 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment
- UNE 51082:1986 STANDARD TEST METHOD FOR WATER AND SEDIMENT IN FUEL-OILS BY THE CENTRIFUGE METHOD (LABORATORY PROCEDURE)
- UNE-EN ISO 24998:2009 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures (ISO 24998:2008)
TH-TISI, laboratory comparison program
- TIS 5043.2-1997 Proficiency testing by interlaboratory comparisons.part 2: selection and use of proficiency testing schemes by laboratory accreditation bodies
- TIS 5043.1-1997 Proficiency testing by interlaboratory comparisons.part 1: development and operation of proficiency testing schemes
European Committee for Standardization (CEN), laboratory comparison program
- EN 14742:2015 Characterization of sludges - Laboratory chemical conditioning procedure
- CEN ISO/TS 22117:2010 Microbiology of food and animal feeding stuffs - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO/TS 22117:2010)
- EN ISO/TS 22117:2010 Microbiology of food and animal feeding stuffs - Specific requirements and guidance for proficiency testing by interlaboratory comparison
SAE - SAE International, laboratory comparison program
- SAE J921-1965 INSTRUMENT PANEL LABORATORY IMPACT TEST PROCEDURES
- SAE J944-1968 STEERING CONTROL SYSTEM - PASSENGER CAR - LABORATORY TEST PROCEDURE
- SAE J944-1965 STEERING WHEEL ASSEMBLY - LABORATORY TEST PROCEDURE
- SAE J944-1980 STEERING WHEEL ASSEMBLY - LABORATORY TEST PROCEDURE
- SAE J921B-1971 MOTOR VEHICLE INSTRUMENT PANEL LABORATORY IMPACT TEST PROCEDURES - HEAD AREA
- SAE J2425-2021 Steering Control Systems - Laboratory Test Procedure Heavy Trucks
- SAE J2425-2004 Steering Control Systems - Laboratory Test Procedure Heavy Trucks
Society of Automotive Engineers (SAE), laboratory comparison program
- SAE J921A-1967 INSTRUMENT PANEL LABORATORY IMPACT TEST PROCEDURE—HEAD AREA
- SAE J338-1981 Motor Vehicle Instrument Panel Laboratory Impact Test Procedure-Knee-Leg Area
- SAE J338-1968 Motor Vehicle Instrument Panel Laboratory Impact Test Procedure-Knee-Leg Area
- SAE J944A-1968 STEERING CONTROL SYSTEM — PASSENGER CAR — LABORATORY TEST PROCEDURE
- SAE J1633-1995 Laboratory Speed Test Procedure for Light Truck Tires
- SAE J944-2022 Steering Control System - Passenger Car - Laboratory Test Procedure
- SAE J921-1981 Motor Vehicle Instrument Panel Laboratory Impact Test Procedure-Head Area
- SAE J2425-1998 Steering Control Systems - Laboratory Test Procedure Heavy Trucks
- SAE J346-1968 SEATBACK ASSEMBLY LABORATORY IMPACT TEST PROCEDURE-HEAD AREA
- SAE J346-1981 Motor Vehicle Seatback Assembly Laboratory Impact Test Procedure-Head Area
GM North America, laboratory comparison program
- GM GM9125P-1991 Procedures for Laboratory Accelerated Exposure of Automotive Materials
ES-UNE, laboratory comparison program
- UNE-EN 14742:2015 Characterization of sludges - Laboratory chemical conditioning procedure
- UNE-EN ISO 22117:2020 Microbiology of the food chain - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO 22117:2019)
- UNE-EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018)
Professional Standard - Civil Aviation, laboratory comparison program
- MH/T 6096-2013 Proficiency testing procedures for commercial aviation oil testing laboratory
Japanese Industrial Standards Committee (JISC), laboratory comparison program
- JIS D 1061:1995 Steering control system laboratory impact test procedure for passenger cars
- JIS Q 0043-2:1998 Proficiency testing by interlaboratory comparisons -- Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
API - American Petroleum Institute, laboratory comparison program
- API RP 29-1962 SUGGESTED PROCEDURES FOR LABORATORY EVALUATION OF DRILLING MUD MATERIALS
- API RP 13I-2000 Recommended Practice Standard Procedure for Laboratory Testing Drilling Fluids (Sixth Edition)
- API RP 13I-1990 Recommended Practice Standard Procedure for Laboratory Testing Drilling Fluids (FOURTH EDITION)
- API RP 13I SUPP 1-1992 Recommended Practice Standard Procedure for Laboratory Testing Drilling Fluids (Fourth Edition)
- API RP 13I-1985 RECOMMENDED PRACTICE STANDARD PROCEDURE FOR LABORATORY TESTING DRILLING FLUIDS SECOND EDITION; SUPPLEMENT 1 - 1986
- API PUBL 4657-1997 Effects of Sampling and Analytical Procedures on the Measurement of Geochemical Indicators of Intrinsic Bioremediation: Laboratory and Field Studies
- API RP 13I-1988 RECOMMENDED PRACTICE STANDARD PROCEDURE FOR LABORATORY TESTING DRILLING FLUIDS THIRD EDITION; SUPPLEMENT 1 - JUNE 1989
- API PUBL 45821-1993 Comparative Evaluation of Biological Treatment of Petroleum Product Terminal Wastewater by the Sequencing Batch Reactor Process and the Rotating Biological Contractor Process Appendices: Analytical Laboratory Results
- API PUBL 4534 VOL II-1991 Effects of Fuel RVP and Fuel Blends on Emissions at Non-FTP Temperatures Volume II: Compilation of Test Data and Laboratory Procedures
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., laboratory comparison program
- ASHRAE CH-99-13-1-1999 Integration of an Equation-Solving Program into an Energy Systems Laboratory Course
- ASHRAE 68-1986 Laboratory Method of Testing In-Duct Sound Power Measurement Procedure for Fans (AMCA 330-86)
未注明发布机构, laboratory comparison program
- BS 7530-1:1992(2007) Methods for Froth flotation testing of hard coal — Part 1 : Laboratory procedure
International Telecommunication Union (ITU), laboratory comparison program
- ITU-R P.1148-1-1997 Standardized Procedure for Comparing Predicted and Observed HF Sky-Wave Signal Intensities and the Presentation of Such Comparisons
- ITU-R P.1148-1 FRENCH-1997 STANDARDIZED PROCEDURE FOR COMPARING PREDICTED AND OBSERVED HF SKY-WAVE SIGNAL INTENSITIES AND THE PRESENTATION OF SUCH COMPARISONS
- ITU-R P.1148-1 SPANISH-1997 STANDARDIZED PROCEDURE FOR COMPARING PREDICTED AND OBSERVED HF SKY-WAVE SIGNAL INTENSITIES AND THE PRESENTATION OF SUCH COMPARISONS
- ITU-T G.728 APP I FRENCH-1995 Programs and test sequences for implementation verification of the algorithm of the G.728 16 kbit/s LD-CELP speech coder Programme et s閝uences de test pour la v閞ification des impl閙entations de l'algorithme du vocodeur LD-CELP G.728 ?16 kbit/s
American National Standards Institute （ANSI), laboratory comparison program
- ANSI/TAPPI T1211 sp-2011 Acceptance procedures for calibration laboratories providing reference materials for TAPPI Standards
Standard Association of Australia （SAA）, laboratory comparison program
- AS 2850:1986 Chemical analysis - Interlaboratory test programs - For determining precision of analytical method(s) - Guide to the planning and conduct
US-CLSI, laboratory comparison program
- CLSI H18-A4-2010 Procedures for the Handling and Processing of Blood Specimens for Common Laboratory Tests
ANSI - American National Standards Institute, laboratory comparison program
- N15.51-1990 Nuclear Materials Management - Measurement Control Program - Nuclear Materials Analytical Chemistry Laboratory (INMM)
- N15.51-2007 Methods of Nuclear Material Control - Measurement Control Program – Nuclear Materials Analytical Chemistry Laboratory (INMM)
Xinjiang Provincial Standard of the People's Republic of China, laboratory comparison program
- DB65/T 4553-2022 Specifications for biosafety risk monitoring procedures for novel coronavirus etiology laboratories
US-CFR-file, laboratory comparison program
- CFR 40-1065.15-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.15:Overview of procedures for laboratory and field testing.