ZH
RU
ES
colored noise
colored noise, Total:86 items.
In the international standard classification, colored noise involves: Acoustics and acoustic measurements, Agricultural machines, implements and equipment, Earth-moving machinery, Road engineering, Construction of railways, Protective equipment, Mobile services, Fibre optic communications.
Military Standard of the People's Republic of China-General Armament Department, colored noise
IET - Institution of Engineering and Technology, colored noise
Institute of Electrical and Electronics Engineers (IEEE), colored noise
National Metrological Verification Regulations of the People's Republic of China, colored noise
- JJG 721-2010 Verification Regulation of Phase Noise Measurement System
- JJG 721-1991 Verification Regulation of 500MHz Phase Noise Measurement Set (Phase Detector Method)
Association Francaise de Normalisation, colored noise
- NF U34-118:1992 Acoustics. Measurement at the operator'S position of airborne noise emitted by chain saws.
- NF U25-514:1992 Acoustics. Measurement at the operator's position of airborne noise emitted by brush saws.
- NF EN ISO 10848-4:2017 Acoustique - Mesurage en laboratoire des transmissions latérales du bruit aérien et des bruits de choc entre des pièces adjacentes - Partie 4 : Application aux jonctions ayant au moins un élément de Type A
- NF EN 1793-4:2015 Dispositifs de réduction du bruit du trafic routier - Méthode d'essai pour la détermination de la performance acoustique - Partie 4 : caractéristiques intrinsèques - Valeurs in-situ de la diffraction accoustique
- NF EN ISO 11201:2010 Acoustique - Bruit émis par les machines et équipements - Détermination des niveaux de pression acoustique d'émission au poste de travail et en d'autres positions spécifiées dans des conditions approchant celles du champ libre sur plan réfléc...
- NF S31-301-5*NF EN 1793-5:2016 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5 : intrinsic characteristics - In situ values of sound absorption under direct sound field conditions
- NF EN 1793-5:2016 Dispositifs de réduction du bruit du trafic routier - Méthode d'essai pour la détermination de la performance acoustique - Partie 5 : caractéristiques intrinsèques - Valeurs in situ de réflexion acoustique dans des conditions de champ acoustique...
- NF EN 1793-6+A1:2021 Dispositifs de réduction du bruit du trafic routier - Méthode d'essai pour la détermination de la performance acoustique - Partie 6 : caractéristiques intrinsèques - Valeurs in situ d'isolation aux bruits aériens dans des conditions de champ ac...
- NF EN 1793-6/IN1:2021 Dispositifs de réduction du bruit du trafic routier - Méthode d'essai pour la détermination de la performance acoustique - Partie 6 : caractéristiques intrinsèques - Valeurs in situ d'isolation aux bruits aériens dans des conditions de champ ac...
- NF S31-301-4*NF EN 1793-4:2015 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4 : intrinsic characteristics - In situ values of sound diffraction
- NF S31-301-6*NF EN 1793-6+A1:2021 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6 : intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
- NF S31-301-6/IN1*NF EN 1793-6/IN1:2021 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6 : intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
- NF EN 16272-4:2017 Applications ferroviaires - Voie - Dispositifs de réduction du bruit - Méthode d'essai pour la détermination des performances acoustiques - Partie 4 : caractéristiques intrinsèques - Valeurs in situ de la diffraction acoustique dans des condition...
- NF F90-727-2-1*NF EN 16727-2-1:2018 Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Non-acoustic performance - Part 2-1 : mechanical performance under dynamic loadings due to passing trains - Resistance to fatigue
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, colored noise
- GB/T 17248.4-1998 Acoustics--Noise emitted by machinery and equipment-- Determination of emission sound pressure level at a workstation and at other specified position from the sound power level
- GB/T 17248.2-1999 Acoustics--Noise emitted by machinery and equipment--Measurement of emission sound pressure levels at a work station and at other specified positions--Engineering method in an essentially free field over a reflecting plane
ZA-SANS, colored noise
- SANS 11203:1995 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
Taiwan Provincial Standard of the People's Republic of China, colored noise
- CNS 14656-2002 Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane
Professional Standard - Military and Civilian Products, colored noise
- WJ 2387-1997 Verification Regulations for Microwave and Millimeter Wave Phase Noise Test System
SE-SIS, colored noise
- SIS SS 459 37 48-1986 Acoustics - Determination of sound power levels of noise sources - Engineering method for small nearly omnidirectional sources under free-field conditions ?ver a reflecting plane
- SIS SS-ISO 454:1985 Acoustics — Relation between sound pressure levels of narrow bands of noise in a diffuse field and in a frontally-incident free-field for equal loudness
RU-GOST R, colored noise
- GOST ISO 11201-2016 Noise of machinery. Determination of emission sound pressure levels at a work station and at the other specified positions in an essentially free field over a reflecting plane
- GOST 31172-2003 Noise of machines. Measurement of emission sound pressure levels at a work station and at other specified positions. Engineering method in an essentially free field over a reflecting plane
Standard Association of Australia （SAA）, colored noise
- AS 2012.2:1990 Acoustics - Measurement of airborne noise emitted by earth-moving machinery and agricultural tractors - Stationary test condition - Operator's position
SAE - SAE International, colored noise
- SAE J/ISO 6396:2003 Acoustics Measurement at the operator’s position of noise emitted by earth-moving machinery Dynamic test conditions (This document is no longer maintained by SAE)
International Organization for Standardization (ISO), colored noise
- ISO 11201:1995 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane
European Committee for Standardization (CEN), colored noise
- EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
- EN ISO 11201:2009 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane
- EN 1793-4:2015 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction
- PD CEN/TS 16272-5:2014 Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field
- EN 1793-5:2016 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions
- EN 16727-2-1:2018 Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Nonacoustic performance - Part 2-1: Mechanical performance under dynamic loadings due to passing trains - Resistance to fatigue
- PD CEN/TS 16272-7:2015 Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 7: Extrinsic characteristics - In situ values of insertion loss
British Standards Institution (BSI), colored noise
- BS EN 1793-6:2018+A1:2021 Road traffic noise reducing devices. Test method for determining the acoustic performance - Intrinsic characteristics. In situ values of airborne sound insulation under direct sound field conditions
- DD ISO/TS 4869-5:2006 Acoustics. Hearing protectors - Method for estimation of noise reduction using fitting by inexperienced test subjects
- BS EN 62150-4:2010 Fibre optic active components and devices - Test and measurement procedures - Relative intensity noise using a time-domain optical detection system
ES-UNE, colored noise
- UNE-EN 1793-4:2015 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction
- UNE-EN 1793-5:2018 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions
- UNE-EN 1793-6:2019+A1:2022 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
- UNE-EN ISO 11201 V2:2010 ERRATUM:2011 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (IS...
German Institute for Standardization, colored noise
- DIN EN 1793-4:2023-08 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction; German and English version prEN 1793-4:2023 / Note: Date of issue 2023-07-21*Intended ...
- DIN EN 1793-4:2015-05 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction; German version EN 1793-4:2015 / Note: To be replaced by DIN EN 1793-4 (in preparation).
- DIN EN 1793-5:2018-12 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions; German version EN 1793-5:2016+AC:2018 / Note: To be...
- DIN EN 1793-6:2021-05 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions; German version EN 1793-6:2018+A1:2021
- DIN EN ISO 11201:2009 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995, including Co
- DIN EN 1793-6:2018 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
- DIN EN ISO 11201:2010-10 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (IS...
- DIN EN 1793-5:2018 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions (includes Corrigendum :2018)
- DIN EN 301247:2003 Digital cellular telecommunications system (Phase 2) - Comfort noise aspects for Enhanced Full Rate (EFR) speech traffic channels (GSM 06.62 version 4.0.1) (Endorsement of the English version EN 301247 V 4.0.1 (1997-12) as German standard)
- DIN EN 16272-3-1:2022 Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 3-1: Intrinsic characteristics - Normalized railway noise spectrum and single num
- DIN EN 16272-1:2022 Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics - Sound absorption in the laboratory under diffuse s
- DIN EN 1793-6/A1:2019 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions; German and English version EN 1793-6:2018/prA
- DIN EN 16272-3-1:2022-03 Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 3-1: Intrinsic characteristics - Normalized railway noise spectrum and single ...
Danish Standards Foundation, colored noise
- DS/CEN/TS 1793-5:2003 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection and airborne sound insulation
- DS/CEN/TS 1793-4:2004 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction
- DS/EN 1793-6:2021 Road traffic noise reducing devices – Test method for determining the acoustic performance – Part 6: Intrinsic characteristics – In situ values of airborne sound insulation under direct sound field conditions
- DS/EN 1793-6:2013 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
- DS/ISO/TS 4869-5:2007 Acoustics - Hearing protectors - Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects
- DS/EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
未注明发布机构, colored noise
- BS EN 1793-5:2016(2018) Road traffic noise reducing devices - Test method for determining the acoustic performance Part 5 : Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions
BE-NBN, colored noise
- NBN-ISO 6393:1992 Acoustics - Measurement of airborne noise emitted bu earth-moving machinery - Method for determining compliance with limits for exterior noise - Stationary test condition
Korean Agency for Technology and Standards (KATS), colored noise
- KS I ISO 11201:2018 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting
- KS I ISO 11201:2021 Acoustics — Noise emitted by machinery and equipment —Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting
KR-KS, colored noise
- KS I ISO 11201-2018 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting
- KS I ISO 11201-2021 Acoustics — Noise emitted by machinery and equipment —Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting
Society of Automotive Engineers (SAE), colored noise
- SAE J/ISO 6396-2003 Acoustics Measurement at the operator s position of noise emitted by earth-moving machinery Dynamic test conditions Identical to ISO 6396:1992; Superseding SAE J2105
国家市场监督管理总局、中国国家标准化管理委员会, colored noise
- GB/T 17248.2-2018 Acoustics—Noise emitted by machinery and equipment—Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
Lithuanian Standards Office , colored noise
- LST EN 1793-6-2013 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
- LST EN 1793-6+A1-2021 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
- LST EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995, including Co
IT-UNI, colored noise
- UNI EN 1793-6-2021 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
- UNI ISO 454:1977
PL-PKN, colored noise
- PN-EN 1793-6+A1-2021-09 E Road traffic noise reducing devices -- Test method for determining the acoustic performance -- Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
AENOR, colored noise
- UNE-EN 1793-6:2014 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
- UNE-EN ISO 11201:2010 V2 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 1