ZH
RU
ES
Tool microscope measurement
Tool microscope measurement, Total:201 items.
In the international standard classification, Tool microscope measurement involves: Optical equipment, Optics and optical measurements, Metrology and measurement in general, Welding, brazing and soldering, Nuclear energy engineering, Electrical wires and cables, Fluid power systems, Physics. Chemistry, Air quality, Textile fibres, Analytical chemistry, Surface treatment and coating, Linear and angular measurements, Electrical equipment for working in special conditions, Microbiology, Mechanical testing, Testing of metals, Test conditions and procedures in general, Materials for aerospace construction, Non-destructive testing, Coals, Wood technology processes, Electronic display devices.
Korean Agency for Technology and Standards (KATS), Tool microscope measurement
- KS B 5602-1995 Toolmakers’ microscopes
- KS B 5602-1995(2021) Toolmakers’ microscopes
- KS B 5602-1995(2016) Toolmakers’ microscopes
- KS I ISO 4407:2012 Hydraulic fluid power-Fluid contamination-Determination of particulate contamination by the counting method using an optical microscope
- KS D 2716-2008(2018) Measurement of nanoparticle diameter－Transmission electron microscope
- KS D 2714-2006 Scanning probe microscope-Method for lateral force microscope
- KS D 2716-2008 Measurement of nanoparticle diameter－Transmission electron microscope
- KS D 8544-2006 Metallic coating-Measurement of coating thickness-Transmission electron microscopy method
- KS E 4005-2007(2012) Portable polarizing microscope for sampling and determining incombustible matter in coal and rock-dust mixtures
- KS D 8544-2016(2021) Metallic coating－Measurement of coating thickness－Transmission electron microscopy method
- KS E 4005-1981 Portable polarizing microscope for sampling and determining incombustible matter in coal and rock-dust mixtures
- KS D 0204-2007 Steel-Determination of content of nonmetallic inclusions-Micrographic method using standard diagrams
- KS D ISO 9220:2009 Metallic coatings－Measurement of coating thickness－Scanning electron microscope method
- KS D ISO 9220-2009(2022) Metallic coatings－Measurement of coating thickness－Scanning electron microscope method
- KS D 8519-2009(2015) Metallic and oxide coating－Measurement of coating thickness－Microscopical method
- KS D ISO 9220-2009(2017) Metallic coatings－Measurement of coating thickness－Scanning electron microscope method
- KS D 0204-1982 Steel-Determination of content of nonmetallic inclusions-Micrographic method using standard diagrams
- KS I ISO 13794-2008(2018) Ambient air－Determination of asbestos fibres－Indirect-transfer transmission electron microscopy method
Professional Standard - Machinery, Tool microscope measurement
Taiwan Provincial Standard of the People's Republic of China, Tool microscope measurement
全国标准信息公共服务平台, Tool microscope measurement
Japanese Industrial Standards Committee (JISC), Tool microscope measurement
- JIS B 7153:1995 Measuring microscopes
- JIS B 7152:1991 Biological microscope objectives and eyepieces -- Methods of measurement of performance
- JIS K 3850-1:2000 Measuring method for airborne fibrous particles -- Part 1: Optical microscopy method and scanning electron microscopy method
- JIS M 8816:1992 Solid mineral fuels -- Methods of microscopical measurement for the macerals and reflectance
- JIS A 1481-4:2016 Air quality -- Bulk materials -- Part 4: Quantitative determination of asbestos by gravimetric and microscopical methods
National Metrological Verification Regulations of the People's Republic of China, Tool microscope measurement
- JJG 56-2000 Verification Regulation of Universal Measuring Microscopes and Makers Microscopes
- JJG(航天) 50-1988 Calibration Regulations for Tool Microscopes
- JJG 571-2004 Reading Microscope and Measuring Microscope
- JJG 571-1988 Verification Regulation of Measuring Microscope
RU-GOST R, Tool microscope measurement
- GOST 8.003-1983 State system for ensuring the uniformity of measurements. Tool-making microscopes. Methods and means of verification
- GOST 8.003-2010 State system for ensuring the uniformity of measurements. Tool-making microscopes. Verification procedure
- GOST R 8.594-2009 State system for ensuring the uniformity of measurements. Scanning electron microscopes
- GOST 8.211-1984 State system for ensuring the uniformity of measurements. Ocular screw micrometer. Methods and means of verification
- GOST R 8.631-2007 State system for ensuring the uniformity of measurements. Scanning electron microscopes. Methods for verification
- GOST R ISO 27911-2015 State system for ensuring the uniformity of measurements. Surface chemical analysis. Scanning-probe microscopy. Definition and calibration of the lateral resolution of a near-field optical microscope
- GOST R 8.636-2007 State system for ensuring the uniformity of measurements. Scanning electron microscopes. Methods for calibration
- GOST 8.594-2009 State system for ensuring the uniformity of measurements. Scanning electron microscopes. Method for verification
- GOST R 8.630-2007 State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Methods for verification
- GOST ISO 4407-2006 Industrial cleanliness. Determination of fluid contamination by the counting method using an optical microscope
- GOST 8.593-2009 State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Method for verification
- GOST R 8.635-2007 State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Method for calibration
IN-BIS, Tool microscope measurement
International Organization for Standardization (ISO), Tool microscope measurement
- ISO/TS 21383:2021 Microbeam analysis - Scanning electron microscopy - Qualification of the scanning electron microscope for quantitative measurements
- ISO 19056-3:2022 Microscopes — Definition and measurement of illumination properties — Part 3: Incident light fluorescence microscopy with incoherent light sources
- ISO 4912:1981 Textiles; Cotton fibres; Evaluation of maturity; Microscopic method
- ISO 19056-1:2015 Microscopes - Definition and measurement of illumination properties - Part 1: Image brightness and uniformity in bright field microscopy
- ISO 19056-2:2019 Microscopes — Definition and measurement of illumination properties — Part 2: Illumination properties related to the colour in bright field microscopy
- ISO 1463:2021 Metallic and oxide coatings — Measurement of coating thickness — Microscopical method
- ISO 9220:1988 Metallic coatings; measurement of coating thickness; scanning electron microscope method
- ISO 9220:2022 Metallic coatings — Measurement of coating thickness — Scanning electron microscope method
- ISO 21222:2020 Surface chemical analysis — Scanning probe microscopy — Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
- ISO/CD 22262-2:2011 Air quality — Bulk materials — Part 2: Quantitative determination of asbestos by gravimetric and microscopical methods
- ISO/DIS 23124:2023 Surface Chemical Analysis — Measurement of lateral and axial resolutions of Raman microscope
- ISO 11952:2019 Surface chemical analysis — Scanning-probe microscopy — Determination of geometric quantities using SPM: Calibration of measuring systems
- ISO 11952:2014 Surface chemical analysis - Scanning-probe microscopy - Determination of geometric quantities using SPM: Calibration of measuring systems
- ISO 23420:2021 Microbeam analysis — Analytical electron microscopy — Method for the determination of energy resolution for electron energy loss spectrum analysis
- ISO 19749:2021 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy
- ISO 18337:2015 Surface chemical analysis - Surface characterization - Measurement of the lateral resolution of a confocal fluorescence microscope
TH-TISI, Tool microscope measurement
- TIS 1083-1992 Standard for measurement of coating thickness by microscopical method
Association of German Mechanical Engineers, Tool microscope measurement
- DVS 2804-1975 Heated-tool welding (thermocompression welding) in microscopy (survey)
- VDI/VDE 2655 Blatt 1.1-2008 Optical measurement and microtopographies - Calibration of interference microscopes and depth measurement standards for roughness measurement
- VDI/VDE 2656 Blatt 1-2008 Determination of geometrical quantities by using of Scanning Probe Microscopes - Calibration of measurement systems
- VDI/VDE 2655 Blatt 1.2-2010 Optical measurement of microtopography - Calibration of confocal microscopes and depth setting standards for roughness measurement
- VDI 3492-2004 Indoor air measurement - Ambient air measurement - Measurement of inorganic fibrous particles - Scanning electron microscopy method
- VDI 3492-2013 Indoor air measurement - Ambient air measurement - Measurement of inorganic fibrous particles - Scanning electron microscopy method
- VDI 3861 Blatt 2-2008 Stationary source emissions - Measurement of inorganic fibrous particles in exhaust gas - Scanning electron microscopy method
Professional Standard - Nuclear Industry, Tool microscope measurement
- EJ/T 20176-2018 Atomic Force Microscope Measuring Method of Edge Sharpness of Diamond Tool
American Society for Testing and Materials (ASTM), Tool microscope measurement
- ASTM F728-81(1997)e1 Standard Practice for Preparing An Optical Microscope for Dimensional Measurements
- ASTM F72-95(2001) Standard Specification for Gold Wire for Semiconductor Lead Bonding
- ASTM E3060-16 Standard Guide for Subvisible Particle Measurement in Biopharmaceutical Manufacturing Using Dynamic (Flow) Imaging Microscopy
- ASTM E2090-00 Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Clean Room Wipers Using Optical and Scanning Electron Microscopy
- ASTM E2090-12 Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy
- ASTM E2859-11(2017) Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy
- ASTM E285-08(2015) Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials
- ASTM E1813-96e1 Standard Practice for Measuring and Reporting Probe Tip Shape in Scanning Probe Microscopy
- ASTM E1813-96(2002) Standard Practice for Measuring and Reporting Probe Tip Shape in Scanning Probe Microscopy
- ASTM E1813-96(2007) Standard Practice for Measuring and Reporting Probe Tip Shape in Scanning Probe Microscopy
- ASTM E2859-11 Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy
- ASTM E2859-11(2023) Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy
- ASTM D5235-13 Standard Test Method for Microscopical Measurement of Dry Film Thickness of Coatings on Wood Products
- ASTM D5235-14 Standard Test Method for Microscopic Measurement of Dry Film Thickness of Coatings on Wood Products
- ASTM B748-90(2006) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
- ASTM B748-90(1997) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
- ASTM D5235-18 Standard Test Method for Microscopic Measurement of Dry Film Thickness of Coatings on Wood Products
- ASTM D7201-06(2011) Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with an Option of Transmission Electron Microscopy)
- ASTM D5235-97 Standard Test Method for Microscopical Measurement of Dry Film Thickness of Coatings on Wood Products
- ASTM B748-90(2021) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
- ASTM B748-90(2001) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
- ASTM B748-90(2016) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
- ASTM B748-90(2010) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
(U.S.) Ford Automotive Standards, Tool microscope measurement
HU-MSZT, Tool microscope measurement
Professional Standard - Petrochemical Industry, Tool microscope measurement
- SH/T 0336-1994 Determination method of grease impurity content (microscopic method)
British Standards Institution (BSI), Tool microscope measurement
- BS ISO 19056-3:2022 Microscopes. Definition and measurement of illumination properties - Incident light fluorescence microscopy with incoherent light sources
- BS ISO 19056-2:2019 Microscopes. Definition and measurement of illumination properties - Illumination properties related to the colour in bright field microscopy
- BS ISO 19056-1:2015 Microscopes. Definition and measurement of illumination properties. Image brightness and uniformity in bright field microscopy
- BS EN ISO 9220:1989 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method
- 18/30339980 DC BS ISO 19056-2. Microscopes. Definition and measurement of illumination properties. Part 2. Illumination properties related to the colour in bright field microscopy
- 21/30395346 DC BS ISO 19056-3. Microscopes. Definition and measurement of illumination properties. Part 3. Incident light fluorescence microscopy with incoherent light sources
- BS IEC 63145-21-20:2022 Eyewear display - Specific measurement methods for VR image quality. Screen door effect
- BS ISO 21222:2020 Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
- 19/30351707 DC BS ISO 21222. Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
- 21/30394409 DC BS ENISO 9220. Metallic coatings. Measurement of coating thickness. Scanning electron microscope method
- BS ISO 23420:2021 Microbeam analysis. Analytical electron microscopy. Method for the determination of energy resolution for electron energy loss spectrum analysis
- BS ISO 19749:2021 Nanotechnologies. Measurements of particle size and shape distributions by scanning electron microscopy
- 20/30395419 DC BS EN ISO 1463. Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
- BS EN ISO 9220:2022 Tracked Changes. Metallic coatings. Measurement of coating thickness. Scanning electron microscope method
- BS ISO 22262-2:2014 Air quality. Bulk materials. Quantitative determination of asbestos by gravimetric and microscopical methods
- BS EN ISO 21363:2022 Nanotechnologies. Measurements of particle size and shape distributions by transmission electron microscopy
- BS EN ISO 19749:2023 Nanotechnologies. Measurements of particle size and shape distributions by scanning electron microscopy
- BS ISO 21363:2020 Nanotechnologies. Measurements of particle size and shape distributions by transmission electron microscopy
- 20/30380369 DC BS ISO 23420. Microbeam analysis. Analytical electron microscopy. Method for the determination of energy resolution for electron energy loss spectrum analysis
- BS ISO 18337:2015 Surface chemical analysis. Surface characterization. Measurement of the lateral resolution of a confocal fluorescence microscope
- 23/30420097 DC BS ISO 23124 Surface Chemical Analysis. Measurement of lateral and axial resolutions of Raman microscope
- BS ISO 11952:2019 Surface chemical analysis. Scanning-probe microscopy. Determination of geometric quantities using SPM: Calibration of measuring systems
- BS ISO 8672:2014 Air quality. Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy. Membrane filter method
Group Standards of the People's Republic of China, Tool microscope measurement
CZ-CSN, Tool microscope measurement
- CSN 65 6337-1974 Determination of mechanical impurities content using a microscope
- CSN ISO 1463:1993 Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Tool microscope measurement
- GB/T 29190-2012 Measurement methods of drift rate of scanning probe microscope
- GB/T 6462-2005 Metallic and oxide coatings-Measurement of coating thinckness-Microscopical method
- GB/T 42659-2023 Surface Chemical Analysis Scanning Probe Microscopy Determination of Geometric Quantities Using Scanning Probe Microscopy: Measurement System Calibration
- GB/T 31227-2014 Test method for the surface roughness by atomic force microscope for sputtered thin films
- GB/T 32282-2015 Measurement of Dislocation Density in Gallium Nitride Single Crystal by Cathodoluminescence Microscopy
- GB/T 6462-1986 Metallic and oxide coatings--Measurement of coating thickness--Microscopical method
VN-TCVN, Tool microscope measurement
- TCVN 6035-1995 Textiles.Cotton fibres.Evaluation of maturity.Microscopic method
PT-IPQ, Tool microscope measurement
Institute of Interconnecting and Packaging Electronic Circuits (IPC), Tool microscope measurement
KR-KS, Tool microscope measurement
- KS D 2716-2023 Measurement of nanoparticle diameter — Transmission electron microscope
- KS C ISO 19749-2023 Nanotechnologies — Measurements of particle size and shape distributions by scanning electron microscopy
- KS C ISO 21363-2023 Nanotechnologies — Measurements of particle size and shape distributions by transmission electron microscopy
FI-SFS, Tool microscope measurement
Association Francaise de Normalisation, Tool microscope measurement
- NF G06-008*NF EN ISO 20705:2020 Textiles - Quantitative microscopical analysis - General principles of testing
- NF EN ISO 20705:2020 Textiles - Analyse quantitative par microscopie - Principes généraux des essais
- NF A91-110:2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method.
- NF A91-110*NF EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
- NF A91-108:1995 Metallic coatings. Measurement of coating thickness. Scanning electron microscope method.
- NF A91-108*NF EN ISO 9220:2022 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method
- NF EN ISO 9220:2022 Revêtements métalliques - Mesurage de l'épaisseur de revêtement - Méthode au microscope électronique à balayage
- NF T16-404:2020 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy
- NF T16-403*NF ISO 19749:2021 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy
- NF T16-404*NF EN ISO 21363:2022 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy
- NF X43-050:2021 Air quality - Determination of the asbestos fiber concentration by transmission electron microscopy - Indirect method
- NF X43-050:1996 Air quality. Determination of the asbestos fiber concentration by transmission electron microscopy. Indirect method.
SE-SIS, Tool microscope measurement
- SIS SS-ISO 1463:1983 Meta I lic and oxide coatings - Measure- ment of coating thickness - Microscopi- cal method
- SIS SS-ISO 9220:1989 Metallic coatings — Measurements of coating thickness — Scanning electron microscope method
- SIS SS 11 11 15-1985 Steel - Method for assessing the slag inclusion content - Microscopic methods - Manual counting of particles and calculation of size-distribution
- SIS SMS 2953-1971 Measurement of metal and oxide coating thicknesses by microscopic examination of cross-sections
RO-ASRO, Tool microscope measurement
- STAS 10552-1976 DETERMINATION OF THE DELTA-FERRITE CONTENT IN THE DEPOSITED METAL BY WELDING OF AUSTENITICAL STEELS Microscopic method
- STAS 9070-1981 WOOL Determination of fibre diameter and of content of medullated fibres by tlie projection microscope
ZA-SANS, Tool microscope measurement
- SANS 144:1982 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
- SANS 5949:2005 Tool steels and bearing steels - Micrographic method for assessing the distribution of carbides using reference photomicrographs
German Institute for Standardization, Tool microscope measurement
- DIN 58959-4:1997 Quality management in medical microbiology - Part 4: Requirements for investigations using light microscopes
- DIN EN ISO 9220:2022-05 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:2022); German version EN ISO 9220:2022
- DIN SPEC 52407:2015-03 Nanotechnologies - Methods for preparation and assessment for particle measurements with atomic force microscopy (AFM) and transmission scanning electron microscopy (TSEM)
- DIN EN ISO 9220:2021 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO/DIS 9220:2021); German and English version prEN ISO 9220:2021
European Committee for Standardization (CEN), Tool microscope measurement
- EN ISO 9220:2022 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:2022)
- EN ISO 9220:1994 Metallic Coatings - Measurement of Coating Thickness - Scanning Electron Microscope Method (ISO 9220 : 1988)
- EN ISO 19749:2023 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021)
- prEN ISO 9220:2021 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO/DIS 9220:2021)
- prEN ISO 21363:2021 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020)
Danish Standards Foundation, Tool microscope measurement
- DS/EN ISO 1463:1994 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
- DS/EN ISO 9220:1995 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method
- DS/ISO 19749:2021 Nanotechnologies – Measurements of particle size and shape distributions by scanning electron microscopy
- DS/EN ISO 1463:2021 Metallic and oxide coatings – Measurement of coating thickness – Microscopical method (ISO 1463:2021)
PL-PKN, Tool microscope measurement
- PN C05551-1987 Water and waste water Determination of the phytoplankton ?uantity by using the inverted microscope
ES-UNE, Tool microscope measurement
- UNE-EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
- UNE-EN ISO 9220:2022 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:2022)
- UNE-EN ISO 19749:2023 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021) (Endorsed by Asociación Española de Normalización in May of 2023.)
- UNE-EN ISO 21363:2022 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020) (Endorsed by Asociación Española de Normalización in February of 2022.)
国家市场监督管理总局、中国国家标准化管理委员会, Tool microscope measurement
- GB/T 40066-2021 Nanotechnologies—Thickness measurement of graphene oxide—Atomic Force Microscopy (AFM)
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Tool microscope measurement
- GJB 5891.5-2006 Test method of loading material for initiating explosive device Part 5: Measurement of grain size Microscopy
PH-BPS, Tool microscope measurement
- PNS ISO 21363:2021 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy
Professional Standard - Commodity Inspection, Tool microscope measurement
- SN/T 3231-2012 Determination of asbestos in talcum.Polarized light microscope and X-ray diffraction method
AENOR, Tool microscope measurement
- UNE-EN ISO 9220:1996 METALLIC COATINGS. MEASUREMENT OF COATING THICKNESS. SCANNING ELECTRON MICROSCOPE METHOD. (ISO 9220:1988).
- UNE-EN ISO 1463:2005 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003)
Lithuanian Standards Office , Tool microscope measurement
- LST EN ISO 9220:2001 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:1988)
- LST EN ISO 1463:2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003)
- LST EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
AT-ON, Tool microscope measurement
- OENORM EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
- OENORM EN ISO 9220:2021 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO/DIS 9220:2021)
- OENORM EN ISO 21363:2021 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020)
CH-SNV, Tool microscope measurement
- SN EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
IT-UNI, Tool microscope measurement
NO-SN, Tool microscope measurement
- NS 1181-1979 Metal and oxide coating - Measurement of thickness by microscopical examination of cross-sections
CU-NC, Tool microscope measurement
- NC 90-01-50-1987 Metrological Assurance. Instrumentation Microscopes Methods and Means of Verification
Professional Standard - Aviation, Tool microscope measurement
- HB 5931.8-1989 Contamination Test of Aircraft Hydraulic System - Determination of Solid Pollution Degree of Working Fluid by Microscope Contrast Method
Military Standard of the People's Republic of China-General Armament Department, Tool microscope measurement
- GJB 380.8-1998 Contamination test of aircraft hydraulic system using microscope comparison method to determine the solid contamination degree of working fluid
International Electrotechnical Commission (IEC), Tool microscope measurement
- IEC 63145-21-20:2022 Eyewear display - Part 21-20: Specific measurement methods for VR image quality - Screen door effect
工业和信息化部, Tool microscope measurement
- SJ/T 11759-2020 Measurement of Photovoltaic Cell Electrode Grid Line Aspect Ratio Laser Scanning Confocal Microscopy
American National Standards Institute （ANSI), Tool microscope measurement
- ANSI/ASTM D6057:2001 Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy