ZH
RU
ES

In-lab comparison program

In-lab comparison program, Total:276 items.

In the international standard classification, In-lab comparison program involves: Quality, Mechanical testing, Civil engineering in general, Air quality, Farming and forestry, Veterinary medicine, Dentistry, Environmental protection, Wastes, Coals, Water quality, Metrology and measurement in general, Solar energy engineering, Ground service and maintenance equipment, Road vehicles in general, Tyres, Road vehicle systems, Products of the textile industry, Paints and varnishes, Laboratory medicine, Analytical chemistry, Paper and board, Construction materials, Ferrous metals, Petroleum products in general, Microbiology, Optics and optical measurements, Medical sciences and health care facilities in general, Test conditions and procedures in general, Electricity. Magnetism. Electrical and magnetic measurements, Crude petroleum, Fuels, Testing of metals, Electrical engineering in general, Protection of and in buildings, Buildings, Plastics, Burners. Boilers, Domestic, commercial and industrial heating appliances, Hydraulic energy engineering.

Professional Standard - Certification and Accreditation, In-lab comparison program

RB/T 208-2016 Internal quality control of chemical laboratory.Comparison test

RU-GOST R, In-lab comparison program

GOST R ISO 13528-2010 Statistical methods. Using in proficiency testing by interlaboratory comparison tests
GOST 31879-2012 Principles of Good Laboratory Practice (GLP). Guides for compliance monitoring procedures for GLP Principles
GOST 8.298-2013 State system for ensuring the uniformity of measurements. Photoelectrical laboratory colorimeters. Verification procedure
GOST ISO/TS 22117-2013 Microbiology of food and animal feeding stuffs. Specific requirements and guidance for proficiency testing by interlaboratory comparison
GOST 8.292-2013 State system for ensuring the uniformity of measurements. Laboratory conductometers of liquid. Verification procedure

Group Standards of the People's Republic of China, In-lab comparison program

T/SCETIA 1001-2021 Specification for inter-laboratory comparison of construction engineering testing
T/CAMA 74-2022 Guide for the implementation of interlaboratory comparison of agricultural machinery testing parameter
T/FDSA 022-2021 Food inspection and testing-General requirements for interlaboratory comparison

Sichuan Provincial Standard of the People's Republic of China, In-lab comparison program

DB51/T 2170-2016 Guidelines for Organizational Interlaboratory Comparisons

Taiwan Provincial Standard of the People's Republic of China, In-lab comparison program

CNS 15009-2006 Proficiency testing by interlaboratory comparisons
CNS 15125-1-2007 Solar heating - Domestic water heating systems - Part 1 : Performance rating procedure using indoor test methods

Indonesia Standards, In-lab comparison program

SNI 2848-2008
SNI ISO 15198:2009 Clinical laboratory medicine - In vitro diagnostic medical devices - validation of user quality control procedures by the manufacturer
SNI 8059-2014 Standard practice for conducting an interlaboratory test program to determine the precision of test methods for construction materials

API - American Petroleum Institute, In-lab comparison program

API REPORT 83-50-1985 Interlaboratory and Intralaboratory Comparision of the API Drilling Fluids Bioassay Protocol
API RP 29-1962 SUGGESTED PROCEDURES FOR LABORATORY EVALUATION OF DRILLING MUD MATERIALS
API RP 13I-2000 Recommended Practice Standard Procedure for Laboratory Testing Drilling Fluids (Sixth Edition)
API RP 13I-1990 Recommended Practice Standard Procedure for Laboratory Testing Drilling Fluids (FOURTH EDITION)
API RP 13I SUPP 1-1992 Recommended Practice Standard Procedure for Laboratory Testing Drilling Fluids (Fourth Edition)
API RP 13I-1985 RECOMMENDED PRACTICE STANDARD PROCEDURE FOR LABORATORY TESTING DRILLING FLUIDS SECOND EDITION; SUPPLEMENT 1 - 1986
API RP 13I-1988 RECOMMENDED PRACTICE STANDARD PROCEDURE FOR LABORATORY TESTING DRILLING FLUIDS THIRD EDITION; SUPPLEMENT 1 - JUNE 1989
API PUBL 4657-1997 Effects of Sampling and Analytical Procedures on the Measurement of Geochemical Indicators of Intrinsic Bioremediation: Laboratory and Field Studies
API RP 13I-1995 Recommended Practice Standard Procedure for Laboratory Testing Drilling Fluids (Supplement 1 - July 1996; Supplement 2 - June 1997)
API PUBL 4534 VOL II-1991 Effects of Fuel RVP and Fuel Blends on Emissions at Non-FTP Temperatures Volume II: Compilation of Test Data and Laboratory Procedures
API PUBL 45821-1993 Comparative Evaluation of Biological Treatment of Petroleum Product Terminal Wastewater by the Sequencing Batch Reactor Process and the Rotating Biological Contractor Process Appendices: Analytical Laboratory Results

CEN - European Committee for Standardization, In-lab comparison program

PD CEN/TS 14793:2005 Stationary source emission - Intralaboratory validation procedure for an alternative method compared to a reference method
EN 17136:2019 Water quality - Guidance on field and laboratory procedures for quantitative analysis and identification of macroinvertebrates from inland surface waters

Danish Standards Foundation, In-lab comparison program

DS/CEN/TS 14793:2007 Stationary source emission - Intralaboratory validation procedure for an alternative method compared to a reference method
DS/ISO 13528:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons
DS/EN 16101:2013 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment
DS/CEN/TR 14742:2006 Characterization of sludges - Laboratory chemical conditioning procedure
DS/EN ISO 24998:2009 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures
DS/CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
DS/CEN ISO/TS 22117:2011 Microbiology of food and animal feeding stuffs – Specific requirements and guidance for proficiency testing by interlaboratory comparison
DS/ISO 17822:2020 In vitro diagnostic test systems – Nucleic acid amplification-based examination procedures for detection and identification of microbial pathogens – Laboratory quality practice guideLaboratory quality practice guide
DS/EN ISO 10140-4:2010 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements
DS/ISO 10140-4:2021 Acoustics – Laboratory measurement of sound insulation of building elements – Part 4: Measurement procedures and requirements
DS/EN ISO 10140-4:2021 Acoustics – Laboratory measurement of sound insulation of building elements – Part 4: Measurement procedures and requirements (ISO 10140-4:2021)
DS/CWA 50272:2021 Methodology, procedures and equipment required for the laboratory testing of a modular and crosscutting Power Take-Off for wave energy converters

Association Francaise de Normalisation, In-lab comparison program

NF X06-510*NF ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
NF S92-062*NF EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures
FD S91-017*FD ISO/TR 15599:2002 Digital codification of dental laboratory procedures
FD ISO/TR 15599:2002 Codification numérique des procédures au laboratoire dentaire
NF X06-510:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons.
NF EN 14742:2015 Caractérisation des boues - Mode opératoire de conditionnement chimique en laboratoire
NF EN ISO 22117:2019 Microbiologie de la chaîne alimentaire - Exigences spécifiques et recommandations relatives aux essais d'aptitude par comparaison interlaboratoires
NF T30-607:1980 Fillers for interior use. Measurement of adhesion. Cohesion by a conventional stripping process.
FD A06-500*FD CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
NF V08-304*NF EN ISO 22117:2019 Microbiology of the food chain - Specific requirements and guidance for proficiency testing by interlaboratory comparison
FD V09-106:2013 Analyse sensorielle - Lignes directrices pour organiser et interpréter une comparaison intra laboratoire dans le cas de mesures hédoniques
NF S31-049-4*NF EN ISO 10140-4:2021 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4 : measurement procedures and requirements
NF EN ISO 10140-4:2021 Acoustique - Mesurage en laboratoire de l'isolation acoustique des éléments de construction - Partie 4 : exigences et modes opératoires de mesurage
NF EN ISO 15195:2019 Biologie médicale - Exigences relatives à la compétence des laboratoires d'étalonnage utilisant des procédures de mesure de référence
XP V03-111:1995 Analyse des produits agricoles et alimentaires - Protocole d'évaluation intra-laboratoire d'une méthode alternative d'analyse qualitative par rapport à une méthode de référence

海关总署, In-lab comparison program

SN/T 5557-2022 Implementation Guidelines for Inter-laboratory Comparisons in the Field of Phytosanitary

American Society for Testing and Materials (ASTM), In-lab comparison program

ASTM E1301-95e1 Standard Guide for Proficiency Testing by Interlaboratory Comparisons
ASTM E1301-95(2003) Standard Guide for Proficiency Testing by Interlaboratory Comparisons
ASTM D7783-21 Standard Practice for Within-laboratory Quantitation Estimation (WQE)
ASTM D8424-21 Standard Guide for Retroreflective Composite Optics Laboratory Procedures
ASTM C802-96(2002) Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-96 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-96(2008)e1 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-09 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-09a Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-14 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM F3539-22 Standard Practice for Creation of Walkway Tribometer Interlaboratory Study Reports and Test Procedures
ASTM C802-14(2022) Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM E784-89(2005) Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp
ASTM E784-89(1996) Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp
ASTM E784-89(2017) Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp
ASTM E784-89(2022) Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp
ASTM E2489-16 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ASTM E2489-21 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ASTM F2838-17 Standard Practice for Accelerated Laboratory Aging of Radial Passenger Car and Light Truck Tires through Load Range E for the Laboratory Generation of Belt Separation
ASTM F2838-10 Standard Practice for Accelerated Laboratory Aging of Radial Passenger Car and Light Truck Tires through Load Range E for the Laboratory Generation of Belt Separation
ASTM D5322-23 Standard Practice for Laboratory Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids
ASTM D4007-22 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D1796-22 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM D5166-97(2008) Standard Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven
ASTM D5166-97(2016) Standard Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven
ASTM D5327-97(2021)e1 Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
ASTM D7448-16 Standard Practice for Establishing the Competence of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal and Coke
ASTM D5322-17 Standard Practice for Laboratory Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids
ASTM E2480-07 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method with Multi-Valued Measurands
ASTM D4007-11(2016) Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
ASTM D5327-97(2007) Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
ASTM D5327-97(2002) Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
ASTM D5327-97(2013) Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
ASTM C1519-04 Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C1519-02 Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C1519-02a Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C1519-10(2022) Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM D1796-11(2016) Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
ASTM E2480-12 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method with Multi-Valued Measurands
ASTM D4674-02a Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments
ASTM D4674-19 Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments
ASTM D3456-86(2012) Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack
ASTM C1210-18 Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry
ASTM C1501-09 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
ASTM C1501-14 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
ASTM E2489-11 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ASTM D7782-13 Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data
ASTM D7783-13 Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data
ASTM E2554-07 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method in a Single Laboratory Using a Control Sample Program
ASTM C1519-10(2017) Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C1501-23 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures

Shandong Provincial Standard of the People's Republic of China, In-lab comparison program

DB37/T 4003-2020 Neutralization test and ELISA test comparison laboratory evaluation standard

RO-ASRO, In-lab comparison program

STAS 10517-1976 Laboratory glassware SEPARATING FUNNELS

PL-PKN, In-lab comparison program

PN B13035-1974 Laboratory glassware Separating funnels
PN-EN ISO 15195-2019-04 P Laboratory medicine -- Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018)
PN-EN ISO 10140-4-2021-10 E Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 4: Measurement procedures and requirements (ISO 10140-4:2021)

Korean Agency for Technology and Standards (KATS), In-lab comparison program

KS A ISO/IEC GUIDE 43-2-2002(2012) Proficiency testing by interlaboratory comparisons－Part 2：Selection and use of proficiency testing schemes by laboratory accreditation bodies
KS A ISO/IEC GUIDE 43-1-2002(2012) Proficiency testing by interlaboratory comparisons－Part 1：Development and operation of proficiency testing schemes by laboratory accreditation bodies
KS P ISO TR 15599:2019 Digital codification of dental laboratory procedures
KS Q ISO 13528:2009 Statistical methods for use in proficiency testing by interlaboratory comparisons
KS E ISO 8858-1:2007 Hard coal－Froth flotation testing－Part 1：Laboratory procedure
KS R 0075-2007(2022) Steering control system laboratory impact test procedure for passenger cars
KS R 0075-2007(2017) Steering control system laboratory impact test procedure for passenger cars
KS E ISO 8858-1:2022 Hard coal — Froth flotation testing — Part 1: Laboratory procedure
KS R 0075-1987 Steering control system laboratory impact test procedure for passenger cars
KS A ISO/IEC GUIDE 43-2:2002 Proficiency testing by interlaboratory comparisons-Part 2:Selection and use of proficiency testing schemes by laboratory accreditation bodies
KS A ISO/IEC GUIDE 43-2:2013 Proficiency testing by interlaboratory comparisons－Part 2：Selection and use of proficiency testing schemes by laboratory accreditation bodies
KS K ISO 11379:2022 Textile floor coverings — Laboratory cleaning procedure using spray extraction
KS K ISO 11379:2017 Textile floor coverings — Laboratory cleaning procedure using spray extraction
KS K ISO 11379:2011 Textile floor coverings－Laboratory cleaning procedure using spray extraction
KS P 2094-2020 Protocol for measurement procedures comparison and bias estimation using patient samples in in-vitro diagnostic medical laboratory
KS P 2069-2020 Protocol for evaluation of detection capability for measurement procedures in in-vitro diagnostic medical laboratory
KS F ISO 10140-4:2016 Acoustics ― Laboratory measurement of sound insulation of building elements ― Part 4: Measurement procedures and requirements
KS F ISO 10140-4-2016(2021) Acoustics ― Laboratory measurement of sound insulation of building elements ― Part 4: Measurement procedures and requirements
KS P ISO 15198:2006 Clinical laboratory medicine-In vitro diagnostic medical devices-Validation of user quality control procedures by the manufacturer
KS P ISO 15198:2017 Clinical laboratory medicine — In vitro diagnostic medical devices — Validation of user quality control procedures by the manufacturer
KS B ISO 9459-1:2003 Solar heating－Domestic water heating systems－Part 1：Performance rating procedure using indoor test methods
KS P ISO 17822:2021 In vitro diagnostic test systems — Nucleic acid amplification-based examination procedures for detection and identification of microbial pathogens — Laboratory quality practice guide
KS B ISO 9459-1-2003(2018)

German Institute for Standardization, In-lab comparison program

DIN V 55394-2:2000 Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies (ISO/IEC Guide 43-2:1997)
DIN CEN/TS 14793:2005 Stationary source emission - Intralaboratory validation procedure for an alternative method compared to a reference method; German version CEN/TS 14793:2005
DIN EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018)
DIN EN 14742:2015-07 Characterization of sludges - Laboratory chemical conditioning procedure; German version EN 14742:2015
DIN 25429:1985 Programme for hot cell shielding with gamma point sources
DIN EN ISO 15195:2019-07 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018); German version EN ISO 15195:2019
DIN ISO 13528:2009 Statistical methods for use in proficiency testing by interlaboratory comparisons (ISO 13528:2005); Text in German and English
DIN EN ISO 22117:2019-08 Microbiology of the food chain - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO 22117:2019); German version EN ISO 22117:2019
DIN ISO 13528:2020 Statistical methods for use in proficiency testing by interlaboratory comparison (ISO 13528:2015, Corrected version 2016-10-15); Text in German and English
DIN EN ISO 24998:2009-03 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures (ISO 24998:2008); German version EN ISO 24998:2008
DIN EN 16101:2012 Water quality.Guidance standard on interlaboratory comparison studies for ecological assessment; German version EN 16101:2012
DIN EN 17136:2019 Water quality - Guidance on field and laboratory procedures for quantitative analysis and identification of macroinvertebrates from inland surface waters
DIN EN 17136:2019-12 Water quality - Guidance on field and laboratory procedures for quantitative analysis and identification of macroinvertebrates from inland surface waters; German version EN 17136:2019
DIN EN ISO 22117:2019 Microbiology of the food chain - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO 22117:2019)
DIN 38402-45:2014 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45)
DIN 38402-45:2003 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45)
DIN EN ISO 10140-4:2021-09 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2021); German version EN ISO 10140-4:2021

US-FCR, In-lab comparison program

FCR COE ER 1110-1-261-1999 QUALITY ASSURANCE OF LABORATORY TESTING PROCEDURES

KR-KS, In-lab comparison program

KS P ISO TR 15599-2019 Digital codification of dental laboratory procedures
KS E ISO 8858-1-2022 Hard coal — Froth flotation testing — Part 1: Laboratory procedure
KS K ISO 11379-2017 Textile floor coverings — Laboratory cleaning procedure using spray extraction
KS K ISO 11379-2022 Textile floor coverings — Laboratory cleaning procedure using spray extraction
KS P ISO 15198-2017(2022) Clinical laboratory medicine — In vitro diagnostic medical devices — Validation of user quality control procedures by the manufacturer
KS P ISO 15198-2017 Clinical laboratory medicine — In vitro diagnostic medical devices — Validation of user quality control procedures by the manufacturer
KS F ISO 10140-4-2016 Acoustics ― Laboratory measurement of sound insulation of building elements ― Part 4: Measurement procedures and requirements
KS P ISO 17822-2021 In vitro diagnostic test systems — Nucleic acid amplification-based examination procedures for detection and identification of microbial pathogens — Laboratory quality practice guide

ZA-SANS, In-lab comparison program

SANS 13528:2009 Statistical methods for use in proficiency testing by interlaboratory comparisons
SANS 11379:2003 Textile floor coverings - Laboratory cleaning procedure using spray extraction

British Standards Institution (BSI), In-lab comparison program

BS DD CEN/TS 14793:2005 Stationary source emission — Intralaboratory validation procedure for an alternative method compared to a reference method
BS DD CEN/TS 14793:2006 Stationary source emission. Intralaboratory validation procedure for an alternative method compared to a reference method
BS EN 14742:2015 Characterization of sludges. Laboratory chemical conditioning procedure
BS ISO 8858-1:2019 Hard coal. Froth flotation testing - Laboratory procedure
BS ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
BS ISO 13528:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons
BS EN 16101:2012 Water quality. Guidance standard on interlaboratory comparison studies for ecological assessment
BS ISO 11379:1998 Textile floor coverings - Laboratory cleaning procedure using spray extraction
BS ISO 11379:2009 Textile floor coverings - Laboratory cleaning procedure using spray extraction
BS EN ISO 22117:2019 Tracked Changes. Microbiology of the food chain. Specific requirements and guidance for proficiency testing by interlaboratory comparison
BS EN 17136:2019 Water quality. Guidance on field and laboratory procedures for quantitative analysis and identification of macroinvertebrates from inland surface waters
BS EN ISO 15195:2019 Tracked Changes. Laboratory medicine. Requirements for the competence of calibration laboratories using reference measurement procedures
BS DD CEN ISO/TS 22117:2010 Microbiology of food and animal feeding stuffs. Specific requirements and guidance for proficiency testing by interlaboratory comparison
BS EN ISO 10140-4:2021 Tracked Changes. Acoustics. Laboratory measurement of sound insulation of building elements. Measurement procedures and requirements
BS ISO 20189:2018 Acoustics. Screens, furniture and single objects intended for interior use. Rating of sound absorption and sound reduction of elements based on laboratory measurements
BS PD CEN/TR 10350:2009 Analysis of steels and irons — Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
BS EN 13205-4:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Laboratory performance test based on comparison of concentrations
BS ISO 15198:2004 Clinical laboratory medicine - In vitro diagnostic medical devices - Validation of user quality control procedures by the manufacturer
15/30316475 DC BS EN ISO 10140-4. Acoustics. Laboratory measurement of sound insulation of building elements. Part 4. Measurement procedures and requirements
20/30404156 DC BS EN ISO 10140-4. Acoustics. Laboratory measurement of sound insulation of building elements. Part 4. Measurement procedures and requirements

International Organization for Standardization (ISO), In-lab comparison program

ISO 15195:2018 Laboratory medicine — Requirements for the competence of calibration laboratories using reference measurement procedures
ISO/IEC Guide 43-2:1997 Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
ISO 13528:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons
ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
ISO 8858-1:1990 Hard coal; froth flotation testing; part 1: laboratory procedure
ISO/IEC Guide 43-1:1997 Proficiency testing by interlaboratory comparisons - Part 1: Development and operation of proficiency testing schemes
ISO 11379:2009 Textile floor coverings - Laboratory cleaning procedure using spray extraction
ISO 8858-1:1990/Cor 1:2001 Hard coal - Froth flotation testing - Part 1: Laboratory procedure; Technical Corrigendum 1
ISO 3675:1976 Crude petroleum and liquid petroleum products — Laboratory determination of density or relative density — Hydrometer method
ISO/TS 22117:2010 Microbiology of food and animal feeding stuffs - Specific requirements and guidance for proficiency testing by interlaboratory comparison
ISO 10140-4:2021 Acoustics — Laboratory measurement of sound insulation of building elements — Part 4: Measurement procedures and requirements
ISO 15198:2004 Clinical laboratory medicine - In vitro diagnostic medical devices - Validation of user quality control procedures by the manufacturer
ISO/TR 18486:2018 Plastics — Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, In-lab comparison program

GB/T 15483.2-1999 Proficiency testing by interlaboratory comparisons--Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
GB/T 28043-2011 Statistical methods for use in proficiency testing by interlaboratory comparisons
GB/T 22274.1-2008 Guidance for authorities overseeing good laboratory practice - part 1: guidance for procedures for overseeing compliance with good laboratory practice
GB/T 15483.1-1999 Proficiency testing by interlaboratory comparisons--Part 1: Development and operation of proficiency testing schemes
GB/T 21919-2022 Laboratory medicine—Requirements for the competence of calibration laboratories using reference measurement procedures

国家市场监督管理总局、中国国家标准化管理委员会, In-lab comparison program

GB/T 28043-2019 Statistical methods for use in proficiency testing by interlaboratory comparison

European Committee for Standardization (CEN), In-lab comparison program

EN 14742:2015 Characterization of sludges - Laboratory chemical conditioning procedure
CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
PD CEN/TR 10350:2009 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
PD CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
CEN ISO/TS 22117:2010 Microbiology of food and animal feeding stuffs - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO/TS 22117:2010)
EN ISO 10140-4:2021 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2021)
EN ISO 10140-4:2010 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements
EN ISO/TS 22117:2010 Microbiology of food and animal feeding stuffs - Specific requirements and guidance for proficiency testing by interlaboratory comparison
EN 1397:1998 Heat Exchangers - Hydronic Room Fan Coil Units - Test Procedures for Establishing the Performance Supersedes ENV 1397:1994

TH-TISI, In-lab comparison program

TIS 5043.2-1997 Proficiency testing by interlaboratory comparisons.part 2: selection and use of proficiency testing schemes by laboratory accreditation bodies
TIS 5043.1-1997 Proficiency testing by interlaboratory comparisons.part 1: development and operation of proficiency testing schemes

Lithuanian Standards Office , In-lab comparison program

LST EN 16101-2013 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment
LST EN ISO 24998:2009 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures (ISO 24998:2008)
LST EN ISO 10140-4:2010 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2010)
LST EN ISO 10140-4:2021 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2021)

AENOR, In-lab comparison program

UNE-EN 16101:2013 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment
UNE-EN ISO 24998:2009 Plastics laboratory ware - Single-use Petri dishes for microbiological procedures (ISO 24998:2008)
UNE 51082:1986 STANDARD TEST METHOD FOR WATER AND SEDIMENT IN FUEL-OILS BY THE CENTRIFUGE METHOD (LABORATORY PROCEDURE)
UNE-CEN ISO/TS 22117:2011 EX Microbiology of food and animal feeding stuffs - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO/TS 22117:2010)
UNE-EN ISO 10140-4:2011 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2010)

SAE - SAE International, In-lab comparison program

SAE J921-1965 INSTRUMENT PANEL LABORATORY IMPACT TEST PROCEDURES
SAE J944-1968 STEERING CONTROL SYSTEM - PASSENGER CAR - LABORATORY TEST PROCEDURE
SAE J944-1965 STEERING WHEEL ASSEMBLY - LABORATORY TEST PROCEDURE
SAE J944-1980 STEERING WHEEL ASSEMBLY - LABORATORY TEST PROCEDURE
SAE J2425-2021 Steering Control Systems - Laboratory Test Procedure Heavy Trucks
SAE J2425-2004 Steering Control Systems - Laboratory Test Procedure Heavy Trucks
SAE J921B-1971 MOTOR VEHICLE INSTRUMENT PANEL LABORATORY IMPACT TEST PROCEDURES - HEAD AREA

Society of Automotive Engineers (SAE), In-lab comparison program

SAE J921A-1967 INSTRUMENT PANEL LABORATORY IMPACT TEST PROCEDURE—HEAD AREA
SAE J944A-1968 STEERING CONTROL SYSTEM — PASSENGER CAR — LABORATORY TEST PROCEDURE
SAE J1633-1995 Laboratory Speed Test Procedure for Light Truck Tires
SAE J944-2022 Steering Control System - Passenger Car - Laboratory Test Procedure
SAE J338-1981 Motor Vehicle Instrument Panel Laboratory Impact Test Procedure-Knee-Leg Area
SAE J338-1968 Motor Vehicle Instrument Panel Laboratory Impact Test Procedure-Knee-Leg Area
SAE J2425-1998 Steering Control Systems - Laboratory Test Procedure Heavy Trucks
SAE J346-1968 SEATBACK ASSEMBLY LABORATORY IMPACT TEST PROCEDURE-HEAD AREA
SAE J921-1981 Motor Vehicle Instrument Panel Laboratory Impact Test Procedure-Head Area
SAE J346-1981 Motor Vehicle Seatback Assembly Laboratory Impact Test Procedure-Head Area

GM North America, In-lab comparison program

GM GM9125P-1991 Procedures for Laboratory Accelerated Exposure of Automotive Materials

ES-UNE, In-lab comparison program

UNE-EN 14742:2015 Characterization of sludges - Laboratory chemical conditioning procedure
UNE-EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018)
UNE-EN ISO 22117:2020 Microbiology of the food chain - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO 22117:2019)
UNE-EN 17136:2020 Water quality - Guidance on field and laboratory procedures for quantitative analysis and identification of macroinvertebrates from inland surface waters
UNE-EN ISO 10140-4:2022 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2021)
UNE 102045:2019 Procedure for monitoring and characterisation of installation of construction systems with gypsum plasterboards for laboratory measurements of airborne sound insulation

Hunan Provincial Standard of the People's Republic of China, In-lab comparison program

DB43/T 1952-2020 Technical regulations for artificial breeding of peach aphids in laboratory

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., In-lab comparison program

ASHRAE 68-1986 Laboratory Method of Testing In-Duct Sound Power Measurement Procedure for Fans (AMCA 330-86)
ASHRAE CH-99-13-1-1999 Integration of an Equation-Solving Program into an Energy Systems Laboratory Course
ASHRAE 4185-1998 Experimental Study of Free Convection at an Indoor Glazing Surface with a Venetian Blind (The Full Text of This Paper can be Found in the International Journal of Heating@ Ventilating@ Air-Conditioning and Refrigerating Research@ Volume 4@ Number 2@ April
ASHRAE 3705-1993 Comparative Study of Room Airflow: Numerical Prediction Using Computational Fluid Dynamics and Full- Scale Experimental Measurements

Professional Standard - Civil Aviation, In-lab comparison program

MH/T 6096-2013 Proficiency testing procedures for commercial aviation oil testing laboratory

Japanese Industrial Standards Committee (JISC), In-lab comparison program

JIS D 1061:1995 Steering control system laboratory impact test procedure for passenger cars
JIS Q 0043-2:1998 Proficiency testing by interlaboratory comparisons -- Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
JIS Q 0043-1:1998 Proficiency testing by interlaboratory comparisons -- Part 1: Development and operation of proficiency testing schemes

未注明发布机构, In-lab comparison program

BS 7530-1:1992(2007) Methods for Froth flotation testing of hard coal — Part 1 : Laboratory procedure

American National Standards Institute （ANSI), In-lab comparison program

ANSI/TAPPI T1211 sp-2011 Acceptance procedures for calibration laboratories providing reference materials for TAPPI Standards
ANSI/ASTM E2554:2013 Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method in a Single Laboratory Using a Control Sample Program

BE-NBN, In-lab comparison program

NBN S 01-201-1979 Acoustics - Determination of sound power levels of noise sources -Precision raethods for broad-band sources in reverberation rooms
NBN S 01-202-1979 Acoustics - Determination of sound power levels of noise sources -Precision methods for discrete-frequency and narrow-band sources in reverberation rooms

US-CLSI, In-lab comparison program

CLSI H18-A4-2010 Procedures for the Handling and Processing of Blood Specimens for Common Laboratory Tests

ANSI - American National Standards Institute, In-lab comparison program

N15.51-1990 Nuclear Materials Management - Measurement Control Program - Nuclear Materials Analytical Chemistry Laboratory (INMM)
N15.51-2007 Methods of Nuclear Material Control - Measurement Control Program – Nuclear Materials Analytical Chemistry Laboratory (INMM)

Xinjiang Provincial Standard of the People's Republic of China, In-lab comparison program

DB65/T 4553-2022 Specifications for biosafety risk monitoring procedures for novel coronavirus etiology laboratories

Standard Association of Australia （SAA）, In-lab comparison program

AS 2850:1986 Chemical analysis - Interlaboratory test programs - For determining precision of analytical method(s) - Guide to the planning and conduct

YU-JUS, In-lab comparison program

JUS U.J5.060-1983 Testing methods of heat transfer troughout of bilding constructtons in laboratory
JUS M.N4.813-1987 Braking of road vehicles, tractors and earth moving machiner/. Laboratory evaluation ofbrake functio-nal characteristics — test procedure

US-CFR-file, In-lab comparison program

CFR 40-1065.15-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.15:Overview of procedures for laboratory and field testing.
CFR 10-430.25-2014 Energy. Part430:Energy conservation program for consumer products. SubpartB:Test Procedures. Section430.25:Laboratory Accreditation Program.

IT-UNI, In-lab comparison program

UNI EN ISO 10140-4:2021 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements

Underwriters Laboratories (UL), In-lab comparison program

UL ECVP 2905-2023 UL Standard for Safety Environmental Claim Validation Procedure for Indoor Air Quality (IAQ) Sensor Performance

VN-TCVN, In-lab comparison program

TCVN 1773-13-1999 Agricultural wheeled tractors.Test procedures.Part13.Operator's seat.Laboratory measurement of transmitted vibration

National Association of Corrosion Engineers (NACE), In-lab comparison program

NACE TM0103-2003 Laboratory Test Procedures for Evaluation of SOHIC Resistance of Plate Steels Used in Wet H2S Service Item No:21242

AT-ON, In-lab comparison program

OENORM EN ISO 10140-4:2021 Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements (ISO 10140-4:2021)

Military Standard of the People's Republic of China-General Armament Department, In-lab comparison program

GJB 2765.5-1996 Data Network Protocol Conformance Testing and Conformance Evaluation Process Requirements for Testing Laboratories and Users

国家质量监督检验检疫总局, In-lab comparison program

SN/T 4301.3-2015 General Technical Requirements for Import and Export Textiles Part 3: Guidelines for Establishing Laboratory Standard Operating Procedures